Remove the code in plpgsql that suppressed the innermost line of CONTEXT
for messages emitted by RAISE commands. That was never more than a quick
backwards-compatibility hack, and it's pretty silly in cases where the
RAISE is nested in several levels of function. What's more, it violated
our design theory that verbosity of error reports should be controlled
on the client side not the server side.
To alleviate the resulting noise increase, introduce a feature in libpq
and psql whereby the CONTEXT field of messages can be suppressed, either
always or only for non-error messages. Printing CONTEXT for errors only
is now their default behavior.
The actual code changes here are pretty small, but the effects on the
regression test outputs are widespread. I had to edit some of the
alternative expected outputs by hand; hopefully the buildfarm will soon
find anything I fat-fingered.
In passing, fix up (again) the output line counts in psql's various
help displays. Add some commentary about how to verify them.
Pavel Stehule, reviewed by Petr Jelínek, Jeevan Chalke, and others
The setting values of some parameters including max_worker_processes
must be equal to or higher than the values on the master. However,
previously max_worker_processes was not listed as such parameter
in the document. So this commit adds it to that list.
Back-patch to 9.4 where max_worker_processes was added.
The default argument, if given, has to be of exactly the same datatype
as the first argument; but this was not stated in so many words, and
the error message you get about it might not lead your thought in the
right direction. Per bug #13587 from Robert McGehee.
A quick scan says that these are the only two built-in functions with two
anyelement arguments and no other polymorphic arguments. There are plenty
of cases of, eg, anyarray and anyelement, but those seem less likely to
confuse. For instance this doesn't seem terribly hard to figure out:
"function array_remove(integer[], numeric) does not exist". So I've
contented myself with fixing these two cases.
Although commit 79af9a1d2 was initially applied to HEAD only, we later
back-patched the change into all branches (commits 6bbf75192 et al).
So it's not a new behavior in 9.5 and should not be release-noted here.
This behavior wasn't documented, but it should be because it's user-visible
in triggers and other functions executed on the remote server.
Per question from Adam Fuchs.
Back-patch to 9.3 where postgres_fdw was added.
The table-rewriting forms of ALTER TABLE are MVCC-unsafe, in much the same
way as TRUNCATE, because they replace all rows of the table with newly-made
rows with a new xmin. (Ideally, concurrent transactions with old snapshots
would continue to see the old table contents, but the data is not there
anymore --- and if it were there, it would be inconsistent with the table's
updated rowtype, so there would be serious implementation problems to fix.)
This was nowhere documented though, and the problem was only documented for
TRUNCATE in a note in the TRUNCATE reference page. Create a new "Caveats"
section in the MVCC chapter that can be home to this and other limitations
on serializable consistency.
In passing, fix a mistaken statement that VACUUM and CLUSTER would reclaim
space occupied by a dropped column. They don't reconstruct existing tuples
so they couldn't do that.
Back-patch to all supported branches.
Reduce lock levels down to ShareUpdateExclusiveLock for all autovacuum-related
relation options when setting them using ALTER TABLE.
Add infrastructure to allow varying lock levels for relation options in later
patches. Setting multiple options together uses the highest lock level required
for any option. Works for both main and toast tables.
Fabrízio Mello, reviewed by Michael Paquier, mild edit and additional regression
tests from myself
Fix docs build failure introduced by commit 6fcd88511f.
I failed to resist the temptation to rearrange the description of
pg_create_physical_replication_slot(), too.
When creating a physical slot it's often useful to immediately reserve
the current WAL position instead of only doing after the first feedback
message arrives. That e.g. allows slots to guarantee that all the WAL
for a base backup will be available afterwards.
Logical slots already have to reserve WAL during creation, so generalize
that logic into being usable for both physical and logical slots.
Catversion bump because of the new parameter.
Author: Gurjeet Singh
Reviewed-By: Andres Freund
Discussion: CABwTF4Wh_dBCzTU=49pFXR6coR4NW1ynb+vBqT+Po=7fuq5iCw@mail.gmail.com
There's no reason not to expose both restart_lsn and confirmed_flush
since they have rather distinct meanings. The former is the oldest WAL
still required and valid for both physical and logical slots, whereas
the latter is the location up to which a logical slot's consumer has
confirmed receiving data. Most of the time a slot will require older
WAL (i.e. restart_lsn) than the confirmed
position (i.e. confirmed_flush_lsn).
