The planner largely failed to consider the possibility that a
PlaceHolderVar's expression might contain a lateral reference to a Var
coming from somewhere outside the PHV's syntactic scope. We had a previous
report of a problem in this area, which I tried to fix in a quick-hack way
in commit 4da6439bd8, but Antonin Houska
pointed out that there were still some problems, and investigation turned
up other issues. This patch largely reverts that commit in favor of a more
thoroughly thought-through solution. The new theory is that a PHV's
ph_eval_at level cannot be higher than its original syntactic level. If it
contains lateral references, those don't change the ph_eval_at level, but
rather they create a lateral-reference requirement for the ph_eval_at join
relation. The code in joinpath.c needs to handle that.
Another issue is that createplan.c wasn't handling nested PlaceHolderVars
properly.
In passing, push knowledge of lateral-reference checks for join clauses
into join_clause_is_movable_to. This is mainly so that FDWs don't need
to deal with it.
This patch doesn't fix the original join-qual-placement problem reported by
Jeremy Evans (and indeed, one of the new regression test cases shows the
wrong answer because of that). But the PlaceHolderVar problems need to be
fixed before that issue can be addressed, so committing this separately
seems reasonable.
Formerly, query_planner returned one or possibly two Paths for the topmost
join relation, so that grouping_planner didn't see the join RelOptInfo
(at least not directly; it didn't have any hesitation about examining
cheapest_path->parent, though). However, correct selection of the Paths
involved a significant amount of coupling between query_planner and
grouping_planner, a problem which has gotten worse over time. It seems
best to give up on this API choice and instead return the topmost
RelOptInfo explicitly. Then grouping_planner can pull out the Paths it
wants from the rel's path list. In this way we can remove all knowledge
of grouping behaviors from query_planner.
The only real benefit of the old way is that in the case of an empty
FROM clause, we never made any RelOptInfos at all, just a Path. Now
we have to gin up a dummy RelOptInfo to represent the empty FROM clause.
That's not a very big deal though.
While at it, simplify query_planner's API a bit more by having the caller
set up root->tuple_fraction and root->limit_tuples, rather than passing
those values as separate parameters. Since query_planner no longer does
anything with either value, requiring it to fill the PlannerInfo fields
seemed pretty arbitrary.
This patch just rearranges code; it doesn't (intentionally) change any
behaviors. Followup patches will do more interesting things.
The planner previously assumed that parameter Vars having the same absolute
query level, varno, and varattno could safely be assigned the same runtime
PARAM_EXEC slot, even though they might be different Vars appearing in
different subqueries. This was (probably) safe before the introduction of
CTEs, but the lazy-evalution mechanism used for CTEs means that a CTE can
be executed during execution of some other subquery, causing the lifespan
of Params at the same syntactic nesting level as the CTE to overlap with
use of the same slots inside the CTE. In 9.1 we created additional hazards
by using the same parameter-assignment technology for nestloop inner scan
parameters, but it was broken before that, as illustrated by the added
regression test.
To fix, restructure the planner's management of PlannerParamItems so that
items having different semantic lifespans are kept rigorously separated.
This will probably result in complex queries using more runtime PARAM_EXEC
slots than before, but the slots are cheap enough that this hardly matters.
Also, stop generating PlannerParamItems containing Params for subquery
outputs: all we really need to do is reserve the PARAM_EXEC slot number,
and that now only takes incrementing a counter. The planning code is
simpler and probably faster than before, as well as being more correct.
Per report from Vik Reykja.
These changes will mostly also need to be made in the back branches, but
I'm going to hold off on that until after 9.2.0 wraps.
We can detect whether the planner top level is going to care at all about
cheap startup cost (it will only do so if query_planner's tuple_fraction
argument is greater than zero). If it isn't, we might as well discard
paths immediately whose only advantage over others is cheap startup cost.
This turns out to get rid of quite a lot of paths in complex queries ---
I saw planner runtime reduction of more than a third on one large query.
Since add_path isn't currently passed the PlannerInfo "root", the easiest
way to tell it whether to do this was to add a bool flag to RelOptInfo.
That's a bit redundant, since all relations in a given query level will
have the same setting. But in the future it's possible that we'd refine
the control decision to work on a per-relation basis, so this seems like
a good arrangement anyway.
Per my suggestion of a few months ago.
