With the introduction of PgStat_Kind PgStat_Single_Reset_Type,
PgStat_Shared_Reset_Target don't make sense anymore. Replace them with
PgStat_Kind.
Instead of having dedicated reset functions for different kinds of stats, use
two generic helper routines (one to reset all stats of a kind, one to reset
one stats entry).
A number of reset functions were named pgstat_reset_*_counter(), despite
affecting multiple counters. The generic helper routines get rid of
pgstat_reset_single_counter(), pgstat_reset_subscription_counter().
Rename pgstat_reset_slru_counter(), pgstat_reset_replslot_counter() to
pgstat_reset_slru(), pgstat_reset_replslot() respectively, and have them only
deal with a single SLRU/slot. Resetting all SLRUs/slots goes through the
generic pgstat_reset_of_kind().
Previously pg_stat_reset_replication_slot() used SearchNamedReplicationSlot()
to check if a slot exists. API wise it seems better to move that to
pgstat_replslot.c.
This is done separately from the - quite large - shared memory statistics
patch to make review easier.
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20220404041516.cctrvpadhuriawlq@alap3.anarazel.de
Until now index_concurrently_swap() directly modified pgstat internal
datastructures. That will break with the introduction of shared memory
statistics and seems off architecturally.
This is done separately from the - quite large - shared memory statistics
patch to make review easier.
Author: Andres Freund <andres@anarazel.de>
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
Only the pgstat_send_* functions that are called from outside pgstat*.c are
renamed (the rest will go away). This is done separately from the - quite
large - shared memory statistics patch to make review easier.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20220404041516.cctrvpadhuriawlq@alap3.anarazel.de
Soon the stats collector will be no more, with statistics instead getting
stored in shared memory. There are a lot of references to the stats collector
in comments. This commit replaces most of these references with "cumulative
statistics system", with the remaining ones getting replaced as part of
subsequent commits.
This is done separately from the - quite large - shared memory statistics
patch to make review easier.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
Discussion: https://postgr.es/m/20220308205351.2xcn6k4x5yivcxyd@alap3.anarazel.de
The transactional integration code is largely independent from the rest of
pgstat.c. Subsequent commits will add more related code.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/20220404041516.cctrvpadhuriawlq@alap3.anarazel.de
It might seem pointless to allow use of dsm in single user mode, but otherwise
subsystems might need dedicated single user mode code paths.
Besides changing the assert, all that's needed is to make some windows code
assuming the presence of postmaster conditional.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/CA+hUKGL9hY_VY=+oUK+Gc1iSRx-Ls5qeYJ6q=dQVZnT3R63Taw@mail.gmail.com
Exclusive-mode backups have been deprecated since 9.6 (when
non-exclusive backups were introduced) due to the issues
they can cause should the system crash while one is running and
generally because non-exclusive provides a much better interface.
Further, exclusive backup mode wasn't really being tested (nor was most
of the related code- like being able to log in just to stop an exclusive
backup and the bits of the state machine related to that) and having to
possibly deal with an exclusive backup and the backup_label file
existing during pg_basebackup, pg_rewind, etc, added other complexities
that we are better off without.
This patch removes the exclusive backup mode, the various special cases
for dealing with it, and greatly simplifies the online backup code and
documentation.
Authors: David Steele, Nathan Bossart
Reviewed-by: Chapman Flack
Discussion: https://postgr.es/m/ac7339ca-3718-3c93-929f-99e725d1172c@pgmasters.nethttps://postgr.es/m/CAHg+QDfiM+WU61tF6=nPZocMZvHDzCK47Kneyb0ZRULYzV5sKQ@mail.gmail.com
This patch allows "PGC_SUSET" parameters to be set by non-superusers
if they have been explicitly granted the privilege to do so.
The privilege to perform ALTER SYSTEM SET/RESET on a specific parameter
can also be granted.
Such privileges are cluster-wide, not per database. They are tracked
in a new shared catalog, pg_parameter_acl.
