While keeping API the same, this commit provides a way for block-level table
AMs to re-use existing acquire_sample_rows() by providing custom callbacks
for getting the next block and the next tuple.
Reported-by: Andres Freund
Discussion: https://postgr.es/m/20240407214001.jgpg5q3yv33ve6y3%40awork3.anarazel.de
Reviewed-by: Pavel Borisov
Let table AM define custom reloptions for its tables. This allows specifying
AM-specific parameters by the WITH clause when creating a table.
The reloptions, which could be used outside of table AM, are now extracted
into the CommonRdOptions data structure. These options could be by decision
of table AM directly specified by a user or calculated in some way.
The new test module test_tam_options evaluates the ability to set up custom
reloptions and calculate fields of CommonRdOptions on their base.
The code may use some parts from prior work by Hao Wu.
Discussion: https://postgr.es/m/CAPpHfdurb9ycV8udYqM%3Do0sPS66PJ4RCBM1g-bBpvzUfogY0EA%40mail.gmail.com
Discussion: https://postgr.es/m/AMUA1wBBBxfc3tKRLLdU64rb.1.1683276279979.Hmail.wuhao%40hashdata.cn
Reviewed-by: Reviewed-by: Pavel Borisov, Matthias van de Meent, Jess Davis
The ANALYZE command prefetches and reads sample blocks chosen by a
BlockSampler algorithm. Instead of calling [Prefetch|Read]Buffer() for
each block, ANALYZE now uses the streaming API introduced in b5a9b18cd0.
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Jakub Wartak <jakub.wartak@enterprisedb.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/flat/CAN55FZ0UhXqk9v3y-zW_fp4-WCp43V8y0A72xPmLkOM%2B6M%2BmJg%40mail.gmail.com
Commit 7c70996ebf introduced an optimization to allow bitmap
scans to operate like index-only scans by not fetching a block from the
heap if none of the underlying data is needed and the block is marked
all visible in the visibility map.
With the introduction of table AMs, a FIXME was added to this code
indicating that the skip_fetch logic should be pushed into the table
AM-specific code, as not all table AMs may use a visibility map in the
same way.
This commit resolves this FIXME for the current block. The layering
violation is still present in BitmapHeapScans's prefetching code, which
uses the visibility map to decide whether or not to prefetch a block.
However, this can be addressed independently.
Author: Melanie Plageman
Reviewed-by: Andres Freund, Heikki Linnakangas, Tomas Vondra, Mark Dilger
Discussion: https://postgr.es/m/CAAKRu_ZwCwWFeL_H3ia26bP2e7HiKLWt0ZmGXPVwPO6uXq0vaA%40mail.gmail.com
To allow the use of the read stream API added in b5a9b18cd for
sequential scans on heap tables, here we make some adjustments to make
that change less invasive and perhaps make the code easier to follow in
the process.
Here heapgetpage() gets broken into two functions:
1) The part which reads the block has now been moved into a function
named heapfetchbuf().
2) The part which performed pruning and populated the scan's
rs_vistuples[] array is now moved into a new function named
heap_prepare_pagescan().
The functionality provided by heap_prepare_pagescan() was only ever
required by SO_ALLOW_PAGEMODE scans, so the branching that was
previously done in heapgetpage() is no longer needed as we simply just
don't call heap_prepare_pagescan() from heapgettup() in the refactored
code.
Author: Melanie Plageman
Discussion: https://postgr.es/m/CAAKRu_YtXJiYKQvb5JsA2SkwrsizYLugs4sSOZh3EAjKUg=gEQ@mail.gmail.com
Execute both freezing and pruning of tuples in the same
heap_page_prune() function, now called heap_page_prune_and_freeze(),
and emit a single WAL record containing all changes. That reduces the
overall amount of WAL generated.
This moves the freezing logic from vacuumlazy.c to the
heap_page_prune_and_freeze() function. The main difference in the
coding is that in vacuumlazy.c, we looked at the tuples after the
pruning had already happened, but in heap_page_prune_and_freeze() we
operate on the tuples before pruning. The heap_prepare_freeze_tuple()
function is now invoked after we have determined that a tuple is not
going to be pruned away.
