2PC state info is written only to WAL at PREPARE, then read back from WAL at
COMMIT PREPARED/ABORT PREPARED. Prepared transactions that live past one bufmgr
checkpoint cycle will be written to disk in the same form as previously. Crash
recovery path is not altered. Measured performance gains of 50-100% for short
2PC transactions by completely avoiding writing files and fsyncing. Other
optimizations still available, further patches in related areas expected.
Stas Kelvich and heavily edited by Simon Riggs
Based upon earlier ideas and patches by Michael Paquier and Heikki Linnakangas,
a concrete example of how Postgres-XC has fed back ideas into PostgreSQL.
Reviewed by Michael Paquier, Jeff Janes and Andres Freund
Performance testing by Jesper Pedersen
Previously we didn’t have a generic WAL page read callback function,
surprisingly. Logical decoding has logical_read_local_xlog_page(), which was
actually generic, so move that to xlogfunc.c and rename to
read_local_xlog_page().
Maintain logical_read_local_xlog_page() so existing callers still work.
As requested by Michael Paquier, Alvaro Herrera and Andres Freund
The core innovation of this patch is the introduction of the concept
of a partial path; that is, a path which if executed in parallel will
generate a subset of the output rows in each process. Gathering a
partial path produces an ordinary (complete) path. This allows us to
generate paths for parallel joins by joining a partial path for one
side (which at the baserel level is currently always a Partial Seq
Scan) to an ordinary path on the other side. This is subject to
various restrictions at present, especially that this strategy seems
unlikely to be sensible for merge joins, so only nested loops and
hash joins paths are generated.
This also allows an Append node to be pushed below a Gather node in
the case of a partitioned table.
Testing revealed that early versions of this patch made poor decisions
in some cases, which turned out to be caused by the fact that the
original cost model for Parallel Seq Scan wasn't very good. So this
patch tries to make some modest improvements in that area.
There is much more to be done in the area of generating good parallel
plans in all cases, but this seems like a useful step forward.
Patch by me, reviewed by Dilip Kumar and Amit Kapila.
Aggregate nodes now have two new modes: a "partial" mode where they
output the unfinalized transition state, and a "finalize" mode where
they accept unfinalized transition states rather than individual
values as input.
These new modes are not used anywhere yet, but they will be necessary
for parallel aggregation. The infrastructure also figures to be
useful for cases where we want to aggregate local data and remote
data via the FDW interface, and want to bring back partial aggregates
from the remote side that can then be combined with locally generated
partial aggregates to produce the final value. It may also be useful
even when neither FDWs nor parallelism are in play, as explained in
the comments in nodeAgg.c.
David Rowley and Simon Riggs, reviewed by KaiGai Kohei, Heikki
Linnakangas, Haribabu Kommi, and me.
This will enable PL/Java to be cleanly compiled, as dynloader.h is a
requirement.
Report by Chapman Flack
Patch by Michael Paquier
Backpatch through 9.1
GIN had some minor issues too, mostly using "internal" where something
else would be more appropriate. I went with the same approach as in
9ff60273e3, namely preferring the opclass' indexed datatype for
arguments that receive an operator RHS value, even if that's not
necessarily what they really are.
Again, this is with an eye to having a uniform rule for ginvalidate()
to check support function signatures.
The conventions specified by the GiST SGML documentation were widely
ignored. For example, the strategy-number argument for "consistent" and
"distance" functions is specified to be a smallint, but most of the
built-in support functions declared it as an integer, and for that matter
the core code passed it using Int32GetDatum not Int16GetDatum. None of
that makes any real difference at runtime, but it's quite confusing for
newcomers to the code, and it makes it very hard to write an amvalidate()
function that checks support function signatures. So let's try to instill
some consistency here.
Another similar issue is that the "query" argument is not of a single
well-defined type, but could have different types depending on the strategy
(corresponding to search operators with different righthand-side argument
types). Some of the functions threw up their hands and declared the query
argument as being of "internal" type, which surely isn't right ("any" would
have been more appropriate); but the majority position seemed to be to
declare it as being of the indexed data type, corresponding to a search
operator with both input types the same. So I've specified a convention
that that's what to do always.
Also, the result of the "union" support function actually must be of the
index's storage type, but the documentation suggested declaring it to
return "internal", and some of the functions followed that. Standardize
on telling the truth, instead.
Similarly, standardize on declaring the "same" function's inputs as
being of the storage type, not "internal".
Also, somebody had forgotten to add the "recheck" argument to both
the documentation of the "distance" support function and all of their
SQL declarations, even though the C code was happily using that argument.
Clean that up too.
Fix up some other omissions in the docs too, such as documenting that
union's second input argument is vestigial.
