- Made some chars const as proposed by Stefan Huehner <stefan@huehner.org>.
- Synced parser and keyword lists.
- Copied two token parsing from backend parser to ecpg parser.
- Also added a test case for this.
skeleton scripts calling them. To make it easier for the buildfarm
(or other "outside callers") to use these modules directly.
Per suggestion from Andrew Dunstan.
executed in read_only mode. This could lead to various relatively-subtle
failures, such as an allegedly stable function returning non-stable results.
Bug goes all the way back to the introduction of read-only mode in 8.0.
Per report from Gaetano Mendola.
available information about the typmod of an expression; namely, Const,
ArrayRef, ArrayExpr, and EXPR and ARRAY SubLinks. In the ArrayExpr and
SubLink cases it wasn't really the data structure's fault, but exprTypmod()
being lazy. This seems like a good idea in view of the expected increase in
typmod usage from Teodor's work to allow user-defined types to have typmods.
In particular this responds to the concerns we had about eliminating the
special-purpose hack that exprTypmod() used to have for BPCHAR Consts.
We can now tell whether or not such a Const has been cast to a specific
length, and report or display properly if so.
initdb forced due to changes in stored rules.
was expecting there to be no regular table named 'foo', but it turns out
the rules test transiently creates one, so that plancache would sometimes
fail. I couldn't reproduce that in quite a few tries here, but several
buildfarm machines have shown the failure. Fix by renaming plancache's
temp table to something nonconflicting.
uses SPI plans, this finally fixes the ancient gotcha that you can't
drop and recreate a temp table used by a plpgsql function.
Along the way, clean up SPI's API a little bit by declaring SPI plan
pointers as "SPIPlanPtr" instead of "void *". This is cosmetic but
helps to forestall simple programming mistakes. (I have changed some
but not all of the callers to match; there are still some "void *"'s
in contrib and the PL's. This is intentional so that we can see if
anyone's compiler complains about it.)
did not expect that a DEAD tuple could follow a RECENTLY_DEAD tuple in an
update chain, but because the OldestXmin rule for determining deadness is a
simplification of reality, it is possible for this situation to occur
(implying that the RECENTLY_DEAD tuple is in fact dead to all observers,
but this patch does not attempt to exploit that). The code would follow a
chain forward all the way, but then stop before a DEAD tuple when backing
up, meaning that not all of the chain got moved. This could lead to copying
the chain multiple times (resulting in duplicate copies of the live tuple at
its end), or leaving dangling index entries behind (which, aside from
generating warnings from later vacuums, creates a risk of wrong query
results or bogus duplicate-key errors once the heap slot the index entry
points to is repopulated).
The fix is to recheck HeapTupleSatisfiesVacuum while following a chain
forward, and to stop if a DEAD tuple is reached. Each contiguous group
of RECENTLY_DEAD tuples will therefore be copied as a separate chain.
The patch also adds a couple of extra sanity checks to verify correct
behavior.
Per report and test case from Pavan Deolasee.
POSIX-style timezone specs that don't exactly match any database entry will
be treated as having correct USA DST rules. Also, document that this can
be changed if you want to use some other DST rules with a POSIX zone spec.
We could consider changing localtime.c's TZDEFRULESTRING, but since that
facility can only deal with one DST transition rule, it seems fairly useless
now; might as well just plan to override it using a "posixrules" entry.
Backpatch as far as 8.0. There isn't much we can do in 7.x ... either your
libc gets it right, or it doesn't.
for input/ and output/ directories, because with the addition of
largeobject_1.source, they're not the same list. Apparently the current
buildfarm process does not exercise whether 'make distclean' leaves a
clean tree behind, else the farm would have been failing for awhile.
now complete). Update for the MSVC6/Borland support now being only libpq.
Move most of the information about full MSVC build from README file into
documentation.
module and teach PREPARE and protocol-level prepared statements to use it.
In service of this, rearrange utility-statement processing so that parse
analysis does not assume table schemas can't change before execution for
utility statements (necessary because we don't attempt to re-acquire locks
for utility statements when reusing a stored plan). This requires some
refactoring of the ProcessUtility API, but it ends up cleaner anyway,
for instance we can get rid of the QueryContext global.