VACUUM no longer needs to loop through the items on the page after
pruning. heap_page_prune_and_freeze() does all the work. It now
returns the list of dead offsets, including existing LP_DEAD items, to
the caller. Similarly it's now responsible for tracking 'all_visible',
'all_frozen', and 'hastup' on the caller's behalf.
Author: Melanie Plageman <melanieplageman@gmail.com>
Discussion: https://www.postgresql.org/message-id/20240330055710.kqg6ii2cdojsxgje@liskov
Previously, the executor did index insert unconditionally after calling
table AM interface methods tuple_insert() and multi_insert(). This commit
introduces the new parameter insert_indexes for these two methods. Setting
'*insert_indexes' to true saves the current logic. Setting it to false
indicates that table AM cares about index inserts itself and doesn't want the
caller to do that.
Discussion: https://postgr.es/m/CAPpHfdurb9ycV8udYqM%3Do0sPS66PJ4RCBM1g-bBpvzUfogY0EA%40mail.gmail.com
Reviewed-by: Pavel Borisov, Matthias van de Meent, Mark Dilger
Currently, there is just one algorithm for sampling tuples from a table written
in acquire_sample_rows(). Custom table AM can just redefine the way to get the
next block/tuple by implementing scan_analyze_next_block() and
scan_analyze_next_tuple() API functions.
This approach doesn't seem general enough. For instance, it's unclear how to
sample this way index-organized tables. This commit allows table AM to
encapsulate the whole sampling algorithm (currently implemented in
acquire_sample_rows()) into the relation_analyze() API function.
Discussion: https://postgr.es/m/CAPpHfdurb9ycV8udYqM%3Do0sPS66PJ4RCBM1g-bBpvzUfogY0EA%40mail.gmail.com
Reviewed-by: Pavel Borisov, Matthias van de Meent
Currently, in read committed transaction isolation mode (default), we have the
following sequence of actions when tuple_update()/tuple_delete() finds
the tuple updated by the concurrent transaction.
1. Attempt to update/delete tuple with tuple_update()/tuple_delete(), which
returns TM_Updated.
2. Lock tuple with tuple_lock().
3. Re-evaluate plan qual (recheck if we still need to update/delete and
calculate the new tuple for update).
4. Second attempt to update/delete tuple with tuple_update()/tuple_delete().
This attempt should be successful, since the tuple was previously locked.
This commit eliminates step 2 by taking the lock during the first
tuple_update()/tuple_delete() call. The heap table access method saves some
effort by checking the updated tuple once instead of twice. Future
undo-based table access methods, which will start from the latest row version,
can immediately place a lock there.
Also, this commit makes tuple_update()/tuple_delete() optionally save the old
tuple into the dedicated slot. That saves efforts on re-fetching tuples in
certain cases.
The code in nodeModifyTable.c is simplified by removing the nested switch/case.
Discussion: https://postgr.es/m/CAPpHfdua-YFw3XTprfutzGp28xXLigFtzNbuFY8yPhqeq6X5kg%40mail.gmail.com
Reviewed-by: Aleksander Alekseev, Pavel Borisov, Vignesh C, Mason Sharp
Reviewed-by: Andres Freund, Chris Travers
This allows table AM to return a native tuple slot even if
VirtualTupleTableSlot is given as an input. Native tuple slots have knowledge
about system attributes, which could be accessed in the future.
table_multi_insert() method already can modify the input 'slots' array.
Discussion: https://postgr.es/m/CAPpHfdurb9ycV8udYqM%3Do0sPS66PJ4RCBM1g-bBpvzUfogY0EA%40mail.gmail.com
Reviewed-by: Matthias van de Meent, Mark Dilger, Pavel Borisov
Reviewed-by: Nikita Malakhov, Japin Li
The new table AM method free_rd_amcache is responsible for freeing all the
memory related to rd_amcache and setting free_rd_amcache to NULL. If the new
method is not specified, we still assume rd_amcache to be a single chunk of
memory, which could be just pfree'd.
Discussion: https://postgr.es/m/CAPpHfdurb9ycV8udYqM%3Do0sPS66PJ4RCBM1g-bBpvzUfogY0EA%40mail.gmail.com
Reviewed-by: Matthias van de Meent, Mark Dilger, Pavel Borisov
Reviewed-by: Nikita Malakhov, Japin Li
This became safe after commit 4b4798e138. The smgrcreate() call will
now register the segment for syncing at the next checkpoint, so we
don't need to sync it here. If a checkpoint happens before the
creation is WAL-logged, the records will be replayed when starting
recovery from the checkpoint. If a checkpoint happens after the WAL
logging, the checkpoint will fsync() it.
