The default hook function sets the default password callback function.
In order to allow preloaded libraries to have an opportunity to override
the default, TLS initialization if now delayed slightly until after
shared preloaded libraries have been loaded.
A test module is provided which contains a trivial example that decodes
an obfuscated password for an SSL certificate.
Author: Andrew Dunstan
Reviewed By: Andreas Karlsson, Asaba Takanori
Discussion: https://postgr.es/m/04116472-818b-5859-1d74-3d995aab2252@2ndQuadrant.com
Mixing incorrect bounds in the SSL context leads to confusing error
messages generated by OpenSSL which are hard to act on. New range
checks are added when both min/max parameters are loaded in the context
of a SSL reload to improve the error reporting. Note that this does not
make use of the GUC hook machinery contrary to 41aadee, as there is no
way to ensure a consistent range check (except if there is a way one day
to define range types for GUC parameters?). Hence, this patch applies
only to OpenSSL, and uses a logic similar to other parameters to trigger
an error when reloading the SSL context in a session.
Author: Michael Paquier
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/20200114035420.GE1515@paquier.xyz
Our usual practice for "poor man's enum" catalog columns is to define
macros for the possible values and use those, not literal constants,
in C code. But for some reason lost in the mists of time, this was
never done for typalign/attalign or typstorage/attstorage. It's never
too late to make it better though, so let's do that.
The reason I got interested in this right now is the need to duplicate
some uses of the TYPSTORAGE constants in an upcoming ALTER TYPE patch.
But in general, this sort of change aids greppability and readability,
so it's a good idea even without any specific motivation.
I may have missed a few places that could be converted, and it's even
more likely that pending patches will re-introduce some hard-coded
references. But that's not fatal --- there's no expectation that
we'd actually change any of these values. We can clean up stragglers
over time.
Discussion: https://postgr.es/m/16457.1583189537@sss.pgh.pa.us
These are required by POSIX since SUSv2, and no live platforms fail
to provide them. On Windows, utime() exists and we bring our own
<utime.h>, so we're good there too. So remove the configure probes
and ad-hoc substitute code. We don't need to check for utimes()
anymore either, since that was only used as a substitute.
In passing, make the Windows build include <sys/utime.h> only where
we need it, not everywhere.
This is part of a series of commits to get rid of no-longer-relevant
configure checks and dead src/port/ code. I'm committing them separately
to make it easier to back out individual changes if they prove less
portable than I expect.
Discussion: https://postgr.es/m/15379.1582221614@sss.pgh.pa.us
This fixes and updates a couple of comments related to outdated Windows
versions. Particularly, src/common/exec.c had a fallback implementation
to read a file's line from a pipe because stdin/stdout/stderr does not
exist in Windows 2000 that is removed to simplify src/common/ as there
are unlikely versions of Postgres running on such platforms.
Author: Michael Paquier
Reviewed-by: Kyotaro Horiguchi, Juan José Santamaría Flecha
Discussion: https://postgr.es/m/20191219021526.GC4202@paquier.xyz
We used to strategically place newlines after some function call left
parentheses to make pgindent move the argument list a few chars to the
left, so that the whole line would fit under 80 chars. However,
pgindent no longer does that, so the newlines just made the code
vertically longer for no reason. Remove those newlines, and reflow some
of those lines for some extra naturality.
Reviewed-by: Michael Paquier, Tom Lane
Discussion: https://postgr.es/m/20200129200401.GA6303@alvherre.pgsql
These two new parameters, named sslminprotocolversion and
sslmaxprotocolversion, allow to respectively control the minimum and the
maximum version of the SSL protocol used for the SSL connection attempt.
The default setting is to allow any version for both the minimum and the
maximum bounds, causing libpq to rely on the bounds set by the backend
when negotiating the protocol to use for an SSL connection. The bounds
are checked when the values are set at the earliest stage possible as
this makes the checks independent of any SSL implementation.
