Four related issues:
1) attnos/varnos/resnos for EXCLUDED were out of sync when a column
after one dropped in the underlying relation was referenced.
2) References to whole-row variables (i.e. EXCLUDED.*) lead to errors.
3) It was possible to reference system columns in the EXCLUDED pseudo
relations, even though they would not have valid contents.
4) References to EXCLUDED were rewritten by the RLS machinery, as
EXCLUDED was treated as if it were the underlying relation.
To fix the first two issues, generate the excluded targetlist with
dropped columns in mind and add an entry for whole row
variables. Instead of unconditionally adding a wholerow entry we could
pull up the expression if needed, but doing it unconditionally seems
simpler. The wholerow entry is only really needed for ruleutils/EXPLAIN
support anyway.
The remaining two issues are addressed by changing the EXCLUDED RTE to
have relkind = composite. That fits with EXCLUDED not actually being a
real relation, and allows to treat it differently in the relevant
places. scanRTEForColumn now skips looking up system columns when the
RTE has a composite relkind; fireRIRrules() already had a corresponding
check, thereby preventing RLS expansion on EXCLUDED.
Also add tests for these issues, and improve a few comments around
excluded handling in setrefs.c.
Reported-By: Peter Geoghegan, Geoff Winkless
Author: Andres Freund, Amit Langote, Peter Geoghegan
Discussion: CAEzk6fdzJ3xYQZGbcuYM2rBd2BuDkUksmK=mY9UYYDugg_GgZg@mail.gmail.com,
CAM3SWZS+CauzbiCEcg-GdE6K6ycHE_Bz6Ksszy8AoixcMHOmsA@mail.gmail.com
Backpatch: 9.5, where ON CONFLICT was introduced
Neither the deparsing of the new alias for INSERT's target table, nor of
the inference clause was supported. Also fixup a typo in an error
message.
Add regression tests to test those code paths.
Author: Peter Geoghegan
Specifically the tlist and rti of the pseudo "excluded" relation weren't
properly treated by expression_tree_walker, which lead to errors when
excluded was referenced inside a rule because the varnos where not
properly adjusted. Similar omissions in OffsetVarNodes and
expression_tree_mutator had less impact, but should obviously be fixed
nonetheless.
A couple tests of for ON CONFLICT UPDATE into INSERT rule bearing
relations have been added.
In passing I updated a couple comments.
The newly added ON CONFLICT clause allows to specify an alternative to
raising a unique or exclusion constraint violation error when inserting.
ON CONFLICT refers to constraints that can either be specified using a
inference clause (by specifying the columns of a unique constraint) or
by naming a unique or exclusion constraint. DO NOTHING avoids the
constraint violation, without touching the pre-existing row. DO UPDATE
SET ... [WHERE ...] updates the pre-existing tuple, and has access to
both the tuple proposed for insertion and the existing tuple; the
optional WHERE clause can be used to prevent an update from being
executed. The UPDATE SET and WHERE clauses have access to the tuple
proposed for insertion using the "magic" EXCLUDED alias, and to the
pre-existing tuple using the table name or its alias.
This feature is often referred to as upsert.
This is implemented using a new infrastructure called "speculative
insertion". It is an optimistic variant of regular insertion that first
does a pre-check for existing tuples and then attempts an insert. If a
violating tuple was inserted concurrently, the speculatively inserted
tuple is deleted and a new attempt is made. If the pre-check finds a
matching tuple the alternative DO NOTHING or DO UPDATE action is taken.
If the insertion succeeds without detecting a conflict, the tuple is
deemed inserted.
To handle the possible ambiguity between the excluded alias and a table
named excluded, and for convenience with long relation names, INSERT
INTO now can alias its target table.
Bumps catversion as stored rules change.
Author: Peter Geoghegan, with significant contributions from Heikki
Linnakangas and Andres Freund. Testing infrastructure by Jeff Janes.
Reviewed-By: Heikki Linnakangas, Andres Freund, Robert Haas, Simon Riggs,
Dean Rasheed, Stephen Frost and many others.
The "simple" path for printing VALUES clauses doesn't work if we need
to attach nondefault column aliases, because there's noplace to do that
in the minimal VALUES() syntax. So modify get_simple_values_rte() to
detect nondefault aliases and treat that as a non-simple case. This
further exposes that the "non-simple" path never actually worked;
it didn't produce valid syntax. Fix that too. Per bug #12789 from
Curtis McEnroe, and analysis by Andrew Gierth.
Back-patch to all supported branches. Before 9.3, this also requires
back-patching the part of commit 092d7ded29
that created get_simple_values_rte() to begin with; inserting the extra
test into the old factorization of that logic would've been too messy.
The rules regression test prints all known views and rules, which is a set
that changes regularly. Previously, a change in one rule would frequently
lead to whitespace changes across the entire output of this query, which is
painful to verify and causes undesirable conflicts between unrelated patch
sets. Use \a mode to improve matters. Also use \t mode to suppress the
total-rows count, which was also a source of unnecessary patch conflicts.
Likewise modify the output mode for the list of indexed tables generated
in sanity_check.sql. There might be other places where we should use this
idea, but these are the ones that have caused the most problems.
Andres Freund
Treat TOAST index just the same as normal one and get the OID
of TOAST index from pg_index but not pg_class.reltoastidxid.
This change allows us to handle multiple TOAST indexes, and
which is required infrastructure for upcoming
REINDEX CONCURRENTLY feature.
Patch by Michael Paquier, reviewed by Andres Freund and me.
