cvs.
The Debian bug report says, "The upstream source makes use of NOFILE
unconditionalized. As the Hurd doesn't have an arbitrary limit on the
number of open files, this is not defined. But _SC_OPEN_MAX works fine
and returns 1024 (applications can increase this as they want), so I
suggest the below diff. Please forward this upstream, too."
Oliver Elphick
platforms system(2) gets confused unless the signal handler is set to
SIG_DFL, not SIG_IGN. pgstats.c now uses pqsignal() as it should,
not signal(). Also, arrange for the stats collector process to show
a reasonable ID in 'ps', rather than looking like a postmaster.
that call is not needed to prepare for SO_PEERCRED. Also, simplify code
so that #ifdef SO_PEERCRED appears in only one place, to make it easier
to support other platforms with variants of this capability.
points out how silly it is to use Autoconf to test for a preprocessor
symbol, when one can equally easily #ifdef on the symbol itself.
Accordingly, revert configure to prior state and do it that way.
system supports SO_PEERCRED requests for Unix sockets. This is an
amalgamation of patches submitted by Helge Bahmann and Oliver Elphick,
with some editorializing by yours truly.
number in the data structure so that we can give at least a minimally
useful idea of where the mistake is when we issue syntax error messages.
Move the ClientAuthentication() call to where it should have been in
the first place, so that postmaster memory releasing can happen in a
reasonable place also. Update obsolete comments, correct one real bug
(auth_argument was not picked up correctly).
more care with resjunk tlist entries than it was doing. The original
coding ignored resjunk entries entirely, but a resjunk entry that is
in either the distinctClause or sortClause lists indicates that DISTINCT
ON was used. It's important for ruleutils.c to get this right, else we
may dump views using DISTINCT ON incorrectly.
has a DISTINCT ON clause, per bug report from Anthony Wood. While at it,
improve the DISTINCT-ON-clause recognizer routine to not be fooled by out-
of-order DISTINCT lists.
rather than deleting them only to have to create more. Steady state
is 2*CHECKPOINT_SEGMENTS + WAL_FILES + 1 segment files, which will
simply be renamed rather than constantly deleted and recreated.
To make this safe, added current XLOG file/offset number to page
header of XLOG pages, so that an un-overwritten page from an old
incarnation of a logfile can be reliably told from a valid page.
This change means that if you try to restart postmaster in a CVS-tip
database after installing the change, you'll get a complaint about
bad XLOG page magic number. If you don't want to initdb, run
contrib/pg_resetxlog (and be sure you shut down the old postmaster
cleanly).
in GetSnapshotData, GetNewTransactionId, CommitTransaction, AbortTransaction,
etc. Correct race condition in transaction status testing in
HeapTupleSatisfiesVacuum --- this wasn't important for old VACUUM with
exclusive lock on its table, but it sure is important now. All per
pghackers discussion 7/11/01 and 7/12/01.
Note: I didn't force an initdb, figuring that one today was enough.
However, there is a new function in pg_proc.h, and pg_dump won't be
able to dump partial indexes until you add that function.
per previous discussion on pghackers. Most of the duplicate code in
different AMs' ambuild routines has been moved out to a common routine
in index.c; this means that all index types now do the right things about
inserting recently-dead tuples, etc. (I also removed support for EXTEND
INDEX in the ambuild routines, since that's about to go away anyway, and
it cluttered the code a lot.) The retail indextuple deletion routines have
been replaced by a "bulk delete" routine in which the indexscan is inside
the access method. I haven't pushed this change as far as it should go yet,
but it should allow considerable simplification of the internal bookkeeping
for deletions. Also, add flag columns to pg_am to eliminate various
hardcoded tests on AM OIDs, and remove unused pg_am columns.
Fix rtree and gist index types to not attempt to store NULLs; before this,
gist usually crashed, while rtree managed not to crash but computed wacko
bounding boxes for NULL entries (which might have had something to do with
the performance problems we've heard about occasionally).
Add AtEOXact routines to hash, rtree, and gist, all of which have static
state that needs to be reset after an error. We discovered this need long
ago for btree, but missed the other guys.
Oh, one more thing: concurrent VACUUM is now the default.
validity checking rules for VACUUM. Make some other rearrangements of the
VACUUM code to allow more code to be shared between full and lazy VACUUM.
Minor code cleanups and added comments for TransactionId manipulations.
a lie on many Unixen), invoke listen() with MIN(MaxBackends*2, 10000).
