These two new parameters, named sslminprotocolversion and
sslmaxprotocolversion, allow to respectively control the minimum and the
maximum version of the SSL protocol used for the SSL connection attempt.
The default setting is to allow any version for both the minimum and the
maximum bounds, causing libpq to rely on the bounds set by the backend
when negotiating the protocol to use for an SSL connection. The bounds
are checked when the values are set at the earliest stage possible as
this makes the checks independent of any SSL implementation.
Author: Daniel Gustafsson
Reviewed-by: Michael Paquier, Cary Huang
Discussion: https://postgr.es/m/4F246AE3-A7AE-471E-BD3D-C799D3748E03@yesql.se
In a statement like "UPDATE remote_tab SET (x,y) = (SELECT ...)",
we'd conclude that the statement could be directly executed remotely,
because the sub-SELECT is in a resjunk tlist item that's not examined
for shippability. Currently that ends up crashing if the sub-SELECT
contains any remote Vars. Prevent the crash by deeming MULTIEXEC
Params to be unshippable.
This is a bit of a brute-force solution, since if the sub-SELECT
*doesn't* contain any remote Vars, the current execution technology
would work; but that's not a terribly common use-case for this syntax,
I think. In any case, we generally don't try to ship sub-SELECTs, so
it won't surprise anybody that this doesn't end up as a remote direct
update. I'd be inclined to see if that general limitation can be fixed
before worrying about this case further.
Per report from Lukáš Sobotka.
Back-patch to 9.6. 9.5 had MULTIEXPR, but we didn't try to perform
remote direct updates then, so the case didn't arise anyway.
Discussion: https://postgr.es/m/CAJif3k+iA_ekBB5Zw2hDBaE1wtiQa4LH4_JUXrrMGwTrH0J01Q@mail.gmail.com
Per project policy, transient roles created by regression test cases
should be named "regress_something", to reduce the risks of running
such cases against installed servers. And no such role should ever
be left behind after running a test.
Discussion: https://postgr.es/m/11297.1576868677@sss.pgh.pa.us
We realized years ago that it's better for libpq to accept all
connection parameters syntactically, even if some are ignored or
restricted due to lack of the feature in a particular build.
However, that lesson from the SSL support was for some reason never
applied to the GSSAPI support. This is causing various buildfarm
members to have problems with a test case added by commit 6136e94dc,
and it's just a bad idea from a user-experience standpoint anyway,
so fix it.
While at it, fix some places where parameter-related infrastructure
was added with the aid of a dartboard, or perhaps with the aid of
the anti-pattern "add new stuff at the end". It should be safe
to rearrange the contents of struct pg_conn even in released
branches, since that's private to libpq (and we'd have to move
some fields in some builds to fix this, anyway).
Back-patch to all supported branches.
Discussion: https://postgr.es/m/11297.1576868677@sss.pgh.pa.us
Currently postgres_fdw doesn't permit a non-superuser to connect to a
foreign server without specifying a password, or to use an
authentication mechanism that doesn't use the password. This is to avoid
using the settings and identity of the user running Postgres.
However, this doesn't make sense for all authentication methods. We
therefore allow a superuser to set "password_required 'false'" for user
mappings for the postgres_fdw. The superuser must ensure that the
foreign server won't try to rely solely on the server identity (e.g.
trust, peer, ident) or use an authentication mechanism that relies on the
password settings (e.g. md5, scram-sha-256).
This feature is a prelude to better support for sslcert and sslkey
settings in user mappings.
Author: Craig Ringer.
Discussion: https://postgr.es/m/075135da-545c-f958-fed0-5dcb462d6dae@2ndQuadrant.com
This patch causes EXPLAIN to always assign a separate table alias to the
parent RTE of an append relation (inheritance set); before, such RTEs
were ignored if not actually scanned by the plan. Since the child RTEs
now always have that same alias to start with (cf. commit 55a1954da),
the net effect is that the parent RTE usually gets the alias used or
implied by the query text, and the children all get that alias with "_N"
appended. (The exception to "usually" is if there are duplicate aliases
in different subtrees of the original query; then some of those original
RTEs will also have "_N" appended.)
This results in more uniform output for partitioned-table plans than
we had before: the partitioned table itself gets the original alias,
and all child tables have aliases with "_N", rather than the previous
behavior where one of the children would get an alias without "_N".
The reason for giving the parent RTE an alias, even if it isn't scanned
by the plan, is that we now use the parent's alias to qualify Vars that
refer to an appendrel output column and appear above the Append or
MergeAppend that computes the appendrel. But below the append, Vars
refer to some one of the child relations, and are displayed that way.
