We can't handle this in the general case due to limitations of the
planner's data representations; but we can allow it in many useful cases,
by being careful to flatten only when we are pulling a single-row subquery
up into a FROM (or, equivalently, inner JOIN) node that will still have at
least one remaining relation child. Per discussion of an example from
Kyotaro Horiguchi.
If an inline-able SQL function taking a composite argument is used in a
LATERAL subselect, and the composite argument is a lateral reference,
the planner could fail with "variable not found in subplan target list",
as seen in bug #11703 from Karl Bartel. (The outer function call used in
the bug report and in the committed regression test is not really necessary
to provoke the bug --- you can get it if you manually expand the outer
function into "LATERAL (SELECT inner_function(outer_relation))", too.)
The cause of this is that we generate the reltargetlist for the referenced
relation before doing eval_const_expressions() on the lateral sub-select's
expressions (cf find_lateral_references()), so what's scheduled to be
emitted by the referenced relation is a whole-row Var, not the simplified
single-column Var produced by optimizing the function's FieldSelect on the
whole-row Var. Then setrefs.c fails to match up that lateral reference to
what's available from the outer scan.
Preserving the FieldSelect optimization in such cases would require either
major planner restructuring (to recursively do expression simplification
on sub-selects much earlier) or some amazingly ugly kluge to change the
reltargetlist of a possibly-already-planned relation. It seems better
just to skip the optimization when the Var is from an upper query level;
the case is not so common that it's likely anyone will notice a few
wasted cycles.
AFAICT this problem only occurs for uplevel LATERAL references, so
back-patch to 9.3 where LATERAL was added.
In commit c1352052ef, I implemented an
optimization that assumed that a function's argument expressions would
either always return a set (ie multiple rows), or always not. This is
wrong however: we allow CASE expressions in which some arms return a set
of some type and others just return a scalar of that type. There may be
other examples as well. To fix, replace the run-time test of whether an
argument returned a set with a static precheck (expression_returns_set).
This adds a little bit of query startup overhead, but it seems barely
measurable.
Per bug #8228 from David Johnston. This has been broken since 8.0,
so patch all supported branches.
SQL-standard TABLE() is a subset of UNNEST(); they deal with arrays and
other collection types. This feature, however, deals with set-returning
functions. Use a different syntax for this feature to keep open the
possibility of implementing the standard TABLE().
This patch adds the ability to write TABLE( function1(), function2(), ...)
as a single FROM-clause entry. The result is the concatenation of the
first row from each function, followed by the second row from each
function, etc; with NULLs inserted if any function produces fewer rows than
others. This is believed to be a much more useful behavior than what
Postgres currently does with multiple SRFs in a SELECT list.
This syntax also provides a reasonable way to combine use of column
definition lists with WITH ORDINALITY: put the column definition list
inside TABLE(), where it's clear that it doesn't control the ordinality
column as well.
Also implement SQL-compliant multiple-argument UNNEST(), by turning
UNNEST(a,b,c) into TABLE(unnest(a), unnest(b), unnest(c)).
The SQL standard specifies TABLE() with only a single function, not
multiple functions, and it seems to require an implicit UNNEST() which is
not what this patch does. There may be something wrong with that reading
of the spec, though, because if it's right then the spec's TABLE() is just
a pointless alternative spelling of UNNEST(). After further review of
that, we might choose to adopt a different syntax for what this patch does,
but in any case this functionality seems clearly worthwhile.
Andrew Gierth, reviewed by Zoltán Böszörményi and Heikki Linnakangas, and
significantly revised by me
It's possible that inlining of SQL functions (or perhaps other changes?)
has exposed typmod information not known at parse time. In such cases,
Vars generated by query_planner might have valid typmod values while the
original grouping columns only have typmod -1. This isn't a semantic
problem since the behavior of grouping only depends on type not typmod,
but it breaks locate_grouping_columns' use of tlist_member to locate the
matching entry in query_planner's result tlist.
We can fix this without an excessive amount of new code or complexity by
relying on the fact that locate_grouping_columns only gets called when
make_subplanTargetList has set need_tlist_eval == false, and that can only
happen if all the grouping columns are simple Vars. Therefore we only need
to search the sub_tlist for a matching Var, and we can reasonably define a
"match" as being a match of the Var identity fields
varno/varattno/varlevelsup. The code still Asserts that vartype matches,
but ignores vartypmod.
Per bug #8393 from Evan Martin. The added regression test case is
basically the same as his example. This has been broken for a very long
time, so back-patch to all supported branches.
The SQL standard does not have general functions-in-FROM, but it does
allow UNNEST() there (see the <collection derived table> production),
and the semantics of that are defined to include lateral references.
So spec compliance requires allowing lateral references within UNNEST()
even without an explicit LATERAL keyword. Rather than making UNNEST()
a special case, it seems best to extend this flexibility to any
function-in-FROM. We'll still allow LATERAL to be written explicitly
for clarity's sake, but it's now a noise word in this context.