In the passing, clarify a comment in smgrDoPendingSyncs().
Discussion: https://www.postgresql.org/message-id/6e5bbc08-cdfc-b2b3-9e23-1a914b9850a9%40iki.fi
Reviewed-by: Robert Haas
When performing a bitmap heap scan, we don't want to miss concurrent
writes that occurred after we observed the heap's rs_nblocks, but before
we took predicate locks on index pages. Therefore, we can't skip
fetching any heap tuples that are referenced by the index, because we
need to test them all with CheckForSerializableConflictOut(). The
old optimization that would ignore any references to blocks >=
rs_nblocks gets in the way of that requirement, because it means that
concurrent writes in that window are ignored.
Removing that optimization shouldn't affect correctness at any isolation
level, because any new tuples shouldn't be visible to an MVCC snapshot.
There also shouldn't be any error-causing references to heap blocks past
the end, because we should have held at least an AccessShareLock on the
table before the index scan. It can't get smaller while our transaction
is running. For now, though, we'll keep the optimization at lower
levels to avoid making unnecessary changes in a bug fix.
Back-patch to all supported releases. In release 11, the code is in a
different place but not fundamentally different. Fixes one aspect of
bug #17949.
Reported-by: Artem Anisimov <artem.anisimov.255@gmail.com>
Reviewed-by: Dmitry Dolgov <9erthalion6@gmail.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/17949-a0f17035294a55e2%40postgresql.org
Split nbtree's _bt_getbuf function is two: code that read locks or write
locks existing pages remains in _bt_getbuf, while code that deals with
allocating new pages is moved to a new, dedicated function called
_bt_allocbuf. This simplifies most _bt_getbuf callers, since it is no
longer necessary for them to pass a heaprel argument. Many of the
changes to nbtree from commit 61b313e4 can be reverted. This minimizes
the divergence between HEAD/PostgreSQL 16 and earlier release branches.
_bt_allocbuf replaces the previous nbtree idiom of passing P_NEW to
_bt_getbuf. There are only 3 affected call sites, all of which continue
to pass a heaprel for recovery conflict purposes. Note that nbtree's
use of P_NEW was superficial; nbtree never actually relied on the P_NEW
code paths in bufmgr.c, so this change is strictly mechanical.
GiST already took the same approach; it has a dedicated function for
allocating new pages called gistNewBuffer(). That factor allowed commit
61b313e4 to make much more targeted changes to GiST.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/CAH2-Wz=8Z9qY58bjm_7TAHgtW6RzZ5Ke62q5emdCEy9BAzwhmg@mail.gmail.com
Run pgindent, pgperltidy, and reformat-dat-files.
This set of diffs is a bit larger than typical. We've updated to
pg_bsd_indent 2.1.2, which properly indents variable declarations that
have multi-line initialization expressions (the continuation lines are
now indented one tab stop). We've also updated to perltidy version
20230309 and changed some of its settings, which reduces its desire to
add whitespace to lines to make assignments etc. line up. Going
forward, that should make for fewer random-seeming changes to existing
code.
Discussion: https://postgr.es/m/20230428092545.qfb3y5wcu4cm75ur@alvherre.pgsql
This is done in preparation for logical decoding on standby, which needs to
include whether visibility affecting WAL records are about a (user) catalog
table. Which is only known for the table, not the indexes.
It's also nice to be able to pass the heap relation to GlobalVisTestFor() in
vacuumRedirectAndPlaceholder().
Author: "Drouvot, Bertrand" <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/21b700c3-eecf-2e05-a699-f8c78dd31ec7@gmail.com
Currently, in read committed transaction isolation mode (default), we have the
following sequence of actions when tuple_update()/tuple_delete() finds
the tuple updated by concurrent transaction.
1. Attempt to update/delete tuple with tuple_update()/tuple_delete(), which
returns TM_Updated.
2. Lock tuple with tuple_lock().
3. Re-evaluate plan qual (recheck if we still need to update/delete and
calculate the new tuple for update).
