When triggers are cloned from partitioned tables to their partitions,
the 'tgenabled' flag (origin/replica/always/disable) was not propagated.
Make it so that the flag on the trigger on partition is initially set to
the same value as on the partitioned table.
Add a test case to verify the behavior.
Backpatch to 11, where this appeared in commit 86f575948c.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reported-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/20200930223450.GA14848@telsasoft.com
When some slots are invalidated due to the max_slot_wal_keep_size limit,
the old segment horizon should move forward to stay within the limit.
However, in commit c655077639 we forgot to call KeepLogSeg again to
recompute the horizon after invalidating replication slots. In cases
where other slots remained, the limits would be recomputed eventually
for other reasons, but if all slots were invalidated, the limits would
not move at all afterwards. Repair.
Backpatch to 13 where the feature was introduced.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reported-by: Marcin Krupowicz <mk@071.ovh>
Discussion: https://postgr.es/m/17103-004130e8f27782c9@postgresql.org
As reported by buildfarm member bowerbird, those tests are unstable on
Windows. The failure produced there points to a problem with gzflush(),
that fails to sync a file freshly-opened, with a gzFile properly
opened. While testing this myself with MSVC, I bumped into a different
error where a file could simply not be opened, so this makes me rather
doubtful that testing this area on Windows is a good idea if this
finishes with random concurrency failures. This requires more
investigation, and keeping this buildfarm member red is not a good thing
in the long-term, so for now this just disables this set of tests on
Windows.
Discussion: https://postgr.es/m/YPDLz2x3o1aX2wRh@paquier.xyz
Ensure to properly mark up function parameters in text with <parameter>,
avoid using <acronym> for terms which aren't acronyms and properly place
the ", and" in a value list. The acronym removal is a follow-up to commit
fb72a7b8c3 which removed it for minmax-multi. In passing, also fix an
incorrectly cased word.
Author: Ekaterina Kiryanova <e.kiryanova@postgrespro.ru>
Reviewed-by: Laurenz Albe <laurenz.albe@cybertec.at>
Discussion: https://postgr.es/m/c050ecbc-80b2-b360-3c1d-9fe6a6a11bb5@postgrespro.ru
Backpatch-through: v14
As of v14, pg_depend contains almost 7000 "pin" entries recording
the OIDs of built-in objects. This is a fair amount of bloat for
every database, and it adds time to pg_depend lookups as well as
initdb. We can get rid of all of those entries in favor of an OID
range check, i.e. "OIDs below FirstUnpinnedObjectId are pinned".
(template1 and the public schema are exceptions. Those exceptions
are now wired into IsPinnedObject() instead of initdb's code for
filling pg_depend, but it's the same amount of cruft either way.)
The contents of pg_shdepend are modified likewise.
Discussion: https://postgr.es/m/3737988.1618451008@sss.pgh.pa.us
Autoconf's AC_CHECK_DECLS() always defines HAVE_DECL_whatever
as 1 or 0, but some of the entries in msvc/Solution.pm showed
such symbols as "undef" instead of 0. Fix that for consistency.
There's no live bug in current usages AFAICS, but it's not hard
to imagine one creeping in if more-complex #if tests get added.
Back-patch to v13, which is as far back as Solution.pm contains
this data. The inconsistency still exists in the manually-filled
pg_config_ext.h.win32 files of older branches; but as long as the
problem is only latent, it doesn't seem worth the trouble to
clean things up there.
Discussion: https://postgr.es/m/3185430.1626133592@sss.pgh.pa.us
The OpenBSD implementation of gzip considers only files suffixed by "Z",
"gz", "z", "tgz" or "taz" as valid targets, discarding anything else and
making a command using --test exit with an error code of 512 if anything
invalid is found. The test introduced in ffc9dda tested a WAL segment
suffixed as .gz.partial, enough to make the test fail.
Testing only a full segment is fine enough in terms of coverage, so
simplify the code by discarding the .gz.partial segment in this check.