So far as the errors in core function declarations go, we can just fix
pg_proc.h and bump catversion. Adjusting the erroneous declarations in
contrib modules is more debatable: in principle any change in those
scripts should involve an extension version bump, which is a pain.
However, since these changes are purely cosmetic and make no functional
difference, I think we can get away without doing that.
This code has been there for a long time, but it's never really been
needed. Cygwin has its own utility for registering, unregistering,
stopping and starting Windows services, and that's what's used in the
Cygwin postgres packages. So now pg_ctl for Cygwin looks like it is for
any Unix platform.
Michael Paquier and me
This patch reduces pg_am to just two columns, a name and a handler
function. All the data formerly obtained from pg_am is now provided
in a C struct returned by the handler function. This is similar to
the designs we've adopted for FDWs and tablesample methods. There
are multiple advantages. For one, the index AM's support functions
are now simple C functions, making them faster to call and much less
error-prone, since the C compiler can now check function signatures.
For another, this will make it far more practical to define index access
methods in installable extensions.
A disadvantage is that SQL-level code can no longer see attributes
of index AMs; in particular, some of the crosschecks in the opr_sanity
regression test are no longer possible from SQL. We've addressed that
by adding a facility for the index AM to perform such checks instead.
(Much more could be done in that line, but for now we're content if the
amvalidate functions more or less replace what opr_sanity used to do.)
We might also want to expose some sort of reporting functionality, but
this patch doesn't do that.
Alexander Korotkov, reviewed by Petr Jelínek, and rather heavily
editorialized on by me.
Coverity quite reasonably complained that this check for fout==NULL
occurred after we'd already dereferenced fout. However, the check
is just dead code since there is no code path by which CreateArchive
can return a null pointer. Errors such as can't-open-that-file are
reported down inside CreateArchive, and control doesn't return.
So let's silence the warning by removing the dead code, rather than
continuing to pretend it does something.
Coverity didn't complain about this before 5b5fea2a1, so back-patch
to 9.5 like that patch.
There's no good reason for stomping on the input data; it makes the logic
in this function no simpler, in fact probably the reverse. And it makes
it impossible to separate path generation from plan generation, as I'm
working towards doing; that will require more than one traversal of these
lists.
We can never leak more than one token, but we shouldn't do that. We
don't bother closing it in the error paths since the process will
exit shortly anyway.
Christian Ullrich
pg_dump's original approach to handling extension member objects was to
run around and clear (or set) their dump flags rather late in its data
collection process. Unfortunately, quite a lot of code expects those flags
to be valid before that; which was an entirely reasonable expectation
before we added extensions. In particular, this explains Karsten Hilbert's
recent report of pg_upgrade failing on a database in which an extension
has been installed into the pg_catalog schema. Its objects are initially
marked as not-to-be-dumped on the strength of their schema, and later we
change them to must-dump because we're doing a binary upgrade of their
extension; but we've already skipped essential tasks like making associated
DO_SHELL_TYPE objects.
To fix, collect extension membership data first, and incorporate it in the
initial setting of the dump flags, so that those are once again correct
from the get-go. This has the undesirable side effect of slightly
lengthening the time taken before pg_dump acquires table locks, but testing
suggests that the increase in that window is not very much.
Along the way, get rid of ugly special-case logic for deciding whether
to dump procedural languages, FDWs, and foreign servers; dump decisions
for those are now correct up-front, too.
In 9.3 and up, this also fixes erroneous logic about when to dump event
triggers (basically, they were *always* dumped before). In 9.5 and up,
transform objects had that problem too.
Since this problem came in with extensions, back-patch to all supported
versions.
Rather than passing around DumpOptions and RestoreOptions as separate
arguments, add fields to struct Archive to carry pointers to these objects,
and access them through those fields when needed. There already was a
RestoreOptions pointer in Archive, though for no obvious reason it was part
of the "private" struct rather than out where pg_dump.c could see it.
Doing this allows reversion of quite a lot of parameter-addition changes
made in commit 0eea8047bf, which is a good thing IMO because this will
reduce the code delta between 9.4 and 9.5, probably easing a few future
back-patch efforts. Moreover, the previous commit only added a DumpOptions
argument to functions that had to have it at the time, which means we could
anticipate still more code churn (and more back-patch hazard) as the
requirement spread further. I'd hit exactly that problem in my upcoming
patch to fix extension membership marking, which is what motivated me to
do this.
The completion of CREATE INDEX CONCURRENTLY was lacking in several ways
compared to a plain CREATE INDEX command:
- CREATE INDEX <name> ON completes table names, but didn't with
CONCURRENTLY.
- CREATE INDEX completes ON and existing index names, but with
CONCURRENTLY it only completed ON.