This seems clearer than the old behavior where a Var that could carry
values from any child relation was displayed as if it referred to only
one of them.
While at it, change ruleutils.c so that the code paths used by EXPLAIN
deal in Plan trees not PlanState trees. This effectively reverts a
decision made in commit 1cc29fe7c, which seemed like a good idea at
the time to make ruleutils.c consistent with explain.c. However,
it's problematic because we'd really like to allow executor startup
pruning to remove all the children of an append node when possible,
leaving no child PlanState to resolve Vars against. (That's not done
here, but will be in the next patch.) This requires different handling
of subplans and initplans than before, but is otherwise a pretty
straightforward change.
Discussion: https://postgr.es/m/001001d4f44b$2a2cca50$7e865ef0$@lab.ntt.co.jp
AfterTriggerExecute() retrieves a fresh tuple or pair of tuples from a
tuplestore and then stores the tuple(s) in the passed-in slot(s) if
AFTER_TRIGGER_FDW_FETCH, while it uses the most-recently-retrieved
tuple(s) stored in the slot(s) if AFTER_TRIGGER_FDW_REUSE. This was
done correctly before 12, but commit ff11e7f4b broke it by mistakenly
clearing the tuple(s) stored in the slot(s) in that function, leading to
an assertion failure as reported in bug #16139 from Alexander Lakhin.
Also, fix some other issues with the aforementioned commit in passing:
* For tg_newslot, which is a slot added to the TriggerData struct by the
commit to store new updated tuples, it didn't ensure the slot was NULL
if there was no such tuple.
* The commit failed to update the documentation about the trigger
interface.
Author: Etsuro Fujita
Backpatch-through: 12
Discussion: https://postgr.es/m/16139-94f9ccf0db6119ec%40postgresql.org
EXPLAIN generally only adds schema qualifications to table names when
VERBOSE is specified. In postgres_fdw's "Relations" output, table
names were always so qualified, but that was an implementation
restriction: in the original coding, we didn't have access to the
verbose flag at the time the string was generated. After the code
rearrangement of commit 4526951d5, we do have that info available
at the right time, so make this output follow the normal rule.
Discussion: https://postgr.es/m/12424.1575168015@sss.pgh.pa.us
If an inheritance/partitioning parent table is assigned some column
alias names in the query, EXPLAIN mapped those aliases onto the
child tables' columns by physical position, resulting in bogus output
if a child table's columns aren't one-for-one with the parent's.
To fix, make expand_single_inheritance_child() generate a correctly
re-mapped column alias list, rather than just copying the parent
RTE's alias node. (We have to fill the alias field, not just
adjust the eref field, because ruleutils.c will ignore eref in
favor of looking at the real column names.)
This means that child tables will now always have alias fields in
plan rtables, where before they might not have. That results in
a rather substantial set of regression test output changes:
EXPLAIN will now always show child tables with aliases that match
the parent table (usually with "_N" appended for uniqueness).
But that seems like a net positive for understandability, since
the parent alias corresponds to something that actually appeared
in the original query, while the child table names didn't.
(Note that this does not change anything for cases where an explicit
table alias was written in the query for the parent table; it
just makes cases without such aliases behave similarly to that.)
Hence, while we could avoid these subsidiary changes if we made
inherit.c more complicated, we choose not to.
Discussion: https://postgr.es/m/12424.1575168015@sss.pgh.pa.us
The relation aliases shown in the "Relations" line for a foreign scan
didn't always agree with those used in the rest of EXPLAIN's output.
The regression test result changes appearing here provide examples.
It's really impossible for postgres_fdw to duplicate EXPLAIN's alias
assignment logic during postgresGetForeignRelSize(), because of the
de-duplication that EXPLAIN does on a global basis --- and anyway,
trying to duplicate that would be unmaintainable. Instead, just put
numeric rangetable indexes into the string, and convert those to
table names/aliases in postgresExplainForeignScan, which does have
access to the results of ruleutils.c's alias assignment logic.
Aside from being more reliable, this shifts some work from planning
to EXPLAIN, which is a good tradeoff for performance. (I also
changed from using StringInfo to using psprintf, which makes the
code slightly simpler and reduces its memory consumption.)
A kluge required by this solution is that we have to reverse-engineer
the rtoffset applied by setrefs.c. If that logic ever fails
(presumably because the member tables of a join got offset by
different amounts), we'll need some more cooperation with setrefs.c
to keep things straight. But for now, there's no need for that.
