Add a .git-blame-ignore-revs file with a list of pgindent, pgperlyidy,
and reformat-dat-files commit hashes. Postgres hackers that configure
git to use the ignore file will get git-blame output that avoids
attributing line changes to the ignored indent commits. This makes
git-blame output much easier to work with in practice.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAH2-Wz=cVh3GHTP6SdLU-Gnmt2zRdF8vZkcrFdSzXQ=WhbWm9Q@mail.gmail.com
In dc7420c2c9 I (Andres) accidentally used
RelationIsAccessibleInLogicalDecoding() as the sole condition to use the
non-shared catalog horizon in GetOldestNonRemovableTransactionId(). That is
incorrect, as RelationIsAccessibleInLogicalDecoding() checks whether wal_level
is logical.
The correct check, as done e.g. in GlobalVisTestFor(), is to check
IsCatalogRelation() and RelationIsAccessibleInLogicalDecoding().
The observed misbehavior of this bug was that there could be an endless loop
in lazy_scan_prune(), because the horizons used in heap_page_prune() and the
individual tuple liveliness checks did not match. Likely there are other
potential consequences as well.
A later commit will unify the determination which horizon has to be used, and
add additional assertions to make it easier to catch a bug like this.
Reported-By: Justin Pryzby <pryzby@telsasoft.com>
Diagnosed-By: Matthias van de Meent <boekewurm+postgres@gmail.com>
Author: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/CAEze2Wg32Y9+WJfw=aofkRx1ZRFt_Ev6bNPc4PSaz7PjSFtZgQ@mail.gmail.com
linitial_node() fails in assert enabled builds if the given pointer is
not of the specified type. Here the type is IntList. The code thought
it should be expecting List, but it was wrong.
In the existing tests which run this code the initial list element is
always NIL. Since linitial_node() allows NULL, we didn't trigger any
assert failures in the existing regression tests.
There is still some discussion as to whether we need a few more tests in
this area, but for now, since beta2 is looming, fix the bug first.
Bug: #17067
Discussion: https://postgr.es/m/17067-665d50fa321f79e0@postgresql.org
Reported-by: Yaoguang Chen
The failsafe can trigger when index processing is already disabled.
This can happen when VACUUM's INDEX_CLEANUP parameter is "off" and the
failsafe happens to trigger. Remove assertions that assume that index
processing is directly tied to the failsafe.
Oversight in commit c242baa4, which made it possible for the failsafe to
trigger in a two-pass strategy VACUUM that has yet to make its first
call to lazy_vacuum_all_indexes().
This reverts commit 09126984a263; the test case added there failed once
in circumstances that remain mysterious. It seems better to remove the
test for now so that 14beta2 doesn't have random failures built in.
We had a request to provide a way to test at compile time for the
availability of the new pipeline features. More generally, it
seems like a good idea to provide a way to test via #ifdef for
all new libpq API features. People have been using the version
from pg_config.h for that; but that's more likely to represent the
server version than the libpq version, in the increasingly-common
scenario where they're different. It's safer if libpq-fe.h itself
is the source of truth about what features it offers.
Hence, establish a policy that starting in v14 we'll add a suitable
feature-is-present macro to libpq-fe.h when we add new API there.
(There doesn't seem to be much point in applying this policy
retroactively, but it's not too late for v14.)
Tom Lane and Alvaro Herrera, per suggestion from Boris Kolpackov.
Discussion: https://postgr.es/m/boris.20210617102439@codesynthesis.com
Generalize the INDEX_CLEANUP VACUUM parameter (and the corresponding
reloption): make it into a ternary style boolean parameter. It now
exposes a third option, "auto". The "auto" option (which is now the
default) enables the "bypass index vacuuming" optimization added by
commit 1e55e7d1.