This patch takes care of a number of problems having to do with failure
to choose valid join orders and incorrect handling of lateral references
pulled up from subqueries. Notable changes:
* Add a LateralJoinInfo data structure similar to SpecialJoinInfo, to
represent join ordering constraints created by lateral references.
(I first considered extending the SpecialJoinInfo structure, but the
semantics are different enough that a separate data structure seems
better.) Extend join_is_legal() and related functions to prevent trying
to form unworkable joins, and to ensure that we will consider joins that
satisfy lateral references even if the joins would be clauseless.
* Fill in the infrastructure needed for the last few types of relation scan
paths to support parameterization. We'd have wanted this eventually
anyway, but it is necessary now because a relation that gets pulled up out
of a UNION ALL subquery may acquire a reltargetlist containing lateral
references, meaning that its paths *have* to be parameterized whether or
not we have any code that can push join quals down into the scan.
* Compute data about lateral references early in query_planner(), and save
in RelOptInfo nodes, to avoid repetitive calculations later.
* Assorted corner-case bug fixes.
There's probably still some bugs left, but this is a lot closer to being
real than it was before.
This patch adjusts the treatment of parameterized paths so that all paths
with the same parameterization (same set of required outer rels) for the
same relation will have the same rowcount estimate. We cache the rowcount
estimates to ensure that property, and hopefully save a few cycles too.
Doing this makes it practical for add_path_precheck to operate without
a rowcount estimate: it need only assume that paths with different
parameterizations never dominate each other, which is close enough to
true anyway for coarse filtering, because normally a more-parameterized
path should yield fewer rows thanks to having more join clauses to apply.
In add_path, we do the full nine yards of comparing rowcount estimates
along with everything else, so that we can discard parameterized paths that
don't actually have an advantage. This fixes some issues I'd found with
add_path rejecting parameterized paths on the grounds that they were more
expensive than not-parameterized ones, even though they yielded many fewer
rows and hence would be cheaper once subsequent joining was considered.
To make the same-rowcounts assumption valid, we have to require that any
parameterized path enforce *all* join clauses that could be obtained from
the particular set of outer rels, even if not all of them are useful for
indexing. This is required at both base scans and joins. It's a good
thing anyway since the net impact is that join quals are checked at the
lowest practical level in the join tree. Hence, discard the original
rather ad-hoc mechanism for choosing parameterization joinquals, and build
a better one that has a more principled rule for when clauses can be moved.
The original rule was actually buggy anyway for lack of knowledge about
which relations are part of an outer join's outer side; getting this right
requires adding an outer_relids field to RestrictInfo.
Further reflection shows that a single callback isn't very workable if we
desire to let FDWs generate multiple Paths, because that forces the FDW to
do all work necessary to generate a valid Plan node for each Path. Instead
split the former PlanForeignScan API into three steps: GetForeignRelSize,
GetForeignPaths, GetForeignPlan. We had already bit the bullet of breaking
the 9.1 FDW API for 9.2, so this shouldn't cause very much additional pain,
and it's substantially more flexible for complex FDWs.
Add an fdw_private field to RelOptInfo so that the new functions can save
state there rather than possibly having to recalculate information two or
three times.
In addition, we'd not thought through what would be needed to allow an FDW
to set up subexpressions of its choice for runtime execution. We could
treat ForeignScan.fdw_private as an executable expression but that seems
likely to break existing FDWs unnecessarily (in particular, it would
restrict the set of node types allowable in fdw_private to those supported
by expression_tree_walker). Instead, invent a separate field fdw_exprs
which will receive the postprocessing appropriate for expression trees.
(One field is enough since it can be a list of expressions; also, we assume
the corresponding expression state tree(s) will be held within fdw_state,
so we don't need to add anything to ForeignScanState.)
Per review of Hanada Shigeru's pgsql_fdw patch. We may need to tweak this
further as we continue to work on that patch, but to me it feels a lot
closer to being right now.
This patch fixes the planner so that it can generate nestloop-with-
inner-indexscan plans even with one or more levels of joining between
the indexscan and the nestloop join that is supplying the parameter.
The executor was fixed to handle such cases some time ago, but the
planner was not ready. This should improve our plans in many situations
where join ordering restrictions formerly forced complete table scans.
There is probably a fair amount of tuning work yet to be done, because
of various heuristics that have been added to limit the number of
parameterized paths considered. However, we are not going to find out
what needs to be adjusted until the code gets some real-world use, so
it's time to get it in there where it can be tested easily.