Arguably this is a back-patchable bug fix, but since this is a mostly
cosmetic issue and there have been no field complaints, I'll refrain
for now.
Discussion: https://postgr.es/m/12424.1575168015@sss.pgh.pa.us
postgres_fdw does not support two-phase transactions, so let's add a
small negative test case to check after it. Note that this is checked
using an end-of-xact callback to ensure a proper connection cleanup with
the foreign server, which is called before checking if a server is able
to handle 2PC with max_prepared_xacts, so this test does not need an
alternate output file.
Author: Gilles Darold
Discussion: https://postgr.es/m/20191108090507.GC1768@paquier.xyz
Currently, postgres_fdw does not support preparing a remote transaction
for two-phase commit even in the case where the remote transaction is
read-only, but the old error message appeared to imply that that was not
supported only if the remote transaction modified remote tables. Change
the message so as to include the case where the remote transaction is
read-only.
Also fix a comment above the message.
Also add a note about the lack of supporting PREPARE TRANSACTION to the
postgres_fdw documentation.
Reported-by: Gilles Darold
Author: Gilles Darold and Etsuro Fujita
Reviewed-by: Michael Paquier and Kyotaro Horiguchi
Backpatch-through: 9.4
Discussion: https://postgr.es/m/08600ed3-3084-be70-65ba-279ab19618a5%40darold.net
When maintaining or merging patches, one of the most common sources
for conflicts are the list of objects in makefiles. Especially when
the split across lines has been changed on both sides, which is
somewhat common due to attempting to stay below 80 columns, those
conflicts are unnecessarily laborious to resolve.
By splitting, and alphabetically sorting, OBJS style lines into one
object per line, conflicts should be less frequent, and easier to
resolve when they still occur.
Author: Andres Freund
Discussion: https://postgr.es/m/20191029200901.vww4idgcxv74cwes@alap3.anarazel.de
This gives an alternative way of catching exceptions, for the common
case where the cleanup code is the same in the error and non-error
cases. So instead of
PG_TRY();
{
... code that might throw ereport(ERROR) ...
}
PG_CATCH();
{
cleanup();
PG_RE_THROW();
}
PG_END_TRY();
cleanup();
one can write
PG_TRY();
{
... code that might throw ereport(ERROR) ...
}
PG_FINALLY();
{
cleanup();
}
PG_END_TRY();
Discussion: https://www.postgresql.org/message-id/flat/95a822c3-728b-af0e-d7e5-71890507ae0c%402ndquadrant.com
The basic rule we follow here is to always first include 'postgres.h' or
'postgres_fe.h' whichever is applicable, then system header includes and
then Postgres header includes. In this, we also follow that all the
Postgres header includes are in order based on their ASCII value. We
generally follow these rules, but the code has deviated in many places.
This commit makes it consistent just for contrib modules. The later
commits will enforce similar rules in other parts of code.
Author: Vignesh C
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/CALDaNm2Sznv8RR6Ex-iJO6xAdsxgWhCoETkaYX=+9DW3q0QCfA@mail.gmail.com
In the wake of commit 1cff1b95a, the result of list_concat no longer
shares the ListCells of the second input. Therefore, we can replace
"list_concat(x, list_copy(y))" with just "list_concat(x, y)".
To improve call sites that were list_copy'ing the first argument,
or both arguments, invent "list_concat_copy()" which produces a new
list sharing no ListCells with either input. (This is a bit faster
than "list_concat(list_copy(x), y)" because it makes the result list
the right size to start with.)
In call sites that were not list_copy'ing the second argument, the new
semantics mean that we are usually leaking the second List's storage,
since typically there is no remaining pointer to it. We considered
inventing another list_copy variant that would list_free the second
input, but concluded that for most call sites it isn't worth worrying
about, given the relative compactness of the new List representation.
(Note that in cases where such leakage would happen, the old code
already leaked the second List's header; so we're only discussing
the size of the leak not whether there is one. I did adjust two or
three places that had been troubling to free that header so that
they manually free the whole second List.)
Patch by me; thanks to David Rowley for review.
Discussion: https://postgr.es/m/11587.1550975080@sss.pgh.pa.us
When we already know the length that we're going to append, then it
makes sense to use appendBinaryStringInfo instead of
appendStringInfoString so that the append can be performed with a simple
memcpy() using a known length rather than having to first perform a
strlen() call to obtain the length.
