DEF_PGPORT already comes in from pg_config.h, so we don't need to pass
it in again with a -D option. Apparently a leftover from the shell
script conversion.
It currently doesn't make a difference, but it's inconsistent with
most other usage, and it might interfere with a future patch, so I'll
change it all in a separate commit.
Also, replace tabs with spaces for alignment.
Since start/stop/restart/reload/status is a kind of standard command
set, it seems odd to insert the special-purpose "promote" in between
the closely related "restart" and "reload". So put it after "status"
in code and documentation.
Put the documentation of the -U option in some sensible place.
Rewrite the synopsis sentence in help and documentation to make it
less of a growing mouthful.
Add a postmaster_is_alive() test to the wait loop, so that we stop waiting
if the postmaster dies without removing its pidfile. Unfortunately this
only helps after the postmaster has created its pidfile, since until then
we don't know which PID to check. But if it never does create the pidfile,
we can give up in a relatively short time, so this is a useful addition
in practice. Per suggestion from Fujii Masao, though this doesn't look
very much like his patch.
In addition, improve pg_ctl's ability to cope with pre-existing pidfiles.
Such a file might or might not represent a live postmaster that is going to
block our postmaster from starting, but the previous code pre-judged the
situation and gave up waiting immediately. Now, we will wait for up to 5
seconds to see if our postmaster overwrites such a file. This issue
interacts with Fujii's patch because we would make the wrong conclusion
if we did the postmaster_is_alive() test with a pre-existing PID.
All of this could be improved if we rewrote start_postmaster() so that it
could report the child postmaster's PID, so that we'd know a-priori the
correct PID to test with postmaster_is_alive(). That looks like a bit too
much change for so late in the 9.1 development cycle, unfortunately.
With "-w -t 0", we should report "still starting up", not "ok". If we
fall out of the loop without ever being able to call PQping (because we
were never able to construct a connection string), report "no response",
not "ok". This gets rid of corner cases in which we'd claim the server
had started even though it had not.
Also, if the postmaster.pid file is not there at any point after we've
waited 5 seconds, assume the postmaster has failed and report that, rather
than almost-certainly-fruitlessly continuing to wait. The pidfile should
appear almost instantly even when there is extensive startup work to do,
so 5 seconds is already a very conservative figure. This part is per a
gripe from MauMau --- there might be better ways to do it, but nothing
simple enough to get done for 9.1.
The style is set to "printf" for backwards compatibility everywhere except
on Windows, where it is set to "gnu_printf", which eliminates hundreds of
false error messages from modern versions of gcc arising from %m and %ll{d,u}
formats.
Fix broken test for pre-existing postmaster, caused by wrong code for
appending lines to the lockfile; don't write a failed listen_address
setting into the lockfile; don't arbitrarily change the location of the
data directory in the lockfile compared to previous releases; provide more
consistent and useful definitions of the socket path and listen_address
entries; avoid assuming that pg_ctl has the same DEFAULT_PGSOCKET_DIR as
the postmaster; assorted code style improvements.
Purely cosmetic patch to make our coding standards more consistent ---
we were doing symbolic some places and octal other places. This patch
fixes all C-coded uses of mkdir, chmod, and umask. There might be some
other calls I missed. Inconsistency noted while researching tablespace
directory permissions issue.
Basically, we want to distinguish all cases where the connection was
not made from those where it was. A convenient proxy for this is to
see if we got a message with a SQLSTATE code back from the postmaster.
This presumes that the postmaster will always send us a SQLSTATE in
a failure message, which is true for 7.4 and later postmasters in
every case except fork failure. (We could possibly complicate the
postmaster code to do something about that, but it seems not worth
the trouble, especially since pg_ctl's response for that case should
be to keep waiting anyway.)
If we did get a SQLSTATE from the postmaster, there are basically only
two cases, as per last week's discussion: ERRCODE_CANNOT_CONNECT_NOW
and everything else. Any other error code implies that the postmaster
is in principle willing to accept connections, it just didn't like or
couldn't handle this particular request. We want to make a special
case for ERRCODE_CANNOT_CONNECT_NOW so that "pg_ctl start -w" knows
it should keep waiting.
In passing, pick names for the enum constants that are a tad less
likely to present collision hazards in future.
status, including a status where the server is running but refuses a
postgres connection.
Have pg_ctl use this new function. This fixes the case where pg_ctl
reports that the server is not running (cannot connect) but in fact it
is running.
Replace for loops in makefiles with proper dependencies. Parallel
make can now span across directories. Also, make -k and make -q work
properly.
GNU make 3.80 or newer is now required.
an online backup instead of performing one. pg_ctl can detect that by
checking if recovery.conf exists.
Backup label file is renamed away early in recovery, so the window where
backup label exists during recovery is normally very small, but you can run
into it e.g if restore_command is set incorrectly and the startup process
never finds even the first WAL segment containing the checkpoint record to
start recovery from.
Fujii Masao with comments by me.
linking both executables and shared libraries, and we add on LDFLAGS_EX when
linking executables or LDFLAGS_SL when linking shared libraries. This
provides a significantly cleaner way of dealing with link-time switches than
the former behavior. Also, make sure that the various platform-specific
%.so: %.o rules incorporate LDFLAGS and LDFLAGS_SL; most of them missed that
before. (I did not add these variables for the platforms that invoke $(LD)
directly, however. It's not clear if we can do that safely, since for the
most part we assume these variables use CC command-line syntax.)