Note API change for index AM amcostestimate functions. I'm not aware of
any non-core index AMs, but if there are any, they will need minor
adjustments.
Add a column pg_class.relallvisible to remember the number of pages that
were all-visible according to the visibility map as of the last VACUUM
(or ANALYZE, or some other operations that update pg_class.relpages).
Use relallvisible/relpages, instead of an arbitrary constant, to estimate
how many heap page fetches can be avoided during an index-only scan.
This is pretty primitive and will no doubt see refinements once we've
acquired more field experience with the index-only scan mechanism, but
it's way better than using a constant.
Note: I had to adjust an underspecified query in the window.sql regression
test, because it was changing answers when the plan changed to use an
index-only scan. Some of the adjacent tests perhaps should be adjusted
as well, but I didn't do that here.
Formerly, set_subquery_pathlist and other creators of plans for subqueries
saved only the rangetable and rowMarks lists from the lower-level
PlannerInfo. But there's no reason not to remember the whole PlannerInfo,
and indeed this turns out to simplify matters in a number of places.
The immediate reason for doing this was so that the subroot will still be
accessible when we're trying to extract column statistics out of an
already-planned subquery. But now that I've done it, it seems like a good
code-beautification effort in its own right.
I also chose to get rid of the transient subrtable and subrowmark fields in
SubqueryScan nodes, in favor of having setrefs.c look up the subquery's
RelOptInfo. That required changing all the APIs in setrefs.c to pass
PlannerInfo not PlannerGlobal, which was a large but quite mechanical
transformation.
One side-effect not foreseen at the beginning is that this finally broke
inheritance_planner's assumption that replanning the same subquery RTE N
times would necessarily give interchangeable results each time. That
assumption was always pretty risky, but now we really have to make a
separate RTE for each instance so that there's a place to carry the
separate subroots.
by adding a requirement that build_join_rel add new join RelOptInfos to the
appropriate list immediately at creation. Per report from Robert Haas,
the list_concat_unique_ptr() calls that this change eliminates were taking
the lion's share of the runtime in larger join problems. This doesn't do
anything to fix the fundamental combinatorial explosion in large join
problems, but it should push out the threshold of pain a bit further.
Note: because this changes the order in which joinrel lists are built,
it might result in changes in selected plans in cases where different
alternatives have exactly the same costs. There is one example in the
regression tests.
execMain.c and into a new plan node type LockRows. Like the recent change
to put table updating into a ModifyTable plan node, this increases planning
flexibility by allowing the operations to occur below the top level of the
plan tree. It's necessary in any case to restore the previous behavior of
having FOR UPDATE locking occur before ModifyTable does.
This partially refactors EvalPlanQual to allow multiple rows-under-test
to be inserted into the EPQ machinery before starting an EPQ test query.
That isn't sufficient to fix EPQ's general bogosity in the face of plans
that return multiple rows per test row, though. Since this patch is
mostly about getting some plan node infrastructure in place and not about
fixing ten-year-old bugs, I will leave EPQ improvements for another day.
Another behavioral change that we could now think about is doing FOR UPDATE
before LIMIT, but that too seems like it should be treated as a followon
patch.
that represent some expression that we desire to compute below the top level
of the plan, and then let that value "bubble up" as though it were a plain
Var (ie, a column value).
The immediate application is to allow sub-selects to be flattened even when
they are below an outer join and have non-nullable output expressions.
Formerly we couldn't flatten because such an expression wouldn't properly
go to NULL when evaluated above the outer join. Now, we wrap it in a
PlaceHolderVar and arrange for the actual evaluation to occur below the outer
join. When the resulting Var bubbles up through the join, it will be set to
NULL if necessary, yielding the correct results. This fixes a planner
limitation that's existed since 7.1.
In future we might want to use this mechanism to re-introduce some form of
Hellerstein's "expensive functions" optimization, ie place the evaluation of
an expensive function at the most suitable point in the plan tree.
There are some unimplemented aspects: recursive queries must use UNION ALL
(should allow UNION too), and we don't have SEARCH or CYCLE clauses.
These might or might not get done for 8.4, but even without them it's a
pretty useful feature.
There are also a couple of small loose ends and definitional quibbles,
which I'll send a memo about to pgsql-hackers shortly. But let's land
the patch now so we can get on with other development.