Granting and revoking these new privileges works as one would expect.
One caveat is that PGC_USERSET GUCs are unaffected by the SET privilege
--- one could wish that those were handled by a revocable grant to
PUBLIC, but they are not, because we couldn't make it robust enough
for GUCs defined by extensions.
Mark Dilger, reviewed at various times by Andrew Dunstan, Robert Haas,
Joshua Brindle, and myself
Discussion: https://postgr.es/m/3D691E20-C1D5-4B80-8BA5-6BEB63AF3029@enterprisedb.com
In commit 27e1f1456, create_append_plan() only allowed the subplan
created from a given subpath to be executed asynchronously when it was
an async-capable ForeignPath. To extend coverage, this patch handles
cases when the given subpath includes some other Path types as well that
can be omitted in the plan processing, such as a ProjectionPath directly
atop an async-capable ForeignPath, allowing asynchronous execution in
partitioned-scan/partitioned-join queries with non-Var tlist expressions
and more UNION queries.
Andrey Lepikhov and Etsuro Fujita, reviewed by Alexander Pyhalov and
Zhihong Yu.
Discussion: https://postgr.es/m/659c37a8-3e71-0ff2-394c-f04428c76f08%40postgrespro.ru
These clauses allow the user to specify how data from nested paths are
joined, allowing considerable freedom in shaping the tabular output of
JSON_TABLE.
PLAN DEFAULT allows the user to specify the global strategies when
dealing with sibling or child nested paths. The is often sufficient to
achieve the necessary goal, and is considerably simpler than the full
PLAN clause, which allows the user to specify the strategy to be used
for each named nested path.
Nikita Glukhov
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zhihong Yu,
Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby.
Discussion: https://postgr.es/m/7e2cb85d-24cf-4abb-30a5-1a33715959bd@postgrespro.ru
Commits 74cf7d46 and a61daa14 fixed pg_upgrade bugs involving oversights
in how relfrozenxid or relminmxid are carried forward or initialized.
Corruption caused by bugs of this nature was ameliorated by commit
78db307bb2, which taught VACUUM to always overwrite existing invalid
relfrozenxid or relminmxid values that are apparently "in the future".
Extend that work now by showing a warning in the event of overwriting
either relfrozenxid or relminmxid due to an existing value that is "in
the future". There is probably a decent chance that the sanity checks
added by commit 699bf7d05c will raise an error before VACUUM reaches
this point, but we shouldn't rely on that.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CAH2-WzmRZEzeGvLv8yDW0AbFmSvJjTziORqjVUrf74mL4GL0Ww@mail.gmail.com
* Move the execution pruning initialization steps that are common
between both ExecInitAppend() and ExecInitMergeAppend() into a new
function ExecInitPartitionPruning() defined in execPartition.c.
Those steps include creation of a PartitionPruneState to be used for
all instances of pruning and determining the minimal set of child
subplans that need to be initialized by performing initial pruning if
needed, and finally adjusting the subplan_map arrays in the
PartitionPruneState to reflect the new set of subplans remaining
after initial pruning if it was indeed performed.
ExecCreatePartitionPruneState() is no longer exported out of
execPartition.c and has been renamed to CreatePartitionPruneState()
as a local sub-routine of ExecInitPartitionPruning().
* Likewise, ExecFindInitialMatchingSubPlans() that was in charge of
performing initial pruning no longer needs to be exported. In fact,
since it would now have the same body as the more generally named
ExecFindMatchingSubPlans(), except differing in the value of
initial_prune passed to the common subroutine
find_matching_subplans_recurse(), it seems better to remove it and add
an initial_prune argument to ExecFindMatchingSubPlans().
* Add an ExprContext field to PartitionPruneContext to remove the
implicit assumption in the runtime pruning code that the ExprContext to
use to compute pruning expressions that need one can always rely on the
PlanState providing it. A future patch will allow runtime pruning (at
least the initial pruning steps) to be performed without the
corresponding PlanState yet having been created, so this will help.