Author: Daniel Gustafsson
Reviewed-by: Michael Paquier, Cary Huang
Discussion: https://postgr.es/m/4F246AE3-A7AE-471E-BD3D-C799D3748E03@yesql.se
The leaks have been detected by a Coverity run on Windows. No backpatch
is done as the leaks are minor.
While on it, make restricted token creation more consistent in its error
handling by logging an error instead of a warning if missing
advapi32.dll, which was missing in the NT4 days. Any modern platform
should have this DLL around. Now, if the library is not there, an error
is still reported back to the caller, and nothing is done do there is no
behavior change done in this commit.
Author: Ranier Vilela
Discussion: https://postgr.es/m/CAEudQApa9MG0foPkgPX87fipk=vhnF2Xfg+CfUyR08h4R7Mywg@mail.gmail.com
Two routines have been added in OpenSSL 1.1.0 to set the protocol bounds
allowed within a given SSL context:
- SSL_CTX_set_min_proto_version
- SSL_CTX_set_max_proto_version
As Postgres supports OpenSSL down to 1.0.1 (as of HEAD), equivalent
replacements exist in the tree, which are only available for the
backend. A follow-up patch is planned to add control of the SSL
protocol bounds for libpq, so move those routines to src/common/ so as
libpq can use them.
Author: Daniel Gustafsson
Discussion: https://postgr.es/m/4F246AE3-A7AE-471E-BD3D-C799D3748E03@yesql.se
Fix assorted bugs in handling of non-blocking I/O when using GSSAPI
encryption. The encryption layer could return the wrong status
information to its caller, resulting in effectively dropping some data
(or possibly in aborting a not-broken connection), or in a "livelock"
situation where data remains to be sent but the upper layers think
transmission is done and just go to sleep. There were multiple small
thinkos contributing to that, as well as one big one (failure to think
through what to do when a send fails after having already transmitted
data). Note that these errors could cause failures whether the client
application asked for non-blocking I/O or not, since both libpq and
the backend always run things in non-block mode at this level.
Also get rid of use of static variables for GSSAPI inside libpq;
that's entirely not okay given that multiple connections could be
open at once inside a single client process.
Also adjust a bunch of random small discrepancies between the frontend
and backend versions of the send/receive functions -- except for error
handling, they should be identical, and now they are.
Also extend the Kerberos TAP tests to exercise cases where nontrivial
amounts of data need to be pushed through encryption. Before, those
tests didn't provide any useful coverage at all for the cases of
interest here. (They still might not, depending on timing, but at
least there's a chance.)
Per complaint from pmc@citylink and subsequent investigation.
Back-patch to v12 where this code was introduced.
Discussion: https://postgr.es/m/20200109181822.GA74698@gate.oper.dinoex.org
Support is out of scope from all the major vendors for these versions
(for example RHEL5 uses a version based on 0.9.8, and RHEL6 uses 1.0.1),
and it created some extra maintenance work. Upstream has stopped
support of 0.9.8 in December 2015 and of 1.0.0 in February 2016.
Since b1abfec, note that the default SSL protocol version set with
ssl_min_protocol_version is TLSv1.2, whose support was added in OpenSSL
1.0.1, so there is no point to enforce ssl_min_protocol_version to TLSv1
in the SSL tests.
Author: Michael Paquier
Reviewed-by: Daniel Gustafsson, Tom Lane
Discussion: https://postgr.es/m/20191205083252.GE5064@paquier.xyz
Using \ is unnecessary and ugly, so remove that. While at it, stitch
the literals back into a single line: we've long discouraged splitting
error message literals even when they go past the 80 chars line limit,
to improve greppability.
Leave contrib/tablefunc alone.
Discussion: https://postgr.es/m/20191223195156.GA12271@alvherre.pgsql
The getpeereid() uses have so far been protected by HAVE_UNIX_SOCKETS,
so they didn't ever care about Windows support. But in anticipation
of Unix-domain socket support on Windows, that needs to be handled
differently.