Yoshiyuki Asaba, with lots of help from Tatsuo Ishii and Tom Lane
the old JOIN_IN code, but antijoins are new functionality.) Teach the planner
to convert appropriate EXISTS and NOT EXISTS subqueries into semi and anti
joins respectively. Also, LEFT JOINs with suitable upper-level IS NULL
filters are recognized as being anti joins. Unify the InClauseInfo and
OuterJoinInfo infrastructure into "SpecialJoinInfo". With that change,
it becomes possible to associate a SpecialJoinInfo with every join attempt,
which permits some cleanup of join selectivity estimation. That needs to be
taken much further than this patch does, but the next step is to change the
API for oprjoin selectivity functions, which seems like material for a
separate patch. So for the moment the output size estimates for semi and
especially anti joins are quite bogus.
are mostly excluded by constraints: do the CE test a bit earlier to save
some adjust_appendrel_attrs() work on excluded children, and arrange to
use array indexing rather than rt_fetch() to fetch RTEs in the main body
of the planner. The latter is something I'd wanted to do for awhile anyway,
but seeing list_nth_cell() as 35% of the runtime gets one's attention.
useless substructure for its RangeTblEntry nodes. (I chose to keep using the
same struct node type and just zero out the link fields for unneeded info,
rather than making a separate ExecRangeTblEntry type --- it seemed too
fragile to have two different rangetable representations.)
Along the way, put subplans into a list in the toplevel PlannedStmt node,
and have SubPlan nodes refer to them by list index instead of direct pointers.
Vadim wanted to do that years ago, but I never understood what he was on about
until now. It makes things a *whole* lot more robust, because we can stop
worrying about duplicate processing of subplans during expression tree
traversals. That's been a constant source of bugs, and it's finally gone.
There are some consequent simplifications yet to be made, like not using
a separate EState for subplans in the executor, but I'll tackle that later.
representation of equivalence classes of variables. This is an extensive
rewrite, but it brings a number of benefits:
* planner no longer fails in the presence of "incomplete" operator families
that don't offer operators for every possible combination of datatypes.
* avoid generating and then discarding redundant equality clauses.
* remove bogus assumption that derived equalities always use operators
named "=".
* mergejoins can work with a variety of sort orders (e.g., descending) now,
instead of tying each mergejoinable operator to exactly one sort order.
* better recognition of redundant sort columns.
* can make use of equalities appearing underneath an outer join.
tables in the query compete for cache space, not just the one we are
currently costing an indexscan for. This seems more realistic, and it
definitely will help in examples recently exhibited by Stefan
Kaltenbrunner. To get the total size of all the tables involved, we must
tweak the handling of 'append relations' a bit --- formerly we looked up
information about the child tables on-the-fly during set_append_rel_pathlist,
but it needs to be done before we start doing any cost estimation, so
push it into the add_base_rels_to_query scan.
(e.g. "INSERT ... VALUES (...), (...), ...") and elsewhere as allowed
by the spec. (e.g. similar to a FROM clause subselect). initdb required.
Joe Conway and Tom Lane.
(table or index) before trying to open its relcache entry. This fixes
race conditions in which someone else commits a change to the relation's
catalog entries while we are in process of doing relcache load. Problems
of that ilk have been reported sporadically for years, but it was not
really practical to fix until recently --- for instance, the recent
addition of WAL-log support for in-place updates helped.
Along the way, remove pg_am.amconcurrent: all AMs are now expected to support
concurrent update.
relations: fix the executor so that we can have an Append plan on the
inside of a nestloop and still pass down outer index keys to index scans
within the Append, then generate such plans as if they were regular
inner indexscans. This avoids the need to evaluate the outer relation
multiple times.
thereby sharing code with the inheritance case. This puts the UNION-ALL-view
approach to partitioned tables on par with inheritance, so far as constraint
exclusion is concerned: it works either way. (Still need to update the docs
to say so.) The definition of "simple UNION ALL" is a little simpler than
I would like --- basically the union arms can only be SELECT * FROM foo
--- but it's good enough for partitioned-table cases.
inheritance trees on-the-fly, which pretty well constrained us to considering
only one way of planning inheritance, expand inheritance sets during the
planner prep phase, and build a side data structure that can be consulted
later to find which RTEs are members of which inheritance sets. As proof of
concept, use the data structure to plan joins against inheritance sets more
efficiently: we can now use indexes on the set members in inner-indexscan
joins. (The generated plans could be improved further, but it'll take some
executor changes.) This data structure will also support handling UNION ALL
subqueries in the same way as inheritance sets, but that aspect of it isn't
finished yet.