Author: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/CA+HiwqEYCpEqh2LMDOp9mT+4-QoVe8HgFMKBjntEMCTZLpcCCA@mail.gmail.com
The previous coding of dshash_seq_next(), on the first call, accessed
status->hash_table->size_log2 without holding a partition lock and without
guaranteeing that ensure_valid_bucket_pointers() had ever been called.
That oversight turns out to not have immediately visible effects, because
bucket 0 is always in partition 0, and ensure_valid_bucket_pointers() was
called after acquiring the partition lock. However,
PARTITION_FOR_BUCKET_INDEX() with a size_log2 of 0 ends up triggering formally
undefined behaviour.
Simplify by accessing partition 0, without using PARTITION_FOR_BUCKET_INDEX().
While at it, remove dshash_get_current(), there is no convincing use
case. Also polish a few comments.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/CA+hUKGL9hY_VY=+oUK+Gc1iSRx-Ls5qeYJ6q=dQVZnT3R63Taw@mail.gmail.com
This feature allows jsonb data to be treated as a table and thus used in
a FROM clause like other tabular data. Data can be selected from the
jsonb using jsonpath expressions, and hoisted out of nested structures
in the jsonb to form multiple rows, more or less like an outer join.
Nikita Glukhov
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zhihong Yu (whose
name I previously misspelled), Himanshu Upadhyaya, Daniel Gustafsson,
Justin Pryzby.
Discussion: https://postgr.es/m/7e2cb85d-24cf-4abb-30a5-1a33715959bd@postgrespro.ru
Commit f4fb45d15c tried to free memory during aggregate finalization.
This cause issues, particularly when used as a window function, so stop
doing that.
Per complaint by Jaime Casanova and diagnosis by Andres Freund
Discussion: https://postgr.es/m/YkfeMNYRCGhySKyg@ahch-to
The general usage pattern when we store tuples in tuplesort.c is that
we store a series of tuples one by one then either perform a sort or spill
them to disk. In the common case, there is no pfreeing of already stored
tuples. For the common case since we do not individually pfree tuples, we
have very little need for aset.c memory allocation behavior which
maintains freelists and always rounds allocation sizes up to the next
power of 2 size.
Here we conditionally use generation.c contexts for storing tuples in
tuplesort.c when the sort will never be bounded. Unfortunately, the
memory context to store tuples is already created by the time any calls
would be made to tuplesort_set_bound(), so here we add a new sort option
that allows callers to specify if they're going to need a bounded sort or
not. We'll use a standard aset.c allocator when this sort option is not
set.
Extension authors must ensure that the TUPLESORT_ALLOWBOUNDED flag is
used when calling tuplesort_begin_* for any sorts that make a call to
tuplesort_set_bound().
Author: David Rowley
Reviewed-by: Andy Fan
Discussion: https://postgr.es/m/CAApHDvoH4ASzsAOyHcxkuY01Qf++8JJ0paw+03dk+W25tQEcNQ@mail.gmail.com
This replaces the bool flag for randomAccess. An upcoming patch requires
adding another option, so instead of breaking the API for that, then
breaking it again one day if we add more options, let's just break it
once. Any boolean options we add in the future will just make use of an
unused bit in the flags.
Any extensions making use of tuplesorts will need to update their code
to pass TUPLESORT_RANDOMACCESS instead of true for randomAccess.
TUPLESORT_NONE can be used for a set of empty options.
Author: David Rowley
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/CAApHDvoH4ASzsAOyHcxkuY01Qf%2B%2B8JJ0paw%2B03dk%2BW25tQEcNQ%40mail.gmail.com
Here we make a series of improvements to the generation memory
allocator, namely:
1. Allow generation contexts to have a minimum, initial and maximum block
sizes. The standard allocator allows this already but when the generation
context was added, it only allowed fixed-sized blocks. The problem with
fixed-sized blocks is that it's difficult to choose how large to make the
blocks. If the chosen size is too small then we'd end up with a large
number of blocks and a large number of malloc calls. If the block size is
made too large, then memory is wasted.
