unnecessary cache resets. The major changes are:
* When the queue overflows, we only issue a cache reset to the specific
backend or backends that still haven't read the oldest message, rather
than resetting everyone as in the original coding.
* When we observe backend(s) falling well behind, we signal SIGUSR1
to only one backend, the one that is furthest behind and doesn't already
have a signal outstanding for it. When it finishes catching up, it will
in turn signal SIGUSR1 to the next-furthest-back guy, if there is one that
is far enough behind to justify a signal. The PMSIGNAL_WAKEN_CHILDREN
mechanism is removed.
* We don't attempt to clean out dead messages after every message-receipt
operation; rather, we do it on the insertion side, and only when the queue
fullness passes certain thresholds.
* Split SInvalLock into SInvalReadLock and SInvalWriteLock so that readers
don't block writers nor vice versa (except during the infrequent queue
cleanout operations).
* Transfer multiple sinval messages for each acquisition of a read or
write lock.
corresponding struct definitions. This allows other headers to avoid including
certain highly-loaded headers such as rel.h and relscan.h, instead using just
relcache.h, heapam.h or genam.h, which are more lightweight and thus cause less
unnecessary dependencies.
forks. XLogOpenRelation() and the associated light-weight relation cache in
xlogutils.c is gone, and XLogReadBuffer() now takes a RelFileNode as argument,
instead of Relation.
For functions that still need a Relation struct during WAL replay, there's a
new function called CreateFakeRelcacheEntry() that returns a fake entry like
XLogOpenRelation() used to.
more logical that way, and also it reduces the amount of unnecessary includes
in bufpage.h, which is widely used.
Zdenek Kotala.
My previous patch to bufpage.h should also have credited him as author, but I
forgot (sorry about that).
There are two ways to track a snapshot: there's the "registered" list, which
is used for arbitrary long-lived snapshots; and there's the "active stack",
which is used for the snapshot that is considered "active" at any time.
This also allows users of snapshots to stop worrying about snapshot memory
allocation and freeing, and about using PG_TRY blocks around ActiveSnapshot
assignment. This is all done automatically now.
As a consequence, this allows us to reset MyProc->xmin when there are no
more snapshots registered in the current backend, reducing the impact that
long-running transactions have on VACUUM.
unnecessary #include lines in it. Also, move some tuple routine prototypes and
macros to htup.h, which allows removal of heapam.h inclusion from some .c
files.
For this to work, a new header file access/sysattr.h needed to be created,
initially containing attribute numbers of system columns, for pg_dump usage.
While at it, make contrib ltree, intarray and hstore header files more
consistent with our header style.
corrupted. (Neither is very important if SIGTERM is used to shut down the
whole database cluster together, but there's a problem if someone tries to
SIGTERM individual backends.) To do this, introduce new infrastructure
macros PG_ENSURE_ERROR_CLEANUP/PG_END_ENSURE_ERROR_CLEANUP that take care
of transiently pushing an on_shmem_exit cleanup hook. Also use this method
for createdb cleanup --- that wasn't a shared-memory-corruption problem,
but SIGTERM abort of createdb could leave orphaned files lying around.
Backpatch as far as 8.2. The shmem corruption cases don't exist in 8.1,
and the createdb usage doesn't seem important enough to risk backpatching
further.
snapmgmt.c file for the former. The header files have also been reorganized
in three parts: the most basic snapshot definitions are now in a new file
snapshot.h, and the also new snapmgmt.h keeps the definitions for snapmgmt.c.
tqual.h has been reduced to the bare minimum.
This patch is just a first step towards managing live snapshots within a
transaction; there is no functionality change.
Per my proposal to pgsql-patches on 20080318191940.GB27458@alvh.no-ip.org and
subsequent discussion.
deals with the queue, including locking etc, is all in sinvaladt.c. This means
that the struct definition of the queue, and the queue pointer, are now
internal "implementation details" inside sinvaladt.c.
