its presence. This amounts to desupporting Kerberos 5 releases 1.0.*,
which is small loss, and simplifies use of our Kerberos code on platforms
with Red-Hat-style include file layouts. Per gripe from John Gray and
followup discussion.
advancing ActiveSnapshot when we are inside a volatile function.
Per example from Gaetano Mendola. Add a regression test to catch
similar problems in future.
after an unknown or failed psql backslash command, and also while
discarding "extra" arguments of a putatively valid backslash command.
In the case of an unknown/failed command, make sure we discard the
whole rest of the line, rather than trying to resume at the next
backslash. Per discussion with Thomer Gil.
several reports of users being confused when they attempt to use ELSEIF
and run into trouble due to PL/PgSQL's lax parser. The parser will be
improved for 8.1, but we can fix most of the problem by allowing ELSEIF
for now.
silently ignored, allowing one to write bizarre things like
DECLARE x setof int;
in plpgsql. This has misled at least one novice into thinking that
plpgsql variables could be sets ...
thought there couldn't be any, but the folly of this was exposed by an
example from andrew@supernews.com 5-Dec-2004. The patch applies the
identical logic already used for table constraints and defaults to ON
SELECT rules, so I have reasonable confidence in it even though it might
look like complicated logic.
be emitted too soon. The previous code got this right in the case where
the CHECK was emitted as a separate ALTER TABLE command, but not in the
case where the CHECK is emitted right in CREATE TABLE. Per report from
Slawomir Sudnik.
Note: this code is pretty ugly; it'd perhaps be better to treat comments
as independently sortable dump objects. That'd be much too invasive a
change for RC time though.
had to do in DECLARE CURSOR. AFAICS these are all the places affected.
PREPARE case per example from Michael Fuhr, EXPLAIN case located by
grepping for planner calls ...
(rd_att) field of a nailed-in-cache relcache entry. This fixes the bug
reported by Alvaro 8-Dec-2004; I believe it probably also explains
Grant Finnemore's report of 10-Sep-2004.
In an unrelated change in the same file, put back 7.4's response to
failure to rename() the relcache init file, ie, unlink the useless
temp file. I did not put back the warning message, since there might
actually be some reason not to have that.
of an inheritance child table is binary-compatible with the rowtype of
its parent, invent an expression node type that does the conversion
correctly. Fixes the new bug exhibited by Kris Shannon as well as a
lot of old bugs that would only show up when using multiple inheritance
or after altering the parent table.
better make sure the sort order is totally specified; else we get burnt
by platform-specific behavior of qsort() with equal keys. Per buildfarm
results.
is null-terminated. I think this is not a real bug because the parser
would always have truncated the identifier to NAMEDATALEN-1 already,
but let's be safe. Per report from Klocwork.
> throughout to the spellings suggested by your book.
Great.
A follow-up patch for current CVS HEAD is attached, and available at
http://troels.arvin.dk/db/pgsql/conformance/pgsql-sql-conformance-
followup.patch
The patch
- includes a core feature ID that had been left
out by mistake (C011)
- updates the sql_feature_packages.txt table to
reflect changes in SQL:2003 which were not
covered properly in my last patch
Troels Arvin
> seconds to 10 seconds. The original number was plucked from thin air
> some months ago, and I'd like to review that now based upon further
> thought, observation and experience.
>
> This change has little or no effect on performance, since the interval
> is there mainly to avoid repeated respawn attempts if archiver fails at
> startup. Archiver start-up time is very quick, so there is little danger
> of exceeding 10 seconds.
>
> On a busy system, if the archiver does die, then many files can build up
> in the 60 seconds before respawning. That xlog file backlog could take
> some time to clear. This then leaves a larger than normal window of data
> loss for a possibly long period.
>
> It's a minor change only, with no other effect on function.
Simon Riggs
the "ps" argument list on Unix - meaning that there is no way to
identify for example the stats processors or the bgwriter.
This patch adds this functionality, in a bit of a crufty way. It creates
a kernel Event object with the name of what would be in the title. This
can be viewed using for example Process Explorer.
It's been very handy for me during both debugging and using. I haven't
figured a better way, but perhaps someone has one that's less crufty? If
not, here is at least a working patch :-)
Magnus Hagander
reasons I outlined in pghackers a few days ago.
Also, undo someone's overly optimistic decision to reduce tuple state
checks from if (...) elog() to Asserts. If I trusted this code more,
I might think it was a good idea to disable these checks in production
installations. But I don't.
escapes --- they aren't simply quoted characters. Problem noted by
Antti Salmela. Also fix problem with incorrect handling of multibyte
characters when followed by a quantifier.
