to suppress zero-padding of "name" entries in indexes.
The alignment change is unlikely to save any space, but it is really needed
anyway to make the world safe for our widespread practice of passing plain
old C strings to functions that are declared as taking Name. In the previous
coding, the C compiler was entitled to assume that a Name pointer was
word-aligned; but we were failing to guarantee that. I think the reason
we'd not seen failures is that usually the only thing that gets done with
such a pointer is strcmp(), which is hard to optimize in a way that exploits
word-alignment. Still, some enterprising compiler guy will probably think
of a way eventually, or we might change our code in a way that exposes
more-obvious optimization opportunities.
The padding change is accomplished in one-liner fashion by declaring the
"name" index opclasses to use storage type "cstring" in pg_opclass.h.
Normally btree and hash don't allow a nondefault storage type, because they
don't have any provisions for converting the input datum to another type.
However, because name and cstring are effectively the same thing except for
padding, no conversion is needed --- we only need index_form_tuple() to treat
the datum as being cstring not name, and this is sufficient. This seems to
make for about a one-third reduction in the typical sizes of system catalog
indexes that involve "name" columns, of which we have many.
These two changes are only weakly related, but the alignment change makes
me feel safer that the padding change won't introduce problems, so I'm
committing them together.
in pg_proc. Also make it not emit duplicate extern declarations, and make it
a bit more bulletproof in some other small ways. Likewise fix the equally
hard-wired, and utterly undocumented, knowledge in the MSVC build scripts.
For testing purposes and perhaps other uses in future, pull out that portion
of the MSVC scripts into a standalone perl script equivalent to
Gen_fmgrtab.sh, and make it generate actually identical output, rather than
just more-or-less-the-same output.
Motivated by looking at Pavel's variadic function patch. Whether or not
that gets accepted, we can be sure that pg_proc's column set will change
again in the future; it's time to not have to deal with this gotcha.
unnecessary cache resets. The major changes are:
* When the queue overflows, we only issue a cache reset to the specific
backend or backends that still haven't read the oldest message, rather
than resetting everyone as in the original coding.
* When we observe backend(s) falling well behind, we signal SIGUSR1
to only one backend, the one that is furthest behind and doesn't already
have a signal outstanding for it. When it finishes catching up, it will
in turn signal SIGUSR1 to the next-furthest-back guy, if there is one that
is far enough behind to justify a signal. The PMSIGNAL_WAKEN_CHILDREN
mechanism is removed.
* We don't attempt to clean out dead messages after every message-receipt
operation; rather, we do it on the insertion side, and only when the queue
fullness passes certain thresholds.
* Split SInvalLock into SInvalReadLock and SInvalWriteLock so that readers
don't block writers nor vice versa (except during the infrequent queue
cleanout operations).
* Transfer multiple sinval messages for each acquisition of a read or
write lock.
corresponding struct definitions. This allows other headers to avoid including
certain highly-loaded headers such as rel.h and relscan.h, instead using just
relcache.h, heapam.h or genam.h, which are more lightweight and thus cause less
unnecessary dependencies.
int2-and-int8 implementations of the basic arithmetic operators +, -, *, /.
This doesn't really add any new functionality, but it avoids "operator is not
unique" failures that formerly occurred in these cases because the parser
couldn't decide whether to promote the int2 to int4 or int8. We could
alternatively have removed the existing cross-type operators, but
experimentation shows that the cost of an additional type coercion expression
node is noticeable compared to such cheap operators; so let's not give up any
performance here. On the other hand, I removed the int2-and-int4 modulo (%)
operators since they didn't seem as important from a performance standpoint.
Per a complaint last January from ykhuang.
forks. XLogOpenRelation() and the associated light-weight relation cache in
xlogutils.c is gone, and XLogReadBuffer() now takes a RelFileNode as argument,
instead of Relation.
For functions that still need a Relation struct during WAL replay, there's a
new function called CreateFakeRelcacheEntry() that returns a fake entry like
XLogOpenRelation() used to.
This is needed because :: casting binds more tightly than minus, so for
example -1::integer is not the same as (-1)::integer, and there are cases
where the difference is important. In particular this caused a failure
in SELECT DISTINCT ... ORDER BY ... where expressions that should have
matched were seen as different by the parser; but I suspect that there
could be other cases where failure to parenthesize leads to subtler
semantic differences in reloaded rules. Per report from Alexandr Popov.
This is required on Windows due to the special locale
handling for UTF8 that doesn't change the full environment.
Fixes crash with translated error messages per bugs 4180
and 4196.
Tom Lane
the associated datatype as their equality member. This means that these
opclasses can now support plain equality comparisons along with LIKE tests,
thus avoiding the need for an extra index in some applications. This
optimization was not possible when the pattern opclasses were first introduced,
because we didn't insist that text equality meant bitwise equality; but we
do now, so there is no semantic difference between regular and pattern
equality operators.
I removed the name_pattern_ops opclass altogether, since it's really useless:
name's regular comparisons are just strcmp() and are unlikely to become
something different. Instead teach indxpath.c that btree name_ops can be
used for LIKE whether or not the locale is C. This might lead to a useful
speedup in LIKE queries on the system catalogs in non-C locales.
The ~=~ and ~<>~ operators are gone altogether. (It would have been nice to
keep them for backward compatibility's sake, but since the pg_amop structure
doesn't allow multiple equality operators per opclass, there's no way.)
A not-immediately-obvious incompatibility is that the sort order within
bpchar_pattern_ops indexes changes --- it had been identical to plain
strcmp, but is now trailing-blank-insensitive. This will impact
in-place upgrades, if those ever happen.
Per discussions a couple months ago.
called before, not after, calling the assign_hook if any. This is because
push_old_value might fail (due to palloc out-of-memory), and in that case
there would be no stack entry to tell transaction abort to undo the GUC
assignment. Of course the actual assignment to the GUC variable hasn't
happened yet --- but the assign_hook might have altered subsidiary state.
Without a stack entry we won't call it again to make it undo such actions.
So this is necessary to make the world safe for assign_hooks with side
effects. Per a discussion a couple weeks ago with Magnus.
Back-patch to 8.0. 7.x did not have the problem because it did not have
allocatable stacks of GUC values.
functions.
Note that because this patch changes FmgrInfo, any external C functions
you might be testing with 8.4 will need to be recompiled.
Patch by Martin Pihlak, some editorialization by me (principally, removing
tracking of getrusage() numbers)
There are two ways to track a snapshot: there's the "registered" list, which
is used for arbitrary long-lived snapshots; and there's the "active stack",
which is used for the snapshot that is considered "active" at any time.
This also allows users of snapshots to stop worrying about snapshot memory
allocation and freeing, and about using PG_TRY blocks around ActiveSnapshot
assignment. This is all done automatically now.
As a consequence, this allows us to reset MyProc->xmin when there are no
more snapshots registered in the current backend, reducing the impact that
long-running transactions have on VACUUM.
unnecessary #include lines in it. Also, move some tuple routine prototypes and
macros to htup.h, which allows removal of heapam.h inclusion from some .c
files.
For this to work, a new header file access/sysattr.h needed to be created,
initially containing attribute numbers of system columns, for pg_dump usage.
While at it, make contrib ltree, intarray and hstore header files more
consistent with our header style.
instead of calling a bunch of individual functions.
This function can also be called directly, taking a PID as an argument, to
return only the data for a single PID.
These changes assume that the varchar and xml data types are represented
the same as text. (I did not, however, accept the portions of the proposed
patch that wanted to assume bytea is the same as text --- tgl.)
Brendan Jurd
it vary with BLCKSZ as before. This agrees with what the documentation says,
and avoids a regression test problem when BLCKSZ is larger than default.
Per recent discussion.
do CancelBackup at a sane place, fix some oversights in the state transitions,
allow only superusers to connect while we are waiting for backup mode to end.
where Datum is 8 bytes wide. Since this will break old-style C functions
(those still using version 0 calling convention) that have arguments or
results of these types, provide a configure option to disable it and retain
the old pass-by-reference behavior. Likewise, provide a configure option
to disable the recently-committed float4 pass-by-value change.
Zoltan Boszormenyi, plus configurability stuff by me.
I never understood why initial authors GiST in pgsql choose so
stgrange signature for 'same' method:
bool *sameFn(Datum a, Datum b, bool* result)
instead of simple, logical
bool sameFn(Datum a, Datum b)
This change will break any existing GiST extension, so we still live with
it and will live.
uses of the long-deprecated float32 in contrib/seg; the definitions themselves
are still there, but no longer used. fmgr/README updated to match.
I added a CREATE FUNCTION to account for existing seg_center() code in seg.c
too, and some tests for it and the neighbor functions. At the same time,
remove checks for NULL which are not needed (because the functions are declared
STRICT).
I had to do some adjustments to contrib's btree_gist too. The choices for
representation there are not ideal for changing the underlying types :-(
Original patch by Zoltan Boszormenyi, with some adjustments by me.
of each plan node, instead of its former behavior of dumping the internal
representation of the plan tree. The latter display is still available for
those who really want it (see debug_print_plan), but uses for it are certainly
few and and far between. Per discussion.
This patch also removes the explain_pretty_print GUC, which is obsoleted
by the change.
it is trying to build a relcache entry for. This is an oversight in my 8.2
patch that tried to ensure we always took a lock on a relation before trying
to build its relcache entry. The implication is that if someone committed a
reindex of a critical system index at about the same time that some other
backend were starting up without a valid pg_internal.init file, the second one
might PANIC due to not seeing any valid version of the index's pg_class row.
Improbable case, but definitely not impossible.
"consistent" functions, and remove pg_amop.opreqcheck, as per recent
discussion. The main immediate benefit of this is that we no longer need
8.3's ugly hack of requiring @@@ rather than @@ to test weight-using tsquery
searches on GIN indexes. In future it should be possible to optimize some
other queries better than is done now, by detecting at runtime whether the
index match is exact or not.
Tom Lane, after an idea of Heikki's, and with some help from Teodor.
no particular need to do get_op_opfamily_properties() while building an
indexscan plan. Postpone that lookup until executor start. This simplifies
createplan.c a lot more than it complicates nodeIndexscan.c, and makes things
more uniform since we already had to do it that way for RowCompare
expressions. Should be a bit faster too, at least for plans that aren't
re-used many times, since we avoid palloc'ing and perhaps copying the
intermediate list data structure.
going through DatumGetPointer or some other "official" conversion macro.
