This adds combine, serial and deserial functions for the array_agg() and
string_agg() aggregate functions, thus allowing these aggregates to
partake in partial aggregations. This allows both parallel aggregation to
take place when these aggregates are present and also allows additional
partition-wise aggregation plan shapes to include plans that require
additional aggregation once the partially aggregated results from the
partitions have been combined.
Author: David Rowley
Reviewed-by: Andres Freund, Tomas Vondra, Stephen Frost, Tom Lane
Discussion: https://postgr.es/m/CAKJS1f9sx_6GTcvd6TMuZnNtCh0VhBzhX6FZqw17TgVFH-ga_A@mail.gmail.com
This will ease a follow-up move that will generate automatically this
code. The C file is renamed, for consistency with the node-related
files whose code are generated by gen_node_support.pl:
- queryjumble.c -> queryjumblefuncs.c
- utils/queryjumble.h -> nodes/queryjumble.h
Per a suggestion from Peter Eisentraut.
Reviewed-by: Peter Eisentraut
Discussion: https://postgr.es/m/Y5BHOUhX3zTH/ig6@paquier.xyz
Currently, for large transactions, the publisher sends the data in
multiple streams (changes divided into chunks depending upon
logical_decoding_work_mem), and then on the subscriber-side, the apply
worker writes the changes into temporary files and once it receives the
commit, it reads from those files and applies the entire transaction. To
improve the performance of such transactions, we can instead allow them to
be applied via parallel workers.
In this approach, we assign a new parallel apply worker (if available) as
soon as the xact's first stream is received and the leader apply worker
will send changes to this new worker via shared memory. The parallel apply
worker will directly apply the change instead of writing it to temporary
files. However, if the leader apply worker times out while attempting to
send a message to the parallel apply worker, it will switch to
"partial serialize" mode - in this mode, the leader serializes all
remaining changes to a file and notifies the parallel apply workers to
read and apply them at the end of the transaction. We use a non-blocking
way to send the messages from the leader apply worker to the parallel
apply to avoid deadlocks. We keep this parallel apply assigned till the
transaction commit is received and also wait for the worker to finish at
commit. This preserves commit ordering and avoid writing to and reading
from files in most cases. We still need to spill if there is no worker
available.
This patch also extends the SUBSCRIPTION 'streaming' parameter so that the
user can control whether to apply the streaming transaction in a parallel
apply worker or spill the change to disk. The user can set the streaming
parameter to 'on/off', or 'parallel'. The parameter value 'parallel' means
the streaming will be applied via a parallel apply worker, if available.
The parameter value 'on' means the streaming transaction will be spilled
to disk. The default value is 'off' (same as current behaviour).
In addition, the patch extends the logical replication STREAM_ABORT
message so that abort_lsn and abort_time can also be sent which can be
used to update the replication origin in parallel apply worker when the
streaming transaction is aborted. Because this message extension is needed
to support parallel streaming, parallel streaming is not supported for
publications on servers < PG16.
Author: Hou Zhijie, Wang wei, Amit Kapila with design inputs from Sawada Masahiko
Reviewed-by: Sawada Masahiko, Peter Smith, Dilip Kumar, Shi yu, Kuroda Hayato, Shveta Mallik
Discussion: https://postgr.es/m/CAA4eK1+wyN6zpaHUkCLorEWNx75MG0xhMwcFhvjqm2KURZEAGw@mail.gmail.com
This is not really complete, but it catches most cases of practical
interest. The main omissions are:
* regtype, regprocedure, and regoperator parse type names by
calling the main grammar, so any grammar-detected syntax error
will still be a hard error. Also, if one includes a type
modifier in such a type specification, errors detected by the
typmodin function will be hard errors.
* Lookup errors are handled just by passing missing_ok = true
to the relevant catalog lookup function. Because we've used
quite a restrictive definition of "missing_ok", this means that
edge cases such as "the named schema exists, but you lack
USAGE permission on it" are still hard errors.
It would make sense to me to replace most/all missing_ok
parameters with an escontext parameter and then allow these
additional lookup failure cases to be trapped too. But that's
a job for some other day.
Discussion: https://postgr.es/m/3342239.1671988406@sss.pgh.pa.us
Historically these input functions just called strtoul or strtoull
and returned the result, with no error detection whatever. Upgrade
them to reject garbage input and out-of-range values, similarly to
our other numeric input routines.
To share the code for this with type oid, adjust the existing
"oidin_subr" to be agnostic about the SQL name of the type it is
handling, and move it to numutils.c; then clone it for 64-bit types.
Because the xid types previously accepted hex and octal input by
reason of calling strtoul[l] with third argument zero, I made the
common subroutine do that too, with the consequence that type oid
now also accepts hex and octal input. In view of 6fcda9aba, that
seems like a good thing.
While at it, simplify the existing over-complicated handling of
syntax errors from strtoul: we only need one ereturn not three.
Discussion: https://postgr.es/m/3526121.1672000729@sss.pgh.pa.us
This introduces palloc_aligned() and MemoryContextAllocAligned() which
allow callers to obtain memory which is allocated to the given size and
also aligned to the specified alignment boundary. The alignment
boundaries may be any power-of-2 value. Currently, the alignment is
capped at 2^26, however, we don't expect values anything like that large.
The primary expected use case is to align allocations to perhaps CPU
cache line size or to maybe I/O page size. Certain use cases can benefit
from having aligned memory by either having better performance or more
predictable performance.
The alignment is achieved by requesting 'alignto' additional bytes from
the underlying allocator function and then aligning the address that is
returned to the requested alignment. This obviously does waste some
memory, so alignments should be kept as small as what is required.
It's also important to note that these alignment bytes eat into the
maximum allocation size. So something like:
palloc_aligned(MaxAllocSize, 64, 0);
will not work as we cannot request MaxAllocSize + 64 bytes.
Additionally, because we're just requesting the requested size plus the
alignment requirements from the given MemoryContext, if that context is
the Slab allocator, then since slab can only provide chunks of the size
that's specified when the slab context is created, then this is not going
to work. Slab will generate an error to indicate that the requested size
is not supported.
The alignment that is requested in palloc_aligned() is stored along with
the allocated memory. This allows the alignment to remain intact through
repalloc() calls.
Author: Andres Freund, David Rowley
Reviewed-by: Maxim Orlov, Andres Freund, John Naylor
Discussion: https://postgr.es/m/CAApHDvpxLPUMV1mhxs6g7GNwCP6Cs6hfnYQL5ffJQTuFAuxt8A%40mail.gmail.com
This is the guts of float4in, callable as a routine to input floats,
which will be useful in an upcoming patch for allowing soft errors in
the seg module's input function.
A similar operation was performed some years ago for float8in in
commit 50861cd683.
Reviewed by Tom Lane
Discussion: https://postgr.es/m/cee4e426-d014-c0b7-aa22-a659f2cd9130@dunslane.net
A new function pg_stat_get_backend_subxact() can be used to get
information about the number of subtransactions in the cache of
a particular backend and whether that cache has overflowed. This
can be useful for tracking down performance problems that can
result from overflowed snapshots.
Dilip Kumar, reviewed by Zhihong Yu, Nikolay Samokhvalov,
Justin Pryzby, Nathan Bossart, Ashutosh Sharma, Julien
Rouhaud. Additional design comments from Andres Freund,
Tom Lane, Bruce Momjian, and David G. Johnston.
Discussion: http://postgr.es/m/CAFiTN-ut0uwkRJDQJeDPXpVyTWD46m3gt3JDToE02hTfONEN=Q@mail.gmail.com
This is mostly straightforward, except that if the range type
has a canonical function, that might throw an error during range
input. (Such errors probably only occur for edge cases: in the
in-core canonical functions, it happens only if a bound has the
maximum valid value for the underlying type.) Hence, this patch
extends the soft-error regime to allow canonical functions to
return errors softly as well. Extensions implementing range
canonical functions will need modification anyway because of the
API change for range_serialize(); while at it, they might want
to do something similar to what's been done here in the in-core
canonical functions.
