The server hasn't paid attention to the TZ environment variable since
commit ca4af308c3, but that commit missed removing this documentation
reference, as did commit d883b916a9 which added the reference where
it now belongs (initdb).
Back-patch to 9.2 where the behavior changed. Also back-patch
d883b916a9 as needed.
Matthew Somerville
The description of what the per-transaction log file says for skipped
transactions is just plain wrong.
Report and patch by Tomas Vondra, reviewed by Fabien Coelho and
modified by me.
Documentation mentioned B-tree, GiST and GIN as able to do multicolumn
indexes; I failed to add BRIN to the list.
Author: Petr Jediný
Reviewed-By: Fujii Masao, Emre Hasegeli
The chapter "Interfacing Extensions To Indexes" and CREATE OPERATOR
CLASS reference page were missed when BRIN was added. We document
all our other index access methods there, so make sure BRIN complies.
Author: Álvaro Herrera
Reported-By: Julien Rouhaud, Tom Lane
Reviewed-By: Emre Hasegeli
Discussion: https://www.postgresql.org/message-id/56CF604E.9000303%40dalibo.com
Backpatch: 9.5, where BRIN was introduced
Previously recovery_min_apply_delay was applied even before recovery
had reached consistency. This could cause us to wait a long time
unexpectedly for read-only connections to be allowed. It's problematic
because the standby was useless during that wait time.
This patch changes recovery_min_apply_delay so that it's applied once
the database has reached the consistent state. That is, even if the delay
is set, the standby tries to replay WAL records as fast as possible until
it has reached consistency.
Author: Michael Paquier
Reviewed-By: Julien Rouhaud
Reported-By: Greg Clough
Backpatch: 9.4, where recovery_min_apply_delay was added
Bug: #13770
Discussion: http://www.postgresql.org/message-id/20151111155006.2644.84564@wrigleys.postgresql.org
Dead or half-dead index leaf pages were incorrectly reported as live, as a
consequence of a code rearrangement I made (during a moment of severe brain
fade, evidently) in commit d287818eb5.
The index metapage was not counted in index_size, causing that result to
not agree with the actual index size on-disk.
Index root pages were not counted in internal_pages, which is inconsistent
compared to the case of a root that's also a leaf (one-page index), where
the root would be counted in leaf_pages. Aside from that inconsistency,
this could lead to additional transient discrepancies between the reported
page counts and index_size, since it's possible for pgstatindex's scan to
see zero or multiple pages marked as BTP_ROOT, if the root moves due to
a split during the scan. With these fixes, index_size will always be
exactly one page more than the sum of the displayed page counts.
Also, the index_size result was incorrectly documented as being measured in
pages; it's always been measured in bytes. (While fixing that, I couldn't
resist doing some small additional wordsmithing on the pgstattuple docs.)
Including the metapage causes the reported index_size to not be zero for
an empty index. To preserve the desired property that the pgstattuple
regression test results are platform-independent (ie, BLCKSZ configuration
independent), scale the index_size result in the regression tests.
The documentation issue was reported by Otsuka Kenji, and the inconsistent
root page counting by Peter Geoghegan; the other problems noted by me.
Back-patch to all supported branches, because this has been broken for
a long time.
Clarify the description of which transactions will block a CREATE INDEX
CONCURRENTLY command from proceeding, and mention that the index might
still not be usable after CREATE INDEX completes. (This happens if the
index build detected broken HOT chains, so that pg_index.indcheckxmin gets
set, and there are open old transactions preventing the xmin horizon from
advancing past the index's initial creation. I didn't want to explain what
broken HOT chains are, though, so I omitted an explanation of exactly when
old transactions prevent the index from being used.)
Per discussion with Chris Travers. Back-patch to all supported branches,
since the same text appears in all of them.
In runtime.sgml, the old formulas for calculating the reasonable
values of SEMMNI and SEMMNS were incorrect. They have forgotten to
count the number of semaphores which both the checkpointer process
(introduced in 9.2) and the background worker processes (introduced
in 9.3) need.