"VACUUM (INDEX_CLEANUP TRUE)" is redefined to once again make VACUUM
simply do any required index vacuuming, regardless of how few dead
tuples are encountered during the first scan of the target heap relation
(unless there are exactly zero). This gives users a way of opting out
of the "bypass index vacuuming" optimization, if for whatever reason
that proves necessary. It is also expected to be used by PostgreSQL
developers as a testing option from time to time.
"VACUUM (INDEX_CLEANUP FALSE)" does the same thing as it always has: it
forcibly disables both index vacuuming and index cleanup. It's not
expected to be used much in PostgreSQL 14. The failsafe mechanism added
by commit 1e55e7d1 addresses the same problem in a simpler way.
INDEX_CLEANUP can now be thought of as a testing and compatibility
option.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-By: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/CAH2-WznrBoCST4_Gxh_G9hA8NzGUbeBGnOUC8FcXcrhqsv6OHQ@mail.gmail.com
The code to signal a running walsender when its reserved WAL size grows
too large is completely uncovered before this commit; this adds coverage
for that case.
This test involves sending SIGSTOP to walsender and walreceiver and
running a checkpoint while advancing WAL, then sending SIGCONT. There's
no precedent for this coding in Perl tests, and my reading of relevant
manpages says it's likely to fail on Windows. Because of this, this
test is always skipped on that platform.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/202106102202.mjw4huiix7lo@alvherre.pgsql
Ordinarily, a pg_policy.polroles array wouldn't list the same role
more than once; but CREATE POLICY does not prevent that. If we
perform DROP OWNED BY on a role that is listed more than once,
RemoveRoleFromObjectPolicy either suffered an assertion failure
or encountered a tuple-updated-by-self error. Rewrite it to cope
correctly with duplicate entries, and add a CommandCounterIncrement
call to prevent the other problem.
Per discussion, there's other cleanup that ought to happen here,
but this seems like the minimum essential fix.
Per bug #17062 from Alexander Lakhin. It's been broken all along,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/17062-11f471ae3199ca23@postgresql.org
Commit 547f04e73 caused pgbench to start printing its version number,
which seems like a fine idea, but it needs a bit more work:
* Print the server version number too, when different.
* Print the PG_VERSION string, not some reconstructed approximation.
This patch copies psql's well-tested code for the same purpose.
Discussion: https://postgr.es/m/1226654.1624036821@sss.pgh.pa.us
In the "simple Query" code path, it's fine for parse analysis or
execution of a utility statement to scribble on the statement's node
tree, since that'll just be thrown away afterwards. However it's
not fine if the node tree is in the plan cache, as then it'd be
corrupted for subsequent executions. Up to now we've dealt with
that by having individual utility-statement functions apply
copyObject() if they were going to modify the tree. But that's
prone to errors of omission. Bug #17053 from Charles Samborski
shows that CREATE/ALTER DOMAIN didn't get this memo, and can
crash if executed repeatedly from plan cache.
In the back branches, we'll just apply a narrow band-aid for that,
but in HEAD it seems prudent to have a more principled fix that
will close off the possibility of other similar bugs in future.
Hence, let's hoist the responsibility for doing copyObject up into
ProcessUtility from its children, thus ensuring that it happens for
all utility statement types.
Also, modify ProcessUtility's API so that its callers can tell it
whether a copy step is necessary. It turns out that in all cases,
the immediate caller knows whether the node tree is transient, so
this doesn't involve a huge amount of code thrashing. In this way,
while we lose a little bit in the execute-from-cache code path due
to sometimes copying node trees that wouldn't be mutated anyway,
we gain something in the simple-Query code path by not copying
throwaway node trees. Statements that are complex enough to be
expensive to copy are almost certainly ones that would have to be
copied anyway, so the loss in the cache code path shouldn't be much.
(Note that this whole problem applies only to utility statements.
Optimizable statements don't have the issue because we long ago made
the executor treat Plan trees as read-only. Perhaps someday we will
make utility statement execution act likewise, but I'm not holding
my breath.)