Not actually a bug, since Datum the same size as pointer is the only
supported case at the moment, but good cleanup for the future.
Gavin Sherry
systable_endscan_ordered that have API similar to systable_beginscan etc
(in particular, the passed-in scankeys have heap not index attnums),
but guarantee ordered output, unlike the existing functions. For the moment
these are just very thin wrappers around index_beginscan/index_getnext/etc.
Someday they might need to get smarter; but for now this is just a code
refactoring exercise to reduce the number of direct callers of index_getnext,
in preparation for changing that function's API.
In passing, remove index_getnext_indexitem, which has been dead code for
quite some time, and will have even less use than that in the presence
of run-time-lossy indexes.
input functions that include garbage bytes in their results. Provide a
compile-time option RANDOMIZE_ALLOCATED_MEMORY to make palloc fill returned
blocks with variable contents. This option also makes the parser perform
conversions of literal constants twice and compare the results, emitting a
WARNING if they don't match. (This is the code I used to catch the input
function bugs fixed in the previous commit.) For the moment, I've set it
to be activated automatically by --enable-cassert.
results to contain uninitialized, unpredictable values. While this was okay
as far as the datatypes themselves were concerned, it's a problem for the
parser because occurrences of the "same" literal might not be recognized as
equal by datumIsEqual (and hence not by equal()). It seems sufficient to fix
this in the input functions since the only critical use of equal() is in the
parser's comparisons of ORDER BY and DISTINCT expressions.
Per a trouble report from Marc Cousin.
Patch all the way back. Interestingly, array_in did not have the bug before
8.2, which may explain why the issue went unnoticed for so long.
the columns it works with to be domains over the expected type, not just
exactly the expected type. In passing, fix ts_stat() the same way.
Per report from Markus Wollny.
modules are built. Foremost, it creates a solid distinction between these two
types of targets based on what had already been implemented and duplicated in
ad hoc ways before. Specifically,
- Dynamically loadable modules no longer get a soname. The numbers previously
set in the makefiles were dummy numbers anyway, and the presence of a soname
upset a few packaging tools, so it is nicer not to have one.
- The cumbersome detour taken on installation (build a libfoo.so.0.0.0 and
then override the rule to install foo.so instead) is removed.
- Lots of duplicated code simplified.
algorithm. This is a good deal slower than our old roundoff-error-prone
code for long inputs, so we keep the old code for use in the transcendental
functions, where everything is approximate anyway. Also create a
user-accessible function div(numeric, numeric) to provide access to the
exact result of trunc(x/y) --- since the regular numeric / operator will
round off its result, simply computing that expression in SQL doesn't
reliably give the desired answer. This fixes bug #3387 and various related
corner cases, and improves the usefulness of PG for high-precision integer
arithmetic.
responsible for copying the query string into the new Portal. Such copying
is unnecessary in the common code path through exec_simple_query, and in
this case it can be enormously expensive because the string might contain
a large number of individual commands; we were copying the entire, long
string for each command, resulting in O(N^2) behavior for N commands.
(This is the cause of bug #4079.) A second problem with it is that
PortalDefineQuery really can't risk error, because if it elog's before
having set up the Portal, we will leak the plancache refcount that the
caller is trying to hand off to the portal. So go back to the design in
which the caller is responsible for making sure everything is copied into
the portal if necessary.
eval_const_expressions needs to be passed the PlannerInfo ("root") structure,
because in some cases we want it to substitute values for Param nodes.
(So "constant" is not so constant as all that ...) This mistake partially
disabled optimization of unnamed extended-Query statements in 8.3: in
particular the LIKE-to-indexscan optimization would never be applied if the
LIKE pattern was passed as a parameter, and constraint exclusion depending
on a parameter value didn't work either.
The places that did, eg,
(statbuf.st_mode & S_IFMT) == S_IFDIR
were correct, but there is no good reason not to use S_ISDIR() instead,
especially when that's what the other 90% of our code does. The places
that did, eg,
(statbuf.st_mode & S_IFDIR)
were flat out *wrong* and would fail in various platform-specific ways,
eg a symlink could be mistaken for a regular file on most Unixen.
The actual impact of this is probably small, since the problem cases
seem to always involve symlinks or sockets, which are unlikely to be
found in the directories that PG code might be scanning. But it's
clearly trouble waiting to happen, so patch all the way back anyway.
(There seem to be no occurrences of the mistake in 7.4.)
inclusions in src/include/catalog/*.h files. The main idea here is to push
function declarations for src/backend/catalog/*.c files into separate headers,
rather than sticking them into the corresponding catalog definition file as
has been done in the past. This commit only carries out that idea fully for
pg_proc, pg_type and pg_conversion, but that's enough for the moment ---
if pg_list.h ever becomes unsafe for frontend code to include, we'll need
to work a bit more.
Zdenek Kotala
snapmgmt.c file for the former. The header files have also been reorganized
in three parts: the most basic snapshot definitions are now in a new file
snapshot.h, and the also new snapmgmt.h keeps the definitions for snapmgmt.c.
tqual.h has been reduced to the bare minimum.
This patch is just a first step towards managing live snapshots within a
transaction; there is no functionality change.
Per my proposal to pgsql-patches on 20080318191940.GB27458@alvh.no-ip.org and
subsequent discussion.
strings. This patch introduces four support functions cstring_to_text,
cstring_to_text_with_len, text_to_cstring, and text_to_cstring_buffer, and
two macros CStringGetTextDatum and TextDatumGetCString. A number of
existing macros that provided variants on these themes were removed.
Most of the places that need to make such conversions now require just one
function or macro call, in place of the multiple notational layers that used
to be needed. There are no longer any direct calls of textout or textin,
and we got most of the places that were using handmade conversions via
memcpy (there may be a few still lurking, though).
This commit doesn't make any serious effort to eliminate transient memory
leaks caused by detoasting toasted text objects before they reach
text_to_cstring. We changed PG_GETARG_TEXT_P to PG_GETARG_TEXT_PP in a few
places where it was easy, but much more could be done.
Brendan Jurd and Tom Lane
identical to tuplestore_puttuple(), except it operates on arrays of
Datums + nulls rather than a fully-formed HeapTuple. In several places
that use the tuplestore API, this means we can avoid creating a
HeapTuple altogether, saving a copy.
friends. Avoid double translation of some messages, ensure other messages
are exposed for translation (and make them follow the style guidelines),
avoid unsafe passing of an unpredictable message text as a format string.
errdetail except the string goes only to the server log, replacing the normal
errdetail there. This provides a reasonably clean way of dealing with error
details that are too security-sensitive or too bulky to send to the client.
This commit just adds the infrastructure --- actual uses to follow.
except that it returns the string 'NULL', rather than a SQL null, when called
with a null argument. This is often a much more useful behavior for
constructing dynamic queries. Add more discussion to the documentation
about how to use these functions.
Brendan Jurd
a new typedef TimeOffset to represent an intermediate time value. It's
either int64 or double as appropriate, and in most usages will be measured
in microseconds or seconds the same as Timestamp. We don't call it
Timestamp, though, since the value doesn't necessarily represent an absolute
time instant.
Warren Turkal
ISO_8859-5 <-> MULE_INTERNAL conversion tables.
This was discovered when trying to convert a string containing those characters
from ISO_8859-5 to Windows-1251, because we use MULE_INTERNAL/KOI8R as an
intermediate encoding between those two.
While the missing "Yo" was just an omission in the conversion tables, there are
a few other characters like the "Numero" sign ("No" as a single character) that
exists in all the other cyrillic encodings (win1251, ISO_8859-5 and cp866), but
not in KOI8R. Added comments about that.
Patch by Sergey Burladyan. Back-patch to 7.4.
case where there is a match to the pattern overall but the user has specified
a parenthesized subexpression and that subexpression hasn't got a match.
An example is substring('foo' from 'foo(bar)?'). This should return NULL,
since (bar) isn't matched, but it was mistakenly returning the whole-pattern
match instead (ie, 'foo'). Per bug #4044 from Rui Martins.
This has been broken since the beginning; patch in all supported versions.
The old behavior was sufficiently inconsistent that it's impossible to believe
anyone is depending on it.
errors in any commands, including in various clean targets that have so far
been handled inconsistently. make -i is available to ignore all errors in
a consistent and official way.
support DTrace in the future.
Switch from using DTRACE_PROBEn macros to the dynamically generated macros.
Use "dtrace -h" to create a header file that contains the dynamically
generated macros to be used in the source code instead of the DTRACE_PROBEn
macros. A dummy header file is generated for builds without DTrace support.
Author: Robert Lor <Robert.Lor@sun.com>
oprofile shows that a nontrivial amount of time is being spent in
repeated calls to index_getprocinfo, which really only needs to be
called once. So do that, and inline _hash_datum2hashkey to make it
work.
bucket number, so as to ensure locality of access to the index during the
insertion step. Without this, building an index significantly larger than
available RAM takes a very long time because of thrashing. On the other
hand, sorting is just useless overhead when the index does fit in RAM.
We choose to sort when the initial index size exceeds effective_cache_size.
This is a revised version of work by Tom Raney and Shreya Bhargava.
deals with the queue, including locking etc, is all in sinvaladt.c. This means
that the struct definition of the queue, and the queue pointer, are now
internal "implementation details" inside sinvaladt.c.
Per my proposal dated 25-Jun-2007 and followup discussion.
that are reported as "equal" by wcscoll() are checked to see if they really
are bitwise equal, and are sorted per strcmp() if not. We made this happen
a couple of years ago in the regular code path, but it unaccountably got
left out of the Windows/UTF8 case (probably brain fade on my part at the
time). As in the prior set of changes, affected users may need to reindex
indexes on textual columns.
Backpatch as far as 8.2, which is the oldest release we are still supporting
on Windows.
messages if the calling transaction aborts later on. Collapsing out line
pointer redirects is a done deal as soon as we complete the page update,
so syscache *must* be notified even if the VACUUM FULL as a whole doesn't
complete. To fix, add some functionality to inval.c to allow the pending
inval messages to be sent immediately while heap_page_prune is still
running. The implementation is a bit chintzy: it will only work in the
context of VACUUM FULL. But that's all we need now, and it can always be
extended later if needed. Per my trouble report of a week ago.
than dividing them into 1GB segments as has been our longtime practice. This
requires working support for large files in the operating system; at least for
the time being, it won't be the default.
