To take an incremental backup, you use the new replication command
UPLOAD_MANIFEST to upload the manifest for the prior backup. This
prior backup could either be a full backup or another incremental
backup. You then use BASE_BACKUP with the INCREMENTAL option to take
the backup. pg_basebackup now has an --incremental=PATH_TO_MANIFEST
option to trigger this behavior.
An incremental backup is like a regular full backup except that
some relation files are replaced with files with names like
INCREMENTAL.${ORIGINAL_NAME}, and the backup_label file contains
additional lines identifying it as an incremental backup. The new
pg_combinebackup tool can be used to reconstruct a data directory
from a full backup and a series of incremental backups.
Patch by me. Reviewed by Matthias van de Meent, Dilip Kumar, Jakub
Wartak, Peter Eisentraut, and Álvaro Herrera. Thanks especially to
Jakub for incredibly helpful and extensive testing.
Discussion: http://postgr.es/m/CA+TgmoYOYZfMCyOXFyC-P+-mdrZqm5pP2N7S-r0z3_402h9rsA@mail.gmail.com
Commit c6f2f01611 purported to make
this work, but problems remained. In a plain-format backup, the
files from an in-place tablespace got included in the tar file for
the main tablespace, which is wrong but it's not clear that it
has any user-visible consequences. In a tar-format backup, the
TABLESPACE_MAP option is used, and so we never iterated over
pg_tblspc and thus never backed up the in-place tablespaces
anywhere at all.
To fix this, reverse the changes in that commit, so that when we scan
pg_tblspc during a backup, we create tablespaceinfo objects even for
in-place tablespaces. We set the field that would normally contain the
absolute pathname to the relative path pg_tblspc/${TSOID}, and that's
good enough to make basebackup.c happy without any further changes.
However, pg_basebackup needs a couple of adjustments to make it work.
First, it needs to understand that a relative path for a tablespace
means it's an in-place tablespace. Second, it needs to tolerate the
situation where restoring the main tablespace tries to create
pg_tblspc or a subdirectory and finds that it already exists, because
we restore user-defined tablespaces before the main tablespace.
Since in-place tablespaces are only intended for use in development
and testing, no back-patch.
Patch by me, reviewed by Thomas Munro and Michael Paquier.
Discussion: http://postgr.es/m/CA+TgmobwvbEp+fLq2PykMYzizcvuNv0a7gPMJtxOTMOuuRLMHg@mail.gmail.com
Get rid of the separate "FATAL" log level, as it was applied
so inconsistently as to be meaningless. This mostly involves
s/pg_log_fatal/pg_log_error/g.
Create a macro pg_fatal() to handle the common use-case of
pg_log_error() immediately followed by exit(1). Various
modules had already invented either this or equivalent macros;
standardize on pg_fatal() and apply it where possible.
Invent the ability to add "detail" and "hint" messages to a
frontend message, much as we have long had in the backend.
Except where rewording was needed to convert existing coding
to detail/hint style, I have (mostly) resisted the temptation
to change existing message wording.
Patch by me. Design and patch reviewed at various stages by
Robert Haas, Kyotaro Horiguchi, Peter Eisentraut and
Daniel Gustafsson.
Discussion: https://postgr.es/m/1363732.1636496441@sss.pgh.pa.us
If you have a low-bandwidth connection between the client and the
server, it's reasonable to want to compress on the server side but
then decompress and extract the backup on the client side. This
commit allows you do to do just that.
Dipesh Pandit, with minor and mostly cosmetic changes by me.
Discussion: http://postgr.es/m/CAN1g5_HiSh8ajUMd4ePtGyCXo89iKZTzaNyzP_qv1eJbi4YHXA@mail.gmail.com
Coverity complained that applying get_gz_error after a failed gzclose,
as we did in one place in pg_basebackup, is unsafe. I think it's
right: it's entirely likely that the call is touching freed memory.
Change that to inspect errno, as we do for other gzclose calls.
Also, be careful to initialize errno to zero immediately before any
gzclose() call where we care about the error status. (There are
some calls where we don't, because we already failed at some previous
step.) This ensures that we don't get a misleadingly irrelevant
error code if gzclose() fails in a way that doesn't set errno.
We could work harder at that, but it looks to me like all such cases
are basically can't-happen if we're not misusing zlib, so it's
not worth the extra notational cruft that would be required.
Also, fix several places that simply failed to check for close-time
errors at all, mostly at some remove from the close or gzclose itself;
and one place that did check but didn't bother to report the errno.
Back-patch to v12. These mistakes are older than that, but between
the frontend logging API changes that happened in v12 and the fact
that frontend code can't rely on %m before that, the patch would need
substantial revision to work in older branches. It doesn't quite
seem worth the trouble given the lack of related field complaints.
Patch by me; thanks to Michael Paquier for review.
Discussion: https://postgr.es/m/1343113.1636489231@sss.pgh.pa.us
pg_basebackup knows how to do quite a few things with a backup that it
gets from the server, like just write out the files, or compress them
first, or even parse the tar format and inject a modified
postgresql.auto.conf file into the archive generated by the server.
Unforatunely, this makes pg_basebackup.c a very large source file, and
also somewhat difficult to enhance, because for example the knowledge
that the server is sending us a 'tar' file rather than some other sort
of archive is spread all over the place rather than centralized.
In an effort to improve this situation, this commit invents a new
'bbstreamer' abstraction. Each archive received from the server is
fed to a bbstreamer which may choose to dispose of it or pass it
along to some other bbstreamer. Chunks may also be "labelled"
according to whether they are part of the payload data of a file
in the archive or part of the archive metadata.
So, for example, if we want to take a tar file, modify the
postgresql.auto.conf file it contains, and the gzip the result
and write it out, we can use a bbstreamer_tar_parser to parse the
tar file received from the server, a bbstreamer_recovery_injector
to modify the contents of postgresql.auto.conf, a
bbstreamer_tar_archiver to replace the tar headers for the file
modified in the previous step with newly-built ones that are
correct for the modified file, and a bbstreamer_gzip_writer to
gzip and write the resulting data. Only the objects with "tar"
in the name know anything about the tar archive format, and in
theory we could re-archive using some other format rather than
"tar" if somebody wanted to write the code.
These chances do add a substantial amount of code, but I think the
result is a lot more maintainable and extensible. pg_basebackup.c
itself shrinks by roughly a third, with a lot of the complexity
previously contained there moving into the newly-added files.
Patch by me. The larger patch series of which this is a part has been
reviewed and tested at various times by Andres Freund, Sumanta
Mukherjee, Dilip Kumar, Suraj Kharage, Dipesh Pandit, Tushar Ahuja,
Mark Dilger, Sergei Kornilov, and Jeevan Ladhe.
Discussion: https://postgr.es/m/CA+TgmoZGwR=ZVWFeecncubEyPdwghnvfkkdBe9BLccLSiqdf9Q@mail.gmail.com
Discussion: https://postgr.es/m/CA+TgmoZvqk7UuzxsX1xjJRmMGkqoUGYTZLDCH8SmU1xTPr1Xig@mail.gmail.com
Peter Eisentraut
Bruce Momjian
Robert Haas
Tom Lane
Tomas Vondra