Discussion: https://postgr.es/m/931771.1623893989@sss.pgh.pa.us
Discussion: https://postgr.es/m/17053-3ca3f501bbc212b4@postgresql.org
The fast default code added in Release 11 omitted to check that the
table a fast default was being added to was a plain table. Thus one
could be added to a foreign table, which predicably blows up. Here we
perform that check.
In addition, on the back branches, since some of these might have
escaped into the wild, if we encounter a missing value for
an attribute of something other than a plain table we ignore it.
Fixes bug #17056
Backpatch to release 11,
Reviewed by: Andres Freund, Álvaro Herrera and Tom Lane
One of the error paths left *members uninitialized. That's not a live
bug, because most callers don't look at *members when the function
returns -1, but let's be tidy. One caller, in heap_lock_tuple(), does
"if (members != NULL) pfree(members)", but AFAICS it never passes an
invalid 'multi' value so it should not reach that error case.
The callers are also a bit inconsistent in their expectations.
heap_lock_tuple() pfrees the 'members' array if it's not-NULL, others
pfree() it if "nmembers >= 0", and others if "nmembers > 0". That's
not a live bug either, because the function should never return 0, but
add an Assert for that to make it more clear. I left the callers alone
for now.
I also moved the line where we set *nmembers. It wasn't wrong before,
but I like to do that right next to the 'return' statement, to make it
clear that it's always set on return.
Also remove one unreachable return statement after ereport(ERROR), for
brevity and for consistency with the similar if-block right after it.
Author: Greg Nancarrow with the additional changes by me
Backpatch-through: 9.6, all supported versions
When stuffing a plan from the plancache into a Portal, one is
not supposed to risk throwing an error between GetCachedPlan and
PortalDefineQuery; if that happens, the plan refcount incremented
by GetCachedPlan will be leaked. I managed to break this rule
while refactoring code in 9dbf2b7d7. There is no visible
consequence other than some memory leakage, and since nobody is
very likely to trigger the relevant error conditions many times
in a row, it's not surprising we haven't noticed. Nonetheless,
it's a bug, so rearrange the order of operations to remove the
hazard.
Noted on the way to looking for a better fix for bug #17053.
This mistake is pretty old, so back-patch to all supported
branches.
Commit b676ac443b optimized handling of tuple slots with bulk inserts
into foreign tables, so that the slots are initialized only once and
reused for all batches. The data was however copied into the slots only
after the initialization, inserting duplicate values when the slot gets
reused. Fixed by moving the ExecCopySlot outside the init branch.
The existing postgres_fdw tests failed to catch this due to inserting
data into foreign tables without unique indexes, and then checking only
the number of inserted rows. This adds a new test with both a unique
index and a check of inserted values.
Reported-by: Alexander Pyhalov
Discussion: https://postgr.es/m/7a8cf8d56b3d18e5c0bccd6cd42d04ac%40postgrespro.ru
I started out with the goal of reporting ERRCODE_CONNECTION_FAILURE
when walrcv_connect() fails, but as I looked around I realized that
whoever wrote this code was of the opinion that errcodes are purely
optional. That's not my understanding of our project policy. Hence,
make sure that an errcode is provided in each ereport that (a) is
ERROR or higher level and (b) isn't arguably an internal logic error.
Also fix some very dubious existing errcode assignments.
While this is not per policy, it's also largely cosmetic, since few
of these cases could get reported to applications. So I don't
feel a need to back-patch.
Discussion: https://postgr.es/m/2189704.1623512522@sss.pgh.pa.us
Since commit c24dcd0cfd, we have been using pg_pread() to read the WAL
file, which doesn't change the seek position (unless we fall back to
the implementation in src/port/pread.c). Update comment accordingly.
Backpatch-through: 12, where we started to use pg_pread()
aborted-keyrevoke_2.out was apparently needed when it was added (in
commit 0ac5ad513) to handle the case of serializable transaction mode.
However, the output in serializable mode actually matches the regular
aborted-keyrevoke.out file, and AFAICT has done so for a long time.
