Two attributes related to checkpointer statistics are removed in this
commit:
- buffers_backend, that counts the number of buffers written directly by
a backend.
- buffers_backend_fsync, that counts the number of times a backend had
to do fsync() by its own.
These are actually not checkpointer properties but backend properties.
Also, pg_stat_io provides a more accurate and equivalent report of these
numbers, by tracking all the I/O stats related to backends, including
writes and fsyncs, so storing them in pg_stat_checkpointer was
redundant.
Thanks also to Robert Haas and Amit Kapila for their input.
Bump catalog version.
Author: Bharath Rupireddy
Reviewed-by: Bertrand Drouvot, Andres Freund
Discussion: https://postgr.es/m/20230210004604.mcszbscsqs3bc5nx@awork3.anarazel.de
While reading information from the old cluster, a list of logical
slots is fetched. At the later part of upgrading, pg_upgrade revisits the
list and restores slots by executing pg_create_logical_replication_slot()
on the new cluster. Migration of logical replication slots is only
supported when the old cluster is version 17.0 or later.
If the old node has invalid slots or slots with unconsumed WAL records,
the pg_upgrade fails. These checks are needed to prevent data loss.
The significant advantage of this commit is that it makes it easy to
continue logical replication even after upgrading the publisher node.
Previously, pg_upgrade allowed copying publications to a new node. With
this patch, adjusting the connection string to the new publisher will
cause the apply worker on the subscriber to connect to the new publisher
automatically. This enables seamless continuation of logical replication,
even after an upgrade.
Author: Hayato Kuroda, Hou Zhijie
Reviewed-by: Peter Smith, Bharath Rupireddy, Dilip Kumar, Vignesh C, Shlok Kyal
Discussion: http://postgr.es/m/TYAPR01MB58664C81887B3AF2EB6B16E3F5939@TYAPR01MB5866.jpnprd01.prod.outlook.com
Discussion: http://postgr.es/m/CAA4eK1+t7xYcfa0rEQw839=b2MzsfvYDPz3xbD+ZqOdP3zpKYg@mail.gmail.com
As far as I can see, ecpg has no notion of a "default" open
connection. You can do "CONNECT TO DEFAULT" but that just specifies
letting libpq use all its default connection parameters --- the
resulting connection is not special subsequently. In particular,
SET CONNECTION = DEFAULT and DISCONNECT DEFAULT simply act on a
connection named DEFAULT, if you've made one; they do not have
special lookup rules. But the documentation of these commands
makes it look like they do.
Simplest fix, I think, is just to remove the paras suggesting that
DEFAULT is special here.
Also, SET CONNECTION *does* have one special lookup rule, which
is that it recognizes CURRENT as an alias for the currently selected
connection. SET CONNECTION = CURRENT is a no-op, so it's pretty
useless, but nonetheless it does something different from selecting
a connection by name; so we'd better document it.
Per report from Sylvain Frandaz. Back-patch to all supported
versions.
Discussion: https://postgr.es/m/169824721149.1769274.1553568436817652238@wrigleys.postgresql.org
The Self Join Elimination (SJE) feature removes an inner join of a plain table
to itself in the query tree if is proved that the join can be replaced with
a scan without impacting the query result. Self join and inner relation are
replaced with the outer in query, equivalence classes, and planner info
structures. Also, inner restrictlist moves to the outer one with removing
duplicated clauses. Thus, this optimization reduces the length of the range
table list (this especially makes sense for partitioned relations), reduces
the number of restriction clauses === selectivity estimations, and potentially
can improve total planner prediction for the query.
The SJE proof is based on innerrel_is_unique machinery.
We can remove a self-join when for each outer row:
1. At most one inner row matches the join clause.
2. Each matched inner row must be (physically) the same row as the outer one.
In this patch we use the next approach to identify a self-join:
1. Collect all merge-joinable join quals which look like a.x = b.x
2. Add to the list above the baseretrictinfo of the inner table.
3. Check innerrel_is_unique() for the qual list. If it returns false, skip
this pair of joining tables.