This should be enough to make the test pass with OpenBSD environments.
Per report from curculio.
Discussion: https://postgr.es/m/YPAdf9r5aJbDoHoq@paquier.xyz
This commit fixes the description of a couple of multirange operators and
oprjoin for another multirange operator. The change of oprjoin is more
cosmetic since both old and new functions return the same constant.
These cosmetic changes don't worth catalog incompatibility between 14beta2
and 14beta3. So, catversion isn't bumped.
Discussion: https://postgr.es/m/CAPpHfdv9OZEuZDqOQoUKpXhq%3Dmc-qa4gKCPmcgG5Vvesu7%3Ds1w%40mail.gmail.com
Backpatch-throgh: 14
When reporting "conflicting or redundant options" errors, try to
ensure that errposition() is used, to help the user identify the
offending option.
Formerly, errposition() was invoked in less than 60% of cases. This
patch raises that to over 90%, but there remain a few places where the
ParseState is not readily available. Using errdetail() might improve
the error in such cases, but that is left as a task for the future.
Additionally, since this error is thrown from over 100 places in the
codebase, introduce a dedicated function to throw it, reducing code
duplication.
Extracted from a slightly larger patch by Vignesh C. Reviewed by
Bharath Rupireddy, Alvaro Herrera, Dilip Kumar, Hou Zhijie, Peter
Smith, Daniel Gustafsson, Julien Rouhaud and me.
Discussion: https://postgr.es/m/CALDaNm33FFSS5tVyvmkoK2cCMuDVxcui=gFrjti9ROfynqSAGA@mail.gmail.com
There is a non-trivial amount of code that handles ZLIB compression in
pg_receivewal, from basics like the format name, the calculation of the
start streaming position and of course the compression itself, but there
was no automated coverage for it.
This commit introduces a set of conditional tests (if the build supports
ZLIB) to cover the creation of ZLIB-compressed WAL segments, the
handling of the partial, compressed, WAL segments and the compression
operation in itself. Note that there is an extra phase checking the
validity of the generated files by using directly a gzip command, passed
down by the Makefile of pg_receivewal. This part is skipped if the
command cannot be found, something likely going to happen on Windows
with MSVC except if one sets the variable GZIP_PROGRAM in the
environment of the test.
This set of tests will become handy for upcoming patches that add more
options for the compression methods used by pg_receivewal, like LZ4, to
make sure that no existing facilities are broken.
Author: Georgios Kokolatos
Reviewed-by: Gilles Darold, Michael Paquier
Discussion: https://postgr.es/m/07BK3Mk5aEOsTwGaY77qBVyf9GjoEzn8TMgHLyPGfEFPIpTEmoQuP2P4c7teesjSg-LPeUafsp1flnPeQYINMSMB_UpggJDoduB5EDYBqaQ=@protonmail.com
Build farm animals running ancient HPUX and Solaris have a non-standard
sigwait() from draft versions of POSIX, so they didn't like commit
7c09d279. To avoid the problem in general, only try to use sigwait() if
it's declared by <signal.h> and matches the expected declaration. To
select the modern declaration on Solaris (even in non-threaded
programs), move -D_POSIX_PTHREAD_SEMANTICS into the right place to
affect all translation units.
Also fix the error checking. Modern sigwait() doesn't set errno.
Thanks to Tom Lane for help with this.
Discussion: https://postgr.es/m/3187588.1626136248%40sss.pgh.pa.us
This allows Param substitution to produce just the same result
as writing a constant value literally would have done. While
it hardly matters so far as the current core code is concerned,
extensions might take more interest in node location fields.
Julien Rouhaud
Discussion: https://postgr.es/m/20170311220932.GJ15188@nol.local
Commit 0563a3a8b changed how partition constraints were generated such
that this function no longer computes the mapping of parent attnos to
child attnos.
This is an external function that extensions could use, so this is
potentially a breaking change. No external callers are known, however,
and this will make it simpler to write such callers in the future.
