bootstrap) check for a valid PG_VERSION file before looking at anything
else in the data directory. This fixes confusing error report when
trying to start current sources in a pre-7.1 data directory.
Per trouble report from Rich Shepard 10/18/01.
existing lock manager and spinlocks: it understands exclusive vs shared
lock but has few other fancy features. Replace most uses of spinlocks
with lightweight locks. All remaining uses of spinlocks have very short
lock hold times (a few dozen instructions), so tweak spinlock backoff
code to work efficiently given this assumption. All per my proposal on
pghackers 26-Sep-01.
pgsql-hackers. pg_opclass now has a row for each opclass supported by each
index AM, not a row for each opclass name. This allows pg_opclass to show
directly whether an AM supports an opclass, and furthermore makes it possible
to store additional information about an opclass that might be AM-dependent.
pg_opclass and pg_amop now store "lossy" and "haskeytype" information that we
previously expected the user to remember to provide in CREATE INDEX commands.
Lossiness is no longer an index-level property, but is associated with the
use of a particular operator in a particular index opclass.
Along the way, IndexSupportInitialize now uses the syscaches to retrieve
pg_amop and pg_amproc entries. I find this reduces backend launch time by
about ten percent, at the cost of a couple more special cases in catcache.c's
IndexScanOK.
Initial work by Oleg Bartunov and Teodor Sigaev, further hacking by Tom Lane.
initdb forced.
default, but OIDS are removed from many system catalogs that don't need them.
Some interesting side effects: TOAST pointers are 20 bytes not 32 now;
pg_description has a three-column key instead of one.
Bugs fixed in passing: BINARY cursors work again; pg_class.relhaspkey
has some usefulness; pg_dump dumps comments on indexes, rules, and
triggers in a valid order.
initdb forced.
platforms system(2) gets confused unless the signal handler is set to
SIG_DFL, not SIG_IGN. pgstats.c now uses pqsignal() as it should,
not signal(). Also, arrange for the stats collector process to show
a reasonable ID in 'ps', rather than looking like a postmaster.
Note: I didn't force an initdb, figuring that one today was enough.
However, there is a new function in pg_proc.h, and pg_dump won't be
able to dump partial indexes until you add that function.
per previous discussion on pghackers. Most of the duplicate code in
different AMs' ambuild routines has been moved out to a common routine
in index.c; this means that all index types now do the right things about
inserting recently-dead tuples, etc. (I also removed support for EXTEND
INDEX in the ambuild routines, since that's about to go away anyway, and
it cluttered the code a lot.) The retail indextuple deletion routines have
been replaced by a "bulk delete" routine in which the indexscan is inside
the access method. I haven't pushed this change as far as it should go yet,
but it should allow considerable simplification of the internal bookkeeping
for deletions. Also, add flag columns to pg_am to eliminate various
hardcoded tests on AM OIDs, and remove unused pg_am columns.
Fix rtree and gist index types to not attempt to store NULLs; before this,
gist usually crashed, while rtree managed not to crash but computed wacko
bounding boxes for NULL entries (which might have had something to do with
the performance problems we've heard about occasionally).
Add AtEOXact routines to hash, rtree, and gist, all of which have static
state that needs to be reset after an error. We discovered this need long
ago for btree, but missed the other guys.
Oh, one more thing: concurrent VACUUM is now the default.
datatypes, not only strings. parse_hook is useless for bool, I suppose,
but it seems possibly useful for int and double to apply variable-specific
constraints that are more complex than simple range limits. assign_hook
is definitely useful for all datatypes --- we need it right now for bool
to support date cache reset when changing Australian timezone rule setting.
Also, clean up some residual problems with the reset all/show all patch,
including memory leaks and mistaken reset of PostPortNumber. It seems
best that RESET ALL not touch variables that don't have SUSET or
USERSET context.
* Store two past checkpoint locations, not just one, in pg_control.
On startup, we fall back to the older checkpoint if the newer one
is unreadable. Also, a physical copy of the newest checkpoint record
is kept in pg_control for possible use in disaster recovery (ie,
complete loss of pg_xlog). Also add a version number for pg_control
itself. Remove archdir from pg_control; it ought to be a GUC
parameter, not a special case (not that it's implemented yet anyway).
