Included patches fix a portability problem of unsetenv() used in
6.4.2 multi-byte support. unsetenv() is only avaliable on FreeBSD and
Linux so I decided to replace with putenv().
Here are patches needed to complie under AIX 4.2.
I changed configure.in, pqcomm.c, config.h.in, and fe-connect.c.
Also I had to install flex because lex did not want to translate pgc.l.
structs from libpq-fe.h, as we previously discussed.
There turned out to be sloppy coding practices in more places than
I had realized :-(, but all in all I think it was a well-worth-while
exercise.
I ended up adding several routines to libpq's API in order to respond
to application requirements that were exposed by this work. I owe the
docs crew updates for libpq.sgml to describe these changes. I'm way too
tired to work on the docs tonight, however.
This is the last major change I intend to submit for 6.4. I do want
to see if I can make libpgtcl work with Tcl 8.0 before we go final,
but hopefully that will be a minor bug fix.
From: Tom Lane <tgl@sss.pgh.pa.us>
Attached is a patch for this weekend's work on libpq. I've dealt
with several issues:
<for details: see message, in pgsql-patches archive for above data>
couple weeks ago on the hackers and interfaces lists:
1. When the backend sends a NOTICE message and closes the connection
(typically, because it was told to by the postmaster after
another backend coredumped), libpq will now print the notice
and close the connection cleanly. Formerly, the frontend app
would usually terminate ungracefully due to a SIGPIPE. (I am
not sure if 6.3.2 behaved that way, but the current cvs sources
do...)
2. libpq's various printouts to stderr are now fed through a single
"notice processor" routine, which can be overridden by the
application to direct notices someplace else. This should ease
porting libpq to Windows.
I also noticed and fixed a problem in PQprint: when sending output
to a pager subprocess, it would disable SIGPIPE in case the pager
terminates early (this is good) --- but afterwards it reset SIGPIPE
to SIG_DFL, rather than restoring the application's prior setting
(bad).
regards, tom lane
As Bruce mentioned, this is due to the conflict among changes we made.
Included patches should fix the problem(I changed all MB to
MULTIBYTE). Please let me know if you have further problem.
P.S. I did not include pathces to configure and gram.c to save the
file size(configure.in and gram.y modified).
From: t-ishii@sra.co.jp
Attached are patches to enhance the multi-byte support. (patches are
against 7/18 snapshot)
* determine encoding at initdb/createdb rather than compile time
Now initdb/createdb has an option to specify the encoding. Also, I
modified the syntax of CREATE DATABASE to accept encoding option. See
README.mb for more details.
For this purpose I have added new column "encoding" to pg_database.
Also pg_attribute and pg_class are changed to catch up the
modification to pg_database. Actually I haved added pg_database_mb.h,
pg_attribute_mb.h and pg_class_mb.h. These are used only when MB is
enabled. The reason having separate files is I couldn't find a way to
use ifdef or whatever in those files. I have to admit it looks
ugly. No way.
* support for PGCLIENTENCODING when issuing COPY command
commands/copy.c modified.
* support for SQL92 syntax "SET NAMES"
See gram.y.
* support for LATIN2-5
* add UNICODE regression test case
* new test suite for MB
New directory test/mb added.
* clean up source files
Basic idea is to have MB's own subdirectory for easier maintenance.
These are include/mb and backend/utils/mb.
The attached patches respond to discussion that was on pgsql-hackers
around the beginning of June (see thread "libpgtcl bug (and symptomatic
treatment)"). The changes are:
1. Remove code in connectDB that throws away the password after making
a connection. This doesn't really add much security IMHO --- a bad guy
with access to your client's address space can likely extract the
password anyway, to say nothing of what he might do directly. And
there's the serious shortcoming that it prevents PQreset() from working
if the database requires a password.
2. Fix coredump problem: fe_sendauth did not guard against being handed
a NULL password pointer. (This is the proximate cause of the coredump-
during-PQreset problem that Magosanyi Arpad complained of last month.)
3. Remove highly questionable "error recovery" logic in libpgtcl's
pg_exec statement.
I believe the consensus of the discussion last month was in favor of
#1 and #3, but I'm just now getting around to making the change.
I realized that #2 was a bug in process of looking at the change.
Making PQrequestCancel safe to call in a signal handler turned out to be
much easier than I feared. So here are the diffs.
Some notes:
* I modified the postmaster's packet "iodone" callback interface to allow
the callback routine to return a continue-or-drop-connection return
code; this was necessary to allow the connection to be closed after
receiving a Cancel, rather than proceeding to launch a new backend...
Being a neatnik, I also made the iodone proc have a typechecked
parameter list.
* I deleted all code I could find that had to do with OOB.
