The loop to generate seed data will exit on RAND_status(), so we don't
need to handle the case of RAND_poll() failing separately. Failures
here are rare, so this a code cleanup, essentially.
Daniel Gustafsson, reviewed by David Steele and Michael Paquier.
Discussion: https://postgr.es/m/9B038FA5-23E8-40D0-B932-D515E1D8F66A@yesql.se
Includes some manual cleanup of places that pgindent messed up,
most of which weren't per project style anyway.
Notably, it seems some people didn't absorb the style rules of
commit c9d297751, because there were a bunch of new occurrences
of function calls with a newline just after the left paren, all
with faulty expectations about how the rest of the call would get
indented.
The additional pain from level 4 is excessive for the gain.
Also revert all the source annotation changes to their original
wordings, to avoid back-patching pain.
Discussion: https://postgr.es/m/31166.1589378554@sss.pgh.pa.us
Use it at level 4, a bit more restrictive than the default level, and
tweak our commanding comments to FALLTHROUGH.
(However, leave zic.c alone, since it's external code; to avoid the
warnings that would appear there, change CFLAGS for that file in the
Makefile.)
Author: Julien Rouhaud <rjuju123@gmail.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20200412081825.qyo5vwwco3fv4gdo@nol
Discussion: https://postgr.es/m/flat/E1fDenm-0000C8-IJ@gemulon.postgresql.org
Writing a trailing semicolon in a macro is almost never the right thing,
because you almost always want to write a semicolon after each macro
call instead. (Even if there was some reason to prefer not to, pgindent
would probably make a hash of code formatted that way; so within PG the
rule should basically be "don't do it".) Thus, if we have a semi inside
the macro, the compiler sees "something;;". Much of the time the extra
empty statement is harmless, but it could lead to mysterious syntax
errors at call sites. In perhaps an overabundance of neatnik-ism, let's
run around and get rid of the excess semicolons whereever possible.
The only thing worse than a mysterious syntax error is a mysterious
syntax error that only happens in the back branches; therefore,
backpatch these changes where relevant, which is most of them because
most of these mistakes are old. (The lack of reported problems shows
that this is largely a hypothetical issue, but still, it could bite
us in some future patch.)
John Naylor and Tom Lane
Discussion: https://postgr.es/m/CACPNZCs0qWTqJ2QUSGJ07B7uvAvzMb-KbG2q+oo+J3tsWN5cqw@mail.gmail.com
GetLocaleInfoEx() can fail on strings that setlocale() was perfectly
happy with. A common way for that to happen is if the locale string
is actually a Unix-style string, say "et_EE.UTF-8". In that case,
what's after the dot is an encoding name, not a Windows codepage number;
blindly treating it as a codepage number led to failure, with a fairly
silly error message. Hence, check to see if what's after the dot is
all digits, and if not, treat it as a literal encoding name rather than
a codepage number. This will do the right thing with many Unix-style
locale strings, and produce a more sensible error message otherwise.
Somewhat independently of that, treat a zero (CP_ACP) result from
GetLocaleInfoEx() as meaning that we must use UTF-8 encoding.
Back-patch to all supported branches.
Juan José Santamaría Flecha
Discussion: https://postgr.es/m/24905.1585445371@sss.pgh.pa.us
src/port/getopt_long.c failed on such an argument, always seeing it
as an unrecognized switch. This is unhelpful; better is to treat such
an item as a non-switch argument. That behavior is what we find in
GNU's getopt_long(); it's what src/port/getopt.c does; and it is
required by POSIX for getopt(), which getopt_long() ought to be
generally a superset of. Moreover, it's expected by ecpg, which
intends an argument of "-" to mean "read from stdin". So fix it.
Also add some documentation about ecpg's behavior in this area, since
that was miserably underdocumented. I had to reverse-engineer it
from the code.
Per bug #16304 from James Gray. Back-patch to all supported branches,
since this has been broken forever.
Discussion: https://postgr.es/m/16304-c662b00a1322db7f@postgresql.org
This removes another relic from the old nmake-based Windows build.
version_stamp.pl put version number information into win32ver.rc. But
win32ver.rc already gets other version number information from the
preprocessor at build time, so it would make more sense if all version
number information would be handled in the same way and we don't have
two places that do it.
