A permutation that specifies more steps than defined causes
isolationtester to crash, so avoid that. Using less steps than defined
should probably not be a problem, but no spec currently does that.
constructed before acquiring WALInsertLock, which slightly reduces the time
the lock is held. Although I could not measure any benefit in benchmarks,
the code is more readable this way.
Teach pg_basebackup in streaming mode to deal with keepalive messages.
Also change the order of checks to complain at the message rather than
block size when a new message is introduced.
In passing, switch to using sizeof() instead of hardcoded sizes for
WAL protocol structs.
The original implementation of this interpreted it as a kind of
"inheritance" facility and named all the internal structures
accordingly. This turned out to be very confusing, because it has
nothing to do with the INHERITS feature. So rename all the internal
parser infrastructure, update the comments, adjust the error messages,
and split up the regression tests.
Historically we've used the SWPB instruction for TAS() on ARM, but this
is deprecated and not available on ARMv6 and later. Instead, make use
of a GCC builtin if available. We'll still fall back to SWPB if not,
so as not to break existing ports using older GCC versions.
Eventually we might want to try using __sync_lock_test_and_set() on some
other architectures too, but for now that seems to present only risk and
not reward.
Back-patch to all supported versions, since people might want to use any
of them on more recent ARM chips.
Martin Pitt
This squeezes out a bunch of alignment padding, reducing the size
from 72 to 56 bytes on my machine. At least in my testing, this
didn't produce any measurable performance improvement, but the space
savings seem like enough justification.
Andres Freund
ALTER TABLE (and ALTER VIEW, ALTER SEQUENCE, etc.) now use a
RangeVarGetRelid callback to check permissions before acquiring a table
lock. We also now use the same callback for all forms of ALTER TABLE,
rather than having separate, almost-identical callbacks for ALTER TABLE
.. SET SCHEMA and ALTER TABLE .. RENAME, and no callback at all for
everything else.
I went ahead and changed the code so that no form of ALTER TABLE works
on foreign tables; you must use ALTER FOREIGN TABLE instead. In 9.1,
it was possible to use ALTER TABLE .. SET SCHEMA or ALTER TABLE ..
RENAME on a foreign table, but not any other form of ALTER TABLE, which
did not seem terribly useful or consistent.
Patch by me; review by Noah Misch.
Previously, this was hardcoded: we always had 8. Performance testing
shows that isn't enough, especially on big SMP systems, so we allow it
to scale up as high as 32 when there's adequate memory. On the flip
side, when shared_buffers is very small, drop the number of CLOG buffers
down to as little as 4, so that we can start the postmaster even
when very little shared memory is available.
Per extensive discussion with Simon Riggs, Tom Lane, and others on
pgsql-hackers.
In commit 6545a901aa, I removed the mini SQL
lexer that was in pg_backup_db.c, thinking that it had no real purpose
beyond separating COPY data from SQL commands, which purpose had been
obsoleted by long-ago fixes in pg_dump's archive file format.
Unfortunately this was in error: that code was also used to identify
command boundaries in INSERT-style table data, which is run together as a
single string in the archive file for better compressibility. As a result,
direct-to-database restores from archive files made with --inserts or
--column-inserts fail in our latest releases, as reported by Dick Visser.
To fix, restore the mini SQL lexer, but simplify it by adjusting the
calling logic so that it's only required to cope with INSERT-style table
data, not arbitrary SQL commands. This allows us to not have to deal with
SQL comments, E'' strings, or dollar-quoted strings, none of which have
ever been emitted by dumpTableData_insert.
Also, fix the lexer to cope with standard-conforming strings, which was the
actual bug that the previous patch was meant to solve.
Back-patch to all supported branches. The previous patch went back to 8.2,
which unfortunately means that the EOL release of 8.2 contains this bug,
but I don't think we're doing another 8.2 release just because of that.