Author: Hou Zhijie
Reviewed-by: David Rowley, Michael Paquier, Soumyadeep Chakraborty
Discussion: https://www.postgresql.org/message-id/flat/OS0PR01MB5716A75A45BE46101A1B489894379@OS0PR01MB5716.jpnprd01.prod.outlook.com
Previously, we would send each line as a separate CopyData message.
That's pretty wasteful if the table is narrow, as each CopyData message
has 5 bytes of overhead. For efficiency, buffer up and pack 8 kB of
input data into each CopyData message.
The server also sends each line as a separate CopyData message in COPY TO
STDOUT, and that's similarly wasteful. But that's documented in the FE/BE
protocol description, so changing that would be a wire protocol break.
Reviewed-by: Aleksander Alekseev
Discussion: https://www.postgresql.org/message-id/40b2cec0-d0fb-3191-2ae1-9a3fe16a7e48%40iki.fi
To add support for streaming transactions at prepare time into the
built-in logical replication, we need to do the following things:
* Modify the output plugin (pgoutput) to implement the new two-phase API
callbacks, by leveraging the extended replication protocol.
* Modify the replication apply worker, to properly handle two-phase
transactions by replaying them on prepare.
* Add a new SUBSCRIPTION option "two_phase" to allow users to enable
two-phase transactions. We enable the two_phase once the initial data sync
is over.
We however must explicitly disable replication of two-phase transactions
during replication slot creation, even if the plugin supports it. We
don't need to replicate the changes accumulated during this phase,
and moreover, we don't have a replication connection open so we don't know
where to send the data anyway.
The streaming option is not allowed with this new two_phase option. This
can be done as a separate patch.
We don't allow to toggle two_phase option of a subscription because it can
lead to an inconsistent replica. For the same reason, we don't allow to
refresh the publication once the two_phase is enabled for a subscription
unless copy_data option is false.
Author: Peter Smith, Ajin Cherian and Amit Kapila based on previous work by Nikhil Sontakke and Stas Kelvich
Reviewed-by: Amit Kapila, Sawada Masahiko, Vignesh C, Dilip Kumar, Takamichi Osumi, Greg Nancarrow
Tested-By: Haiying Tang
Discussion: https://postgr.es/m/02DA5F5E-CECE-4D9C-8B4B-418077E2C010@postgrespro.ru
Discussion: https://postgr.es/m/CAA4eK1+opiV4aFTmWWUF9h_32=HfPOW9vZASHarT0UA5oBrtGw@mail.gmail.com
The internals of the frontend-side callbacks for SASL are visible in
libpq-int.h, but the header was not getting installed. This would cause
compilation failures for applications playing with the internals of
libpq.
Issue introduced in 9fd8557.
Author: Mikhail Kulagin
Reviewed-by: Jacob Champion
Discussion: https://postgr.es/m/05ce01d777cb$40f31d60$c2d95820$@postgrespro.ru
"Result Cache" was never a great name for this node, but nobody managed
to come up with another name that anyone liked enough. That was until
David Johnston mentioned "Node Memoization", which Tom Lane revised to
just "Memoize". People seem to like "Memoize", so let's do the rename.
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/20210708165145.GG1176@momjian.us
Backpatch-through: 14, where Result Cache was introduced
There's no point in checking if an INT8 sequence has a seqmin and seqmax
value is outside the range of the minimum and maximum values for an int64
type. These both use the same underlying types so an INT8 certainly
cannot be outside the minimum and maximum values supported by int64.
This code is fairly harmless and it seems likely that most compilers
would optimize it out anyway, never-the-less, let's remove it replacing
it with a small comment to mention why the check is not needed.