* Suppress successive checkpoint records when nothing has been entered
in the WAL log since the last one. This is not so much to avoid I/O
as to make it actually useful to keep track of the last two
checkpoints. If the things are right next to each other then there's
not a lot of redundancy gained...
* Change CRC scheme to a true 64-bit CRC, not a pair of 32-bit CRCs
on alternate bytes. Polynomial borrowed from ECMA DLT1 standard.
* Fix XLOG record length handling so that it will work at BLCKSZ = 32k.
* Change XID allocation to work more like OID allocation. (This is of
dubious necessity, but I think it's a good idea anyway.)
* Fix a number of minor bugs, such as off-by-one logic for XLOG file
wraparound at the 4 gig mark.
* Add documentation and clean up some coding infelicities; move file
format declarations out to include files where planned contrib
utilities can get at them.
* Checkpoint will now occur every CHECKPOINT_SEGMENTS log segments or
every CHECKPOINT_TIMEOUT seconds, whichever comes first. It is also
possible to force a checkpoint by sending SIGUSR1 to the postmaster
(undocumented feature...)
* Defend against kill -9 postmaster by storing shmem block's key and ID
in postmaster.pid lockfile, and checking at startup to ensure that no
processes are still connected to old shmem block (if it still exists).
* Switch backends to accept SIGQUIT rather than SIGUSR1 for emergency
stop, for symmetry with postmaster and xlog utilities. Clean up signal
handling in bootstrap.c so that xlog utilities launched by postmaster
will react to signals better.
* Standalone bootstrap now grabs lockfile in target directory, as added
insurance against running it in parallel with live postmaster.
are treated more like 'cancel' interrupts: the signal handler sets a
flag that is examined at well-defined spots, rather than trying to cope
with an interrupt that might happen anywhere. See pghackers discussion
of 1/12/01.
re-adopt these settings at every postmaster or standalone-backend startup.
This should fix problems with indexes becoming corrupt due to failure to
provide consistent locale environment for postmaster at all times. Also,
refuse to start up a non-locale-enabled compilation in a database originally
initdb'd with a non-C locale. Suppress LIKE index optimization if locale
is not "C" or "POSIX" (are there any other locales where it's safe?).
Issue NOTICE during initdb if selected locale disables LIKE optimization.
(WAL logging for this is not done yet, however.) Clean up a number of really
crufty things that are no longer needed now that DROP behaves nicely. Make
temp table mapper do the right things when drop or rename affecting a temp
table is rolled back. Also, remove "relation modified while in use" error
check, in favor of locking tables at first reference and holding that lock
throughout the statement.
source directory. This involves mostly makefiles using $(srcdir) when they
might have used ".". (Regression tests don't work with this, yet.)
Sort out usage of CPPFLAGS, CFLAGS (and CXXFLAGS). Add "override" keyword
in most places, to preserve necessary flags even when the user overrode the
flags.
user is now defined in terms of the user id, the user name is only computed
upon request (for display purposes). This is kind of the opposite of the
previous state, which would maintain the user name and compute the user id
for permission checks.
Besides perhaps saving a few cycles (integer vs string), this now creates a
single point of attack for changing the user id during a connection, for
purposes of "setuid" functions, etc.
incarnations (I hope). When an acceptable flex version is not found, print
instructive error messages from both configure and the makefiles, so that
users can continue building anyway.
These two routines will now ALWAYS elog() on failure, whether you ask for
a lock or not. If you really want to get a NULL return on failure, call
the new routines heap_open_nofail()/heap_openr_nofail(). By my count there
are only about three places that actually want that behavior. There were
rather more than three places that were missing the check they needed to
make under the old convention :-(.
The latter updated accordingly. Also add `dist' and `distcheck' targets
to play with, but caveat packager.
Updated backend/bootstrap and backend/parser makefile to make them
marginally builddir aware and fix the usual set of things.
Add rule to automatically remake config.h dependent on config.h.in and
config.status. (Adopted from Autoconf manual and about every other
package.) On a good day we should now have a complete and accurate set
of dependencies throughout everything.
pass-by-ref data types --- eg, an index on lower(textfield) --- no longer
leak memory during index creation or update. Clean up a lot of redundant
code ... did you know that copy, vacuum, truncate, reindex, extend index,
and bootstrap each basically duplicated the main executor's logic for
extracting information about an index and preparing index entries?