Windows doesn't support getpeereid() at this time, so we use the
existing not-supported code path. We let configure do its usual thing
of picking up the replacement from libpgport, instead of the custom
overrides that it was doing before.
But then Windows doesn't have struct passwd, so this patch sprinkles
some additional #ifdef WIN32 around to make it work. This is similar
to existing code that deals with this issue.
Reviewed-by: Andrew Dunstan <andrew.dunstan@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/5974caea-1267-7708-40f2-6009a9d653b0@2ndquadrant.com
When loading DH parameters used for the generation of ephemeral DH keys
in the backend, the code has never bothered releasing the memory used
for the DH information loaded from a file or from libpq's default. This
commit makes sure that the information is properly free()'d.
Note that as SSL parameters can be reloaded, this can cause an accumulation
of memory leaked. As the leak is minor, no backpatch is done.
Reported-by: Dmitry Uspenskiy
Discussion: https://postgr.es/m/16160-18367e56e9a28264@postgresql.org
Commit 6b76f1bb5 changed all the RADIUS auth parameters to be lists
rather than single values. But its use of SplitIdentifierString
to parse the list format was not very carefully thought through,
because that function thinks it's parsing SQL identifiers, which
means it will (a) downcase the strings and (b) truncate them to
be shorter than NAMEDATALEN. While downcasing should be harmless
for the server names and ports, it's just wrong for the shared
secrets, and probably for the NAS Identifier strings as well.
The truncation aspect is at least potentially a problem too,
though typical values for these parameters would fit in 63 bytes.
Fortunately, we now have a function SplitGUCList that is exactly
the same except for not doing the two unwanted things, so fixing
this is a trivial matter of calling that function instead.
While here, improve the documentation to show how to double-quote
the parameter values. I failed to resist the temptation to do
some copy-editing as well.
Report and patch from Marcos David (bug #16106); doc changes by me.
Back-patch to v10 where the aforesaid commit came in, since this is
arguably a regression from our previous behavior with RADIUS auth.
Discussion: https://postgr.es/m/16106-7d319e4295d08e70@postgresql.org
When maintaining or merging patches, one of the most common sources
for conflicts are the list of objects in makefiles. Especially when
the split across lines has been changed on both sides, which is
somewhat common due to attempting to stay below 80 columns, those
conflicts are unnecessarily laborious to resolve.
By splitting, and alphabetically sorting, OBJS style lines into one
object per line, conflicts should be less frequent, and easier to
resolve when they still occur.
Author: Andres Freund
Discussion: https://postgr.es/m/20191029200901.vww4idgcxv74cwes@alap3.anarazel.de
For a long time (since commit aed378e8d) we have had a policy to log
nothing about a connection if the client disconnects when challenged
for a password. This is because libpq-using clients will typically
do that, and then come back for a new connection attempt once they've
collected a password from their user, so that logging the abandoned
connection attempt will just result in log spam. However, this did
not work well for PAM authentication: the bottom-level function
pam_passwd_conv_proc() was on board with it, but we logged messages
at higher levels anyway, for lack of any reporting mechanism.
Add a flag and tweak the logic so that the case is silent, as it is
for other password-using auth mechanisms.
Per complaint from Yoann La Cancellera. It's been like this for awhile,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/CACP=ajbrFFYUrLyJBLV8=q+eNCapa1xDEyvXhMoYrNphs-xqPw@mail.gmail.com
This gives an alternative way of catching exceptions, for the common
case where the cleanup code is the same in the error and non-error
cases. So instead of
PG_TRY();
{
... code that might throw ereport(ERROR) ...
}
PG_CATCH();
{
cleanup();
PG_RE_THROW();
}
PG_END_TRY();
cleanup();
one can write
PG_TRY();
{
... code that might throw ereport(ERROR) ...
