the relcache, and so the notion of 'blind write' is gone. This should
improve efficiency in bgwriter and background checkpoint processes.
Internal restructuring in md.c to remove the not-very-useful array of
MdfdVec objects --- might as well just use pointers.
Also remove the long-dead 'persistent main memory' storage manager (mm.c),
since it seems quite unlikely to ever get resurrected.
Make btree index creation and initial validation of foreign-key constraints
use maintenance_work_mem rather than work_mem as their memory limit.
Add some code to guc.c to allow these variables to be referenced by their
old names in SHOW and SET commands, for backwards compatibility.
a series of numbers, optionally using an explicit step size other
than the default value (one). Use function in the information_schema
to replace hard-wired knowledge of INDEX_MAX_KEYS. initdb forced due
to pg_proc change. Documentation update still needed -- will be
committed separately.
should not be too eager to reject paths involving unknown schemas, since
it can't really tell whether the schemas exist in the target database.
(Also, when reading pg_dumpall output, it could be that the schemas
don't exist yet, but eventually will.) ALTER USER SET has a similar issue.
So, reduce the normal ERROR to a NOTICE when checking search_path values
for these commands. Supporting this requires changing the API for GUC
assign_hook functions, which causes the patch to touch a lot of places,
but the changes are conceptually trivial.
for sure...). Rather than relying on the query context of a rangetable
entry to identify what permissions it wants checked, store a full AclMode
mask in each RTE, and check exactly those bits. This allows an RTE
specifying, say, INSERT privilege on a view to be copied into a derived
UPDATE query without changing meaning. Per recent discussion thread.
initdb forced due to change of stored rule representation.
- Update comment in IsReservedName() to the present day
- Improve some variable & function names in commands/vacuum.c. I
was planning to rewrite this to avoid lappend(), but since I
still intend to do the list rewrite, there's no need for that.
- Update some smgr comments which seemed to imply that we still
forced all dirty pages to disk at commit-time.
- Replace some #ifdef DIAGNOSTIC code with assertions.
- Make the distinction between OS-level file descriptors and
virtual file descriptors a little clearer in a few comments
- Other minor comment improvements in the smgr code
> > needed, and other people in the past asked about it too.
>
> It is in Oracle, but you aren't exactly on the spot. It should be
>
> IYYY - 4 digits ('2003')
> IYY - 3 digits ('003')
> IY - 2 digits ('03')
> I - 1 digit ('3')
Here is an updated patch that does that.
Kurt Roeckx
to certain compile-time options (FUNC_MAX_ARGS, INDEX_MAX_KEYS,
NAMEDATALEN, BLCKSZ, HAVE_INT64_TIMESTAMP). Also added "category",
"short_desc", and "extra_desc" to the pg_settings view. Per recent
discussion here:
http://archives.postgresql.org/pgsql-patches/2003-11/msg00363.php
and hash bucket-size estimation. Issue has been there awhile but is more
critical in 7.4 because it affects varchar columns. Per report from
Greg Stark.
proposal for eventually deprecating OIDs on user tables that I posted
earlier to pgsql-hackers. pg_dump now always specifies WITH OIDS or
WITHOUT OIDS when dumping a table. The documentation has been updated.
Neil Conway
to note:
1) arttype is numeric. I thought this was the best way of allowing
arbitarily large factorials, even though factorial(2^63) is a large
number. Happy to change to integers if this is overkill.
2) since we're accepting numeric arguments, the patch tests for floats.
If a numeric is passed with non-zero decimal portion, an error is raised
since (from memory) they are undefined.
Gavin Sherry
large objects. Dump all these in pg_dump; also add code to pg_dump
user-defined conversions. Make psql's large object code rely on
the backend for inserting/deleting LOB comments, instead of trying to
hack pg_description directly. Documentation and regression tests added.
Christopher Kings-Lynne, code reviewed by Tom
pghackers proposal of 8-Nov. All the existing cross-type comparison
operators (int2/int4/int8 and float4/float8) have appropriate support.