What we need for this is having the major version number and the minor
version number as separate integer symbols. Both configure and
Solution.pm already have that logic, because they compute
PG_VERSION_NUM. So we just keep all the logic there now. Put the
minor version number into a new symbol PG_MINORVERSION_NUM. Also, add
a symbol PG_MAJORVERSION_NUM, which is a number, alongside the
existing PG_MAJORVERSION, which is a string.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/1ee46ac4-a9b2-4531-bf54-5ec2e374634d@2ndquadrant.com
Windows has this since _MSC_VER >= 1200, and so do all other live
platforms according to the buildfarm, so remove the configure probe
and src/port/ substitution.
This is part of a series of commits to get rid of no-longer-relevant
configure checks and dead src/port/ code. I'm committing them separately
to make it easier to back out individual changes if they prove less
portable than I expect.
Discussion: https://postgr.es/m/15379.1582221614@sss.pgh.pa.us
Windows has this, and so do all other live platforms according to the
buildfarm, so remove the configure probe and src/port/ substitution.
This also lets us get rid of some configure probes that existed only
to support src/port/isinf.c. I kept the port.h hack to force using
__builtin_isinf() on clang, though.
This is part of a series of commits to get rid of no-longer-relevant
configure checks and dead src/port/ code. I'm committing them separately
to make it easier to back out individual changes if they prove less
portable than I expect.
Discussion: https://postgr.es/m/15379.1582221614@sss.pgh.pa.us
Windows has this, and so do all other live platforms according to the
buildfarm, so remove the configure probe and src/port/ substitution.
Keep the probe that detects whether _LARGEFILE_SOURCE has to be
defined to get that, though ... that seems to be still relevant in
some places.
This is part of a series of commits to get rid of no-longer-relevant
configure checks and dead src/port/ code. I'm committing them separately
to make it easier to back out individual changes if they prove less
portable than I expect.
Discussion: https://postgr.es/m/15379.1582221614@sss.pgh.pa.us
e2e0219 has removed a code path for Windows 2000 that attempts to load
wship6.dll as fallback if ws2_32.dll is found but not getaddrinfo(),
leaving behind a dangling pointer as the library is freed. However,
there is no point in this check as ws2_32.dll exists since Windows XP,
so just remove the duplicated check.
Reported-by: Tom Lane
Discussion: https://postgr.es/m/9781.1582146114@sss.pgh.pa.us
This fixes and updates a couple of comments related to outdated Windows
versions. Particularly, src/common/exec.c had a fallback implementation
to read a file's line from a pipe because stdin/stdout/stderr does not
exist in Windows 2000 that is removed to simplify src/common/ as there
are unlikely versions of Postgres running on such platforms.
Author: Michael Paquier
Reviewed-by: Kyotaro Horiguchi, Juan José Santamaría Flecha
Discussion: https://postgr.es/m/20191219021526.GC4202@paquier.xyz
We used to strategically place newlines after some function call left
parentheses to make pgindent move the argument list a few chars to the
left, so that the whole line would fit under 80 chars. However,
pgindent no longer does that, so the newlines just made the code
vertically longer for no reason. Remove those newlines, and reflow some
of those lines for some extra naturality.
Reviewed-by: Michael Paquier, Tom Lane
Discussion: https://postgr.es/m/20200129200401.GA6303@alvherre.pgsql
For historical reasons, libpq used a separate libpq.rc file for the
Windows builds while all other components use a common file
win32ver.rc. With a bit of tweaking, the libpq build can also use the
win32ver.rc file. This removes a bit of duplicative code.
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://www.postgresql.org/message-id/flat/ad505e61-a923-e114-9f38-9867d161073f@2ndquadrant.com
This fixes a performance problem introduced by commit 6d7547c21.
ERROR_ACCESS_DENIED is returned in some other cases besides the
delete-pending case considered by that commit; notably, if the
given path names a directory instead of a plain file. In that
case we'll uselessly loop for 1 second before returning the
failure condition. That slows down some usage scenarios enough
to cause test timeout failures on our Windows buildfarm critters.
To fix, try to stat() the file, and sleep/loop only if that fails.
It will fail in the delete-pending case, and also in the case where
the deletion completed before we could stat(), so we have the cases
where we want to loop covered. In the directory case, the stat()
should succeed, letting us exit without a wait.
