from Abhijit Menon-Sen, minor editorialization from Neil Conway. Also,
improve md5(text) to allocate a constant-sized buffer on the stack
rather than via palloc.
Catalog version bumped.
- make sure we always invoke user-supplied GiST methods in a short-lived
memory context. This means the backend isn't exposed to any memory leaks
that be in those methods (in fact, it is probably a net loss for most
GiST methods to bother manually freeing memory now). This also means
we can do away with a lot of ugly manual memory management in the
GiST code itself.
- keep the current page of a GiST index scan pinned, rather than doing a
ReadBuffer() for each tuple produced by the scan. Since ReadBuffer() is
expensive, this is a perf. win
- implement dead tuple killing for GiST indexes (which is easy to do, now
that we keep a pin on the current scan page). Now all the builtin indexes
implement dead tuple killing.
- cleanup a lot of ugly code in GiST
* Add session start time to pg_stat_activity
* Add the client IP address and port to pg_stat_activity
Original patch from Magnus Hagander, code review by Neil Conway. Catalog
version bumped. This patch sends the client IP address and port number in
every statistics message; that's not ideal, but will be fixed up shortly.
output area as INTERNAL not CSTRING. This is to prevent people from
calling the functions by hand. This is a permanent solution for the
back branches but I hope it is just a stopgap for HEAD.
to produce when running the executor. This is consistent with the internal
executor APIs (such as ExecutorRun), which also use a long for this purpose.
It also allows FETCH_ALL to be passed -- since FETCH_ALL is defined as
LONG_MAX, this wouldn't have worked on platforms where int and long are of
different sizes. Per report from Tzahi Fadida.
only one argument. (Per recent discussion, the option to accept multiple
arguments is pretty useless for user-defined types, and would be a likely
source of security holes if it was used.) Simplify call sites of
output/send functions to not bother passing more than one argument.
to eliminate unnecessary deadlocks. This commit adds SELECT ... FOR SHARE
paralleling SELECT ... FOR UPDATE. The implementation uses a new SLRU
data structure (managed much like pg_subtrans) to represent multiple-
transaction-ID sets. When more than one transaction is holding a shared
lock on a particular row, we create a MultiXactId representing that set
of transactions and store its ID in the row's XMAX. This scheme allows
an effectively unlimited number of row locks, just as we did before,
while not costing any extra overhead except when a shared lock actually
has to be shared. Still TODO: use the regular lock manager to control
the grant order when multiple backends are waiting for a row lock.
Alvaro Herrera and Tom Lane.
logic operations during planning. Seems cleaner to create two new Path
node types, instead --- this avoids duplication of cost-estimation code.
Also, create an enable_bitmapscan GUC parameter to control use of bitmap
plans.
>>>
>>>No, and I think it should be in the manual as an example.
>>>
>>>You will need to enter a loop that uses exception handling to detect
>>>unique_violation.
>>
>>Pursuant to an IRC discussion to which Dennis Bjorklund and
>>Christopher Kings-Lynne made most of the contributions, please find
>>enclosed an example patch demonstrating an UPSERT-like capability.
>>
David Fetter
>
> No, and I think it should be in the manual as an example.
>
> You will need to enter a loop that uses exception handling to detect
> unique_violation.
Pursuant to an IRC discussion to which Dennis Bjorklund and
Christopher Kings-Lynne made most of the contributions, please find
enclosed an example patch demonstrating an UPSERT-like capability.
David Fetter
indexes. Extend the macros in include/catalog/*.h to carry the info
about hand-assigned OIDs, and adjust the genbki script and bootstrap
code to make the relations actually get those OIDs. Remove the small
number of RelOid_pg_foo macros that we had in favor of a complete
set named like the catname.h and indexing.h macros. Next phase will
get rid of internal use of names for looking up catalogs and indexes;
but this completes the changes forcing an initdb, so it looks like a
good place to commit.
Along the way, I made the shared relations (pg_database etc) not be
'bootstrap' relations any more, so as to reduce the number of hardwired
entries and simplify changing those relations in future. I'm not
sure whether they ever really needed to be handled as bootstrap
relations, but it seems to work fine to not do so now.
avoid encroaching on the 'user' range of OIDs by allowing automatic
OID assignment to use values below 16k until we reach normal operation.
initdb not forced since this doesn't make any incompatible change;
however a lot of stuff will have different OIDs after your next initdb.
be supported for all datatypes. Add CREATE AGGREGATE and pg_dump support
too. Add specialized min/max aggregates for bpchar, instead of depending
on text's min/max, because otherwise the possible use of bpchar indexes
cannot be recognized.
initdb forced because of catalog changes.
the long-term plan for this behavior for quite some time, but it is only
possible now that DELETE has a USING clause so that the user can join
other tables in a DELETE statement without relying on this behavior.
output parameters or VOID or a set. There seems no particular reason to
insist on a RETURN in these cases, since the function return value is
determined by other elements anyway. Per recent discussion.
in UPDATE. We also now issue a NOTICE if a query has _any_ implicit
range table entries -- in the past, we would only warn about implicit
RTEs in SELECTs with at least one explicit RTE.