Still to do: fix up SPI and related code to use the plan cache; I'm tempted to
try to make SQL functions use it too. Also, there are at least some aspects
of system state that we want to ensure remain the same during a replan as in
the original processing; search_path certainly ought to behave that way for
instance, and perhaps there are others.
even if none of the fields in the pg_class row change. This behavior is
necessary to ensure other backends flush rd_targblock values that might
point to truncated-away pages. We got this right pre-8.2 but it was broken
by overoptimistic change to not write out the pg_class row if unchanged.
Per report from Pavan Deolasee.
check_sql_fn_retval allows binary-compatibility cases, the expression
extracted from an inline-able SQL function might have a type that is only
binary-compatible with the declared function result type. To avoid possibly
changing the semantics of the expression, we should insert a RelabelType node
in such cases. This has only been shown to have bad consequences in recent
8.1 and up releases, but I suspect there may be failure cases in the older
branches too, so patch it all the way back. Per bug #3116 from Greg Mullane.
Along the way, fix an omission in eval_const_expressions_mutator: it failed
to copy the relabelformat field when processing a RelabelType. No known
observable failures from this, but it definitely isn't intended behavior.
fixup various places in the tree that were clearing a StringInfo by hand.
Making this function a part of the API simplifies client code slightly,
and avoids needlessly peeking inside the StringInfo interface.
log_min_messages does; and arrange to suppress the duplicative output
that would otherwise result from log_statement and log_duration messages.
Bruce Momjian and Tom Lane.
this, add a 16-bit "flags" field to page headers by stealing some bits from
pd_tli. We use one flag bit as a hint to indicate whether there are any
unused line pointers; the remaining 15 are available for future use.
This is a cut-down form of an idea proposed by Hiroki Kataoka in July 2005.
At the time it was rejected because the original patch increased the size of
page headers and it wasn't clear that the benefit outweighed the distributed
cost. The flag-bit approach gets most of the benefit without requiring an
increase in the page header size.
Heikki Linnakangas and Tom Lane
Get rid of VARATT_SIZE and VARATT_DATA, which were simply redundant with
VARSIZE and VARDATA, and as a consequence almost no code was using the
longer names. Rename the length fields of struct varlena and various
derived structures to catch anyplace that was accessing them directly;
and clean up various places so caught. In itself this patch doesn't
change any behavior at all, but it is necessary infrastructure if we hope
to play any games with the representation of varlena headers.
Greg Stark and Tom Lane
parent query's EState. Now that there's a single flat rangetable for both
the main plan and subplans, there's no need anymore for a separate EState,
and removing it allows cleaning up some crufty code in nodeSubplan.c and
nodeSubqueryscan.c. Should be a tad faster too, although any difference
will probably be hard to measure. This is the last bit of subsidiary
mop-up work from changing to a flat rangetable.
is still needed despite cleanups in setrefs.c, because the point is to
let the inserted Result node compute a different tlist than its input
node does. Per example from Jeremy Drake.
drill down into subplan targetlists to print the referent expression for an
OUTER or INNER var in an upper plan node. Hence, make it do that always, and
banish the old hack of showing "?columnN?" when things got too complicated.
Along the way, fix an EXPLAIN bug I introduced by suppressing subqueries from
execution-time range tables: get_name_for_var_field() assumed it could look at
rte->subquery to find out the real type of a RECORD var. That doesn't work
anymore, but instead we can look at the input plan of the SubqueryScan plan
node.
and quals have varno OUTER, rather than zero, to indicate a reference to
an output of their lefttree subplan. This is consistent with the way
that every other upper-level node type does it, and allows some simplifications
in setrefs.c and EXPLAIN.
useless substructure for its RangeTblEntry nodes. (I chose to keep using the
same struct node type and just zero out the link fields for unneeded info,
rather than making a separate ExecRangeTblEntry type --- it seemed too
fragile to have two different rangetable representations.)
