The fsync code from the backend essentially assumes that somebody's already
validated PGDATA, at least to the extent of it being a readable directory.
That's safe enough for initdb's normal code path too, but "initdb -S"
doesn't have any other processing at all that touches the target directory.
To have reasonable error-case behavior, add a pg_check_dir call.
Per gripe from Peter E.
The argument that this is a sufficiently-expected case to be silently
ignored seems pretty thin. Andres had brought it up back when we were
still considering that most fsync failures should be hard errors, and it
probably would be legit not to fail hard for ETXTBSY --- but the same is
true for EROFS and other cases, which is why we gave up on hard failures.
ETXTBSY is surely not a normal case, so logging the failure seems fine
from here.
Make initdb's version of this logic look as much like the backend's
as possible. This is much less critical than in the backend since not
so many people use "initdb -S", but we want the same corner-case error
handling in both cases.
Back-patch to 9.3 where initdb -S option was introduced. Before that,
initdb only had to deal with freshly-created data directories, wherein
no failures should be expected.
Abhijit Menon-Sen
This eliminates many seconds of test duration and the cause to invoke
"rm -rf", which is typically unavailable on Windows.
Michael Paquier and Noah Misch
Commit c67a86f7da caught most of these,
but this negative test escaped notice. The test did pass, for the wrong
reason, under affected configurations.
Michael Paquier
The "check" target no longer needs to depend on "all", because it now
runs "install" directly, which in turn depends on "all". Doing both
will cause problems with parallel make, because two builds will run next
to each other.
Also remove the redirection of the temp-install output into a log file.
This was appropriate when this was done from within pg_regress, but now
it's just a regular make run, and especially with the above changes this
will now take the place of running the "all" target before the test
suites.
problem report by Jeff Janes, patch in part by Michael Paquier
Some of the TAP tests were supposing that PG programs would accept switches
after non-switch arguments on their command lines. While GNU getopt_long()
does allow that, our own implementation does not, and it's nowhere
suggested in our documentation that such cases should work. Adjust the
tests to use only the documented syntax.
Back-patch to 9.4, since without this the TAP tests fail when run with
src/port's getopt_long() implementation.
Michael Paquier
As with initdb these programs need to run with a restricted token, and
if they don't pg_upgrade will fail when run as a user with Adminstrator
privileges.
Backpatch to all live branches. On the development branch the code is
reorganized so that the restricted token code is now in a single
location. On the stable bramches a less invasive change is made by
simply copying the relevant code to pg_upgrade.c and pg_resetxlog.c.
Patches and bug report from Muhammad Asif Naeem, reviewed by Michael
Paquier, slightly edited by me.
strncpy() has a well-deserved reputation for being unsafe, so make an
effort to get rid of nearly all occurrences in HEAD.
A large fraction of the remaining uses were passing length less than or
equal to the known strlen() of the source, in which case no null-padding
can occur and the behavior is equivalent to memcpy(), though doubtless
slower and certainly harder to reason about. So just use memcpy() in
these cases.
In other cases, use either StrNCpy() or strlcpy() as appropriate (depending
on whether padding to the full length of the destination buffer seems
useful).
I left a few strncpy() calls alone in the src/timezone/ code, to keep it
in sync with upstream (the IANA tzcode distribution). There are also a
few such calls in ecpg that could possibly do with more analysis.
AFAICT, none of these changes are more than cosmetic, except for the four
occurrences in fe-secure-openssl.c, which are in fact buggy: an overlength
source leads to a non-null-terminated destination buffer and ensuing
misbehavior. These don't seem like security issues, first because no stack
clobber is possible and second because if your values of sslcert etc are
coming from untrusted sources then you've got problems way worse than this.
Still, it's undesirable to have unpredictable behavior for overlength
inputs, so back-patch those four changes to all active branches.
Used to say just "could not read password from file "...": Success", which
isn't very informative.
Mats Erik Andersson. Backpatch to all supported versions.
Since this is not something that a user should change,
pg_config_manual.h was an inappropriate place for it.
In initdb.c, remove the use of the macro, because utils/guc.h can't be
included by non-backend code. But we hardcode all the other
configuration file names there, so this isn't a disaster.
Transactions can now set their commit timestamp directly as they commit,
or an external transaction commit timestamp can be fed from an outside
system using the new function TransactionTreeSetCommitTsData(). This
data is crash-safe, and truncated at Xid freeze point, same as pg_clog.