As noted by Heikki Linnakangas, the previous coding confused the "flags"
variable with the "mask" variable. The affect of this appears to be that
unlogged buffers would get written out at every checkpoint rather than
only at shutdown time. Although that's arguably an acceptable failure
mode, I'm back-patching this change, since it seems like a poor idea to
rely on this happening to work.
pg_dump sorts operators by name, but operators with the same name come
out in random order. Now operators with the same name are dumped in
the order prefix, postfix, infix. (This is consistent with functions,
which are dumped in increasing number of argument order.)
ALTER DOMAIN / DROP CONSTRAINT on a nonexistent constraint name did
not report any error. Now it reports an error. The IF EXISTS option
was added to get the usual behavior of ignoring nonexistent objects to
drop.
Certain things like typeglobs or readonly things like $^V cause
perl's SvPVutf8() to die nastily and crash the backend. To avoid
that bug we make a copy of the object, which will subsequently be
garbage collected.
Back patched to 9.1 where we first started using SvPVutf8().
Per -hackers discussion. Original problem reported by David Wheeler.
As previously coded, the QueryDesc's dest pointer was left dangling
(pointing at an already-freed receiver object) after ExecutorEnd. It's a
bit astonishing that it took us this long to notice, and I'm not sure that
the known problem case with SQL functions is the only one. Fix it by
saving and restoring the original receiver pointer, which seems the most
bulletproof way of ensuring any related bugs are also covered.
Per bug #6379 from Paul Ramsey. Back-patch to 8.4 where the current
handling of SELECT INTO was introduced.
Further testing convinces me that this is helpful at sufficiently high
contention levels, though it's still worrisome that it loses slightly
at lower contention levels.
Per Manabu Ori.
Because coerce_type recurses into the argument of a CollateExpr,
coerce_to_target_type's longstanding code for detecting whether coerce_type
had actually done anything (to wit, returned a different node than it
passed in) was broken in 9.1. This resulted in unexpected failures in
hide_coercion_node; which was not the latter's fault, since it's critical
that we never call it on anything that wasn't inserted by coerce_type.
(Else we might decide to "hide" a user-written function call.)
Fix by removing and replacing the CollateExpr in coerce_to_target_type
itself. This is all pretty ugly but I don't immediately see a way to make
it nicer.
Per report from Jean-Yves F. Barbier.
This is allegedly a win, at least on some PPC implementations, according
to the PPC ISA documents. However, as with LWARX hints, some PPC
platforms give an illegal-instruction failure. Use the same trick as
before of assuming that PPC64 platforms will accept it; we might need to
refine that based on experience, but there are other projects doing
likewise according to google.
I did not add an assembler compatibility test because LWSYNC has been
around much longer than hint bits, and it seems unlikely that any
toolchains currently in use don't recognize it.
Previously we defined slock_t as 8 bytes on PPC64, but the TAS assembly
code uses word-wide operations regardless, so that the second word was
just wasted space. There doesn't appear to be any performance benefit
in adding the second word, so get rid of it to simplify the code.
The hint bit makes for a small but measurable performance improvement
in access to contended spinlocks.
On the other hand, some PPC chips give an illegal-instruction failure.
There doesn't seem to be a completely bulletproof way to tell whether the
hint bit will cause an illegal-instruction failure other than by trying
it; but most if not all 64-bit PPC machines should accept it, so follow
the Linux kernel's lead and assume it's okay to use it in 64-bit builds.
Of course we must also check whether the assembler accepts the command,
since even with a recent CPU the toolchain could be old.
Patch by Manabu Ori, significantly modified by me.
This reverts commit ff68b256a5.
The recent change to use -fexcess-precision=standard should make those
Asserts safe, and does fix a test case that formerly crashed for me,
so I think there's no need to have a cross-version difference in the
code here.
The original test cases gave varying results depending on whether the
locale sorts digits before or after letters. Since that's not really
what we wish to test here, adjust the test data to not contain any strings
beginning with digits. Per report from Pavel Stehule.