In theory this change could result in a change in behavior of existing
queries, by allowing what had been an outer reference in a function-in-FROM
to be captured by an earlier FROM-item at the same level. However, all
pre-9.3 PG releases have a bug that causes them to match variable
references to earlier FROM-items in preference to outer references (and
then throw an error). So no previously-working query could contain the
type of ambiguity that would risk a change of behavior.
Per a suggestion from Andrew Gierth, though I didn't use his patch.
There were corner cases in which the planner would attempt to inline such
a function, which would result in a failure at runtime due to loss of
information about exactly what the result record type is. Fix by disabling
inlining when the function's recorded result type is RECORD. There might
be some sub-cases where inlining could still be allowed, but this is a
simple and backpatchable fix, so leave refinements for another day.
Per bug #5777 from Nate Carson.
Back-patch to all supported branches. 8.1 happens to avoid a core-dump
here, but it still does the wrong thing.
relation using the general PARAM_EXEC executor parameter mechanism, rather
than the ad-hoc kluge of passing the outer tuple down through ExecReScan.
The previous method was hard to understand and could never be extended to
handle parameters coming from multiple join levels. This patch doesn't
change the set of possible plans nor have any significant performance effect,
but it's necessary infrastructure for future generalization of the concept
of an inner indexscan plan.
ExecReScan's second parameter is now unused, so it's removed.
we have to cope with the possibility that the declared result rowtype contains
dropped columns. This fails in 8.4, as per bug #5240.
While at it, be more paranoid about inserting binary coercions when inlining.
The pre-8.4 code did not really need to worry about that because it could not
inline at all in any case where an added coercion could change the behavior
of the function's statement. However, when inlining a SRF we allow sorting,
grouping, and set-ops such as UNION. In these cases, modifying one of the
targetlist entries that the sort/group/setop depends on could conceivably
change the behavior of the function's statement --- so don't inline when
such a case applies.
function returning setof record. This used to work, more or less
accidentally, but I had broken it while extending the code to allow
materialize-mode functions to be called in select lists. Add a regression
test case so it doesn't get broken again. Per gripe from Greg Davidson.
TupleTableSlots. We have functions for retrieving a minimal tuple from a slot
after storing a regular tuple in it, or vice versa; but these were implemented
by converting the internal storage from one format to the other. The problem
with that is it invalidates any pass-by-reference Datums that were already
fetched from the slot, since they'll be pointing into the just-freed version
of the tuple. The known problem cases involve fetching both a whole-row
variable and a pass-by-reference value from a slot that is fed from a
tuplestore or tuplesort object. The added regression tests illustrate some
simple cases, but there may be other failure scenarios traceable to the same
bug. Note that the added tests probably only fail on unpatched code if it's
built with --enable-cassert; otherwise the bug leads to fetching from freed
memory, which will not have been overwritten without additional conditions.
Fix by allowing a slot to contain both formats simultaneously; which turns out
not to complicate the logic much at all, if anything it seems less contorted
than before.
Back-patch to 8.2, where minimal tuples were introduced.
RETURNING clause, not just a SELECT as formerly.
A side effect of this patch is that when a set-returning SQL function is used
in a FROM clause, performance is improved because the output is collected into
a tuplestore within the function, rather than using the less efficient
value-per-call mechanism.
>>ISTM that "source" is worth knowing.
>
> Hm, possibly. Any other opinions?
This version has the seven fields I proposed, including "source". Here's
an example that shows why I think it's valuable:
regression=# \x
Expanded display is on.
regression=# select * from pg_settings where name = 'enable_seqscan';
-[ RECORD 1 ]-----------
name | enable_seqscan
setting | on
context | user
vartype | bool
source | default
min_val |
max_val |
regression=# update pg_settings set setting = 'off' where name =
'enable_seqscan';
-[ RECORD 1 ]---
set_config | off
regression=# select * from pg_settings where name = 'enable_seqscan';
-[ RECORD 1 ]-----------
name | enable_seqscan
setting | off
context | user
vartype | bool
source | session
min_val |
max_val |
regression=# alter user postgres set enable_seqscan to 'off';
ALTER USER
(log out and then back in again)
regression=# \x
Expanded display is on.
regression=# select * from pg_settings where name = 'enable_seqscan';
-[ RECORD 1 ]-----------
name | enable_seqscan
setting | off
context | user
vartype | bool
source | user
min_val |
max_val |
In the first case, enable_seqscan is set to its default value. After
setting it to off, it is obvious that the value has been changed for the
session only. In the third case, you can see that the value has been set
specifically for the user.
Joe Conway
to build dependencies for rules, constraint expressions, and default
expressions. Repair some problems in the original design of
recursiveDeletion() exposed by more complex dependency sets. Fix
regression tests that were deleting things in illegal sequences.
Tom Lane
Noah Misch
Greg Stark
Peter Eisentraut
Bruce Momjian