Along the way, put subplans into a list in the toplevel PlannedStmt node,
and have SubPlan nodes refer to them by list index instead of direct pointers.
Vadim wanted to do that years ago, but I never understood what he was on about
until now. It makes things a *whole* lot more robust, because we can stop
worrying about duplicate processing of subplans during expression tree
traversals. That's been a constant source of bugs, and it's finally gone.
There are some consequent simplifications yet to be made, like not using
a separate EState for subplans in the executor, but I'll tackle that later.
I refactored findsplitloc and checksplitloc so that the division of
labor is more clear IMO. I pushed all the space calculation inside the
loop to checksplitloc.
I also fixed the off by 4 in free space calculation caused by
PageGetFreeSpace subtracting sizeof(ItemIdData), even though it was
harmless, because it was distracting and I felt it might come back to
bite us in the future if we change the page layout or alignments.
There's now a new function PageGetExactFreeSpace that doesn't do the
subtraction.
findsplitloc now tries the "just the new item to right page" split as
well. If people don't like the refactoring, I can write a patch to just
add that.
Heikki Linnakangas
storing mostly-redundant Query trees in prepared statements, portals, etc.
To replace Query, a new node type called PlannedStmt is inserted by the
planner at the top of a completed plan tree; this carries just the fields of
Query that are still needed at runtime. The statement lists kept in portals
etc. now consist of intermixed PlannedStmt and bare utility-statement nodes
--- no Query. This incidentally allows us to remove some fields from Query
and Plan nodes that shouldn't have been there in the first place.
Still to do: simplify the execution-time range table; at the moment the
range table passed to the executor still contains Query trees for subqueries.
initdb forced due to change of stored rules.
this code was last gone over, there wasn't really any alternative to
globals because we didn't have the PlannerInfo struct being passed all
through the planner code. Now that we do, we can restructure things
to avoid non-reentrancy. I'm fooling with this because otherwise I'd
have had to add another global variable for the planned compact
range table list.
plan nodes, so that the executor does not need to get these items from
the range table at runtime. This will avoid needing to include these
fields in the compact range table I'm expecting to make the executor use.
portals using PORTAL_UTIL_SELECT strategy. This is currently significant only
for FETCH queries, which are supposed to include a count in the tag. Seems
it's been broken since 7.4, but nobody noticed before Knut Lehre.
equal functions are checked for raw parse trees as well as post-analysis
trees. This was never very important before, but the upcoming plan cache
control module will need to be able to do copyObject() on raw parse trees.
forces a particular relation nonnullable, then we can say that the OR does.
This is worth a little extra trouble since it may allow reduction of
outer joins to plain joins.
an opclass for a generic type such as ANYARRAY. The original coding failed
to check that PK and FK columns were of the same array type. Per discussion
with Tom Dunstan. Also, make the code a shade more readable by not trying
to economize on variables.
JOIN quals, just like WHERE quals, even if they reference every one of the
join's relations. Now that we can reorder outer and inner joins, it's
possible for such a qual to end up being assigned to an outer join plan node,
and we mustn't have it treated as a join qual rather than a filter qual for
the node. (If it were, the join could produce null-extended rows that it
shouldn't.) Per bug report from Pelle Johansson.
be checked at plan levels below the top; namely, we have to allow for Result
nodes inserted just above a nestloop inner indexscan. Should think about
using the general Param mechanism to pass down outer-relation variables, but
for the moment we need a back-patchable solution. Per report from Phil Frost.
to_timestamp():
- ID for day-of-week
- IDDD for day-of-year
This makes it possible to convert ISO week dates to and from text
fully represented in either week ('IYYY-IW-ID') or day-of-year
('IYYY-IDDD') format.
I have also added an 'isoyear' field for use with extract / date_part.