2. Add support for "keeper" blocks. This is a special block that is
allocated along with the context itself but is never freed. Instead,
when the last chunk in the keeper block is freed, we simply mark the block
as empty to allow new allocations to make use of it.
3. Add facility to "recycle" newly empty blocks instead of freeing them
and having to later malloc an entire new block again. We do this by
recording a single GenerationBlock which has become empty of any chunks.
When we run out of space in the current block, we check to see if there is
a "freeblock" and use that if it contains enough space for the allocation.
Author: David Rowley, Tomas Vondra
Reviewed-by: Andy Fan
Discussion: https://postgr.es/m/d987fd54-01f8-0f73-af6c-519f799a0ab8@enterprisedb.com
When dispatching sort operations to specialized variants, commit
69749243 failed to handle the case where CLUSTER-sort decides not to
initialize datum1 and isnull1. Fix by hoisting that decision up a level
and advertising whether datum1 can be relied on, in the Tuplesortstate
object.
Per reports from UBsan and Valgrind build farm animals, while running
the cluster.sql test.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CAFBsxsF1TeK5Fic0M%2BTSJXzbKsY6aBqJGNj6ptURuB09ZF6k_w%40mail.gmail.com
datetime.c's parsing logic has assumed that strtod() will accept
a string that looks like ".", which it does in glibc, but not on
some less-common platforms such as AIX. The result of this was
that datetime fields like "123." would be accepted on some platforms
but not others; which is a sufficiently odd case that it's not that
surprising we've heard no field complaints. But commit e39f99046
extended that assumption to new places, and happened to add a test
case that exposed the platform dependency. Remove this dependency
by special-casing situations without any digits after the decimal
point.
(Again, this is in part a pre-existing bug but I don't feel a
compulsion to back-patch.)
Also, rearrange e39f99046's changes in formatting.c to avoid a
Coverity complaint that we were copying an uninitialized field.
Discussion: https://postgr.es/m/1592893.1648969747@sss.pgh.pa.us
Non-aggressive VACUUMs were at a gratuitous disadvantage (relative to
aggressive VACUUMs) around advancing relfrozenxid and relminmxid before
now. The issue only came up when concurrent activity unset some heap
page's visibility map bit right as VACUUM was considering if the page
should get counted in frozenskipped_pages. The non-aggressive case
would recheck the all-frozen bit at this point. The aggressive case
reasoned that the page (a skippable page) must have at least been
all-frozen in the recent past, so skipping it won't make relfrozenxid
advancement unsafe (which is never okay for aggressive VACUUMs).
The recheck created a window for some other backend to confuse matters
for VACUUM. If the page's VM bit turned out to be unset, VACUUM would
conclude that the page was _never_ all-frozen. frozenskipped_pages was
not incremented, and yet VACUUM couldn't back out of skipping at this
late stage (it couldn't choose to scan the page instead). This made it
unsafe to advance relfrozenxid later on.
Consistently avoid the issue by generalizing how we skip frozen pages
during aggressive VACUUMs: take the same approach when skipping any
skippable page range during aggressive and non-aggressive VACUUMs alike.
The new approach makes ranges (not individual pages) the fundamental
unit of skipping using the visibility map. frozenskipped_pages is
replaced with a boolean flag that represents whether some skippable
range with one or more all-visible pages was actually skipped.
It is safe for VACUUM to treat a page as all-frozen provided it at least
had its all-frozen bit set after the OldestXmin cutoff was established.
VACUUM is only required to scan pages that might have XIDs < OldestXmin
(unfrozen XIDs) to be able to safely advance relfrozenxid. Tuples
concurrently inserted on "skipped" pages can be thought of as equivalent
to tuples concurrently inserted on a block >= rel_pages.