Zdenek Kotala
variables to it. More need to be converted, but I wanted to get this in
before it conflicts with too much...
Other than just centralising the text-to-int conversion for parameters,
this allows the pg_settings view to contain a list of available options
and allows an error hint to show what values are allowed.
With the addition of multiple autovacuum workers, our choices were to delete
the check, document the interaction with autovacuum_max_workers, or complicate
the check to try to hide that interaction. Since this restriction has never
been adequate to ensure backends can't run out of pinnable buffers, it doesn't
really have enough excuse to live to justify the second or third choices.
Per discussion of a complaint from Andreas Kling (see also bug #3888).
This commit also removes several documentation references to this restriction,
but I'm not sure I got them all.
pattern-examination heuristic method to purely histogram-driven selectivity at
histogram size 100, we compute both estimates and use a weighted average.
The weight put on the heuristic estimate decreases linearly with histogram
size, dropping to zero for 100 or more histogram entries.
Likewise in ltreeparentsel(). After a patch by Greg Stark, though I
reorganized the logic a bit to give the caller of histogram_selectivity()
more control.
of the generated range condition var >= 'foo' AND var < 'fop' as being less
than what eqsel() would estimate for var = 'foo'. This is intuitively
reasonable and it gets rid of the need for some entirely ad-hoc coding we
formerly used to reject bogus estimates. The basic problem here is that
if the prefix is more than a few characters long, the two boundary values
are too close together to be distinguishable by comparison to the column
histogram, resulting in a selectivity estimate of zero, which is often
not very sane. Change motivated by an example from Peter Eisentraut.
Arguably this is a bug fix, but I'll refrain from back-patching it
for the moment.
available output buffer when presented with corrupt input. Some testing
suggests that this slows the decompression loop about 1%, which seems an
acceptable price to pay for more robustness. (Curiously, the penalty
seems to be *less* on not-very-compressible data, which I didn't expect
since the overhead per output byte ought to be more in the literal-bytes
path.)
Patch from Zdenek Kotala. I fixed a corner case and did some renaming
of variables to make the routine more readable.
were discussed last year, but we felt it was too late in the 8.3 cycle to
change the code immediately. Specifically, the patch:
* Reduces the minimum datum size to be considered for compression from
256 to 32 bytes, as suggested by Greg Stark.
* Increases the required compression rate for compressed storage from
20% to 25%, again per Greg's suggestion.
* Replaces force_input_size (size above which compression is forced)
with a maximum size to be considered for compression. It was agreed
that allowing large inputs to escape the minimum-compression-rate
requirement was not bright, and that indeed we'd rather have a knob
that acted in the other direction. I set this value to 1MB for the
moment, but it could use some performance studies to tune it.
* Adds an early-failure path to the compressor as suggested by Jan:
if it's been unable to find even one compressible substring in the
first 1KB (parameterizable), assume we're looking at incompressible
input and give up. (Possibly this logic can be improved, but I'll
commit it as-is for now.)
* Improves the toasting heuristics so that when we have very large
fields with attstorage 'x' or 'e', we will push those out to toast
storage before considering inline compression of shorter fields.
This also responds to a suggestion of Greg's, though my original
proposal for a solution was a bit off base because it didn't fix
the problem for large 'e' fields.
There was some discussion in the earlier threads of exposing some
of the compression knobs to users, perhaps even on a per-column
basis. I have not done anything about that here. It seems to me
that if we are changing around the parameters, we'd better get some
experience and be sure we are happy with the design before we set
things in stone by providing user-visible knobs.
caches that we don't actually need to touch. This saves some trivial
number of cycles and avoids certain cases of deadlock when doing concurrent
VACUUM FULL on system catalogs. Per report from Gavin Roy.
Backpatch to 8.2. In earlier versions, CatalogCacheInitializeCache didn't
lock the relation so there's no deadlock risk (though that certainly had
plenty of risks of its own).
to explicitly cast the output back to char before comparing it to a char
value, else we get the wrong result for high-bit-set characters. Found by
Rolf Jentsch. Also, fix several places where <ctype.h> functions were being
called without casting the argument to unsigned char; this is likewise
unportable, but we keep making that mistake :-(. These found by buildfarm
member salamander, which I will desperately miss if it ever goes belly-up.
left in the code though it was not meant to be provided. It represents a
security hole because unprivileged users could use it to look at (at least the
first line of) any file readable by the backend. Fortunately, this is only
possible if the backend was built with XML support, so the damage is at least
mitigated; and 8.3 probably hasn't propagated into any security-critical uses
yet anyway. Per report from Sergey Burladyan.
"multi_call_ctx" to be a distinct sub-context of the EState's per-query
context, and delete the multi_call_ctx as soon as the SRF finishes
execution. This avoids leaking SRF memory until the end of the current
query, which is particularly egregious when the SRF is scanned
multiple times. This change also fixes a leak of the fields of the
AttInMetadata struct in shutdown_MultiFuncCall().
Also fix a leak of the SRF result TupleDesc when rescanning a
FunctionScan node. The TupleDesc is allocated in the per-query context
for every call to ExecMakeTableFunctionResult(), so we should free it
after calling that function. Since the SRF might choose to return
a non-expendable TupleDesc, we only free the TupleDesc if it is
not being reference-counted.
Backpatch to 8.3 and 8.2 stable branches.
values into \nnn octal escape sequences. When the database encoding is
multibyte this is *necessary* to avoid generating invalidly encoded text.
Even in a single-byte encoding, the old behavior seems very hazardous ---
consider for example what happens if the text is transferred to another
database with a different encoding. Decoding would then yield some other
bytea value than what was encoded, which is surely undesirable. Per gripe
from Hernan Gonzalez.
Backpatch to 8.3, but not further. This is a bit of a judgment call, but I
make it on these grounds: pre-8.3 we don't really have much encoding safety
anyway because of the convert() function family, and we would also have much
higher risk of breaking existing apps that may not be expecting this behavior.
8.3 is still new enough that we can probably get away with making this change
in the function's behavior.
(then it means 2000 AD). Formerly we silently interpreted this as 1 BC,
which at best is unwarranted familiarity with the implementation.
It's barely possible that some app somewhere expects the old behavior,
though, so we won't back-patch this into existing release branches.
Formerly, DecodeDate attempted to verify the day-of-the-month exactly, but
it was under the misapprehension that it would know whether we were looking
at a BC year or not. In reality this check can't be made until the calling
function (eg DecodeDateTime) has processed all the fields. So, split the
BC adjustment and validity checks out into a new function ValidateDate that
is called only after processing all the fields. In passing, this patch
makes DecodeTimeOnly work for BC inputs, which it never did before.
(The historical veracity of all this is nonexistent, of course, but if
we're going to say we support proleptic Gregorian calendar then we should
do it correctly. In any case the unpatched code is broken because it could
emit dates that it would then reject on re-inputting.)
Per report from Bernd Helmle. Back-patch as far as 8.0; in 7.x we were
not using our own calendar support and so this seems a bit too risky
to put into 7.4.
and RI_FKey_keyequal_upd_fk, as well as no-longer-needed calls of
ri_BuildQueryKeyFull. Aside from saving a few cycles, this avoids needless
deadlock risks when an update is not changing the columns that participate
in an RI constraint. Per a gripe from Alexey Nalbat.
Back-patch to 8.3. Earlier releases did have a need to open the other
relation due to the way in which they retrieved information about the RI
constraint, so this problem unfortunately can't easily be improved pre-8.3.
Tom Lane and Stephan Szabo
data structures and backend internal APIs. This solves problems we've seen
recently with inconsistent layout of pg_control between machines that have
32-bit time_t and those that have already migrated to 64-bit time_t. Also,
we can get out from under the problem that Windows' Unix-API emulation is not
consistent about the width of time_t.
There are a few remaining places where local time_t variables are used to hold
the current or recent result of time(NULL). I didn't bother changing these
since they do not affect any cross-module APIs and surely all platforms will
have 64-bit time_t before overflow becomes an actual risk. time_t should
be avoided for anything visible to extension modules, however.
the parser supplies a default typmod that can result in data loss (ie,
truncation). Currently that appears to be only CHARACTER and BIT.
We can avoid the problem by specifying the type's internal name instead
of using SQL-spec syntax. Since the queries generated here are only used
internally, there's no need to worry about portability. This problem is
new in 8.3; before we just let the parser do whatever it wanted to resolve
the operator, but 8.3 is trying to be sure that the semantics of FK checks
are consistent. Per report from Harald Fuchs.
Should fix a problem where two clusters are running under
two different service accounts and get colliding names,
causing only the first cluster to contain the pgident
event description.
Per report from Stephen Denne.
ri_FetchConstraintInfo, to avoid a query-duration memory leak when that
routine is called by RI_FKey_keyequal_upd_fk (which isn't executed in a
short-lived context). This problem was latent when the routine was added
in February, but it didn't become serious until the varvarlena patch made
it quite likely that the fields being examined would be "toasted" (ie, have
short headers). Per report from Stephen Denne.
in whichever context happens to be current during a call of an xml.c function,
use a dedicated context that will not go away until we explicitly delete it
(which we do at transaction end or subtransaction abort). This makes recovery
after an error much simpler --- we don't have to individually delete the data
structures created by libxml. Also, we need to initialize and cleanup libxml
only once per transaction (if there's no error) instead of once per function
call, so it should be a bit faster. We'll need to keep an eye out for
intra-transaction memory leaks, though. Alvaro and Tom.
Therefore we must xmlCleanupParser(), or we risk leaving behind
dangling pointers to whatever memory context is current when xml_init()
is called. This seems to fix bug #3860, though we might still want
the more invasive solution being worked on by Alvaro.
constant ORDER/GROUP BY entries properly:
http://archives.postgresql.org/pgsql-hackers/2001-04/msg00457.php
The original solution to that was in fact no good, as demonstrated by
today's report from Martin Pitt:
http://archives.postgresql.org/pgsql-bugs/2008-01/msg00027.php
We can't use the column-number-reference format for a constant that is
a resjunk targetlist entry, a case that was unfortunately not thought of
in the original discussion. What we can do instead (which did not work
at the time, but does work in 7.3 and up) is to emit the constant with
explicit ::typename decoration, even if it otherwise wouldn't need it.