This commit fixes those formulas so that they count the number of
semaphores which the checkpointer process and the background worker
processes need.
Report and patch by Kyotaro Horiguchi. Only the patch for 9.3 was
modified by me. Back-patch to 9.2 where the checkpointer process was
added and the number of needed semaphores was increased.
Author: Kyotaro Horiguchi
Reviewed-by: Fujii Masao
Backpatch: 9.2
Discussion: http://www.postgresql.org/message-id/20160203.125119.66820697.horiguchi.kyotaro@lab.ntt.co.jp
Many automated test suites call pg_ctl. Buildfarm members axolotl,
hornet, mandrill, shearwater, sungazer and tern have failed when server
shutdown took longer than the pg_ctl default 60s timeout. This addition
permits slow hosts to easily raise the timeout without us editing a
--timeout argument into every test suite pg_ctl call. Back-patch to 9.1
(all supported versions) for the sake of automated testing.
Reviewed by Tom Lane.
Get rid of the false implication that PRIMARY KEY is exactly equivalent to
UNIQUE + NOT NULL. That was more-or-less true at one time in our
implementation, but the standard doesn't say that, and we've grown various
features (many of them required by spec) that treat a pkey differently from
less-formal constraints. Per recent discussion on pgsql-general.
I failed to resist the temptation to do some other wordsmithing in the
same area.
Since there currently is only one possible parenthesized option, namely
VERBOSE, it's a bit pointless to show it with "{ } [, ... ]". The curly
braces are useless and therefore confusing, as seen in a recent question
from Karsten Hilbert. Remove the extra decoration for the time being;
we can put it back when and if REINDEX grows some more options.
The documentation mentioned contrib/ but the module was moved to
src/test/modules/ by commit 22dfd116a1 of 9.5 era.
Problem pointed out by Dickson Guedes in bug #13896
Backpatch-to: 9.5.
Commit 43cd468cf0 added some wording to create_policy.sgml purporting
to warn users against a race condition of the sort that had been noted some
time ago by Peter Geoghegan. However, that warning was far too vague to be
useful (or at least, I completely failed to grasp what it was on about).
Since the problem case occurs with a security design pattern that lots of
people are likely to try to use, we need to be as clear as possible about
it. Provide a concrete example in the main-line docs in place of the
original warning.
Some time back we agreed that row_security=off should not be a way to
bypass RLS entirely, but only a way to get an error if it was being
applied. However, the code failed to act that way for table owners.
Per discussion, this is a must-fix bug for 9.5.0.
Adjust the logic in rls.c to behave as expected; also, modify the
error message to be more consistent with the new interpretation.
The regression tests need minor corrections as well. Also update
the comments about row_security in ddl.sgml to be correct. (The
official description of the GUC in config.sgml is already correct.)
I failed to resist the temptation to do some other very minor
cleanup as well, such as getting rid of a duplicate extern declaration.
As pointed out by Michael Paquier, recovery_min_apply_delay didn't exist
in 9.0-9.3, making the release note text not very useful. Instead make it
talk about recovery_target_xid, which did exist then.
9.0 is already out of support, but we can fix the text in the newer
branches' copies of its release notes.
Common mathematical convention is that exponentiation associates right to
left. We aren't going to change the parser for this, but we could note
it in the operator's description. (It's already noted in the operator
precedence/associativity table, but users might not look there.)
Per bug #13829 from Henrik Pauli.
Tone down an overly strong statement about which pseudo-types PLs are
likely to allow. Add "event_trigger" to the list, as well as
"pg_ddl_command" in 9.5/HEAD. Back-patch to 9.3 where event_trigger
was added.
Per a recommendation from Tomas Vondra, it's more helpful to refer to
the value that determines how skewed a Gaussian or exponential
distribution is as a parameter rather than a threshold.
Since it's not quite too late to get this right in 9.5, where it was
introduced, back-patch this. Most of the patch changes only comments
and documentation, but a few pgbench messages are altered to match.