4. Check uniqueness, proved by the baserestrictinfo clauses. To prove
the possibility of self-join elimination inner and outer clauses must have
an exact match.
The relation replacement procedure is not trivial and it is partly combined
with the one, used to remove useless left joins. Tests, covering this feature,
were added to join.sql. Some regression tests changed due to self-join removal
logic.
Discussion: https://postgr.es/m/flat/64486b0b-0404-e39e-322d-0801154901f3%40postgrespro.ru
Author: Andrey Lepikhov, Alexander Kuzmenkov
Reviewed-by: Tom Lane, Robert Haas, Andres Freund, Simon Riggs, Jonathan S. Katz
Reviewed-by: David Rowley, Thomas Munro, Konstantin Knizhnik, Heikki Linnakangas
Reviewed-by: Hywel Carver, Laurenz Albe, Ronan Dunklau, vignesh C, Zhihong Yu
Reviewed-by: Greg Stark, Jaime Casanova, Michał Kłeczek, Alena Rybakina
Reviewed-by: Alexander Korotkov
Rather than using the generic word "space" we might as well use "memory"
since that's precisely what we're dealing with here.
This was extracted from a larger patch around terminology changes where
the remaining hunks were rejected.
Author: Gurjeet Singh <gurjeet@singh.im>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CABwTF4UHO_NtcsOL6_XZfnpKg_0XBFKa7B-7_x5zs3MRZm3-Tg@mail.gmail.com
Clearly spell out the limitations of aminsert()'s indexUnchanged hinting
mechanism in the index AM documentation.
Oversight in commit 9dc718bd, which added the "logically unchanged
index" hint (which is used to trigger bottom-up index deletion).
Author: Peter Geoghegan <pg@bowt.ie>
Reported-By: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-By: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAH2-WzmU_BQ=-H9L+bxTSMQBqHMjp1DSwGypvL0gKs+dTOfkKg@mail.gmail.com
Backpatch: 14-, where indexUnchanged hinting was introduced.
This doco said that use of => as an operator "is deprecated".
It's been fully disallowed since 865f14a2d back in 9.5, but
evidently that commit missed updating this statement.
Do so now.
Allow the COMMUTATOR, NEGATOR, MERGES, and HASHES attributes to be set
by ALTER OPERATOR. However, we don't allow COMMUTATOR/NEGATOR to be
changed once set, nor allow the MERGES/HASHES flags to be unset once
set. Changes like that might invalidate plans already made, and
dealing with the consequences seems like more trouble than it's worth.
The main use-case we foresee for this is to allow addition of missed
properties in extension update scripts, such as extending an existing
operator to support hashing. So only transitions from not-set to set
states seem very useful.
This patch also causes us to reject some incorrect cases that formerly
resulted in inconsistent catalog state, such as trying to set the
commutator of an operator to be some other operator that already has a
(different) commutator.
While at it, move the InvokeObjectPostCreateHook call for CREATE
OPERATOR to not occur until after we've fixed up commutator or negator
links as needed. The previous ordering could only be justified by
thinking of the OperatorUpd call as a kind of ALTER OPERATOR step;
but we don't call InvokeObjectPostAlterHook therein. It seems better
to let the hook see the final state of the operator object.
In the documentation, move the discussion of how to establish
commutator pairs from xoper.sgml to the CREATE OPERATOR ref page.
Tommy Pavlicek, reviewed and editorialized a bit by me
Discussion: https://postgr.es/m/CAEhP-W-vGVzf4udhR5M8Bdv88UYnPrhoSkj3ieR3QNrsGQoqdg@mail.gmail.com
This commit adds to pg_stat_statements the two new fields for local
buffers introduced by 295c36c0c1, adding the time spent to read and
write these blocks. These are similar to what is done for temp and
shared blocks. This information available only if track_io_timing is
enabled.