In particular, there was a mathematical tie between the two possible
nestloop-with-materialized-inner-scan plans for a join (ie, we computed
the same cost with either input on the inside), resulting in a roundoff
error driven choice, if the relations were both small enough to fit in
sort_mem. Add a small cost factor to ensure we prefer materializing the
smaller input. This changes several regression test plans, but with any
luck we will now have more stability across platforms.
a relation's number of blocks, rather than the possibly-obsolete value
in pg_class.relpages. Scale the value in pg_class.reltuples correspondingly
to arrive at a hopefully more accurate number of rows. When pg_class
contains 0/0, estimate a tuple width from the column datatypes and divide
that into current file size to estimate number of rows. This improved
methodology allows us to jettison the ancient hacks that put bogus default
values into pg_class when a table is first created. Also, per a suggestion
from Simon, make VACUUM (but not VACUUM FULL or ANALYZE) adjust the value
it puts into pg_class.reltuples to try to represent the mean tuple density
instead of the minimal density that actually prevails just after VACUUM.
These changes alter the plans selected for certain regression tests, so
update the expected files accordingly. (I removed join_1.out because
it's not clear if it still applies; we can add back any variant versions
as they are shown to be needed.)
useful than just \'failed\' when there's a problem. Per gripe from
Chris Albertson.
In an unrelated change, use VACUUM FULL; VACUUM FREEZE; rather than
a single VACUUM FULL FREEZE command, to respond to my worries of a
couple days ago about the reliability of doing this in one go.
/*
* Some compilers with throw a warning knowing this test can never be
* true because off_t can't exceed the compared maximum.
*/
if (th->fileLen > MAX_TAR_MEMBER_FILELEN)
die_horribly(AH, modulename, "archive member too large for tar format\n");
prevents problems when the DECLARE is in a portal and is executed
repeatedly, as is possible in v3 protocol. Per analysis by Oliver
Jowett, though I didn't use his patch exactly.
error conditions during regexp compile, but not during regexp execution;
any sort of "can't happen" errors would be treated as no-match instead
of being reported as they should be. Noticed while trying to duplicate
a reported Tcl bug.
to be processed by GUC before InitPostgres, because any required lookup
of the encoding conversion function has to be done during InitializeClientEncoding.
So, I broke this last week by moving GUC processing to after InitPostgres :-(.
What we can do as a compromise is process non-SUSET variables during
command line scanning (the same as before), and postpone the processing
of only SUSET variables. None of the SUSET variables need to be set
before InitPostgres.
data returned from Perl. Consolidate multiple bits of code to convert
a Perl hash to a tuple, and drive the conversion off the keys present
in the hash rather than the tuple column names, so we detect error if
the hash contains keys it shouldn't. (This means keys not in the hash
will silently default to NULL, which seems ok to me.) Fix a bunch of
reference-count leaks too.
fill factor has been exceeded. We usually run with ffactor == 1, but
the way the test was coded, it wouldn't split a bucket until the actual
fill factor reached 2.0, because of use of integer division. Change
from > to >= so that it will split more aggressively when the table
starts to get full.
few cycles during transaction exit. A typical session probably
wouldn't have as many as half a dozen portals open at once, so the
original value of 64 seems far larger than needed.
subtransactions quite right either: the ReleaseCurrentSubTransaction
call should occur inside the PG_TRY, so that the proper path is taken
if an error occurs during subtransaction commit. This assumes that
AbortSubTransaction can cope with the state left behind if
CommitSubTransaction fails partway through, but we were already
requiring that.
operations are now run as subtransactions, so that errors in them
can be reported as ordinary Perl or Tcl errors and caught by the
normal error handling convention of those languages. Also do some
minor code cleanup in pltcl.c: extract a large chunk of duplicated
code in pltcl_SPI_execute and pltcl_SPI_execute_plan into a shared
subroutine.
no need for it to be nearly as big as the global hash table, and since
it's not in shared memory it can grow if it does need to be bigger.
By reducing the size, we speed up hash_seq_search(), which saves a
significant fraction of subtransaction entry/exit overhead.
rather than longjmp'ing clear out of Perl and thereby leaving Perl in
a broken state. Also some minor prettification of error messages.