Discussion: https://postgr.es/m/CAKJS1f8+FRAM1s5+mAa3isajeEoAaicJ=4e0WzrH3tAusbbiMQ@mail.gmail.com
Originally, Postgres Lists were a more or less exact reimplementation of
Lisp lists, which consist of chains of separately-allocated cons cells,
each having a value and a next-cell link. We'd hacked that once before
(commit d0b4399d8) to add a separate List header, but the data was still
in cons cells. That makes some operations -- notably list_nth() -- O(N),
and it's bulky because of the next-cell pointers and per-cell palloc
overhead, and it's very cache-unfriendly if the cons cells end up
scattered around rather than being adjacent.
In this rewrite, we still have List headers, but the data is in a
resizable array of values, with no next-cell links. Now we need at
most two palloc's per List, and often only one, since we can allocate
some values in the same palloc call as the List header. (Of course,
extending an existing List may require repalloc's to enlarge the array.
But this involves just O(log N) allocations not O(N).)
Of course this is not without downsides. The key difficulty is that
addition or deletion of a list entry may now cause other entries to
move, which it did not before.
For example, that breaks foreach() and sister macros, which historically
used a pointer to the current cons-cell as loop state. We can repair
those macros transparently by making their actual loop state be an
integer list index; the exposed "ListCell *" pointer is no longer state
carried across loop iterations, but is just a derived value. (In
practice, modern compilers can optimize things back to having just one
loop state value, at least for simple cases with inline loop bodies.)
In principle, this is a semantics change for cases where the loop body
inserts or deletes list entries ahead of the current loop index; but
I found no such cases in the Postgres code.
The change is not at all transparent for code that doesn't use foreach()
but chases lists "by hand" using lnext(). The largest share of such
code in the backend is in loops that were maintaining "prev" and "next"
variables in addition to the current-cell pointer, in order to delete
list cells efficiently using list_delete_cell(). However, we no longer
need a previous-cell pointer to delete a list cell efficiently. Keeping
a next-cell pointer doesn't work, as explained above, but we can improve
matters by changing such code to use a regular foreach() loop and then
using the new macro foreach_delete_current() to delete the current cell.
(This macro knows how to update the associated foreach loop's state so
that no cells will be missed in the traversal.)
There remains a nontrivial risk of code assuming that a ListCell *
pointer will remain good over an operation that could now move the list
contents. To help catch such errors, list.c can be compiled with a new
define symbol DEBUG_LIST_MEMORY_USAGE that forcibly moves list contents
whenever that could possibly happen. This makes list operations
significantly more expensive so it's not normally turned on (though it
is on by default if USE_VALGRIND is on).
There are two notable API differences from the previous code:
* lnext() now requires the List's header pointer in addition to the
current cell's address.
* list_delete_cell() no longer requires a previous-cell argument.
These changes are somewhat unfortunate, but on the other hand code using
either function needs inspection to see if it is assuming anything
it shouldn't, so it's not all bad.
Programmers should be aware of these significant performance changes:
* list_nth() and related functions are now O(1); so there's no
major access-speed difference between a list and an array.
* Inserting or deleting a list element now takes time proportional to
the distance to the end of the list, due to moving the array elements.
(However, it typically *doesn't* require palloc or pfree, so except in
long lists it's probably still faster than before.) Notably, lcons()
used to be about the same cost as lappend(), but that's no longer true
if the list is long. Code that uses lcons() and list_delete_first()
to maintain a stack might usefully be rewritten to push and pop at the
end of the list rather than the beginning.
* There are now list_insert_nth...() and list_delete_nth...() functions
that add or remove a list cell identified by index. These have the
data-movement penalty explained above, but there's no search penalty.
* list_concat() and variants now copy the second list's data into
storage belonging to the first list, so there is no longer any
sharing of cells between the input lists. The second argument is
now declared "const List *" to reflect that it isn't changed.
This patch just does the minimum needed to get the new implementation
in place and fix bugs exposed by the regression tests. As suggested
by the foregoing, there's a fair amount of followup work remaining to
do.
Also, the ENABLE_LIST_COMPAT macros are finally removed in this
commit. Code using those should have been gone a dozen years ago.
Patch by me; thanks to David Rowley, Jesper Pedersen, and others
for review.
Discussion: https://postgr.es/m/11587.1550975080@sss.pgh.pa.us
This changes various places where appendPQExpBuffer was used in places
where it was possible to use appendPQExpBufferStr, and likewise for
appendStringInfo and appendStringInfoString. This is really just a
stylistic improvement, but there are also small performance gains to be
had from doing this.