As a result of the warning change, 25 of the regression tests had to
be updated. I also took the opportunity to remove some bogus whitespace
differences between some of the float4 and float8 variants. I believe
I have correctly updated all the platform-specific variants, but let
me know if that's not the case.
Original patch for DELETE ... USING from Euler Taveira de Oliveira,
reworked by Neil Conway.
OPENed on non-SELECT commands such as EXPLAIN or SHOW (anything that
returns tuples is allowed). This flexibility already existed for
bound cursors, but OPEN was artificially restricting what it would
take. Per a gripe some months back.
proposal for OUT parameter support. The columns don't actually *do*
anything yet, they are just left NULLs. But I thought I'd commit this
part separately as a fairly pure example of the tasks needed when adding
a column to pg_proc or one of the other core system tables.
change saves a great deal of space in pg_proc and its primary index,
and it eliminates the former requirement that INDEX_MAX_KEYS and
FUNC_MAX_ARGS have the same value. INDEX_MAX_KEYS is still embedded
in the on-disk representation (because it affects index tuple header
size), but FUNC_MAX_ARGS is not. I believe it would now be possible
to increase FUNC_MAX_ARGS at little cost, but haven't experimented yet.
There are still a lot of vestigial references to FUNC_MAX_ARGS, which
I will clean up in a separate pass. However, getting rid of it
altogether would require changing the FunctionCallInfoData struct,
and I'm not sure I want to buy into that.
access: define new index access method functions 'amgetmulti' that can
fetch multiple TIDs per call. (The functions exist but are totally
untested as yet.) Since I was modifying pg_am anyway, remove the
no-longer-needed 'rel' parameter from amcostestimate functions, and
also remove the vestigial amowner column that was creating useless
work for Alvaro's shared-object-dependencies project.
Initdb forced due to changes in pg_am.
executing a statement that fires triggers. Formerly this time was
included in "Total runtime" but not otherwise accounted for.
As a side benefit, we avoid re-opening relations when firing non-deferred
AFTER triggers, because the trigger code can re-use the main executor's
ResultRelInfo data structure.
currently does. This is now the default Win32 wal sync method because
we perfer o_datasync to fsync.
Also, change Win32 fsync to a new wal sync method called
fsync_writethrough because that is the behavior of _commit, which is
what is used for fsync on Win32.
Backpatch to 8.0.X.
ExclusiveLock rather than AccessExclusiveLock. This will allow concurrent
SELECT queries to proceed on the table. Per discussion with Andrew at
SuperNews.
convention for isnull flags. Also, remove the useless InsertIndexResult
return struct from index AM aminsert calls --- there is no reason for
the caller to know where in the index the tuple was inserted, and we
were wasting a palloc cycle per insert to deliver this uninteresting
value (plus nontrivial complexity in some AMs).
I forced initdb because of the change in the signature of the aminsert
routines, even though nothing really looks at those pg_proc entries...
of tuples when passing data up through multiple plan nodes. A slot can now
hold either a normal "physical" HeapTuple, or a "virtual" tuple consisting
of Datum/isnull arrays. Upper plan levels can usually just copy the Datum
arrays, avoiding heap_formtuple() and possible subsequent nocachegetattr()
calls to extract the data again. This work extends Atsushi Ogawa's earlier
patch, which provided the key idea of adding Datum arrays to TupleTableSlots.
(I believe however that something like this was foreseen way back in Berkeley
days --- see the old comment on ExecProject.) A test case involving many
levels of join of fairly wide tables (about 80 columns altogether) showed
about 3x overall speedup, though simple queries will probably not be
helped very much.
I have also duplicated some code in heaptuple.c in order to provide versions
of heap_formtuple and friends that use "bool" arrays to indicate null
attributes, instead of the old convention of "char" arrays containing either
'n' or ' '. This provides a better match to the convention used by
ExecEvalExpr. While I have not made a concerted effort to get rid of uses
of the old routines, I think they should be deprecated and eventually removed.
whether or not it is a security definer. Changing a function's strictness
is required by SQL2003, and the other capabilities make sense. Also, allow
an optional RESTRICT noise word to be specified, for SQL conformance.
Some trivial regression tests added and the documentation has been
updated.
can tell whether it is being used as an aggregate or not. This allows
such a function to avoid re-pallocing a pass-by-reference transition
value; normally it would be unsafe for a function to scribble on an input,
but in the aggregate case it's safe to reuse the old transition value.
Make int8inc() do this. This gets a useful improvement in the speed of
COUNT(*), at least on narrow tables (it seems to be swamped by I/O when
the table rows are wide). Per a discussion in early December with
Neil Conway. I also fixed int_aggregate.c to check this, thereby
turning it into something approaching a supportable technique instead
of being a crude hack.
