Each WAL record now carries information about the modified relation and
block(s) in a standardized format. That makes it easier to write tools that
need that information, like pg_rewind, prefetching the blocks to speed up
recovery, etc.
There's a whole new API for building WAL records, replacing the XLogRecData
chains used previously. The new API consists of XLogRegister* functions,
which are called for each buffer and chunk of data that is added to the
record. The new API also gives more control over when a full-page image is
written, by passing flags to the XLogRegisterBuffer function.
This also simplifies the XLogReadBufferForRedo() calls. The function can dig
the relation and block number from the WAL record, so they no longer need to
be passed as arguments.
For the convenience of redo routines, XLogReader now disects each WAL record
after reading it, copying the main data part and the per-block data into
MAXALIGNed buffers. The data chunks are not aligned within the WAL record,
but the redo routines can assume that the pointers returned by XLogRecGet*
functions are. Redo routines are now passed the XLogReaderState, which
contains the record in the already-disected format, instead of the plain
XLogRecord.
The new record format also makes the fixed size XLogRecord header smaller,
by removing the xl_len field. The length of the "main data" portion is now
stored at the end of the WAL record, and there's a separate header after
XLogRecord for it. The alignment padding at the end of XLogRecord is also
removed. This compansates for the fact that the new format would otherwise
be more bulky than the old format.
Reviewed by Andres Freund, Amit Kapila, Michael Paquier, Alvaro Herrera,
Fujii Masao.
This function has a loop which can lead to uninterruptible process
"stalls" (actually infinite loops) when some bugs are triggered. Avoid
that unpleasant situation by adding a check for interrupts in a place
that shouldn't degrade performance in the normal case.
Backpatch to 9.3. Older branches have an identical loop here, but the
aforementioned bugs are only a problem starting in 9.3 so there doesn't
seem to be any point in backpatching any further.
xlog.c is huge, this makes it a little bit smaller, which is nice. Functions
related to putting together the WAL record are in xloginsert.c, and the
lower level stuff for managing WAL buffers and such are in xlog.c.
Also move the definition of XLogRecord to a separate header file. This
causes churn in the #includes of all the files that write WAL records, and
redo routines, but it avoids pulling in xlog.h into most places.
Reviewed by Michael Paquier, Alvaro Herrera, Andres Freund and Amit Kapila.
Commit 0ac5ad5134 removed an optimization in multixact.c that skipped
fetching members of MultiXactId that were older than our
OldestVisibleMXactId value. The reason this was removed is that it is
possible for multixacts that contain updates to be older than that
value. However, if the caller is certain that the multi does not
contain an update (because the infomask bits say so), it can pass this
info down to GetMultiXactIdMembers, enabling it to use the old
optimization.
Pointed out by Andres Freund in 20131121200517.GM7240@alap2.anarazel.de
Instead of truncating pg_multixact at vacuum time, do it only at
checkpoint time. The reason for doing it this way is twofold: first, we
want it to delete only segments that we're certain will not be required
if there's a crash immediately after the removal; and second, we want to
do it relatively often so that older files are not left behind if
there's an untimely crash.
Per my proposal in
http://www.postgresql.org/message-id/20140626044519.GJ7340@eldon.alvh.no-ip.org
we now execute the truncation in the checkpointer process rather than as
part of vacuum. Vacuum is in only charge of maintaining in shared
memory the value to which it's possible to truncate the files; that
value is stored as part of checkpoints also, and so upon recovery we can
reuse the same value to re-execute truncate and reset the
oldest-value-still-safe-to-use to one known to remain after truncation.
Per bug reported by Jeff Janes in the course of his tests involving
bug #8673.
While at it, update some comments that hadn't been updated since
multixacts were changed.
Backpatch to 9.3, where persistency of pg_multixact files was
introduced by commit 0ac5ad5134.
In a50d976254 I already changed this, but got it wrong for the case
where the number of members is larger than the number of entries that
fit in the last page of the last segment.