Discussion: http://postgr.es/m/CAKJS1f9P=M-3ULmPvr8iCno8yvfDViHibJjpriHU8+SXUgeZ=w@mail.gmail.com
Previously, in the loop in postgresAcquireSampleRowsFunc() to iterate
fetching rows from a given remote table, we redundantly 1) determined the
fetch size by parsing the table's server/table-level options and then 2)
constructed the fetch command; remove that redundancy.
Author: Etsuro Fujita
Reviewed-by: Julien Rouhaud
Discussion: https://postgr.es/m/CAPmGK17_urk9qkLV65_iYMFw64z5qhdfhY=tMVV6Jg4KNYx8+w@mail.gmail.com
Commit aa09cd242 modified estimate_path_cost_size() so that it reuses
cached costs of a basic foreign path for a given foreign-base/join
relation when costing pre-sorted foreign paths for that relation, but it
incorrectly re-computed retrieved_rows, an estimated number of rows
fetched from the remote side, which is needed for costing both the basic
and pre-sorted foreign paths. To fix, handle retrieved_rows the same way
as the cached costs: store in that relation's fpinfo the retrieved_rows
estimate computed for costing the basic foreign path, and reuse it when
costing the pre-sorted foreign paths. Also, reuse the rows/width
estimates stored in that relation's fpinfo when costing the pre-sorted
foreign paths, to make the code consistent.
In commit ffab494a4, to extend the costing mentioned above to the
foreign-grouping case, I made a change to add_foreign_grouping_paths() to
store in a given foreign-grouped relation's RelOptInfo the rows estimate
for that relation for reuse, but this patch makes that change unnecessary
since we already store the row estimate in that relation's fpinfo, which
this patch reuses when costing a foreign path for that relation with the
sortClause ordering; remove that change.
In passing, fix thinko in commit 7012b132d: in estimate_path_cost_size(),
the width estimate for a given foreign-grouped relation to be stored in
that relation's fpinfo was reset incorrectly when costing a basic foreign
path for that relation with local stats.
Apply the patch to HEAD only to avoid destabilizing existing plan choices.
Author: Etsuro Fujita
Discussion: https://postgr.es/m/CAPmGK17jaJLPDEkgnP2VmkOg=5wT8YQ1CqssU8JRpZ_NSE+dqQ@mail.gmail.com
Previously, in postgresPlanForeignModify, we planned an UPDATE operation
on a foreign table so that we transmit only columns that were explicitly
targets of the UPDATE, so as to avoid unnecessary data transmission, but
if there were BEFORE ROW UPDATE triggers on the foreign table, those
triggers might change values for non-target columns, in which case we
would miss sending changed values for those columns. Prevent optimizing
away transmitting all columns if there are BEFORE ROW UPDATE triggers on
the foreign table.
This is an oversight in commit 7cbe57c34 which added triggers on foreign
tables, so apply the patch all the way back to 9.4 where that came in.
Author: Shohei Mochizuki
Reviewed-by: Amit Langote
Discussion: https://postgr.es/m/201905270152.x4R1q3qi014550@toshiba.co.jp
This is still using the 2.0 version of pg_bsd_indent.
I thought it would be good to commit this separately,
so as to document the differences between 2.0 and 2.1 behavior.
Discussion: https://postgr.es/m/16296.1558103386@sss.pgh.pa.us
In commit 7012b132d0, which added support for aggregate pushdown in
postgres_fdw, the expense of evaluating the final scan/join target
computed by make_group_input_target() was not accounted for at all in
costing aggregate pushdown paths with local statistics. The right fix
for this would be to have a separate upper stage to adjust the final
scan/join relation (see comments for apply_scanjoin_target_to_paths());
but for now, fix by adding the tlist eval cost when costing aggregate
pushdown paths with local statistics.
Apply this to HEAD only to avoid destabilizing existing plan choices.
Author: Etsuro Fujita
Reviewed-By: Antonin Houska
Discussion: https://postgr.es/m/5C66A056.60007%40lab.ntt.co.jp
foreign_grouping_ok() is willing to put fairly arbitrary expressions into
the targetlist of a remote SELECT that's doing grouping or aggregation on
the remote side, including expressions that have no foreign component to
them at all. This is possibly a bit dubious from an efficiency standpoint;
but it rises to the level of a crash-causing bug if the expression is just
a Param or non-foreign Var. In that case, the expression will necessarily
also appear in the fdw_exprs list of values we need to send to the remote
server, and then setrefs.c's set_foreignscan_references will mistakenly
replace the fdw_exprs entry with a Var referencing the targetlist result.