4. Second attempt to update/delete tuple with tuple_update()/tuple_delete().
This attempt should be successful, since the tuple was previously locked.
This patch eliminates step 2 by taking the lock during first
tuple_update()/tuple_delete() call. Heap table access method saves some
efforts by checking the updated tuple once instead of twice. Future
undo-based table access methods, which will start from the latest row version,
can immediately place a lock there.
The code in nodeModifyTable.c is simplified by removing the nested switch/case.
Discussion: https://postgr.es/m/CAPpHfdua-YFw3XTprfutzGp28xXLigFtzNbuFY8yPhqeq6X5kg%40mail.gmail.com
Reviewed-by: Aleksander Alekseev, Pavel Borisov, Vignesh C, Mason Sharp
Reviewed-by: Andres Freund, Chris Travers
When determining whether an index update may be skipped by using HOT, we
can ignore attributes indexed by block summarizing indexes without
references to individual tuples that need to be cleaned up.
A new type TU_UpdateIndexes provides a signal to the executor to
determine which indexes to update - no indexes, all indexes, or only the
summarizing indexes.
This also removes rd_indexattr list, and replaces it with rd_attrsvalid
flag. The list was not used anywhere, and a simple flag is sufficient.
This was originally committed as 5753d4ee32, but then got reverted by
e3fcca0d0d because of correctness issues.
Original patch by Josef Simanek, various fixes and improvements by Tomas
Vondra and me.
Authors: Matthias van de Meent, Josef Simanek, Tomas Vondra
Reviewed-by: Tomas Vondra, Alvaro Herrera
Discussion: https://postgr.es/m/05ebcb44-f383-86e3-4f31-0a97a55634cf@enterprisedb.com
Discussion: https://postgr.es/m/CAFp7QwpMRGcDAQumN7onN9HjrJ3u4X3ZRXdGFT0K5G2JWvnbWg%40mail.gmail.com
Here we add a new 'copy' parameter to tuplesort_getdatum so that we can
instruct the function not to datumCopy() byref Datums before returning.
Similar to 91e9e89dc, this can provide significant performance
improvements in nodeSort when sorting by a single byref column and the
sort's targetlist contains only that column.
This allows us to re-enable Datum sorts for byref types which was disabled
in 3a5817695 due to a reported memory leak.
Additionally, here we slightly optimize DISTINCT aggregates so that we no
longer perform any datumCopy() when we find the current value not to be
distinct from the previous value. Previously the code would always take a
copy of the most recent Datum and pfree the previous value, even when the
values were the same. Testing shows a small but noticeable performance
increase when aggregate transitions are skipped due to the current
transition value being the same as the prior one.
Author: David Rowley
Discussion: https://postgr.es/m/CAApHDvqS6wC5U==k9Hd26E4EQXH3QR67-T4=Q1rQ36NGvjfVSg@mail.gmail.com
Discussion: https://postgr.es/m/CAApHDvqHonfe9G1cVaKeHbDx70R_zCrM3qP2AGXpGrieSKGnhA@mail.gmail.com
We have been using the term RelFileNode to refer to either (1) the
integer that is used to name the sequence of files for a certain relation
within the directory set aside for that tablespace/database combination;
or (2) that value plus the OIDs of the tablespace and database; or
occasionally (3) the whole series of files created for a relation
based on those values. Using the same name for more than one thing is
confusing.
Replace RelFileNode with RelFileNumber when we're talking about just the
single number, i.e. (1) from above, and with RelFileLocator when we're
talking about all the things that are needed to locate a relation's files
on disk, i.e. (2) from above. In the places where we refer to (3) as
a relfilenode, instead refer to "relation storage".
Since there is a ton of SQL code in the world that knows about
pg_class.relfilenode, don't change the name of that column, or of other
SQL-facing things that derive their name from it.
On the other hand, do adjust closely-related internal terminology. For
example, the structure member names dbNode and spcNode appear to be
derived from the fact that the structure itself was called RelFileNode,
so change those to dbOid and spcOid. Likewise, various variables with
names like rnode and relnode get renamed appropriately, according to
how they're being used in context.
Hopefully, this is clearer than before. It is also preparation for
future patches that intend to widen the relfilenumber fields from its
current width of 32 bits. Variables that store a relfilenumber are now
declared as type RelFileNumber rather than type Oid; right now, these
are the same, but that can now more easily be changed.