One case where we'll still wait uselessly is if the access-denied
problem pertains to a directory in the given pathname. But we don't
expect that to happen in any performance-critical code path.
There might be room to refine this further, but I'll push it now
in hopes of making the buildfarm green again.
Back-patch, like the preceding commit.
Alexander Lakhin and Tom Lane
Discussion: https://postgr.es/m/23073.1576626626@sss.pgh.pa.us
Attempting to open a file fails with ERROR_ACCESS_DENIED if the file
is flagged for deletion but not yet actually gone (another in a long
list of reasons why Windows is broken, if you ask me). This seems
likely to explain a lot of irreproducible failures we see in the
buildfarm. This state generally persists for only a millisecond or so,
so just wait a bit and retry. If it's a real permissions problem,
we'll eventually give up and report it as such. If it's the pending
deletion case, we'll see file-not-found and report that after the
deletion completes, and the caller will treat that in an appropriate
way.
In passing, rejigger the existing retry logic for some other error
cases so that we don't uselessly wait an extra time when we're
not going to retry anymore.
Alexander Lakhin (with cosmetic tweaks by me). Back-patch to all
supported branches, since this seems like a pretty safe change and
the problem is definitely real.
Discussion: https://postgr.es/m/16161-7a985d2f1bbe8f71@postgresql.org
When ReadFile() encounters the end of a file while reading from
a synchronous handle with an offset provided via OVERLAPPED, it
reports an error instead of returning 0. By not handling that
(undocumented) result correctly, we caused some noisy LOG
messages about an unknown error code. Repair.
Back-patch to 12, where we started using pread()/ReadFile() with
an offset.
Reported-by: ZhenHua Cai, Amit Kapila
Diagnosed-by: Juan Jose Santamaria Flecha
Tested-by: Amit Kapila
Discussion: https://postgr.es/m/CAA4eK1LK3%2BWRtpz68TiRdpHwxxWm%3D%2Bt1BMf-G68hhQsAQ41PZg%40mail.gmail.com
When maintaining or merging patches, one of the most common sources
for conflicts are the list of objects in makefiles. Especially when
the split across lines has been changed on both sides, which is
somewhat common due to attempting to stay below 80 columns, those
conflicts are unnecessarily laborious to resolve.
By splitting, and alphabetically sorting, OBJS style lines into one
object per line, conflicts should be less frequent, and easier to
resolve when they still occur.
Author: Andres Freund
Discussion: https://postgr.es/m/20191029200901.vww4idgcxv74cwes@alap3.anarazel.de
It emerges that recent versions of Windows (at least 2016 Standard)
spell this locale name as "Norwegian Bokmål_Norway.1252", defeating
our mapping code that translates "Norwegian (Bokmål)_Norway" to
something that's all-ASCII (cf commits db29620d4 and aa1d2fc5e).
Add another mapping entry to handle this spelling.
Per bug #16068 from Robert Ford. Like the previous patches,
back-patch to all supported branches.
Discussion: https://postgr.es/m/16068-4cb6eeaa7eb46d93@postgresql.org
POSIX sigaction(2) can be told to block a set of signals while a
signal handler executes. Make use of that instead of manually
blocking and unblocking signals in the postmaster's signal handlers.
This should save a few cycles, and it also prevents recursive
invocation of signal handlers when many signals arrive in close
succession. We have seen buildfarm failures that seem to be due to
postmaster stack overflow caused by such recursion (exacerbated by
a Linux PPC64 kernel bug).
This doesn't change anything about the way that it works on Windows.
Somebody might consider adjusting port/win32/signal.c to let it work
similarly, but I'm not in a position to do that.
For the moment, just apply to HEAD. Possibly we should consider
back-patching this, but it'd be good to let it age awhile first.
Discussion: https://postgr.es/m/14878.1570820201@sss.pgh.pa.us
As of d9dd406fe2, we require MSVC 2013,
which means _MSC_VER >= 1800. This means that conditionals about
older versions of _MSC_VER can be removed or simplified.
Previous code was also in some cases handling MinGW, where _MSC_VER is
not defined at all, incorrectly, such as in pg_ctl.c and win32_port.h,
leading to some compiler warnings. This should now be handled better.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Use the explicit_bzero() function in places where it is important that
security information such as passwords is cleared from memory. There
might be other places where it could be useful; this is just an
initial collection.