}
PG_FINALLY();
{
cleanup();
}
PG_END_TRY();
Discussion: https://www.postgresql.org/message-id/flat/95a822c3-728b-af0e-d7e5-71890507ae0c%402ndquadrant.com
IDENT_USERNAME_MAX is the maximum length of the information returned
by an ident server, per RFC 1413. Using it as the buffer size in peer
authentication is inappropriate. It was done here because of the
historical relationship between peer and ident authentication. To
reduce confusion between the two authenticaton methods and disentangle
their code, use a dynamically allocated buffer instead.
Discussion: https://www.postgresql.org/message-id/flat/c798fba5-8b71-4f27-c78e-37714037ea31%402ndquadrant.com
For historical reasons, the functions for peer authentication were
grouped under ident authentication. But they are really completely
separate, so give them their own section headings.
POSIX sigaction(2) can be told to block a set of signals while a
signal handler executes. Make use of that instead of manually
blocking and unblocking signals in the postmaster's signal handlers.
This should save a few cycles, and it also prevents recursive
invocation of signal handlers when many signals arrive in close
succession. We have seen buildfarm failures that seem to be due to
postmaster stack overflow caused by such recursion (exacerbated by
a Linux PPC64 kernel bug).
This doesn't change anything about the way that it works on Windows.
Somebody might consider adjusting port/win32/signal.c to let it work
similarly, but I'm not in a position to do that.
For the moment, just apply to HEAD. Possibly we should consider
back-patching this, but it'd be good to let it age awhile first.
Discussion: https://postgr.es/m/14878.1570820201@sss.pgh.pa.us
Within the context of SCRAM, "verifier" has a specific meaning in the
protocol, per RFCs. The existing code used "verifier" differently, to
mean whatever is or would be stored in pg_auth.rolpassword.
Fix this by using the term "secret" for this, following RFC 5803.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://www.postgresql.org/message-id/flat/be397b06-6e4b-ba71-c7fb-54cae84a7e18%402ndquadrant.com
Some older OpenSSL versions (0.9.8 branch) define TLS*_VERSION macros
but not the corresponding SSL_OP_NO_* macro, which causes the code for
handling ssl_min_protocol_version/ssl_max_protocol_version to fail to
compile. To fix, add more #ifdefs and error handling.
Reported-by: Victor Wagner <vitus@wagner.pp.ru>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://www.postgresql.org/message-id/flat/20190924101859.09383b4f%40fafnir.local.vm
HEAD supports OpenSSL 0.9.8 and newer versions, and this code likely got
forgotten as its surrounding comments mention an incorrect version
number.
Author: Michael Paquier
Reviewed-by: Peter Eisentraut
Discussion: https://postgr.es/m/20190927032311.GB8485@paquier.xyz
Make the error messages around GSSAPI encryption a bit clearer. Tweak
some messages to avoid plural problems.
Also make a code change for clarity. Using "conf" for "confidential"
is quite confusing. Using "conf_state" is perhaps not much better but
that's what the GSSAPI documentation uses, so there is at least some
hope of understanding it.
Use the explicit_bzero() function in places where it is important that
security information such as passwords is cleared from memory. There
might be other places where it could be useful; this is just an
initial collection.
For platforms that don't have explicit_bzero(), provide various
fallback implementations. (explicit_bzero() itself isn't standard,
but as Linux/glibc, FreeBSD, and OpenBSD have it, it's the most common
spelling, so it makes sense to make that the invocation point.)
Discussion: https://www.postgresql.org/message-id/flat/42d26bde-5d5b-c90d-87ae-6cab875f73be%402ndquadrant.com
b654714 has reworked the way trailing CR/LF characters are removed from
strings. This commit introduces a new routine in common/string.c and
refactors the code so as the logic is in a single place, mostly.