Per my recent proposal. I ended up basing the implementation on the
existing mechanism for enforcing valid join orders of IN joins --- the
rules for valid outer-join orders are somewhat similar.
comment line where output as too long, and update typedefs for /lib
directory. Also fix case where identifiers were used as variable names
in the backend, but as typedefs in ecpg (favor the backend for
indenting).
Backpatch to 8.1.X.
of a relation in a flat 'joininfo' list. The former arrangement grouped
the join clauses according to the set of unjoined relids used in each;
however, profiling on test cases involving lots of joins proves that
that data structure is a net loss. It takes more time to group the
join clauses together than is saved by avoiding duplicate tests later.
It doesn't help any that there are usually not more than one or two
clauses per group ...
other_rel_list with a single array indexed by rangetable index.
This reduces find_base_rel from O(N) to O(1) without any real penalty.
While find_base_rel isn't one of the major bottlenecks in any profile
I've seen so far, it was starting to creep up on the radar screen
for complex queries --- so might as well fix it.
a new PlannerInfo struct, which is passed around instead of the bare
Query in all the planning code. This commit is essentially just a
code-beautification exercise, but it does open the door to making
larger changes to the planner data structures without having to muck
with the widely-known Query struct.
that we acquire a lock on relations added to the query due to inheritance.
Formerly, no such lock was held throughout planning, which meant that
a schema change could occur to invalidate the plan before it's even
been completed.
but the code is basically working. Along the way, rewrite the entire
approach to processing OR index conditions, and make it work in join
cases for the first time ever. orindxpath.c is now basically obsolete,
but I left it in for the time being to allow easy comparison testing
against the old implementation.
Also performed an initial run through of upgrading our Copyright date to
extend to 2005 ... first run here was very simple ... change everything
where: grep 1996-2004 && the word 'Copyright' ... scanned through the
generated list with 'less' first, and after, to make sure that I only
picked up the right entries ...
a relation's number of blocks, rather than the possibly-obsolete value
in pg_class.relpages. Scale the value in pg_class.reltuples correspondingly
to arrive at a hopefully more accurate number of rows. When pg_class
contains 0/0, estimate a tuple width from the column datatypes and divide
that into current file size to estimate number of rows. This improved
methodology allows us to jettison the ancient hacks that put bogus default
values into pg_class when a table is first created. Also, per a suggestion
from Simon, make VACUUM (but not VACUUM FULL or ANALYZE) adjust the value
it puts into pg_class.reltuples to try to represent the mean tuple density
instead of the minimal density that actually prevails just after VACUUM.
These changes alter the plans selected for certain regression tests, so
update the expected files accordingly. (I removed join_1.out because
it's not clear if it still applies; we can add back any variant versions
as they are shown to be needed.)
1. Solve the problem of not having TOAST references hiding inside composite
values by establishing the rule that toasting only goes one level deep:
a tuple can contain toasted fields, but a composite-type datum that is
to be inserted into a tuple cannot. Enforcing this in heap_formtuple
is relatively cheap and it avoids a large increase in the cost of running
the tuptoaster during final storage of a row.
2. Fix some interesting problems in expansion of inherited queries that
reference whole-row variables. We never really did this correctly before,
but it's now relatively painless to solve by expanding the parent's
whole-row Var into a RowExpr() selecting the proper columns from the
child.
If you dike out the preventive check in CheckAttributeType(),
composite-type columns now seem to actually work. However, we surely
cannot ship them like this --- without I/O for composite types, you
can't get pg_dump to dump tables containing them. So a little more
work still to do.
In the past, we used a 'Lispy' linked list implementation: a "list" was
merely a pointer to the head node of the list. The problem with that
design is that it makes lappend() and length() linear time. This patch
fixes that problem (and others) by maintaining a count of the list
length and a pointer to the tail node along with each head node pointer.
A "list" is now a pointer to a structure containing some meta-data
about the list; the head and tail pointers in that structure refer
to ListCell structures that maintain the actual linked list of nodes.