The root cause of this problem is bad design in commit e7cb7ee14: it put
logic into set_foreignscan_references that IMV is postgres_fdw-specific,
and yet this bug shows that it isn't postgres_fdw-specific enough. The
transformation being done on fdw_exprs assumes that fdw_exprs is to be
evaluated with the fdw_scan_tlist as input, which is not how postgres_fdw
uses it; yet it could be the right thing for some other FDW. (In the
bigger picture, setrefs.c has no business assuming this for the other
expression fields of a ForeignScan either.)
The right fix therefore would be to expand the FDW API so that the
FDW could inform setrefs.c how it intends to evaluate these various
expressions. We can't change that in the back branches though, and we
also can't just summarily change setrefs.c's behavior there, or we're
likely to break external FDWs.
As a stopgap, therefore, hack up postgres_fdw so that it won't attempt
to send targetlist entries that look exactly like the fdw_exprs entries
they'd produce. In most cases this actually produces a superior plan,
IMO, with less data needing to be transmitted and returned; so we probably
ought to think harder about whether we should ship tlist expressions at
all when they don't contain any foreign Vars or Aggs. But that's an
optimization not a bug fix so I left it for later. One case where this
produces an inferior plan is where the expression in question is actually
a GROUP BY expression: then the restriction prevents us from using remote
grouping. It might be possible to work around that (since that would
reduce to group-by-a-constant on the remote side); but it seems like a
pretty unlikely corner case, so I'm not sure it's worth expending effort
solely to improve that. In any case the right long-term answer is to fix
the API as sketched above, and then revert this hack.
Per bug #15781 from Sean Johnston. Back-patch to v10 where the problem
was introduced.
Discussion: https://postgr.es/m/15781-2601b1002bad087c@postgresql.org
Commit 3d956d9562 added support for update row movement in postgres_fdw.
This patch fixes the following issues introduced by that commit:
* When a remote partition chosen to insert routed rows into was also an
UPDATE subplan target rel that would be updated later, the UPDATE that
used a direct modification plan modified those routed rows incorrectly
because those routed rows were visible to the later UPDATE command.
The right fix for this would be to have some way in postgres_fdw in
which the later UPDATE command ignores those routed rows, but it seems
hard to do so with the current infrastructure. For now throw an error
in that case.
* When a remote partition chosen to insert routed rows into was also an
UPDATE subplan target rel, fmstate created for the UPDATE that used a
non-direct modification plan was mistakenly overridden by another
fmstate created for inserting those routed rows into the partition.
This caused 1) server crash when the partition would be updated later,
and 2) resource leak when the partition had been already updated. To
avoid that, adjust the treatment of the fmstate for the inserting. As
for #1, since we would also have the incorrectness issue as mentioned
above, error out in that case as well.
Update the docs to mention that postgres_fdw currently does not handle
the case where a remote partition chosen to insert a routed row into is
also an UPDATE subplan target rel that will be updated later.
Author: Amit Langote and Etsuro Fujita
Reviewed-by: Amit Langote
Backpatch-through: 11 where row movement in postgres_fdw was added
Discussion: https://postgr.es/m/21e7eaa4-0d4d-20c2-a1f7-c7e96f4ce440@lab.ntt.co.jp
As reported by Tom, when ExecStoreMinimalTuple() had to perform a
conversion to store the minimal tuple in the slot, it forgot to
respect the shouldFree flag, and leaked the tuple into the current
memory context if true. Fix that by freeing the tuple in that case.
Looking at the relevant code made me (Andres) realize that not having
the shouldFree parameter to ExecForceStoreHeapTuple() was a bad
idea. Some callers had to locally implement the necessary logic, and
in one case it was missing, creating a potential per-group leak in
non-hashed aggregation.
The choice to not free the tuple in ExecComputeStoredGenerated() is
not pretty, but not introduced by this commit - I'll start a separate
discussion about it.
Reported-By: Tom Lane
Discussion: https://postgr.es/m/366.1555382816@sss.pgh.pa.us
Similarly to the set of parameters for keepalive, a connection parameter
for libpq is added as well as a backend GUC, called tcp_user_timeout.
Increasing the TCP user timeout is useful to allow a connection to
survive extended periods without end-to-end connection, and decreasing
it allows application to fail faster. By default, the parameter is 0,
which makes the connection use the system default, and follows a logic
close to the keepalive parameters in its handling. When connecting
through a Unix-socket domain, the parameters have no effect.