The clamp value 10000 is configurable in config.h.in, if that proves
to be necessary --- hopefully it won't.
This makes VACUUM work properly with partial indexes, and avoids memory
leakage with functional indexes. Also, suppress complaint about fewer
index tuples than heap tuples when the index is a partial index.
From Martijn van Oosterhout.
USER and ALTER USER to appear in any order, not only the fixed order
they used to be required to appear in.
Also, some changes from Tom Lane to create a FULL option for VACUUM;
it doesn't do anything yet, but I needed to change many of the same
files to make that happen, so now seemed like a good time.
in cases of qualified rules as well as unqualified ones. Tweak rules
test to avoid cluttering output with dummy SELECT results. Update
documentation to match code.
constraint. This case (a) is useless, (b) violates SQL92, and
(c) is certain to cause a failure downstream when we try to create
an index with duplicated column names. So give an appropriate error
message instead of letting the index failure occur. Per report from
Colin Strickland. NOTE: currently, CREATE INDEX fooi ON foo(f1,f1)
still fails with 'cannot insert duplicate key' error. Should we
change that too? What about functional indexes?
useful as yet, since its primary source of information is (full) VACUUM,
which makes a concerted effort to get rid of free space before telling
the map about it ... next stop is concurrent VACUUM ...
immediately, we will fork a child even if the database state does not
permit connections to be accepted (eg, we are in recovery mode).
The child process will correctly reject the connection and exit as
soon as it's finished collecting the connection request message.
However, this means that reaper() must be prepared to see child
process exit signals even while it's waiting for startup or shutdown
process to finish. As was, a connection request arriving during a
database recovery or shutdown would cause postmaster abort.
stub) into the rest of the system. Adopt a cleaner approach to preventing
deadlock in concurrent heap_updates: allow RelationGetBufferForTuple to
select any page of the rel, and put the onus on it to lock both buffers
in a consistent order. Remove no-longer-needed isExtend hack from
API of ReleaseAndReadBuffer.
have any newly-dead tuples on them. This is a longstanding deficiency
that prevents VACUUM from compacting a file as much as one would expect.
Change requires fixing repair_frag to not assume that fraged_pages is
a subset of vacuum_pages.
Also make some further cleanups of places that assumed page numbers fit
in int and tuple counts fit in uint32.
do anything yet, but it has the necessary connections to initialization
and so forth. Make some gestures towards allowing number of blocks in
a relation to be BlockNumber, ie, unsigned int, rather than signed int.
(I doubt I got all the places that are sloppy about it, yet.) On the
way, replace the hardwired NLOCKS_PER_XACT fudge factor with a GUC
variable.
IS TRUE, etc, with some degree of verisimilitude. Split out
selectivity support functions from builtins.h into a new header
file selfuncs.h, so as to reduce the number of header files builtins.h
must depend on. Fix a few missing inclusions exposed thereby.
From Joe Conway, with some kibitzing from Tom Lane.
> > secure_ctx changes too. it will be PGC_BACKEND after '-p'.
>
> Oh, okay, I missed that part. Could we see the total state of the
> patch --- ie, a diff against current CVS, not a bunch of deltas?
> I've gotten confused about what's in and what's out.
Ok, here it is. Cleared the ctx comment too - after -p
it will be PGC_BACKEND in any case.
Marko Kreen
a new postmaster child process. This should eliminate problems with
authentication blocking (e.g., ident, SSL init) and also reduce problems
with the accept queue filling up under heavy load.
The option to send elog output to a different file per backend (postgres -o)
has been disabled for now because the initialization would have to happen
in a different order and it's not clear we want to keep this anyway.
tests to return the correct results per SQL9x when given NULL inputs.
Reimplement these tests as well as IS [NOT] NULL to have their own
expression node types, instead of depending on special functions.
From Joe Conway, with a little help from Tom Lane.
SI messages now include the relevant database OID, so that operations
in one database do not cause useless cache flushes in backends attached
to other databases. Declare SI messages properly using a union, to
eliminate the former assumption that Oid is the same size as int or Index.
Rewrite the nearly-unreadable code in inval.c, and document it better.
Arrange for catcache flushes at end of command/transaction to happen before
relcache flushes do --- this avoids loading a new tuple into the catcache
while setting up new relcache entry, only to have it be flushed again
immediately.
Here is Tomified version of my 2 pending patches.
