The existing "connection authorized" server log messages used OpenSSL
API calls directly, even though similar abstracted API calls exist.
Change to use the latter instead.
Change the function prototype for the functions that return the TLS
version and the cipher to return const char * directly instead of
copying into a buffer. That makes them slightly easier to use.
Add bits= to the message. psql shows that, so we might as well show the
same information on the client and server.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Introduce parallel-aware hash joins that appear in EXPLAIN plans as Parallel
Hash Join with Parallel Hash. While hash joins could already appear in
parallel queries, they were previously always parallel-oblivious and had a
partial subplan only on the outer side, meaning that the work of the inner
subplan was duplicated in every worker.
After this commit, the planner will consider using a partial subplan on the
inner side too, using the Parallel Hash node to divide the work over the
available CPU cores and combine its results in shared memory. If the join
needs to be split into multiple batches in order to respect work_mem, then
workers process different batches as much as possible and then work together
on the remaining batches.
The advantages of a parallel-aware hash join over a parallel-oblivious hash
join used in a parallel query are that it:
* avoids wasting memory on duplicated hash tables
* avoids wasting disk space on duplicated batch files
* divides the work of building the hash table over the CPUs
One disadvantage is that there is some communication between the participating
CPUs which might outweigh the benefits of parallelism in the case of small
hash tables. This is avoided by the planner's existing reluctance to supply
partial plans for small scans, but it may be necessary to estimate
synchronization costs in future if that situation changes. Another is that
outer batch 0 must be written to disk if multiple batches are required.
A potential future advantage of parallel-aware hash joins is that right and
full outer joins could be supported, since there is a single set of matched
bits for each hashtable, but that is not yet implemented.
A new GUC enable_parallel_hash is defined to control the feature, defaulting
to on.
Author: Thomas Munro
Reviewed-By: Andres Freund, Robert Haas
Tested-By: Rafia Sabih, Prabhat Sahu
Discussion:
https://postgr.es/m/CAEepm=2W=cOkiZxcg6qiFQP-dHUe09aqTrEMM7yJDrHMhDv_RA@mail.gmail.comhttps://postgr.es/m/CAEepm=37HKyJ4U6XOLi=JgfSHM3o6B-GaeO-6hkOmneTDkH+Uw@mail.gmail.com
When a worker is flagged as BGW_NEVER_RESTART and we fail to start it,
or if it is not marked BGW_NEVER_RESTART but is terminated before
startup succeeds, what BgwHandleStatus should be reported? The
previous code really hadn't considered this possibility (as indicated
by the comments which ignore it completely) and would typically return
BGWH_NOT_YET_STARTED, but that's not a good answer, because then
there's no way for code using GetBackgroundWorkerPid() to tell the
difference between a worker that has not started but will start
later and a worker that has not started and will never be started.
So, when this case happens, return BGWH_STOPPED instead. Update the
comments to reflect this.
The preceding fix by itself is insufficient to fix the problem,
because the old code also didn't send a notification to the process
identified in bgw_notify_pid when startup failed. That might've
been technically correct under the theory that the status of the
worker was BGWH_NOT_YET_STARTED, because the status would indeed not
change when the worker failed to start, but now that we're more
usefully reporting BGWH_STOPPED, a notification is needed.
Without these fixes, code which starts background workers and then
uses the recommended APIs to wait for those background workers to
start would hang indefinitely if the postmaster failed to fork a
worker.
Amit Kapila and Robert Haas
Discussion: http://postgr.es/m/CAA4eK1KDfKkvrjxsKJi3WPyceVi3dH1VCkbTJji2fuwKuB=3uw@mail.gmail.com
This patch fixes a couple of low-probability bugs that could lead to
reporting an irrelevant errno value (and hence possibly a wrong SQLSTATE)
concerning directory-open or file-open failures. It also fixes places
where we took shortcuts in reporting such errors, either by using elog
instead of ereport or by using ereport but forgetting to specify an
errcode. And it eliminates a lot of just plain redundant error-handling
code.
In service of all this, export fd.c's formerly-static function
ReadDirExtended, so that external callers can make use of the coding
pattern
dir = AllocateDir(path);
while ((de = ReadDirExtended(dir, path, LOG)) != NULL)
if they'd like to treat directory-open failures as mere LOG conditions
rather than errors. Also fix FreeDir to be a no-op if we reach it
with dir == NULL, as such a coding pattern would cause.