As reported by Serge Negodyuck in a followup to bug #8673.
If a tuple is locked, and this lock is later upgraded either to an
update or to a stronger lock, and in the meantime some other process
tries to lock, update or delete the same tuple, it (the tuple) could end
up being updated twice, or having conflicting locks held.
The reason for this is that the second updater checks for a change in
Xmax value, or in the HEAP_XMAX_IS_MULTI infomask bit, after noticing
the first lock; and if there's a change, it restarts and re-evaluates
its ability to update the tuple. But it neglected to check for changes
in lock strength or in lock-vs-update status when those two properties
stayed the same. This would lead it to take the wrong decision and
continue with its own update, when in reality it shouldn't do so but
instead restart from the top.
This could lead to either an assertion failure much later (when a
multixact containing multiple updates is detected), or duplicate copies
of tuples.
To fix, make sure to compare the other relevant infomask bits alongside
the Xmax value and HEAP_XMAX_IS_MULTI bit, and restart from the top if
necessary.
Also, in the belt-and-suspenders spirit, add a check to
MultiXactCreateFromMembers that a multixact being created does not have
two or more members that are claimed to be updates. This should protect
against other bugs that might cause similar bogus situations.
Backpatch to 9.3, where the possibility of multixacts containing updates
was introduced. (In prior versions it was possible to have the tuple
lock upgraded from shared to exclusive, and an update would not restart
from the top; yet we're protected against a bug there because there's
always a sleep to wait for the locking transaction to complete before
continuing to do anything. Really, the fact that tuple locks always
conflicted with concurrent updates is what protected against bugs here.)
Per report from Andrew Dunstan and Josh Berkus in thread at
http://www.postgresql.org/message-id/534C8B33.9050807@pgexperts.com
Bug analysis by Andres Freund.
Previously we were piggybacking on transaction ID parameters to freeze
multixacts; but since there isn't necessarily any relationship between
rates of Xid and multixact consumption, this turns out not to be a good
idea.
Therefore, we now have multixact-specific freezing parameters:
vacuum_multixact_freeze_min_age: when to remove multis as we come across
them in vacuum (default to 5 million, i.e. early in comparison to Xid's
default of 50 million)
vacuum_multixact_freeze_table_age: when to force whole-table scans
instead of scanning only the pages marked as not all visible in
visibility map (default to 150 million, same as for Xids). Whichever of
both which reaches the 150 million mark earlier will cause a whole-table
scan.
autovacuum_multixact_freeze_max_age: when for cause emergency,
uninterruptible whole-table scans (default to 400 million, double as
that for Xids). This means there shouldn't be more frequent emergency
vacuuming than previously, unless multixacts are being used very
rapidly.
Backpatch to 9.3 where multixacts were made to persist enough to require
freezing. To avoid an ABI break in 9.3, VacuumStmt has a couple of
fields in an unnatural place, and StdRdOptions is split in two so that
the newly added fields can go at the end.
Patch by me, reviewed by Robert Haas, with additional input from Andres
Freund and Tom Lane.
In the 9.2 code for extending multixact/members, the logic was very
simple because the number of entries in a members page was a proper
divisor of 2^32, and thus at 2^32 wraparound the logic for page switch
was identical than at any other page boundary. In commit 0ac5ad5134 I
failed to realize this and introduced code that was not able to go over
the 2^32 boundary. Fix that by ensuring that when we reach the last
page of the last segment we correctly zero the initial page of the
initial segment, using correct uint32-wraparound-safe arithmetic.
Noticed while investigating bug #8673 reported by Serge Negodyuck, as
diagnosed by Andres Freund.
In pg_multixact/members, relying on modulo-2^32 arithmetic for
wraparound handling doesn't work all that well. Because we don't
explicitely track wraparound of the allocation counter for members, it
is possible that the "live" area exceeds 2^31 entries; trying to remove
SLRU segments that are "old" according to the original logic might lead
to removal of segments still in use. To fix, have the truncation
routine use a tailored SlruScanDirectory callback that keeps track of
the live area in actual use; that way, when the live range exceeds 2^31
entries, the oldest segments still live will not get removed untimely.