Dropped the set_.._real change as it is not needed.
Desc would be:
* use GUC for settings from cmdline
Marko Kreen
CatalogCacheFlushRelation (formerly called SystemCacheRelationFlushed)
how to distinguish tuples it should flush from those it needn't; this
means a relcache flush event now only removes the catcache entries
it ought to, rather than zapping the caches completely as it used to.
Testing with the regression tests indicates that this considerably
improves the lifespan of catcache entries. Also, rearrange catcache
data structures so that the limit on number of cached tuples applies
globally across all the catcaches, rather than being per-catcache.
It was a little silly to have the same size limit on both, say,
pg_attribute caches and pg_am caches (there being only four possible
rows in the latter...). Doing LRU removal across all the caches
instead of locally in each one should reduce cache reload traffic
in the more heavily used caches and improve the efficiency of
cache memory use.
TopTransactionContext, rather than using Dllist. This simplifies and
speeds up the code, and eliminates a former risk of coredump when
out of memory (since the old code didn't bother to check for malloc
failure). It also moves us one step closer to retiring Dllist...
detected sooner in backend startup, and is treated as an expected error
(it gives 'Sorry, too many clients already' now). This allows us not
to have to enforce the MaxBackends limit exactly in the postmaster.
Also, remove ProcRemove() and fold its functionality into ProcKill().
There's no good reason for a backend not to be responsible for removing
its PROC entry, and there are lots of good reasons for the postmaster
not to be touching shared-memory data structures.
rules and triggers by OID. So, even though we have no cross-references
in the system catalogs to pg_rewrite.oid or pg_trigger.oid, we'd better
have unique indexes on them. Put back pg_rewrite_oid_index, which I
mistakenly removed a few days ago, and add pg_trigger_oid_index.
Tom Lane). For the moment, only the OID/name variants are provided.
I didn't force initdb, but the additions to the 'privileges' regress
test won't pass until you do one.
database, including system catalogs (but not the shared catalogs,
since they don't really belong to his database). This is per recent
mailing list discussion. Clean up some other code that also checks
for database ownerness by introducing a test function is_dbadmin().
inet(text), cidr(text): convert a text value into inet/cidr
set_masklen(inet): set masklen on the inet value
Patch also contains regression checks for these functions.
Alex Pilosov
datatypes, not only strings. parse_hook is useless for bool, I suppose,
but it seems possibly useful for int and double to apply variable-specific
constraints that are more complex than simple range limits. assign_hook
is definitely useful for all datatypes --- we need it right now for bool
to support date cache reset when changing Australian timezone rule setting.
Also, clean up some residual problems with the reset all/show all patch,
including memory leaks and mistaken reset of PostPortNumber. It seems
best that RESET ALL not touch variables that don't have SUSET or
USERSET context.
manipulation of rtable/jointree by planner. Rewriter was generating
actions that shared rtable/jointree substructure, which caused havoc
when planner got to the later actions that it'd already mucked up.
It "make"s and "make check"s clean against current cvs tip.
There are now both Text and Name variants, and the regression test support
is rolled into the patch. Note that to be complete wrt Name based variants,
there are now 12 user visible versions of has_table_privilege:
has_table_privilege(Text usename, Text relname, Text priv_type)
has_table_privilege(Text usename, Name relname, Text priv_type)
has_table_privilege(Name usename, Text relname, Text priv_type)
has_table_privilege(Name usename, Name relname, Text priv_type)
has_table_privilege(Text relname, Text priv_type) /* assumes current_user */
has_table_privilege(Name relname, Text priv_type) /* assumes current_user */
has_table_privilege(Text usename, Oid reloid, Text priv_type)
has_table_privilege(Name usename, Oid reloid, Text priv_type)
has_table_privilege(Oid reloid, Text priv_type) /* assumes current_user */
has_table_privilege(Oid usesysid, Text relname, Text priv_type)
has_table_privilege(Oid usesysid, Name relname, Text priv_type)
has_table_privilege(Oid usesysid, Oid reloid, Text priv_type)
For the Text based inputs, a new internal function, get_Name is used
(shamelessly copied from get_seq_name in sequence.c) to downcase if not
quoted, or remove quotes if quoted, and truncate. I also added a few test
cases for the downcasing, quote removal, and Name based variants to the
regression test.