This module is disabled by default because it causes a performance hit,
but can be enabled in postgresql.conf requiring only a server restart.
A new test in src/test/modules is included.
Catalog version bumped due to the new subdirectory within PGDATA and a
couple of new SQL functions.
Authors: Álvaro Herrera and Petr Jelínek
Reviewed to varying degrees by Michael Paquier, Andres Freund, Robert
Haas, Amit Kapila, Fujii Masao, Jaime Casanova, Simon Riggs, Steven
Singer, Peter Eisentraut
630cd14426 added initdb --sync-only, for use by pg_upgrade, by just
exposing the existing fsync code. That's wrong, because initdb so far
had absolutely no reason to deal with tablespaces.
Fix --sync-only by additionally explicitly syncing each of the
tablespaces.
Backpatch to 9.3 where --sync-only was introduced.
Abhijit Menon-Sen and Andres Freund
The old name wasn't very descriptive as of actual contents of the
directory, which are historical snapshots in the snapshots/
subdirectory and mappingdata for rewritten tuples in
mappings/. There's been a fair amount of discussion what would be a
good name. I'm settling for pg_logical because it's likely that
further data around logical decoding and replication will need saving
in the future.
Also add the missing entry for the directory into storage.sgml's list
of PGDATA contents.
Bumps catversion as the data directories won't be compatible.
Historically these database properties could be manipulated only by
manually updating pg_database, which is error-prone and only possible for
superusers. But there seems no good reason not to allow database owners to
set them for their databases, so invent CREATE/ALTER DATABASE options to do
that. Adjust a couple of places that were doing it the hard way to use the
commands instead.
Vik Fearing, reviewed by Pavel Stehule
In yesterday's commit 2dc4f011fd, I tried
to force buffering of stdout/stderr in initdb to be what it is by
default when the program is run interactively on Unix (since that's how
most manual testing is done). This tripped over the fact that Windows
doesn't support _IOLBF mode. We dealt with that a long time ago in
syslogger.c by falling back to unbuffered mode on Windows. Export that
solution in port.h and use it in initdb.
Back-patch to 8.4, like the previous commit.
Since this program may print to either stdout or stderr, the relative
ordering of its messages depends on the buffering behavior of those files.
Force stdout to be line-buffered and stderr to be unbuffered, ensuring
that the behavior will match standard Unix interactive behavior, even
when stdout and stderr are rerouted to a file.
Per complaint from Tomas Vondra. The particular case he pointed out is
new in HEAD, but issues of the same sort could arise in any branch with
other error messages, so back-patch to all branches.
I'm unsure whether we might not want to do this in other client programs
as well. For the moment, just fix initdb.
Historically we've printed a complaint for a bad locale setting, but then
fallen back to the environment default. Per discussion, this is not such
a great idea, because rectifying an erroneous locale choice post-initdb
(perhaps long after data has been loaded) could be enormously expensive.
Better to complain and give the user a chance to double-check things.
The behavior was particularly bad if the bad setting came from environment
variables rather than a bogus command-line switch: in that case not only
was there a fallback to C/SQL_ASCII, but the printed complaint was quite
unhelpful. It's hard to be entirely sure what variables setlocale looked
at, but we can at least give a hint where the problem might be.
Per a complaint from Tomas Vondra.
It's easy to forget using SYSTEMQUOTEs when constructing command strings
for system() or popen(). Even if we fix all the places missing it now, it is
bound to be forgotten again in the future. Introduce wrapper functions that
do the the extra quoting for you, and get rid of SYSTEMQUOTEs in all the
callers.
We previosly used SYSTEMQUOTEs in all the hard-coded command strings, and
this doesn't change the behavior of those. But user-supplied commands, like
archive_command, restore_command, COPY TO/FROM PROGRAM calls, as well as
pgbench's \shell, will now gain an extra pair of quotes. That is desirable,
but if you have existing scripts or config files that include an extra
pair of quotes, those might need to be adjusted.
Reviewed by Amit Kapila and Tom Lane
Some popen() calls were missing SYSTEMQUOTEs, which caused initdb and
pg_upgrade to fail on Windows, if the installation path contained both
spaces and @ signs.
Patch by Nikhil Deshpande. Backpatch to all supported versions.
Commit 7d0f493f19 added infrastructure
to perform tests in assorted src/bin/ subdirectories, but forgot to
teach "make clean" to clean up the detritus the tests leave behind.