This is sufficient to keep the parser from thinking it's a column number
reference, and indeed is probably what the user must have done to get
such a thing into the querytree in the first place.
and CLUSTER) execute as the table owner rather than the calling user, using
the same privilege-switching mechanism already used for SECURITY DEFINER
functions. The purpose of this change is to ensure that user-defined
functions used in index definitions cannot acquire the privileges of a
superuser account that is performing routine maintenance. While a function
used in an index is supposed to be IMMUTABLE and thus not able to do anything
very interesting, there are several easy ways around that restriction; and
even if we could plug them all, there would remain a risk of reading sensitive
information and broadcasting it through a covert channel such as CPU usage.
To prevent bypassing this security measure, execution of SET SESSION
AUTHORIZATION and SET ROLE is now forbidden within a SECURITY DEFINER context.
Thanks to Itagaki Takahiro for reporting this vulnerability.
Security: CVE-2007-6600
were reporting ERROR for interactive assignments and LOG for other cases,
some were saying nothing for non-interactive cases, and a few did yet other
things. Make them use a new function GUC_complaint_elevel() to establish
a reasonably uniform policy about how to report. There are still a few
edge cases such as assign_search_path(), but it's much better than before.
Per gripe from Devrim Gunduz and subsequent discussion.
As noted by Alvaro, it'd be better to fold these custom messages into the
standard "invalid parameter value" complaint from guc.c, perhaps as the DETAIL
field. However that will require more redesign than seems prudent for 8.3.
This is a relatively safe, low-impact change that we can afford to risk now.
print the index key variable or expression for that column. It was mistakenly
printing ASC/DESC/NULLS FIRST/NULLS LAST decoration too --- and not only for
the target column, but all columns. Someday we should have an option to
extract that info (and the opclass decoration as well) for a single index
column ... but today is not that day. Per bug #3829 and subsequent
discussion.
The zero-point case is sensible so far as the data structure is concerned,
so maybe we ought to allow it sometime; but right now the textual input
routines for these types don't allow it, and it seems that not all the
functions for the types are prepared to cope.
Report and patch by Merlin Moncure.
with the logged event. CSV logs are now a first-class citizen along plain
text logs in that they carry much of the same information.
Per complaint from depesz on bug #3799.
the two join variables at both ends: not only trailing rows that need not be
scanned because there cannot be a match on the other side, but initial rows
that will be scanned without possibly having a match. This allows a more
realistic estimate of startup cost to be made, per recent pgsql-performance
discussion. In passing, fix a couple of bugs that had crept into
mergejoinscansel: it was not quite up to speed for the task of estimating
descending-order scans, which is a new requirement in 8.3.
constraint status of copied indexes (bug #3774), as well as various other
small bugs such as failure to pstrdup when needed. Allow INCLUDING INDEXES
indexes to be merged with identical declared indexes (perhaps not real useful,
but the code is there and having it not apply to LIKE indexes seems pretty
unorthogonal). Avoid useless work in generateClonedIndexStmt(). Undo some
poorly chosen API changes, and put a couple of routines in modules that seem
to be better places for them.
but no database changes have been made since the last CommandCounterIncrement.
This should result in a significant improvement in the number of "commands"
that can typically be performed within a transaction before hitting the 2^32
CommandId size limit. In particular this buys back (and more) the possible
adverse consequences of my previous patch to fix plan caching behavior.
The implementation requires tracking whether the current CommandCounter
value has been "used" to mark any tuples. CommandCounter values stored into
snapshots are presumed not to be used for this purpose. This requires some
small executor changes, since the executor used to conflate the curcid of
the snapshot it was using with the command ID to mark output tuples with.
Separating these concepts allows some small simplifications in executor APIs.
Something for the TODO list: look into having CommandCounterIncrement not do
AcceptInvalidationMessages. It seems fairly bogus to be doing it there,
but exactly where to do it instead isn't clear, and I'm disinclined to mess
with asynchronous behavior during late beta.
reloading of operator class information on each use of LookupOpclassInfo.
Had this been in place a year ago, it would have helped me find a bug
in the then-new 'operator family' code. Now that we have a build farm
member testing CLOBBER_CACHE_ALWAYS on a regular basis, it seems worth
expending a little bit of effort here.
inappropriately generic-sounding names. This is more or less free since
we already forced initdb for the next beta, and it may prevent confusion or
name conflicts (particularly at the C-global-symbol level) down the road.
Per my proposal yesterday.
if the locale has the thousands separator as "". This now matches the
to_char and psql numericlocale behavior. (Previously this data type was
basically useless for such setups.)
happened to be right up against the end of memory, per report from
Matt Magoffin. While at it, avoid useless multiple copying of string
by not depending on xmlStrncatNew.
of this seems a bit marginal, if it's useful enough to be shown in the manual
then we probably ought to support doing it without double evaluation of the
ts_rank function. Per my proposal earlier today.
even in code paths where we don't pay any subsequent attention to the typmod
value. This seems needed in view of the fact that 8.3's generalized typmod
support will accept a lot of bogus syntax, such as "timestamp(foo)" or
"record(int, 42)" --- if we allow such things to pass without comment,
users will get confused. Per a recent example from Greg Stark.
To implement this in a way that's not very vulnerable to future
bugs-of-omission, refactor the API of parse_type.c's TypeName lookup routines
so that typmod validation is folded into the base lookup operation. Callers
can still choose not to receive the encoded typmod, but we'll check the
decoration anyway if it's present.
uninitialized value, and avoid invoking the function nine separate
times in the pg_xmlIsNameChar macro. Should resolve buildfarm failures.
Per report from Ben Leslie.
out that it's actually quite likely that a string that is an extension of
the given prefix will sort as larger than the "greater" string our previous
code created. To provide some defense against that, do the comparisons
against a modified string instead of just the bare prefix. We tack on
"Z", "z", "y", or "9", whichever is seen as largest in the current locale.
Testing suggests that this is sufficient at least for cases involving
ASCII data.
to validate the realm of the connecting user. By default
it's empty meaning no verification, which is the way
Kerberos authentication has traditionally worked in
PostgreSQL.
make_greater_string() try harder to generate a string that's actually greater
than its input string. Before we just assumed that making a string that was
memcmp-greater was enough, but it is easy to generate examples where this is
not so when the locale is not C. Instead, loop until the relevant comparison
function agrees that the generated string is greater than the input.
Unfortunately this is probably not enough to guarantee that the generated
string is greater than all extensions of the input, so we cannot relax the
restriction to C locale for the LIKE/regex index optimization. But it should
at least improve the odds of getting a useful selectivity estimate in
prefix_selectivity(). Per example from Guillaume Smet.
Backpatch to 8.1, mainly because that's what the complainant is using...
negated-match operators. patternsel had been using the supplied operator as
though it were a positive-match operator, and thus obtaining a wrong result,
which was even more wrong after the caller subtracted it from 1. Seems
cleanest to give patternsel an explicit "negate" argument so that it knows
what's going on. Also install the same factorization scheme for pattern
join selectivity estimators; even though they are just stubs at the
moment, this may keep someone from making the same type of mistake when
they get filled out. Per report from Greg Mullane.
Backpatch to 8.2 --- previous releases do not show the problem because
patternsel() doesn't actually use the operator directly.
Add some more xml_init() calls that might not be necessary, but seem like a
good idea to avoid possible problems like we saw in xmlelement().
Fix unsafe assumption that you can keep using the tupledesc of a relcache
entry you don't have open.
Add missing error checks for SearchSysCache failure.
Get rid of handwritten array traversal in xpath() and O(N^2), broken-for-nulls
array access code in map_sql_value_to_xml_value(), in favor of using
deconstruct_array.
Manually adjust a lot of line breaks in places where the code is otherwise
gonna look pretty awful after pg_indent hacks it up (original author seems to
have liked to lay out code for a 200-column window).
assuming that evaluation of its input expressions won't change the state of
libxml. This requires refactoring xml_init() to not call xmlInitParser(),
since now not all of its callers want that. I also tweaked things to avoid
repeated execution of one-time-only tests inside xml_init(), though this is
mostly for clarity rather than in hopes of saving any noticeable amount of
runtime. Per report from Sheikh Amjad and subsequent discussion.
In passing, fix a couple of inadequately schema-qualified queries.
and ts_stat(), per my recent suggestion. Also add a possibly-not-needed-
but-can't-hurt check for NULL SPI_tuptable, before we try to dereference
same.
if there are zero rows to aggregate over, and the API seems both conceptually
and notationally ugly anyway. We should look for something that improves
on the tsquery-and-text-SELECT version (which is also pretty ugly but at
least it works...), but it seems that will take query infrastructure that
doesn't exist today. (Hm, I wonder if there's anything in or near SQL2003
window functions that would help?) Per discussion.
miscomputation of required palloc size. The crash could only occur if the
input contained lexemes both with and without positions, which is probably not
common in practice. The miscomputation would definitely result in wasted
space. Also fix some inconsistent coding around alignment of strings and
positions in a tsvector value; these errors could also lead to crashes given
mixed with/without position data and a machine that's picky about alignment.
And be more careful about checking for overflow of string offsets.
Patch is only against HEAD --- I have not looked to see if same bugs are
in back-branch contrib/tsearch2 code.
coding this was seen as useless, but the problem with not including them
is that the error message will often be something about authentication
failure, rather than the more helpful one about 'role is not permitted
to log in'. Per discussion.
renumbering of encoding IDs done between 8.2 and 8.3 turns out to break 8.2
initdb and psql if they are run with an 8.3beta1 libpq.so. For the moment
we can rearrange the order of enum pg_enc to keep the same number for
everything except PG_JOHAB, which isn't a problem since there are no direct
references to it in the 8.2 programs anyway. (This does force initdb
unfortunately.)
Going forward, we want to fix things so that encoding IDs can be changed
without an ABI break, and this commit includes the changes needed to allow
libpq's encoding IDs to be treated as fully independent of the backend's.
The main issue is that libpq clients should not include pg_wchar.h or
otherwise assume they know the specific values of libpq's encoding IDs,
since they might encounter version skew between pg_wchar.h and the libpq.so
they are using. To fix, have libpq officially export functions needed for
encoding name<=>ID conversion and validity checking; it was doing this
anyway unofficially.