Joe Conway
pg_database now has unique indexes on oid and on datname.
pg_shadow now has unique indexes on usename and on usesysid.
pg_am now has unique index on oid.
pg_opclass now has unique index on oid.
pg_amproc now has unique index on amid+amopclaid+amprocnum.
Remove pg_rewrite's unnecessary index on oid, delete unused RULEOID syscache.
Remove index on pg_listener and associated syscache for performance reasons
(caching rows that are certain to change before you need 'em again is
rather pointless).
Change pg_attrdef's nonunique index on adrelid into a unique index on
adrelid+adnum.
Fix various incorrect settings of pg_class.relisshared, make that the
primary reference point for whether a relation is shared or not.
IsSharedSystemRelationName() is now only consulted to initialize relisshared
during initial creation of tables and indexes. In theory we might now
support shared user relations, though it's not clear how one would get
entries for them into pg_class &etc of multiple databases.
Fix recently reported bug that pg_attribute rows created for an index all have
the same OID. (Proof that non-unique OID doesn't matter unless it's
actually used to do lookups ;-))
There's no need to treat pg_trigger, pg_attrdef, pg_relcheck as bootstrap
relations. Convert them into plain system catalogs without hardwired
entries in pg_class and friends.
Unify global.bki and template1.bki into a single init script postgres.bki,
since the alleged distinction between them was misleading and pointless.
Not to mention that it didn't work for setting up indexes on shared
system relations.
Rationalize locking of pg_shadow, pg_group, pg_attrdef (no need to use
AccessExclusiveLock where ExclusiveLock or even RowExclusiveLock will do).
Also, hold locks until transaction commit where necessary.
directory (which can be made a symlink to put temp files on another disk).
Add code to delete leftover temp files during postmaster startup.
Bruce, with some kibitzing from Tom.
should be computed from total number of distinct values in whole
relation, not # distinct values we expect to have after restriction
clauses are applied.
for GRANT/REVOKE is now just that, not "CHANGE".
On the way, migrate some of the aclitem internal representation away from
the parser and build a real parse tree instead. Also add some 'const'
qualifiers.
appropriate pin-count manipulation, and instead use ReleaseAndReadBuffer.
Make use of the fact that the passed-in buffer (if there is one) must
be pinned to avoid grabbing the bufmgr spinlock when we are able to
return this same buffer. Eliminate unnecessary 'previous tuple' and
'next tuple' fields of HeapScanDesc and IndexScanDesc, thereby removing
a whole lot of bookkeeping from heap_getnext() and related routines.
checkpoint's redo pointer, not its undo pointer, per discussion in
pghackers a few days ago. No point in hanging onto undo information
until we have the ability to do something with it --- and this solves
a rather large problem with log space for long-running transactions.
Also, change all calls of write() to detect the case where write
returned a count less than requested, but failed to set errno.
Presume that this situation indicates ENOSPC, and give the appropriate
error message, rather than a random message associated with the previous
value of errno.
copy PUBLIC access rights into each newly created ACL entry. Instead
treat each ACL entry as independent flags. Also clean up some ugliness
in acl.h API.
WHERE (a = 1 or a = 2) and b = 42
and an index on (a,b), include the clause b = 42 in the indexquals
generated for each arm of the OR clause. Essentially this is an index-
driven conversion from CNF to DNF. Implementation is a bit klugy, but
better than not exploiting the extra quals at all ...
of costsize.c routines to pass Query root, so that costsize can figure
more things out by itself and not be so dependent on its callers to tell
it everything it needs to know. Use selectivity of hash or merge clause
to estimate number of tuples processed internally in these joins
(this is more useful than it would've been before, since eqjoinsel is
somewhat more accurate than before).
conditional rules (rules with WHERE clauses). We cannot support these
since there's noplace to hang a condition on a utility statement.
We caught the other case (attempt to attach a condition at rewrite time)
awhile ago, but this one escaped notice until now.
(vs. at the end of a normal sort). This ensures that explicit sorts
yield the same ordering as a btree index scan. To be really sure that
that equivalence holds, we use the btree entries in pg_amop to decide
whether we are looking at a '<' or '>' operator. For a sort operator
that has no btree association, we put the nulls at the front if the
operator is named '>' ... pretty grotty, but it does the right thing in
simple ASC and DESC cases, and at least there's no possibility of getting
a different answer depending on the plan type chosen.
Use --enable-nls to turn it on; see installation instructions for details.