There's no need to keep dragging this variant along.
TestLib::perl2host can take a file argument as well as a directory
argument, so that code becomes substantially simpler. Also add comments
on why we're using forward slashes, and why we're setting
PERL_BADLANG=0.
Discussion: https://postgr.es/m/e9947bcd-20ee-027c-f0fe-01f736b7e345@dunslane.net
Bugfix commit 5fc89376 effectively made the lock_waiter_detected field
from vacuumlazy.c's global state struct into private state owned by
lazy_truncate_heap(). Finish this off by replacing the struct field
with a local variable.
It has been spotted that multiranges lack of ability to decompose them into
individual ranges. Subscription and proper expanded object representation
require substantial work, and it's too late for v14. This commit
provides the implementation of unnest(multirange) and cast multirange as
an array of ranges, which is quite trivial.
unnest(multirange) is defined as a polymorphic procedure. The catalog
description of the cast underlying procedure is duplicated for each multirange
type because we don't have anyrangearray polymorphic type to use here.
Catversion is bumped.
Reported-by: Jonathan S. Katz
Discussion: https://postgr.es/m/flat/60258efe-bd7e-4886-82e1-196e0cac5433%40postgresql.org
Author: Alexander Korotkov
Reviewed-by: Justin Pryzby, Jonathan S. Katz, Zhihong Yu
During decoding for speculative inserts, we were relying for cleaning
toast hash on confirmation records or next change records. But that
could lead to multiple problems (a) memory leak if there is neither a
confirmation record nor any other record after toast insertion for a
speculative insert in the transaction, (b) error and assertion failures
if the next operation is not an insert/update on the same table.
The fix is to start queuing spec abort change and clean up toast hash
and change record during its processing. Currently, we are queuing the
spec aborts for both toast and main table even though we perform cleanup
while processing the main table's spec abort record. Later, if we have a
way to distinguish between the spec abort record of toast and the main
table, we can avoid queuing the change for spec aborts of toast tables.
Reported-by: Ashutosh Bapat
Author: Dilip Kumar
Reviewed-by: Amit Kapila
Backpatch-through: 9.6, where it was introduced
Discussion: https://postgr.es/m/CAExHW5sPKF-Oovx_qZe4p5oM6Dvof7_P+XgsNAViug15Fm99jA@mail.gmail.com
This should have been updated in d2d8a229b, but it was overlooked.
According to 31a877f18 which added it, this file is meant to show the
results you get under default_transaction_isolation = serializable.
We've largely lost track of that goal in other isolation tests, but
as long as we've got this one, it should be right.
Noted while fooling about with the isolationtester.
It was unable to wait on a backend that had already left the procarray.
Users tolerant of that limitation can poll pg_stat_activity. Other
users can employ the "timeout" argument of pg_terminate_backend().
Reviewed by Bharath Rupireddy.
Discussion: https://postgr.es/m/20210605013236.GA208701@rfd.leadboat.com
Revert the pg_description entry to its v13 form, since those messages
usually remain shorter and don't discuss individual parameters. No
catversion bump, since pg_description content does not impair backend
compatibility or application compatibility.
Justin Pryzby
Discussion: https://postgr.es/m/20210612182743.GY16435@telsasoft.com
I overlooked that one condition was logically inverted. The fix is a
little bit more involved than simply negating the condition, to make
the code easier to read.
Fix some outdated comments left by the same commit, while at it.
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/YMRlmB3/lZw8YBH+@paquier.xyz
An object found as dropped when digging into the list of objects
returned by pg_event_trigger_ddl_commands() could cause a cache lookup
error, as the calls grabbing for the object address and the type name
would fail if the object was missing.
Those lookup errors could be seen with combinations of ALTER TABLE
sub-commands involving identity columns. The lookup logic is changed in
this code path to get a behavior similar to any other SQL-callable
function by ignoring objects that are not found, taking advantage of
2a10fdc. The back-branches are not changed, as they require this commit
that is too invasive for stable branches.