Dilip Kumar, per an idea from me. Reviewed also by Andres Freund.
I fixed some whitespace issues, changed a couple of words in a
comment, and made one other minor correction.
Discussion: http://postgr.es/m/CA+TgmoamOtXbVAQf9hWFzonUo6bhhjS6toZQd7HZ-pmojtAmag@mail.gmail.com
Discussion: http://postgr.es/m/CA+Tgmobp7+7kmi4gkq7Y+4AM9fTvL+O1oQ4-5gFTT+6Ng-dQ=g@mail.gmail.com
Discussion: http://postgr.es/m/CAFiTN-vTe79M8uDH1yprOU64MNFE+R3ODRuA+JWf27JbhY4hJw@mail.gmail.com
heap_fetch() used to have a "keep_buf" parameter that told it to return
ownership of the buffer pin to the caller after finding that the
requested tuple TID exists but is invisible to the specified snapshot.
This was thoughtlessly removed in commit 5db6df0c0, which broke
heapam_tuple_lock() (formerly EvalPlanQualFetch) because that function
needs to do more accesses to the tuple even if it's invisible. The net
effect is that we would continue to touch the page for a microsecond or
two after releasing pin on the buffer. Usually no harm would result;
but if a different session decided to defragment the page concurrently,
we could see garbage data and mistakenly conclude that there's no newer
tuple version to chain up to. (It's hard to say whether this has
happened in the field. The bug was actually found thanks to a later
change that allowed valgrind to detect accesses to non-pinned buffers.)
The most reasonable way to fix this is to reintroduce keep_buf,
although I made it behave slightly differently: buffer ownership
is passed back only if there is a valid tuple at the requested TID.
In HEAD, we can just add the parameter back to heap_fetch().
To avoid an API break in the back branches, introduce an additional
function heap_fetch_extended() in those branches.
In HEAD there is an additional, less obvious API change: tuple->t_data
will be set to NULL in all cases where buffer ownership is not returned,
in particular when the tuple exists but fails the time qual (and
!keep_buf). This is to defend against any other callers attempting to
access non-pinned buffers. We concluded that making that change in back
branches would be more likely to introduce problems than cure any.
In passing, remove a comment about heap_fetch that was obsoleted by
9a8ee1dc6.
Per bug #17462 from Daniil Anisimov. Back-patch to v12 where the bug
was introduced.
Discussion: https://postgr.es/m/17462-9c98a0f00df9bd36@postgresql.org
Soon the stats collector will be no more, with statistics instead getting
stored in shared memory. There are a lot of references to the stats collector
in comments. This commit replaces most of these references with "cumulative
statistics system", with the remaining ones getting replaced as part of
subsequent commits.
This is done separately from the - quite large - shared memory statistics
patch to make review easier.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
Discussion: https://postgr.es/m/20220308205351.2xcn6k4x5yivcxyd@alap3.anarazel.de
This replaces the bool flag for randomAccess. An upcoming patch requires
adding another option, so instead of breaking the API for that, then
breaking it again one day if we add more options, let's just break it
once. Any boolean options we add in the future will just make use of an
unused bit in the flags.
Any extensions making use of tuplesorts will need to update their code
to pass TUPLESORT_RANDOMACCESS instead of true for randomAccess.
TUPLESORT_NONE can be used for a set of empty options.
Author: David Rowley
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/CAApHDvoH4ASzsAOyHcxkuY01Qf%2B%2B8JJ0paw%2B03dk%2BW25tQEcNQ%40mail.gmail.com
Because this strategy logs changes on a block-by-block basis, it
avoids the need to checkpoint before and after the operation.
However, because it logs each changed block individually, it might
generate a lot of extra write-ahead logging if the template database
is large. Therefore, the older strategy remains available via a new
STRATEGY parameter to CREATE DATABASE, and a corresponding --strategy
option to createdb.
Somewhat controversially, this patch assembles the list of relations
to be copied to the new database by reading the pg_class relation of
the template database. Cross-database access like this isn't normally
possible, but it can be made to work here because there can't be any
connections to the database being copied, nor can it contain any
in-doubt transactions. Even so, we have to use lower-level interfaces
than normal, since the table scan and relcache interfaces will not
work for a database to which we're not connected. The advantage of
this approach is that we do not need to rely on the filesystem to
determine what ought to be copied, but instead on PostgreSQL's own
knowledge of the database structure. This avoids, for example,
copying stray files that happen to be located in the source database
directory.