Discussion: https://postgr.es/m/3284599.1671075185@sss.pgh.pa.us
This requires a bit of further infrastructure-extension to allow
trapping errors reported by numeric_in and pg_unicode_to_server,
but otherwise it's pretty straightforward.
In the case of jsonb_in, we are only capturing errors reported
during the initial "parse" phase. The value-construction phase
(JsonbValueToJsonb) can also throw errors if assorted implementation
limits are exceeded. We should improve that, but it seems like a
separable project.
Andrew Dunstan and Tom Lane
Discussion: https://postgr.es/m/3bac9841-fe07-713d-fa42-606c225567d6@dunslane.net
Replace the error trapping scheme introduced in 5bc450629 with our
shiny new errsave/ereturn mechanism. This doesn't have any real
functional impact (although I think that the new coding is able
to report a few more errors softly than v15 did). And I doubt
there's any measurable performance difference either. But this
gets rid of an ad-hoc, one-of-a-kind design in favor of a mechanism
that will be widely used going forward, so it should be a net win
for code readability.
Discussion: https://postgr.es/m/3bbbb0df-7382-bf87-9737-340ba096e034@postgrespro.ru
This patch converts the input functions for date, time, timetz,
timestamp, timestamptz, and interval to the new soft-error style.
There's some related stuff in formatting.c that remains to be
cleaned up, but that seems like a separable project.
Discussion: https://postgr.es/m/3bbbb0df-7382-bf87-9737-340ba096e034@postgrespro.ru
Pay down some ancient technical debt (dating to commit 022fd9966):
fix a couple of places in datetime parsing that were throwing
ereport's immediately instead of returning a DTERR code that could be
interpreted by DateTimeParseError. The reason for that was that there
was no mechanism for passing any auxiliary data (such as a zone name)
to DateTimeParseError, and these errors seemed to really need it.
Up to now it didn't matter that much just where the error got thrown,
but now we'd like to have a hard policy that datetime parse errors
get thrown from just the one place.
Hence, invent a "DateTimeErrorExtra" struct that can be used to
carry any extra values needed for specific DTERR codes. Perhaps
in the future somebody will be motivated to use this to improve
the specificity of other DateTimeParseError messages, but for now
just deal with the timezone-error cases.
This is on the way to making the datetime input functions report
parse errors softly; but it's really an independent change, so
commit separately.
Discussion: https://postgr.es/m/3bbbb0df-7382-bf87-9737-340ba096e034@postgrespro.ru
More could be done in this line, but I just grabbed some low-hanging
fruit. Principal objective was to remove the need for several ugly
unconstify() usages in formatting.c.
This patch converts the input functions for bool, int2, int4, int8,
float4, float8, numeric, and contrib/cube to the new soft-error style.
array_in and record_in are also converted. There's lots more to do,
but this is enough to provide proof-of-concept that the soft-error
API is usable, as well as reference examples for how to convert
input functions.
This patch is mostly by me, but it owes very substantial debt to
earlier work by Nikita Glukhov, Andrew Dunstan, and Amul Sul.
Thanks to Andres Freund for review.
Discussion: https://postgr.es/m/3bbbb0df-7382-bf87-9737-340ba096e034@postgrespro.ru
Postgres' standard mechanism for reporting errors (ereport() or elog())
is used for all sorts of error conditions. This means that throwing
an exception via ereport(ERROR) requires an expensive transaction or
subtransaction abort and cleanup, since the exception catcher dare not
make many assumptions about what has gone wrong. There are situations
where we would rather have a lighter-weight mechanism for dealing
with errors that are known to be safe to recover from without a full
transaction cleanup. This commit creates infrastructure to let us
adapt existing error-reporting code for that purpose. See the
included documentation changes for details. Follow-on commits will
provide test code and usage examples.
The near-term plan is to convert most if not all datatype input
functions to report invalid input "softly". This will enable
implementing some SQL/JSON features cleanly and without the cost
of subtransactions, and it will also allow creating COPY options
to deal with bad input without cancelling the whole COPY.
This patch is mostly by me, but it owes very substantial debt to
earlier work by Nikita Glukhov, Andrew Dunstan, and Amul Sul.
Thanks also to Andres Freund for review.
Discussion: https://postgr.es/m/3bbbb0df-7382-bf87-9737-340ba096e034@postgrespro.ru
The USER SET flag specifies that the variable should be set on behalf of an
ordinary role. That lets ordinary roles set placeholder variables, which
permission requirements are not known yet. Such a value wouldn't be used if
the variable finally appear to require superuser privileges.
The new flags are stored in the pg_db_role_setting.setuser array. Catversion
is bumped.
This commit is inspired by the previous work by Steve Chavez.
Discussion: https://postgr.es/m/CAPpHfdsLd6E--epnGqXENqLP6dLwuNZrPMcNYb3wJ87WR7UBOQ%40mail.gmail.com
Author: Alexander Korotkov, Steve Chavez
Reviewed-by: Pavel Borisov, Steve Chavez
Currently a table can only be vacuumed or analyzed by its owner or
a superuser. This can now be extended to any user by means of an
appropriate GRANT.
Nathan Bossart
Reviewed by: Bharath Rupireddy, Kyotaro Horiguchi, Stephen Frost, Robert
Haas, Mark Dilger, Tom Lane, Corey Huinker, David G. Johnston, Michael
Paquier.
Discussion: https://postgr.es/m/20220722203735.GB3996698@nathanxps13
The code has been assuming already in a few places that the initial
recursion nesting depth is 0, and the recent changes in hba.c (mainly
783e8c6) have relies on this assumption in more places. The maximum
recursion nesting level is assumed to be 10 for hba.c and GUCs.
Author: Julien Rouhaud
Discussion: https://postgr.es/m/20221124090724.n7amf5kpdhx6vb76@jrouhaud
We're running out of bits for new permissions. This change doubles the
number of permissions we can accomodate from 16 to 32, so the
forthcoming new ones for vacuum/analyze don't exhaust the pool.
Nathan Bossart
Reviewed by: Bharath Rupireddy, Kyotaro Horiguchi, Stephen Frost, Robert
Haas, Mark Dilger, Tom Lane, Corey Huinker, David G. Johnston, Michael
Paquier.
Discussion: https://postgr.es/m/20220722203735.GB3996698@nathanxps13
The lwlock wait queue scalability issue fixed in a4adc31f69 was quite hard to
find because of the exponential backoff and because we adjust spins_per_delay
over time within a backend.
To make it easier to find similar issues in the future, add a wait event for
the pg_usleep() in perform_spin_delay(). Showing a wait event while spinning
without sleeping would increase the overhead of spinlocks, which we do not
want.
We may at some later point want to have more granular wait events, but that'd
be a substantial amount of work. This provides at least some insights into
something currently hard to observe.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Alexander Korotkov <aekorotkov@gmail.com>
https://postgr.es/m/20221120204310.xywrhyxyytsajuuq@awork3.anarazel.de
This switch impacts 9 patterns related to a SQL-mandated special syntax
for function calls:
- LOCALTIME [ ( typmod ) ]
- LOCALTIMESTAMP [ ( typmod ) ]
- CURRENT_TIME [ ( typmod ) ]
- CURRENT_TIMESTAMP [ ( typmod ) ]
- CURRENT_DATE
Five new entries are added to pg_proc to compensate the removal of
SQLValueFunction to provide backward-compatibility and making this
change transparent for the end-user (for example for the attribute
generated when a keyword is specified in a SELECT or in a FROM clause
without an alias, or when specifying something else than an Iconst to
the parser).
The parser included a set of checks coming from the files in charge of
holding the C functions used for the SQLValueFunction calls (as of
transformSQLValueFunction()), which are now moved within each function's
execution path, so this reduces the dependencies between the execution
and the parsing steps. As of this change, all the SQL keywords use the
same paths for their work, relying only on COERCE_SQL_SYNTAX. Like
fb32748, no performance difference has been noticed, while the perf
profiles get reduced with ExecEvalSQLValueFunction() gone.