- CREATE INDEX <name> completes ON, but didn't with CONCURRENTLY.
These are now all fixed.
The previous code supported a syntax like CREATE INDEX name
CONCURRENTLY, which never existed. Mistake introduced in commit
37ec19a15c. Remove the addition of
CONCURRENTLY at that point.
Commit 866566a690 introduced a new mechanism for incompatible
plpythons to detect each other. I left the old mechanism in place,
because it seems possible that a plpython predating that commit might be
used with one postdating it. (This would require updating plpython3 but
not plpython2 or vice versa, but that seems well within the realm of
possibility.) However, surely it will not be able to happen in 9.6 or
later, so we can delete the old mechanism in HEAD.
Commit 866566a690 is insufficient to prevent dump/reload failures
when using transform modules in a database with both plpython2 and
plpython3 installed. The reason is that the transform extension scripts
use DO blocks as a mechanism to pull in the libpython library before
creating the transform function. It's necessary to preload the library
because the dynamic loader won't do it for us on every platform, leading
to "unresolved symbol" failures when the transform library is loaded.
But it's *not* necessary to execute Python code, and doing so will
provoke a multiple-Pythons-are-loaded error even after the preceding
commit.
To fix, use LOAD instead of a DO block. That requires superuser privilege,
but creation of a C function does anyway. It also embeds knowledge of
the underlying library name for each PL language; but that's wired into
the initdb-time contents of pg_pltemplate too, so that doesn't seem like
a large problem either. Note that CREATE TRANSFORM as such doesn't call
the language module at all.
Per a report from Paul Jones. Back-patch to 9.5 where transform modules
were introduced.
Commit 803716013d installed a safeguard against loading plpython2
and plpython3 at the same time, but asserted that both could still be
used in the same database, just not in the same session. However, that's
not actually all that practical because dumping and reloading will fail
(since both libraries necessarily get loaded into the restoring session).
pg_upgrade is even worse, because it checks for missing libraries by
loading every .so library mentioned in the entire installation into one
session, so that you can have only one across the whole cluster.
We can improve matters by not throwing the error immediately in _PG_init,
but only when and if we're asked to do something that requires calling
into libpython. This ameliorates both of the above situations, since
while execution of CREATE LANGUAGE, CREATE FUNCTION, etc will result in
loading plpython, it isn't asked to do anything interesting (at least
not if check_function_bodies is off, as it will be during a restore).
It's possible that this opens some corner-case holes in which a crash
could be provoked with sufficient effort. However, since plpython
only exists as an untrusted language, any such crash would require
superuser privileges, making it "don't do that" not a security issue.
To reduce the hazards in this area, the error is still FATAL when it
does get thrown.
Per a report from Paul Jones. Back-patch to 9.2, which is as far back
as the patch applies without work. (It could be made to work in 9.1,
but given the lack of previous complaints, I'm disinclined to expend
effort so far back. We've been pretty desultory about support for
Python 3 in 9.1 anyway.)
This loop uselessly fetched the argument after the one it's currently
looking at. No real harm is done since we couldn't possibly fetch off
the end of memory, but it's confusing to the reader.
Also remove a duplicate (and therefore confusing) PG_ARGISNULL check in
jsonb_build_object.
I happened to notice these things while trolling for missed null-arg
checks earlier today. Back-patch to 9.5, not because there is any
real bug, but just because 9.5 and HEAD are still in sync in this
file and we might as well keep them so.
In passing, re-pgindent.
I noticed that the sanity checks in the regression tests omitted to
check a couple of "poor man's enum" columns that you'd reasonably
expect them to check.
There are other "char"-type columns in system catalogs that are not
covered by either type_sanity or opr_sanity, e.g. pg_rewrite.ev_type.
However, those catalogs are not populated with any manually-created
data during bootstrap, so it seems less necessary to check them
this way.
A scan for missed proisstrict markings in the core code turned up
these functions:
brin_summarize_new_values
pg_stat_reset_single_table_counters
pg_stat_reset_single_function_counters
pg_create_logical_replication_slot
pg_create_physical_replication_slot
pg_drop_replication_slot
The first three of these take OID, so a null argument will normally look
like a zero to them, resulting in "ERROR: could not open relation with OID
0" for brin_summarize_new_values, and no action for the pg_stat_reset_XXX
functions. The other three will dump core on a null argument, though this
is mitigated by the fact that they won't do so until after checking that
the caller is superuser or has rolreplication privilege.
In addition, the pg_logical_slot_get/peek[_binary]_changes family was
intentionally marked nonstrict, but failed to make nullness checks on all
the arguments; so again a null-pointer-dereference crash is possible but
only for superusers and rolreplication users.