Functional indexes should be a little faster now too, due to removal
of repeated function lookups.
CREATE INDEX 'opt_type' clause is deimplemented by these changes,
but I haven't removed it from the parser yet (need to merge with
Thomas' latest change set first).
Don't go through pg_exec_query_dest(), but directly to the execution
routines. Also, extend parameter lists so that there's no need to
change the global setting of allowSystemTableMods, a hack that was
certain to cause trouble in the event of any error.
for details). It doesn't really do that much yet, since there are no
short-term memory contexts in the executor, but the infrastructure is
in place and long-term contexts are handled reasonably. A few long-
standing bugs have been fixed, such as 'VACUUM; anything' in a single
query string crashing. Also, out-of-memory is now considered a
recoverable ERROR, not FATAL.
Eliminate a large amount of crufty, now-dead code in and around
memory management.
Fix problem with holding off SIGTRAP, SIGSEGV, etc in postmaster and
backend startup.
option settings. Sort out SIGHUP vs BACKEND -- there is no total ordering
here, so make explicit checks. Add comments explaining all of this.
Removed permissions check on SHOW command.
Add examine_subclass to the game, rename to SQL_inheritance to fit the
official data model better. Adjust documentation.
Standalone backend needs to reset all options before it starts. To
facilitate that, have IsUnderPostmaster be set by the postmaster itself,
don't wait for the magic -p switch.
Also make sure that all environment variables and argv's survive
init_ps_display(). Use strdup where necessary.
Have initdb make configuration files (postgresql.conf, pg_hba.conf) mode
0600 -- having configuration files is no fun if you can't edit them.
materialized tupleset is small enough) instead of a temporary relation.
This was something I was thinking of doing anyway for performance, and Jan
says he needs it for TOAST because he doesn't want to cope with toasting
noname relations. With this change, the 'noname table' support in heap.c
is dead code, and I have accordingly removed it. Also clean up 'noname'
plan handling in planner --- nonames are either sort or materialize plans,
and it seems less confusing to handle them separately under those names.
passing the index-is-unique flag to index build routines (duh! ...
why wasn't it done this way to begin with?). Aside from eliminating
an eyesore, this should save a few milliseconds in btree index creation
because a full scan of pg_index is not needed any more.
CPP) to create platform independent files. Unfortunately, that means that
every config.status (or configure) run invariably causes a relink of the
postmaster and also that we can't put these files in the distribution
(usefully). So we make it a little smarter: when the output files already
exist and it notices that it would recreate them in identical form, it
doesn't touch them. In order to avoid re-running the make rule all the time
we update a timestamp file instead.
Update release_prep accordingly. Also make Gen_fmgrtab.sh use the awk that
is detected at configure time, not necessarily named `awk' and have it check
for exit statuses a little better.
In other news... Remove USE_LOCALE from the templates, it was set to `no'
everywhere anyway. Also remove YACC and YFLAGS from the templates, configure
is smart enough to find bison or yacc itself. Use AC_PROG_YACC for that
instead of the hand-crafted code. Do not set YFLAGS to `-d'. The make rules
that need this flag should explicitly invoke it. YFLAGS should be a user
variable. Update the makefiles to that effect.
inputs have been converted to newstyle. This should go a long way towards
fixing our portability problems with platforms where char and short
parameters are passed differently from int-width parameters. Still
more to do for the Alpha port however.
That means you can now set your options in either or all of $PGDATA/configuration,
some postmaster option (--enable-fsync=off), or set a SET command. The list of
options is in backend/utils/misc/guc.c, documentation will be written post haste.
pg_options is gone, so is that pq_geqo config file. Also removed were backend -K,
-Q, and -T options (no longer applicable, although -d0 does the same as -Q).
Added to configure an --enable-syslog option.
changed all callers from TPRINTF to elog(DEBUG)
key call sites are changed, but most called functions are still oldstyle.
An exception is that the PL managers are updated (so, for example, NULL
handling now behaves as expected in plperl and plpgsql functions).
NOTE initdb is forced due to added column in pg_proc.