All supported platforms support the C89 standard function atexit()
(SunOS 4 probably being the last one not to), and supporting both
makes the code clumsy.
In commit e2c2c2e8b1 I made use of nested
list structures to show which clauses went with which index columns, but
on reflection that's a data structure that only an old-line Lisp hacker
could love. Worse, it adds unnecessary complication to the many places
that don't much care which clauses go with which index columns. Revert
to the previous arrangement of flat lists of clauses, and instead add a
parallel integer list of column numbers. The places that care about the
pairing can chase both lists with forboth(), while the places that don't
care just examine one list the same as before.
The only real downside to this is that there are now two more lists that
need to be passed to amcostestimate functions in case they care about
column matching (which btcostestimate does, so not passing the info is not
an option). Rather than deal with 11-argument amcostestimate functions,
pass just the IndexPath and expect the functions to extract fields from it.
That gets us down to 7 arguments which is better than 11, and it seems
more future-proof against likely additions to the information we keep
about an index path.
It's potentially useful for an index to repeat the same indexable column
or expression in multiple index columns, if the columns have different
opclasses. (If they share opclasses too, the duplicate column is pretty
useless, but nonetheless we've allowed such cases since 9.0.) However,
the planner failed to cope with this, because createplan.c was relying on
simple equal() matching to figure out which index column each index qual
is intended for. We do have that information available upstream in
indxpath.c, though, so the fix is to not flatten the multi-level indexquals
list when putting it into an IndexPath. Then we can rely on the sublist
structure to identify target index columns in createplan.c. There's a
similar issue for index ORDER BYs (the KNNGIST feature), so introduce a
multi-level-list representation for that too. This adds a bit more
representational overhead, but we might more or less buy that back by not
having to search for matching index columns anymore in createplan.c;
likewise btcostestimate saves some cycles.
Per bug #6351 from Christian Rudolph. Likely symptoms include the "btree
index keys must be ordered by attribute" failure shown there, as well as
"operator MMMM is not a member of opfamily NNNN".
Although this is a pre-existing problem that can be demonstrated in 9.0 and
9.1, I'm not going to back-patch it, because the API changes in the planner
seem likely to break things such as index plugins. The corner cases where
this matters seem too narrow to justify possibly breaking things in a minor
release.
When a view is marked as a security barrier, it will not be pulled up
into the containing query, and no quals will be pushed down into it,
so that no function or operator chosen by the user can be applied to
rows not exposed by the view. Views not configured with this
option cannot provide robust row-level security, but will perform far
better.
Patch by KaiGai Kohei; original problem report by Heikki Linnakangas
(in October 2009!). Review (in earlier versions) by Noah Misch and
others. Design advice by Tom Lane and myself. Further review and
cleanup by me.
You could already rename domains using ALTER TYPE, but with this new
command it is more consistent with how other commands treat domains as
a subcategory of types.
This has been broken just about forever (or more specifically, commit
7f4981f4af) and nobody noticed until
Richard Huxton reported it recently. Analysis and fix by Ross
Reedstrom, although I didn't use his patch. This doesn't seem
important enough to back-patch and is mildly backward incompatible, so
I'm just doing this in master.
We forgot to modify column ACLs, so privileges were still shown as having
been granted by the old owner. This meant that neither the new owner nor
a superuser could revoke the now-untraceable-to-table-owner permissions.
Per bug #6350 from Marc Balmer.
This has been wrong since column ACLs were added, so back-patch to 8.4.
In the previous coding, a user could queue up for an AccessExclusiveLock
on a table they did not have permission to cluster, thus potentially
interfering with access by authorized users who got stuck waiting behind
the AccessExclusiveLock. This approach avoids that. cluster() has the
same permissions-checking requirements as REINDEX TABLE, so this commit
moves the now-shared callback to tablecmds.c and renames it, per
discussion with Noah Misch.