It's possible that the issue this commit fixes hardly ever came up in
practice. But we only had to be unlucky once to lose out on advancing
relfrozenxid -- a single affected heap page was enough to throw VACUUM
off. That seems like something to avoid on general principle. This is
similar to an issue fixed by commit 44fa8488, which taught vacuumlazy.c
to not give up on non-aggressive relfrozenxid advancement just because a
cleanup lock wasn't immediately available on some heap page.
Skipping an all-visible range is now explicitly structured as a choice
made by non-aggressive VACUUMs, by weighing known costs (scanning extra
skippable pages to freeze their tuples early) against known benefits
(advancing relfrozenxid early). This works in essentially the same way
as it always has (don't skip ranges < SKIP_PAGES_THRESHOLD). We could
do much better here in the future by considering other relevant factors.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/CAH2-Wzn6bGJGfOy3zSTJicKLw99PHJeSOQBOViKjSCinaxUKDQ@mail.gmail.com
Discussion: https://postgr.es/m/CA%2BTgmoZiSOY6H7aadw5ZZGm7zYmfDzL6nwmL5V7GL4HgJgLF_w%40mail.gmail.com
When VACUUM set relfrozenxid before now, it set it to whatever value was
used to determine which tuples to freeze -- the FreezeLimit cutoff.
This approach was very naive. The relfrozenxid invariant only requires
that new relfrozenxid values be <= the oldest extant XID remaining in
the table (at the point that the VACUUM operation ends), which in
general might be much more recent than FreezeLimit.
VACUUM now carefully tracks the oldest remaining XID/MultiXactId as it
goes (the oldest remaining values _after_ lazy_scan_prune processing).
The final values are set as the table's new relfrozenxid and new
relminmxid in pg_class at the end of each VACUUM. The oldest XID might
come from a tuple's xmin, xmax, or xvac fields. It might even come from
one of the table's remaining MultiXacts.
Final relfrozenxid values must still be >= FreezeLimit in an aggressive
VACUUM (FreezeLimit still acts as a lower bound on the final value that
aggressive VACUUM can set relfrozenxid to). Since standard VACUUMs
still make no guarantees about advancing relfrozenxid, they might as
well set relfrozenxid to a value from well before FreezeLimit when the
opportunity presents itself. In general standard VACUUMs may now set
relfrozenxid to any value > the original relfrozenxid and <= OldestXmin.
Credit for the general idea of using the oldest extant XID to set
pg_class.relfrozenxid at the end of VACUUM goes to Andres Freund.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Andres Freund <andres@anarazel.de>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/CAH2-WzkymFbz6D_vL+jmqSn_5q1wsFvFrE+37yLgL_Rkfd6Gzg@mail.gmail.com
DecodeInterval (interval input) was careless about integer-overflow
hazards, allowing bogus results to be obtained for sufficiently
large input values. Also, since it initially converted the input
to a "struct tm", it was impossible to produce the full range of
representable interval values.
Meanwhile, EncodeInterval (interval output) and a few other
functions could suffer failures if asked to process sufficiently
large interval values, because they also relied on being able to
represent an interval in "struct tm" which is not designed to
handle that.
Fix all this stuff by introducing new struct types that are more
fit for purpose.
While this is clearly a bug fix, it's also an API break for any
code that's calling these functions directly. So back-patching
doesn't seem wise, especially in view of the lack of field
complaints.
Joe Koshakow, editorialized a bit by me
Discussion: https://postgr.es/m/CAAvxfHff0JLYHwyBrtMx_=6wr=k2Xp+D+-X3vEhHjJYMj+mQcg@mail.gmail.com
Move some of the heap_vacuum_rel() instrumentation related variables to
the scope where they're actually needed. Also reorder some of the
variable declarations at the start of heap_vacuum_rel() so that related
variables appear together.
This is essentially the same as applying VACUUM FULL to a partitioned
table, which has been supported since commit 3c3bb99330 (March 2017).