Like for 5a3423ad8e, no version bump is required in the module.
Author: Nazir Bilal Yavuz
Reviewed-by: Robert Haas, Melanie Plageman
Discussion: https://postgr.es/m/CAN55FZ19Ss279mZuqGbuUNxka0iPbLgYuOQXqAKewrjNrp27VA@mail.gmail.com
There was no I/O timing statistics for counting read and write timings
on local blocks, contrary to the counterparts for temp and shared
blocks. This information is available when track_io_timing is enabled.
The output of EXPLAIN is updated to show this information. An update of
pg_stat_statements is planned next.
Author: Nazir Bilal Yavuz
Reviewed-by: Robert Haas, Melanie Plageman
Discussion: https://postgr.es/m/CAN55FZ19Ss279mZuqGbuUNxka0iPbLgYuOQXqAKewrjNrp27VA@mail.gmail.com
These two counters, defined in BufferUsage to track respectively the
time spent while reading and writing blocks have historically only
tracked data related to shared buffers, when track_io_timing is enabled.
An upcoming patch to add specific counters for local buffers will take
advantage of this rename as it has come up that no data is currently
tracked for local buffers, and tracking local and shared buffers using
the same fields would be inconsistent with the treatment done for temp
buffers. Renaming the existing fields clarifies what the block type of
each stats field is.
pg_stat_statement is updated to reflect the rename. No extension
version bump is required as 5a3423ad8e has done one, affecting v17~.
Author: Nazir Bilal Yavuz
Reviewed-by: Robert Haas, Melanie Plageman
Discussion: https://postgr.es/m/CAN55FZ19Ss279mZuqGbuUNxka0iPbLgYuOQXqAKewrjNrp27VA@mail.gmail.com
Since its introduction, LogLogicalMessage() (via the SQL interface
pg_logical_emit_message()) has never included a call to XLogFlush(),
causing it to potentially lose messages on a crash when used in
non-transactional mode. This has come up to me as a problem while
playing with ideas to design a test suite for what has become
039_end_of_wal.pl introduced in bae868caf2 by Thomas Munro, because
there are no direct ways to force a WAL flush via SQL.
The default is false, to not flush messages and influence existing
use-cases where this function could be used. If set to true, the
message emitted is flushed before returning back to the caller, making
the message durable on crash. This new option has no effect when using
pg_logical_emit_message() in transactional mode, as the record's flush
is guaranteed by the WAL record generated by the transaction committed.
Two queries of test_decoding are tweaked to cover the new code path for
the flush.
Bump catalog version.
Author: Michael Paquier
Reviewed-by: Andres Freund, Amit Kapila, Fujii Masao, Tung Nguyen, Tomas
Vondra
Discussion: https://postgr.es/m/ZNsdThSe2qgsfs7R@paquier.xyz
First, we shouldn't recommend switching to single-user mode, because
that's terrible advice. Especially on newer versions where VACUUM
will enter emergency mode when nearing (M)XID exhaustion, it's
perfectly fine to just VACUUM in multi-user mode. Doing it that way
is less disruptive and avoids disabling the safeguards that prevent
actual wraparound, so recommend that instead.
Second, be more precise about what is going to happen (when we're
nearing the limits) or what is happening (when we actually hit them).
The database doesn't shut down, nor does it refuse all commands. It
refuses commands that assign whichever of XIDs and MXIDs are nearly
exhausted.
No back-patch. The existing hint that advises going to single-user
mode is sufficiently awful advice that removing it or changing it
might be justifiable even though we normally avoid changing
user-facing messages in back-branches, but I (rhaas) felt that it
was better to be more conservative and limit this fix to master
only. Aside from the usual risk of breaking translations, people
might be used to the existing message, or even have monitoring
scripts that look for it.
Alexander Alekseev, John Naylor, Robert Haas, reviewed at various
times by Peter Geoghegan, Hannu Krosing, and Andres Freund.
