number of active subtransaction XIDs in each backend's PGPROC entry,
and use this to avoid expensive probes into pg_subtrans during
TransactionIdIsInProgress. Extend EOXactCallback API to allow add-on
modules to get control at subxact start/end. (This is deliberately
not compatible with the former API, since any uses of that API probably
need manual review anyway.) Add basic reference documentation for
SAVEPOINT and related commands. Minor other cleanups to check off some
of the open issues for subtransactions.
Alvaro Herrera and Tom Lane.
There are various things left to do: contrib dbsize and oid2name modules
need work, and so does the documentation. Also someone should think about
COMMENT ON TABLESPACE and maybe RENAME TABLESPACE. Also initlocation is
dead, it just doesn't know it yet.
Gavin Sherry and Tom Lane.
than being random pieces of other files. Give bgwriter responsibility
for all checkpoint activity (other than a post-recovery checkpoint);
so this child process absorbs the functionality of the former transient
checkpoint and shutdown subprocesses. While at it, create an actual
include file for postmaster.c, which for some reason never had its own
file before.
about a third, make it work on non-Windows platforms again. (But perhaps
I broke the WIN32 code, since I have no way to test that.) Fold all the
paths that fork postmaster child processes to go through the single
routine SubPostmasterMain, which takes care of resurrecting the state that
would normally be inherited from the postmaster (including GUC variables).
Clean up some places where there's no particularly good reason for the
EXEC and non-EXEC cases to work differently. Take care of one or two
FIXMEs that remained in the code.
all the code that looks for other binaries. I move FindExec into
port/exec.c (and renamed it to find_my_binary()). I also added
find_other_binary that looks for another binary in the same directory as
the calling program, and checks the version string.
The only behavior change was that initdb and pg_dump would look in the
hard-coded bindir directory if it can't find the requested binary in the
same directory as the caller. The new code throws an error. The old
behavior seemed too error prone for version mismatches.
It works on the principle of turning sockets into non-blocking, and then
emulate blocking behaviour on top of that, while allowing signals to
run. Signals are now implemented using an event instead of APCs, thus
getting rid of the issue of APCs not being compatible with "old style"
sockets functions.
It also moves the win32 specific code away from pqsignal.h/c into
port/win32, and also removes the "thread style workaround" of the APC
issue previously in place.
In order to make things work, a few things are also changed in pgstat.c:
1) There is now a separate pipe to the collector and the bufferer. This
is required because the pipe will otherwise only be signalled in one of
the processes when the postmaster goes down. The MS winsock code for
select() must have some kind of workaround for this behaviour, but I
have found no stable way of doing that. You really are not supposed to
use the same socket from more than one process (unless you use
WSADuplicateSocket(), in which case the docs specifically say that only
one will be flagged).
2) The check for "postmaster death" is moved into a separate select()
call after the main loop. The previous behaviour select():ed on the
postmaster pipe, while later explicitly saying "we do NOT check for
postmaster exit inside the loop".
The issue was that the code relies on the same select() call seeing both
the postmaster pipe *and* the pgstat pipe go away. This does not always
happen, and it appears that useing WSAEventSelect() makes it even more
common that it does not.
Since it's only called when the process exits, I don't think using a
separate select() call will have any significant impact on how the stats
collector works.
Magnus Hagander
is measured in kilobytes and checked against actual physical execution
stack depth, as per my proposal of 30-Dec. This gives us a fairly
bulletproof defense against crashing due to runaway recursive functions.
listen_addresses parameter, as per recent discussion. The default behavior
is now to listen on localhost, which eliminates the need for the -i
postmaster switch in many scenarios.
Andrew Dunstan
subroutine in src/port/pgsleep.c. Remove platform dependencies from
miscadmin.h and put them in port.h where they belong. Extend recent
vacuum cost-based-delay patch to apply to VACUUM FULL, ANALYZE, and
non-btree index vacuuming.
By the way, where is the documentation for the cost-based-delay patch?
Natoli and Bruce Momjian (and some cosmetic fixes from Neil Conway).
Changes:
- remove duplicate signal definitions from pqsignal.h
- replace pqkill() with kill() and redefine kill() in Win32
- use ereport() in place of fprintf() in some error handling in
pqsignal.c
- export pg_queue_signal() and make use of it where necessary
- add a console control handler for Ctrl-C and similar handling
on Win32
- do WaitForSingleObjectEx() in CHECK_FOR_INTERRUPTS() on Win32;
query cancelling should now work on Win32
- various other fixes and cleanups
Make btree index creation and initial validation of foreign-key constraints
use maintenance_work_mem rather than work_mem as their memory limit.