Per my proposal dated 25-Jun-2007 and followup discussion.
than dividing them into 1GB segments as has been our longtime practice. This
requires working support for large files in the operating system; at least for
the time being, it won't be the default.
Zdenek Kotala
temporary table; we can't support that because there's no way to clean up the
source backend's internal state if the eventual COMMIT PREPARED is done by
another backend. This was checked correctly in 8.1 but I broke it in 8.2 :-(.
Patch by Heikki Linnakangas, original trouble report by John Smith.
whether to execute an immediate interrupt, rather than testing whether
LockWaitCancel() cancelled a lock wait. The old way misclassified the case
where we were blocked in ProcWaitForSignal(), and arguably would misclassify
any other future additions of new ImmediateInterruptOK states too. This
allows reverting the old kluge that gave LockWaitCancel() a return value,
since no callers care anymore. Improve comments in the various
implementations of PGSemaphoreLock() to explain that on some platforms, the
assumption that semop() exits after a signal is wrong, and so we must ensure
that the signal handler itself throws elog if we want cancel or die interrupts
to be effective. Per testing related to bug #3883, though this patch doesn't
solve those problems fully.
Perhaps this change should be back-patched, but since pre-8.3 branches aren't
really relying on autovacuum to respond to SIGINT, it doesn't seem critical
for them.
checkpoint. This guards against an unlikely data-loss scenario in which
we re-use the relfilenode, then crash, then replay the deletion and
recreation of the file. Even then we'd be OK if all insertions into the
new relation had been WAL-logged ... but that's not guaranteed given all
the no-WAL-logging optimizations that have recently been added.
Patch by Heikki Linnakangas, per a discussion last month.
having several of them. Add two more flags: whether the process is
executing an ANALYZE, and whether a vacuum is for Xid wraparound (which
is obviously only set by autovacuum).
Sneakily move the worker's recently-acquired PostAuthDelay to a more useful
place.
buffers that cannot possibly need to be cleaned, and estimates how many
buffers it should try to clean based on moving averages of recent allocation
requests and density of reusable buffers. The patch also adds a couple
more columns to pg_stat_bgwriter to help measure the effectiveness of the
bgwriter.
Greg Smith, building on his own work and ideas from several other people,
in particular a much older patch from Itagaki Takahiro.
unpruned XMAX in its header. At the cost of 4 bytes per page, this keeps us
from performing heap_page_prune when there's no chance of pruning anything.
Seems to be necessary per Heikki's preliminary performance testing.
columns, and the new version can be stored on the same heap page, we no longer
generate extra index entries for the new version. Instead, index searches
follow the HOT-chain links to ensure they find the correct tuple version.
In addition, this patch introduces the ability to "prune" dead tuples on a
per-page basis, without having to do a complete VACUUM pass to recover space.
VACUUM is still needed to clean up dead index entries, however.
Pavan Deolasee, with help from a bunch of other people.
than two independent bits (one of which was never used in heap pages anyway,
or at least hadn't been in a very long time). This gives us flexibility to
add the HOT notions of redirected and dead item pointers without requiring
anything so klugy as magic values of lp_off and lp_len. The state values
are chosen so that for the states currently in use (pre-HOT) there is no
change in the physical representation.
ReadNewTransactionId from GetSnapshotData --- with a "latestCompletedXid"
variable that is updated during transaction commit or abort. Since
latestCompletedXid is written only in places that had to lock ProcArrayLock
exclusively anyway, and is read only in places that had to lock ProcArrayLock
shared anyway, it adds no new locking requirements to the system despite being
cluster-wide. Moreover, removing ReadNewTransactionId from snapshot
acquisition eliminates the need to take both XidGenLock and ProcArrayLock at
the same time. Since XidGenLock is sometimes held across I/O this can be a
significant win. Some preliminary benchmarking suggested that this patch has
no effect on average throughput but can significantly improve the worst-case
transaction times seen in pgbench. Concept by Florian Pflug, implementation
by Tom Lane.