Discussion: http://postgr.es/m/CA+TgmoZBg95FiR9wVQPAXpGPRkacSt2okVge+PKPPFppN7sfnQ@mail.gmail.com
The old documentation encourages entering single-user mode for no
reason, which is a bad plan in most cases. Instead, discourage users
from doing that, and explain the limited cases in which it may be
desirable.
The old documentation claims that running VACUUM as anyone but the
superuser can't possibly work, which is not really true, because it
might be that some other user has enough permissions to VACUUM all
the tables that matter. Weaken the language just a bit.
The old documentation claims that you can't run any commands
when near XID exhaustion, which is false because you can still
run commands that don't require an XID, like a SELECT without a
locking clause.
The old documentation doesn't clearly explain that it's a good idea
to get rid of prepared transactons, long-running transactions, and
replication slots that are preventing (M)XID horizon advancement.
Spell out the steps to do that.
Also, discourage the use of VACUUM FULL and VACUUM FREEZE in
this type of scenario.
Back-patch to v14. Much of this is good advice on all supported
versions, but before 60f1f09ff4
the chances of VACUUM failing in multi-user mode were much higher.
Alexander Alekseev, John Naylor, Robert Haas, reviewed at various
times by Peter Geoghegan, Hannu Krosing, and Andres Freund.
Discussion: http://postgr.es/m/CA+TgmoYtsUDrzaHcmjFhLzTk1VEv29mO_u-MT+XWHrBJ_4nD8A@mail.gmail.com
This commit introduces trigger on login event, allowing to fire some actions
right on the user connection. This can be useful for logging or connection
check purposes as well as for some personalization of environment. Usage
details are described in the documentation included, but shortly usage is
the same as for other triggers: create function returning event_trigger and
then create event trigger on login event.
In order to prevent the connection time overhead when there are no triggers
the commit introduces pg_database.dathasloginevt flag, which indicates database
has active login triggers. This flag is set by CREATE/ALTER EVENT TRIGGER
command, and unset at connection time when no active triggers found.
Author: Konstantin Knizhnik, Mikhail Gribkov
Discussion: https://postgr.es/m/0d46d29f-4558-3af9-9c85-7774e14a7709%40postgrespro.ru
Reviewed-by: Pavel Stehule, Takayuki Tsunakawa, Greg Nancarrow, Ivan Panchenko
Reviewed-by: Daniel Gustafsson, Teodor Sigaev, Robert Haas, Andres Freund
Reviewed-by: Tom Lane, Andrey Sokolov, Zhihong Yu, Sergey Shinderuk
Reviewed-by: Gregory Stark, Nikita Malakhov, Ted Yu
When converting a timestamp to/from with/without time zone, the SQL
Standard specifies an AT LOCAL variant of AT TIME ZONE which uses the
session's time zone. This includes three system functions able to do
the work in the same way as the existing flavors for AT TIME ZONE,
except that these need to be marked as stable as they depend on the
session's TimeZone GUC.
Bump catalog version.
Author: Vik Fearing
Reviewed-by: Laurenz Albe, Cary Huang, Michael Paquier
Discussion: https://postgr.es/m/8e25dec4-5667-c1a5-6581-167d710c2182@postgresfriends.org
timezone(zone, timestamp) is already mentioned as an equivalent of the
two first patterns in the table describing the AT TIME ZONE variants,
but did not mention the third case about "time" and its equivalent as an
SQL function, so let's be consistent here.
Extracted from a larger patch by the same author.
Author: Vik Fearing
Discussion: https://postgr.es/m/8e25dec4-5667-c1a5-6581-167d710c2182@postgresfriends.org
This adds a new option called BGWORKER_BYPASS_ROLELOGINCHECK to the
flags available to BackgroundWorkerInitializeConnection() and
BackgroundWorkerInitializeConnectionByOid().