Author: Greg Nancarrow, with the comment revised by David Rowley
Discussion: https://postgr.es/m/CAJcOf-c9KBUZ8ow_6e%3DWSfbbEyTKfqV%3DVwoFuODQVYMySHtusw%40mail.gmail.com
41469253e went to the trouble of removing a theoretical bug from
free_sort_tuple by checking if the tuple was NULL before freeing it. Let's
make this a little more robust by also setting the tuple to NULL so that
should we be called again we won't end up doing a pfree on the already
pfree'd tuple. Per advice from Tom Lane.
Discussion: https://postgr.es/m/3188192.1626136953@sss.pgh.pa.us
Backpatch-through: 9.6, same as 41469253e
This fixes a theoretical bug in tuplesort.c which, if a bounded sort was
used in combination with a byval Datum sort (tuplesort_begin_datum), when
switching the sort to a bounded heap in make_bounded_heap(), we'd call
free_sort_tuple(). The problem was that when sorting Datums of a byval
type, the tuple is NULL and free_sort_tuple() would free the memory for it
regardless of that. This would result in a crash.
Here we fix that simply by adding a check to see if the tuple is NULL
before trying to disassociate and free any memory belonging to it.
The reason this bug is only theoretical is that nowhere in the current
code base do we do tuplesort_set_bound() when performing a Datum sort.
However, let's backpatch a fix for this as if any extension uses the code
in this way then it's likely to cause problems.
Author: Ronan Dunklau
Discussion: https://postgr.es/m/CAApHDvpdoqNC5FjDb3KUTSMs5dg6f+XxH4Bg_dVcLi8UYAG3EQ@mail.gmail.com
Backpatch-through: 9.6, oldest supported version
Allow a pager to be used by the \watch command. This works but isn't
very useful with traditional pagers like "less", so use a different
environment variable. The popular open source tool "pspg" (also by
Pavel) knows how to display the output if you set PSQL_WATCH_PAGER="pspg
--stream".
To make \watch react quickly when the user quits the pager or presses
^C, and also to increase the accuracy of its timing and decrease the
rate of useless context switches, change the main loop of the \watch
command to use sigwait() rather than a sleeping/polling loop, on Unix.
Supported on Unix only for now (like pspg).
Author: Pavel Stehule <pavel.stehule@gmail.com>
Author: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/CAFj8pRBfzUUPz-3gN5oAzto9SDuRSq-TQPfXU_P6h0L7hO%2BEhg%40mail.gmail.com
Apple's mechanism for dealing with functions that are available
in only some OS versions confuses AC_CHECK_FUNCS, and therefore
AC_REPLACE_FUNCS. We can use AC_CHECK_DECLS instead, so long as
we enable -Werror=unguarded-availability-new. This allows people
compiling for macOS to control whether or not preadv/pwritev are
used by setting MACOSX_DEPLOYMENT_TARGET, rather than supplying
a back-rev SDK. (Of course, the latter still works, too.)
James Hilliard
Discussion: https://postgr.es/m/20210122193230.25295-1-james.hilliard1@gmail.com
The idea behind this patch is to design out bugs like the one fixed
by commit 9d523119f. Previously, once one did RelationOpenSmgr(rel),
it was considered okay to access rel->rd_smgr directly for some
not-very-clear interval. But since that pointer will be cleared by
relcache flushes, we had bugs arising from overreliance on a previous
RelationOpenSmgr call still being effective.
Now, very little code except that in rel.h and relcache.c should ever
touch the rd_smgr field directly. The normal coding rule is to use
RelationGetSmgr(rel) and not expect the result to be valid for longer
than one smgr function call. There are a couple of places where using
the function every single time seemed like overkill, but they are now
annotated with large warning comments.
Amul Sul, after an idea of mine.
Discussion: https://postgr.es/m/CANiYTQsU7yMFpQYnv=BrcRVqK_3U3mtAzAsJCaqtzsDHfsUbdQ@mail.gmail.com
This should have been removed in commit 7e30c186da, which split the loop
into two. Only the first loop uses the 'from' variable; updating it in
the second loop is bogus. It was never read after the first loop, so this
was harmless and surely optimized away by the compiler, but let's be tidy.