Brendan Jurd
o read global SSL configuration file
o add GUC "ssl_ciphers" to control allowed ciphers
o add libpq environment variable PGSSLKEY to control SSL hardware keys
Victor B. Wagner
considered when it is necessary to do so because of a join-order restriction
(that is, an outer-join or IN-subselect construct). The former coding was a
bit ad-hoc and inconsistent, and it missed some cases, as exposed by Mario
Weilguni's recent bug report. His specific problem was that an IN could be
turned into a "clauseless" join due to constant-propagation removing the IN's
joinclause, and if the IN's subselect involved more than one relation and
there was more than one such IN linking to the same upper relation, then the
only valid join orders involve "bushy" plans but we would fail to consider the
specific paths needed to get there. (See the example case added to the join
regression test.) On examining the code I wonder if there weren't some other
problem cases too; in particular it seems that GEQO was defending against a
different set of corner cases than the main planner was. There was also an
efficiency problem, in that when we did realize we needed a clauseless join
because of an IN, we'd consider clauseless joins against every other relation
whether this was sensible or not. It seems a better design is to use the
outer-join and in-clause lists as a backup heuristic, just as the rule of
joining only where there are joinclauses is a heuristic: we'll join two
relations if they have a usable joinclause *or* this might be necessary to
satisfy an outer-join or IN-clause join order restriction. I refactored the
code to have just one place considering this instead of three, and made sure
that it covered all the cases that any of them had been considering.
Backpatch as far as 8.1 (which has only the IN-clause form of the disease).
By rights 8.0 and 7.4 should have the bug too, but they accidentally fail
to fail, because the joininfo structure used in those releases preserves some
memory of there having once been a joinclause between the inner and outer
sides of an IN, and so it leads the code in the right direction anyway.
I'll be conservative and not touch them.
continuously, and requests vacuum runs of "autovacuum workers" to postmaster.
The workers do the actual vacuum work. This allows for future improvements,
like allowing multiple autovacuum jobs running in parallel.
For now, the code keeps the original behavior of having a single autovac
process at any time by sleeping until the previous worker has finished.
WHERE clauses. createplan.c is now willing to stick a gating Result node
almost anywhere in the plan tree, and in particular one can wind up directly
underneath a MergeJoin node. This means it had better be willing to handle
Mark/Restore. Fortunately, that's trivial in such cases, since we can just
pass off the call to the input node (which the planner has previously ensured
can handle Mark/Restore). Per report from Phil Frost.
equality checks it applies, instead of a random dependence on whatever
operators might be named "=". The equality operators will now be selected
from the opfamily of the unique index that the FK constraint depends on to
enforce uniqueness of the referenced columns; therefore they are certain to be
consistent with that index's notion of equality. Among other things this
should fix the problem noted awhile back that pg_dump may fail for foreign-key
constraints on user-defined types when the required operators aren't in the
search path. This also means that the former warning condition about "foreign
key constraint will require costly sequential scans" is gone: if the
comparison condition isn't indexable then we'll reject the constraint
entirely. All per past discussions.
Along the way, make the RI triggers look into pg_constraint for their
information, instead of using pg_trigger.tgargs; and get rid of the always
error-prone fixed-size string buffers in ri_triggers.c in favor of building up
the RI queries in StringInfo buffers.
initdb forced due to columns added to pg_constraint and pg_trigger.
socket is still read-ready, the code was a tight loop, wasting lots of CPU.
We can't do anything to clear the failure, other than wait, but we should give
other processes more chance to finish and release FDs; so insert a small sleep.
Also, avoid bogus "close(-1)" in this case. Per report from Jim Nasby.
that overlap an outer join's min_righthand but aren't fully contained in it,
to support joining within the RHS after having performed an outer join that
can commute with this one. Aside from the direct fix in make_join_rel(),
fix has_join_restriction() and GEQO's desirable_join() to consider this
possibility. Per report from Ian Harding.
currently have any better strategy for this query than re-running the
sub-select over and over; it seems unlikely that doing so 10000 times
is a more useful test than doing it a few dozen times.
entries for the victim database go away sooner rather than later. We already
did the equivalent thing at the per-relation level, not sure why it's not
been done for whole databases. With this change, pgstat_vacuum_tabstat
should usually not find anything to do; though we still need it as a backstop
in case DROPDB or TABPURGE messages get lost under load.