Author: Ryohei Nagaura
Reviewed-by: Fabien Coelho, Robert Haas, Kyotaro Horiguchi, Kirk
Jamison, Mikalai Keida, Takayuki Tsunakawa, Andrei Yahorau
Discussion: https://postgr.es/m/EDA4195584F5064680D8130B1CA91C45367328@G01JPEXMBYT04
The upper-planner pathification allows FDWs to arrange to push down
different types of upper-stage operations to the remote side. This
commit teaches postgres_fdw to do it for the (FINAL, NULL) upperrel,
which is responsible for doing LockRows, LIMIT, and/or ModifyTable.
This provides the ability for postgres_fdw to handle SELECT commands
so that it 1) skips the LockRows step (if any) (note that this is
safe since it performs early locking) and 2) pushes down the LIMIT
and/or OFFSET restrictions (if any) to the remote side. This doesn't
handle the INSERT/UPDATE/DELETE cases.
Author: Etsuro Fujita
Reviewed-By: Antonin Houska and Jeff Janes
Discussion: https://postgr.es/m/87pnz1aby9.fsf@news-spur.riddles.org.uk
The upper-planner pathification allows FDWs to arrange to push down
different types of upper-stage operations to the remote side. This
commit teaches postgres_fdw to do it for the (ORDERED, NULL) upperrel,
which is responsible for evaluating the query's ORDER BY ordering.
Since postgres_fdw is already able to evaluate that ordering remotely
for foreign baserels and foreign joinrels (see commit aa09cd242f et al.),
this adds support for that for foreign grouping relations.
Author: Etsuro Fujita
Reviewed-By: Antonin Houska and Jeff Janes
Discussion: https://postgr.es/m/87pnz1aby9.fsf@news-spur.riddles.org.uk
Previously, the planner created RangeTblEntry and RelOptInfo structs
for every partition of a partitioned table, even though many of them
might later be deemed uninteresting thanks to partition pruning logic.
This incurred significant overhead when there are many partitions.
Arrange to postpone creation of these data structures until after
we've processed the query enough to identify restriction quals for
the partitioned table, and then apply partition pruning before not
after creation of each partition's data structures. In this way
we need not open the partition relations at all for partitions that
the planner has no real interest in.
For queries that can be proven at plan time to access only a small
number of partitions, this patch improves the practical maximum
number of partitions from under 100 to perhaps a few thousand.
Amit Langote, reviewed at various times by Dilip Kumar, Jesper Pedersen,
Yoshikazu Imai, and David Rowley
Discussion: https://postgr.es/m/9d7c5112-cb99-6a47-d3be-cf1ee6862a1d@lab.ntt.co.jp
This is an SQL-standard feature that allows creating columns that are
computed from expressions rather than assigned, similar to a view or
materialized view but on a column basis.
This implements one kind of generated column: stored (computed on
write). Another kind, virtual (computed on read), is planned for the
future, and some room is left for it.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/b151f851-4019-bdb1-699e-ebab07d2f40a@2ndquadrant.com
We've been creating duplicate RTEs for partitioned tables just
because we do so for regular inheritance parent tables. But unlike
regular-inheritance parents which are themselves regular tables
and thus need to be scanned, partitioned tables don't need the
extra RTE.
This makes the conditions for building a child RTE the same as those
for building an AppendRelInfo, allowing minor simplification in
expand_single_inheritance_child. Since the planner's actual processing
is driven off the AppendRelInfo list, nothing much changes beyond that,
we just have one fewer useless RTE entry.
Amit Langote, reviewed and hacked a bit by me
Discussion: https://postgr.es/m/9d7c5112-cb99-6a47-d3be-cf1ee6862a1d@lab.ntt.co.jp
If there's only one child relation, the Append or MergeAppend isn't
doing anything useful, and can be elided. It does have a purpose
during planning though, which is to serve as a buffer between parent
and child Var numbering. Therefore we keep it all the way through
to setrefs.c, and get rid of it only after fixing references in the
plan level(s) above it. This works largely the same as setrefs.c's
ancient hack to get rid of no-op SubqueryScan nodes, and can even
share some code with that.
Note the change to make setrefs.c use apply_tlist_labeling rather than
ad-hoc code. This has the effect of propagating the child's resjunk
and ressortgroupref labels, which formerly weren't propagated when
removing a SubqueryScan. Doing that is demonstrably necessary for
the [Merge]Append cases, and seems harmless for SubqueryScan, if only
because trivial_subqueryscan is afraid to collapse cases where the
resjunk marking differs. (I suspect that restriction could now be
removed, though it's unclear that it'd make any new matches possible,
since the outer query can't have references to a child resjunk column.)