This new SlruScanDir callback needs to take care not to remove segments
that are "in the future": if new SLRU segments appear while the
truncation is ongoing, make sure we don't remove them. This requires
examination of shared memory state to recheck for false positives, but
testing suggests that this doesn't cause a problem. The original coding
didn't suffer from this pitfall because segments created when truncation
is running are never considered to be removable.
Per Andres Freund's investigation of bug #8673 reported by Serge
Negodyuck.
If a tuple was locked by transaction A, and transaction B updated it,
the new version of the tuple created by B would be locked by A, yet
visible only to B; due to an oversight in HeapTupleSatisfiesUpdate, the
lock held by A wouldn't get checked if transaction B later deleted (or
key-updated) the new version of the tuple. This might cause referential
integrity checks to give false positives (that is, allow deletes that
should have been rejected).
This is an easy oversight to have made, because prior to improved tuple
locks in commit 0ac5ad5134 it wasn't possible to have tuples created by
our own transaction that were also locked by remote transactions, and so
locks weren't even considered in that code path.
It is recommended that foreign keys be rechecked manually in bulk after
installing this update, in case some referenced rows are missing with
some referencing row remaining.
Per bug reported by Daniel Wood in
CAPweHKe5QQ1747X2c0tA=5zf4YnS2xcvGf13Opd-1Mq24rF1cQ@mail.gmail.com
Tuple freezing was broken in connection to MultiXactIds; commit
8e53ae025d tried to fix it, but didn't go far enough. As noted by
Noah Misch, freezing a tuple whose Xmax is a multi containing an aborted
update might cause locks in the multi to go ignored by later
transactions. This is because the code depended on a multixact above
their cutoff point not having any lock-only member older than the cutoff
point for Xids, which is easily defeated in READ COMMITTED transactions.
The fix for this involves creating a new MultiXactId when necessary.
But this cannot be done during WAL replay, and moreover multixact
examination requires using CLOG access routines which are not supposed
to be used during WAL replay either; so tuple freezing cannot be done
with the old freeze WAL record. Therefore, separate the freezing
computation from its execution, and change the WAL record to carry all
necessary information. At WAL replay time, it's easy to re-execute
freezing because we don't need to re-compute the new infomask/Xmax
values but just take them from the WAL record.
While at it, restructure the coding to ensure all page changes occur in
a single critical section without much room for failures. The previous
coding wasn't using a critical section, without any explanation as to
why this was acceptable.
In replication scenarios using the 9.3 branch, standby servers must be
upgraded before their master, so that they are prepared to deal with the
new WAL record once the master is upgraded; failure to do so will cause
WAL replay to die with a PANIC message. Later upgrade of the standby
will allow the process to continue where it left off, so there's no
disruption of the data in the standby in any case. Standbys know how to
deal with the old WAL record, so it's okay to keep the master running
the old code for a while.
In master, the old freeze WAL record is gone, for cleanliness' sake;
there's no compatibility concern there.
Backpatch to 9.3, where the original bug was introduced and where the
previous fix was backpatched.
Álvaro Herrera and Andres Freund
The original performs too poorly; in some scenarios it shows way too
high while profiling. Try to make it a bit smarter to avoid excessive
cosst. In particular, make it have a maximum size, and have entries be
sorted in LRU order; once the max size is reached, evict the oldest
entry to avoid it from growing too large.
Per complaint from Andres Freund in connection with new tuple freezing
code.
Both heap_freeze_tuple() and heap_tuple_needs_freeze() neglected to look
into a multixact to check the members against cutoff_xid. This means
that a very old Xid could survive hidden within a multi, possibly
outliving its CLOG storage. In the distant future, this would cause
clog lookup failures:
ERROR: could not access status of transaction 3883960912
DETAIL: Could not open file "pg_clog/0E78": No such file or directory.