According to the Single Unix Spec and assorted man pages, you're supposed
to use the constants named AF_xxx when setting ai_family for a getaddrinfo
call. In a few places we were using PF_xxx instead. Use of PF_xxx
appears to be an ancient BSD convention that was not adopted by later
standardization. On BSD and most later Unixen, it doesn't matter much
because those constants have equivalent values anyway; but nonetheless
this code is not per spec.
In the same vein, replace PF_INET by AF_INET in one socket() call, which
wasn't even consistent with the other socket() call in the same function
let alone the remainder of our code.
Per investigation of a Cygwin trouble report from Marco Atzeri. It's
probably a long shot that this will fix his issue, but it's wrong in
any case.
Clear errno before calling readdir() and handle old MinGW errno bug
while adding full test coverage for readdir/closedir failures.
Backpatch through 8.4.
This feature, building on previous commits, allows the write-ahead log
stream to be decoded into a series of logical changes; that is,
inserts, updates, and deletes and the transactions which contain them.
It is capable of handling decoding even across changes to the schema
of the effected tables. The output format is controlled by a
so-called "output plugin"; an example is included. To make use of
this in a real replication system, the output plugin will need to be
modified to produce output in the format appropriate to that system,
and to perform filtering.
Currently, information can be extracted from the logical decoding
system only via SQL; future commits will add the ability to stream
changes via walsender.
Andres Freund, with review and other contributions from many other
people, including Álvaro Herrera, Abhijit Menon-Sen, Peter Gheogegan,
Kevin Grittner, Robert Haas, Heikki Linnakangas, Fujii Masao, Abhijit
Menon-Sen, Michael Paquier, Simon Riggs, Craig Ringer, and Steve
Singer.
A number of issues were identified by the Coverity scanner and are
addressed in this patch. None of these appear to be security issues
and many are mostly cosmetic changes.
Short comments for each of the changes follows.
Correct the semi-colon placement in be-secure.c regarding SSL retries.
Remove a useless comparison-to-NULL in proc.c (value is dereferenced
prior to this check and therefore can't be NULL).
Add checking of chmod() return values to initdb.
Fix a couple minor memory leaks in initdb.
Fix memory leak in pg_ctl- involves free'ing the config file contents.
Use an int to capture fgetc() return instead of an enum in pg_dump.
Fix minor memory leaks in pg_dump.
(note minor change to convertOperatorReference()'s API)
Check fclose()/remove() return codes in psql.
Check fstat(), find_my_exec() return codes in psql.
Various ECPG memory leak fixes.
Check find_my_exec() return in ECPG.
Explicitly ignore pqFlush return in libpq error-path.
Change PQfnumber() to avoid doing an strdup() when no changes required.
Remove a few useless check-against-NULL's (value deref'd beforehand).
Check rmtree(), malloc() results in pg_regress.
Also check get_alternative_expectfile() return in pg_regress.
Coverity identified a number of places in which it couldn't prove that a
string being copied into a fixed-size buffer would fit. We believe that
most, perhaps all of these are in fact safe, or are copying data that is
coming from a trusted source so that any overrun is not really a security
issue. Nonetheless it seems prudent to forestall any risk by using
strlcpy() and similar functions.
Fixes by Peter Eisentraut and Jozef Mlich based on Coverity reports.
In addition, fix a potential null-pointer-dereference crash in
contrib/chkpass. The crypt(3) function is defined to return NULL on
failure, but chkpass.c didn't check for that before using the result.
The main practical case in which this could be an issue is if libc is
configured to refuse to execute unapproved hashing algorithms (e.g.,
"FIPS mode"). This ideally should've been a separate commit, but
since it touches code adjacent to one of the buffer overrun changes,
I included it in this commit to avoid last-minute merge issues.
This issue was reported by Honza Horak.
Security: CVE-2014-0065 for buffer overruns, CVE-2014-0066 for crypt()
Replication slots are a crash-safe data structure which can be created
on either a master or a standby to prevent premature removal of
write-ahead log segments needed by a standby, as well as (with
hot_standby_feedback=on) pruning of tuples whose removal would cause
replication conflicts. Slots have some advantages over existing
techniques, as explained in the documentation.
In a few places, we refer to the type of replication slots introduced
by this patch as "physical" slots, because forthcoming patches for
logical decoding will also have slots, but with somewhat different
properties.
Andres Freund and Robert Haas
krb5 has been deprecated since 8.3, and the recommended way to do
Kerberos authentication is using the GSSAPI authentication method
(which is still fully supported).
libpq retains the ability to identify krb5 authentication, but only
gives an error message about it being unsupported. Since all authentication
is initiated from the backend, there is no need to keep it at all
in the backend.