rows will normally never obtain an XID at all. We already did things this way
for subtransactions, but this patch extends the concept to top-level
transactions. In applications where there are lots of short read-only
transactions, this should improve performance noticeably; not so much from
removal of the actual XID-assignments, as from reduction of overhead that's
driven by the rate of XID consumption. We add a concept of a "virtual
transaction ID" so that active transactions can be uniquely identified even
if they don't have a regular XID. This is a much lighter-weight concept:
uniqueness of VXIDs is only guaranteed over the short term, and no on-disk
record is made about them.
Florian Pflug, with some editorialization by Tom.
with the recent patch to log temp file sizes at removal time. Doesn't seem
worth fixing since it's unused.
In passing, make a few elog messages conform to the message style guide.
over a fairly long period of time, rather than being spat out in a burst.
This happens only for background checkpoints carried out by the bgwriter;
other cases, such as a shutdown checkpoint, are still done at full speed.
Remove the "all buffers" scan in the bgwriter, and associated stats
infrastructure, since this seems no longer very useful when the checkpoint
itself is properly throttled.
Original patch by Itagaki Takahiro, reworked by Heikki Linnakangas,
and some minor API editorialization by me.
within a signal handler (this might be safe given the relatively narrow code
range in which the interrupt is enabled, but it seems awfully risky); do issue
more informative log messages that tell what is being waited for and the exact
length of the wait; minor other code cleanup. Greg Stark and Tom Lane
for each temp file, rather than once per sort or hashjoin; this allows
spreading the data of a large sort or join across multiple tablespaces.
(I remain dubious that this will make any difference in practice, but certain
people insisted.) Arrange to cache the results of parsing the GUC variable
instead of recomputing from scratch on every demand, and push usage of the
cache down to the bottommost fd.c level.
tablespace(s) in which to store temp tables and temporary files. This is a
list to allow spreading the load across multiple tablespaces (a random list
element is chosen each time a temp object is to be created). Temp files are
not stored in per-database pgsql_tmp/ directories anymore, but per-tablespace
directories.
Jaime Casanova and Albert Cervera, with review by Bernd Helmle and Tom Lane.
will exit before failing because of conflicting DB usage. Per discussion,
this seems a good idea to help mask the fact that backend exit takes nonzero
time. Remove a couple of thereby-obsoleted sleeps in contrib and PL
regression test sequences.
buffers, rather than blowing out the whole shared-buffer arena. Aside from
avoiding cache spoliation, this fixes the problem that VACUUM formerly tended
to cause a WAL flush for every page it modified, because we had it hacked to
use only a single buffer. Those flushes will now occur only once per
ring-ful. The exact ring size, and the threshold for seqscans to switch into
the ring usage pattern, remain under debate; but the infrastructure seems
done. The key bit of infrastructure is a new optional BufferAccessStrategy
object that can be passed to ReadBuffer operations; this replaces the former
StrategyHintVacuum API.
This patch also changes the buffer usage-count methodology a bit: we now
advance usage_count when first pinning a buffer, rather than when last
unpinning it. To preserve the behavior that a buffer's lifetime starts to
decrease when it's released, the clock sweep code is modified to not decrement
usage_count of pinned buffers.
Work not done in this commit: teach GiST and GIN indexes to use the vacuum
BufferAccessStrategy for vacuum-driven fetches.
Original patch by Simon, reworked by Heikki and again by Tom.
from the WAL data, don't bother to physically read it; just have bufmgr.c
return a zeroed-out buffer instead. This speeds recovery significantly,
and also avoids unnecessary failures when a page-to-be-overwritten has corrupt
page headers on disk. This replaces a former kluge that accomplished the
latter by pretending zero_damaged_pages was always ON during WAL recovery;
which was OK when the kluge was put in, but is unsafe when restoring a WAL
log that was written with full_page_writes off.
Heikki Linnakangas