This mostly was problematic when the updating transaction aborted, since
in that case the row wouldn't get pruned away earlier in vacuum and the
multixact could possibly survive for a long time. In many cases, data
that is inaccessible for this reason way can be brought back
heuristically.
As a second bug, heap_freeze_tuple() didn't properly handle multixacts
that need to be frozen according to cutoff_multi, but whose updater xid
is still alive. Instead of preserving the update Xid, it just set Xmax
invalid, which leads to both old and new tuple versions becoming
visible. This is pretty rare in practice, but a real threat
nonetheless. Existing corrupted rows, unfortunately, cannot be repaired
in an automated fashion.
Existing physical replicas might have already incorrectly frozen tuples
because of different behavior than in master, which might only become
apparent in the future once pg_multixact/ is truncated; it is
recommended that all clones be rebuilt after upgrading.
Following code analysis caused by bug report by J Smith in message
CADFUPgc5bmtv-yg9znxV-vcfkb+JPRqs7m2OesQXaM_4Z1JpdQ@mail.gmail.com
and privately by F-Secure.
Backpatch to 9.3, where freezing of MultiXactIds was introduced.
Analysis and patch by Andres Freund, with some tweaks by Álvaro.
Commit 9dc842f08 of 8.2 era prevented MultiXact truncation during crash
recovery, because there was no guarantee that enough state had been
setup, and because it wasn't deemed to be a good idea to remove data
during crash recovery anyway. Since then, due to Hot-Standby, streaming
replication and PITR, the amount of time a cluster can spend doing crash
recovery has increased significantly, to the point that a cluster may
even never come out of it. This has made not truncating the content of
pg_multixact/ not defensible anymore.
To fix, take care to setup enough state for multixact truncation before
crash recovery starts (easy since checkpoints contain the required
information), and move the current end-of-recovery actions to a new
TrimMultiXact() function, analogous to TrimCLOG().
At some later point, this should probably done similarly to the way
clog.c is doing it, which is to just WAL log truncations, but we can't
do that for the back branches.
Back-patch to 9.0. 8.4 also has the problem, but since there's no hot
standby there, it's much less pressing. In 9.2 and earlier, this patch
is simpler than in newer branches, because multixact access during
recovery isn't required. Add appropriate checks to make sure that's not
happening.
Andres Freund
While autovacuum dutifully launched anti-multixact-wraparound vacuums
when the multixact "age" was reached, the vacuum code was not aware that
it needed to make them be full table vacuums. As the resulting
partial-table vacuums aren't capable of actually increasing relminmxid,
autovacuum continued to launch anti-wraparound vacuums that didn't have
the intended effect, until age of relfrozenxid caused the vacuum to
finally be a full table one via vacuum_freeze_table_age.
To fix, introduce logic for multixacts similar to that for plain
TransactionIds, using the same GUCs.
Backpatch to 9.3, where permanent MultiXactIds were introduced.
Andres Freund, some cleanup by Álvaro
Parts of the code used autovacuum_freeze_max_age to determine whether
anti-multixact-wraparound vacuums are necessary, while others used a
hardcoded 200000000 value. This leads to problems when
autovacuum_freeze_max_age is set to a non-default value. Use the latter
everywhere.
Backpatch to 9.3, where vacuuming of multixacts was introduced.
Andres Freund
It seems to make more sense to use "cutoff multixact" terminology
throughout the backend code; "freeze" is associated with replacing of an
Xid with FrozenTransactionId, which is not what we do for MultiXactIds.
Andres Freund
Some adjustments by Álvaro Herrera
When upgrading from servers of versions 9.2 and older, and MultiXactIds
have been used in the old server beyond the first page (that is, 2048
multis or more in the default 8kB-page build), pg_upgrade would set the
next multixact offset to use beyond what has been allocated in the new
cluster. This would cause a failure the first time the new cluster
needs to use this value, because the pg_multixact/offsets/ file wouldn't
exist or wouldn't be large enough. To fix, ensure that the transient
server instances launched by pg_upgrade extend the file as necessary.
