We've spent an awful lot of effort over the years in coping with
platform-specific vagaries of the *printf family of functions. Let's just
forget all that mess and standardize on always using src/port/snprintf.c.
This gets rid of a lot of configure logic, and it will allow a saner
approach to dealing with %m (though actually changing that is left for
a follow-on patch).
Preliminary performance testing suggests that as it stands, snprintf.c is
faster than the native printf functions for some tasks on some platforms,
and slower for other cases. A pending patch will improve that, though
cases with floating-point conversions will doubtless remain slower unless
we want to put a *lot* of effort into that. Still, we've not observed
that *printf is really a performance bottleneck for most workloads, so
I doubt this matters much.
Patch by me, reviewed by Michael Paquier
Discussion: https://postgr.es/m/2975.1526862605@sss.pgh.pa.us
Since commit e1d19c902, buildfarm member gharial has been failing with
symptoms indicating that snprintf sometimes returns -1 for buffer
overrun, even though it passes the added configure check. Some
google research suggests that this happens only in limited cases,
such as when the overrun happens partway through a %d item. Adjust
the configure check to exercise it that way. Since I'm now feeling
more paranoid than I was before, also make the test explicitly verify
that the buffer doesn't get physically overrun.
Since our substitute snprintf now returns a C99-compliant result,
there's no need anymore to have complicated code to cope with pre-C99
behavior. We can just make configure substitute snprintf.c if it finds
that the system snprintf() is pre-C99. (Note: I do not believe that
there are any platforms where this test will trigger that weren't
already being rejected due to our other C99-ish feature requirements for
snprintf. But let's add the check for paranoia's sake.) Then, simplify
the call sites that had logic to cope with the pre-C99 definition.
I also dropped some stuff that was being paranoid about the possibility
of snprintf overrunning the given buffer. The only reports we've ever
heard of that being a problem were for Solaris 7, which is long dead,
and we've sure not heard any reports of these assertions triggering in
a long time. So let's drop that complexity too.
Likewise, drop some code that wasn't trusting snprintf to set errno
when it returns -1. That would be not-per-spec, and again there's
no real reason to believe it is a live issue, especially not for
snprintfs that pass all of configure's feature checks.
Discussion: https://postgr.es/m/17245.1534289329@sss.pgh.pa.us
We used to claim to support platforms using 'q' or 'I64' as the printf
length modifier for long long int, by dint of replacing snprintf with
our own code which uses the C99 standard 'll' modifier. But that is
only adequate if we use INT64_MODIFIER only in snprintf-based calls,
not directly with the platform's native printf or fprintf. Which
hasn't been the case for years. We had not noticed, partially because
of inadequate test coverage, and partially because the buildfarm is
almost completely bare of machines that won't take 'll'. The last
one seems to have been frogmouth, which was adjusted recently so that
it will take 'll'. We might as well just give up on the pretense
that anything else works, and save ourselves some configure cycles.
Discussion: https://postgr.es/m/13103.1526749980@sss.pgh.pa.us
Discussion: https://postgr.es/m/24769.1526772680@sss.pgh.pa.us
We had some AC_CHECK_HEADER tests that were really wastes of cycles,
because the code proceeded to #include those headers unconditionally
anyway, in all or a large majority of cases. The lack of complaints
shows that those headers are available on every platform of interest,
so we might as well let configure run a bit faster by not probing
those headers at all.
I suspect that some of the tests I left alone are equally useless, but
since all the existing #includes of the remaining headers are properly
guarded, I didn't touch them.
Using exit() requires stdlib.h, which is not included. Use return
instead. Also add return type for main().
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Thomas Munro <thomas.munro@enterprisedb.com>
We weren't terribly consistent about whether to call Apple's OS "OS X"
or "Mac OS X", and the former is probably confusing to people who aren't
Apple users. Now that Apple has rebranded it "macOS", follow their lead
to establish a consistent naming pattern. Also, avoid the use of the
ancient project name "Darwin", except as the port code name which does not
seem desirable to change. (In short, this patch touches documentation and
comments, but no actual code.)