Fabien Coelho, reviewed by Michael Paquier and by me.
Clarify that SELECT policies are now applied when SELECT rights
are required for a given query, even if the query is an UPDATE or
DELETE query. Pointed out by Noah.
Additionally, note the risk regarding concurrently open transactions
where a relation which controls access to the rows of another relation
are updated and the rows of the primary relation are also being
modified. Pointed out by Peter Geoghegan.
Back-patch to 9.5.
This has worked that way for a long time, maybe always, but you would
not have known it from the documentation. Also back-patch the notes
I added to HEAD earlier today about behavior of the "-f -" switch,
which likewise have been valid for many releases.
Commit e7cb7ee145 provided basic
infrastructure for allowing a foreign data wrapper or custom scan
provider to replace a join of one or more tables with a scan.
However, this infrastructure failed to take into account the need
for possible EvalPlanQual rechecks, and ExecScanFetch would fail
an assertion (or just overwrite memory) if such a check was attempted
for a plan containing a pushed-down join. To fix, adjust the EPQ
machinery to skip some processing steps when scanrelid == 0, making
those the responsibility of scan's recheck method, which also has
the responsibility in this case of correctly populating the relevant
slot.
To allow foreign scans to gain control in the right place to make
use of this new facility, add a new, optional RecheckForeignScan
method. Also, allow a foreign scan to have a child plan, which can
be used to correctly populate the slot (or perhaps for something
else, but this is the only use currently envisioned).
KaiGai Kohei, reviewed by Robert Haas, Etsuro Fujita, and Kyotaro
Horiguchi.
Commit d04c8ed904 added another support function to the GIST API,
but overlooked mentioning it in xindex.sgml's summary of index support
functions.
Anastasia Lubennikova
In commit 1ea0c73c2 I added a section to user-manag.sgml about how to drop
roles that own objects; but as pointed out by Stephen Frost, I neglected
that shared objects (databases or tablespaces) may need special treatment.
Fix that. Back-patch to supported versions, like the previous patch.
The POSIX standard for tar headers requires archive member sizes to be
printed in octal with at most 11 digits, limiting the representable file
size to 8GB. However, GNU tar and apparently most other modern tars
support a convention in which oversized values can be stored in base-256,
allowing any practical file to be a tar member. Adopt this convention
to remove two limitations:
* pg_dump with -Ft output format failed if the contents of any one table
exceeded 8GB.
* pg_basebackup failed if the data directory contained any file exceeding
8GB. (This would be a fatal problem for installations configured with a
table segment size of 8GB or more, and it has also been seen to fail when
large core dump files exist in the data directory.)
File sizes under 8GB are still printed in octal, so that no compatibility
issues are created except in cases that would have failed entirely before.
In addition, this patch fixes several bugs in the same area:
* In 9.3 and later, we'd defined tarCreateHeader's file-size argument as
size_t, which meant that on 32-bit machines it would write a corrupt tar
header for file sizes between 4GB and 8GB, even though no error was raised.
This broke both "pg_dump -Ft" and pg_basebackup for such cases.
* pg_restore from a tar archive would fail on tables of size between 4GB
and 8GB, on machines where either "size_t" or "unsigned long" is 32 bits.
This happened even with an archive file not affected by the previous bug.
* pg_basebackup would fail if there were files of size between 4GB and 8GB,
even on 64-bit machines.
* In 9.3 and later, "pg_basebackup -Ft" failed entirely, for any file size,
on 64-bit big-endian machines.
In view of these potential data-loss bugs, back-patch to all supported
branches, even though removal of the documented 8GB limit might otherwise
be considered a new feature rather than a bug fix.
This back-ports commit 13d856e177 and assorted followon patches
into 9.4 and 9.5. 9.5 and HEAD are now substantially identical in all
the files touched by this commit, except that 010_pg_basebackup.pl has
a few more tests related to the new --slot option. 9.4 has many fewer
TAP tests, but the test infrastructure files are substantially the same,
with the exception that 9.4 lacks the single-tmp-install infrastructure
introduced in 9.5 (commit dcae5facca).