keeping private state in each backend that has inserted and deleted the same
tuple during its current top-level transaction. This is sufficient since
there is no need to be able to determine the cmin/cmax from any other
transaction. This gets us back down to 23-byte headers, removing a penalty
paid in 8.0 to support subtransactions. Patch by Heikki Linnakangas, with
minor revisions by moi, following a design hashed out awhile back on the
pghackers list.
get away with not (re)initializing a local variable if the variable is marked
"isconst" and not "isnull". Unfortunately it makes this decision after having
already freed the old value, meaning that something like
for i in 1..10 loop
declare c constant text := 'hi there';
leads to subsequent accesses to freed memory, and hence probably crashes.
(In particular, this is why Asif Ali Rehman's bug leads to crash and not
just an unexpectedly-NULL value for SQLERRM: SQLERRM is marked CONSTANT
and so triggers this error.)
The whole thing seems wrong on its face anyway: CONSTANT means that you can't
change the variable inside the block, not that the initializer expression is
guaranteed not to change value across successive block entries. Hence,
remove the "optimization" instead of trying to fix it.
DECLARE section needs to know about it. Formerly, everyplace besides DECLARE
that created variables needed to do "plpgsql_add_initdatums(NULL)" to prevent
those variables from being sucked up as part of a subsequent DECLARE block.
This is obviously error-prone, and in fact the SQLSTATE/SQLERRM patch had
failed to do it for those two variables, leading to the bug recently exhibited
by Asif Ali Rehman: a DECLARE within an exception handler tried to reinitialize
SQLERRM.
Although the SQLSTATE/SQLERRM patch isn't in any pre-8.1 branches, and so
I can't point to a demonstrable failure there, it seems wise to back-patch
this into the older branches anyway, just to keep the logic similar to HEAD.
For win32 in general, this makes it possible to run the regression tests
as an admin user by using the same restricted token method that's used
by pg_ctl and initdb.
For vc++, it adds building of pg_regress.exe, adds a resultmap, and
fixes how it runs the install.
Magnus Hagander
where possible, and fix some sites that apparently thought that fgets()
will overwrite the buffer by one byte.
Also add some strlcpy() to eliminate some weird memory handling.
> Currently, an index split writes all the data on the split page to
> WAL. That's a lot of WAL traffic. The tuples that are copied to the
> right page need to be WAL logged, but the tuples that stay on the
> original page don't.
Heikki Linnakangas
already collected in the current transaction; this allows plpgsql functions to
watch for stats updates even though they are confined to a single transaction.
Use this instead of the previous kluge involving pg_stat_file() to wait for
the stats collector to update in the stats regression test. Internally,
decouple storage of stats snapshots from transaction boundaries; they'll
now stick around until someone calls pgstat_clear_snapshot --- which xact.c
still does at transaction end, to maintain the previous behavior. This makes
the logic a lot cleaner, at the price of a couple dozen cycles per transaction
exit.
changes (with an upper limit of 30 seconds), and record the delay time in
the postmaster log. This should give us some info about what's happening
with the intermittent stats failures in buildfarm. After an idea of
Andrew Dunstan's.
"database system is ready to accept connections", which is issued by the
postmaster when it really is ready to accept connections. Per proposal from
Markus Schiltknecht and subsequent discussion.
thought that it didn't have to reposition the underlying tuplestore if the
portal is atEnd. But this is not so, because tuplestores have separate read
and write cursors ... and the read cursor hasn't moved from the start.
This mistake explains bug #2970 from William Zhang.
Note: the coding here is pretty inefficient, but given that no one has noticed
this bug until now, I'd say hardly anyone uses the case where the cursor has
been advanced before being persisted. So maybe it's not worth worrying about.
out that ExecEvalVar and friends don't necessarily have access to a tuple
descriptor with correct typmod: it definitely can contain -1, and possibly
might contain other values that are different from the Var's value.
Arguably this should be cleaned up someday, but it's not a simple change,
and in any case typmod discrepancies don't pose a security hazard.