Still need to do something with spi_exec_query() error handling.
to the original List; per report from Sebastian BÎck. I think this is
the last such bug --- I examined every lcons() call in the backend and
the rest seem OK --- but it's nervous-making that we're still finding
'em so many months after the List rewrite went in.
collector until the transaction commits. Per recent discussion, this
should avoid confusing autovacuum when an updating transaction runs for
a long time.
for the languages even when not installed in a standard directory.
pltcl may need this treatment as well, but we don't have the right path
conveniently available, so I'll leave it alone as long as there aren't
actual reports of trouble.
in terms of macro 'rpathdir', as I proposed a few weeks ago. In itself
this commit shouldn't change the behavior at all, but it opens the door
to using special rpaths for the PL shared libraries, as seems to be
needed for plperl in particular.
may expand the Perl stack, therefore we must SPAGAIN to reload the local
stack pointer after calling it. Also a couple other marginal readability
improvements.
this is to avoid scenarios where incoming backends find no live copies
of a database's row because the only live copy is in an as-yet-unwritten
shared buffer, which they can't see. Also, use FlushRelationBuffers()
for forcing out pg_database, instead of the much more expensive BufferSync().
There's no need to write out pages belonging to other relations.
some of the bugs exposed thereby. The remaining 'might be used uninitialized'
warnings look like live bugs, but I am not familiar enough with Perl/C hacking
to tell how to fix them.
Rather than using ReadBuffer() to increment the reference count on an
already-pinned buffer, we should use IncrBufferRefCount() as it is
faster and does not require acquiring the BufMgrLock.
even uglier than it was already :-(. Also, on Windows only, use temporary
shared memory segments instead of ordinary files to pass over critical
variable values from postmaster to child processes. Magnus Hagander
more than 65K columns, or when the created table has more than 65K columns
due to adding inherited columns from parent relations. Fix a similar
crash when processing SELECT queries with more than 65K target list
entries. In all three cases we would eventually detect the error and
elog, but the check was being made too late.
We don't really want to start a new SPI connection, just keep using the old
one; otherwise we have memory management problems as illustrated by
John Kennedy's bug report of today. This requires a bit of a hack to
ensure the SPI stack state is properly restored, but then again what we
were doing before was a hack too, strictly speaking. Add a regression
test to cover this case.
plain SUSET instead. Also delay processing of options received in
client connection request until after we know if the user is a superuser,
so that SUSET values can be set that way by legitimate superusers.
Per recent discussion.
buffer is valid, as ReadBuffer() will elog on error. Most of the call
sites of ReadBuffer() got this right, but this patch fixes those call
sites that did not.
lacking pqsignal which is now required. This was found and fixed for
VC++ by Shachar Shemesh, I simply duplicated the fix for the Borland
makefile (untested, as I don't have that compiler).
Dave Page
> pg specific, like "PostgreSQL.1". I have not done this since a new compile
> would not detect a running old beta. But now would be the time (or never).
Zeugswetter Andreas
shared memory segment ID. If we can't access the existing shmem segment,
it must not be relevant to our data directory. If we can access it,
then attach to it and check for an actual match to the data directory.
This should avoid some cases of failure-to-restart-after-boot without
introducing any significant risk of failing to detect a still-running
old backend.
estimates when combining the estimates for a range query. As pointed out
by Miquel van Smoorenburg, the existing check for an impossible combined
result would quite possibly fail to detect one default and one non-default
input. It seems better to use the default range query estimate in such
cases. To do so, add a check for an estimate of exactly DEFAULT_INEQ_SEL.
This is a bit ugly because it introduces additional coupling between
clauselist_selectivity and scalarltsel/scalargtsel, but it's not like
there wasn't plenty already...
working as intended --- for some reason, FROM a.b.c was getting
parsed as if it were a function name and not a qualified name.
I think there must be a bug in bison, because it should have
complained that the grammar was ambiguous. Anyway, fix it along
the same lines previously used for func_name vs columnref, and get
rid of the right-recursion in attrs that seems to have confused
bison.
actual executable location. This allows people to continue to use
setups where, eg, postmaster is symlinked from a convenient place.
Per gripe from Josh Berkus.
type-and-length coercion function, make sure that the coercion function
is told the correct typmod. Fixes Kris Jurka's example of a domain
over bit(N).
everywhere not just some places, get rid of . and .. when joining path
sections together. This should eliminate most of the ugly paths like
/foo/bar/./baz that we've been generating.
clause implicitly whenever one is not given explicitly. Remove concept
of a schema having an associated tablespace, and simplify the rules for
selecting a default tablespace for a table or index. It's now just
(a) explicit TABLESPACE clause; (b) default_tablespace if that's not an
empty string; (c) database's default. This will allow pg_dump to use
SET commands instead of tablespace clauses to determine object locations
(but I didn't actually make it do so). All per recent discussions.