Per gripe from Aaron Swenson and subsequent investigation.
- The message "server stopped" should be affected by the -s option, just
like "server started" already was.
- The message "could not start server" should consistently go to stderr.
pg_ctl gets a new mode that runs initdb. Adjust the documentation a bit to
not assume that initdb is the only way to run database cluster initialization.
But don't replace initdb as the canonical way.
Author: Zdenek Kotala <Zdenek.Kotala@Sun.COM>
(could happen if either postgresql.conf or postmaster.opts is empty).
It's been broken since the C version was written for 8.0, so patch
all the way back.
initdb's copy of the function is broken in the same way, but it's
less important there since the input files should never be empty.
Patch that in HEAD only, and also fix some cosmetic differences that
crept into that copy of the function.
Per report from Corry Haines and Jeff Davis.
script.
To do this, have pg_ctl pass down its parent shell's PID in an environment
variable PG_GRANDPARENT_PID, and teach CreateLockFile() to disregard that PID
as a false match if it finds it in postmaster.pid. This allows us to cope
with one level of postgres-owned shell process even with pg_ctl in the way,
so it's just as safe as starting the postmaster directly. You still have to
be careful about how you write the initscript though.
Adjust the comments in contrib/start-scripts/ to not deprecate use of
pg_ctl. Also, fix the ROTATELOGS option in the OSX script, which was
indulging in exactly the sort of unsafe coding that renders this fix
pointless :-(. A pipe inside the "sudo" will probably result in more
than one postgres-owned process hanging around.
Update install-sh to that from Autoconf 2.63, plus our Darwin-specific
changes (which I simplified a bit). install-sh is now able to install
multiple files in one run, so we could simplify our makefiles sometime.
install-sh also now has a -d option to create directories, so we don't need
mkinstalldirs anymore.
Use AC_PROG_MKDIR_P in configure.in, so we can use mkdir -p when available
instead of install-sh -d. For consistency with the rest of the world,
the corresponding make variable has been renamed from $(mkinstalldirs) to
$(MKDIR_P).
are using our own ports of getopt or getopt_long, those will define
the variable for themselves; and if not, we don't need these, because
we never touch the variable anyway.
have pg_ctl warn about this.
Cancel running online backups (by renaming the backup_label file,
thus rendering the backup useless) when shutting down in fast mode.
Laurenz Albe
by explicitly adding back the user to the DACL of the new process.
This fixes the failure case when executing as the Administrator
user, which had no permissions left at all after we dropped the
Administrators group.
Dave Page with some modifications from me
non-default settings for the postmaster's port number. The code to parse
command line options and postgresql.conf entries wasn't quite right about
whitespace or quotes, and it was coded in a not-very-readable way too.
Per bug #3969 from Itagaki Takahiro, though this is more extensive than his
proposed patch (which fixed only the whitespace problem).
This code has been broken since it was put in in 8.0, so patch all the way
back.
PQconnectionNeedsPassword function that tells the right thing for whether to
prompt for a password, and improve PQconnectionUsedPassword so that it checks
whether the password used by the connection was actually supplied as a
connection argument, instead of coming from environment or a password file.
Per bug report from Mark Cave-Ayland and subsequent discussion.
duplicative -DFRONTEND flags from many Makefiles. We still need Makefile
control of the symbol in a few places that compile frontend-or-backend
src/port/ files, but it's a lot cleaner than before.
Hiroshi Saito
error message, by using PQconnectionUsedPassword() instead. Someday
we might be able to localize that error message, but not until this
coding technique has disappeared everywhere.
Standard English uses "may", "can", and "might" in different ways:
may - permission, "You may borrow my rake."
can - ability, "I can lift that log."
might - possibility, "It might rain today."
Unfortunately, in conversational English, their use is often mixed, as
in, "You may use this variable to do X", when in fact, "can" is a better
choice. Similarly, "It may crash" is better stated, "It might crash".
opposed to what other versions apparently do, so it's not safe to print an
error message. Besides, getopt_long itself already did, so it's redundant
anyway.
o remove many WIN32_CLIENT_ONLY defines
o add WIN32_ONLY_COMPILER define
o add 3rd argument to open() for portability
o add include/port/win32_msvc directory for
system includes
Magnus Hagander
comment line where output as too long, and update typedefs for /lib
directory. Also fix case where identifiers were used as variable names
in the backend, but as typedefs in ecpg (favor the backend for
indenting).
Backpatch to 8.1.X.
pg_strcasecmp and pg_strncasecmp ... but I see some of the former have
crept back in.
Eternal vigilance is the price of locale independence, apparently.
unlike template0 and template1 does not have any special status in
terms of backend functionality. However, all external utilities such
as createuser and createdb now connect to "postgres" instead of
template1, and the documentation is changed to encourage people to use
"postgres" instead of template1 as a play area. This should fix some
longstanding gotchas involving unexpected propagation of database
objects by createdb (when you used template1 without understanding
the implications), as well as ameliorating the problem that CREATE
DATABASE is unhappy if anyone else is connected to template1.
Patch by Dave Page, minor editing by Tom Lane. All per recent
pghackers discussions.