Formerly, if such a clause contained no aggregate functions we mistakenly
treated it as equivalent to WHERE. Per spec it must cause the query to
be treated as a grouped query of a single group, the same as appearance
of aggregate functions would do. Also, the HAVING filter must execute
after aggregate function computation even if it itself contains no
aggregate functions.
the freelist, plus per-buffer spinlocks that protect access to individual
shared buffer headers. This requires abandoning a global freelist (since
the freelist is a global contention point), which shoots down ARC and 2Q
as well as plain LRU management. Adopt a clock sweep algorithm instead.
Preliminary results show substantial improvement in multi-backend situations.
adjusting values:
> But to be on the safe side, it would make sense to do something similar
> to the BSD section, and comment about older distributions maybe needing
> to manipulate /proc/kernel/* directly.
Mark Kirkwood
! authentication. Use of this environment variable is not
! recommended for security reasons (some operating systems
! allow non-root users to see process environment variables via
! <application>ps</>); instead consider using the
! <filename>~/.pgpass</> file (see <xref linkend="libpq-pgpass">).
in GetNewTransactionId(). Since the limit value has to be computed
before we run any real transactions, this requires adding code to database
startup to scan pg_database and determine the oldest datfrozenxid.
This can conveniently be combined with the first stage of an attack on
the problem that the 'flat file' copies of pg_shadow and pg_group are
not properly updated during WAL recovery. The code I've added to
startup resides in a new file src/backend/utils/init/flatfiles.c, and
it is responsible for rewriting the flat files as well as initializing
the XID wraparound limit value. This will eventually allow us to get
rid of GetRawDatabaseInfo too, but we'll need an initdb so we can add
a trigger to pg_database.
more variables can be found in the libpq manual section.
Mention .pgpass in the psql manual page section dealing with connection
parameters and point to the libpq section for more details.
Backpatch to 8.0.X.
tests. Contributed by Koju Iijima, review from Neil Conway, Gavin Sherry
and Tom Lane.
Also, fix error in description of WITH CHECK OPTION clause in the CREATE
VIEW reference page: it should be "CASCADED", not "CASCADE".
command. This is useful because we can allow truncation of tables
referenced by foreign keys, so long as the referencing table is
truncated in the same command.
Alvaro Herrera
to avoid problems when a cursor depends on objects created or changed in
the same subtransaction. We'd like to do better someday, but this seems
the only workable answer for 8.0.1.
discussion on pgsql-hackers-win32 list. Documentation still needs to
be tweaked --- I'm not sure how to refer to the APPDATA folder in
user documentation.
Also performed an initial run through of upgrading our Copyright date to
extend to 2005 ... first run here was very simple ... change everything
where: grep 1996-2004 && the word 'Copyright' ... scanned through the
generated list with 'less' first, and after, to make sure that I only
picked up the right entries ...
that is, files are sought in the same directory as the referencing file.
Also allow absolute paths in @file constructs. Improve documentation
to actually say what is allowed in an included file.
numbering is different than TO_CHAR's ditto. EXTRACT starts at 0==Sunday
while TO_CHAR starts at 1==Sunday.
A suggestion for two documentation notes is attached as a patch to
current CVS HEAD.
Troels Arvin
several reports of users being confused when they attempt to use ELSEIF
and run into trouble due to PL/PgSQL's lax parser. The parser will be
improved for 8.1, but we can fix most of the problem by allowing ELSEIF
for now.
reasons I outlined in pghackers a few days ago.
Also, undo someone's overly optimistic decision to reduce tuple state
checks from if (...) elog() to Asserts. If I trusted this code more,
I might think it was a good idea to disable these checks in production
installations. But I don't.
a relation's number of blocks, rather than the possibly-obsolete value
in pg_class.relpages. Scale the value in pg_class.reltuples correspondingly
to arrive at a hopefully more accurate number of rows. When pg_class
contains 0/0, estimate a tuple width from the column datatypes and divide
that into current file size to estimate number of rows. This improved
methodology allows us to jettison the ancient hacks that put bogus default
values into pg_class when a table is first created. Also, per a suggestion
from Simon, make VACUUM (but not VACUUM FULL or ANALYZE) adjust the value
it puts into pg_class.reltuples to try to represent the mean tuple density
instead of the minimal density that actually prevails just after VACUUM.
These changes alter the plans selected for certain regression tests, so
update the expected files accordingly. (I removed join_1.out because
it's not clear if it still applies; we can add back any variant versions
as they are shown to be needed.)
operations are now run as subtransactions, so that errors in them
can be reported as ordinary Perl or Tcl errors and caught by the
normal error handling convention of those languages. Also do some
minor code cleanup in pltcl.c: extract a large chunk of duplicated
code in pltcl_SPI_execute and pltcl_SPI_execute_plan into a shared
subroutine.
plain SUSET instead. Also delay processing of options received in
client connection request until after we know if the user is a superuser,
so that SUSET values can be set that way by legitimate superusers.
Per recent discussion.