The original proposal of storing the right-hand-side datatype as part of
the primary key for pg_amop and pg_amproc got modified a bit in the event;
it is easier to store zero as the 'default' case and only store a nonzero
when the operator is actually cross-type. Along the way, remove the
long-since-defunct bigbox_ops operator class.
Remove the 'strategy map' code, which was a large amount of mechanism
that no longer had any use except reverse-mapping from procedure OID to
strategy number. Passing the strategy number to the index AM in the
first place is simpler and faster.
This is a preliminary step in planned support for cross-datatype index
operations. I'm committing it now since the ScanKeyEntryInitialize()
API change touches quite a lot of files, and I want to commit those
changes before the tree drifts under me.
ACL array, and force languages to be treated as owned by the bootstrap
user ID. (pg_language should have a lanowner column, but until it does
this will have to do as a workaround.)
with required outer parentheses. Breakage seems to be leftover from
domain-constraint patches. This could be smarter about suppressing
extra parens, but at this stage of the release cycle I want certainty
not cuteness.
discussion on pgsql-hackers: in READ COMMITTED mode we just have to force
a QuerySnapshot update in the trigger, but in SERIALIZABLE mode we have
to run the scan under a current snapshot and then complain if any rows
would be updated/deleted that are not visible in the transaction snapshot.
to allow es_snapshot to be set to SnapshotNow rather than a query snapshot.
This solves a bug reported by Wade Klaver, wherein triggers fired as a
result of RI cascade updates could misbehave.
now able to cope with assigning new relfilenode values to nailed-in-cache
indexes, so they can be reindexed using the fully crash-safe method. This
leaves only shared system indexes as special cases. Remove the 'index
deactivation' code, since it provides no useful protection in the shared-
index case. Require reindexing of shared indexes to be done in standalone
mode, but remove other restrictions on REINDEX. -P (IgnoreSystemIndexes)
now prevents using indexes for lookups, but does not disable index updates.
It is therefore safe to allow from PGOPTIONS. Upshot: reindexing system catalogs
can be done without a standalone backend for all cases except
shared catalogs.
SQLSTATE error codes required by SQL99 (invalid format, datetime field
overflow, interval field overflow, invalid time zone displacement value).
Also emit a HINT about DateStyle in cases where it seems appropriate.
Per recent gripes.
lumping them into ERRCODE_UNDEFINED_OBJECT/ERRCODE_DUPLICATE_OBJECT.
This seems reasonable since 'object' was meant to refer to 'object in the
database' and a file is outside the database. Per request from Dave
Cramer.
as well as the hash function (formerly the comparison function was hardwired
as memcmp()). This makes it possible to eliminate the special-purpose
hashtable management code in execGrouping.c in favor of using dynahash to
manage tuple hashtables; which is a win because dynahash knows how to expand
a hashtable when the original size estimate was too small, whereas the
special-purpose code was too stupid to do that. (See recent gripe from
Stephan Szabo about poor performance when hash table size estimate is way
off.) Free side benefit: when using string_hash, the default comparison
function is now strncmp() instead of memcmp(). This should eliminate some
part of the overhead associated with larger NAMEDATALEN values.
datatype by array_eq and array_cmp; use this to solve problems with memory
leaks in array indexing support. The parser's equality_oper and ordering_oper
routines also use the cache. Change the operator search algorithms to look
for appropriate btree or hash index opclasses, instead of assuming operators
named '<' or '=' have the right semantics. (ORDER BY ASC/DESC now also look
at opclasses, instead of assuming '<' and '>' are the right things.) Add
several more index opclasses so that there is no regression in functionality
for base datatypes. initdb forced due to catalog additions.
target columns in INSERT and UPDATE targetlists. Don't rely on resname
to be accurate in ruleutils, either. This fixes bug reported by
Donald Fraser, in which renaming a column referenced in a rule did not
work very well.
writing one more value into return arrays than will fit. This is
potentially a stack smash, though I do not think it is a problem in
current uses of the routine, since a failure return causes elog anyway.
materialized.
New items have been added to GucContext and GucSource enums, but of
course they were not added to the corresponding GucContextName[] and
GucSourceName[] arrays in the patch. Here's a new patch to fix the
resulting bugs.