Then, remove code at many call sites that was throwing an error or log
message for AllocateDir failure, as ReadDir or ReadDirExtended can handle
that job just fine. Aside from being a net code savings, this gets rid of
a lot of not-quite-up-to-snuff reports, as mentioned above. (In some
places these changes result in replacing a custom error message such as
"could not open tablespace directory" with more generic wording "could not
open directory", but it was agreed that the custom wording buys little as
long as we report the directory name.) In some other call sites where we
can't just remove code, change the error reports to be fully
project-style-compliant.
Also reorder code in restoreTwoPhaseData that was acquiring a lock
between AllocateDir and ReadDir; in the unlikely but surely not
impossible case that LWLockAcquire changes errno, AllocateDir failures
would be misreported. There is no great value in opening the directory
before acquiring TwoPhaseStateLock, so just do it in the other order.
Also fix CheckXLogRemoved to guarantee that it preserves errno,
as quite a number of call sites are implicitly assuming. (Again,
it's unlikely but I think not impossible that errno could change
during a SpinLockAcquire. If so, this function was broken for its
own purposes as well as breaking callers.)
And change a few places that were using not-per-project-style messages,
such as "could not read directory" when "could not open directory" is
more correct.
Back-patch the exporting of ReadDirExtended, in case we have occasion
to back-patch some fix that makes use of it; it's not needed right now
but surely making it global is pretty harmless. Also back-patch the
restoreTwoPhaseData and CheckXLogRemoved fixes. The rest of this is
essentially cosmetic and need not get back-patched.
Michael Paquier, with a bit of additional work by me
Discussion: https://postgr.es/m/CAB7nPqRpOCxjiirHmebEFhXVTK7V5Jvw4bz82p7Oimtsm3TyZA@mail.gmail.com
Previously, any attempt to request a 3.x protocol version other than
3.0 would lead to a hard connection failure, which made the minor
protocol version really no different from the major protocol version
and precluded gentle protocol version breaks. Instead, when the
client requests a 3.x protocol version where x is greater than 0, send
the new NegotiateProtocolVersion message to convey that we support
only 3.0. This makes it possible to introduce new minor protocol
versions without requiring a connection retry when the server is
older.
In addition, if the startup packet includes name/value pairs where
the name starts with "_pq_.", assume that those are protocol options,
not GUCs. Include those we don't support (i.e. all of them, at
present) in the NegotiateProtocolVersion message so that the client
knows they were not understood. This makes it possible for the
client to request previously-unsupported features without bumping
the protocol version at all; the client can tell from the server's
response whether the option was understood.
It will take some time before servers that support these new
facilities become common in the wild; to speed things up and make
things easier for a future 3.1 protocol version, back-patch to all
supported releases.
Robert Haas and Badrul Chowdhury
Discussion: http://postgr.es/m/BN6PR21MB0772FFA0CBD298B76017744CD1730@BN6PR21MB0772.namprd21.prod.outlook.com
Discussion: http://postgr.es/m/30788.1498672033@sss.pgh.pa.us
The lower case spellings are C and C++ standard and are used in most
parts of the PostgreSQL sources. The upper case spellings are only used
in some files/modules. So standardize on the standard spellings.
The APIs for ICU, Perl, and Windows define their own TRUE and FALSE, so
those are left as is when using those APIs.
In code comments, we use the lower-case spelling for the C concepts and
keep the upper-case spelling for the SQL concepts.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
In autovacuum's "work item" processing, a few strings were allocated in
the current transaction's memory context, which goes away during error
handling; if an error happened during execution of the work item, the
pfree() calls to clean up afterwards would try to release already-released
memory, possibly leading to a crash. In branch master, this was already
fixed by commit 335f3d04e4, so backpatch that to REL_10_STABLE to fix
the problem there too.
As a secondary problem, verify that the autovacuum worker is connected
to the right database for each work item; otherwise some items would be
discarded by workers in other databases.
Reported-by: Justin Pryzby
Discussion: https://postgr.es/m/20171014035732.GB31726@telsasoft.com
Not much to say about this; does what it says on the tin.