When a PORTAL_ONE_SELECT query is executed, we can opportunistically
reuse the parse/plan shot for the execution phase. This cuts down the
number of snapshots per simple query from 2 to 1 for the simple
protocol, and 3 to 2 for the extended protocol. Since we are only
reusing a snapshot taken early in the processing of the same protocol
message, the change shouldn't be user-visible, except that the remote
possibility of the planning and execution snapshots being different is
eliminated.
Note that this change does not make it safe to assume that the parse/plan
snapshot will certainly be reused; that will currently only happen if
PortalStart() decides to use the PORTAL_ONE_SELECT strategy. It might
be worth trying to provide some stronger guarantees here in the future,
but for now we don't.
Patch by me; review by Dimitri Fontaine.
The original coding of this function overlooked the possibility that
it could be passed anything except simple OpExpr indexquals. But
ScalarArrayOpExpr is possible too, and the code would probably crash
(and surely give ridiculous answers) in such a case. Add logic to try
to estimate sanely for such cases.
In passing, fix the treatment of inner-indexscan cost estimation: it was
failing to scale up properly for multiple iterations of a nestloop.
(I think somebody might've thought that index_pages_fetched() is linear,
but of course it's not.)
Report, diagnosis, and preliminary patch by Marti Raudsepp; I refactored
it a bit and fixed the cost estimation.
Back-patch into 9.1 where the bogus code was introduced.
smgrdounlink takes care to not throw an ERROR if it fails to unlink
something, but that caution was rendered useless by commit
3396000684, which put an smgrexists call in
front of it; smgrexists *does* throw error if anything looks funny, such
as getting a permissions error from trying to open the file. If that
happens post-commit, you get a PANIC, and what's worse the same logic
appears in the WAL replay code, so the database even fails to restart.
Restore the intended behavior by removing the smgrexists call --- it isn't
accomplishing anything that we can't do better by adjusting mdunlink's
ideas of whether it ought to warn about ENOENT or not.
Per report from Joseph Shraibman of unrecoverable crash after trying to
drop a table whose FSM fork had somehow gotten chmod'd to 000 permissions.
Backpatch to 8.4, where the bogus coding was introduced.
This adds support for the more or less SQL-conforming USAGE privilege
on types and domains. The intent is to be able restrict which users
can create dependencies on types, which restricts the way in which
owners can alter types.
reviewed by Yeb Havinga
On reflection, the original name seems way too generic for a global
symbol. A quick check shows this is the only exported function name
in SP-GiST that doesn't begin with "spg" or contain "SpGist", so the
rest of them seem all right.
This makes them enforceable only on the parent table, not on children
tables. This is useful in various situations, per discussion involving
people bitten by the restrictive behavior introduced in 8.4.
Message-Id:
8762mp93iw.fsf@comcast.netCAFaPBrSMMpubkGf4zcRL_YL-AERUbYF_-ZNNYfb3CVwwEqc9TQ@mail.gmail.com
Authors: Nikhil Sontakke, Alex Hunsaker
Reviewed by Robert Haas and myself
Operator classes can specify whether or not they support this; this
preserves the flexibility to use lossy representations within an index.
In passing, move constant data about a given index into the rd_amcache
cache area, instead of doing fresh lookups each time we start an index
operation. This is mainly to try to make sure that spgcanreturn() has
insignificant cost; I still don't have any proof that it matters for
actual index accesses. Also, get rid of useless copying of FmgrInfo
pointers; we can perfectly well use the relcache's versions in-place.
The need for this was debated when we put in the index-only-scan feature,
but at the time we had no near-term expectation of having AMs that could
support such scans for only some indexes; so we kept it simple. However,
the SP-GiST AM forces the issue, so let's fix it.
This patch only installs the new API; no behavior actually changes.
This moves the code around from one huge file into hopefully logical
and more manageable modules. For the most part, the code itself was
not touched, except: PLy_function_handler and PLy_trigger_handler were
renamed to PLy_exec_function and PLy_exec_trigger, because they were
not actually handlers in the PL handler sense, and it makes the naming
more similar to the way PL/pgSQL is organized. The initialization of
the procedure caches was separated into a new function
init_procedure_caches to keep the hash tables private to
plpy_procedures.c.
