pghackers proposal of 8-Nov. All the existing cross-type comparison
operators (int2/int4/int8 and float4/float8) have appropriate support.
The original proposal of storing the right-hand-side datatype as part of
the primary key for pg_amop and pg_amproc got modified a bit in the event;
it is easier to store zero as the 'default' case and only store a nonzero
when the operator is actually cross-type. Along the way, remove the
long-since-defunct bigbox_ops operator class.
Remove the 'strategy map' code, which was a large amount of mechanism
that no longer had any use except reverse-mapping from procedure OID to
strategy number. Passing the strategy number to the index AM in the
first place is simpler and faster.
This is a preliminary step in planned support for cross-datatype index
operations. I'm committing it now since the ScanKeyEntryInitialize()
API change touches quite a lot of files, and I want to commit those
changes before the tree drifts under me.
-References to older versions of PostgreSQL have been removed(It no
longer
compiles against older versions)
-Added a link to PgPerl at GBorg.
Steven Singer
Lars Boegild Thomsen (full email below) and also corrects the regression
expected output for a recent backend message adjustment. Please apply.
Joe Conway
areas are for the lifetime of the backend and in the interests of not breaking
something that's not broken I left alone.
Note for anyone reading this and wanting it for tsearch-v2-stable (i.e. for 7.3
backend) this patch probably will not apply cleanly to that source. It should
be simple enough to see what's going on and apply the changes by hand if need
be.
--
Nigel J. Andrews
The 'word' variable there is initialised from
the prs->words array, but immediately after,
that array may be reallocated, thus leaving
word pointing to unallocated memory.
tests) when using flex 2.5.31. The fix is to *not* try to use palloc
and pfree for allocations within the lexer; when you do that, the
yy_buffer_stack gets freed at inopportune times. The code is already
set up to do manual deallocation, so I see no particular advantage to
using palloc anyway.
This was the last piece of code that took it upon itself to reset the
random number sequence --- now we only have srandom() in postmaster start,
backend start, and explicit setseed() operations.
> patch for pg_autovacuum. This patch assumes that the stats system will
> be fixed so that all inserts, updates and deletes performed on shared
> tables reguardless of what database those commands were executed from,
> will show up in the stats shown in each database.
I had to make a further change to this to take quotes off the 'last
ANALYZE' in order for it to not overquote the relation name, so
there's a _little_ work left to get it to play well.
I have deployed it onto several boxes that should be doing some
vacuuming over the weekend, and it is now certainly hitting pg_
tables.
I would like to present a CVS-oriented patch; unfortunately, I had to
change the indentation patterns when editing some of it :-(. The
following _may_ be good; not sure...
Matthew T. O'Connor
Christopher Browne
> keywords for clarity.
Yeah, this is basically what I meant, sorry I didn't get to it quicker.
However, I tested it out a little and the patch you made doesn't work
because it produces commands like:
VACUUM ANALYZE "public.FooBar"
Which doesn't work, so I made my own patch that creates commands like:
VACUUM ANALYZE "public"."FooBar"
This allows for mixed case schema names as well as tables.
Adam, can you please give this a test as you are the person who caught
the bug in the first place.
Thanks,
Matthew T. O'Connor
ALTER TABLE mytable drop column last_column_of_table;
the timetravel trigger say on UPDATE/DELETE:
ERROR: parser: parse error at end of input
Here is the patch for this bug
B?jthe Zolt?n
getopt_long(). This is more or less the same problem as we saw earlier
with getaddrinfo() and struct addrinfo, and for the same reason: random
user-added libraries might contain the subroutine, but there's no
guarantee we will find the matching header files.
There is an option "-s oldname=newname", which changes the old field name of
the dbf-file to the newname in PostgeSQL. If the length of the new name is 0,
the field is skiped. If you want to skip the first field of the dbf-file,
you get the wildest error-messages from the backend.
dbf2pg load the dbf-file via "COPY tablename FROM STDIN". If you skip the
first field, it is an \t to much in STDIN.
A fix could be an counter j=0, which increments only, if a field is imported
(IF (strlen(fields[h].db_name)> 0) j++. And only if j > 1 (if an other field is
imported) the \t is printed.
An other small bug in the README:
-s start
Specify the first record-number in the xBase-file
we will insert.
should be
-e start
Specify the first record-number in the xBase-file
we will insert.
Thomas Behr
the new timetravel.c,
new timetravel.README (cut from spi/README and modified),
modified timetravel.sql.in
and modified timetravel.example.
Features:
- optionally 3 parameter for insert/update/delete user name
- work with CREATE UNIQUE INDEX ixxx on table xxx
(unique_field,time_off);
(the original version was work with unique index on 6.5.0-6.5.3,
and not work on 7.3.2,7.3.3)
(before 6.5.0 and between 6.5.3 and 7.3.2 I dont know)
- get_timetravel(tablename) function for check timetravel-status.