The function names of the list API have also been changed to, I hope,
be more logically consistent. By default, the old function names are
still available; they will be disabled-by-default once the rest of
the tree has been updated to use the new API names.
corner cases that could stand improvement, but it does all the basic
stuff. A byproduct is that the selectivity routines are no longer
constrained to working on simple Vars; we might in future be able to
improve the behavior for subexpressions that don't match indexes.
node emits only those vars that are actually needed above it in the
plan tree. (There were comments in the code suggesting that this was
done at some point in the dim past, but for a long time we have just
made join nodes emit everything that either input emitted.) Aside from
being marginally more efficient, this fixes the problem noted by Peter
Eisentraut where a join above an IN-implemented-as-join might fail,
because the subplan targetlist constructed in the latter case didn't
meet the expectation of including everything.
Along the way, fix some places that were O(N^2) in the targetlist
length. This is not all the trouble spots for wide queries by any
means, but it's a step forward.
the outer query. (The implementation is a bit klugy, but it would take
nontrivial restructuring to make it nicer, which this is probably not
worth.) This avoids unnecessary sort steps in examples like
SELECT foo,count(*) FROM (SELECT ... ORDER BY foo,bar) sub GROUP BY foo
which means there is now a reasonable technique for controlling the
order of inputs to custom aggregates, even in the grouping case.
nodes where it's not really necessary. In many cases where the scan node
is not the topmost plan node (eg, joins, aggregation), it's possible to
just return the table tuple directly instead of generating an intermediate
projection tuple. In preliminary testing, this reduced the CPU time
needed for 'SELECT COUNT(*) FROM foo' by about 10%.
of known-equal expressions includes any constant expressions (including
Params from outer queries), we actively suppress any 'var = var'
clauses that are or could be deduced from the set, generating only the
deducible 'var = const' clauses instead. The idea here is to push down
the restrictions implied by the equality set to base relations whenever
possible. Once we have applied the 'var = const' clauses, the 'var = var'
clauses are redundant, and should be suppressed both to save work at
execution and to avoid double-counting restrictivity.
There are two implementation techniques: the executor understands a new
JOIN_IN jointype, which emits at most one matching row per left-hand row,
or the result of the IN's sub-select can be fed through a DISTINCT filter
and then joined as an ordinary relation.
Along the way, some minor code cleanup in the optimizer; notably, break
out most of the jointree-rearrangement preprocessing in planner.c and
put it in a new file prep/prepjointree.c.
containing a volatile function), rather than only on 'Var = Var' clauses
as before. This makes it practical to do flatten_join_alias_vars at the
start of planning, which in turn eliminates a bunch of klugery inside the
planner to deal with alias vars. As a free side effect, we now detect
implied equality of non-Var expressions; for example in
SELECT ... WHERE a.x = b.y and b.y = 42
we will deduce a.x = 42 and use that as a restriction qual on a. Also,
we can remove the restriction introduced 12/5/02 to prevent pullup of
subqueries whose targetlists contain sublinks.
Still TODO: make statistical estimation routines in selfuncs.c and costsize.c
smarter about expressions that are more complex than plain Vars. The need
for this is considerably greater now that we have to be able to estimate
the suitability of merge and hash join techniques on such expressions.
costs for expression evaluation, not only per-tuple cost as before.
This extension is needed in order to deal realistically with hashed or
materialized sub-selects.
joinclauses is determined accurately for each join. Formerly, the code only
considered joinclauses that used all of the rels from the outer side of the
join; thus for example
FROM (a CROSS JOIN b) JOIN c ON (c.f1 = a.x AND c.f2 = b.y)
could not exploit a two-column index on c(f1,f2), since neither of the
qual clauses would be in the joininfo list it looked in. The new code does
this correctly, and also is able to eliminate redundant clauses, thus fixing
the problem noted 24-Oct-02 by Hans-Jürgen Schönig.
some kibitzing from Tom Lane. Not everything works yet, and there's
no documentation or regression test, but let's commit this so Joe
doesn't need to cope with tracking changes in so many files ...
now has an RTE of its own, and references to its outputs now are Vars
referencing the JOIN RTE, rather than CASE-expressions. This allows
reverse-listing in ruleutils.c to use the correct alias easily, rather
than painfully reverse-engineering the alias namespace as it used to do.
Also, nested FULL JOINs work correctly, because the result of the inner
joins are simple Vars that the planner can cope with. This fixes a bug
reported a couple times now, notably by Tatsuo on 18-Nov-01. The alias
Vars are expanded into COALESCE expressions where needed at the very end
of planning, rather than during parsing.