Backpatch to all supported versions.
Author: Ranier Vilela
Discussion: https://www.postgresql.org/message-id/CAEudQAoWq%2BAL3BnELHu7gms2GN07k-np6yLbukGaxJ1vY-zeiQ%40mail.gmail.com
This reverts commit 54fb8c7, as per the issues reported by fairywren
when it comes to MinGW because of the lack of microsoft_native_stat()
there. Using just stat() for MSVC is not sufficient to take care of the
concurrency problems with files pending on deletion. It may be possible
to paint some __MINGW64__ in the code to switch to a different
implementation of stat() in this build context, but I am not sure either
if relying on the implementation of stat() in MinGW to take care of the
problems we are trying to fix is enough or not. So this needs more
study.
Discussion: https://postgr.es/m/YOvOlfRrIO0yGtgw@paquier.xyz
Backpatch-through: 14
The code introduced by bed9075 to enhance the stat() implementation on
Windows for file sizes larger than 4GB fails to properly detect files
pending for deletion with its method based on NtQueryInformationFile()
or GetFileInformationByHandleEx(), as proved by Alexander Lakhin in a
custom TAP test of his own.
The method used in the implementation of open() to sleep and loop when
when failing on ERROR_ACCESS_DENIED (EACCES) is showing much more
stability, so switch to this method. This could still lead to issues if
the permission problem stays around for much longer than the timeout of
1 second used, but that should (hopefully) never happen in
performance-critical paths. Still, there could be a point in increasing
the timeouts for the sake of machines that handle heavy loads.
Note that WIN32's open() now uses microsoft_native_stat() as it should
be similar to stat() when working around issues with concurrent file
deletions.
I have spent some time testing this patch with pgbench in combination
of the SQL functions from genfile.c, as well as running the TAP test
provided on the thread with MSVC builds, and this looks much more
stable than the previous method.
Author: Alexander Lakhin
Reviewed-by: Tom Lane, Michael Paquier, Justin Pryzby
Discussion: https://postgr.es/m/c3427edf-d7c0-ff57-90f6-b5de3bb62709@gmail.com
Backpatch-through: 14
ld_upper, ld_lower, pd_special and the page size have been using
smallint as return type, which could cause those fields to return
negative values in certain cases for builds configures with a page size
of 32kB.
Bump pageinspect to 1.10. page_header() is able to handle the correct
return type of those fields at runtime when using an older version of
the extension, with some tests are added to cover that.
Author: Quan Zongliang
Reviewed-by: Michael Paquier, Bharath Rupireddy
Discussion: https://postgr.es/m/8b8ec36e-61fe-14f9-005d-07bc85aa4eed@yeah.net
Although we were careful to lock the object being added or dropped,
we failed to get any sort of lock on the extension itself. This
allowed the ALTER to proceed in parallel with a DROP EXTENSION,
which is problematic for a couple of reasons. If both commands
succeeded we'd be left with a dangling link in pg_depend, which
would cause problems later. Also, if the ALTER failed for some
reason, it might try to print the extension's name, and that could
result in a crash or (in older branches) a silly error message
complaining about extension "(null)".
Per bug #17098 from Alexander Lakhin. Back-patch to all
supported branches.
Discussion: https://postgr.es/m/17098-b960f3616c861f83@postgresql.org
Commit 547f04e changed pgbench to use microsecond accounting, but
introduced a couple of logging and aggregation bugs:
1. We print Unix epoch timestamps so that you can correlate them with
other logs, but these were inadvertently changed to use a
system-dependent reference epoch. Compute Unix timestamps, and begin
aggregation intervals on the boundaries of whole Unix epoch seconds, as
before.
2. The user-supplied aggregation interval needed to be scaled.
Back-patch to 14.