Bump catalog version.
Reviewed-by: Corey Huinker, Ted Yu
Discussion: https://postgr.es/m/YzaG3MoryCguUOym@paquier.xyz
Similar to how the INHERIT option controls whether or not the
permissions of the granted role are automatically available to the
grantee, the new SET permission controls whether or not the grantee
may use the SET ROLE command to assume the privileges of the granted
role.
In addition, the new SET permission controls whether or not it
is possible to transfer ownership of objects to the target role
or to create new objects owned by the target role using commands
such as CREATE DATABASE .. OWNER. We could alternatively have made
this controlled by the INHERIT option, or allow it when either
option is given. An advantage of this approach is that if you
are granted a predefined role with INHERIT TRUE, SET FALSE, you
can't go and create objects owned by that role.
The underlying theory here is that the ability to create objects
as a target role is not a privilege per se, and thus does not
depend on whether you inherit the target role's privileges. However,
it's surely something you could do anyway if you could SET ROLE
to the target role, and thus making it contingent on whether you
have that ability is reasonable.
Design review by Nathan Bossat, Wolfgang Walther, Jeff Davis,
Peter Eisentraut, and Stephen Frost.
Discussion: http://postgr.es/m/CA+Tgmob+zDSRS6JXYrgq0NWdzCXuTNzT5eK54Dn2hhgt17nm8A@mail.gmail.com
Instead of dozens of mostly-duplicate pg_foo_aclcheck() functions,
write one common function object_aclcheck() that can handle almost all
of them. We already have all the information we need, such as which
system catalog corresponds to which catalog table and which column is
the ACL column.
There are a few pg_foo_aclcheck() that don't work via the generic
function and have special APIs, so those stay as is.
I also changed most pg_foo_aclmask() functions to static functions,
since they are not used outside of aclchk.c.
Reviewed-by: Corey Huinker <corey.huinker@gmail.com>
Reviewed-by: Antonin Houska <ah@cybertec.at>
Discussion: https://www.postgresql.org/message-id/flat/95c30f96-4060-2f48-98b5-a4392d3b6066@enterprisedb.com
Instead of dozens of mostly-duplicate pg_foo_ownercheck() functions,
write one common function object_ownercheck() that can handle almost
all of them. We already have all the information we need, such as
which system catalog corresponds to which catalog table and which
column is the owner column.
Reviewed-by: Corey Huinker <corey.huinker@gmail.com>
Reviewed-by: Antonin Houska <ah@cybertec.at>
Discussion: https://www.postgresql.org/message-id/flat/95c30f96-4060-2f48-98b5-a4392d3b6066@enterprisedb.com
The code in charge of listing and classifying a set of configuration
files in a directory was located in guc-file.l, being used currently for
GUCs under "include_dir". This code is planned to be used for an
upcoming feature able to include configuration files for ident and HBA
files from a directory, similarly to GUCs. In both cases, the file
names, suffixed by ".conf", have to be ordered alphabetically. This
logic is moved to a new file, called conffiles.c, so as it is easier to
share this facility between GUCs and the HBA/ident parsing logic.
Author: Julien Rouhaud, Michael Paquier
Discussion: https://postgr.es/m/Y2IgaH5YzIq2b+iR@paquier.xyz
We have various requirements when using a dlist_head to keep track of the
number of items in the list. This, traditionally, has been done by
maintaining a counter variable in the calling code. Here we tidy this up
by adding "dclist", which is very similar to dlist but also keeps track of
the number of items stored in the list.
Callers may use the new dclist_count() function when they need to know how
many items are stored. Obtaining the count is an O(1) operation.
For simplicity reasons, dclist and dlist both use dlist_node as their node
type and dlist_iter/dlist_mutable_iter as their iterator type. dclists
have all of the same functionality as dlists except there is no function
named dclist_delete(). To remove an item from a list dclist_delete_from()
must be used. This requires knowing which dclist the given item is stored
in.
Additionally, here we also convert some dlists where additional code
exists to keep track of the number of items stored and to make these use
dclists instead.
Author: David Rowley
Reviewed-by: Bharath Rupireddy, Aleksander Alekseev
Discussion: https://postgr.es/m/CAApHDvrtVxr+FXEX0VbViCFKDGxA3tWDgw9oFewNXCJMmwLjLg@mail.gmail.com
This is similar to 7d25958, and this commit takes care of all the
remaining inconsistencies between the initial value used in the C
variable associated to a GUC and its default value stored in the GUC
tables (as of pg_settings.boot_val).
Some of the initial values of the GUCs updated rely on a compile-time
default. These are refactored so as the GUC table and its C declaration
use the same values. This makes everything consistent with other
places, backend_flush_after, bgwriter_flush_after, port,
checkpoint_flush_after doing so already, for example.
Extracted from a larger patch by Peter Smith. The spots updated in the
modules are from me.
Author: Peter Smith, Michael Paquier
Reviewed-by: Nathan Bossart, Tom Lane, Justin Pryzby
Discussion: https://postgr.es/m/CAHut+PtHE0XSfjjRQ6D4v7+dqzCw=d+1a64ujra4EX8aoc_Z+w@mail.gmail.com
Here we add a new 'copy' parameter to tuplesort_getdatum so that we can
instruct the function not to datumCopy() byref Datums before returning.
Similar to 91e9e89dc, this can provide significant performance
improvements in nodeSort when sorting by a single byref column and the
sort's targetlist contains only that column.
This allows us to re-enable Datum sorts for byref types which was disabled
in 3a5817695 due to a reported memory leak.
Additionally, here we slightly optimize DISTINCT aggregates so that we no
longer perform any datumCopy() when we find the current value not to be
distinct from the previous value. Previously the code would always take a
copy of the most recent Datum and pfree the previous value, even when the
values were the same. Testing shows a small but noticeable performance
increase when aggregate transitions are skipped due to the current
transition value being the same as the prior one.
Author: David Rowley
Discussion: https://postgr.es/m/CAApHDvqS6wC5U==k9Hd26E4EQXH3QR67-T4=Q1rQ36NGvjfVSg@mail.gmail.com
Discussion: https://postgr.es/m/CAApHDvqHonfe9G1cVaKeHbDx70R_zCrM3qP2AGXpGrieSKGnhA@mail.gmail.com
The previous patch made addition of new GUCs cheap, but other GUC
operations aren't improved and indeed get a bit slower, because
hash_seq_search() is slower than just scanning a pointer array.
However, most performance-critical GUC operations only need
to touch a relatively small fraction of the GUCs; especially
so for AtEOXact_GUC(). We can improve matters at the cost
of a bit more space by adding dlist or slist links to the
GUC data structures. This patch invents lists that track
(1) all GUCs with non-default "source";
(2) all GUCs with nonempty state stack (implying they've
been changed in the current transaction);
(3) all GUCs due for reporting to the client.
All of guc.c's performance-critical cases can make use of one or
another of these lists to avoid searching the whole hash table.
In particular, the stack list means that transaction end
doesn't take time proportional to the number of GUCs, but
only to the number changed in the current transaction.
Discussion: https://postgr.es/m/2982579.1662416866@sss.pgh.pa.us
This gets rid of bsearch() in favor of hashed lookup. The main
advantage is that it becomes far cheaper to add new GUCs, since
we needn't re-sort the pointer array. Adding N new GUCs had
been O(N^2 log N), but now it's closer to O(N). We need to
sort only in SHOW ALL and equivalent functions, which are
hopefully not performance-critical to anybody.
Also, merge GetNumConfigOptions() into get_guc_variables(),
because in a world where the set of GUCs isn't fairly static
you really want to consider those two results as tied together
not independent.
Discussion: https://postgr.es/m/2982579.1662416866@sss.pgh.pa.us
The only real argument for using malloc directly was that we needed
the ability to not throw error on OOM; but mcxt.c grew that feature
awhile ago.