David Rowley, reviewed by Alvaro Herrera and Tomas Vondra
Discussion: https://postgr.es/m/CAKJS1f_7u8ATyJ1JGTMHFoKDvZdeF-iEBhs+sM_SXowOr9cArg@mail.gmail.com
In preparation for abstracting table storage, convert trigger.c to
track tuples in slots. Which also happens to make code calling
triggers simpler.
As the calling interface for triggers themselves is not changed in
this patch, HeapTuples still are extracted from the slot at that
time. But that's handled solely inside trigger.c, not visible to
callers. It's quite likely that we'll want to revise the external
trigger interface, but that's a separate large project.
As part of this work the slots used for old/new/return tuples are
moved from EState into ResultRelInfo, as different updated tables
might need different slots. The slots are now also now created
on-demand, which is good both from an efficiency POV, but also makes
the modifying code simpler.
Author: Andres Freund, Amit Khandekar and Ashutosh Bapat
Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
Historically we've always materialized the full output of a CTE query,
treating WITH as an optimization fence (so that, for example, restrictions
from the outer query cannot be pushed into it). This is appropriate when
the CTE query is INSERT/UPDATE/DELETE, or is recursive; but when the CTE
query is non-recursive and side-effect-free, there's no hazard of changing
the query results by pushing restrictions down.
Another argument for materialization is that it can avoid duplicate
computation of an expensive WITH query --- but that only applies if
the WITH query is called more than once in the outer query. Even then
it could still be a net loss, if each call has restrictions that
would allow just a small part of the WITH query to be computed.
Hence, let's change the behavior for WITH queries that are non-recursive
and side-effect-free. By default, we will inline them into the outer
query (removing the optimization fence) if they are called just once.
If they are called more than once, we will keep the old behavior by
default, but the user can override this and force inlining by specifying
NOT MATERIALIZED. Lastly, the user can force the old behavior by
specifying MATERIALIZED; this would mainly be useful when the query had
deliberately been employing WITH as an optimization fence to prevent a
poor choice of plan.
Andreas Karlsson, Andrew Gierth, David Fetter
Discussion: https://postgr.es/m/87sh48ffhb.fsf@news-spur.riddles.org.uk
Add support function requests for estimating the selectivity, cost,
and number of result rows (if a SRF) of the target function.
The lack of a way to estimate selectivity of a boolean-returning
function in WHERE has been a recognized deficiency of the planner
since Berkeley days. This commit finally fixes it.
In addition, non-constant estimates of cost and number of output
rows are now possible. We still fall back to looking at procost
and prorows if the support function doesn't service the request,
of course.
To make concrete use of the possibility of estimating output rowcount
for SRFs, this commit adds support functions for array_unnest(anyarray)
and the integer variants of generate_series; the lack of plausible
rowcount estimates for those, even when it's obvious to a human,
has been a repeated subject of complaints. Obviously, much more
could now be done in this line, but I'm mostly just trying to get
the infrastructure in place.
Discussion: https://postgr.es/m/15193.1548028093@sss.pgh.pa.us
Up to now postgres_fdw has been using create_foreignscan_path() to
generate not only base-relation paths, but also paths for foreign joins
and foreign upperrels. This is wrong, because create_foreignscan_path()
calls get_baserel_parampathinfo() which will only do the right thing for
baserels. It accidentally fails to fail for unparameterized paths, which
are the only ones postgres_fdw (thought it) was handling, but we really
need different APIs for the baserel and join cases.
In HEAD, the best thing to do seems to be to split up the baserel,
joinrel, and upperrel cases into three functions so that they can
have different APIs. I haven't actually given create_foreign_join_path
a different API in this commit: we should spend a bit of time thinking
about just what we want to do there, since perhaps FDWs would want to
do something different from the build-up-a-join-pairwise approach that
get_joinrel_parampathinfo expects. In the meantime, since postgres_fdw
isn't prepared to generate parameterized joins anyway, just give it a
defense against trying to plan joins with lateral refs.
In addition (and this is what triggered this whole mess) fix bug #15613
from Srinivasan S A, by teaching file_fdw and postgres_fdw that plain
baserel foreign paths still have outer refs if the relation has
lateral_relids. Add some assertions in relnode.c to catch future
occurrences of the same error --- in particular, to catch other FDWs
doing that, but also as backstop against core-code mistakes like the
one fixed by commit bdd9a99aa.
Bug #15613 also needs to be fixed in the back branches, but the
appropriate fix will look quite a bit different there, since we don't
want to assume that existing FDWs get the word right away.
Discussion: https://postgr.es/m/15613-092be1be9576c728@postgresql.org