* I made some edits to ensure that all signals mentioned in the code
are referred to symbolically not by numbers ("SIGUSR2" not "2").
I think Bruce may have already done at least some of the same edits;
I hope that merging these patches is not too painful.
Through some minor changes, I have been able to compile the libpq
client libraries on the Win32 platform. Since the libpq communications
part has been rewritten, this has become much easier. Enclosed is
a patch that will allow at least Microsoft Visual C++ to compile
libpq into both a static and a dynamic library. I will take a look
at porting the psql frontend as well, but I figured it was a good
idea to send in these patches first - so no major changes are done
to the files before it gets applied (if it does).
Regards,
Magnus Hagander
I have implemented a framework of encoding translation between the
backend and the frontend. Also I have added a new variable setting
command:
SET CLIENT_ENCODING TO 'encoding';
Other features include:
Latin1 support more 8 bit cleaness
See doc/README.mb for more details. Note that the pacthes are
against May 30 snapshot.
Tatsuo Ishii
1. Rewritten libpq to allow asynchronous clients.
2. Implemented client side of cancel protocol in library,
and patched psql.c to send a cancel request upon SIGINT. The
backend doesn't notice it yet :-(
3. Implemented 'Z' protocol message addition and renaming of
copy in/out start messages. These are implemented conditionally,
ie, the client protocol version is checked; so the code should
still work with 1.0 clients.
4. Revised protocol and libpq sgml documents (don't have an SGML
compiler, though, so there may be some markup glitches here).
What remains to be done:
1. Implement addition of atttypmod field to RowDescriptor messages.
The client-side code is there but ifdef'd out. I have no idea
what to change on the backend side. The field should be sent
only if protocol >= 2.0, of course.
2. Implement backend response to cancel requests received as OOB
messages. (This prolly need not be conditional on protocol
version; just do it if you get SIGURG.)
3. Update libpq.3. (I'm hoping this can be generated mechanically
from libpq.sgml... if not, will do it by hand.) Is there any
other doco to fix?
4. Update non-libpq interfaces as necessary. I patched libpgtcl
so that it would compile, but haven't tested it. Dunno what
needs to be done with the other interfaces.
Have at it!
Tom Lane
Here's a fix for a tiny memory leak in PQsetdb/PQfinish.
(Analysis of a running program indicates there are several others, but
this is the only obvious one I saw in the code).
a dumpall. This has been happening when a second \connect is
encountered.
The faulty code was in fe-connect.c, where the memory for the user
password was freed, but the pointer itself was not set to NULL.
Later, the memory was reused and the password appeared not to be
empty, so that an attempt was made to reference it.
Oliver Elphick
I haven't had final confirmation from Peter yet, but the attached patch
needs to be applied for the Beta otherwise password and crypt
authentication just won't work.
It puts back the loop in libpq and also fixes a couple of problems with
maintaining compatability with pre-6.3 drivers.
Attached is the patch to fix the warning messages from my code. I also
fixed one which wasn't my code. Apart from the usual warnings about the
bison/yacc generated code I only have one other warning message. This
is in gramm.y around line 2234. I wasn't sure of the fix.
I've also replaced all the calls to free() in gramm.y to calls to
pfree(). Without these I was getting backend crashes with GRANT. This
might already have been fixed.
This has a problem when using any authentication other than trust or
ident.
Anything using libpq will hang, because the client will go into a loop
while connecting. The following patch simply comments out two lines (a do
and a while), removing the loop. Going through the new scheme, I can't see
why this do..while loop is in there.
I've completed the patch to fix the protocol and authentication issues I
was discussing a couple of weeks ago. The particular changes are:
- the protocol has a version number
- network byte order is used throughout
- the pg_hba.conf file is used to specify what method is used to
authenticate a frontend (either password, ident, trust, reject, krb4
or krb5)
- support for multiplexed backends is removed
- appropriate changes to man pages
- the -a switch to many programs to specify an authentication service
no longer has any effect
- the libpq.so version number has changed to 1.1
The new backend still supports the old protocol so old interfaces won't
break.
OK, here comes a patch, DBD::Pg (and possibly other 3rd party clients)
can connect to unix sockets.
Patch is against current source tree.
Background:
libpq set some policy for client, which it should not
IMHO. It prevent some 3rd party clients to connect with
unix domain sockets etc.
Rename PG_DATESTYLE to PGDATESTYLE environment variable.
Move environment variable code to a different place so it now works!
Note that regression tests can now run with "setenv PGTZ PST8PDT"
at the frontend rather than requiring the backend to have TZ set.
Bruce Momjian
Marc G. Fournier
Tom Lane
Vadim B. Mikheev
Thomas G. Lockhart