Joe Conway
>>ISTM that "source" is worth knowing.
>
> Hm, possibly. Any other opinions?
This version has the seven fields I proposed, including "source". Here's
an example that shows why I think it's valuable:
regression=# \x
Expanded display is on.
regression=# select * from pg_settings where name = 'enable_seqscan';
-[ RECORD 1 ]-----------
name | enable_seqscan
setting | on
context | user
vartype | bool
source | default
min_val |
max_val |
regression=# update pg_settings set setting = 'off' where name =
'enable_seqscan';
-[ RECORD 1 ]---
set_config | off
regression=# select * from pg_settings where name = 'enable_seqscan';
-[ RECORD 1 ]-----------
name | enable_seqscan
setting | off
context | user
vartype | bool
source | session
min_val |
max_val |
regression=# alter user postgres set enable_seqscan to 'off';
ALTER USER
(log out and then back in again)
regression=# \x
Expanded display is on.
regression=# select * from pg_settings where name = 'enable_seqscan';
-[ RECORD 1 ]-----------
name | enable_seqscan
setting | off
context | user
vartype | bool
source | user
min_val |
max_val |
In the first case, enable_seqscan is set to its default value. After
setting it to off, it is obvious that the value has been changed for the
session only. In the third case, you can see that the value has been set
specifically for the user.
Joe Conway
for the sign of timezone offsets, ie, positive is east from UTC. These
were previously out of step with other operations that accept or show
timezones, such as I/O of timestamptz values.
without needing a running backend. Reorder postgresql.conf.sample
to match new layout of runtime.sgml. This commit re-adds work lost
in Wednesday's crash.
It also works to create a non-polymorphic aggregate from polymorphic
functions, should you want to do that. Regression test added, docs still
lacking. By Joe Conway, with some kibitzing from Tom Lane.
comparison functions), replacing the highly bogus bitwise array_eq. Create
a btree index opclass for ANYARRAY --- it is now possible to create indexes
on array columns.
Arrange to cache the results of catalog lookups across multiple array
operations, instead of repeating the lookups on every call.
Add string_to_array and array_to_string functions.
Remove singleton_array, array_accum, array_assign, and array_subscript
functions, since these were for proof-of-concept and not intended to become
supported functions.
Minor adjustments to behavior in some corner cases with empty or
zero-dimensional arrays.
Joe Conway (with some editorializing by Tom Lane).
Regression tests for IPv6 operations added.
Documentation updated to document IPv6 bits.
Stop treating IPv4 as an "unsigned int" and IPv6 as an array of
characters. Instead, always use the array of characters so we
can have one function fits all. This makes bitncmp(), addressOK(),
and several other functions "just work" on both address families.
add family() function which returns integer 4 or 6 for IPv4 or
IPv6. (See examples below) Note that to add this new function
you will need to dump/initdb/reload or find the correct magic
to add the function to the postgresql function catalogs.
IPv4 addresses always sort before IPv6.
On disk we use AF_INET for IPv4, and AF_INET+1 for IPv6 addresses.
This prevents the need for a dump and reload, but lets IPv6 parsing
work on machines without AF_INET6.
To select all IPv4 addresses from a table:
select * from foo where family(addr) = 4 ...
Order by and other bits should all work.
Michael Graff
specific hash functions used by hash indexes, rather than the old
not-datatype-aware ComputeHashFunc routine. This makes it safe to do
hash joining on several datatypes that previously couldn't use hashing.
The sets of datatypes that are hash indexable and hash joinable are now
exactly the same, whereas before each had some that weren't in the other.
free'd for every transaction or statement, respectively. This patch
puts these data structures into static memory, thus saving a few CPU
cycles and two malloc calls per transaction or (in isolation level
READ COMMITTED) per query.
Manfred Koizar
of an index can now be a computed expression instead of a simple variable.