Also, beginnings of support for showing plan qualifier expressions in
EXPLAIN. There are probably still cases that need work.
initdb forced due to change of stored-rule representation.
clause being added to a particular restriction-clause list is redundant
with those already in the list. This avoids useless work at runtime,
and (perhaps more importantly) keeps the selectivity estimation routines
from generating too-small estimates of numbers of output rows.
Also some minor improvements in OPTIMIZER_DEBUG displays.
create_index_paths are not immediately discarded, but are available for
subsequent planner work. This allows avoiding redundant syscache lookups
in several places. Change interface to operator selectivity estimation
procedures to allow faster and more flexible estimation.
Initdb forced due to change of pg_proc entries for selectivity functions!
joins, and clean things up a good deal at the same time. Append plan node
no longer hacks on rangetable at runtime --- instead, all child tables are
given their own RT entries during planning. Concept of multiple target
tables pushed up into execMain, replacing bug-prone implementation within
nodeAppend. Planner now supports generating Append plans for inheritance
sets either at the top of the plan (the old way) or at the bottom. Expanding
at the bottom is appropriate for tables used as sources, since they may
appear inside an outer join; but we must still expand at the top when the
target of an UPDATE or DELETE is an inheritance set, because we actually need
a different targetlist and junkfilter for each target table in that case.
Fortunately a target table can't be inside an outer join... Bizarre mutual
recursion between union_planner and prepunion.c is gone --- in fact,
union_planner doesn't really have much to do with union queries anymore,
so I renamed it grouping_planner.
(Don't forget that an alias is required.) Views reimplemented as expanding
to subselect-in-FROM. Grouping, aggregates, DISTINCT in views actually
work now (he says optimistically). No UNION support in subselects/views
yet, but I have some ideas about that. Rule-related permissions checking
moved out of rewriter and into executor.
INITDB REQUIRED!
materialized tupleset is small enough) instead of a temporary relation.
This was something I was thinking of doing anyway for performance, and Jan
says he needs it for TOAST because he doesn't want to cope with toasting
noname relations. With this change, the 'noname table' support in heap.c
is dead code, and I have accordingly removed it. Also clean up 'noname'
plan handling in planner --- nonames are either sort or materialize plans,
and it seems less confusing to handle them separately under those names.
accesses versus sequential accesses, a (very crude) estimate of the
effects of caching on random page accesses, and cost to evaluate WHERE-
clause expressions. Export critical parameters for this model as SET
variables. Also, create SET variables for the planner's enable flags
(enable_seqscan, enable_indexscan, etc) so that these can be controlled
more conveniently than via PGOPTIONS.
Planner now estimates both startup cost (cost before retrieving
first tuple) and total cost of each path, so it can optimize queries
with LIMIT on a reasonable basis by interpolating between these costs.
Same facility is a win for EXISTS(...) subqueries and some other cases.
Redesign pathkey representation to achieve a major speedup in planning
(I saw as much as 5X on a 10-way join); also minor changes in planner
to reduce memory consumption by recycling discarded Path nodes and
not constructing unnecessary lists.
Minor cleanups to display more-plausible costs in some cases in
EXPLAIN output.
Initdb forced by change in interface to index cost estimation
functions.
fields in JoinPaths --- turns out that we do need that after all :-(.
Also, rearrange planner so that only one RelOptInfo is created for a
particular set of joined base relations, no matter how many different
subsets of relations it can be created from. This saves memory and
processing time compared to the old method of making a bunch of RelOptInfos
and then removing the duplicates. Clean up the jointree iteration logic;
not sure if it's better, but I sure find it more readable and plausible
now, particularly for the case of 'bushy plans'.
nonoverlap_sets() and is_subset() to list.c, where they should have lived
to begin with, and rename to nonoverlap_setsi and is_subseti since they
only work on integer lists.
store all ordering information in pathkeys lists (which are now lists of
lists of PathKeyItem nodes, not just lists of lists of vars). This was
a big win --- the code is smaller and IMHO more understandable than it
was, even though it handles more cases. I believe the node changes will
not force an initdb for anyone; planner nodes don't show up in stored
rules.
Tom Lane
Bruce Momjian
Magnus Hagander
Joe Conway
PostgreSQL Daemon
Neil Conway
Marc G. Fournier