It's still the case that we can't renumber backend encoding IDs until the
next bump in libpq's major version number, since doing so will break the
8.2-era client programs. However the code is now prepared to avoid this
type of problem in future.
Note that initdb is no longer a libpq client: we just pull in the two
source files we need directly. The patch also fixes a few places that
were being sloppy about checking for an unrecognized encoding name.
it affects. The original coding neglected tablespace entirely (causing
the indexes to move to the database's default tablespace) and for an index
belonging to a UNIQUE or PRIMARY KEY constraint, it would actually try to
assign the parent table's reloptions to the index :-(. Per bug #3672 and
subsequent investigation.
8.0 and 8.1 did not have reloptions, but the tablespace bug is present.
a relation as a reason to invalidate a plan when the relation changes. This
handles scenarios such as dropping/recreating a sequence that is referenced by
nextval('seq') in a cached plan. Rather than teach plancache.c all about
digging through plan trees to find regclass Consts, we charge the planner's
setrefs.c with making a list of the relation OIDs on which each plan depends.
That way the list can be built cheaply during a plan tree traversal that has
to happen anyway. Per bug #3662 and subsequent discussion.
the same transaction can be identified even when no regular XID was assigned.
This seems essential after addition of the lazy-XID patch. Also some
minor code cleanup in write_csvlog().
- create a separate archive_mode GUC, on which archive_command is dependent
- %r option in recovery.conf sends last restartpoint to recovery command
- %r used in pg_standby, updated README
- minor other code cleanup in pg_standby
- doc on Warm Standby now mentions pg_standby and %r
- log_restartpoints recovery option emits LOG message at each restartpoint
- end of recovery now displays last transaction end time, as requested
by Warren Little; also shown at each restartpoint
- restart archiver if needed to carry away WAL files at shutdown
Simon Riggs
buffers that cannot possibly need to be cleaned, and estimates how many
buffers it should try to clean based on moving averages of recent allocation
requests and density of reusable buffers. The patch also adds a couple
more columns to pg_stat_bgwriter to help measure the effectiveness of the
bgwriter.
Greg Smith, building on his own work and ideas from several other people,
in particular a much older patch from Itagaki Takahiro.
* stats_start_collector goes away; we always start the collector process,
unless prevented by a problem with setting up the stats UDP socket.
* stats_reset_on_server_start goes away; it seems useless in view of the
availability of pg_stat_reset().
* stats_block_level and stats_row_level are merged into a single variable
"track_counts", which controls all reports sent to the collector process.
* stats_command_string is renamed to track_activities.
* log_autovacuum is renamed to log_autovacuum_min_duration to better reflect
its meaning.
The log_autovacuum change is not a compatibility issue since it didn't exist
before 8.3 anyway. The other changes need to be release-noted.
buildfarm member grebe, I see no reason to revert the 1-byte-header-friendly
changes I made in varlena.c. Instead, tweak the code a little bit to
get more advantage out of that.
character encodings that doesn't involve calling lower(). This should
cure the performance regression in this case complained of by Guillaume
Smet. It still leaves the horrid performance for multi-byte encodings
introduced in 8.2, but there's no obvious solution for that in sight.
demonstrably necessary for text_substring() since regexp_split functions
may pass it such a value; and we might as well convert the whole file
at once. Per buildfarm results (though I wonder why most machines aren't
showing a failure).
to not cause needless copying of text datums that have 1-byte headers.
Greg Stark, in response to performance gripe from Guillaume Smet and
ITAGAKI Takahiro.
TransactionIdDidAbort, when handling the case that xmin is one of the current
transaction's XIDs and the tuple has been deleted. xmax must also be one of
the current transaction's XIDs, since no one else can see it yet, and it's
cheaper to look at local state than shared state to find out if xmax aborted.
Per an idea of Heikki's.
columns, and the new version can be stored on the same heap page, we no longer
generate extra index entries for the new version. Instead, index searches
follow the HOT-chain links to ensure they find the correct tuple version.
In addition, this patch introduces the ability to "prune" dead tuples on a
per-page basis, without having to do a complete VACUUM pass to recover space.
VACUUM is still needed to clean up dead index entries, however.
Pavan Deolasee, with help from a bunch of other people.
values. The previous coding essentially assumed that x = sqrt(x*x), which
does not hold for x < 0.
Thanks to Jie Zhang at Greenplum and Gavin Sherry for reporting this
issue.
database via builtin functions, as recently discussed on -hackers.
chr() now returns a character in the database encoding. For UTF8 encoded databases
the argument is treated as a Unicode code point. For other multi-byte encodings
the argument must designate a strict ascii character, or an error is raised,
as is also the case if the argument is 0.
ascii() is adjusted so that it remains the inverse of chr().
The two argument form of convert() is gone, and the three argument form now
takes a bytea first argument and returns a bytea. To cover this loss three new
functions are introduced:
. convert_from(bytea, name) returns text - converts the first argument from the
named encoding to the database encoding
. convert_to(text, name) returns bytea - converts the first argument from the
database encoding to the named encoding
. length(bytea, name) returns int - gives the length of the first argument in
characters in the named encoding
* Defined new struct WordEntryPosVector that holds a uint16 length and a
variable size array of WordEntries. This replaces the previous
convention of a variable size uint16 array, with the first element
implying the length. WordEntryPosVector has the same layout in memory,
but is more readable in source code. The POSDATAPTR and POSDATALEN
macros are still used, though it would now be more readable to access
the fields in WordEntryPosVector directly.
* Removed needfree field from DocRepresentation. It was always set to false.
* Miscellaneous other commenting and refactoring
transaction, unless rolled back or overridden by a SET clause for the same
variable attached to a surrounding function call. Per discussion, these
seem the best semantics. Note that this is an INCOMPATIBLE CHANGE: in 8.0
through 8.2, SET LOCAL's effects disappeared at subtransaction commit
(leading to behavior that made little sense at the SQL level).
I took advantage of the opportunity to rewrite and simplify the GUC variable
save/restore logic a little bit. The old idea of a "tentative" value is gone;
it was a hangover from before we had a stack. Also, we no longer need a stack
entry for every nesting level, but only for those in which a variable's value
actually changed.
and in passing, fix some bogosities dating from the custom_variable_classes
patch. Fix guc-file.l to correctly check changes in custom_variable_classes
that are attempted concurrently with additions/removals of custom variables,
and don't allow the new setting to be applied in advance of checking it.
Clean up messy and undocumented situation for string variables with NULL
boot_val. Fix DefineCustomVariable functions to initialize boot_val
correctly. Prevent find_option from inserting bogus placeholders for custom
variables that are simply inquired about rather than being set.
ReadNewTransactionId from GetSnapshotData --- with a "latestCompletedXid"
variable that is updated during transaction commit or abort. Since
latestCompletedXid is written only in places that had to lock ProcArrayLock
exclusively anyway, and is read only in places that had to lock ProcArrayLock
shared anyway, it adds no new locking requirements to the system despite being
cluster-wide. Moreover, removing ReadNewTransactionId from snapshot
acquisition eliminates the need to take both XidGenLock and ProcArrayLock at
the same time. Since XidGenLock is sometimes held across I/O this can be a
significant win. Some preliminary benchmarking suggested that this patch has
no effect on average throughput but can significantly improve the worst-case
transaction times seen in pgbench. Concept by Florian Pflug, implementation
by Tom Lane.
- change the alignment requirement of lexemes in TSVector slightly.
Lexeme strings were always padded to 2-byte aligned length to make sure
that if there's position array (uint16[]) it has the right alignment.
The patch changes that so that the padding is not done when there's no
positions. That makes the storage of tsvectors without positions
slightly more compact.
- added some #include "miscadmin.h" lines I missed in the earlier when I
added calls to check_stack_depth().
- Reimplement the send/recv functions, and added a comment
above them describing the on-wire format. The CRC is now recalculated in
tsquery as well per previous discussion.
- add code to check that the query tree is well-formed. It was indeed
possible to send malformed queries in binary mode, which produced all
kinds of strange results.
- make the left-field a uint32. There's no reason to
arbitrarily limit it to 16-bits, and it won't increase the disk/memory
footprint either now that QueryOperator and QueryOperand are separate
structs.
- add check_stack_depth() call to all recursive functions I found.
Some of them might have a natural limit so that you can't force
arbitrarily deep recursions, but check_stack_depth() is cheap enough
that seems best to just stick it into anything that might be a problem.
small editorization by me
- Brake the QueryItem struct into QueryOperator and QueryOperand.
Type was really the only common field between them. QueryItem still
exists, and is used in the TSQuery struct as before, but it's now a
union of the two. Many other changes fell from that, like separation
of pushval_asis function into pushValue, pushOperator and pushStop.
- Moved some structs that were for internal use only from header files
to the right .c-files.
- Moved tsvector parser to a new tsvector_parser.c file. Parser code was
about half of the size of tsvector.c, it's also used from tsquery.c, and
it has some data structures of its own, so it seems better to separate
it. Cleaned up the API so that TSVectorParserState is not accessed from
outside tsvector_parser.c.
- Separated enumerations (#defines, really) used for QueryItem.type
field and as return codes from gettoken_query. It was just accidental
code sharing.
- Removed ParseQueryNode struct used internally by makepol and friends.
push*-functions now construct QueryItems directly.
- Changed int4 variables to just ints for variables like "i" or "array
size", where the storage-size was not significant.
rows will normally never obtain an XID at all. We already did things this way
for subtransactions, but this patch extends the concept to top-level
transactions. In applications where there are lots of short read-only
transactions, this should improve performance noticeably; not so much from
removal of the actual XID-assignments, as from reduction of overhead that's
driven by the rate of XID consumption. We add a concept of a "virtual
transaction ID" so that active transactions can be uniquely identified even
if they don't have a regular XID. This is a much lighter-weight concept:
uniqueness of VXIDs is only guaranteed over the short term, and no on-disk
record is made about them.
Florian Pflug, with some editorialization by Tom.
(Actually, it works as a plain statement too, but I didn't document that
because it seems a bit useless.) Unify VariableResetStmt with
VariableSetStmt, and clean up some ancient cruft in the representation of
same.