Dilip Kumar, with a fairly large number of cosmetic changes by me.
Reviewed and tested by Ashutosh Sharma, Andres Freund, John Naylor,
Greg Nancarrow, Neha Sharma. Additional feedback from Bruce Momjian,
Heikki Linnakangas, Julien Rouhaud, Adam Brusselback, Kyotaro
Horiguchi, Tomas Vondra, Andrew Dunstan, Álvaro Herrera, and others.
Discussion: http://postgr.es/m/CA+TgmoYtcdxBjLh31DLxUXHxFVMPGzrU5_T=CYCvRyFHywSBUQ@mail.gmail.com
Most data-corruption reports mention the location of the problem, but
this one failed to. Add it.
Backpatch all the way back. In 12 and older, also assign the
ERRCODE_DATA_CORRUPTED error code as was done in commit fd6ec93bf8 for
13 and later.
Discussion: https://postgr.es/m/202108191637.oqyzrdtnheir@alvherre.pgsql
The idea behind this patch is to design out bugs like the one fixed
by commit 9d523119f. Previously, once one did RelationOpenSmgr(rel),
it was considered okay to access rel->rd_smgr directly for some
not-very-clear interval. But since that pointer will be cleared by
relcache flushes, we had bugs arising from overreliance on a previous
RelationOpenSmgr call still being effective.
Now, very little code except that in rel.h and relcache.c should ever
touch the rd_smgr field directly. The normal coding rule is to use
RelationGetSmgr(rel) and not expect the result to be valid for longer
than one smgr function call. There are a couple of places where using
the function every single time seemed like overkill, but they are now
annotated with large warning comments.
Amul Sul, after an idea of mine.
Discussion: https://postgr.es/m/CANiYTQsU7yMFpQYnv=BrcRVqK_3U3mtAzAsJCaqtzsDHfsUbdQ@mail.gmail.com
The extra checks added by the recompression of toast data introduced in
bbe0a81 is proving to have a performance impact on VACUUM or CLUSTER
even if no recompression is done. This is more noticeable with more
toastable columns that contain non-NULL values.
Improvements could be done to make those extra checks less expensive,
but that's not material for 14 at this stage, and we are not sure either
if the code path of VACUUM FULL/CLUSTER is adapted for this job.
Per discussion with several people, including Andres Freund, Robert
Haas, Álvaro Herrera, Tom Lane and myself.
Discussion: https://postgr.es/m/20210527003144.xxqppojoiwurc2iz@alap3.anarazel.de
Redefine '\0' (InvalidCompressionMethod) as meaning "if we need to
compress, use the current setting of default_toast_compression".
This allows '\0' to be a suitable default choice regardless of
datatype, greatly simplifying code paths that initialize tupledescs
and the like. It seems like a more user-friendly approach as well,
because now the default compression choice doesn't migrate into table
definitions, meaning that changing default_toast_compression is
usually sufficient to flip an installation's behavior; one needn't
tediously issue per-column ALTER SET COMPRESSION commands.
Along the way, fix a few minor bugs and documentation issues
with the per-column-compression feature. Adopt more robust
APIs for SetIndexStorageProperties and GetAttributeCompression.
Bump catversion because typical contents of attcompression will now
be different. We could get away without doing that, but it seems
better to ensure v14 installations all agree on this. (We already
forced initdb for beta2, anyway.)
Discussion: https://postgr.es/m/626613.1621787110@sss.pgh.pa.us
VACUUM FULL and CLUSTER can be used to enforce the use of the existing
compression method of a toastable column if a value currently stored is
compressed with a method that does not match the column's defined
method. The code in charge of decompressing and recompressing toast
values at rewrite left around the detoasted values, causing an
accumulation of memory allocated in TopTransactionContext.
When processing large relations, this could cause the system to run out
of memory. The detoasted values are not needed once their tuple is
rewritten, and this commit ensures that the necessary cleanup happens.
Issue introduced by bbe0a81d. The comments of the area are reordered a
bit while on it.