The primary motivation for this patch is to ensure that TAP test case
fixes can be back-patched without hazards of the kind seen in commits
34557f544/06dd4b44f. In principle it should also make the world safe
for running the TAP tests in the buildfarm in these branches; although
we might want to think about back-porting dcae5facca to 9.4 if
we're going to do that for real, because the TAP tests are quite disk
space hungry without it.
Michael Paquier did the back-porting work; original patches were by
him and assorted other people.
The sepgsql docs included a comment that PG doesn't support RLS. That
is only true for versions prior to 9.5.
Update the docs for 9.5 and master to say that PG supports RLS but that
sepgsql does not yet.
Pointed out by Heikki.
Back-patch to 9.5
Also fill in the previously empty "major enhancements" list. YMMV as to
which items should make the cut, but it's past time we had something more
than a placeholder here.
(I meant to get this done before beta2 was wrapped, but got distracted by
PDF build problems. Better late than never.)
These were discussed in three different sections of the manual, which
unsurprisingly had diverged over time; and the descriptions of individual
variables lacked stylistic consistency even within each section (and
frequently weren't in very good English anyway). Clean up the mess, and
remove some of the redundant information in hopes that future additions
will be less likely to re-introduce inconsistency. For instance I see
no need for maintenance.sgml to include its very own list of all the
autovacuum storage parameters, especially since that list was already
incomplete.
Commit 8457d0beca introduced an example which, while not incorrect,
failed to exhibit the behavior it meant to describe, as a result of omitting
an E'' prefix that needed to be there. Noticed and fixed by Peter Geoghegan.
I (tgl) failed to resist the temptation to wordsmith nearby text a bit
while at it.
In commit a5ec86a7c7 I wrote a quick hack
that reduced the number of TeX string pool entries created while converting
our documentation to PDF form. That held the fort for awhile, but as of
HEAD we're back up against the same limitation. It turns out that the
original coding of \FlowObjectSetup actually results in *three* string pool
entries being generated for every "flow object" (that is, potential
cross-reference target) in the documentation, and my previous hack only got
rid of one of them. With a little more care, we can reduce the string
count to one per flow object plus one per actually-cross-referenced flow
object (about 115000 + 5000 as of current HEAD); that should work until
the documentation volume roughly doubles from where it is today.
As a not-incidental side benefit, this change also causes pdfjadetex to
stop emitting unreferenced hyperlink anchors (bookmarks) into the PDF file.
It had been making one willy-nilly for every flow object; now it's just one
per actually-cross-referenced object. This results in close to a 2X
savings in PDF file size. We will still want to run the output through
"jpdftweak" to get it to be compressed; but we no longer need removal of
unreferenced bookmarks, so we might be able to find a quicker tool for
that step.
Although the failure only affects HEAD and US-format output at the moment,
9.5 cannot be more than a few pages short of failing likewise, so it
will inevitably fail after a few rounds of minor-version release notes.
I don't have a lot of faith that we'll never hit the limit in the older
branches; and anyway it would be nice to get rid of jpdftweak across the
board. Therefore, back-patch to all supported branches.
Per discussion, the original name was a bit misleading, and
PQsslAttributeNames() seems more apropos. It's not quite too late to
change this in 9.5, so let's change it while we can.
Also, make sure that the pointer array is const, not only the pointed-to
strings.
Minor documentation wordsmithing while at it.
Lars Kanis, slight adjustments by me
Up until now, the total amount of data that could be passed to a
background worker at startup was one datum, which can be a small as
4 bytes on some systems. That's enough to pass a dsm_handle or an
array index, but not much else. Add a bgw_extra flag to the
BackgroundWorker struct, allowing up to 128 bytes to be passed to
a new worker on any platform.