See developer's guide how to make use of it in programs and how to add
translations.
psql sources have been almost fully prepared and an incomplete German
translation has been provided. In the backend, only elog() calls are
currently translatable, and the provided German translation file is more
of a placeholder.
given values that compare as unordered, make sure we reply that they
are equal, which is better than giving an arbitrary answer --- at least
it doesn't depend on which one is passed as which arg.
right, but it failed to get the padding case right.
This was obscured by subsequent application of bpchar() in all but one
regression test case, and that one didn't fail in an obvious way ---
trailing blanks are hard to see. Add another test case to make it
more obvious if it breaks again.
calls. This has never actually cached anything, because postgres.c does
each fastpath call as a separate transaction command, and so fastpath.c
would always decide that its cache was outdated. If it had worked, it
would now be failing for calls of oldstyle functions due to dangling
pointers in the FmgrInfo struct. Rip it out for simplicity and bug-
proofing.
report on old-style functions invoked by RI triggers. We had a number of
other places that were being sloppy about which memory context FmgrInfo
subsidiary data will be allocated in. Turns out none of them actually
cause a problem in 7.1, but this is for arcane reasons such as the fact
that old-style triggers aren't supported anyway. To avoid getting burnt
later, I've restructured the trigger support so that we don't keep trigger
FmgrInfo structs in relcache memory. Some other related cleanups too:
it's not really necessary to call fmgr_info at all while setting up
the index support info in relcache entries, because those ScanKeyEntry
structs are never used to invoke the functions. This should speed up
relcache initialization a tiny bit.
because cached fmgr info contained reference to a shorter-lived data
structure. Also guard against possibility that fmgr_info could fail,
leaving an incomplete entry present in the hash table.
when added by alter table add constraint. The first file
patches backend/commands/command.c and the latter is a patch
to the alter table regression test.
Stephan Szabo
basically want your guys feedback. I have sprinkled some of my q's thru
the text delimited with the @@ symbol. It seems to work perfectly.
[ Removed @@ comments because patch was reviewed. ]
At the moment it does CHECK constraints only, with inheritance. However,
due to the problem mentioned before with the mismatching between inherited
constraints it may be wise to disable the inheritance feature for a while.
it is written in an extensible fashion to support future dropping of other
types of constraint, and is well documented.
Please send me your comments, check my use of locking, updating of
indices, use of ERROR and NOTICE, etc. and I will rework the patch based
on feedback until everyone
is happy with it...
Christopher Kings
from an empty text string. This makes them consistent with the de facto
behavior of type char's I/O conversion functions, and avoids generating
text values with embedded nulls, which confuse many text operators.
the same tuple slot that the raw tuple came from, because that slot has
the wrong tuple descriptor. Store it into its own slot with the correct
descriptor, instead. This repairs problems with SPI functions seeing
inappropriate tuple descriptors --- for example, plpgsql code failing to
cope with SELECT FOR UPDATE.
Python) to support shared extension modules, I have learned that Guido
prefers the style of the attached patch to solve the above problem.
I feel that this solution is particularly appropriate in this case
because the following:
PglargeType
PgType
PgQueryType
are already being handled in the way that I am proposing for PgSourceType.
Jason Tishler
it does not support 64bit integers. AFAIK that's the default data type for
OIDs, so I am not surprised that this does not work. Use gcc instead.
BTW., 7.1 does not compile as is with gcc either, I believed the
required patches made it into the 7.1.1 release but obviously I missed
the deadline.
Since the ports mailing list does not seem to be archived I have attached
a copy of the patch (for 7.1 and 7.1.1).
I've just performed a build of a Watcom compiled version and found a couple
of bugs in the watcom specific part of that patch. Please use the attached
version instead.
Tegge, Bernd
to do that, but inconsistently.) Make bit type reject too short input,
too, per SQL. Since it no longer zero pads, 'zpbit*' has been renamed to
'bit*' in the source, hence initdb.
- New functions to create a portal using a prepared/saved
SPI plan or lookup an existing portal by name.
- Functions to fetch/move from/in portals. Results are placed
in the usual SPI_processed and SPI_tuptable, so the entire
set of utility functions can be used to gain attribute access.
- Prepared/saved SPI plans now use their own memory context
and SPI_freeplan(plan) can remove them.
- Tuple result sets (SPI_tuptable) now uses it's own memory
context and can be free'd by SPI_freetuptable(tuptab).