Author: Marko Tiikkaja, editorialized by me
Discussion: 559D110B.1020109@joh.to
Immediately starting to stream after --create-slot is inconvenient in a
number of situations (e.g. when configuring a slot for use in
recovery.conf) and it's easy to just call pg_receivexlog twice in the
rest of the cases.
Author: Michael Paquier
Discussion: CAB7nPqQ9qEtuDiKY3OpNzHcz5iUA+DUX9FcN9K8GUkCZvG7+Ew@mail.gmail.com
Backpatch: 9.5, where the option was introduced
The allowed syntax for OVERLAPS, viz "row OVERLAPS row", is sufficiently
constrained that we don't actually need a precedence declaration for
OVERLAPS; indeed removing this declaration does not change the generated
gram.c file at all. Let's remove it to avoid confusion about whether
OVERLAPS has precedence or not. If we ever generalize what we allow for
OVERLAPS, we might need to put back a precedence declaration for it,
but we might want some other level than what it has today --- and leaving
the declaration there would just risk confusion about whether that would
be an incompatible change.
Likewise, remove OVERLAPS from the documentation's precedence table.
Per discussion with Noah Misch. Back-patch to 9.5 where we hacked up some
nearby precedence decisions.
Amit reviewed the replication origins patch and made some good
points. Address them. This fixes typos in error messages, docs and
comments and adds a missing error check (although in a
should-never-happen scenario).
Discussion: CAA4eK1JqUBVeWWKwUmBPryFaje4190ug0y-OAUHWQ6tD83V4xg@mail.gmail.com
Backpatch: 9.5, where replication origins were introduced.
Make it more clear that bgw_main is usually not what you want. Put the
background worker flags in a variablelist rather than having them as
part of a paragraph. Explain important limits on how bgw_main_arg can
be used.
Craig Ringer, substantially revised by me.
On Windows, use listen_address=127.0.0.1 to allow TCP connections. We were
already using "pg_regress --config-auth" to set up HBA appropriately. The
standard_initdb helper function now sets up the server's
unix_socket_directories or listen_addresses in the config file, so that
they don't need to be specified in the pg_ctl command line anymore. That
way, the pg_ctl invocations in test programs don't need to differ between
Windows and Unix.
Add another helper function to configure the server's pg_hba.conf to allow
replication connections. The configuration is done similarly to "pg_regress
--config-auth": trust on domain sockets on Unix, and SSPI authentication on
Windows.
Replace calls to "cat" and "touch" programs with built-in perl code, as
those programs don't normally exist on Windows.
Add instructions in the docs on how to install IPC::Run on Windows. Adjust
vcregress.pl to not replace PERL5LIB completely in vcregress.pl, because
otherwise cannot install IPC::Run in a non-standard location easily.
Michael Paquier, reviewed by Noah Misch, some additional tweaking by me.
This option specifies a replication slot for WAL streaming (-X stream),
so that there can be continuous replication slot use between WAL
streaming during the base backup and the start of regular streaming
replication.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
CreatePolicy() and AlterPolicy() omit to create a pg_shdepend entry for
each role in the TO clause. Fix this by creating a new shared dependency
type called SHARED_DEPENDENCY_POLICY and assigning it to each role.
Reported by Noah Misch. Patch by me, reviewed by Alvaro Herrera.
Back-patch to 9.5 where RLS was introduced.
Although initdb has long discouraged use of a filesystem mount-point
directory as a PG data directory, this point was covered nowhere in the
user-facing documentation. Also, with the popularity of pg_upgrade,
we really need to recommend that the PG user own not only the data
directory but its parent directory too. (Without a writable parent
directory, operations such as "mv data data.old" fail immediately.
pg_upgrade itself doesn't do that, but wrapper scripts for it often do.)