Jan Urbański and Peter Eisentraut
Ever since we introduced real prepared statements this should work for
different connections. The old solution just emulating prepared statements,
though, wasn't able to handle this.
Closes: #6309
These entries could never be matched to an index clause because they don't
have the index datatype on the left-hand side of the operator. (Their
commutators are in the opclass, which is sensible, but that doesn't mean
these operators should be.) Spotted by a test that I recently added to
opr_sanity to catch exactly this type of thinko. AFAICT there is no code
in gistproc.c that is specifically meant to cover these cases, so nothing
to remove at that level.
SP-GiST is comparable to GiST in flexibility, but supports non-balanced
partitioned search structures rather than balanced trees. As described at
PGCon 2011, this new indexing structure can beat GiST in both index build
time and query speed for search problems that it is well matched to.
There are a number of areas that could still use improvement, but at this
point the code seems committable.
Teodor Sigaev and Oleg Bartunov, with considerable revisions by Tom Lane
Heikki Linnakangas had the idea of rearranging GetSnapshotData to
avoid checking for sub-XIDs when no top-level XID is present. This
patch does that plus further a bit of further, related rearrangement.
Benchmarking show a significant improvement on unlogged tables at
higher concurrency levels, and mostly indifferent result on permanent
tables (which are presumably bottlenecked elsewhere). Most of the
benefit seems to come from using the new NormalTransactionIdPrecedes()
macro rather than the function call TransactionIdPrecedes().
Valid values are --pre-data, data and post-data. The option can be
given more than once. --schema-only is equivalent to
--section=pre-data --section=post-data. --data-only is equivalent
to --section=data.
Andrew Dunstan, reviewed by Joachim Wieland and Josh Berkus.
This works the same as include, except that an error is not thrown
if the file is missing. Instead the fact that it's missing is
logged.
Greg Smith, reviewed by Euler Taveira de Oliveira.
If the referrent of a name changes while we're waiting for the lock,
we must recheck permissons. We also now check the relkind before
locking, since it's easy to do that long the way.
Patch by me; review by Noah Misch.
Previously, renaming a table, sequence, view, index, foreign table,
column, or trigger checked permissions before locking the object, which
meant that if permissions were revoked during the lock wait, we would
still allow the operation. Similarly, if the original object is dropped
and a new one with the same name is created, the operation will be allowed
if we had permissions on the old object; the permissions on the new
object don't matter. All this is now fixed.
Along the way, attempting to rename a trigger on a foreign table now gives
the same error message as trying to create one there in the first place
(i.e. that it's not a table or view) rather than simply stating that no
trigger by that name exists.
Patch by me; review by Noah Misch.
Andrew Dunstan, reviewed by Josh Berkus, Robert Haas and Peter Geoghegan.
This allows dumping of a table definition but not its data, on a per table basis.
Table name patterns are supported just as for --exclude-table.
Removing this bit from xl_info allows us to restore the old limit of four
(not three) separate pages touched by a WAL record, which is needed for the
upcoming SP-GiST feature, and will likely be useful elsewhere in future.
When we implemented XLR_BKP_REMOVABLE in 2007, we had to do it like that
because no special WAL-visible action was taken when starting a backup.
However, now we force a segment switch when starting a backup, so a
compressing WAL archiver (such as pglesslog) that uses the state shown in
the current page header will not be fooled as to removability of backup
blocks. The only downside is that the archiver will not return to
compressing mode for up to one WAL page after the backup is over, which is
a small price to pay for getting back the extra xl_info bit. In any case
the archiver could look for XLOG_BACKUP_END records if it thought it was
worth the trouble to do so.
Bump XLOG_PAGE_MAGIC since this is effectively a change in WAL format.