Keeping the data in a memory context improves accountability and
debuggability --- for example, without this it's almost impossible
to detect memory leaks in the GUC code with anything less costly
than valgrind. Moreover, the next patch in this series will add a
hash table for GUC lookup, and it'd be pretty silly to be using
palloc-dependent hash facilities alongside malloc'd storage of the
underlying data.
This is a bit invasive though, in particular causing an API break
for GUC check hooks that want to modify the GUC's value or use an
"extra" data structure. They must now use guc_malloc() and
guc_free() instead of malloc() and free(). Failure to change
affected code will result in assertion failures or worse; but
thanks to recent effort in the mcxt infrastructure, it shouldn't
be too hard to diagnose such oversights (at least in assert-enabled
builds).
One note is that this changes ParseLongOption() to return short-lived
palloc'd not malloc'd data. There wasn't any caller for which the
previous definition was better.
Discussion: https://postgr.es/m/2982579.1662416866@sss.pgh.pa.us
We lack a version of repalloc() that supports MCXT_ALLOC_NO_OOM
semantics, so invent repalloc_extended() with the usual set of
flags. repalloc_huge() becomes a legacy wrapper for that.
Also, fix dynahash.c so that it can support HASH_ENTER_NULL
requests when using the default palloc-based allocator.
The only reason it didn't do that already was the lack of the
MCXT_ALLOC_NO_OOM option when that code was written, ages ago.
While here, simplify a few overcomplicated tests in mcxt.c.
Discussion: https://postgr.es/m/2982579.1662416866@sss.pgh.pa.us
Previously PgStat_StatReplSlotEntry contained the slotname, which was mainly
used when writing out the stats during shutdown, to identify the slot in the
serialized data (at runtime the index in ReplicationSlotCtl->replication_slots
is used, but that can change during a restart). Unfortunately the slotname was
overwritten when the slot's stats were reset.
That turned out to only cause "real" problems if the slot was active during
the reset, triggering an assertion failure at the next
pgstat_report_replslot(). In other paths the stats were re-initialized during
pgstat_acquire_replslot().
Fix this by removing slotname from PgStat_StatReplSlotEntry. Instead we can
get the slot's name from the slot itself. Besides fixing a bug, this also is
architecturally cleaner (a name is not really statistics). This is safe
because stats, for a slot removed while shut down, will not be restored at
startup.
In 15 the slotname is not removed, but renamed, to avoid changing the stats
format. In master, bump PGSTAT_FILE_FORMAT_ID.
This commit does not contain a test for the fix. I think this can only be
tested by a tap test starting pg_recvlogical in the background and checking
pg_recvlogical's output. That type of test is notoriously hard to be reliable,
so committing it shortly before the release is wrapped seems like a bad idea.
Reported-by: Jaime Casanova <jcasanov@systemguards.com.ec>
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/YxfagaTXUNa9ggLb@ahch-to
Backpatch: 15-, where the bug was introduced in 5891c7a8ed
Commit c6e0fe1f2 was a shade too trusting that any pointer passed
to pfree, repalloc, etc will point at a valid chunk. Notably,
passing a pointer that was actually obtained from malloc tended
to result in obscure assertion failures, if not worse. (On FreeBSD
I've seen such mistakes take down the entire cluster, seemingly as
a result of clobbering shared memory.)
To improve matters, extend the mcxt_methods[] array so that it
has entries for every possible MemoryContextMethodID bit-pattern,
with the currently unassigned ID codes pointing to error-reporting
functions. Then, fiddle with the ID assignments so that patterns
likely to be associated with bad pointers aren't valid ID codes.
In particular, we should avoid assigning bit patterns 000 (zeroed
memory) and 111 (wipe_mem'd memory).
It turns out that on glibc (Linux), malloc uses chunk headers that
have flag bits in the same place we keep MemoryContextMethodID,
and that the bit patterns 000, 001, 010 are the only ones we'll
see as long as the backend isn't threaded. So we can have very
robust detection of pfree'ing a malloc-assigned block on that
platform, at least so long as we can refrain from using up those
ID codes. On other platforms, we don't have such a good guarantee,
but keeping 000 reserved will be enough to catch many such cases.
While here, make GetMemoryChunkMethodID() local to mcxt.c, as there
seems no need for it to be exposed even in memutils_internal.h.
Patch by me, with suggestions from Andres Freund and David Rowley.
Discussion: https://postgr.es/m/2910981.1665080361@sss.pgh.pa.us
MemoryContextContains is no longer reliable in the wake of c6e0fe1f2,
because there's no longer very much redundancy in chunk headers.
(It wasn't *completely* reliable even before that, as there was a
chance of a false positive if you passed it something that didn't
point to an mcxt chunk at all. But it was generally good enough.)
Hence, remove it. There is no remaining core code that requires it.
Extensions that have been using it might be able to substitute a
test like "GetMemoryChunkContext(ptr) == context", recognizing that
this explicitly requires that the pointer point to some chunk.
Tom Lane and David Rowley
Discussion: https://postgr.es/m/1913788.1664898906@sss.pgh.pa.us
This optional parameter can be specified in cases where there are nested
PG_TRY() statements within a function in order to stop the compiler from
issuing warnings about shadowed local variables when compiling with
-Wshadow. The optional parameter is used as a suffix on the variable
names declared within the PG_TRY(), PG_CATCH(), PG_FINALLY() and
PG_END_TRY() macros. The parameter, if specified, must be the same in
each component macro of the given PG_TRY() block.
This also adjusts the single case where we have nested PG_TRY() statements
to add a parameter to the inner-most PG_TRY().
This reduces the number of compiler warnings when compiling with
-Wshadow=compatible-local from 5 down to 1.
Author: David Rowley
Discussion: https://postgr.es/m/CAApHDvqWGMdB_pATeUqE=JCtNqNxObPOJ00jFEa2_sZ20j_Wvg@mail.gmail.com
This reverts commit db0d67db24 and
several follow-on fixes. The idea of making a cost-based choice
of the order of the sorting columns is not fundamentally unsound,
but it requires cost information and data statistics that we don't
really have. For example, relying on procost to distinguish the
relative costs of different sort comparators is pretty pointless
so long as most such comparator functions are labeled with cost 1.0.
Moreover, estimating the number of comparisons done by Quicksort
requires more than just an estimate of the number of distinct values
in the input: you also need some idea of the sizes of the larger
groups, if you want an estimate that's good to better than a factor of
three or so. That's data that's often unknown or not very reliable.
Worse, to arrive at estimates of the number of calls made to the
lower-order-column comparison functions, the code needs to make
estimates of the numbers of distinct values of multiple columns,
which are necessarily even less trustworthy than per-column stats.
Even if all the inputs are perfectly reliable, the cost algorithm
as-implemented cannot offer useful information about how to order
sorting columns beyond the point at which the average group size
is estimated to drop to 1.
Close inspection of the code added by db0d67db2 shows that there
are also multiple small bugs. These could have been fixed, but
there's not much point if we don't trust the estimates to be
accurate in-principle.
Finally, the changes in cost_sort's behavior made for very large
changes (often a factor of 2 or so) in the cost estimates for all
sorting operations, not only those for multi-column GROUP BY.
That naturally changes plan choices in many situations, and there's
precious little evidence to show that the changes are for the better.
Given the above doubts about whether the new estimates are really
trustworthy, it's hard to summon much confidence that these changes
are better on the average.
Since we're hard up against the release deadline for v15, let's
revert these changes for now. We can always try again later.
Note: in v15, I left T_PathKeyInfo in place in nodes.h even though
it's unreferenced. Removing it would be an ABI break, and it seems
a bit late in the release cycle for that.
Discussion: https://postgr.es/m/TYAPR01MB586665EB5FB2C3807E893941F5579@TYAPR01MB5866.jpnprd01.prod.outlook.com
Up to now, the ID values returned by pg_stat_get_backend_idset() and
used by pg_stat_get_backend_activity() and allied functions were just
indexes into a local array of sessions seen by the last stats refresh.
