The tar output module did some very ugly and ultimately incorrect hacking
on COPY commands to try to get them to work in the context of restoring a
deconstructed tar archive. In particular, it would fail altogether for
table names containing any upper-case characters, since it smashed the
command string to lower-case before modifying it (and, just to add insult
to injury, did that in a way that would fail in multibyte encodings).
I don't see any particular value in being flexible about the case of the
command keywords, since the string will just have been created by
dumpTableData, so let's get rid of the whole case-folding thing.
Also, it doesn't seem to meet the POLA for the script to restore data only
in COPY mode, so add \i commands to make it have comparable behavior in
--inserts mode.
Noted while looking at the tar-output code in connection with Brian
Weaver's patch.
The original only expected file failed to consider machines without
non-default collation support. Per buildfarm.
Also, move the test to another parallel group; the one it was originally
put in is already full according to comments in the schedule file. Per
note from Tom Lane.
Both programs got the "magic" string wrong, causing standard-conforming tar
implementations to believe the output was just legacy tar format without
any POSIX extensions. This doesn't actually matter that much, especially
since pg_dump failed to fill the POSIX fields anyway, but still there is
little point in emitting tar format if we can't be compliant with the
standard. In addition, pg_dump failed to write the EOF marker correctly
(there should be 2 blocks of zeroes not just one), pg_basebackup put the
numeric group ID in the wrong place, and both programs had a pretty
brain-dead idea of how to compute the checksum. Fix all that and improve
the comments a bit.
pg_restore is modified to accept either the correct POSIX-compliant "magic"
string or the previous value. This part of the change will need to be
back-patched to avoid an unnecessary compatibility break when a previous
version tries to read tar-format output from 9.3 pg_dump.
Brian Weaver and Tom Lane
This fixes another error in commit 9e8da0f757.
I neglected to make the mark/restore functionality save and restore the
current set of array key values, which led to strange behavior if an
IndexScan with ScalarArrayOpExpr quals was used as the inner side of a
mergejoin. Per bug #7570 from Melese Tesfaye.
This worked fine for superusers, but not for ordinary users trying to
cancel their own processes. Tweak the order the checks are done in so
that we correctly return SIGNAL_BACKEND_ERROR (which current callers
know to ignore without erroring out) so that an ordinary user can loop
through a resultset without fearing that a process might exit in the
middle of said looping -- causing the remaining processes to go
unsignalled.
Incidentally, the last in-core caller of IsBackendPid() is now gone.
However, the function is exported and must remain in place, because
there are plenty of callers in external modules.
Author: Josh Kupershmidt
Reviewed by Noah Misch
This script is a bit slow, but still it only takes a fraction of the time
the bison run does, so the overhead doesn't seem intolerable. And we
definitely need some mechanical aid here, because people keep missing
the need to add new keywords to the appropriate keyword-list production.
While at it, I moved check_keywords.pl from src/tools into
src/backend/parser where it's actually used, and did some very minor
cleanup on the script.
There were assorted places where unreserved keywords were not treated the
same as T_WORD (that is, a random unrecognized identifier). Fix them.
It might not always be possible to allow this, but it is in all these
places, so I don't see any downside.
Per gripe from Jim Wilson. Arguably this is a bug fix, but given the lack
of other complaints and the ease of working around it (just quote the
word), I won't risk back-patching.
Once again, somebody who ought to know better forgot this. We really
need some automated cross-check on the keyword-list productions, I think.
Per report from Brian Weaver.
The syntax "su -c 'command' username" is not accepted by all versions of
su, for example not OpenBSD's. More portable is "su username -c
'command'". So change runtime.sgml to recommend that syntax. Also,
add a -D switch to the OpenBSD example script, for consistency with other
examples. Per Denis Lapshin and Gábor Hidvégi.
This allows easily splitting configuration into many files, deployed in a
directory.
Magnus Hagander, Greg Smith, Selena Deckelmann, reviewed by Noah Misch.