There are still some loose ends: I didn't do anything about the SET FROM
CURRENT idea yet, and it's not real clear whether we are happy with the
interaction of SET LOCAL with function-local settings. The documentation
is a bit spartan, too.
regardless of the number of tuples involved, it's incorrect to skip it
when memtupcount = 1; the number of cycles saved is minuscule anyway.
An alternative solution would be to pull the state changes out to the
call site in tuplesort_performsort, but keeping them near the corresponding
changes in make_bounded_heap seems marginally cleaner. Noticed by
Greg Stark.
the number of rows likely to be produced by a query such as
SELECT * FROM t1 LEFT JOIN t2 USING (key) WHERE t2.key IS NULL;
What this is doing is selecting for t1 rows with no match in t2, and thus
it may produce a significant number of rows even if the t2.key table column
contains no nulls at all. 8.2 thinks the table column's null fraction is
relevant and thus may estimate no rows out, which results in terrible plans
if there are more joins above this one. A proper fix for this will involve
passing much more information about the context of a clause to the selectivity
estimator functions than we ever have. There's no time left to write such a
patch for 8.3, and it wouldn't be back-patchable into 8.2 anyway. Instead,
put in an ad-hoc test to defeat the normal table-stats-based estimation when
an IS NULL test is evaluated at an outer join, and just use a constant
estimate instead --- I went with 0.5 for lack of a better idea. This won't
catch every case but it will catch the typical ways of writing such queries,
and it seems unlikely to make things worse for other queries.
checks for individual-table-size functions, since anyone in the database could
get approximate values from pg_class.relpages anyway. Allow database-size to
users with CONNECT privilege for the target database (note that this is
granted by default). Allow tablespace-size if the user has CREATE privilege
on the tablespace (which is *not* granted by default), or if the tablespace is
the default tablespace for the current database (since we treat that as
implicitly allowing use of the tablespace).
days that was obsolete the moment we had IN (SELECT ...) capability.
It's arguably a security hole since it applied no permissions check to
the table it searched, and since it was never documented anywhere,
removing it seems more appropriate than fixing it.
and pg_tablespace_size to superusers. Perhaps we could weaken the first
case to just require SELECT privilege, but that doesn't work for the
other cases, so use ownership as the common concept.
While it's not clear that TID linkage info is of any great use to a
nefarious user, it's certainly unexpected that these functions wouldn't
insist on read privileges.
init options of the template as top-level options in the syntax. This also
makes ALTER a bit easier to use, since options can be replaced individually.
I also made these statements verify that the tmplinit method will accept
the new settings before they get stored; in the original coding you didn't
find out about mistakes until the dictionary got invoked.
Under the hood, init methods now get options as a List of DefElem instead
of a raw text string --- that lets tsearch use existing options-pushing code
instead of duplicating functionality.
byte after the last full byte of the bit array, regardless of whether that
byte was part of the valid data or not. Found by buildfarm testing.
Thanks to Stefan Kaltenbrunner for nailing down the cause.
Oleg Bartunov and Teodor Sigaev, but I did a lot of editorializing,
so anything that's broken is probably my fault.
Documentation is nonexistent as yet, but let's land the patch so we can
get some portability testing done.
row within one query: we were firing check triggers before all the updates
were done, leading to bogus failures. Fix by making the triggers queued by
an RI update go at the end of the outer query's trigger event list, thereby
effectively making the processing "breadth-first". This was indeed how it
worked pre-8.0, so the bug does not occur in the 7.x branches.
Per report from Pavel Stehule.
that still thought they could set HEAP_XMAX_COMMITTED immediately after
seeing the other transaction commit. Make them use the same logic as
tqual.c does to determine if the hint bit can be set yet.
enlarge the memory chunk in-place when it was feasible to do so. This turns
out to not work well at all for scenarios involving repeated cycles of
palloc/repalloc/pfree: the eventually freed chunks go into the wrong freelist
for the next initial palloc request, and so we consume memory indefinitely.
While that could be defended against, the number of cases where the
optimization can still be applied drops significantly, and adjusting the
initial sizes of StringInfo buffers makes it drop to almost nothing.
Seems better to just remove the extra complexity.
Per recent discussion and testing.
regexp_split_to_table() within a single query. This is only a partial
solution, as it turns out that with enough matches per string these
functions can also tickle a repalloc() misbehavior. But fixing that
is a topic for a separate patch.
that cached compiled patterns will still be there when the function is next
called. Clean up looping logic, thereby fixing bug identified by Pavel
Stehule. Share setup code between the two functions, add some comments, and
avoid risky mixing of int and size_t variables. Clean up the documentation a
tad, and accept all the flag characters mentioned in table 9-19 rather than
just a subset.
child memory contexts is indented two spaces to the right of its
parent context. This should make it easier to deduce the memory
context hierarchy from the output of MemoryContextStats().
between the setting of log_line_prefix and the setting of log_timezone. We
can't realistically set log_timezone any earlier than we do now, so the best
behavior seems to be to use GMT zone if any timestamps are to be logged during
early startup. Create a dummy zone variable with a minimal definition of GMT
(in particular it will never know about leap seconds), so that we can set it
up without reference to any external files.
displayed in the postmaster log. This avoids Windows-specific problems with
localized time zone names that are in the wrong encoding, and generally seems
like a good idea to forestall other potential platform-dependent issues.
To preserve the existing behavior that all backends will log in the same time
zone, create a new GUC variable log_timezone that can only be changed on a
system-wide basis, and reference log-related calculations to that zone instead
of the TimeZone variable.
This fixes the issue reported by Hiroshi Saito that timestamps printed by
xlog.c startup could be improperly localized on Windows. We still need a
simpler patch for that problem in the back branches, however.
so that we will be able to create a cookie for all processes for CSVlogs.
It is set wherever MyProcPid is set. Take the opportunity to remove the now
unnecessary session-only restriction on the %s and %c escapes in log_line_prefix.
before reporting a transaction committed. Data consistency is still
guaranteed (unlike setting fsync = off), but a crash may lose the effects
of the last few transactions. Patch by Simon, some editorialization by Tom.
named pg_toast_temp_nnn, alongside the pg_temp_nnn schemas used for the temp
tables themselves. This allows low-level code such as the relcache to
recognize that these tables are indeed temporary, which enables various
optimizations such as not WAL-logging changes and using local rather than
shared buffers for access. Aside from obvious performance benefits, this
provides a solution to bug #3483, in which other backends unexpectedly held
open file references to temporary tables. The scheme preserves the property
that TOAST tables are not in any schema that's normally in the search path,
so they don't conflict with user table names.
initdb forced because of changes in system view definitions.
and fsync WAL at convenient intervals. For the moment it just tries to
offload this work from backends, but soon it will be responsible for
guaranteeing a maximum delay before asynchronously-committed transactions
will be flushed to disk.
This is a portion of Simon Riggs' async-commit patch, committed to CVS
separately because a background WAL writer seems like it might be a good idea
independently of the async-commit feature. I rebased walwriter.c on
bgwriter.c because it seemed like a more appropriate way of handling signals;
while the startup/shutdown logic in postmaster.c is more like autovac because
we want walwriter to quit before we start the shutdown checkpoint.
I/O utilization, per discussion.
While at it, lower the autovacuum vacuum and analyze threshold values to 50
tuples. It is a bit higher (i.e. more conservative) than what I originally
proposed but much better than the old values for small tables.
log_min_error_statement is active and there is some problem in logging the
current query string; for example, that it's too long to include in the log
message without running out of memory. This problem has existed since the
log_min_error_statement feature was introduced. No doubt the reason it
wasn't detected long ago is that 8.2 is the first release that defaults
log_min_error_statement to less than PANIC level.
Per report from Bill Moran.
when handed an invalidly-encoded pattern. The previous coding could get
into an infinite loop if pg_mb2wchar_with_len() returned a zero-length
string after we'd tested for nonempty pattern; which is exactly what it
will do if the string consists only of an incomplete multibyte character.
This led to either an out-of-memory error or a backend crash depending
on platform. Per report from Wiktor Wodecki.
define pg_dlsym() as returning a PGFunction pointer, not just any
pointer-to-function. But many are not. Suppress compiler warnings
on platforms that aren't careful by inserting explicit casts at the
two call sites that didn't have a cast already. Per Stefan.
unwarranted liberties with int8 vs float8 values for these types.
Specifically, be sure to apply either hashint8 or hashfloat8 depending
on HAVE_INT64_TIMESTAMP. Per my gripe of even date.
overruns (neither of which seem likely to be exploitable as security holes,
fortunately, since the provoker can't control the data written). One of
these is due to choosing to stomp on the output of a called function, which
is bad news in any case; make it treat the called functions' results as
read-only. Avoid some unnecessary palloc/pfree traffic too; it's not
really helpful to free small temporary objects, and again this is presuming
more than it ought to about the nature of the results of called functions.
Per report from Patrick Welche and additional code-reading by Imad.
over a fairly long period of time, rather than being spat out in a burst.
This happens only for background checkpoints carried out by the bgwriter;
other cases, such as a shutdown checkpoint, are still done at full speed.
Remove the "all buffers" scan in the bgwriter, and associated stats
infrastructure, since this seems no longer very useful when the checkpoint
itself is properly throttled.
Original patch by Itagaki Takahiro, reworked by Heikki Linnakangas,
and some minor API editorialization by me.
parse_int() and with itself (strtod allows leading whitespace, so it
seems odd not to allow trailing whitespace). parse_bool remains
not-whitespace-friendly, but this is generically true for non-numeric
GUC variables, so I'll desist from changing it.
contain a wrong unit specification, per discussion.
In passing, fix the code to avoid unnecessary integer overflows when
converting units, and to detect overflows when they do occur.
actually works sanely, viz not 0 and not more than INT_MAX/1000
(else TimestampTzPlusMilliseconds can overflow). Per discussion with
Greg Stark. Since this is a superuser-only setting and there was not
previously any big reason to change it, not worth back-patching.
within a signal handler (this might be safe given the relatively narrow code
range in which the interrupt is enabled, but it seems awfully risky); do issue
more informative log messages that tell what is being waited for and the exact
length of the wait; minor other code cleanup. Greg Stark and Tom Lane
unreserved according to the grammar. The list of unreserved words has gotten
extensive enough that the unnecessary quoting is becoming a bit of an eyesore.
To do this, add knowledge of the keyword category to keywords.c's table.