This is problematic for a few reasons. The "ID" of a session can vary
over its existence, which is surprising. Also, while these numbers
often match the "backend ID" used for purposes like temp schema
assignment, that isn't reliably true. We can fairly cheaply switch
things around to make these numbers actually be the sessions' backend
IDs. The added test case illustrates that with this definition, the
temp schema used by a given session can be obtained given its PID.
While here, delete some dead code that guarded against getting
a NULL return from pgstat_fetch_stat_local_beentry(). That can't
happen as long as the caller is careful to pass an in-range array
index, as all the callers are. (This code may not have been dead
when written, but it surely is now.)
Nathan Bossart
Discussion: https://postgr.es/m/20220815205811.GA250990@nathanxps13
The previous macro implementations just cast the argument to a target
type but did not check whether the input type was appropriate. The
function implementation can do better type checking of the input type.
For the *GetDatumFast() macros, converting to an inline function
doesn't work in the !USE_FLOAT8_BYVAL case, but we can use
AssertVariableIsOfTypeMacro() to get a similar level of type checking.
Reviewed-by: Aleksander Alekseev <aleksander@timescale.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/8528fb7e-0aa2-6b54-85fb-0c0886dbd6ed%40enterprisedb.com
Previously, these were declared in postgres_ext.h, but they are not
needed nearly so widely as the OID declarations, so that doesn't
necessarily make sense. Also, because postgres_ext.h is included
before most of c.h has been processed, the previous location creates
some problems for a pending patch.
Patch by me, reviewed by Dilip Kumar.
Discussion: http://postgr.es/m/CA+TgmoYc8oevMqRokZQ4y_6aRn-7XQny1JBr5DyWR_jiFtONHw@mail.gmail.com
Push the units fields over to the left so that all the single-bit
flags can be together. I considered rearranging the single-bit
flags to try to group flags with similar purposes, but eventually
decided that that involved too many judgment calls.
Discussion: https://postgr.es/m/17385-9ee529fb091f0ce5@postgresql.org
Previously, the transaction-property GUCs such as transaction_isolation
could be reset after starting a transaction, because we marked them
as GUC_NO_RESET_ALL but still allowed a targeted RESET. That leads to
assertion failures or worse, because those properties aren't supposed
to change after we've acquired a transaction snapshot.
There are some NO_RESET_ALL variables for which RESET is okay, so
we can't just redefine the semantics of that flag. Instead introduce
a separate GUC_NO_RESET flag. Mark "seed", as well as the transaction
property GUCs, as GUC_NO_RESET.
We have to disallow GUC_ACTION_SAVE as well as straight RESET, because
otherwise a function having a "SET transaction_isolation" clause can
still break things: the end-of-function restore action is equivalent
to a RESET.
No back-patch, as it's conceivable that someone is doing something
this patch will forbid (like resetting one of these GUCs at transaction
start, or "CREATE FUNCTION ... SET transaction_read_only = 1") and not
running into problems with it today. Given how long we've had this
issue and not noticed, the side effects in non-assert builds can't be
too serious.
Per bug #17385 from Andrew Bille.
Masahiko Sawada
Discussion: https://postgr.es/m/17385-9ee529fb091f0ce5@postgresql.org
Autoconf is showing its age, fewer and fewer contributors know how to wrangle
it. Recursive make has a lot of hard to resolve dependency issues and slow
incremental rebuilds. Our home-grown MSVC build system is hard to maintain for
developers not using Windows and runs tests serially. While these and other
issues could individually be addressed with incremental improvements, together
they seem best addressed by moving to a more modern build system.
After evaluating different build system choices, we chose to use meson, to a
good degree based on the adoption by other open source projects.
We decided that it's more realistic to commit a relatively early version of
the new build system and mature it in tree.
This commit adds an initial version of a meson based build system. It supports
building postgres on at least AIX, FreeBSD, Linux, macOS, NetBSD, OpenBSD,
Solaris and Windows (however only gcc is supported on aix, solaris). For
Windows/MSVC postgres can now be built with ninja (faster, particularly for
incremental builds) and msbuild (supporting the visual studio GUI, but
building slower).
Several aspects (e.g. Windows rc file generation, PGXS compatibility, LLVM
bitcode generation, documentation adjustments) are done in subsequent commits
requiring further review. Other aspects (e.g. not installing test-only
extensions) are not yet addressed.
When building on Windows with msbuild, builds are slower when using a visual
studio version older than 2019, because those versions do not support
MultiToolTask, required by meson for intra-target parallelism.
The plan is to remove the MSVC specific build system in src/tools/msvc soon
after reaching feature parity. However, we're not planning to remove the
autoconf/make build system in the near future. Likely we're going to keep at
least the parts required for PGXS to keep working around until all supported
versions build with meson.
Some initial help for postgres developers is at
https://wiki.postgresql.org/wiki/Meson
With contributions from Thomas Munro, John Naylor, Stone Tickle and others.
Author: Andres Freund <andres@anarazel.de>
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Author: Peter Eisentraut <peter@eisentraut.org>
Reviewed-By: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/20211012083721.hvixq4pnh2pixr3j@alap3.anarazel.de
Fix selfuncs.h cpluspluscheck complaint, without reintroducing a
parameter name inconsistency (restore the original declaration names,
and then make corresponding function definitions consistent with that).
Oversight in commit a601366a.
Author: Peter Geoghegan <pg@bowt.ie>
Reported-By: Andres Freund <andres@anarazel.de>
Make sure that function declarations use names that exactly match the
corresponding names from function definitions in optimizer, parser,
utility, libpq, and "commands" code, as well as in remaining library
code. Do the same for all code related to frontend programs (with the
exception of pg_dump/pg_dumpall related code).
Like other recent commits that cleaned up function parameter names, this
commit was written with help from clang-tidy. Later commits will handle
ecpg and pg_dump/pg_dumpall.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznJt9CMM9KJTMjJh_zbL5hD9oX44qdJ4aqZtjFi-zA3Tg@mail.gmail.com
guc.c has grown to be one of our largest .c files, making it
a bottleneck for compilation. It's also acquired a bunch of
knowledge that'd be better kept elsewhere, because of our not
very good habit of putting variable-specific check hooks here.
Hence, split it up along these lines:
* guc.c itself retains just the core GUC housekeeping mechanisms.
* New file guc_funcs.c contains the SET/SHOW interfaces and some
SQL-accessible functions for GUC manipulation.
* New file guc_tables.c contains the data arrays that define the
built-in GUC variables, along with some already-exported constant
tables.
* GUC check/assign/show hook functions are moved to the variable's
home module, whenever that's clearly identifiable. A few hard-
to-classify hooks ended up in commands/variable.c, which was
already a home for miscellaneous GUC hook functions.
To avoid cluttering a lot more header files with #include "guc.h",
I also invented a new header file utils/guc_hooks.h and put all
the GUC hook functions' declarations there, regardless of their
originating module. That allowed removal of #include "guc.h"
from some existing headers. The fallout from that (hopefully
all caught here) demonstrates clearly why such inclusions are
best minimized: there are a lot of files that, for example,
were getting array.h at two or more levels of remove, despite
not having any connection at all to GUCs in themselves.
There is some very minor code beautification here, such as
renaming a couple of inconsistently-named hook functions
and improving some comments. But mostly this just moves
code from point A to point B and deals with the ensuing
needs for #include adjustments and exporting a few functions
that previously weren't exported.
Patch by me, per a suggestion from Andres Freund; thanks also
to Michael Paquier for the idea to invent guc_funcs.c.
Discussion: https://postgr.es/m/587607.1662836699@sss.pgh.pa.us
This adds additional variants of palloc, pg_malloc, etc. that
encapsulate common usage patterns and provide more type safety.
Specifically, this adds palloc_object(), palloc_array(), and
repalloc_array(), which take the type name of the object to be
allocated as its first argument and cast the return as a pointer to
that type. There are also palloc0_object() and palloc0_array()
variants for initializing with zero, and pg_malloc_*() variants of all
of the above.