Per reports from numerous people :-(
I'm not entirely sure whether the failure can occur in 8.0 --- the simple
test cases reported so far don't trigger it there. But back-patch the
change all the way anyway.
had stopped working for tables buried inside views or sub-selects. This is
because I had gotten rid of the simplify_jointree() preprocessing step, and
optimize_minmax_aggregates() wasn't smart enough to deal with a non-canonical
FromExpr. Per gripe from Bill Howe.
that aren't turned into true joins). Since this is the last missing bit of
infrastructure, go ahead and fill out the hash integer_ops and float_ops
opfamilies with cross-type operators. The operator family project is now
DONE ... er, except for documentation ...
describe the maximum size of index tuples (which is typically AM-dependent
anyway); and consequently remove the bogus deduction for "special space"
that was built into it.
Adjust TOAST_TUPLE_THRESHOLD and TOAST_MAX_CHUNK_SIZE to avoid wasting two
bytes per toast chunk, and to ensure that the calculation correctly tracks any
future changes in page header size. The computation had been inaccurate in a
way that didn't cause any harm except space wastage, but future changes could
have broken it more drastically.
Fix the calculation of BTMaxItemSize, which was formerly computed as 1 byte
more than it could safely be. This didn't cause any harm in practice because
it's only compared against maxalign'd lengths, but future changes in the size
of page headers or btree special space could have exposed the problem.
initdb forced because of change in TOAST_MAX_CHUNK_SIZE, which alters the
storage of toast tables.
threshold for tuple length. On 4-byte-MAXALIGN machines, the toast code
creates tuples that have t_len exactly TOAST_TUPLE_THRESHOLD ... but this
number is not itself maxaligned, so if heap_insert maxaligns t_len before
comparing to TOAST_TUPLE_THRESHOLD, it'll uselessly recurse back to
tuptoaster.c, wasting cycles. (It turns out that this does not happen on
8-byte-MAXALIGN machines, because for them the outer MAXALIGN in the
TOAST_MAX_CHUNK_SIZE macro reduces TOAST_MAX_CHUNK_SIZE so that toast tuples
will be less than TOAST_TUPLE_THRESHOLD in size. That MAXALIGN is really
incorrect, but we can't remove it now, see below.) There isn't any particular
value in maxaligning before comparing to the thresholds, so just don't do
that, which saves a small number of cycles in itself.
These numbers should be rejiggered to minimize wasted space on toast-relation
pages, but we can't do that in the back branches because changing
TOAST_MAX_CHUNK_SIZE would force an initdb (by changing the contents of toast
tables). We can move the toast decision thresholds a bit, though, which is
what this patch effectively does.
Thanks to Pavan Deolasee for discovering the unintended recursion.
Back-patch into 8.2, but not further, pending more testing. (HEAD is about
to get a further patch modifying the thresholds, so it won't help much
for testing this form of the patch.)
observe the xmloption.
Reorganize the representation of the XML option in the parse tree and the
API to make it easier to manage and understand.
Add regression tests for parsing back XML expressions.
generated solution files for what to install, instead of blindly copying
everything as it previously did. With the previous quick-n-dirty
version, it would copy old DLLs if you reconfigured in a way that didn't
include subprojects like a PL for example.
Magnus Hagander.
made query plan. Use of ALTER COLUMN TYPE creates a hazard for cached
query plans: they could contain Vars that claim a column has a different
type than it now has. Fix this by checking during plan startup that Vars
at relation scan level match the current relation tuple descriptor. Since
at that point we already have at least AccessShareLock, we can be sure the
column type will not change underneath us later in the query. However,
since a backend's locks do not conflict against itself, there is still a
hole for an attacker to exploit: he could try to execute ALTER COLUMN TYPE
while a query is in progress in the current backend. Seal that hole by
rejecting ALTER TABLE whenever the target relation is already open in
the current backend.
This is a significant security hole: not only can one trivially crash the
backend, but with appropriate misuse of pass-by-reference datatypes it is
possible to read out arbitrary locations in the server process's memory,
which could allow retrieving database content the user should not be able
to see. Our thanks to Jeff Trout for the initial report.