Enhancement of PL/pgSQL
- Uses generic named portals internally in FOR ... SELECT
loops to avoid running out of memory on huge result sets.
- Support for CURSOR and REFCURSOR syntax using the new SPI
functionality. Cursors used internally only need no explicit
transaction block. Refcursor variables can be used inside
of explicit transaction block to pass cursors between main
application and functions.
Jan
create_index_paths are not immediately discarded, but are available for
subsequent planner work. This allows avoiding redundant syscache lookups
in several places. Change interface to operator selectivity estimation
procedures to allow faster and more flexible estimation.
Initdb forced due to change of pg_proc entries for selectivity functions!
/*
* parse function
* This code is confusing because the database can accept
* relation.column, column.function, or relation.column.function.
* In these cases, funcname is the last parameter, and fargs are
* the rest.
*
* It can also be called as func(col) or func(col,col).
* In this case, Funcname is the part before parens, and fargs
* are the part in parens.
*
*/
Node *
ParseFuncOrColumn(ParseState *pstate, char *funcname, List *fargs,
bool agg_star, bool agg_distinct,
int precedence)
PageGetFreeSpace() was being called while not holding the buffer lock, which
not only could yield a garbage answer, but even if it's the right answer there
might be less space available after we reacquire the buffer lock.
Also repair potential deadlock introduced by my recent performance improvement
in RelationGetBufferForTuple(): it was possible for two heap_updates to try to
lock two buffers in opposite orders. The fix creates a global rule that
buffers of a single heap relation should be locked in decreasing block number
order. Currently, this only applies to heap_update; VACUUM can get away with
ignoring the rule since it holds exclusive lock on the whole relation anyway.
However, if we try to implement a VACUUM that can run in parallel with other
transactions, VACUUM will also have to obey the lock order rule.
with many NULLs ( inserting of NULL into indexed field cause
ERROR: MemoryContextAlloc: invalid request size)
As a workaround 'vacuum analyze' could be used.
This patch resolves the problem, please upply to 7.1.1 sources and
current cvs tree.
Oleg Bartunov
trees (mostly my fault). Repair. Also fix long-standing bug in ExecReplace:
after recomputing a concurrently updated tuple, we must recheck constraints.
Make EvalPlanQual leak memory with somewhat less enthusiasm than before,
although plugging leaks fully will require more changes than I care to risk
in a dot-release.
when we need to move to a new page; as long as we can insert the new
tuple on the same page as before, we only need LockBuffer and not the
expensive stuff. Also, twiddle bufmgr interfaces to avoid redundant
lseeks in RelationGetBufferForTuple and BufferAlloc. Successive inserts
now require one lseek per page added, rather than one per tuple with
several additional ones at each page boundary as happened before.
Lock contention when multiple backends are inserting in same table
is also greatly reduced.
not being consulted anywhere, so remove it and remove the _mdnblocks()
calls that were used to set it. Change smgrextend interface to pass in
the target block number (ie, current file length) --- the caller always
knows this already, having already done smgrnblocks(), so it's silly to
do it over again inside mdextend. Net result: extension of a file now
takes one lseek(SEEK_END) and a write(), not three lseeks and a write.
constraint names.
> > A reasonable interpretation of DROP CONSTRAINT "foo" is to drop *all*
> > constraints named "foo" on the target table.
>
> Then it should probably be a good thing to avoid the automatic
> generation of
> duplicate names? I might take a look at that, actually...
>
Christopher Kings-Lynne
in referencing and referenced columns of an fk constraint
aren't comparable using '=' at constraint definition time
rather than insert/update time.
Stephan Szabo
collected by ANALYZE. Also, add some modest amount of intelligence to
guesses that are used for varlena columns in the absence of any ANALYZE
statistics. The 'width' reported by EXPLAIN is finally something less
than totally bogus for varlena columns ... and, in consequence, hashjoin
estimating should be a little better ...
to their children, leading to misbehavior if they had any children that paid
attention to chgParam (most plan node types don't). Append's bug has been
there a long time, but nobody had noticed because it used to be difficult
to create a query where an Append would be used below the top level of a
plan; so there were never any parameters getting passed down. SubqueryScan
is new in 7.1 ... and I'd modeled its behavior on Append :-(
> cronjob:
> NOTICE: RegisterSharedInvalid: SI buffer overflow
> NOTICE: InvalidateSharedInvalid: cache state reset
> I don't understand what these mean. Should I be concerned about them
> and what do they signify?