Inspired by the talloc library.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/bb755632-2a43-d523-36f8-a1e7a389a907@enterprisedb.com
The reverts the following and makes some associated cleanups:
commit f79b803dc: Common SQL/JSON clauses
commit f4fb45d15: SQL/JSON constructors
commit 5f0adec25: Make STRING an unreserved_keyword.
commit 33a377608: IS JSON predicate
commit 1a36bc9db: SQL/JSON query functions
commit 606948b05: SQL JSON functions
commit 49082c2cc: RETURNING clause for JSON() and JSON_SCALAR()
commit 4e34747c8: JSON_TABLE
commit fadb48b00: PLAN clauses for JSON_TABLE
commit 2ef6f11b0: Reduce running time of jsonb_sqljson test
commit 14d3f24fa: Further improve jsonb_sqljson parallel test
commit a6baa4bad: Documentation for SQL/JSON features
commit b46bcf7a4: Improve readability of SQL/JSON documentation.
commit 112fdb352: Fix finalization for json_objectagg and friends
commit fcdb35c32: Fix transformJsonBehavior
commit 4cd8717af: Improve a couple of sql/json error messages
commit f7a605f63: Small cleanups in SQL/JSON code
commit 9c3d25e17: Fix JSON_OBJECTAGG uniquefying bug
commit a79153b7a: Claim SQL standard compliance for SQL/JSON features
commit a1e7616d6: Rework SQL/JSON documentation
commit 8d9f9634e: Fix errors in copyfuncs/equalfuncs support for JSON node types.
commit 3c633f32b: Only allow returning string types or bytea from json_serialize
commit 67b26703b: expression eval: Fix EEOP_JSON_CONSTRUCTOR and EEOP_JSONEXPR size.
The release notes are also adjusted.
Backpatch to release 15.
Discussion: https://postgr.es/m/40d2c882-bcac-19a9-754d-4299e1d87ac7@postgresql.org
Robert Haas reported that his older clang compiler didn't like the two
Asserts which were verifying that the given MemoryContextMethodID was <=
MEMORY_CONTEXT_METHODID_MASK when building with
-Wtautological-constant-out-of-range-compare. In my (David's) opinion,
the compiler is wrong to warn about that. Newer versions of clang don't
warn about the out of range enum value, so perhaps this was a bug that has
now been fixed. To keep older clang versions happy, let's just cast the
enum value to int to stop the compiler complaining.
The main reason for the Asserts mentioned above to exist are to inform
future developers which are adding new MemoryContexts if they run out of
bit space in MemoryChunk to store the MemoryContextMethodID. As pointed
out by Tom Lane, it seems wise to also add a comment to the header for
that enum to document the restriction on these enum values.
Additionally, also fix an incorrect usage of UINT64CONST() which was
introduced in c6e0fe1f2.
Author: Robert Haas, David Rowley
Discussion: https://postgr.es/m/CA+TgmoYGG2C7Vbw1cjkQRRBL3zOk8SmhrQnsJgzscX=N9AwPrw@mail.gmail.com
This reverts commit df0f4feef. It turns out the problem which was causing
the 32-bit ARM and PPC animals to fail was due to a MAXALIGN problem in
slab.c. This was fixed by d5ee4db0e. The padding that was added in
df0f4feef would only do anything on machines where uint64 was not aligned
to 8 bytes. The 32-bit machines which were failing are not in that
category, so revert this commit.
Discussion: https://postgr.es/m/3209100.1661787561@sss.pgh.pa.us
Buildfarm animals skate, grison and mamba are Assert failing on the
pointer being given to repalloc not being MAXALIGNED. c6e0fe1f2a made
changes in that area.
All of these animals are 32-bit with a MAXIMUM_ALIGNOF of 8 and a
SIZEOF_VOID_P of 4. I suspect that the pointer is not properly aligned due
to the lack of padding in the MemoryChunk struct.
Here we add the same type of padding that was previously used in
AllocChunkData and GenerationChunk that c6e0fe1f2a neglected to add.
Discussion: https://postgr.es/m/CAA4eK1%2B1JyW5TiL%3DyV-3Uq1CrfnTyn0Xrk5uArt31Z%3D8rgPhXQ%40mail.gmail.com
Whenever we palloc a chunk of memory, traditionally, we prefix the
returned pointer with a pointer to the memory context to which the chunk
belongs. This is required so that we're able to easily determine the
owning context when performing operations such as pfree() and repalloc().
For the AllocSet context, prior to this commit we additionally prefixed
the pointer to the owning context with the size of the chunk. This made
the header 16 bytes in size. This 16-byte overhead was required for all
AllocSet allocations regardless of the allocation size.
For the generation context, the problem was worse; in addition to the
pointer to the owning context and chunk size, we also stored a pointer to
the owning block so that we could track the number of freed chunks on a
block.
The slab allocator had a 16-byte chunk header.
The changes being made here reduce the chunk header size down to just 8
bytes for all 3 of our memory context types. For small to medium sized
allocations, this significantly increases the number of chunks that we can
fit on a given block which results in much more efficient use of memory.
Additionally, this commit completely changes the rule that pointers to
palloc'd memory must be directly prefixed by a pointer to the owning
memory context and instead, we now insist that they're directly prefixed
by an 8-byte value where the least significant 3-bits are set to a value
to indicate which type of memory context the pointer belongs to. Using
those 3 bits as an index (known as MemoryContextMethodID) to a new array
which stores the methods for each memory context type, we're now able to
pass the pointer given to functions such as pfree() and repalloc() to the
function specific to that context implementation to allow them to devise
their own methods of finding the memory context which owns the given
allocated chunk of memory.
The reason we're able to reduce the chunk header down to just 8 bytes is
because of the way we make use of the remaining 61 bits of the required
8-byte chunk header. Here we also implement a general-purpose MemoryChunk
struct which makes use of those 61 remaining bits to allow the storage of
a 30-bit value which the MemoryContext is free to use as it pleases, and
also the number of bytes which must be subtracted from the chunk to get a
reference to the block that the chunk is stored on (also 30 bits). The 1
additional remaining bit is to denote if the chunk is an "external" chunk
or not. External here means that the chunk header does not store the
30-bit value or the block offset. The MemoryContext can use these
external chunks at any time, but must use them if any of the two 30-bit
fields are not large enough for the value(s) that need to be stored in
them. When the chunk is marked as external, it is up to the MemoryContext
to devise its own means to determine the block offset.
Using 3-bits for the MemoryContextMethodID does mean we're limiting
ourselves to only having a maximum of 8 different memory context types.
We could reduce the bit space for the 30-bit value a little to make way
for more than 3 bits, but it seems like it might be better to do that only
if we ever need more than 8 context types. This would only be a problem
if some future memory context type which does not use MemoryChunk really
couldn't give up any of the 61 remaining bits in the chunk header.
With this MemoryChunk, each of our 3 memory context types can quickly
obtain a reference to the block any given chunk is located on. AllocSet
is able to find the context to which the chunk is owned, by first
obtaining a reference to the block by subtracting the block offset as is
stored in the 'hdrmask' field and then referencing the block's 'aset'
field. The Generation context uses the same method, but GenerationBlock
did not have a field pointing back to the owning context, so one is added
by this commit.
In aset.c and generation.c, all allocations larger than allocChunkLimit
are stored on dedicated blocks. When there's just a single chunk on a
block like this, it's easy to find the block from the chunk, we just
subtract the size of the block header from the chunk pointer. The size of
these chunks is also known as we store the endptr on the block, so we can
just subtract the pointer to the allocated memory from that. Because we
can easily find the owning block and the size of the chunk for these
dedicated blocks, we just always use external chunks for allocation sizes
larger than allocChunkLimit. For generation.c, this sidesteps the problem
of non-external MemoryChunks being unable to represent chunk sizes >= 1GB.
This is less of a problem for aset.c as we store the free list index in
the MemoryChunk's spare 30-bit field (the value of which will never be
close to using all 30-bits). We can easily reverse engineer the chunk size
from this when needed. Storing this saves AllocSetFree() from having to
make a call to AllocSetFreeIndex() to determine which free list to put the
newly freed chunk on.