Use this to fix a problem I recently discovered with the parallel
context machinery added in 9.5: the master assigns each worker an
array index, and each worker subsequently assigns itself an array
index, and there's nothing to guarantee that the two sets of indexes
match, leading to chaos.
Normally, I would not back-patch the change to add bgw_extra, since it
is basically a feature addition. However, since 9.5 is still in beta
and there seems to be no other sensible way to repair the broken
parallel context machinery, back-patch to 9.5. Existing background
worker code can ignore the bgw_extra field without a problem, but
might need to be recompiled since the structure size has changed.
Report and patch by me. Review by Amit Kapila.
Standard-conforming literals have been the default for long enough that
it no longer seems necessary to go out of our way to tell people to write
regex escapes illegibly.
Fix some brain fade in commit a2dabf0e1d: erroneous variable names
in docs, rearrangements that made sentences less clear not more so,
undocumented and poorly-chosen-anyway API behaviors of subroutines,
bad grammar in error messages, copy-and-paste faults.
Albe Laurenz and Tom Lane
Show how this can be used in practice to make queries simpler and more
flexible. Also, draw an explicit contrast to the existence operator,
which doesn't work that way.
Peter Geoghegan and Tom Lane
This fixes a long-standing bug which was discovered while investigating
the interaction between the new join pushdown code and the EvalPlanQual
machinery: if a ForeignScan appears on the inner side of a paramaterized
nestloop, an EPQ recheck would re-return the original tuple even if
it no longer satisfied the pushed-down quals due to changed parameter
values.
This fix adds a new member to ForeignScan and ForeignScanState and a
new argument to make_foreignscan, and requires changes to FDWs which
push down quals to populate that new argument with a list of quals they
have chosen to push down. Therefore, I'm only back-patching to 9.5,
even though the bug is not new in 9.5.
Etsuro Fujita, reviewed by me and by Kyotaro Horiguchi.
In general one may have to run both REASSIGN OWNED and DROP OWNED to get
rid of all the dependencies of a role to be dropped. This was alluded to
in the REASSIGN OWNED man page, but not really spelled out in full; and in
any case the procedure ought to be documented in a more prominent place
than that. Add a section to the "Database Roles" chapter explaining this,
and do a bit of wordsmithing in the relevant commands' man pages.
Failure to perform garbage collection now has a user-visible effect, so
explain that and explain that reducing pgss_max is the way to prevent it.
Per gripe from Andrew Dunstan.
The documentation for the autovacuum_multixact_freeze_max_age and
autovacuum_freeze_max_age relation level parameters contained:
"Note that while you can set autovacuum_multixact_freeze_max_age very
small, or even zero, this is usually unwise since it will force frequent
vacuuming."
which hasn't been true since these options were made relation options,
instead of residing in the pg_autovacuum table (834a6da4f7).
Remove the outdated sentence. Even the lowered limits from 2596d70 are
high enough that this doesn't warrant calling out the risk in the CREATE
TABLE docs.
Per discussion with Tom Lane and Alvaro Herrera
Discussion: 26377.1443105453@sss.pgh.pa.us
Backpatch: 9.0- (in parts)
To allow users to force RLS to always be applied, even for table owners,
add ALTER TABLE .. FORCE ROW LEVEL SECURITY.
row_security=off overrides FORCE ROW LEVEL SECURITY, to ensure pg_dump
output is complete (by default).
Also add SECURITY_NOFORCE_RLS context to avoid data corruption when
ALTER TABLE .. FORCE ROW SECURITY is being used. The
SECURITY_NOFORCE_RLS security context is used only during referential
integrity checks and is only considered in check_enable_rls() after we
have already checked that the current user is the owner of the relation
(which should always be the case during referential integrity checks).
Back-patch to 9.5 where RLS was added.
Specifically, make its effect independent from the row_security GUC, and
make it affect permission checks pertinent to views the BYPASSRLS role
owns. The row_security GUC thereby ceases to change successful-query
behavior; it can only make a query fail with an error. Back-patch to
9.5, where BYPASSRLS was introduced.