Produce a NOTICE when the label already exists, for consistency with other
CREATE IF NOT EXISTS commands. Also, fix the code so it produces something
more user-friendly than an index violation when the label already exists.
This not incidentally enables making a regression test that the previous
patch didn't make for fear of exposing an unpredictable OID in the results.
Also some wordsmithing on the documentation.
If the label is already in the enum the statement becomes a no-op.
This will reduce the pain that comes from our not allowing this
operation inside a transaction block.
Andrew Dunstan, reviewed by Tom Lane and Magnus Hagander.
The previous scheme had bugs in some corner cases involving tables that had
been renamed since a view was made. This could result in dumped views that
failed to reload or reloaded incorrectly, as seen in bug #7553 from Lloyd
Albin, as well as in some pgsql-hackers discussion back in January. Also,
its behavior for printing EXPLAIN plans was sometimes confusing because of
willingness to use the same alias for multiple RTEs (it was Ashutosh
Bapat's complaint about that aspect that started the January thread).
To fix, ensure that each RTE in the query has a unique unqualified alias,
by modifying the alias if necessary (we add "_" and digits as needed to
create a non-conflicting name). Then we can just print its variables with
that alias, avoiding the confusing and bug-prone scheme of sometimes
schema-qualifying variable names. In EXPLAIN, it proves to be expedient to
take the further step of only assigning such aliases to RTEs that are
actually referenced in the query, since the planner has a habit of
generating extra RTEs with the same alias in situations such as
inheritance-tree expansion.
Although this fixes a bug of very long standing, I'm hesitant to back-patch
such a noticeable behavioral change. My experiments while creating a
regression test convinced me that actually incorrect output (as opposed to
confusing output) occurs only in very narrow cases, which is backed up by
the lack of previous complaints from the field. So we may be better off
living with it in released branches; and in any case it'd be smart to let
this ripen awhile in HEAD before we consider back-patching it.
Similar changes were done to pg_hba.conf earlier already, this commit makes
pg_ident.conf to behave the same as pg_hba.conf.
This has two user-visible effects. First, if pg_ident.conf contains multiple
errors, the whole file is parsed at postmaster startup time and all the
errors are immediately reported. Before this patch, the file was parsed and
the errors were reported only when someone tries to connect using an
authentication method that uses the file, and the parsing stopped on first
error. Second, if you SIGHUP to reload the config files, and the new
pg_ident.conf file contains an error, the error is logged but the old file
stays in effect.
Also, regular expressions in pg_ident.conf are now compiled only once when
the file is loaded, rather than every time the a user is authenticated. That
should speed up authentication if you have a lot of regexps in the file.
Amit Kapila
These calls were removed in commit 4240e429d0
as part of a general refactoring and improvement of DDL locking. However,
there's a problem not solved by the rewrite, which is that GRANT/REVOKE
update pg_class.relacl without taking any particular lock on the target
table as such. If another backend fails to do AcceptInvalidationMessages,
it won't notice a recently-committed change in ACLs. Bug #7557 from Piotr
Czachur demonstrates that there's at least one code path in 9.2.0 in which
a command fails to do any AcceptInvalidationMessages calls at all, if the
current transaction already holds all the locks it will need.
Since we're hard up against the release deadline for 9.2.1, fix this by
putting back the AcceptInvalidationMessages calls in heap_openrv and
heap_openrv_extended, thereby restoring the historical behavior in this
area. We ought to look for a more elegant and perhaps more bulletproof
solution, but there's no time for that right now.
In commit 9e8da0f757, I improved btree
to handle ScalarArrayOpExpr quals natively, so that constructs like
"indexedcol IN (list)" could be supported by index-only scans. Using
such a qual results in multiple scans of the index, under-the-hood.
I went to some lengths to ensure that this still produces rows in index
order ... but I failed to recognize that if a higher-order index column
is lacking an equality constraint, rescans can produce out-of-order
data from that column. Tweak the planner to not expect sorted output
in that case. Per trouble report from Robert McGehee.