While on it, add test cases to exercise event triggers with identity
columns, and stress more cases with the event ddl_command_end for
relations.
Author: Sven Klemm, Aleksander Alekseev, Michael Paquier
Discussion: https://postgr.es/m/CAMCrgp2R1cEXU53iYKtW6yVEp2_yKUz+z=3-CTrYpPP+xryRtg@mail.gmail.com
The extra checks added by the recompression of toast data introduced in
bbe0a81 is proving to have a performance impact on VACUUM or CLUSTER
even if no recompression is done. This is more noticeable with more
toastable columns that contain non-NULL values.
Improvements could be done to make those extra checks less expensive,
but that's not material for 14 at this stage, and we are not sure either
if the code path of VACUUM FULL/CLUSTER is adapted for this job.
Per discussion with several people, including Andres Freund, Robert
Haas, Álvaro Herrera, Tom Lane and myself.
Discussion: https://postgr.es/m/20210527003144.xxqppojoiwurc2iz@alap3.anarazel.de
Recent glibc versions have made mktime() fail if tm_isdst is
inconsistent with the prevailing timezone; in particular it fails for
tm_isdst = 1 when the zone is UTC. (This seems wildly inconsistent
with the POSIX-mandated treatment of "incorrect" values for the other
fields of struct tm, so if you ask me it's a bug, but I bet they'll
say it's intentional.) This has been observed to cause cosmetic
problems when pg_restore'ing an archive created in a different
timezone.
To fix, do mktime() using the field values from the archive, and if
that fails try again with tm_isdst = -1. This will give a result
that's off by the UTC-offset difference from the original zone, but
that was true before, too. It's not terribly critical since we don't
do anything with the result except possibly print it. (Someday we
should flush this entire bit of logic and record a standard-format
timestamp in the archive instead. That's not okay for a back-patched
bug fix, though.)
Also, guard our only other use of mktime() by having initdb's
build_time_t() set tm_isdst = -1 not 0. This case could only have
an issue in zones that are DST year-round; but I think some do exist,
or could in future.
Per report from Wells Oliver. Back-patch to all supported
versions, since any of them might need to run with a newer glibc.
Discussion: https://postgr.es/m/CAOC+FBWDhDHO7G-i1_n_hjRzCnUeFO+H-Czi1y10mFhRWpBrew@mail.gmail.com
Translate path slashes on target directory path. This was confusing old
branches, but is applied to all branches for the sake of uniformity.
Perl is perfectly able to understand paths with forward slashes.
Along the way, restore the previous archive_wait query, for the sake of
uniformity with other tests, per gripe from Tom Lane.
This is similar to the work done in 8279f68 for TestLib.pm, where
environment variables set may cause unwanted failures if using a
temporary installation with pg_regress. The list of variables reset is
adjusted in each stable branch depending on what is supported.
Comments are added to remember that the lists in TestLib.pm and
pg_regress.c had better be kept in sync.
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/YMNR9GYDn+fHlMta@paquier.xyz
Backpatch-through: 9.6
Several TAP tests use poll_query_until() to wait for the postmaster
to restart. They were checking to see if a trivial query
(e.g. "SELECT 1") succeeds. However, that's problematic in the wake
of commit 11e9caff8, because now that we feed said query to psql
via stdin, we risk IPC::Run whining about a SIGPIPE failure if psql
quits before reading the query. Hence, we can't use a nonempty
query in cases where we need to wait for connection failures to
stop happening.
Per the precedent of commits c757a3da0 and 6d41dd045, we can pass
"undef" as the query in such cases to ensure that IPC::Run has
nothing to write. However, then we have to say that the expected
output is empty, and this exposes a deficiency in poll_query_until:
if psql fails altogether and returns empty stdout, poll_query_until
will treat that as a success! That's because, contrary to its
documentation, it makes no actual check for psql failure, looking
neither at the exit status nor at stderr.