For the slab allocator, this commit adds a new restriction that slab
chunks cannot be >= 1GB in size. If there happened to be any users of
slab.c which used chunk sizes this large, they really should be using
AllocSet instead.
Here we also add a restriction that normal non-dedicated blocks cannot be
1GB or larger. It's now not possible to pass a 'maxBlockSize' >= 1GB
during the creation of an AllocSet or Generation context. Allocations can
still be larger than 1GB, it's just these will always be on dedicated
blocks (which do not have the 1GB restriction).
Author: Andres Freund, David Rowley
Discussion: https://postgr.es/m/CAApHDvpjauCRXcgcaL6+e3eqecEHoeRm9D-kcbuvBitgPnW=vw@mail.gmail.com
SUSv3 <netinet/in.h> defines struct sockaddr_in6, and all targeted Unix
systems have it. Windows has it in <ws2ipdef.h>. Remove the configure
probe, the macro and a small amount of dead code.
Also remove a mention of IPv6-less builds from the documentation, since
there aren't any.
This is similar to commits f5580882 and 077bf2f2 for Unix sockets. Even
though AF_INET6 is an "optional" component of SUSv3, there are no known
modern operating system without it, and it seems even less likely to be
omitted from future systems than AF_UNIX.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA+hUKGKErNfhmvb_H0UprEmp4LPzGN06yR2_0tYikjzB-2ECMw@mail.gmail.com
Somewhere during the development of the patch acquiring a lock during read
access to variable-numbered stats got lost. The missing lock acquisition won't
cause corruption, but can lead to reading torn values when accessing
stats. Add the missing lock acquisitions.
Reported-by: Greg Stark <stark@mit.edu>
Reviewed-by: "Drouvot, Bertrand" <bdrouvot@amazon.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/CAM-w4HMYkM_DkYhWtUGV+qE_rrBxKOzOF0+5faozxO3vXrc9wA@mail.gmail.com
Backpatch: 15-
Previously, membership of role A in role B could be recorded in the
catalog tables only once. This meant that a new grant of role A to
role B would overwrite the previous grant. For other object types, a
new grant of permission on an object - in this case role A - exists
along side the existing grant provided that the grantor is different.
Either grant can be revoked independently of the other, and
permissions remain so long as at least one grant remains. Make role
grants work similarly.
Previously, when granting membership in a role, the superuser could
specify any role whatsoever as the grantor, but for other object types,
the grantor of record must be either the owner of the object, or a
role that currently has privileges to perform a similar GRANT.
Implement the same scheme for role grants, treating the bootstrap
superuser as the role owner since roles do not have owners. This means
that attempting to revoke a grant, or admin option on a grant, can now
fail if there are dependent privileges, and that CASCADE can be used
to revoke these. It also means that you can't grant ADMIN OPTION on
a role back to a user who granted it directly or indirectly to you,
similar to how you can't give WITH GRANT OPTION on a privilege back
to a role which granted it directly or indirectly to you.
Previously, only the superuser could specify GRANTED BY with a user
other than the current user. Relax that rule to allow the grantor
to be any role whose privileges the current user posseses. This
doesn't improve compatibility with what we do for other object types,
where support for GRANTED BY is entirely vestigial, but it makes this
feature more usable and seems to make sense to change at the same time
we're changing related behaviors.
Along the way, fix "ALTER GROUP group_name ADD USER user_name" to
require the same privileges as "GRANT group_name TO user_name".
Previously, CREATEROLE privileges were sufficient for either, but
only the former form was permissible with ADMIN OPTION on the role.
Now, either CREATEROLE or ADMIN OPTION on the role suffices for
either spelling.
Patch by me, reviewed by Stephen Frost.
Discussion: http://postgr.es/m/CA+TgmoaFr-RZeQ+WoQ5nKPv97oT9+aDgK_a5+qWHSgbDsMp1Vg@mail.gmail.com
<sys/resource.h> is in SUSv2 and is on all targeted Unix systems. We
have a replacement for getrusage() on Windows, so let's just move its
declarations into src/include/port/win32/sys/resource.h so that we can
use a standard-looking #include. Also remove an obsolete reference to
CLK_TCK. Also rename src/port/getrusage.c to win32getrusage.c,
following the convention for Windows-only fallback code.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CA%2BhUKG%2BL_3brvh%3D8e0BW_VfX9h7MtwgN%3DnFHP5o7X2oZucY9dg%40mail.gmail.com
This commit addresses a few things around GUCs:
- The TCP-related parameters (the four tcp_keepalives_* and
client_connection_check_interval are listed in postgresql.conf.sample in
a subsection called "TCP settings" of "CONNECTIONS AND AUTHENTICATION",
but they did not have their own group name in guc.c.
- enable_group_by_reordering, stats_fetch_consistency and
recovery_prefetch had an inconsistent description, missing a dot at the
end.
- In postgresql.conf.sample, "Process title" should not have a section
of its own, but it should be a subsection of "REPORTING AND LOGGING".
This impacts the contents of pg_settings, which could be seen as a
compatibility break, so no backpatch is done. This is similar to the
cleanup done in a55a984.
Author: Shinya Kato
Discussion: https://postgr.es/m/5e0c9c608624eafbba910c344282cb14@oss.nttdata.com
Previously we fell back to __FUNCTION__ and then NULL. As __func__ is in C99
that shouldn't be necessary anymore.
Solution.pm defined HAVE_FUNCNAME__FUNCTION instead of
HAVE_FUNCNAME__FUNC (originating in 4164e6636e), as at some point in the past
MSVC only supported __FUNCTION__. Our minimum version supports __func__.
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/20220807012914.ydz73yte6j3coulo@awork3.anarazel.de
This commit puts the implementation of Tuple sort variants into the separate
file tuplesortvariants.c. That gives better separation of the code and
serves well as the demonstration that Tuple sort variant can be defined outside
of tuplesort.c.
Discussion: https://postgr.es/m/CAPpHfdvjix0Ahx-H3Jp1M2R%2B_74P-zKnGGygx4OWr%3DbUQ8BNdw%40mail.gmail.com
Author: Alexander Korotkov
Reviewed-by: Pavel Borisov, Maxim Orlov, Matthias van de Meent
Reviewed-by: Andres Freund, John Naylor
We allow users to set the values of not-yet-loaded extension GUCs,
remembering those values in "placeholder" GUC entries. When/if
the extension is loaded later in the session, we need to verify that
the user had permissions to set the GUC. That was done correctly
before commit a0ffa885e, but as of that commit, we'd check the
permissions of the active role when the LOAD happens, not the role
that had set the value. (This'd be a security bug if it had made it
into a released version.)
In principle this is simple enough to fix: we just need to remember
the exact role OID that set each GUC value, and use that not
GetUserID() when verifying permissions. Maintaining that data in
the guc.c data structures is slightly tedious, but fortunately it's
all basically just copy-n-paste of the logic for tracking the
GucSource of each setting, as we were already doing.
Another oversight is that validate_option_array_item() hadn't
been taught to check for granted GUC privileges. This appears
to manifest only in that ALTER ROLE/DATABASE RESET ALL will
fail to reset settings that the user should be allowed to reset.
Patch by myself and Nathan Bossart, per report from Nathan Bossart.
Back-patch to v15 where the faulty code came in.
Discussion: https://postgr.es/m/20220706224727.GA2158260@nathanxps13
For some systems, we need to avoid unsatisfied-external-reference
errors in static inlines. See
27d2693187 for example. In order to
test that on other systems, the gcc option -fkeep-inline-functions can
be used. But it actually is a bit stricter than what we currently
have in place, so fix up a few more places along the lines of the
above commit. (This undoes part of commit
2cd2569c72b8920048e35c31c9be30a6170e1410.)
(Note, this does not add that gcc option anywhere to the build system,
it just makes it possible to use it successfully manually.)
Discussion: https://www.postgresql.org/message-id/flat/E1oBgIW-002ehP-VJ%40gemulon.postgresql.org
Previously we displayed "DSMFillZeroWrite" while in posix_fallocate(),
because we shared the same wait event for "mmap" and "posix" DSM types.