Per report from Jesse Denardo in
CANiVXAj4c88YqipsyFQPboqMudnjcNTdB3pqe8ReXqAFQ=HXyA@mail.gmail.com
Make slightly better decisions about indentation than what pgindent
is capable of. Mostly breaking out long function calls into one
line per argument, with a few other minor adjustments.
No functional changes- all whitespace.
pgindent ran cleanly (didn't change anything) after.
Passes all regressions.
This patch introduces two additional lock modes for tuples: "SELECT FOR
KEY SHARE" and "SELECT FOR NO KEY UPDATE". These don't block each
other, in contrast with already existing "SELECT FOR SHARE" and "SELECT
FOR UPDATE". UPDATE commands that do not modify the values stored in
the columns that are part of the key of the tuple now grab a SELECT FOR
NO KEY UPDATE lock on the tuple, allowing them to proceed concurrently
with tuple locks of the FOR KEY SHARE variety.
Foreign key triggers now use FOR KEY SHARE instead of FOR SHARE; this
means the concurrency improvement applies to them, which is the whole
point of this patch.
The added tuple lock semantics require some rejiggering of the multixact
module, so that the locking level that each transaction is holding can
be stored alongside its Xid. Also, multixacts now need to persist
across server restarts and crashes, because they can now represent not
only tuple locks, but also tuple updates. This means we need more
careful tracking of lifetime of pg_multixact SLRU files; since they now
persist longer, we require more infrastructure to figure out when they
can be removed. pg_upgrade also needs to be careful to copy
pg_multixact files over from the old server to the new, or at least part
of multixact.c state, depending on the versions of the old and new
servers.
Tuple time qualification rules (HeapTupleSatisfies routines) need to be
careful not to consider tuples with the "is multi" infomask bit set as
being only locked; they might need to look up MultiXact values (i.e.
possibly do pg_multixact I/O) to find out the Xid that updated a tuple,
whereas they previously were assured to only use information readily
available from the tuple header. This is considered acceptable, because
the extra I/O would involve cases that would previously cause some
commands to block waiting for concurrent transactions to finish.
Another important change is the fact that locking tuples that have
previously been updated causes the future versions to be marked as
locked, too; this is essential for correctness of foreign key checks.
This causes additional WAL-logging, also (there was previously a single
WAL record for a locked tuple; now there are as many as updated copies
of the tuple there exist.)
With all this in place, contention related to tuples being checked by
foreign key rules should be much reduced.
As a bonus, the old behavior that a subtransaction grabbing a stronger
tuple lock than the parent (sub)transaction held on a given tuple and
later aborting caused the weaker lock to be lost, has been fixed.
Many new spec files were added for isolation tester framework, to ensure
overall behavior is sane. There's probably room for several more tests.
There were several reviewers of this patch; in particular, Noah Misch
and Andres Freund spent considerable time in it. Original idea for the
patch came from Simon Riggs, after a problem report by Joel Jacobson.
Most code is from me, with contributions from Marti Raudsepp, Alexander
Shulgin, Noah Misch and Andres Freund.
This patch was discussed in several pgsql-hackers threads; the most
important start at the following message-ids:
AANLkTimo9XVcEzfiBR-ut3KVNDkjm2Vxh+t8kAmWjPuv@mail.gmail.com1290721684-sup-3951@alvh.no-ip.org1294953201-sup-2099@alvh.no-ip.org1320343602-sup-2290@alvh.no-ip.org1339690386-sup-8927@alvh.no-ip.org4FE5FF020200002500048A3D@gw.wicourts.gov4FEAB90A0200002500048B7D@gw.wicourts.gov
Originally, most of this code assumed that no Postgres backends could be
running concurrently with it, and so no locking could be needed. That
assumption fails in Hot Standby. While it's still true that Hot Standby
backends should never change values like nextXid, they can examine them,
and consistency is important in some cases such as when computing a
snapshot. Therefore, prudence requires that WAL replay code obtain the
relevant locks when modifying such variables, even though it can examine
them without taking a lock. We were following that coding rule in some
places but not all. This commit applies the coding rule uniformly to all
updates of ShmemVariableCache and MultiXactState fields; a search of the
replay routines did not find any other cases that seemed to be at risk.