I forgot to change the functions to use the PG_GETARG_INET_PP() macro,
when I changed DatumGetInetP() to unpack the datum, like Datum*P macros
usually do. Also, I screwed up the definition of the PG_GETARG_INET_PP()
macro, and didn't notice because it wasn't used.
This fixes the memory leak when sorting inet values, as reported
by Jochen Erwied and debugged by Andres Freund. Backpatch to 8.3, like
the previous patch that broke it.
Original patch by Lars Kanis, reviewed by Nishiyama Tomoaki and tweaked some by me.
This compiler, or at least the latest version of it, is currently broken, and
only passes the regression tests if built with -O0.
we don't reach consistency before replaying all of the WAL. Rename the
variable to reachedConsistency, to make its intention clearer.
In master, that was an active bug because of the recent patch to
immediately PANIC if a reference to a missing page is found in WAL after
reaching consistency, as Tom Lane's test case demonstrated. In 9.1 and 9.0,
the only consequence was a misleading "consistent recovery state reached at
%X/%X" message in the log at the beginning of crash recovery (the database
is not consistent at that point yet). In 8.4, the log message was not
printed in crash recovery, even though there was a similar
reachedMinRecoveryPoint local variable that was also set early. So,
backpatch to 9.1 and 9.0.
lost. The only way we detect that at the moment is when write() fails when
we try to write to the socket.
Florian Pflug with small changes by me, reviewed by Greg Jaskiewicz.
Make sure all calls are protected by HAVE_READLINK, and get the buffer
overflow tests right. Be a bit more paranoid about string length in
_tarWriteHeader(), too.
We don't have any such platforms now, but might in the future.
Also, detect cases when a tablespace symlink points to a path that
is longer than we can handle, and give a warning.
Instead, add a function pg_tablespace_location(oid) used to return
the same information, and do this by reading the symbolic link.
Doing it this way makes it possible to relocate a tablespace when the
database is down by simply changing the symbolic link.
This patch creates an API whereby a btree index opclass can optionally
provide non-SQL-callable support functions for sorting. In the initial
patch, we only use this to provide a directly-callable comparator function,
which can be invoked with a bit less overhead than the traditional
SQL-callable comparator. While that should be of value in itself, the real
reason for doing this is to provide a datatype-extensible framework for
more aggressive optimizations, as in Peter Geoghegan's recent work.
Robert Haas and Tom Lane
If unable to connect to "postgres", try "template1". This allows things to
work more smoothly in the case where the postgres database has been
dropped. And just in case that's not good enough, also allow the user to
specify a maintenance database to be used for the initial connection, to
cover the case where neither postgres nor template1 is suitable.
While logically correct, these two Asserts could fail depending on the
vagaries of floating-point arithmetic. In particular, on machines with
floating-point registers wider than standard "double" values, it was
possible for the compiler to compare a rounded-to-double value already
stored in memory with an unrounded long double value still in a register.
Given the preceding checks, these assertions aren't adding much, so let's
just get rid of them rather than try to find a compiler-proof fix.
Per report from Pavel Stehule.
Given the lack of previous complaints, and the fact that only developers
would be likely to trip over it, I'm only going to change this in HEAD,
even though the code has been like this for a long time.
Add a function plpy.cursor that is similar to plpy.execute but uses an
SPI cursor to avoid fetching the entire result set into memory.
Jan Urbański, reviewed by Steve Singer
This can be used to set (or unset) environment variables that will
affect programs called by psql (such as the PAGER), probably most
usefully in a .psqlrc file.
Andrew Dunstan, reviewed by Josh Kupershmidt.
This makes it possible to use a libpq app with home directory set
to /dev/null, for example - treating it the same as if the file
doesn't exist (which it doesn't).
Per bug #6302, reported by Diego Elio Petteno
invalid-page hash table, PANIC immediately. Immediate PANIC is much better
than waiting for end-of-recovery, which is what we did before, because the
end-of-recovery might not come until months later if this is a standby
server.