I didn't touch contrib/start-scripts/osx/, either. I suspect those are
obsolete and due for a rewrite, anyway.
I dithered about whether to apply this edit to old release notes, but
those were responsible for quite a lot of the inconsistencies, so I ended
up changing them too. Anyway, Apple's being ahistorical about this,
so why shouldn't we be?
Previously, we included <xlocale.h> only if necessary to get the definition
of type locale_t. According to notes in PGAC_TYPE_LOCALE_T, this is
important because on some versions of glibc that file supplies an
incompatible declaration of locale_t. (This info may be obsolete, because
on my RHEL6 box that seems to be the *only* definition of locale_t; but
there may still be glibc's in the wild for which it's a live concern.)
It turns out though that on FreeBSD and maybe other BSDen, you can get
locale_t from stdlib.h or locale.h but mbstowcs_l() and friends only from
<xlocale.h>. This was leaving us compiling calls to mbstowcs_l() and
friends with no visible prototype, which causes a warning and could
possibly cause actual trouble, since it's not declared to return int.
Hence, adjust the configure checks so that we'll include <xlocale.h>
either if it's necessary to get type locale_t or if it's necessary to
get a declaration of mbstowcs_l().
Report and patch by Aleksander Alekseev, somewhat whacked around by me.
Back-patch to all supported branches, since we have been using
mbstowcs_l() since 9.1.
Remove configure's checks for HAVE_POSIX_SIGNALS, HAVE_SIGPROCMASK, and
HAVE_SIGSETJMP. These APIs are required by the Single Unix Spec v2
(POSIX 1997), which we generally consider to define our minimum required
set of Unix APIs. Moreover, no buildfarm member has reported not having
them since 2012 or before, which means that even if the code is still live
somewhere, it's untested --- and we've made plenty of signal-handling
changes of late. So just take these APIs as given and save the cycles for
configure probes for them.
However, we can't remove as much C code as I'd hoped, because the Windows
port evidently still uses the non-POSIX code paths for signal masking.
Since we're largely emulating these BSD-style APIs for Windows anyway, it
might be a good thing to switch over to POSIX-like notation and thereby
remove a few more #ifdefs. But I'm not in a position to code or test that.
In the meantime, we can at least make things a bit more transparent by
testing for WIN32 explicitly in these places.
AC_TRY_COMPILE(...) -> AC_COMPILE_IFELSE([AC_LANG_PROGRAM(...)])
AC_TRY_LINK(...) -> AC_LINK_IFELSE([AC_LANG_PROGRAM(...)])
AC_TRY_RUN(...) -> AC_RUN_IFELSE([AC_LANG_PROGRAM(...)])
AC_LANG_SAVE/RESTORE -> AC_LANG_PUSH/POP
AC_DECL_SYS_SIGLIST -> AC_CHECK_DECLS(...) (per snippet in autoconf manual)
Also use AC_LANG_SOURCE instead of AC_LANG_PROGRAM, where the main()
function is not needed.
With these changes, autoconf -Wall doesn't complain anymore.
Andreas Karlsson
We had code that supposed that some platforms might offer a nonstandard
version of getpwuid_r() with only four arguments. However, the 5-argument
definition has been standardized at least since the Single Unix Spec v2,
which is our normal reference for what's portable across all Unix-oid
platforms. (What's more, this wasn't the only pre-standardization version
of getpwuid_r(); my old HPUX 10.20 box has still another signature.)
So let's just get rid of the now-useless configure step.
The PGAC_FUNC_SNPRINTF_SIZE_T_SUPPORT test was broken by
ce486056ec. Among others it made the UINT64_FORMAT macro to be
defined in c.h, instead of directly being defined by configure.
This lead to the replacement printf being used on all platforms for a
while. Which seems to work, because this was only used due to
different profiles ;)
Fix by relying on INT64_MODIFIER instead.