Add the missing ARGISNULL checks to the latter functions, and mark the
former functions as strict in pg_proc. Make that change in the back
branches too, even though we can't force initdb there, just so that
installations initdb'd in future won't have the issue. Since none of these
bugs rise to the level of security issues (and indeed the pg_stat_reset_XXX
functions hardly misbehave at all), it seems sufficient to do this.
In addition, fix some order-of-operations oddities in the slot_get_changes
family, mostly cosmetic, but not the part that moves the function's last
few operations into the PG_TRY block. As it stood, there was significant
risk for an error to exit without clearing historical information from
the system caches.
The slot_get_changes bugs go back to 9.4 where that code was introduced.
Back-patch appropriate subsets of the pg_proc changes into all active
branches, as well.
Given syntactically wrong input, widget_in() could call atof() with an
indeterminate pointer argument, typically leading to a crash; or if it
didn't do that, it might return a NULL pointer, which again would lead
to a crash since old-style C functions aren't supposed to do things
that way. Fix that by correcting the off-by-one syntax test and
throwing a proper error rather than just returning NULL.
Also, since widget_in and widget_out have been marked STRICT for a
long time, their tests for null inputs are just dead code; remove 'em.
In the oldest branches, also improve widget_out to use snprintf not
sprintf, just to be sure.
In passing, get rid of a long-since-useless sprintf into a local buffer
that nothing further is done with, and make some other minor coding
style cleanups.
In the intended regression-testing usage of these functions, none of
this is very significant; but if the regression test database were
left around in a production installation, these bugs could amount
to a minor security hazard.
Piotr Stefaniak, Michael Paquier, and Tom Lane
These functions readily crash when passed a NULL input value. The tests
themselves do not pass NULL values to them; but when the regression
database is used as a basis for fuzz testing, they cause a lot of noise.
Also, if someone were to leave a regression database lying about in a
production installation, these would create a minor security hazard.
Andreas Seltenreich
Replay of XLOG_BTREE_VACUUM during Hot Standby was previously thought to require
complex interlocking that matched the requirements on the master. This required
an O(N) operation that became a significant problem with large indexes, causing
replication delays of seconds or in some cases minutes while the
XLOG_BTREE_VACUUM was replayed.
This commit skips the “pin scan” that was previously required, by observing in
detail when and how it is safe to do so, with full documentation. The pin scan
is skipped only in replay; the VACUUM code path on master is not touched here.
The current commit still performs the pin scan for toast indexes, though this
can also be avoided if we recheck scans on toast indexes. Later patch will
address this.
No tests included. Manual tests using an additional patch to view WAL records
and their timing have shown the change in WAL records and their handling has
successfully reduced replication delay.
Further portability fix for a967613911. Mingw- and MSVC-based builds
appear to be working fine, but Cygwin needs an extra tweak whereby the
new win32security.c file is explicitely added to the list of files to
build in pgport, per Cygwin members brolga and lorikeet.
Author: Michael Paquier
Improve comments and make it a shade less messy. I think we might want
to move all of this somewhere else later, but it needs to be more
readable first.
In passing, re-pgindent the file, affecting some recently-added comments
concerning parallel query planning.
Once upon a time it was necessary for grouping_planner() to determine
the tlist it wanted from the scan/join plan subtree before it called
query_planner(), because query_planner() would actually make a Plan using
that. But we refactored things a long time ago to delay construction of
the Plan tree till later, so there's no need to build that tlist until
(and indeed unless) we're ready to plaster it onto the Plan. The only
thing query_planner() cares about is what Vars are going to be needed for
the tlist, and it can perfectly well get that by looking at the real tlist
rather than some masticated version.
Well, actually, there is one minor glitch in that argument, which is that
make_subplanTargetList also adds Vars appearing only in HAVING to the
tlist it produces. So now we have to account for HAVING explicitly in
build_base_rel_tlists. But that just adds a few lines of code, and
I doubt it moves the needle much on processing time; we might be doing
pull_var_clause() twice on the havingQual, but before we had it scanning
dummy tlist entries instead.
This is a very small down payment on rationalizing grouping_planner
enough so it can be refactored.
Turns out the only reason initdb -X worked is that pg_mkdir_p won't
whine if you point it at something that's a symlink to a directory.
Otherwise, the attempt to create pg_xlog/ just like all the other
subdirectories would have failed. Let's be a little more explicit
about what's happening. Oversight in my patch for bug #13853
(mea culpa for not testing -X ...)
Simon Riggs
Peter Eisentraut
Robert Haas
Alvaro Herrera
Bruce Momjian
Tom Lane
Andrew Dunstan
Tatsuo Ishii
Magnus Hagander