For platforms that don't have explicit_bzero(), provide various
fallback implementations. (explicit_bzero() itself isn't standard,
but as Linux/glibc, FreeBSD, and OpenBSD have it, it's the most common
spelling, so it makes sense to make that the invocation point.)
Discussion: https://www.postgresql.org/message-id/flat/42d26bde-5d5b-c90d-87ae-6cab875f73be%402ndquadrant.com
Turns out that returning "unrecognized signal" is confusing.
Make it explicit that the platform lacks any support for signal names.
(At least of the machines in the buildfarm, only HPUX lacks it.)
Back-patch to v12 where we invented this function.
Discussion: https://postgr.es/m/3067.1566870481@sss.pgh.pa.us
Prefix inet_net_ntop and sibling routines with "pg_" to ensure that
they aren't mistaken for C-library functions. This fixes warnings
from cpluspluscheck on some platforms, and should help reduce reader
confusion everywhere, since our functions aren't exactly interchangeable
with the library versions (they may have different ideas about address
family codes).
This shouldn't be fixing any actual bugs, unless somebody's linker
is misbehaving, so no need to back-patch.
Discussion: https://postgr.es/m/20518.1559494394@sss.pgh.pa.us
libpq failed to ignore Windows-style newlines in connection service files.
This normally wasn't a problem on Windows itself, because fgets() would
convert \r\n to just \n. But if libpq were running inside a program that
changes the default fopen mode to binary, it would see the \r's and think
they were data. In any case, it's project policy to ignore \r in text
files unconditionally, because people sometimes try to use files with
DOS-style newlines on Unix machines, where the C library won't hide that
from us.
Hence, adjust parseServiceFile() to ignore \r as well as \n at the end of
the line. In HEAD, go a little further and make it ignore all trailing
whitespace, to match what it's always done with leading whitespace.
In HEAD, also run around and fix up everyplace where we have
newline-chomping code to make all those places look consistent and
uniformly drop \r. It is not clear whether any of those changes are
fixing live bugs. Most of the non-cosmetic changes are in places that
are reading popen output, and the jury is still out as to whether popen
on Windows can return \r\n. (The Windows-specific code in pipe_read_line
seems to think so, but our lack of support for this elsewhere suggests
maybe it's not a problem in practice.) Hence, I desisted from applying
those changes to back branches, except in run_ssl_passphrase_command()
which is new enough and little-tested enough that we'd probably not have
heard about any problems there.
Tom Lane and Michael Paquier, per bug #15827 from Jorge Gustavo Rocha.
Back-patch the parseServiceFile() change to all supported branches,
and the run_ssl_passphrase_command() change to v11 where that was added.
Discussion: https://postgr.es/m/15827-e6ba53a3a7ed543c@postgresql.org
This is numbered take 7, and addresses a set of issues around:
- Fixes for typos and incorrect reference names.
- Removal of unneeded comments.
- Removal of unreferenced functions and structures.
- Fixes regarding variable name consistency.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/10bfd4ac-3e7c-40ab-2b2e-355ed15495e8@gmail.com
This is still using the 2.0 version of pg_bsd_indent.
I thought it would be good to commit this separately,
so as to document the differences between 2.0 and 2.1 behavior.
Discussion: https://postgr.es/m/16296.1558103386@sss.pgh.pa.us
We still had a couple of these left in ancient src/port/ files.
Convert them to modern style in preparation for switching to
a version of pg_bsd_indent that doesn't cope well with K&R style.
Discussion: https://postgr.es/m/16886.1558104483@sss.pgh.pa.us
The implementation of readdir() in src/port/ which gets used by MSVC has
been added in 399a36a, and since the beginning it considers all errors
on the first file lookup as ENOENT, setting errno accordingly and
letting the routine caller think that the directory is empty. While
this is normally enough for the case of the backend, this can confuse
callers of this routine on Windows as all errors would map to the same
behavior. So, for example, even permission errors would be thought as
having an empty directory, while there could be contents in it.
This commit changes the error handling so as readdir() gets a behavior
similar to native implementations: force errno=0 when seeing
ERROR_FILE_NOT_FOUND as error and consider other errors as plain
failures.
While looking at the patch, I noticed that MinGW does not enforce
errno=0 when looking at the first file, but it gets enforced on the next
file lookups. A comment related to that was incorrect in the code.