In addition, this commit fixes a longstanding thinko in replay of NEXTOID
and checkpoint records: we tried to advance nextOid only if it was behind
the value in the WAL record, but the comparison would draw the wrong
conclusion if OID wraparound had occurred since the previous value.
Better to just unconditionally assign the new value, since OID assignment
shouldn't be happening during replay anyway.
The additional locking seems to be more in the nature of future-proofing
than fixing any live bug, so I am not going to back-patch it. The NEXTOID
fix will be back-patched separately.
Instead, declare a public wrapper of the sole function using it for
external callers, so that they don't have to always pass a NULL
argument.
Author: Kevin Grittner
Enabled by recovery_connections = on (default) and forcing archive recovery using a recovery.conf. Recovery processing now emulates the original transactions as they are replayed, providing full locking and MVCC behaviour for read only queries. Recovery must enter consistent state before connections are allowed, so there is a delay, typically short, before connections succeed. Replay of recovering transactions can conflict and in some cases deadlock with queries during recovery; these result in query cancellation after max_standby_delay seconds have expired. Infrastructure changes have minor effects on normal running, though introduce four new types of WAL record.
New test mode "make standbycheck" allows regression tests of static command behaviour on a standby server while in recovery. Typical and extreme dynamic behaviours have been checked via code inspection and manual testing. Few port specific behaviours have been utilised, though primary testing has been on Linux only so far.
This commit is the basic patch. Additional changes will follow in this release to enhance some aspects of behaviour, notably improved handling of conflicts, deadlock detection and query cancellation. Changes to VACUUM FULL are also required.
Simon Riggs, with significant and lengthy review by Heikki Linnakangas, including streamlined redesign of snapshot creation and two-phase commit.
Important contributions from Florian Pflug, Mark Kirkwood, Merlin Moncure, Greg Stark, Gianni Ciolli, Gabriele Bartolini, Hannu Krosing, Robert Haas, Tatsuo Ishii, Hiroyuki Yamada plus support and feedback from many other community members.
be part of multixacts, so allocate a slot for each prepared transaction in
the "oldest member" array in multixact.c. On PREPARE TRANSACTION, transfer
the oldest member value from the current backends slot to the prepared xact
slot. Also save and recover the value from the 2pc state file.
The symptom of the bug was that after a transaction prepared, a shared lock
still held by the prepared transaction was sometimes ignored by other
transactions.
Fix back to 8.1, where both 2PC and multixact were introduced.
archive recovery. Invent a separate state variable and inquiry function
for XLogInsertAllowed() to clarify some tests and make the management of
writing the end-of-recovery checkpoint less klugy. Fix several places
that were incorrectly testing InRecovery when they should be looking at
RecoveryInProgress or XLogInsertAllowed (because they will now be executed
in the bgwriter not startup process). Clarify handling of bad LSNs passed
to XLogFlush during recovery. Use a spinlock for setting/testing
SharedRecoveryInProgress. Improve quite a lot of comments.
Heikki and Tom
be used instead of the normal exclusive lock, and make WAL redo functions
responsible for calling RestoreBkpBlocks(). They know better what kind of a
lock they need.
At the moment, this just moves things around with no functional change, but
makes the hot standby patch that's under review cleaner.
Tom Lane
Bruce Momjian
Heikki Linnakangas
Alvaro Herrera
Peter Eisentraut
Stephen Frost
Robert Haas
Simon Riggs
Magnus Hagander