Previously, lookups of non-existent user names could return "Success";
it will now return "User does not exist" by resetting errno. This also
centralizes the user name lookup code in libpgport.
Report and analysis by Nicolas Marchildon; patch by me
This prevents the recently-added probe for shm_open() from crashing
on platforms that are impolite enough to deliver a signal rather than
returning ENOSYS for an unimplemented kernel call. At least on the
one known example (HPUX 10.20), ignoring SIGSYS does result in the
desired behavior of getting an ENOSYS error return instead.
Per discussion, we might later wish to do this in the backend as well,
but for now it seems sufficient to do it in initdb.
Continuing 63f32f3416, libpgcommon should
depend on libpgport, but not vice versa. But wait_result_to_str() in
wait_error.c depends on pstrdup() in libpgcommon. So move exec.c and
wait_error.c from libpgport to libpgcommon. Also switch the link order
in the place that's actually used by the failing ecpg builds.
The function declarations have been left in port.h for now. That should
perhaps be separated sometime.
Add asprintf(), pg_asprintf(), and psprintf() to simplify string
allocation and composition. Replacement implementations taken from
NetBSD.
Reviewed-by: Álvaro Herrera <alvherre@2ndquadrant.com>
Reviewed-by: Asif Naeem <anaeem.it@gmail.com>
If POSIX shared memory is supported and works, we prefer it.
Otherwise, we prefer System V, except on Windows, where we use
the implementation specific to that platform.
When creating the symlink for the xlog directory, free the string
which stores the link location. Not really an issue but it doesn't
hurt to be good about this- prior cleanups have fixed similar
issues.
Leak found by the Coverity scanner.
Not back-patching as I don't see it being worth the code churn.
Checksums are set immediately prior to flush out of shared buffers
and checked when pages are read in again. Hint bit setting will
require full page write when block is dirtied, which causes various
infrastructure changes. Extensive comments, docs and README.
WARNING message thrown if checksum fails on non-all zeroes page;
ERROR thrown but can be disabled with ignore_checksum_failure = on.
Feature enabled by an initdb option, since transition from option off
to option on is long and complex and has not yet been implemented.
Default is not to use checksums.
Checksum used is WAL CRC-32 truncated to 16-bits.
Simon Riggs, Jeff Davis, Greg Smith
Wide input and assistance from many community members. Thank you.
We had two copies of this function in the backend and libpq, which was
already pretty bogus, but it turns out that we need it in some other
programs that don't use libpq (such as pg_test_fsync). So put it where
it probably should have been all along. The signal-mask-initialization
support in src/backend/libpq/pqsignal.c stays where it is, though, since
we only need that in the backend.
A materialized view has a rule just like a view and a heap and
other physical properties like a table. The rule is only used to
populate the table, references in queries refer to the
materialized data.
This is a minimal implementation, but should still be useful in
many cases. Currently data is only populated "on demand" by the
CREATE MATERIALIZED VIEW and REFRESH MATERIALIZED VIEW statements.
It is expected that future releases will add incremental updates
with various timings, and that a more refined concept of defining
what is "fresh" data will be developed. At some point it may even
be possible to have queries use a materialized in place of
references to underlying tables, but that requires the other
above-mentioned features to be working first.
Much of the documentation work by Robert Haas.
Review by Noah Misch, Thom Brown, Robert Haas, Marko Tiikkaja
Security review by KaiGai Kohei, with a decision on how best to
implement sepgsql still pending.
We now write one file per database and one global file, instead of
having the whole thing in a single huge file. This reduces the I/O that
must be done when partial data is required -- which is all the time,
because each process only needs information on its own database anyway.
Also, the autovacuum launcher does not need data about tables and
functions in each database; having the global stats for all DBs is
enough.
Catalog version bumped because we have a new subdir under PGDATA.
Author: Tomas Vondra. Some rework by Álvaro
Testing by Jeff Janes
Other discussion by Heikki Linnakangas, Tom Lane.
libpgcommon is a new static library to allow sharing code among the
various frontend programs and backend; this lets us eliminate duplicate
implementations of common routines. We avoid libpgport, because that's
intended as a place for porting issues; per discussion, it seems better
to keep them separate.
The first use case, and the only implemented by this patch, is pg_malloc
and friends, which many frontend programs were already using.