Reported-by: Yuri Kurenkov
Diagnosed-by: Yuri Kurenkov, Grigory Smolkin
Author: Konstantin Knizhnik
Reviewed-by: Andrew Dunstan, Michael Paquier
Discussion: https://postgr.es/m/2cad7829-8d66-e39c-b937-ac825db5203d@postgrespro.ru
Backpatch-through: 9.4
Test for the compiler builtins __builtin_clz, __builtin_ctz, and
__builtin_popcount, and make use of these in preference to
handwritten C code if they're available. Create src/port
infrastructure for "leftmost one", "rightmost one", and "popcount"
so as to centralize these decisions.
On x86_64, __builtin_popcount generally won't make use of the POPCNT
opcode because that's not universally supported yet. Provide code
that checks CPUID and then calls POPCNT via asm() if available.
This requires indirecting through a function pointer, which is
an annoying amount of overhead for a one-instruction operation,
but it's probably not worth working harder than this for our
current use-cases.
I'm not sure we've found all the existing places that could profit
from this new infrastructure; but we at least touched all the
ones that used copied-and-pasted versions of the bitmapset.c code,
and got rid of multiple copies of the associated constant arrays.
While at it, replace c-compiler.m4's one-per-builtin-function
macros with a single one that can handle all the cases we need
to worry about so far. Also, because I'm paranoid, make those
checks into AC_LINK checks rather than just AC_COMPILE; the
former coding failed to verify that libgcc has support for the
builtin, in cases where it's not inline code.
David Rowley, Thomas Munro, Alvaro Herrera, Tom Lane
Discussion: https://postgr.es/m/CAKJS1f9WTAGG1tPeJnD18hiQW5gAk59fQ6WK-vfdAKEHyRg2RA@mail.gmail.com
Deal with silent-underflow errors in float4 for cygwin and mingw by
using our strtof() wrapper; deal with misrounding errors by adding
them to the resultmap. Some slight reorganization of declarations was
done to avoid duplicating material between cygwin.h and win32_port.h.
While here, remove from the resultmap all references to
float8-small-is-zero; inspection of cygwin output suggests it's no
longer required there, and the freebsd/netbsd/openbsd entries should
no longer be necessary (these date back to c. 2000). This commit
doesn't remove the file itself nor the documentation references for
it; that will happen in a subsequent commit if all goes well.
This reverts commits fc6c72747a, 109de05cbb, d0b4663c23 and
711bab1e4d.
Somebody will have to try harder before submitting this patch again.
I've spent entirely too much time on it already, and the #ifdef maze yet
to be written in order for it to build at all got on my nerves. The
amount of work needed to get a platform-specific performance improvement
that's barely above the noise level is not worth it.
Split out these new functions in three parts: one in a new file that
uses the compiler builtin and gets compiled with the -mpopcnt compiler
option if it exists; another one that uses the compiler builtin but not
the compiler option; and finally the fallback with open-coded
algorithms.
Split out the configure logic: in the original commit, it was selecting
to use the -mpopcnt compiler switch together with deciding whether to
use the compiler builtin, but those two things are really separate.
Split them out. Also, expose whether the builtin exists to
Makefile.global, so that src/port's Makefile can decide whether to
compile the hw-optimized file.
Remove CPUID test for CTZ/CLZ. Make pg_{right,left}most_ones use either
the compiler intrinsic or open-coded algo; trying to use the
HW-optimized version is a waste of time. Make them static inline
functions.
Discussion: https://postgr.es/m/20190213221719.GA15976@alvherre.pgsql
We were using uint64 function arguments as "long int" arguments to
compiler builtins, which fails on machines where long ints are 32 bits:
the upper half of the uint64 was being ignored. Fix by using the "ll"
builtin variants instead, which on those machines take 64 bit arguments.
Also, remove configure tests for __builtin_popcountl() (as well as
"long" variants for ctz and clz): the theory here is that any compiler
version will provide all widths or none, so one test suffices. Were
this theory to be wrong, we'd have to add tests for
__builtin_popcountll() and friends, which would be tedious.
Per failures in buildfarm member lapwing and ensuing discussion.
Noah Misch
Tom Lane
Alvaro Herrera
Peter Eisentraut
Michael Paquier
Bruce Momjian
Thomas Munro
Andres Freund
Amit Kapila
Andrew Gierth