Somewhere along the line, somebody decided to remove all trace of this
notation from the documentation text. It was still in the command syntax
synopses, or at least some of them, but with no indication what it meant.
This will not do, as evidenced by the confusion apparent in bug #7543;
even if the notation is now unnecessary, people will find it in legacy
SQL code and need to know what it does.
Currently, we are making mangled copies of plpython/{expected,sql} to
plpython/python3/{expected,sql}, and run the tests in
plpython/python3. This has the disadvantage that the regression.diffs
file, if any, ends up in plpython/python3, which is not the normal
location. If we instead make the mangled copies in
plpython/{expected,sql}/python3/, we can run the tests from the normal
directory, regression.diffs ends up the normal place, and the
pg_regress invocation also becomes a lot simpler. It's also more
obvious at run time what's going on, because the tests end up being
named "python3/something" in the test output.
Some experimentation with examples similar to bug #7539 has convinced me
that indxpath.c's original implementation of parameterized-path generation
was several bricks shy of a load. In general, if we are relying on a
particular outer rel or set of outer rels for a parameterized path, the
path should use every indexable join clause that's available from that rel
or rels. Any join clauses that get left out of the indexqual will end up
getting applied as plain filter quals (qpquals), and that's generally a
significant loser compared to having the index AM enforce them. (This is
particularly true with btree, which can skip the index scan entirely if
it can see that the given indexquals are mutually contradictory.) The
original heuristics failed to ensure this, though, and were overly
complicated anyway. Rewrite to make the code explicitly identify each
useful set of outer rels and then select all applicable join clauses for
each one. The one plan that changes in the regression tests is in fact
for the better according to the planner's cost estimates.
(Note: this is not a correctness issue but just a matter of plan quality.
I don't yet know what is going on in bug #7539, but I don't expect this
change to fix that.)
Recovery code documents clearly that a shutdown checkpoint is executed at
end of recovery - a shutdown checkpoint WAL record is written but the buffer
manager had been altered to treat end of recovery as a normal checkpoint.
This bug exacerbates the bufmgr relpersistence bug.
Bug spotted by Andres Freund, patch by me.
The documentation mentioned setting autovacuum_freeze_max_age to
"its maximum allowed value of a little less than two billion".
This led to a post asking about the exact maximum allowed value,
which is precisely two billion, not "a little less".
Based on question by Radovan Jablonovsky. Backpatch to 8.3.
Looks like the correct size of DOS-ified tenk.data is 680800 not 680801.
(I got the latter from a version of unix2dos that appends a trailing ^Z,
which evidently is not git's practice.)
The idea here is to provide a more easily diagnosable failure diff when
the problem is that tenk.data has been DOS-ified, as I believe to be
happening currently on buildfarm member hamerkop. Per suggestion from
Magnus Hagander.
Also, sync output/largeobject_1.source with current regression test.
Failure to do that in commit 3a0e4d36eb
turns out to be the real reason that hamerkop has been complaining.
Given what we now know about the cause of this bug, it seems like it'd
be a real good idea to include it in the plperl regression tests, so as
to catch any platform-specific cases where the code gets misoptimized.
This at least saves some palloc overhead, and should furthermore reduce
the risk of anything going wrong, eg somebody resetting the context the
current_call_data record was in.
In commit 1bc16a9460 I added a minor
optimization to drop the component variables of a GROUP BY expression from
the target list computed at the aggregation level of a query, if those Vars
weren't referenced elsewhere in the tlist. However, I overlooked that the
window-function planning code would deconstruct such expressions and thus
need to have access to their component variables. Fix it to not do that.
While at it, I removed the distinction between volatile and nonvolatile
window partition/order expressions: the code now computes all of them
at the aggregation level. This saves a relatively expensive check for
volatility, and it's unclear that the resulting plan isn't better anyway.
Per bug #7535 from Louis-David Mitterrand. Back-patch to 9.2.
Peter Eisentraut
Tom Lane
Alvaro Herrera
Andrew Dunstan
Heikki Linnakangas
Simon Riggs
Kevin Grittner
Robert Haas