Hence, adjust the "Creating a Database Cluster" section to address
these points. I also took the liberty of wordsmithing the discussion
of NFS a bit.
These considerations aren't by any means new, so back-patch to all
supported branches.
The pg_stats view is supposed to be restricted to only show rows
about tables the user can read. However, it sometimes can leak
information which could not otherwise be seen when row level security
is enabled. Fix that by not showing pg_stats rows to users that would
be subject to RLS on the table the row is related to. This is done
by creating/using the newly introduced SQL visible function,
row_security_active().
Along the way, clean up three call sites of check_enable_rls(). The second
argument of that function should only be specified as other than
InvalidOid when we are checking as a different user than the current one,
as in when querying through a view. These sites were passing GetUserId()
instead of InvalidOid, which can cause the function to return incorrect
results if the current user has the BYPASSRLS privilege and row_security
has been set to OFF.
Additionally fix a bug causing RI Trigger error messages to unintentionally
leak information when RLS is enabled, and other minor cleanup and
improvements. Also add WITH (security_barrier) to the definition of pg_stats.
Bumped CATVERSION due to new SQL functions and pg_stats view definition.
Back-patch to 9.5 where RLS was introduced. Reported by Yaroslav.
Patch by Joe Conway and Dean Rasheed with review and input by
Michael Paquier and Stephen Frost.
While postgres' use of SSL renegotiation is a good idea in theory, it
turned out to not work well in practice. The specification and openssl's
implementation of it have lead to several security issues. Postgres' use
of renegotiation also had its share of bugs.
Additionally OpenSSL has a bunch of bugs around renegotiation, reported
and open for years, that regularly lead to connections breaking with
obscure error messages. We tried increasingly complex workarounds to get
around these bugs, but we didn't find anything complete.
Since these connection breakages often lead to hard to debug problems,
e.g. spuriously failing base backups and significant latency spikes when
synchronous replication is used, we have decided to change the default
setting for ssl renegotiation to 0 (disabled) in the released
backbranches and remove it entirely in 9.5 and master.
Author: Andres Freund
Discussion: 20150624144148.GQ4797@alap3.anarazel.de
Backpatch: 9.5 and master, 9.0-9.4 get a different patch
The original implementation of TABLESAMPLE modeled the tablesample method
API on index access methods, which wasn't a good choice because, without
specialized DDL commands, there's no way to build an extension that can
implement a TSM. (Raw inserts into system catalogs are not an acceptable
thing to do, because we can't undo them during DROP EXTENSION, nor will
pg_upgrade behave sanely.) Instead adopt an API more like procedural
language handlers or foreign data wrappers, wherein the only SQL-level
support object needed is a single handler function identified by having
a special return type. This lets us get rid of the supporting catalog
altogether, so that no custom DDL support is needed for the feature.
Adjust the API so that it can support non-constant tablesample arguments
(the original coding assumed we could evaluate the argument expressions at
ExecInitSampleScan time, which is undesirable even if it weren't outright
unsafe), and discourage sampling methods from looking at invisible tuples.
Make sure that the BERNOULLI and SYSTEM methods are genuinely repeatable
within and across queries, as required by the SQL standard, and deal more
honestly with methods that can't support that requirement.
Make a full code-review pass over the tablesample additions, and fix
assorted bugs, omissions, infelicities, and cosmetic issues (such as
failure to put the added code stanzas in a consistent ordering).
Improve EXPLAIN's output of tablesample plans, too.
Back-patch to 9.5 so that we don't have to support the original API
in production.
This removes some info about support procedures being used, which was
obsoleted by commit db5f98ab4f, as well as add some more documentation
on how to create new opclasses using the Minmax infrastructure.
(Hopefully we can get something similar for Inclusion as well.)
In passing, fix some obsolete mentions of "mmtuples" in source code
comments.
Backpatch to 9.5, where BRIN was introduced.
Tom Lane
Heikki Linnakangas
Fujii Masao
Bruce Momjian
Alvaro Herrera
Magnus Hagander
Peter Eisentraut
Andres Freund
Simon Riggs
Joe Conway
Andrew Dunstan
Robert Haas