Reported-by: Andres Freund
Analyzed-by: Andres Freund
Author: Michael Paquier
Reviewed-by: Dilip Kumar
Discussion: https://postgr.es/m/20210521211929.pcehg6f23icwstdb@alap3.anarazel.de
Also "make reformat-dat-files".
The only change worthy of note is that pgindent messed up the formatting
of launcher.c's struct LogicalRepWorkerId, which led me to notice that
that struct wasn't used at all anymore, so I just took it out.
Previously, to check relation permanence, the Relation's Form_pg_class
structure member relpersistence was compared to the value
RELPERSISTENCE_PERMANENT ("p"). This commit adds the macro
RelationIsPermanent() and is used in appropirate places to simplify the
code. This matches other RelationIs* macros.
This macro will be used in more places in future cluster file encryption
patches.
Discussion: https://postgr.es/m/20210318153134.GH20766@tamriel.snowman.net
There is now a per-column COMPRESSION option which can be set to pglz
(the default, and the only option in up until now) or lz4. Or, if you
like, you can set the new default_toast_compression GUC to lz4, and
then that will be the default for new table columns for which no value
is specified. We don't have lz4 support in the PostgreSQL code, so
to use lz4 compression, PostgreSQL must be built --with-lz4.
In general, TOAST compression means compression of individual column
values, not the whole tuple, and those values can either be compressed
inline within the tuple or compressed and then stored externally in
the TOAST table, so those properties also apply to this feature.
Prior to this commit, a TOAST pointer has two unused bits as part of
the va_extsize field, and a compessed datum has two unused bits as
part of the va_rawsize field. These bits are unused because the length
of a varlena is limited to 1GB; we now use them to indicate the
compression type that was used. This means we only have bit space for
2 more built-in compresison types, but we could work around that
problem, if necessary, by introducing a new vartag_external value for
any further types we end up wanting to add. Hopefully, it won't be
too important to offer a wide selection of algorithms here, since
each one we add not only takes more coding but also adds a build
dependency for every packager. Nevertheless, it seems worth doing
at least this much, because LZ4 gets better compression than PGLZ
with less CPU usage.
It's possible for LZ4-compressed datums to leak into composite type
values stored on disk, just as it is for PGLZ. It's also possible for
LZ4-compressed attributes to be copied into a different table via SQL
commands such as CREATE TABLE AS or INSERT .. SELECT. It would be
expensive to force such values to be decompressed, so PostgreSQL has
never done so. For the same reasons, we also don't force recompression
of already-compressed values even if the target table prefers a
different compression method than was used for the source data. These
architectural decisions are perhaps arguable but revisiting them is
well beyond the scope of what seemed possible to do as part of this
project. However, it's relatively cheap to recompress as part of
VACUUM FULL or CLUSTER, so this commit adjusts those commands to do
so, if the configured compression method of the table happens not to
match what was used for some column value stored therein.
Dilip Kumar. The original patches on which this work was based were
written by Ildus Kurbangaliev, and those were patches were based on
even earlier work by Nikita Glukhov, but the design has since changed
very substantially, since allow a potentially large number of
compression methods that could be added and dropped on a running
system proved too problematic given some of the architectural issues
mentioned above; the choice of which specific compression method to
add first is now different; and a lot of the code has been heavily
refactored. More recently, Justin Przyby helped quite a bit with
testing and reviewing and this version also includes some code
contributions from him. Other design input and review from Tomas
Vondra, Álvaro Herrera, Andres Freund, Oleg Bartunov, Alexander
Korotkov, and me.
Discussion: http://postgr.es/m/20170907194236.4cefce96%40wp.localdomain
Discussion: http://postgr.es/m/CAFiTN-uUpX3ck%3DK0mLEk-G_kUQY%3DSNOTeqdaNRR9FMdQrHKebw%40mail.gmail.com
This adds a new executor node named TID Range Scan. The query planner
will generate paths for TID Range scans when quals are discovered on base
relations which search for ranges on the table's ctid column. These
ranges may be open at either end. For example, WHERE ctid >= '(10,0)';
will return all tuples on page 10 and over.
To support this, two new optional callback functions have been added to
table AM. scan_set_tidrange is used to set the scan range to just the
given range of TIDs. scan_getnextslot_tidrange fetches the next tuple
in the given range.
For AMs were scanning ranges of TIDs would not make sense, these functions
can be set to NULL in the TableAmRoutine. The query planner won't
generate TID Range Scan Paths in that case.