No real need to worry. Those should've been downgraded to DEBUG-level
messages a release or two back, but nobody bothered...
Tom Lane
a separate statement (though it can still be invoked as part of VACUUM, too).
pg_statistic redesigned to be more flexible about what statistics are
stored. ANALYZE now collects a list of several of the most common values,
not just one, plus a histogram (not just the min and max values). Random
sampling is used to make the process reasonably fast even on very large
tables. The number of values and histogram bins collected is now
user-settable via an ALTER TABLE command.
There is more still to do; the new stats are not being used everywhere
they could be in the planner. But the remaining changes for this project
should be localized, and the behavior is already better than before.
A not-very-related change is that sorting now makes use of btree comparison
routines if it can find one, rather than invoking '<' twice.
routine DetermineLocalTimeZone(). In that routine, be more wary of
broken mktime() implementations than the original code was: don't allow
mktime to change the already-set y/m/d/h/m/s information, and don't
use tm_gmtoff if mktime failed. Possibly this will resolve some of
the complaints we've been hearing from users of Middle Eastern timezones
on RedHat.
give consistent results for all datatypes. Types float4, float8, and
numeric were broken for NaN values; abstime, timestamp, and interval
were broken for INVALID values; timetz was just plain broken (some
possible pairs of values were neither < nor = nor >). Also clean up
text, bpchar, varchar, and bit/varbit to eliminate duplicate code and
thereby reduce the probability of similar inconsistencies arising in
the future.
This is an extension to the SQL9x standard, but is consistant with usage
of the underlying date_part() function used to implement it.
Example: EXTRACT('YEAR',...)
No impact on regression tests.
join. This is needed to avoid improper evaluation of expressions that
should be nulled out, as in Victor Wagner's bug report of 4/27/01.
Pretty ugly solution, but no time to do anything better for 7.1.1.
function arguments in join queries: copy the tuples into
TransactionCommandContext so they don't get recycled too soon. This is
horrid, but not any worse than 7.0 or before, which also leaked such
tuples until end of query. A proper fix will require allowing tuple
datums to be physically stored inside larger tuple datums, which opens
up a bunch of issues that can't realistically be solved for 7.1.1.
functions of join or subselect aliases. It'd be awfully nice if this
code knew for sure whether it was dealing with 'x.f' or 'f(x)' syntax;
maybe we can fix that in a future cycle.
or view that's been dropped and then recreated with the same name (but,
perhaps, different columns). Eventually we'd like to support this but
for now all we can do is fail cleanly, rather than possibly coredumping
if we proceed using the obsolete rule.
to specific base or join RelOptInfo nodes during planning. This preserves
the more-intuitive behavior of 7.0.* --- if you write an expensive clause
(such as a sub-select) last, it should get evaluated last. Someday we
ought to try to have some intelligence about the order of evaluation of
WHERE clauses, but for now we should not override what the user wrote.
only possible failure is in pq_flush, which will log a (better!) report
anyway --- so pq_endmessage is just cluttering the log with a redundant
entry. This matters when a client crashes partway through a large query,
since we will emit many broken-pipe reports before finishing the query
and exiting.
lists should be reverse-compiled into targetlist index numbers, because
that's the only interpretation the parser allows for a constant in these
clauses. (Ergo, the only way they could have gotten into the list in
the first place is to have come from the targetlist; so this should always
work.) Per problem report from Peter E.
join clauses. The mergejoin executor wants all the join clauses to appear
as merge quals, not as extra joinquals, for these kinds of joins. But the
planner would consider plans in which partially-sorted input paths were
used, leading to only some of the join clauses becoming merge quals.
This is fine for inner/left joins, not fine for right/full joins.
Although it was now using the right equation, it was making bogus choices
of the precision to compute intermediate results to. I'm not sure this
is really right even yet, but it's better than before ...
VFD entries. On platforms where dereferencing a null pointer doesn't
lead to coredump, it's possible that this omission could have led to
unpleasant behavior like deleting the wrong file.
physical file has disappeared. There is no really good reason why
relcache should be opening the underlying file at all, AFAICS.
In any case we needn't raise a hard error here.
with different default values, unless the child table redeclares the
column with an explicit default. This was judged to be the approach
least likely to cause unpleasant surprises.
in CREATE TABLE, but give a warning notice. Clean up inconsistent
handling of defaults and NOT NULL flags from multiply-inherited columns.