Also refrain from creating a restartpoint if there are invalid-page entries
in the hash table. Restarting recovery from such a restartpoint would not
see the invalid references, and wouldn't be able to cross-check them when
consistency is reached. That wouldn't matter when things are going smoothly,
but the more sanity checks you have the better.
Fujii Masao
Since record[] uses array_in, it needs to have its element type passed
as typioparam. In HEAD and 9.1, this fix essentially reverts commit
9bc933b212, which was a hack that is no
longer needed since domains don't set their typelem anymore. Before
that, adjust the logic so that only domains are excluded from being
treated like arrays, rather than assuming that only base types should
be included. Add a regression test to demonstrate the need for this.
Per report from Maxim Boguk.
Back-patch to 8.4, where type record[] was added.
In the previous coding, callers were faced with an awkward choice:
look up the name, do permissions checks, and then lock the table; or
look up the name, lock the table, and then do permissions checks.
The first choice was wrong because the results of the name lookup
and permissions checks might be out-of-date by the time the table
lock was acquired, while the second allowed a user with no privileges
to interfere with access to a table by users who do have privileges
(e.g. if a malicious backend queues up for an AccessExclusiveLock on
a table on which AccessShareLock is already held, further attempts
to access the table will be blocked until the AccessExclusiveLock
is obtained and the malicious backend's transaction rolls back).
To fix, allow callers of RangeVarGetRelid() to pass a callback which
gets executed after performing the name lookup but before acquiring
the relation lock. If the name lookup is retried (because
invalidation messages are received), the callback will be re-executed
as well, so we get the best of both worlds. RangeVarGetRelid() is
renamed to RangeVarGetRelidExtended(); callers not wishing to supply
a callback can continue to invoke it as RangeVarGetRelid(), which is
now a macro. Since the only one caller that uses nowait = true now
passes a callback anyway, the RangeVarGetRelid() macro defaults nowait
as well. The callback can also be used for supplemental locking - for
example, REINDEX INDEX needs to acquire the table lock before the index
lock to reduce deadlock possibilities.
There's a lot more work to be done here to fix all the cases where this
can be a problem, but this commit provides the general infrastructure
and fixes the following specific cases: REINDEX INDEX, REINDEX TABLE,
LOCK TABLE, and and DROP TABLE/INDEX/SEQUENCE/VIEW/FOREIGN TABLE.
Per discussion with Noah Misch and Alvaro Herrera.
On a platform that isn't supplying __FILE__, previous coding would either
crash or give a stale result for the filename string. Not sure how likely
that is, but the original code catered for it, so let's keep doing so.
In vpath builds, the __FILE__ macro that is used in verbose error
reports contains the full absolute file name, which makes the error
messages excessively verbose. So keep only the base name, thus
matching the behavior of non-vpath builds.
Force the transaction isolation level to READ COMMITTED in autovacuum
worker and launcher processes. There is no benefit to using a higher
isolation level, and doing so could result in delaying foreground
transactions (or maybe even causing unnecessary serialization failures?).
Noted by Dan Ports.
Also, make sure we disable zero_damaged_pages and statement_timeout in
the autovac launcher, not only workers. Now that the launcher can run
transactions, these settings could affect its behavior, and it seems
like the same arguments apply to the launcher as the workers.
This should make it easier to identify which row is problematic when an
insert or update is processing many rows.
The formatting is similar to that for unique-index violation messages,
except that we limit field widths to 64 bytes since otherwise the message
could get unreasonably long. (In particular, there's currently no attempt
to quote or escape field values that contain commas etc.)
Jan Kundrát, reviewed by Royce Ausburn, somewhat rewritten by me.
The old expression sed 's,$(srcdir),python3,' would normally resolve
as sed 's,.,python3,', which is not really what we wanted. While it
doesn't actually break anything right now, it's still wrong, so put in
a bit more work to make it more robust.
Moving the code two full tab stops to the right requires rethinking of
cosmetic code layout choices, which pgindent isn't really able to do for
us. Whitespace and comment adjustments only, no code changes.