- timetravel trigger not change oid of the active record. (it is not a
good feature, because the old version is automatice prevent the paralel
update with "where oid=nnn")
B?jthe Zolt?n
>>Sounds like all that's needed for your case. But to be complete, in
>>addition to changing tablefunc.c we'd have to:
>>1) come up with a new function call signature that makes sense and does
>>not cause backward compatibility problems for other people
>>2) make needed changes to tablefunc.sql.in
>>3) adjust the README.tablefunc appropriately
>>4) adjust the regression test for new functionality
>>5) be sure we don't break any of the old cases
>>
>>If you want to submit a complete patch, it would be gratefully accepted
>>-- for review at least ;-)
>
> Here's the patch, at least for steps 1-3
Nabil Sayegh
Joe Conway
- LIKE <subtable> [ INCLUDING DEFAULTS | EXCLUDING DEFAULTS ]
- Quick cleanup of analyze.c function prototypes.
- New non-reserved keywords (INCLUDING, EXCLUDING, DEFAULTS), SQL 200X
Opted not to extend for check constraints at this time.
As per the definition that it's user defined columns, OIDs are NOT
inherited.
Doc and Source patches attached.
--
Rod Taylor <rbt@rbt.ca>
slave
servers. I haven't tested it very well, so use at your own risk (and I
recommend against using it in production).
Basically, I have a central database server that has 4 summary tables
inside
it replicated to a remote slave (these database tables are for my mail
server
authentication, so these are replicated to another server tuned for many
connections, and so I don't have postgres connections opened straight to
my
back-end database server).
Unfortunately, I also wanted to implement a replication database server
for
hot-backups. I realized, too late, that the replication process is
pretty
greedy and will try to replicate all tables marked as a
"MasterAddTable".
To make a long story, I made a patch to RServ.pm and Replicate that
allows you
to specify, on the command line, a list of tables that you want to
replicate...it'll ignore all others.
I haven't finished, since this has to be integrated with CleanLog for
instance, but this should (and does) suffice for the moment.
I have yet to test it with two slaves, but at least my mail server
replication
database now works (it was failing every time it tried to replicate, for
a
variety of reasons).
Anyone have any suggestions on how to improve on this? (or, if someone
more
familiar with this code wants to take the ball and run with it, you're
welcome to).
--
Michael A Nachbaur <mike@nachbaur.com>
- Don't attempt to convert partial or expressional unique indexes
- Don't attempt to convert unique indexes based on a non-default
opclasses
- Untested prevention of conversion of non-btree indexes unique
indexes. Untested as postgresql doesn't allow hash, gist, or rtree
based indexes to be unique.
rbt=# create unique index t on a using hash (col);
ERROR: DefineIndex: access method "hash" does not support UNIQUE
indexes
rbt=# create unique index t on a using gist (col);
ERROR: DefineIndex: access method "gist" does not support UNIQUE
indexes
rbt=# select version();
version
------------------------------------------------------------------------
PostgreSQL 7.4devel on i386-unknown-freebsd4.8, compiled by GCC 2.95.4
Rod Taylor
> Second argument to metaphone is suposed to set the limit on the
> number of characters to return, but it breaks on some phrases:
>
> usps=# select metaphone(a,3),metaphone(a,4),metaphone(a,20) from
> (select 'Hello world'::varchar AS a) a;
> HLW | HLWR | HLWRLT
>
> usps=# select metaphone(a,3),metaphone(a,4),metaphone(a,20) from
> (select 'A A COMEAUX MEMORIAL'::varchar AS a) a;
> AKM | AKMKS | AKMKSMMRL
>
> In every case I've found that does this, the 4th and 5th letters are
> always 'KS'.
Nice catch.
There was a bug in the original metaphone algorithm from CPAN. Patch
attached (while I was at it I updated my email address, changed the
copyright to PGDG, and removed an unnecessary palloc). Here's how it
looks now:
regression=# select metaphone(a,4) from (select 'A A COMEAUX
MEMORIAL'::varchar AS a) a;
metaphone
-----------
AKMK
(1 row)
regression=# select metaphone(a,5) from (select 'A A COMEAUX
MEMORIAL'::varchar AS a) a;
metaphone
-----------
AKMKS
(1 row)
Joe Conway
* A few bug fixes
* fixes solaris compile and crash issue
* decouple vacuum analyze and analyze thresholds
* detach from tty (dameonize)
* improved logging layout
* more conservative default configuration
* improved, expanded and updated README
please apply and 1st convenience, or before code freeze which ever comes
first :-)
At this point I think I have brought pg_autovacuum and its client side
design as far as I think it should go. It works, keeping file sizes in
check, helps performance and give the administrator a fair amount
flexibility in configuring it.
Next up is to do the FSM based design that is integrated into the back
end.
p.s. Thanks to Christopher Browne for his help.
Matthew T. O'Connor
PostgreSQL Daemon
Teodor Sigaev
Joe Conway
Tatsuo Ishii
Tom Lane
Bruce Momjian
Jan Wieck
Peter Eisentraut