Author: Michael Paquier
Reviewed-by: Bruce Momjian
Discussion: https://postgr.es/m/20190801031820.GF29334@paquier.xyz
These were introduced by pgindent due to fixe to broken
indentation (c.f. 8255c7a5ee). Previously the mis-indentation of
function prototypes was creatively used to reduce indentation in a few
places.
As that formatting only exists in master and REL_12_STABLE, it seems
better to fix it in both, rather than having some odd indentation in
v12 that somebody might copy for future patches or such.
Author: Andres Freund
Discussion: https://postgr.es/m/20190728013754.jwcbe5nfyt3533vx@alap3.anarazel.de
Backpatch: 12-
libpq failed to ignore Windows-style newlines in connection service files.
This normally wasn't a problem on Windows itself, because fgets() would
convert \r\n to just \n. But if libpq were running inside a program that
changes the default fopen mode to binary, it would see the \r's and think
they were data. In any case, it's project policy to ignore \r in text
files unconditionally, because people sometimes try to use files with
DOS-style newlines on Unix machines, where the C library won't hide that
from us.
Hence, adjust parseServiceFile() to ignore \r as well as \n at the end of
the line. In HEAD, go a little further and make it ignore all trailing
whitespace, to match what it's always done with leading whitespace.
In HEAD, also run around and fix up everyplace where we have
newline-chomping code to make all those places look consistent and
uniformly drop \r. It is not clear whether any of those changes are
fixing live bugs. Most of the non-cosmetic changes are in places that
are reading popen output, and the jury is still out as to whether popen
on Windows can return \r\n. (The Windows-specific code in pipe_read_line
seems to think so, but our lack of support for this elsewhere suggests
maybe it's not a problem in practice.) Hence, I desisted from applying
those changes to back branches, except in run_ssl_passphrase_command()
which is new enough and little-tested enough that we'd probably not have
heard about any problems there.
Tom Lane and Michael Paquier, per bug #15827 from Jorge Gustavo Rocha.
Back-patch the parseServiceFile() change to all supported branches,
and the run_ssl_passphrase_command() change to v11 where that was added.
Discussion: https://postgr.es/m/15827-e6ba53a3a7ed543c@postgresql.org
Originally, Postgres Lists were a more or less exact reimplementation of
Lisp lists, which consist of chains of separately-allocated cons cells,
each having a value and a next-cell link. We'd hacked that once before
(commit d0b4399d8) to add a separate List header, but the data was still
in cons cells. That makes some operations -- notably list_nth() -- O(N),
and it's bulky because of the next-cell pointers and per-cell palloc
overhead, and it's very cache-unfriendly if the cons cells end up
scattered around rather than being adjacent.
In this rewrite, we still have List headers, but the data is in a
resizable array of values, with no next-cell links. Now we need at
most two palloc's per List, and often only one, since we can allocate
some values in the same palloc call as the List header. (Of course,
extending an existing List may require repalloc's to enlarge the array.
But this involves just O(log N) allocations not O(N).)
Of course this is not without downsides. The key difficulty is that
addition or deletion of a list entry may now cause other entries to
move, which it did not before.
For example, that breaks foreach() and sister macros, which historically
used a pointer to the current cons-cell as loop state. We can repair
those macros transparently by making their actual loop state be an
integer list index; the exposed "ListCell *" pointer is no longer state
carried across loop iterations, but is just a derived value. (In
practice, modern compilers can optimize things back to having just one
loop state value, at least for simple cases with inline loop bodies.)
In principle, this is a semantics change for cases where the loop body
inserts or deletes list entries ahead of the current loop index; but
I found no such cases in the Postgres code.
The change is not at all transparent for code that doesn't use foreach()
but chases lists "by hand" using lnext(). The largest share of such
code in the backend is in loops that were maintaining "prev" and "next"
variables in addition to the current-cell pointer, in order to delete
list cells efficiently using list_delete_cell(). However, we no longer
need a previous-cell pointer to delete a list cell efficiently. Keeping
a next-cell pointer doesn't work, as explained above, but we can improve
matters by changing such code to use a regular foreach() loop and then
using the new macro foreach_delete_current() to delete the current cell.