While there's no great use case in applying CLUSTER to partitioned
tables, we don't have any strong reason not to allow it either.
For now, partitioned indexes cannot be marked clustered, so an index
must always be specified.
While at it, rename some variables that were RangeVars during the
development that led to 8bc717cb88 but never made it that way to the
source tree; there's no need to perpetuate names that have always been
more confusing than helpful.
Author: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/20201028003312.GU9241@telsasoft.com
Discussion: https://postgr.es/m/20200611153502.GT14879@telsasoft.com
Previously, the specialized tuplesort routine inlined handling for
reverse-sort and NULLs-ordering but called the datum comparator via a
pointer in the SortSupport struct parameter. Testing has showed that we
can get a useful performance gain by specializing datum comparison for
the different representations of abbreviated keys -- signed and unsigned
64-bit integers and signed 32-bit integers. Almost all abbreviatable data
types will benefit -- the only exception for now is numeric, since the
datum comparison is more complex. The performance gain depends on data
type and input distribution, but often falls in the range of 10-20% faster.
Thomas Munro
Reviewed by Peter Geoghegan, review and performance testing by me
Discussion:
https://www.postgresql.org/message-id/CA%2BhUKGKKYttZZk-JMRQSVak%3DCXSJ5fiwtirFf%3Dn%3DPAbumvn1Ww%40mail.gmail.com
This makes the code more consistent with SpGiST, GiST and GIN, that
already use this style, and the idea is to make easier the introduction
of more sanity checks for each of these AM-specific macros. BRIN uses a
different set of macros to get a page's type and flags, so it has no
need for something similar.
Author: Matthias van de Meent
Discussion: https://postgr.es/m/CAEze2WjE3+tGO9Fs9+iZMU+z6mMZKo54W1Zt98WKqbEUHbHOBg@mail.gmail.com
This patch is extracted from a larger patch that allowed setting the
default returned value from these functions to json or jsonb. That had
problems, but this piece of it is fine. For these functions only json or
jsonb can be specified in the RETURNING clause.
Extracted from an original patch from Nikita Glukhov
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zihong Yu,
Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby.
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
postgres_fdw would push ORDER BY clauses to the remote side without
verifying that the sort operator is safe to ship. Moreover, it failed
to print a suitable USING clause if the sort operator isn't default
for the sort expression's type. The net result of this is that the
remote sort might not have anywhere near the semantics we expect,
which'd be disastrous for locally-performed merge joins in particular.
We addressed similar issues in the context of ORDER BY within an
aggregate function call in commit 7012b132d, but failed to notice
that query-level ORDER BY was broken. Thus, much of the necessary
logic already existed, but it requires refactoring to be usable
in both cases.
Back-patch to all supported branches. In HEAD only, remove the
core code's copy of find_em_expr_for_rel, which is no longer used
and really should never have been pushed into equivclass.c in the
first place.
Ronan Dunklau, per report from David Rowley;
reviews by David Rowley, Ranier Vilela, and myself
Discussion: https://postgr.es/m/CAApHDvr4OeC2DBVY--zVP83-K=bYrTD7F8SZDhN4g+pj2f2S-A@mail.gmail.com
When we create or alter a subscription to add publications raise a warning
for non-existent publications. We don't want to give an error here because
it is possible that users can later create the missing publications.
Author: Vignesh C
Reviewed-by: Bharath Rupireddy, Japin Li, Dilip Kumar, Euler Taveira, Ashutosh Sharma, Amit Kapila
Discussion: https://postgr.es/m/CALDaNm0f4YujGW+q-Di0CbZpnQKFFrXntikaQQKuEmGG0=Zw=Q@mail.gmail.com
When evaluating a query with a multi-column GROUP BY clause using sort,
the cost may be heavily dependent on the order in which the keys are
compared when building the groups. Grouping does not imply any ordering,
so we're allowed to compare the keys in arbitrary order, and a Hash Agg
leverages this. But for Group Agg, we simply compared keys in the order
as specified in the query. This commit explores alternative ordering of
the keys, trying to find a cheaper one.