This gives the possibility to bgworkers to bypass the role login check,
making possible the use of a role that has no login rights while not
being a superuser. PostgresInit() gains a new flag called
INIT_PG_OVERRIDE_ROLE_LOGIN, taking advantage of the refactoring done in
4800a5dfb4.
Regression tests are added to worker_spi to check the behavior of this
new option with bgworkers.
Author: Bertrand Drouvot
Reviewed-by: Nathan Bossart, Michael Paquier, Bharath Rupireddy
Discussion: https://postgr.es/m/bcc36259-7850-4882-97ef-d6b905d2fc51@gmail.com
While these two built-in functions do exactly the same thing,
CURRENT_USER seems preferable to use in documentation examples.
It's easier to look up if the reader is unsure what it is.
Also, this puts these examples in sync with an adjacent example
that already used CURRENT_USER.
Per question from Kirk Parker.
Discussion: https://postgr.es/m/CANwZ8rmN_Eb0h0hoMRS8Feftaik0z89PxVsKg+cP+PctuOq=Qg@mail.gmail.com
Two custom wait events are added here:
- "DblinkConnect", when waiting to establish a connection to a remote
server.
- "DblinkGetConnect", when waiting to establish a connection to a remote
server but it could not be found in the list of already-opened ones.
Author: Masahiro Ikeda
Discussion: https://postgr.es/m/197bce267fa691a0ac62c86c4ab904c4@oss.nttdata.com
Three custom wait events are added here:
- "PostgresFdwCleanupResult", waiting while cleaning up PQgetResult() on
transaction abort.
- "PostgresFdwConnect", waiting to establish a connection to a remote
server.
- "PostgresFdwGetResult", waiting to receive a result from a remote
server.
Author: Masahiro Ikeda
Discussion: https://postgr.es/m/197bce267fa691a0ac62c86c4ab904c4@oss.nttdata.com
This naming is more consistent with all the other user-facing wait event
strings. Other in-core modules will use the same naming convention, so
let's be consistent here as well.
Extracted from a larger patch by the same author.
Author: Masahiro Ikeda
Discussion: https://postgr.es/m/197bce267fa691a0ac62c86c4ab904c4@oss.nttdata.com
Allow a line break in example output, as we have done elsewhere.
Overlength output was added in commit 1e68e43d3.
While here, adjust some shaky grammar in an adjacent note
(from a different commit, c9af05465).
Per buildfarm.
These options already exist, but you need to specify a column list for
them, which can be cumbersome. We already have the possibility of all
columns for FORCE QUOTE, so this is simply extending that facility to
FORCE_NULL and FORCE_NOT_NULL.
Author: Zhang Mingli
Reviewed-By: Richard Guo, Kyatoro Horiguchi, Michael Paquier.
Discussion: https://postgr.es/m/CACJufxEnVqzOFtqhexF2+AwOKFrV8zHOY3y=p+gPK6eB14pn_w@mail.gmail.com
Commit 7d3b7011b added a link to the statistics functions, which at the
time were anchored under the section for statistics views. aebe989477
added a separate section for statistics functions, but the link was not
updated to point to the new anchor. Fix by changing the xref.
Backpatch to all supported branches.
Author: Peter Smith <peter.b.smith@fujitsu.com>
Discussion: https://postgr.es/m/CAHut+Ptr0jKzNNtWnssLq+3jNhbyaBseqf6NPrWHk08mQFRoTg@mail.gmail.com
Backpatch-through: 11
For a reader unfamiliar with the postgres code it might take some
grepping to find where elevels are defined. This adds a reference
to elog.h in the text like how SQLSTATE errorcodes are referenced
to errcodes.h on the same page.
Author: Kuwamura Masaki <kuwamura@db.is.i.nagoya-u.ac.jp>
Discussion: https://postgr.es/m/CAMyC8qqp1UDA9zothnJ9CbUYByytwpALS3LkdZ6bs1w5kZw5Xg@mail.gmail.com