While the deletion in itself wouldn't break things, any further creation
of objects in the script would result in dangling pg_depend entries being
added by recordDependencyOnCurrentExtension(). An example from Phil
Sorber convinced me that this is just barely likely enough to be worth
expending a couple lines of code to defend against. The resulting error
message might be confusing, but it's better than leaving corrupted catalog
contents for the user to deal with.
This function has now grown enough cases that a switch seems appropriate.
This results in a measurable speed improvement on some platforms, and
should certainly not hurt. The code's in need of a pgindent run now,
though.
Andres Freund
The server name for a foreign table was not quoted at need, as per report
from Ronan Dunklau. Also, queries related to FDW options were inadequately
schema-qualified in places where the search path isn't just pg_catalog, and
were inconsistently formatted everywhere, and we didn't always check that
we got the expected number of rows from them.
The EvalPlanQual machinery assumes that whole-row Vars generated for the
outputs of non-table RTEs will be of composite types. However, for the
case where the RTE is a function call returning a scalar type, we were
doing the wrong thing, as a result of sharing code with a parser case
where the function's scalar output is wanted. (Or at least, that's what
that case has done historically; it does seem a bit inconsistent.)
To fix, extend makeWholeRowVar's API so that it can support both use-cases.
This fixes Belinda Cussen's report of crashes during concurrent execution
of UPDATEs involving joins to the result of UNNEST() --- in READ COMMITTED
mode, we'd run the EvalPlanQual machinery after a conflicting row update
commits, and it was expecting to get a HeapTuple not a scalar datum from
the "wholerowN" variable referencing the function RTE.
Back-patch to 9.0 where the current EvalPlanQual implementation appeared.
In 9.1 and up, this patch also fixes failure to attach the correct
collation to the Var generated for a scalar-result case. An example:
regression=# select upper(x.*) from textcat('ab', 'cd') x;
ERROR: could not determine which collation to use for upper() function
This fixes a longstanding but up to now benign bug in the way pg_dumpall
was built. The bug was exposed by recent code adjustments. The Makefile
does not use $(OBJS) to build pg_dumpall, so this fix removes their source
files from the pg_dumpall object and adds in the one source file it
consequently needs.
Use of a randomly chosen large value was never exactly graceful, and
now that there are penalty functions that are intentionally using infinity,
it doesn't seem like a good idea for null-vs-not-null to be using something
less.
In the original implementation, a range-contained-by search had to scan
the entire index because an empty range could be lurking anywhere.
Improve that by adding a flag to upper GiST entries that says whether the
represented subtree contains any empty ranges.
Also, make a simple mod to the penalty function to discourage empty ranges
from getting pushed into subtrees without any. This needs more work, and
the picksplit function should be taught about it too, but that code can be
improved without causing an on-disk compatibility break; so we'll leave it
for another day.
Since we're breaking on-disk compatibility of range values anyway, I took
the opportunity to reorganize the range flags bits; the unused
RANGE_xB_NULL bits are now adjacent, which might open the door for using
them in some other way later.
In passing, remove the GiST range opclass entry for <>, which doesn't seem
like it can really be indexed usefully.
Alexander Korotkov, with some editorializing by Tom
It runs the regression tests, runs pg_upgrade on the populated
database, and compares the before and after dumps. While not actually
a cross-version upgrade, this does detect omissions and bugs in the
involved tools from time to time. It's also possible to do a
cross-version upgrade by manually supplying parameters.
The original coding was
var->value = (Datum) state;
which is bogus, and then in commit 2f0f7b4bce
it was "corrected" to
var->value = PointerGetDatum(state);
which is a faithful translation but still wrong.
This seems purely cosmetic, though, so no need for a back-patch.
Pavel Stehule
Alvaro Herrera
Heikki Linnakangas
Peter Eisentraut
Robert Haas
Magnus Hagander
Tom Lane
Andrew Dunstan
Michael Meskes
Bruce Momjian
Simon Riggs