Restrictions on expressions are the same as for predicates (only immutable
functions, no sub-selects). This fixes problems recently introduced with
inlining SQL functions, because the inlining transformation is applied to
both expression trees so the planner can still match them up. Along the
way, improve efficiency of handling index predicates (both predicates and
index expressions are now cached by the relcache) and fix 7.3 oversight
that didn't record dependencies of predicate expressions.
blanks, in hopes of reducing the surprise factor for newbies. Remove
redundant operators for VARCHAR (it depends wholly on TEXT operations now).
Clean up resolution of ambiguous operators/functions to avoid surprising
choices for domains: domains are treated as equivalent to their base types
and binary-coercibility is no longer considered a preference item when
choosing among multiple operators/functions. IsBinaryCoercible now correctly
reflects the notion that you need *only* relabel the type to get from type
A to type B: that is, a domain is binary-coercible to its base type, but
not vice versa. Various marginal cleanup, including merging the essentially
duplicate resolution code in parse_func.c and parse_oper.c. Improve opr_sanity
regression test to understand about binary compatibility (using pg_cast),
and fix a couple of small errors in the catalogs revealed thereby.
Restructure "special operator" handling to fetch operators via index opclasses
rather than hardwiring assumptions about names (cleans up the pattern_ops
stuff a little).
single-byte encodings, and a direct C implementation of the single-argument
forms (where spaces are always what gets trimmed). This is in preparation
for using rtrim1() as the bpchar-to-text cast operator, but is a useful
performance improvement even if we decide not to do that.
Ross Reedstrom, a couple months back) and to detect timezones that are
using leap-second timekeeping. The unknown-zone-name test is pretty
heuristic and ugly, but it seems better than the old behavior of just
switching to GMT given a bad name. Also make DecodePosixTimezone() a
tad more robust.
Win32 port is now called 'win32' rather than 'win'
add -lwsock32 on Win32
make gethostname() be only used when kerberos4 is enabled
use /port/getopt.c
new /port/opendir.c routines
disable GUC unix_socket_group on Win32
convert some keywords.c symbols to KEYWORD_P to prevent conflict
create new FCNTL_NONBLOCK macro to turn off socket blocking
create new /include/port.h file that has /port prototypes, move
out of c.h
new /include/port/win32_include dir to hold missing include files
work around ERROR being defined in Win32 includes
handle multiple 'formats' for data I/O. Restructure CommandDest and
DestReceiver stuff one more time (it's finally starting to look a bit
clean though). Code now matches latest 3.0 protocol document as far
as message formats go --- but there is no support for binary I/O yet.
DestReceiver pointers instead of just CommandDest values. The DestReceiver
is made at the point where the destination is selected, rather than
deep inside the executor. This cleans up the original kluge implementation
of tstoreReceiver.c, and makes it easy to support retrieving results
from utility statements inside portals. Thus, you can now do fun things
like Bind and Execute a FETCH or EXPLAIN command, and it'll all work
as expected (e.g., you can Describe the portal, or use Execute's count
parameter to suspend the output partway through). Implementation involves
stuffing the utility command's output into a Tuplestore, which would be
kind of annoying for huge output sets, but should be quite acceptable
for typical uses of utility commands.
Both plannable queries and utility commands are now always executed
within Portals, which have been revamped so that they can handle the
load (they used to be good only for single SELECT queries). Restructure
code to push command-completion-tag selection logic out of postgres.c,
so that it won't have to be duplicated between simple and extended queries.
initdb forced due to addition of a field to Query nodes.
initial values and runtime changes in selected parameters. This gets
rid of the need for an initial 'select pg_client_encoding()' query in
libpq, bringing us back to one message transmitted in each direction
for a standard connection startup. To allow server version to be sent
using the same GUC mechanism that handles other parameters, invent the
concept of a never-settable GUC parameter: you can 'show server_version'
but it's not settable by any GUC input source. Create 'lc_collate' and
'lc_ctype' never-settable parameters so that people can find out these
settings without need for pg_controldata. (These side ideas were all
discussed some time ago in pgsql-hackers, but not yet implemented.)
rewritten and the protocol is changed, but most elog calls are still
elog calls. Also, we need to contemplate mechanisms for controlling
all this functionality --- eg, how much stuff should appear in the
postmaster log? And what API should libpq expose for it?