At the same time, we can use this to provide palloc emulation functions
for the frontend; this way, some palloc-using files in the backend can
also be used by the frontend cleanly. To do this, we change palloc() in
the backend to be a function instead of a macro on top of
MemoryContextAlloc(). This was previously believed to cause loss of
performance, but this implementation has been tweaked by Tom and Andres
so that on modern compilers it provides a slight improvement over the
previous one.
This lets us clean up some places that were already with
localized hacks.
Most of the pg_malloc/palloc changes in this patch were authored by
Andres Freund. Zoltán Böszörményi also independently provided a form of
that. libpgcommon infrastructure was authored by Álvaro.
Because the client encoding might not match the server encoding,
pg_upgrade can't allocate NAMEDATALEN bytes for storage of database,
relation, and namespace identifiers. Instead pg_strdup() the memory and
free it.
Also add C comment in initdb.c about safe NAMEDATALEN usage.
storage.
Have pg_upgrade use it, and enable server options fsync=off and
full_page_writes=off.
Document that users turning fsync from off to on should run initdb
--sync-only.
[ Previous commit was incorrectly applied as a git merge. ]
If postmaster changed postmaster.pid while pg_ctl was reading it, pg_ctl
could overrun the buffer it allocated for the file. Fix by reading the
whole file to memory with one read() call.
initdb contains an identical copy of the readfile() function, but the files
that initdb reads are static, not modified concurrently. Nevertheless, add
a simple bounds-check there, if only to silence static analysis tools.
Per report from Dave Vitek. Backpatch to all supported branches.
On some platforms these functions return NULL, rather than the more common
practice of returning a pointer to a zero-sized block of memory. Hack our
various wrapper functions to hide the difference by substituting a size
request of 1. This is probably not so important for the callers, who
should never touch the block anyway if they asked for size 0 --- but it's
important for the wrapper functions themselves, which mistakenly treated
the NULL result as an out-of-memory failure. This broke at least pg_dump
for the case of no user-defined aggregates, as per report from
Matthew Carrington.
Back-patch to 9.2 to fix the pg_dump issue. Given the lack of previous
complaints, it seems likely that there is no live bug in previous releases,
even though some of these functions were in place before that.
We had a number of variants on the theme of "malloc or die", with the
majority named like "pg_malloc", but by no means all. Standardize on the
names pg_malloc, pg_malloc0, pg_realloc, pg_strdup. Get rid of pg_calloc
entirely in favor of using pg_malloc0.
This is an essentially cosmetic change, so no back-patch. (I did find
a couple of places where psql and pg_dump were using plain malloc or
strdup instead of the pg_ versions, but they don't look significant
enough to bother back-patching.)
Replace unix_socket_directory with unix_socket_directories, which is a list
of socket directories, and adjust postmaster's code to allow zero or more
Unix-domain sockets to be created.
This is mostly a straightforward change, but since the Unix sockets ought
to be created after the TCP/IP sockets for safety reasons (better chance
of detecting a port number conflict), AddToDataDirLockFile needs to be
fixed to support out-of-order updates of data directory lockfile lines.
That's a change that had been foreseen to be necessary someday anyway.
Honza Horak, reviewed and revised by Tom Lane
Historically we have not worried about fsync'ing anything during initdb
(in fact, initdb intentionally passes -F to each backend launch to prevent
it from fsync'ing). But with filesystems getting more aggressive about
caching data, that's not such a good plan anymore. Make initdb do a pass
over the finished data directory tree to fsync everything. For testing
purposes, the -N/--nosync flag can be used to restore the old behavior.
Also, testing shows that on Linux, sync_file_range() is much faster than
posix_fadvise() for hinting to the kernel that an fsync is coming,
apparently because the latter blocks on a rather small request queue while
the former doesn't. So use this function if available in initdb, and also
in the backend's pg_flush_data() (where it currently will affect only the
speed of CREATE DATABASE's cloning step).
We will later make pg_regress invoke initdb with the --nosync flag
to avoid slowing down cases such as "make check" in contrib. But
let's not do so until we've shaken out any portability issues in this
patch.
Jeff Davis, reviewed by Andres Freund
Tom Lane
Peter Eisentraut
Bruce Momjian
Noah Misch
Andrew Dunstan
Heikki Linnakangas
Alvaro Herrera
Andres Freund
Robert Haas
Stephen Frost
Fujii Masao
Magnus Hagander
Tatsuo Ishii
Simon Riggs
Kevin Grittner