Per pghackers discussion 28-Mar through 30-Mar.
inheritance query: make duplicate copies of subplans in adjust_inherited_attrs.
When we redesign querytrees we really gotta do something about this
issue of whether querytrees are read-only and can share substructure
or not.
more recent versions of the IBM C++ compiler (now called VisualAge C++).
The C++ part was previously broken (g++ and xlC), thus this is zero risk.
Only AIX specific parts are touched (1 Makefile.shlib line (link with $(COMPILER
) instead
of $(CC) and one shell script line (parameter -C to nm to not demangle C++ symbo
ls for
.exp file)).
I thus ask you to please apply this patch before release.
With or without this patch RC1 on AIX 4.3.2 RS6000 passes "gmake check" for both
the native
compiler vac.C 5.0.1 and gcc 2.95.2 :-)
Andreas
accepts nnnLL syntax for long long constants. If so, decorate the CRC64
constants with LL to avoid warnings and/or erroneous results from certain
non-standards-compliant compilers.
on Alpha (because parser mistakenly assumes that a nonoverflow result
from strtol means the value will fit into int4). A scan for other uses
of strtol and strtoul found a couple other places with the same mistake;
fix them too. The changes are all conditional on HAVE_LONG_INT_64 to
avoid complaints from compilers that think x != x is a silly test
(cf. pg_atoi).
*before* acquiring shlock on buffer context. This way we should be
protected against conflicts with FlushRelationBuffers.
(Seems we never do excl lock and then StartBufferIO for the same
buffer, so there should be no deadlock here, - but we'd better
check this very soon).
O_SYNC, or O_DSYNC (as available on a given platform). Add GUC parameter
to control sync method.
Also, add defense to XLogWrite to prevent it from going nuts if passed
a target write position that's past the end of the buffers so far filled
by XLogInsert.
I'm not sure that it's really necessary to save insert events when there
are only after update or delete triggers, but certainly it's wrong for
COPY to behave differently from an INSERT query.
detect case that next page in log came from an older run than the prior
page. This avoids the necessity to re-zero the log after recovery from
a crash, which is good because we need not risk destroying valuable log
information.
This forces another initdb since yesterday :-(. Need to get that log
reset utility done...
* Store two past checkpoint locations, not just one, in pg_control.
On startup, we fall back to the older checkpoint if the newer one
is unreadable. Also, a physical copy of the newest checkpoint record
is kept in pg_control for possible use in disaster recovery (ie,
complete loss of pg_xlog). Also add a version number for pg_control
itself. Remove archdir from pg_control; it ought to be a GUC
parameter, not a special case (not that it's implemented yet anyway).
* Suppress successive checkpoint records when nothing has been entered
in the WAL log since the last one. This is not so much to avoid I/O
as to make it actually useful to keep track of the last two
checkpoints. If the things are right next to each other then there's
not a lot of redundancy gained...
* Change CRC scheme to a true 64-bit CRC, not a pair of 32-bit CRCs
on alternate bytes. Polynomial borrowed from ECMA DLT1 standard.
* Fix XLOG record length handling so that it will work at BLCKSZ = 32k.
* Change XID allocation to work more like OID allocation. (This is of
dubious necessity, but I think it's a good idea anyway.)
* Fix a number of minor bugs, such as off-by-one logic for XLOG file
wraparound at the 4 gig mark.
* Add documentation and clean up some coding infelicities; move file
format declarations out to include files where planned contrib
utilities can get at them.
* Checkpoint will now occur every CHECKPOINT_SEGMENTS log segments or
every CHECKPOINT_TIMEOUT seconds, whichever comes first. It is also
possible to force a checkpoint by sending SIGUSR1 to the postmaster
(undocumented feature...)
* Defend against kill -9 postmaster by storing shmem block's key and ID
in postmaster.pid lockfile, and checking at startup to ensure that no
processes are still connected to old shmem block (if it still exists).
* Switch backends to accept SIGQUIT rather than SIGUSR1 for emergency
stop, for symmetry with postmaster and xlog utilities. Clean up signal
handling in bootstrap.c so that xlog utilities launched by postmaster
will react to signals better.
* Standalone bootstrap now grabs lockfile in target directory, as added
insurance against running it in parallel with live postmaster.
tuples inserted/deleted/updated in a single transaction. On my machine,
this reduced the time to delete 80000 tuples in a foreign-key-referencing
table from ~15min to ~8sec.