To fix that, adjust poll_query_until to insist on empty stderr as
well as a stdout match. (I experimented with checking exit status
instead, but it seems that psql often does exit(1) in cases that we
need to consider successes. That might be something to fix someday,
but it would be a non-back-patchable behavior change.)
Back-patch to v10. The test cases needing this exist only as far
back as v11, but it seems wise to keep poll_query_until's behavior
the same in v10, in case we back-patch another such test case in
future. (9.6 does not currently need this change, because in that
branch poll_query_until can't be told to accept empty stdout as
a success case.)
Per assorted buildfarm failures, mostly on hoverfly.
Discussion: https://postgr.es/m/CAA4eK1+zM6L4QSA1XMvXY_qqWwdUmqkOS1+hWvL8QcYEBGA1Uw@mail.gmail.com
Previously, a zero value for the relfilenode resulted in
a confusing error message about "unexpected duplicate".
This function returns NULL for other invalid relfilenode
values, so zero should be treated likewise.
It's been like this all along, so back-patch to all supported
branches.
Justin Pryzby
Discussion: https://postgr.es/m/20210612023324.GT16435@telsasoft.com
Using an Assert to check the validity of incoming messages is an
extremely poor decision. In a debug build, it should not be that easy
for a broken or malicious remote client to crash the logrep worker.
The consequences could be even worse in non-debug builds, which will
fail to make such checks at all, leading to who-knows-what misbehavior.
Hence, promote every Assert that could possibly be triggered by wrong
or out-of-order replication messages to a full test-and-ereport.
To avoid bloating the set of messages the translation team has to cope
with, establish a policy that replication protocol violation error
reports don't need to be translated. Hence, all the new messages here
use errmsg_internal(). A couple of old messages are changed likewise
for consistency.
Along the way, fix some non-idiomatic or outright wrong uses of
hash_search().
Most of these mistakes are new with the "streaming replication"
patch (commit 464824323), but a couple go back a long way.
Back-patch as appropriate.
Discussion: https://postgr.es/m/1719083.1623351052@sss.pgh.pa.us
Commit caba8f0d43 wasn't quite right for msys, as demonstrated by
several buildfarm animals, including jacana and fairywren. We need to
use the msys perl in the archive command, but call it in such a way that
Windows will understand the path. Furthermore, inside the copy script we
need to convert a Windows path to an msys path.
This routine is designed to never return an empty description or NULL,
providing description fallbacks even if missing objects are accepted,
but it included a code path where this was considered possible. All the
callers of this routine already consider NULL as not possible, so
change a bit the code to map with the assumptions of the callers, and
add more comments close to the callers of this routine to outline the
behavior expected.
This code is new as of 2a10fdc, so no backpatch is needed.
Discussion: https://postgr.es/m/YMNY6RGPBRCeLmFb@paquier.xyz
ab55d74 has introduced some tests with rows found as missing in logical
replication subscriptions for partitioned tables, relying on a logic
with a lookup of the logs generated, scanning the whole file. This
commit makes the logic more precise, by scanning the logs only from the
position before the key queries are run to the position where we check
for the logs. This will reduce the risk of issues with log patterns
overlapping with each other if those tests get more complicated in the
future.
Per discussion with Tom Lane.
Discussion: https://postgr.es/m/YMP+Gx2S8meYYHW4@paquier.xyz
Backpatch-through: 13
941697c3c1 changed ProcArrayAdd()/Remove() substantially. As reported by
zhanyi, I missed that due to the introduction of the PGPROC->pgxactoff
ProcArrayRemove() does not need to search for the position in
procArray->pgprocnos anymore - that's pgxactoff. Remove the search loop.
The removal of the search loop reduces assertion coverage a bit - but we can
easily do better than before by adding assertions to other loops over
pgprocnos elements.
Also do a bit of cleanup, mostly by reducing line lengths by introducing local
helper variables and adding newlines.