Let's introduce a new wait event "DSMAllocate", to be more accurate.
Reported-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220711174518.yldckniicknsxgzl%40awork3.anarazel.de
Refactor so that log_line_prefix() is a thin wrapper over a new
function log_status_format(), and move the implementation to the
latter. Export log_status_format() so that it can be used by an
emit_log_hook.
Discussion: https://postgr.es/m/39c8197652f4d3050aedafae79fa5af31096505f.camel%40j-davis.com
Reviewed-by: Michael Paquier, Alvaro Herrera
Add a script to automatically generate the node support functions
(copy, equal, out, and read, as well as the node tags enum) from the
struct definitions.
For each of the four node support files, it creates two include files,
e.g., copyfuncs.funcs.c and copyfuncs.switch.c, to include in the main
file. All the scaffolding of the main file stays in place.
I have tried to mostly make the coverage of the output match what is
currently there. For example, one could now do out/read coverage of
utility statement nodes, but I have manually excluded those for now.
The reason is mainly that it's easier to diff the before and after,
and adding a bunch of stuff like this might require a separate
analysis and review.
Subtyping (TidScan -> Scan) is supported.
For the hard cases, you can just write a manual function and exclude
generating one. For the not so hard cases, there is a way of
annotating struct fields to get special behaviors. For example,
pg_node_attr(equal_ignore) has the field ignored in equal functions.
(In this patch, I have only ifdef'ed out the code to could be removed,
mainly so that it won't constantly have merge conflicts. It will be
deleted in a separate patch. All the code comments that are worth
keeping from those sections have already been moved to the header
files where the structs are defined.)
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/c1097590-a6a4-486a-64b1-e1f9cc0533ce%40enterprisedb.com
We have been using the term RelFileNode to refer to either (1) the
integer that is used to name the sequence of files for a certain relation
within the directory set aside for that tablespace/database combination;
or (2) that value plus the OIDs of the tablespace and database; or
occasionally (3) the whole series of files created for a relation
based on those values. Using the same name for more than one thing is
confusing.
Replace RelFileNode with RelFileNumber when we're talking about just the
single number, i.e. (1) from above, and with RelFileLocator when we're
talking about all the things that are needed to locate a relation's files
on disk, i.e. (2) from above. In the places where we refer to (3) as
a relfilenode, instead refer to "relation storage".
Since there is a ton of SQL code in the world that knows about
pg_class.relfilenode, don't change the name of that column, or of other
SQL-facing things that derive their name from it.
On the other hand, do adjust closely-related internal terminology. For
example, the structure member names dbNode and spcNode appear to be
derived from the fact that the structure itself was called RelFileNode,
so change those to dbOid and spcOid. Likewise, various variables with
names like rnode and relnode get renamed appropriately, according to
how they're being used in context.
Hopefully, this is clearer than before. It is also preparation for
future patches that intend to widen the relfilenumber fields from its
current width of 32 bits. Variables that store a relfilenumber are now
declared as type RelFileNumber rather than type Oid; right now, these
are the same, but that can now more easily be changed.
Dilip Kumar, per an idea from me. Reviewed also by Andres Freund.
I fixed some whitespace issues, changed a couple of words in a
comment, and made one other minor correction.
Discussion: http://postgr.es/m/CA+TgmoamOtXbVAQf9hWFzonUo6bhhjS6toZQd7HZ-pmojtAmag@mail.gmail.com
Discussion: http://postgr.es/m/CA+Tgmobp7+7kmi4gkq7Y+4AM9fTvL+O1oQ4-5gFTT+6Ng-dQ=g@mail.gmail.com
Discussion: http://postgr.es/m/CAFiTN-vTe79M8uDH1yprOU64MNFE+R3ODRuA+JWf27JbhY4hJw@mail.gmail.com
pg_attribute_nonnull(...) can be used to generate compiler warnings
when a function is called with the specified arguments set to NULL, as
per an idea from Andres Freund. An empty argument list indicates that
no pointer arguments can be NULL. pg_attribute_nonnull() only works for
compilers that support the nonnull function attribute. If nonnull is
not supported, pg_attribute_nonnull() has no effect.
As a beginning, this commit uses it for the DefineCustomXXXVariable()
functions to generate warnings when the "name" and "value" arguments are
set to NULL. This will likely be expanded to other places in the
future, where it makes sense.
Author: Nathan Bossart
Reviewed by: Michael Paquier, Tom Lane
Discussion: https://postgr.es/m/20220525061739.ur7x535vtzyzkmqo@alap3.anarazel.de
There were many calls to construct_array() and deconstruct_array() for
built-in types, for example, when dealing with system catalog columns.
These all hardcoded the type attributes necessary to pass to these
functions.
To simplify this a bit, add construct_array_builtin(),
deconstruct_array_builtin() as wrappers that centralize this hardcoded
knowledge. This simplifies many call sites and reduces the amount of
hardcoded stuff that is spread around.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/2914356f-9e5f-8c59-2995-5997fc48bcba%40enterprisedb.com
Previously, we encoded both NULL and the first byte at the base address
as 0. That confusion led to the assertion in commit e07d4ddc, which
failed when min_dynamic_shared_memory was used. Give them distinct
encodings, by switching to 1-based offsets for non-NULL pointers. Also
improve macro hygiene in passing (missing/misplaced parentheses), and
remove open-coded access to the raw offset value from freepage.c/h.
Although e07d4ddc was back-patched to 10, the only code that actually
makes use of relptr at the base address arrived in 84b1c63a, so no need
to back-patch further than 14 for now.
Reported-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/20220519193839.GT19626%40telsasoft.com
This reverts commits 5753d4ee32 and fe60b67250 that modified HOT to
ignore BRIN indexes. The commit message for 5753d4ee32 claims that:
When determining whether an index update may be skipped by using
HOT, we can ignore attributes indexed only by BRIN indexes. There
are no index pointers to individual tuples in BRIN, and the page
range summary will be updated anyway as it relies on visibility
info.
This is partially incorrect - it's true BRIN indexes don't point to
individual tuples, so HOT chains are not an issue, but the visibitlity
info is not sufficient to keep the index up to date. This can easily
result in corrupted indexes, as demonstrated in the hackers thread.
This does not mean relaxing the HOT restrictions for BRIN is a lost
cause, but it needs to handle the two aspects (allowing HOT chains and
updating the page range summaries) as separate. But that requires a
major changes, and it's too late for that in the current dev cycle.
Reported-by: Tomas Vondra
Discussion: https://postgr.es/m/05ebcb44-f383-86e3-4f31-0a97a55634cf@enterprisedb.com
The original advice for hard-wired SetConfigOption calls was to use
PGC_S_OVERRIDE, particularly for PGC_INTERNAL GUCs. However,
that's really overkill for PGC_INTERNAL GUCs, since there is no
possibility that we need to override a user-provided setting.
Instead use PGC_S_DYNAMIC_DEFAULT in most places, so that the
value will appear with source = 'default' in pg_settings and thereby
not be shown by psql's new \dconfig command. The one exception is
that when changing in_hot_standby in a hot-standby session, we still
use PGC_S_OVERRIDE, because people felt that seeing that in \dconfig
would be a good thing.
Similarly use PGC_S_DYNAMIC_DEFAULT for the auto-tune value of
wal_buffers (if possible, that is if wal_buffers wasn't explicitly
set to -1), and for the typical 2MB value of max_stack_depth.
In combination these changes remove four not-very-interesting
entries from the typical output of \dconfig, all of which people
fingered as "why is that showing up?" in the discussion thread.
Discussion: https://postgr.es/m/3118455.1649267333@sss.pgh.pa.us
David Rowley
Michael Paquier
Andres Freund
Peter Eisentraut
Amit Kapila
Tom Lane
Bruce Momjian
Andrew Dunstan
Robert Haas
Thomas Munro
Jeff Davis
Alexander Korotkov
Alvaro Herrera
Peter Geoghegan
John Naylor
Tomas Vondra