In principle, we might generate grouping paths for all permutations of
the keys, and leave the rest to the optimizer. But that might get very
expensive, so we try to pick only a couple interesting orderings based
on both local and global information.
When planning the grouping path, we explore statistics (number of
distinct values, cost of the comparison function) for the keys and
reorder them to minimize comparison costs. Intuitively, it may be better
to perform more expensive comparisons (for complex data types etc.)
last, because maybe the cheaper comparisons will be enough. Similarly,
the higher the cardinality of a key, the lower the probability we’ll
need to compare more keys. The patch generates and costs various
orderings, picking the cheapest ones.
The ordering of group keys may interact with other parts of the query,
some of which may not be known while planning the grouping. E.g. there
may be an explicit ORDER BY clause, or some other ordering-dependent
operation, higher up in the query, and using the same ordering may allow
using either incremental sort or even eliminate the sort entirely.
The patch generates orderings and picks those minimizing the comparison
cost (for various pathkeys), and then adds orderings that might be
useful for operations higher up in the plan (ORDER BY, etc.). Finally,
it always keeps the ordering specified in the query, on the assumption
the user might have additional insights.
This introduces a new GUC enable_group_by_reordering, so that the
optimization may be disabled if needed.
The original patch was proposed by Teodor Sigaev, and later improved and
reworked by Dmitry Dolgov. Reviews by a number of people, including me,
Andrey Lepikhov, Claudio Freire, Ibrar Ahmed and Zhihong Yu.
Author: Dmitry Dolgov, Teodor Sigaev, Tomas Vondra
Reviewed-by: Tomas Vondra, Andrey Lepikhov, Claudio Freire, Ibrar Ahmed, Zhihong Yu
Discussion: https://postgr.es/m/7c79e6a5-8597-74e8-0671-1c39d124c9d6%40sigaev.ru
Discussion: https://postgr.es/m/CA%2Bq6zcW_4o2NC0zutLkOJPsFt80megSpX_dVRo6GK9PC-Jx_Ag%40mail.gmail.com
This Patch introduces three SQL standard JSON functions:
JSON() (incorrectly mentioned in my commit message for f4fb45d15c)
JSON_SCALAR()
JSON_SERIALIZE()
JSON() produces json values from text, bytea, json or jsonb values, and
has facilitites for handling duplicate keys.
JSON_SCALAR() produces a json value from any scalar sql value, including
json and jsonb.
JSON_SERIALIZE() produces text or bytea from input which containis or
represents json or jsonb;
For the most part these functions don't add any significant new
capabilities, but they will be of use to users wanting standard
compliant JSON handling.
Nikita Glukhov
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zihong Yu,
Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby.
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
libzstd allows transparent parallel compression just by setting
an option when creating the compression context, so permit that
for both client and server-side backup compression. To use this,
use something like pg_basebackup --compress WHERE-zstd:workers=N
where WHERE is "client" or "server" and N is an integer.
When compression is performed on the server side, this will spawn
threads inside the PostgreSQL backend. While there is almost no
PostgreSQL server code which is thread-safe, the threads here are used
internally by libzstd and touch only data structures controlled by
libzstd.
Patch by me, based in part on earlier work by Dipesh Pandit
and Jeevan Ladhe. Reviewed by Justin Pryzby.
Discussion: http://postgr.es/m/CA+Tgmobj6u-nWF-j=FemygUhobhryLxf9h-wJN7W-2rSsseHNA@mail.gmail.com
COPY FROM supports the HEADER option to silently discard the header
line from a CSV or text file. It is possible to load by mistake a
file that matches the expected format, for example, if two text
columns have been swapped, resulting in garbage in the database.
This adds a new option value HEADER MATCH that checks the column names
in the header line against the actual column names and errors out if
they do not match.