Author: Fabien COELHO <coelho@cri.ensmp.fr>
Author: Yugo NAGATA <nagata@sraoss.co.jp>
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reported-by: YoungHwan Joo <rulyox@gmail.com>
Reported-by: Gregory Smith <gregsmithpgsql@gmail.com>
Discussion: https://postgr.es/m/CAF7igB1r6wRfSCEAB-iZBKxkowWY6%2BdFF2jObSdd9%2BiVK%2BvHJg%40mail.gmail.com
Discussion: https://postgr.es/m/CAHLJuCW_8Vpcr0%3Dt6O_gozrg3wXXWXZXDioYJd3NhvKriqgpfQ%40mail.gmail.com
If an error occurred in the wrong place, it was possible to leave an
unintialized entry in the hash table, leading to a crash. Fixed.
Also, be more careful about the order of operations so that an
allocation error doesn't leak memory in CacheMemoryContext or
unnecessarily advance NextRecordTypmod.
Backpatch through version 11. Earlier versions (prior to 35ea75632a)
do not exhibit the problem, because an uninitialized hash entry
contains a valid empty list.
Author: Sait Talha Nisanci <Sait.Nisanci@microsoft.com>
Reviewed-by: Andres Freund
Discussion: https://postgr.es/m/HE1PR8303MB009069D476225B9A9E194B8891779@HE1PR8303MB0090.EURPRD83.prod.outlook.com
Backpatch-through: 11
Sigh ... I was expecting AC_CHECK_LIB to do something it didn't,
namely update LIBS. This led to not finding ldap_initialize.
Fix by moving the probe for ldap_initialize. In some sense this
is more correct anyway, since (at least for now) we care about
whether ldap_initialize exists in libldap not libldap_r.
Per buildfarm member elver and local testing.
Discussion: https://postgr.es/m/17083-a19190d9591946a7@postgresql.org
The following checks are added, to make the SASL infrastructure more
aware of defects when implementing new mechanisms:
- Detect that no output is generated by a mechanism if an exchange fails
in the backend, failing if there is a message waiting to be sent.
- Handle zero-length messages in the frontend. The backend handles that
already, and SCRAM would complain if sending empty messages as this is
not authorized for this mechanism, but other mechanisms may want this
capability (the SASL specification allows that).
- Make sure that a mechanism generates a message in the middle of the
exchange in the frontend.
SCRAM, as implemented, respects all these requirements already, and the
recent refactoring of SASL done in 9fd8557 helps in documenting that in
a cleaner way.
Analyzed-by: Jacob Champion
Author: Michael Paquier
Reviewed-by: Jacob Champion
Discussion: https://postgr.es/m/3d2a6f5d50e741117d6baf83eb67ebf1a8a35a11.camel@vmware.com
This fixes an overflow error when using the numeric * operator if the
result has more than 16383 digits after the decimal point by rounding
the result. Overflow errors should only occur if the result has too
many digits *before* the decimal point.
Discussion: https://postgr.es/m/CAEZATCUmeFWCrq2dNzZpRj5+6LfN85jYiDoqm+ucSXhb9U2TbA@mail.gmail.com
I incorrectly diagnosed the reason why hoverfly is unhappy.
Looking closer, it appears that it fails to link libldap
unless libssl is also present; so the problem was my
idea of clearing LIBS before making the check. Revert
to essentially the original coding, except that instead
of failing when libldap_r isn't there, use libldap.
Per buildfarm member hoverfly.
Discussion: https://postgr.es/m/17083-a19190d9591946a7@postgresql.org
When sending queries in pipeline mode, we were careless about leaving
the connection in the right state so that PQgetResult would behave
correctly; trying to read further results after sending a query after
having read a result with an error would sometimes hang. Fix by
ensuring internal libpq state is changed properly. All the state
changes were being done by the callers of pqAppendCmdQueueEntry(); it
would have become too repetitious to have this logic in each of them, so
instead put it all in that function and relieve callers of the
responsibility.
Add a test to verify this case. Without the code fix, this new test
hangs sometimes.