Author: zhanyi <w@hidva.com>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/tencent_5624AA3B116B3D1C31CA9744@qq.com
We were already reporting it, but only after the parallel workers were
finished, which is visibly much later than what happens in a serial
build.
With this change we report it when the leader starts its own sort phase
when participating in the build (the normal case). Now this might
happen a little later than when the workers start their sorting phases,
but a) communicating the actual phase start from workers is likely to be
a hassle, and b) the sort phase start is pretty fuzzy anyway, since
sorting per se is actually initiated by tuplesort.c internally earlier
than tuplesort_performsort() is called.
Backpatch to pg12, where the progress reporting code for CREATE INDEX
went in.
Reported-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Author: Matthias van de Meent <boekewurm+postgres@gmail.com>
Reviewed-by: Greg Nancarrow <gregn4422@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/1128176d-1eee-55d4-37ca-e63644422adb
apply_handle_tuple_routing(), having detected and reported that
the tuple it needed to update didn't exist, tried to update that
tuple anyway, leading to a null-pointer dereference.
logicalrep_partition_open() failed to ensure that the
LogicalRepPartMapEntry it built for a partition was fully
independent of that for the partition root, leading to
trouble if the root entry was later freed or rebuilt.
Meanwhile, on the publisher's side, pgoutput_change() sometimes
attempted to apply execute_attr_map_tuple() to a NULL tuple.
The first of these was reported by Sergey Bernikov in bug #17055;
I found the other two while developing some test cases for this
sadly under-tested code.
Diagnosis and patch for the first issue by Amit Langote; patches
for the others by me; new test cases by me. Back-patch to v13
where this logic came in.
Discussion: https://postgr.es/m/17055-9ba800ec8522668b@postgresql.org
Commit acb7e4eb6b added a new implementation for PQsendQuery so that
it works in pipeline mode (by using extended query protocol), but it
behaves differently from the 'Q' message (in simple query protocol) used
by regular implementation: the new one doesn't close the unnamed portal.
Change the new code to have identical behavior to the old.
Reported-by: Yura Sokolov <y.sokolov@postgrespro.ru>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/202106072107.d4i55hdscxqj@alvherre.pgsql
Commit b663a41363 introduced bulk inserts for FDW, but the handling of
tuple slots turned out to be problematic for two reasons. Firstly, the
slots were re-created for each individual batch. Secondly, all slots
referenced the same tuple descriptor - with reasonably small batches
this is not an issue, but with large batches this triggers O(N^2)
behavior in the resource owner code.
These two issues work against each other - to reduce the number of times
a slot has to be created/dropped, larger batches are needed. However,
the larger the batch, the more expensive the resource owner gets. For
practical batch sizes (100 - 1000) this would not be a big problem, as
the benefits (latency savings) greatly exceed the resource owner costs.
But for extremely large batches it might be much worse, possibly even
losing with non-batching mode.
Fixed by initializing tuple slots only once (and reusing them across
batches) and by using a new tuple descriptor copy for each slot.
Discussion: https://postgr.es/m/ebbbcc7d-4286-8c28-0272-61b4753af761%40enterprisedb.com
The code added to mark replication slots invalid in commit c655077639
had the race condition that a slot can be dropped or advanced
concurrently with checkpointer trying to invalidate it. Rewrite the
code to close those races.
The changes to ReplicationSlotAcquire's API added with c655077639 are
not necessary anymore. To avoid an ABI break in released branches, this
commit leaves that unchanged; it'll be changed in a master-only commit
separately.
Backpatch to 13, where this code first appeared.
Reported-by: Andres Freund <andres@anarazel.de>
Author: Andres Freund <andres@anarazel.de>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20210408001037.wfmk6jud36auhfqm@alap3.anarazel.de
Peter Geoghegan
Andres Freund
David Rowley
Peter Eisentraut
Alvaro Herrera
Tom Lane
Amit Kapila
Andrew Dunstan
Fujii Masao
Heikki Linnakangas
Tomas Vondra
Alexander Korotkov
Noah Misch
Michael Paquier