(This macro knows how to update the associated foreach loop's state so
that no cells will be missed in the traversal.)
There remains a nontrivial risk of code assuming that a ListCell *
pointer will remain good over an operation that could now move the list
contents. To help catch such errors, list.c can be compiled with a new
define symbol DEBUG_LIST_MEMORY_USAGE that forcibly moves list contents
whenever that could possibly happen. This makes list operations
significantly more expensive so it's not normally turned on (though it
is on by default if USE_VALGRIND is on).
There are two notable API differences from the previous code:
* lnext() now requires the List's header pointer in addition to the
current cell's address.
* list_delete_cell() no longer requires a previous-cell argument.
These changes are somewhat unfortunate, but on the other hand code using
either function needs inspection to see if it is assuming anything
it shouldn't, so it's not all bad.
Programmers should be aware of these significant performance changes:
* list_nth() and related functions are now O(1); so there's no
major access-speed difference between a list and an array.
* Inserting or deleting a list element now takes time proportional to
the distance to the end of the list, due to moving the array elements.
(However, it typically *doesn't* require palloc or pfree, so except in
long lists it's probably still faster than before.) Notably, lcons()
used to be about the same cost as lappend(), but that's no longer true
if the list is long. Code that uses lcons() and list_delete_first()
to maintain a stack might usefully be rewritten to push and pop at the
end of the list rather than the beginning.
* There are now list_insert_nth...() and list_delete_nth...() functions
that add or remove a list cell identified by index. These have the
data-movement penalty explained above, but there's no search penalty.
* list_concat() and variants now copy the second list's data into
storage belonging to the first list, so there is no longer any
sharing of cells between the input lists. The second argument is
now declared "const List *" to reflect that it isn't changed.
This patch just does the minimum needed to get the new implementation
in place and fix bugs exposed by the regression tests. As suggested
by the foregoing, there's a fair amount of followup work remaining to
do.
Also, the ENABLE_LIST_COMPAT macros are finally removed in this
commit. Code using those should have been gone a dozen years ago.
Patch by me; thanks to David Rowley, Jesper Pedersen, and others
for review.
Discussion: https://postgr.es/m/11587.1550975080@sss.pgh.pa.us
This is a follow-up refactoring after 09ec55b and b674211, which has
proved that the encoding and decoding routines used by SCRAM have a
poor interface when it comes to check after buffer overflows. This adds
an extra argument in the shape of the length of the result buffer for
each routine, which is used for overflow checks when encoding or
decoding an input string. The original idea comes from Tom Lane.
As a result of that, the encoding routine can now fail, so all its
callers are adjusted to generate proper error messages in case of
problems.
On failure, the result buffer gets zeroed.
Author: Michael Paquier
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/20190623132535.GB1628@paquier.xyz
Any authenticated user can overflow a stack-based buffer by changing the
user's own password to a purpose-crafted value. This often suffices to
execute arbitrary code as the PostgreSQL operating system account.
This fix is contributed by multiple folks, based on an initial analysis
from Tom Lane. This issue has been introduced by 68e61ee, so it was
possible to make use of it at authentication time. It became more
easily to trigger after ccae190 which has made the SCRAM parsing more
strict when changing a password, in the case where the client passes
down a verifier already hashed using SCRAM. Back-patch to v10 where
SCRAM has been introduced.
Reported-by: Alexander Lakhin
Author: Jonathan Katz, Heikki Linnakangas, Michael Paquier
Security: CVE-2019-10164
Backpatch-through: 10
Andrew Dunstan
Michael Paquier
Tom Lane
Peter Eisentraut
Alvaro Herrera
Bruce Momjian
Amit Kapila
Andres Freund