Also, document that PQisBusy() would return false when no queries are
pending result. This is not intuitively obvious, and NULL would be
obtained by calling PQgetResult() at that point, which is confusing.
Wording by Boris Kolpackov.
In passing, fix bogus use of "false" to mean "0", per Ranier Vilela.
Backpatch to 14.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reported-by: Boris Kolpackov <boris@codesynthesis.com>
Discussion: https://postgr.es/m/boris.20210624103805@codesynthesis.com
The requirement that IDENTIFY_SYSTEM be run before START_REPLICATION
was both undocumented and unnecessary. Remove the error and ensure
that ThisTimeLineID is initialized in START_REPLICATION.
Elect not to backport because this requirement was expected behavior
(even if inconsistently enforced), and is not likely to cause any
major problem.
Author: Jeff Davis
Reviewed-by: Andres Freund
Discussion: https://postgr.es/m/de4bbf05b7cd94227841c433ea6ff71d2130c713.camel%40j-davis.com
In commit d0a02bdb8, I'd supposed that uniformly probing for
ldap_bind would make the intent clearer. However, that seems
not to work on AIX, for obscure reasons (maybe it's a macro
there?). Revert to the former behavior of probing
ldap_simple_bind for thread-safe cases and ldap_bind otherwise.
Per buildfarm member hoverfly.
Discussion: https://postgr.es/m/17083-a19190d9591946a7@postgresql.org
Commit 7266d0997 added code to pull up simple constant function
results, converting the RTE_FUNCTION RTE to a dummy RTE_RESULT
RTE since it no longer need be scanned. But I forgot to clear
the LATERAL flag if the RTE has it set. If the function reduced
to a constant, it surely contains no lateral references so this
simplification is logically OK. It's needed because various other
places will Assert that RESULT RTEs aren't LATERAL.
Per bug #17097 from Yaoguang Chen. Back-patch to v13 where the
faulty code came in.
Discussion: https://postgr.es/m/17097-3372ef9f798fc94f@postgresql.org
The separate libldap_r is gone and libldap itself is now always
thread-safe. Unfortunately there seems no easy way to tell by
inspection whether libldap is thread-safe, so we have to take
it on faith that libldap is thread-safe if there's no libldap_r.
That should be okay, as it appears that libldap_r was a standard
part of the installation going back at least 20 years.
Report and patch by Adrian Ho. Back-patch to all supported
branches, since people might try to build any of them with
a newer OpenLDAP.
Discussion: https://postgr.es/m/17083-a19190d9591946a7@postgresql.org
Since the executor can't cope with a utility statement appearing
as a node of a plan tree, we can't support cases where a rewrite
rule inserts a NOTIFY into an INSERT/UPDATE/DELETE command appearing
in a WITH clause of a larger query. (One can imagine ways around
that, but it'd be a new feature not a bug fix, and so far there's
been no demand for it.) RewriteQuery checked for this, but it
missed the case where the DML command rewrites to *only* a NOTIFY.
That'd lead to crashes later on in planning. Add the missed check,
and improve the level of testing of this area.
Per bug #17094 from Yaoguang Chen. It's been busted since WITH
was introduced, so back-patch to all supported branches.
Discussion: https://postgr.es/m/17094-bf15dff55eaf2e28@postgresql.org
There was talk about adding units all the way up to yottabytes but it
seems quite far-fetched that anyone would need those. Since such large
units are not exactly commonplace, it seems unlikely that having
pg_size_pretty outputting unit any larger than petabytes would actually be
helpful to anyone.
Since petabytes are on the horizon, let's just add those only. Maybe one
day we'll get to add additional units, but it will likely be a while
before we'll need to think beyond petabytes in regards to the size of a
database.
Author: David Christensen
Discussion: https://postgr.es/m/CAOxo6XKmHc_WZip-x5QwaOqFEiCq_SVD0B7sbTZQk+qqcn2qaw@mail.gmail.com