Author: Rémi Lapeyre <remi.lapeyre@lenstra.fr>
Reviewed-by: Daniel Verite <daniel@manitou-mail.org>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/CAF1-J-0PtCWMeLtswwGV2M70U26n4g33gpe1rcKQqe6wVQDrFA@mail.gmail.com
The current logical replication behavior is to send every transaction to
subscriber even if the transaction is empty. This can happen because
transaction doesn't contain changes from the selected publications or all
the changes got filtered. It is a waste of CPU cycles and network
bandwidth to build/transmit these empty transactions.
This patch addresses the above problem by postponing the BEGIN message
until the first change is sent. While processing a COMMIT message, if
there was no other change for that transaction, do not send the COMMIT
message. This allows us to skip sending BEGIN/COMMIT messages for empty
transactions.
When skipping empty transactions in synchronous replication mode, we send
a keepalive message to avoid delaying such transactions.
Author: Ajin Cherian, Hou Zhijie, Euler Taveira
Reviewed-by: Peter Smith, Takamichi Osumi, Shi Yu, Masahiko Sawada, Greg Nancarrow, Vignesh C, Amit Kapila
Discussion: https://postgr.es/m/CAMkU=1yohp9-dv48FLoSPrMqYEyyS5ZWkaZGD41RJr10xiNo_Q@mail.gmail.com
This introduces the SQL/JSON functions for querying JSON data using
jsonpath expressions. The functions are:
JSON_EXISTS()
JSON_QUERY()
JSON_VALUE()
All of these functions only operate on jsonb. The workaround for now is
to cast the argument to jsonb.
JSON_EXISTS() tests if the jsonpath expression applied to the jsonb
value yields any values. JSON_VALUE() must return a single value, and an
error occurs if it tries to return multiple values. JSON_QUERY() must
return a json object or array, and there are various WRAPPER options for
handling scalar or multi-value results. Both these functions have
options for handling EMPTY and ERROR conditions.
Nikita Glukhov
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zihong Yu,
Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby.
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
Because this strategy logs changes on a block-by-block basis, it
avoids the need to checkpoint before and after the operation.
However, because it logs each changed block individually, it might
generate a lot of extra write-ahead logging if the template database
is large. Therefore, the older strategy remains available via a new
STRATEGY parameter to CREATE DATABASE, and a corresponding --strategy
option to createdb.
Somewhat controversially, this patch assembles the list of relations
to be copied to the new database by reading the pg_class relation of
the template database. Cross-database access like this isn't normally
possible, but it can be made to work here because there can't be any
connections to the database being copied, nor can it contain any
in-doubt transactions. Even so, we have to use lower-level interfaces
than normal, since the table scan and relcache interfaces will not
work for a database to which we're not connected. The advantage of
this approach is that we do not need to rely on the filesystem to
determine what ought to be copied, but instead on PostgreSQL's own
knowledge of the database structure. This avoids, for example,
copying stray files that happen to be located in the source database
directory.
Dilip Kumar, with a fairly large number of cosmetic changes by me.
Reviewed and tested by Ashutosh Sharma, Andres Freund, John Naylor,
Greg Nancarrow, Neha Sharma. Additional feedback from Bruce Momjian,
Heikki Linnakangas, Julien Rouhaud, Adam Brusselback, Kyotaro
Horiguchi, Tomas Vondra, Andrew Dunstan, Álvaro Herrera, and others.
Discussion: http://postgr.es/m/CA+TgmoYtcdxBjLh31DLxUXHxFVMPGzrU5_T=CYCvRyFHywSBUQ@mail.gmail.com
Andres Freund
Tom Lane
Stephen Frost
Peter Eisentraut
Etsuro Fujita
Amit Kapila
Andrew Dunstan
Peter Geoghegan
Alvaro Herrera
David Rowley
Thomas Munro
Joe Conway
John Naylor
Michael Paquier
Tomas Vondra
Robert Haas