(Someday we might be able to generate keywords.c's table and the keyword lists
in gram.y from a common source.) For the moment, lie about WITH's status in
the table so it will still get quoted --- this is because of the expectation
that WITH will become reserved when the SQL recursive-queries patch gets done.
I didn't force initdb because this affects nothing on-disk; but note that a
few regression tests have changed expected output.
an array of strings rather than an array of integers, and allow any simple
constant or identifier to be used in typmods; for example
create table foo (f1 widget(42,'23skidoo',point));
Of course the typmodin function has still got to pack this info into a
non-negative int32 for storage, but it's still a useful improvement in
flexibility, especially considering that you can do nearly anything if you
are willing to keep the info in a side table. We can get away with this
change since we have not yet released a version providing user-definable
typmods. Per discussion.
reassembled in the syslogger before writing to the log file. This prevents
partial messages from being written, which mucks up log rotation, and
messages from different backends being interleaved, which causes garbled
logs. Backport as far as 8.0, where the syslogger was introduced.
Tom Lane and Andrew Dunstan
historically worked in some but not all cases, but as of 8.2 it failed for all
timezone formats. Fix, and add regression test cases to catch future
regressions in this area. Per gripe from Adam Witney.
with a plpgsql-defined cursor. The underlying mechanism for this is that the
main SQL engine will now take "WHERE CURRENT OF $n" where $n is a refcursor
parameter. Not sure if we should document that fact or consider it an
implementation detail. Per discussion with Pavel Stehule.
Along the way, allow FOR UPDATE in non-WITH-HOLD cursors; there may once
have been a reason to disallow that, but it seems to work now, and it's
really rather necessary if you want to select a row via a cursor and then
update it in a concurrent-safe fashion.
Original patch by Arul Shaji, rather heavily editorialized by Tom Lane.
large inputs. Also cause it to error out immediately if the result will
overflow, instead of grinding through a lot of calculation first.
Per gripe from Jim Nasby.
which is the only state in which it's safe to initiate database queries.
It turns out that all but two of the callers thought that's what it meant;
and the other two were using it as a proxy for "will GetTopTransactionId()
return a nonzero XID"? Since it was in fact an unreliable guide to that,
make those two just invoke GetTopTransactionId() always, then deal with a
zero result if they get one.
for each temp file, rather than once per sort or hashjoin; this allows
spreading the data of a large sort or join across multiple tablespaces.
(I remain dubious that this will make any difference in practice, but certain
people insisted.) Arrange to cache the results of parsing the GUC variable
instead of recomputing from scratch on every demand, and push usage of the
cache down to the bottommost fd.c level.
were accepted by prior Postgres releases. This takes care of the loose end
left by the preceding patch to downgrade implicit casts-to-text. To avoid
breaking desirable behavior for array concatenation, introduce a new
polymorphic pseudo-type "anynonarray" --- the added concatenation operators
are actually text || anynonarray and anynonarray || text.
from the other string-category types; this eliminates a lot of surprising
interpretations that the parser could formerly make when there was no directly
applicable operator.
Create a general mechanism that supports casts to and from the standard string
types (text,varchar,bpchar) for *every* datatype, by invoking the datatype's
I/O functions. These new casts are assignment-only in the to-string direction,
explicit-only in the other, and therefore should create no surprising behavior.
Remove a bunch of thereby-obsoleted datatype-specific casting functions.
The "general mechanism" is a new expression node type CoerceViaIO that can
actually convert between *any* two datatypes if their external text
representations are compatible. This is more general than needed for the
immediate feature, but might be useful in plpgsql or other places in future.
This commit does nothing about the issue that applying the concatenation
operator || to non-text types will now fail, often with strange error messages
due to misinterpreting the operator as array concatenation. Since it often
(not always) worked before, we should either make it succeed or at least give
a more user-friendly error; but details are still under debate.
Peter Eisentraut and Tom Lane
a session regardless of the existence of cached plans. The plancache
only needs to be invalidated so that rules affected by the new setting
will be reflected in the new query plans.
Jan
tablespace(s) in which to store temp tables and temporary files. This is a
list to allow spreading the load across multiple tablespaces (a random list
element is chosen each time a temp object is to be created). Temp files are
not stored in per-database pgsql_tmp/ directories anymore, but per-tablespace
directories.
Jaime Casanova and Albert Cervera, with review by Bernd Helmle and Tom Lane.
and most especially for UTF8. Remove unnecessary special cases for bytea
processing and single-byte charset ILIKE. a ILIKE b is now processed as
lower(a) LIKE lower(b) in all cases. The code is now considerably simpler. All
comparisons are now performed byte-wise, and the text and pattern are also
advanced byte-wise where it is safe to do so - essentially where a wildcard is
not being matched.
Andrew Dunstan, from an original patch by ITAGAKI Takahiro, with ideas from
Tom Lane and Mark Mielke.
type. Also, add explicit casts between boolean and text/varchar. Both
of these changes are for conformance with SQL:2003.
Update the regression tests, bump the catversion.
delivering a well-randomized hash value. I got religion on this after
observing that performance of multi-batch hash join degrades terribly if the
higher-order bits of hash values aren't random, as indeed was true for say
hashes of small integer values. It's now expected and documented that hash
functions should use hash_any or some comparable method to ensure that all
bits of their output are about equally random.
initdb forced because this change invalidates existing hash indexes. For the
same reason, this isn't back-patchable; the hash join performance problem
will get a band-aid fix in the back branches.
"microsecond" and "millisecond" units were not considered valid input
by themselves, which caused inputs like "1 millisecond" to be rejected
erroneously.
Update the docs, add regression tests, and backport to 8.2 and 8.1
or abort within a backend; rearrange InitPostgres processing to make it so.
Revealed by just-added Asserts along with ECPG regression tests (hm, I wonder
why the core regression tests didn't expose it?). This possibly is another
reason for missing stats updates ...
and aborted transactions have different effects; also teach it not to assume
that prepared transactions are always committed.
Along the way, simplify the pgstats API by tying counting directly to
Relations; I cannot detect any redeeming social value in having stats
pointers in HeapScanDesc and IndexScanDesc structures. And fix a few
corner cases in which counts might be missed because the relation's
pgstat_info pointer hadn't been set.
what a Var node refers to. This is no longer necessary because the new
flat-range-table representation of plan trees makes it relatively easy to dig
down through child plan levels to find the original reference; and to keep
doing it that way, we'd have to store joinaliasvars lists in flattened RTEs,
as demonstrated by bug report from Leszek Trenkner. This change makes
varnoold/varoattno truly just debug aids, which wasn't quite the case before.
Perhaps we should drop them, or only have them in assert-enabled builds?
is using mark/restore but not rewind or backward-scan capability. Insert a
materialize plan node between a mergejoin and its inner child if the inner
child is a sort that is expected to spill to disk. The materialize shields
the sort from the need to do mark/restore and thereby allows it to perform
its final merge pass on-the-fly; while the materialize itself is normally
cheap since it won't spill to disk unless the number of tuples with equal
key values exceeds work_mem.
Greg Stark, with some kibitzing from Tom Lane.
- Function renamed to "xpath".
- Function is now strict, per discussion.
- Return empty array in case when XPath expression detects nothing
(previously, NULL was returned in such case), per discussion.
- (bugfix) Work with fragments with prologue: select xpath('/a',
'<?xml version="1.0"?><a /><b />'); // now XML datum is always wrapped
with dummy <x>...</x>, XML prologue simply goes away (if any).
- Some cleanup.
Nikolay Samokhvalov
Some code cleanup and documentation work by myself.
and inet_server_addr() fail if the client connected over a "scoped" IPv6
address. In this case getnameinfo() will return a string ending with
a poorly-standardized "%something" zone specifier, which these functions
try to feed to network_in(), which won't take it. So that we don't lose
functionality altogether, suppress the zone specifier before giving the
string to network_in(). Per report from Brian Hirt.
TODO: probably someday the inet type should support scoped IPv6 addresses,
and then this patch should be reverted.
Backpatch to 8.2 ... is it worth going further?
ActiveSnapshot. Having it affect ActiveSnapshot only in the unusual
case of needing to replan seems a bad idea, and there's also the problem
that the created snap might be in a relatively short-lived context, as
noted by Jan Wieck. Also, there's no need to force a new snap at all
unless we are called with no snap currently set, which is an unusual
case in itself.
and views (but not system catalogs, nor sequences or toast tables). Get rid
of the hardwired convention that a type's array type is named exactly "_type",
instead using a new column pg_type.typarray to provide the linkage. (It still
will be named "_type", though, except in odd corner cases such as
maximum-length type names.)
Along the way, make tracking of owner and schema dependencies for types more
uniform: a type directly created by the user has these dependencies, while a
table rowtype or auto-generated array type does not have them, but depends on
its parent object instead.
David Fetter, Andrew Dunstan, Tom Lane
numerics as "oprcanhash", and make the corresponding system catalog
updates. As a result, hash indexes, hashed aggregation, and hash
joins can now be used with the numeric type. Bump the catversion.
The only tricky aspect to doing this is writing a correct hash
function: it's possible for two Numerics to be equal according to
their equality operator, but have different in-memory bit patterns.
To cope with this, the hash function doesn't consider the Numeric's
"scale" or "sign", and explictly skips any leading or trailing
zeros in the Numeric's digit buffer (the current implementation
should suppress any such zeros, but it seems unwise to rely upon
this). See discussion on pgsql-patches for more details.
and for other compilers, insert a dummy exit() call so that they understand
PG_RE_THROW() doesn't return. Insert fflush(stderr) in ExceptionalCondition,
per recent buildfarm evidence that that might not happen automatically on some
platforms. And const-ify ExceptionalCondition's declaration while at it.
need be returned. We keep a heap of the current best N tuples and sift-up
new tuples into it as we scan the input. For M input tuples this means
only about M*log(N) comparisons instead of M*log(M), not to mention a lot
less workspace when N is small --- avoiding spill-to-disk for large M
is actually the most attractive thing about it. Patch includes planner
and executor support for invoking this facility in ORDER BY ... LIMIT
queries. Greg Stark, with some editorialization by moi.
true at the very end of its processing, the update is broadcast via a
shared-cache-inval message for the index; without this, existing backends that
already have relcache entries for the index might never see it become valid.