Fixes oversight in commit 2ffa740be9.
Per report from Josh Kupershmidt.
I think we've broken this case before, so let's add a regression test
this time.
Also make sure other fields of the view's pg_class entry are appropriate
for a view; it shouldn't have relfrozenxid set for instance.
This ancient omission isn't believed to have any serious consequences in
versions 8.4-9.2, so no backpatch. But let's fix it before it does bite
us in some serious way. It's just luck that the case doesn't cause
problems for autovacuum. (It did cause problems in 8.3, but that's out
of support.)
Andres Freund
Views should not have any pg_attribute entries for system columns.
However, we forgot to remove such entries when converting a table to a
view. This could lead to crashes later on, if someone attempted to
reference such a column, as reported by Kohei KaiGai.
Patch in HEAD only. This bug has been there forever, but in the back
branches we will have to defend against existing mis-converted views,
so it doesn't seem worthwhile to change the conversion code too.
Some line feeds are added to target lists and from lists to make
them more readable. By default they wrap at 80 columns if possible,
but the wrap column is also selectable - if 0 it wraps after every
item.
Andrew Dunstan, reviewed by Hitoshi Harada.
inheritance child of an UPDATE/DELETE target relation can be excluded by
constraints. I had rearranged some code in set_append_rel_pathlist() to
avoid "useless" work when a child is excluded, but overdid it and left
the child with no cheapest_path entry, causing possible failure later
if the appendrel was involved in a join. Also, it seems that the dummy
plan generated by inheritance_planner() when all branches are excluded
has to be a bit less dummy now than was required in 8.2.
Per report from Jan Wieck. Add his test case to the regression tests.
in UPDATE. We also now issue a NOTICE if a query has _any_ implicit
range table entries -- in the past, we would only warn about implicit
RTEs in SELECTs with at least one explicit RTE.
As a result of the warning change, 25 of the regression tests had to
be updated. I also took the opportunity to remove some bogus whitespace
differences between some of the float4 and float8 variants. I believe
I have correctly updated all the platform-specific variants, but let
me know if that's not the case.
Original patch for DELETE ... USING from Euler Taveira de Oliveira,
reworked by Neil Conway.
large objects. Dump all these in pg_dump; also add code to pg_dump
user-defined conversions. Make psql's large object code rely on
the backend for inserting/deleting LOB comments, instead of trying to
hack pg_description directly. Documentation and regression tests added.
Christopher Kings-Lynne, code reviewed by Tom
parameter to allow it to be forced off for comparison purposes.
Add ORDER BY clauses to a bunch of regression test queries that will
otherwise produce randomly-ordered output in the new regime.
rather than being reordered according to INSTEAD attribute for
implementation convenience.
Also, increase compiled-in recursion depth limit from 10 to 100 rewrite
cycles. 10 seems pretty marginal for situations where multiple rules
exist for the same query. There was a complaint about this recently,
so I'm going to bump it up. (Perhaps we should make the limit a GUC
parameter, but that's too close to being a new feature to do in beta.)
handled as special productions. This is needed to keep us honest about
user-schema type names that happen to coincide with system type names.
Per pghackers discussion 24-Apr. To avoid bloating the keyword list
too much, I removed the translations for datetime, timespan, and lztext,
all of which were slated for destruction several versions back anyway.
DROP RULE and COMMENT ON RULE syntax adds an 'ON tablename' clause,
similar to TRIGGER syntaxes. To allow loading of existing pg_dump
files containing COMMENT ON RULE, the COMMENT code will still accept
the old syntax --- but only if the target rulename is unique across
the whole database.
entries, per pghackers discussion. This fixes aggregates to live in
namespaces, and also simplifies/speeds up lookup in parse_func.c.
Also, add a 'proimplicit' flag to pg_proc that controls whether a type
coercion function may be invoked implicitly, or only explicitly. The
current settings of these flags are more permissive than I would like,
but we will need to debate and refine the behavior; for now, I avoided
breaking regression tests as much as I could.
for speed reasons; its result type also changes to int8. avg() on these
datatypes now accumulates the running sum in int8 for speed; but we still
deliver the final result as numeric, so that fractional accuracy is
preserved.
count() now counts and returns in int8, not int4. I am a little nervous
about this possibly breaking users' code, but there didn't seem to be
a strong sentiment for avoiding the problem. If we get complaints during
beta, we can change count back to int4 and add a "count8" aggregate.
For that matter, users can do it for themselves with a simple CREATE
AGGREGATE command; the int4inc function is still present, so no C hacking
is needed.
Also added max() and min() aggregates for OID that do proper unsigned
comparison, instead of piggybacking on int4 aggregates.
initdb forced.
in cases of qualified rules as well as unqualified ones. Tweak rules
test to avoid cluttering output with dummy SELECT results. Update
documentation to match code.
in rules regression test, in order to eliminate bogus test 'failures'
that occur due to platform-dependent and join-implementation-dependent
ordering of tuples. I'm not sure that I got all of the SELECTs that need
ordering clauses --- we may need some more. But this takes care of the
diffs between my platform and Jan's.
rule system semantics by having Var nodes referenced across multiple
parsetrees when rules split them.
Added more tests to the rules regression test.
The code in question resulted from v6.3 based development and was
a little careless applied to the v6.5 source tree.
Jan
Andres Freund
Tom Lane
Fujii Masao
Andrew Dunstan
Peter Eisentraut
Neil Conway
Bruce Momjian
Jan Wieck
Thomas G. Lockhart