Add some code to guc.c to allow these variables to be referenced by their
old names in SHOW and SET commands, for backwards compatibility.
PostmasterPid variable, which gets set (early) in PostmasterMain
getppid would not be the postmaster?
[fork/exec] Implements processCancelRequest by keeping an array of
pid/cancel_key structs in shared mem
[fork/exec] Moves AttachSharedMemoryAndSemaphores call for backends into
SubPostmasterMain
[win32] Implements reaper/waitpid by keeping an arrays of children
pids,handles in postmaster local mem
- this item is largely untested, for reasons which should be
obvious, but appears sound
[win32/all] Added extern for pgpipe in Win32 case, and changed the second
pipe call (which seems to have been missed earlier) to pgpipe
[win32] #define'd ftruncate to chsize in the Win32 case
[win32] PG_USLEEP for Win32 has a misplaced paren. Fixed.
[win32] DLLIMPORT handling for MingW case
Claudio Natoli
BackendFork/SSDataBase/pgstat) startup, to allow fork/exec calls to
closely mimic (the soon to be provided) Win32 CreateProcess equivalent
calls.
Claudio Natoli
> Attached is a patch that addressed all the discussed issues
> that did not break backward compatability, including the
> ability to output ISO-8601 compliant intervals by setting
> datestyle to iso8601basic.
a) ones that are 100% backward (such as the comment about
outputting this format)
and
b) ones that aren't (such as deprecating the current
postgresql shorthand of
'1Y1M'::interval = 1 year 1 minute
in favor of the ISO-8601
'P1Y1M'::interval = 1 year 1 month.
Attached is a patch that addressed all the discussed issues that
did not break backward compatability, including the ability to
output ISO-8601 compliant intervals by setting datestyle to
iso8601basic.
Interval values can now be written as ISO 8601 time intervals, using
the "Format with time-unit designators". This format always starts with
the character 'P', followed by a string of values followed
by single character time-unit designators. A 'T' separates the date and
time parts of the interval.
Ron Mayer
now able to cope with assigning new relfilenode values to nailed-in-cache
indexes, so they can be reindexed using the fully crash-safe method. This
leaves only shared system indexes as special cases. Remove the 'index
deactivation' code, since it provides no useful protection in the shared-
index case. Require reindexing of shared indexes to be done in standalone
mode, but remove other restrictions on REINDEX. -P (IgnoreSystemIndexes)
now prevents using indexes for lookups, but does not disable index updates.
It is therefore safe to allow from PGOPTIONS. Upshot: reindexing system catalogs
can be done without a standalone backend for all cases except
shared catalogs.
max_connections at initdb time. Get rid of DEF_NBUFFERS and DEF_MAXBACKENDS
macros, which aren't doing anything useful anymore, and put more likely
defaults into postgresql.conf.sample.
heuristic determination of day vs month in date/time input. Add the
ability to specify that input is interpreted as yy-mm-dd order (which
formerly worked, but only for yy greater than 31). DateStyle's input
component now has the preferred spellings DMY, MDY, or YMD; the older
keywords European and US are now aliases for the first two of these.
Per recent discussions on pgsql-general.
for the sign of timezone offsets, ie, positive is east from UTC. These
were previously out of step with other operations that accept or show
timezones, such as I/O of timestamptz values.
of order; the 'server log' output is actually client output in these
scenarios and we ought to treat elevels the same way as in the client
case. This allows initdb to not send backend stderr to /dev/null anymore,
which makes it much more likely that people will notice problems during
initdb.
> weird behavior across fork boundaries; (b) the additional memory space
> that has to be duplicated into child processes will cost something per
> child launch, even if the child never uses it. But these are only
> arguments that it might not *always* be a prudent thing to do, not that
> we shouldn't give the DBA the tool to do it if he wants. So fire away.
Here is a patch for the above, including a documentation update. It
creates a new GUC variable "preload_libraries", that accepts a list in
the form:
preload_libraries = '$libdir/mylib1:initfunc,$libdir/mylib2'
If ":initfunc" is omitted or not found, no initialization function is
executed, but the library is still preloaded. If "$libdir/mylib" isn't
found, the postmaster refuses to start.
In my testing with PL/R, it reduces the first call to a PL/R function
(after connecting) from almost 2 seconds, down to about 8 ms.
Joe Conway
Bruce Momjian
Tom Lane
Neil Conway
Jan Wieck
PostgreSQL Daemon
Peter Eisentraut