We have had INT64_FORMAT and UINT64_FORMAT for a long time, but that's not
good enough if you want something more exotic, like "%20lld".
Abhijit Menon-Sen, per Andres Freund's suggestion.
Since C99, it's been standard for printf and friends to accept a "z" size
modifier, meaning "whatever size size_t has". Up to now we've generally
dealt with printing size_t values by explicitly casting them to unsigned
long and using the "l" modifier; but this is really the wrong thing on
platforms where pointers are wider than longs (such as Win64). So let's
start using "z" instead. To ensure we can do that on all platforms, teach
src/port/snprintf.c to understand "z", and add a configure test to force
use of that implementation when the platform's version doesn't handle "z".
Having done that, modify a bunch of places that were using the
unsigned-long hack to use "z" instead. This patch doesn't pretend to have
gotten everyplace that could benefit, but it catches many of them. I made
an effort in particular to ensure that all uses of the same error message
text were updated together, so as not to increase the number of
translatable strings.
It's possible that this change will result in format-string warnings from
pre-C99 compilers. We might have to reconsider if there are any popular
compilers that will warn about this; but let's start by seeing what the
buildfarm thinks.
Andres Freund, with a little additional work by me
This is just neatnik-ism, since all the tests in the code are #ifdefs,
but we shouldn't specify symbols as "Define to 1 ..." and then not
actually define them that way.
The BSD-ish members of the buildfarm all seem to think removing this
was a bad idea. It looks to me like it resulted in omitting the system
header inclusion necessary to detect the fields of struct tm correctly.
ENABLE_DTRACE unused as of a7b7b07af3
HAVE_ERR_SET_MARK unused as of 4ed4b6c54e
HAVE_FCVT unused as of 4553e1d80f
HAVE_STRUCT_SOCKADDR_UN unused as of b4cea00a1f
HAVE_SYSCONF unused as of f83356c7f5
TM_IN_SYS_TIME never used, obsolescent per Autoconf documentation
This adds collation support for columns and domains, a COLLATE clause
to override it per expression, and B-tree index support.
Peter Eisentraut
reviewed by Pavel Stehule, Itagaki Takahiro, Robert Haas, Noah Misch
This upgrades the configure infrastructure to the latest Autoconf version.
Some notable news are:
- The workaround for the broken fseeko() test is gone.
- Checking for unknown options is now provided by Autoconf itself.
- Fixes for Mac OS X
+ # Determine if printf supports %1$ argument selection, e.g. %5$ selects
+ # the fifth argument after the printf print string.
+ # This is not in the C99 standard, but in the Single Unix Specification (SUS).
+ # It is used in our langauge translation strings.
Nicolai Tufar with configure changes by Bruce.
was modified for IPv6. Use a robust definition of struct sockaddr_storage,
do a proper configure test to see if ss_len exists, don't assume that
getnameinfo() will handle AF_UNIX sockets, don't trust getaddrinfo to
return the protocol we ask for, etc. This incorporates several outstanding
patches from Kurt Roeckx, but I'm to blame for anything that doesn't
work ...
independently of whether the struct tm tm_zone member exists.
Also run autoheader, which seems not to have been done lately;
it added about three more things to pg_config.h.in than I was expecting...
separate macro. Also add support for %I64d which is the way on Windows.
The code that checks for the 64-bit int type now gives more reasonable
results when cross-compiling: In that case we just take the compiler's
information and trust that the arithmetic works. Disabling int64 is too
pessimistic.
eliminates a raft of portability issues, including whether sys_nerr
exists, whether the platform has any valid negative errnos, etc. The
downside is minimal: errno shouldn't ever contain an invalid value anyway,
and if it does, reasonably modern versions of strerror will not choke.
This rangecheck idea seemed good at the time, but it's clearly a net loss,
and I apologize to all concerned for having ever put it in.
Tom Lane
Bruce Momjian
Peter Eisentraut
Heikki Linnakangas
Andres Freund
Magnus Hagander
PostgreSQL Daemon