Also, force a relcache inval on the index's parent table at the same time,
so that any cached plans for that table are re-planned; this ensures that
the newly valid index will be used if appropriate. Aside from making
C.I.C. behave more reasonably, this is necessary infrastructure for some
aspects of the HOT patch. Pavan Deolasee, with a little further stuff from
me.
isn't any place to throw the error to. If so, we should treat the error
as FATAL, just as we would have if it'd been thrown outside the PG_TRY
block to begin with.
Although this is clearly a *potential* source of bugs, it is not clear
at the moment whether it is an *actual* source of bugs; there may not
presently be any PG_TRY blocks in code that can be reached with no outer
longjmp catcher. So for the moment I'm going to be conservative and not
back-patch this. The change breaks ABI for users of PG_RE_THROW and hence
might create compatibility problems for loadable modules, so we should not
put it into released branches without proof that it's needed.
from time_t to TimestampTz representation. This provides full gettimeofday()
resolution of the timestamps, which might be useful when attempting to
do point-in-time recovery --- previously it was not possible to specify
the stop point with sub-second resolution. But mostly this is to get
rid of TimestampTz-to-time_t conversion overhead during commit. Per my
proposal of a day or two back.
messages to the stats collector. This avoids the problem that enabling
stats_row_level for autovacuum has a significant overhead for short
read-only transactions, as noted by Arjen van der Meijden. We can avoid
an extra gettimeofday call by piggybacking on the one done for WAL-logging
xact commit or abort (although that doesn't help read-only transactions,
since they don't WAL-log anything).
In my proposal for this, I noted that we could change the WAL log entries
for commit/abort to record full TimestampTz precision, instead of only
time_t as at present. That's not done in this patch, but will be committed
separately.
look through a freelist for a chunk of adequate size. For a long time
now, all elements of a given freelist have been exactly the same
allocated size, so we don't need a loop. Since the loop never iterated
more than once, you'd think this wouldn't matter much, but it makes a
noticeable savings in a simple test --- perhaps because the compiler
isn't optimizing on a mistaken assumption that the loop would repeat.
AllocSetAlloc is called often enough that saving even a couple of
instructions is worthwhile.
is in progress on the same hashtable. This seems the least invasive way to
fix the recently-recognized problem that a split could cause the scan to
visit entries twice or (with much lower probability) miss them entirely.
The only field-reported problem caused by this is the "failed to re-find
shared lock object" PANIC in COMMIT PREPARED reported by Michel Dorochevsky,
which was caused by multiply visited entries. However, it seems certain
that mdsync() is vulnerable to missing required fsync's due to missed
entries, and I am fearful that RelationCacheInitializePhase2() might be at
risk as well. Because of that and the generalized hazard presented by this
bug, back-patch all the supported branches.
Along the way, fix pg_prepared_statement() and pg_cursor() to not assume
that the hashtables they are examining will stay static between calls.
This is risky regardless of the newly noted dynahash problem, because
hash_seq_search() has never promised to cope with deletion of table entries
other than the just-returned one. There may be no bug here because the only
supported way to call these functions is via ExecMakeTableFunctionResult()
which will cycle them to completion before doing anything very interesting,
but it seems best to get rid of the assumption. This affects 8.2 and HEAD
only, since those functions weren't there earlier.
RESET SESSION, RESET PLANS, and RESET TEMP are now DISCARD ALL,
DISCARD PLANS, and DISCARD TEMP, respectively. This is to avoid
confusion with the pre-existing RESET variants: the DISCARD
commands are not actually similar to RESET. Patch from Marko
Kreen, with some minor editorialization.
(it's so nice to have a buildfarm member that actively rejects naked
uses of strcasecmp). This coding is still pretty awful, though, since
it's going to be O(N^2) in the number of guc variables. May I direct
your attention to bsearch?
are mostly excluded by constraints: do the CE test a bit earlier to save
some adjust_appendrel_attrs() work on excluded children, and arrange to
use array indexing rather than rt_fetch() to fetch RTEs in the main body
of the planner. The latter is something I'd wanted to do for awhile anyway,
but seeing list_nth_cell() as 35% of the runtime gets one's attention.
values: don't throw away perfectly good hash bits, and increase the shift
distances so as to provide more separation in the common case where some of
the key values are small integers (and so their hashes are too, because
hashfunc.c doesn't try all that hard). This reduces the runtime of
SearchCatCache by a factor of 4 in an example provided by Greg Stark,
in which the planner spends a whole lot of time searching the two-key
STATRELATT cache. It seems unlikely to hurt in other cases, but maybe
we could do even better?
processes to be running simultaneously. Also, now autovacuum processes do not
count towards the max_connections limit; they are counted separately from
regular processes, and are limited by the new GUC variable
autovacuum_max_workers.
The launcher now has intelligence to launch workers on each database every
autovacuum_naptime seconds, limited only on the max amount of worker slots
available.
Also, the global worker I/O utilization is limited by the vacuum cost-based
delay feature. Workers are "balanced" so that the total I/O consumption does
not exceed the established limit. This part of the patch was contributed by
ITAGAKI Takahiro.
Per discussion.
a replan. I had originally thought this was not necessary, but the new
SPI facilities create a path whereby queries planned with non-default
options can get into the cache, so it is necessary.
access to the planner's cursor-related planning options, and provide new
FETCH/MOVE routines that allow access to the full power of those commands.
Small refactoring of planner(), pg_plan_query(), and pg_plan_queries()
APIs to make it convenient to pass the planning options down from SPI.
This is the core-code portion of Pavel Stehule's patch for scrollable
cursor support in plpgsql; I'll review and apply the plpgsql changes
separately.
reviewed by Neil Conway. This patch adds the following DDL command
variants: RESET SESSION, RESET TEMP, RESET PLANS, CLOSE ALL, and
DEALLOCATE ALL. RESET SESSION is intended for use by connection
pool software and the like, in order to reset a client session
to something close to its initial state.
Note that while most of these command variants can be executed
inside a transaction block (but are not transaction-aware!),
RESET SESSION cannot. While this is inconsistent, it is intended
to catch programmer mistakes: RESET SESSION in an open transaction
block is probably unintended.
This commit breaks any code that assumes that the mere act of forming a tuple
(without writing it to disk) does not "toast" any fields. While all available
regression tests pass, I'm not totally sure that we've fixed every nook and
cranny, especially in contrib.
Greg Stark with some help from Tom Lane
seen by code inspecting the expression. The best way to do this seems
to be to drop the original representation as a function invocation, and
instead make a special expression node type that represents applying
the element-type coercion function to each array element. In this way
the element function is exposed and will be checked for volatility.
Per report from Guillaume Smet.
reset event, namely invalidate everything. This oversight probably
explains the rare failures that some buildfarm machines have been
showing for the plancache regression test.
pointer" in every Snapshot struct. This allows removal of the case-by-case
tests in HeapTupleSatisfiesVisibility, which should make it a bit faster
(I didn't try any performance tests though). More importantly, we are no
longer violating portable C practices by assuming that small integers are
distinct from all pointer values, and HeapTupleSatisfiesDirty no longer
has a non-reentrant API involving side-effects on a global variable.
There were a couple of places calling HeapTupleSatisfiesXXX routines
directly rather than through the HeapTupleSatisfiesVisibility macro.
Since these places had to be changed anyway, I chose to make them go
through the macro for uniformity.
Along the way I renamed HeapTupleSatisfiesSnapshot to HeapTupleSatisfiesMVCC
to emphasize that it's only used with MVCC-type snapshots. I was sorely
tempted to rename HeapTupleSatisfiesVisibility to HeapTupleSatisfiesSnapshot,
but forebore for the moment to avoid confusion and reduce the likelihood that
this patch breaks some of the pending patches. Might want to reconsider
doing that later.
search_path that was active when the plan was first made. To do this,
improve namespace.c to support a stack of "override" search path settings
(we must have a stack since nested replan events are entirely possible).
This facility replaces the "special namespace" hack formerly used by
CREATE SCHEMA, and should be able to support per-function search path
settings as well.
First, genericcostestimate() was being way too liberal about including
partial-index conditions in its selectivity estimate, resulting in
substantial underestimates for situations such as an indexqual "x = 42"
used with an index on x "WHERE x >= 40 AND x < 50". While the code is
intentionally set up to favor selecting partial indexes when available,
this was too much...
Second, choose_bitmap_and() was likewise easily fooled by cases of this
type, since it would similarly think that the partial index had selectivity
independent of the indexqual.
Fixed by using predicate_implied_by() rather than simple equality checks
to determine redundancy. This is a good deal more expensive but I don't
see much alternative. At least the extra cost is only paid when there's
actually a partial index under consideration.
Per report from Jeff Davis. I'm not going to risk back-patching this,
though.
and regexp_split_to_table. These functions provide access to the
capture groups resulting from a POSIX regular expression match,
and provide the ability to split a string on a POSIX regular
expression, respectively. Patch from Jeremy Drake; code review by
Neil Conway, additional comments and suggestions from Tom and
Peter E.
This patch bumps the catversion, adds some regression tests,
and updates the docs.
rules to be defined with different, per session controllable, behaviors
for replication purposes.
This will allow replication systems like Slony-I and, as has been stated
on pgsql-hackers, other products to control the firing mechanism of
triggers and rewrite rules without modifying the system catalog directly.
The firing mechanisms are controlled by a new superuser-only GUC
variable, session_replication_role, together with a change to
pg_trigger.tgenabled and a new column pg_rewrite.ev_enabled. Both
columns are a single char data type now (tgenabled was a bool before).
The possible values in these attributes are:
'O' - Trigger/Rule fires when session_replication_role is "origin"
(default) or "local". This is the default behavior.
'D' - Trigger/Rule is disabled and fires never
'A' - Trigger/Rule fires always regardless of the setting of
session_replication_role
'R' - Trigger/Rule fires when session_replication_role is "replica"
The GUC variable can only be changed as long as the system does not have
any cached query plans. This will prevent changing the session role and
accidentally executing stored procedures or functions that have plans
cached that expand to the wrong query set due to differences in the rule
firing semantics.
The SQL syntax for changing a triggers/rules firing semantics is
ALTER TABLE <tabname> <when> TRIGGER|RULE <name>;
<when> ::= ENABLE | ENABLE ALWAYS | ENABLE REPLICA | DISABLE
psql's \d command as well as pg_dump are extended in a backward
compatible fashion.
Jan