Security: CVE-2007-0556
we should check that the function code returns the claimed result datatype
every time we parse the function for execution. Formerly, for simple
scalar result types we assumed the creation-time check was sufficient, but
this fails if the function selects from a table that's been redefined since
then, and even more obviously fails if check_function_bodies had been OFF.
This is a significant security hole: not only can one trivially crash the
backend, but with appropriate misuse of pass-by-reference datatypes it is
possible to read out arbitrary locations in the server process's memory,
which could allow retrieving database content the user should not be able
to see. Our thanks to Jeff Trout for the initial report.
Security: CVE-2007-0555
Standard English uses "may", "can", and "might" in different ways:
may - permission, "You may borrow my rake."
can - ability, "I can lift that log."
might - possibility, "It might rain today."
Unfortunately, in conversational English, their use is often mixed, as
in, "You may use this variable to do X", when in fact, "can" is a better
choice. Similarly, "It may crash" is better stated, "It might crash".
Standard English uses "may", "can", and "might" in different ways:
may - permission, "You may borrow my rake."
can - ability, "I can lift that log."
might - possibility, "It might rain today."
Unfortunately, in conversational English, their use is often mixed, as
in, "You may use this variable to do X", when in fact, "can" is a better
choice. Similarly, "It may crash" is better stated, "It might crash".
Also update two error messages mentioned in the documenation to match.
nonportable "hh" sprintf(3) length modifier. Instead, do the parsing
and output by hand. The code to do this isn't ideal, but this is
an interim measure anyway: the uuid type should probably use the
in-memory struct layout specified by RFC 4122. For now, this patch
should hopefully rectify the buildfarm failures for the uuid test.
Along the way, re-add pg_cast entries for uuid <-> varchar, which
I mistakenly removed earlier, and bump the catversion.
In this case extractQuery should returns -1 as nentries. This changes
prototype of extractQuery method to use int32* instead of uint32* for
nentries argument.
Based on that gincostestimate may see two corner cases: nothing will be found
or seqscan should be used.
Per proposal at http://archives.postgresql.org/pgsql-hackers/2007-01/msg01581.php
PS tsearch_core patch should be sightly modified to support changes, but I'm
waiting a verdict about reviewing of tsearch_core patch.
The original coding failed (tried to access deallocated memory) if there were
two active call sites (fn_extra pointers) for the same function and the
function definition was updated. Also, if an update of a recursive function
was detected upon nested entry to the function, the existing compiled version
was summarily deallocated, resulting in crash upon return to the outer
instance. Problem observed while studying a bug report from Sergiy
Vyshnevetskiy.
Bug does not exist before 8.1 since older versions just leaked the memory of
obsoleted compiled functions, rather than trying to reclaim it.
by plpgsql can themselves use SPI --- possibly indirectly, as in the case
of domain_in() invoking plpgsql functions in a domain check constraint.
Per bug #2945 from Sergiy Vyshnevetskiy.
Somewhat arbitrarily, I've chosen to back-patch this as far as 8.0. Given
the lack of prior complaints, it doesn't seem critical for 7.x.
Hashing for aggregation purposes still needs work, so it's not time to
mark any cross-type operators as hashable for general use, but these cases
work if the operators are so marked by hand in the system catalogs.
match because they contain a null join key (and the join operator is
known strict). Improves performance significantly when the inner
relation contains a lot of nulls, as per bug #2930.
handy to prevent core dump files from disappearing, but it's useless now
because (a) we don't drop core in individual DB subdirectories anymore,
and (b) CREATE DATABASE forces an internal checkpoint anyway.
reports; inspired by the misleading CONTEXT lines shown in recent bug report
from Stefan Kaltenbrunner. Also, allow statement-type names shown in these
messages to be translated.
that defined in RFC 4122. This patch includes the basic implementation,
plus regression tests. Documentation and perhaps some additional
functionality will come later. Catversion bumped.
Patch from Gevik Babakhani; review from Peter, Tom, and myself.