Author: Edmund Horner, David Rowley
Reviewed-by: David Rowley, Tomas Vondra, Tom Lane, Andres Freund, Zhihong Yu
Discussion: https://postgr.es/m/CAMyN-kB-nFTkF=VA_JPwFNo08S0d-Yk0F741S2B7LDmYAi8eyA@mail.gmail.com
Teach nbtree and heapam to cooperate in order to eagerly remove
duplicate tuples representing dead MVCC versions. This is "bottom-up
deletion". Each bottom-up deletion pass is triggered lazily in response
to a flood of versions on an nbtree leaf page. This usually involves a
"logically unchanged index" hint (these are produced by the executor
mechanism added by commit 9dc718bd).
The immediate goal of bottom-up index deletion is to avoid "unnecessary"
page splits caused entirely by version duplicates. It naturally has an
even more useful effect, though: it acts as a backstop against
accumulating an excessive number of index tuple versions for any given
_logical row_. Bottom-up index deletion complements what we might now
call "top-down index deletion": index vacuuming performed by VACUUM.
Bottom-up index deletion responds to the immediate local needs of
queries, while leaving it up to autovacuum to perform infrequent clean
sweeps of the index. The overall effect is to avoid certain
pathological performance issues related to "version churn" from UPDATEs.
The previous tableam interface used by index AMs to perform tuple
deletion (the table_compute_xid_horizon_for_tuples() function) has been
replaced with a new interface that supports certain new requirements.
Many (perhaps all) of the capabilities added to nbtree by this commit
could also be extended to other index AMs. That is left as work for a
later commit.
Extend deletion of LP_DEAD-marked index tuples in nbtree by adding logic
to consider extra index tuples (that are not LP_DEAD-marked) for
deletion in passing. This increases the number of index tuples deleted
significantly in many cases. The LP_DEAD deletion process (which is now
called "simple deletion" to clearly distinguish it from bottom-up
deletion) won't usually need to visit any extra table blocks to check
these extra tuples. We have to visit the same table blocks anyway to
generate a latestRemovedXid value (at least in the common case where the
index deletion operation's WAL record needs such a value).
Testing has shown that the "extra tuples" simple deletion enhancement
increases the number of index tuples deleted with almost any workload
that has LP_DEAD bits set in leaf pages. That is, it almost never fails
to delete at least a few extra index tuples. It helps most of all in
cases that happen to naturally have a lot of delete-safe tuples. It's
not uncommon for an individual deletion operation to end up deleting an
order of magnitude more index tuples compared to the old naive approach
(e.g., custom instrumentation of the patch shows that this happens
fairly often when the regression tests are run).
Add a further enhancement that augments simple deletion and bottom-up
deletion in indexes that make use of deduplication: Teach nbtree's
_bt_delitems_delete() function to support granular TID deletion in
posting list tuples. It is now possible to delete individual TIDs from
posting list tuples provided the TIDs have a tableam block number of a
table block that gets visited as part of the deletion process (visiting
the table block can be triggered directly or indirectly). Setting the
LP_DEAD bit of a posting list tuple is still an all-or-nothing thing,
but that matters much less now that deletion only needs to start out
with the right _general_ idea about which index tuples are deletable.
Bump XLOG_PAGE_MAGIC because xl_btree_delete changed.
No bump in BTREE_VERSION, since there are no changes to the on-disk
representation of nbtree indexes. Indexes built on PostgreSQL 12 or
PostgreSQL 13 will automatically benefit from bottom-up index deletion
(i.e. no reindexing required) following a pg_upgrade. The enhancement
to simple deletion is available with all B-Tree indexes following a
pg_upgrade, no matter what PostgreSQL version the user upgrades from.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-By: Victor Yegorov <vyegorov@gmail.com>
Discussion: https://postgr.es/m/CAH2-Wzm+maE3apHB8NOtmM=p-DO65j2V5GzAWCOEEuy3JZgb2g@mail.gmail.com
Alexander Korotkov
Thomas Munro
Tomas Vondra
David Rowley
Heikki Linnakangas
Bruce Momjian
Peter Geoghegan
Tom Lane
Michael Paquier
Andres Freund
Peter Eisentraut
Robert Haas
Alvaro Herrera