However, formerly, if there was a column list then the ANALYZE action was
implied; now it must be specified, or you get an error. This is because
it would otherwise be a bit unclear what the user meant if some tables
have column lists and some don't.
Nathan Bossart, reviewed by Michael Paquier and Masahiko Sawada, with some
editorialization by me
Discussion: https://postgr.es/m/E061A8E3-5E3D-494D-94F0-E8A9B312BBFC@amazon.com
All postgres internal usages are replaced, it's just libpq example
usages that haven't been converted. External users of libpq can't
generally rely on including postgres internal headers.
Note that this includes replacing open-coded byte swapping of 64bit
integers (using two 32 bit swaps) with a single 64bit swap.
Where it looked applicable, I have removed netinet/in.h and
arpa/inet.h usage, which previously provided the relevant
functionality. It's perfectly possible that I missed other reasons for
including those, the buildfarm will tell.
Author: Andres Freund
Discussion: https://postgr.es/m/20170927172019.gheidqy6xvlxb325@alap3.anarazel.de
Add bgw_type field to background worker structure. It is intended to be
set to the same value for all workers of the same type, so they can be
grouped in pg_stat_activity, for example.
The backend_type column in pg_stat_activity now shows bgw_type for a
background worker. The ps listing also no longer calls out that a
process is a background worker but just show the bgw_type. That way,
being a background worker is more of an implementation detail now that
is not shown to the user. However, most log messages still refer to
'background worker "%s"'; otherwise constructing sensible and
translatable log messages would become tricky.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Invoke vacuum(), as well as "work item" processing, in the PortalContext
that do_autovacuum() has manufactured, which will be reset before each
such invocation. This ensures cleanup of any memory leaked by these
operations. It also avoids the rather dangerous practice of calling
vacuum() in a context that vacuum() itself will destroy while it runs.
There's no known live bug there, but it's not hard to imagine introducing
one if we leave it like this.
Tom Lane, reviewed by Michael Paquier and Alvaro Herrera
Discussion: https://postgr.es/m/13849.1506114543@sss.pgh.pa.us
Remove gratuitous differences in the process names shown in
pg_stat_activity.backend_type and the ps output.
Reviewed-by: Takayuki Tsunakawa <tsunakawa.takay@jp.fujitsu.com>
For performance reasons a larger segment size than the default 16MB
can be useful. A larger segment size has two main benefits: Firstly,
in setups using archiving, it makes it easier to write scripts that
can keep up with higher amounts of WAL, secondly, the WAL has to be
written and synced to disk less frequently.
But at the same time large segment size are disadvantageous for
smaller databases. So far the segment size had to be configured at
compile time, often making it unrealistic to choose one fitting to a
particularly load. Therefore change it to a initdb time setting.
This includes a breaking changes to the xlogreader.h API, which now
requires the current segment size to be configured. For that and
similar reasons a number of binaries had to be taught how to recognize
the current segment size.
Author: Beena Emerson, editorialized by Andres Freund
Reviewed-By: Andres Freund, David Steele, Kuntal Ghosh, Michael
Paquier, Peter Eisentraut, Robert Hass, Tushar Ahuja
Discussion: https://postgr.es/m/CAOG9ApEAcQ--1ieKbhFzXSQPw_YLmepaa4hNdnY5+ZULpt81Mw@mail.gmail.com
The use of strnlen rather than strlen was just paranoia. Instead of
giving up on the paranoia, just implement the safeguard
differently. And add a comment explaining why we're careful.
Author: Andres Freund
Discussion: https://postgr.es/m/E1duOkJ-0001Mc-U5@gemulon.postgresql.org
Previously multi-byte aware truncation was done on every
pgstat_report_activity() call - proving to be a bottleneck for
workloads with long query strings that execute quickly.
Instead move the truncation to the read side, which commonly is
executed far less frequently. That's possible because all server
encodings allow to determine the length of a multi-byte string from
the first byte.
Rename PgBackendStatus.st_activity to st_activity_raw so existing
extension users of the field break - their code has to be adjusted to
use pgstat_clip_activity().
Author: Andres Freund
Tested-By: Khuntal Ghosh
Reviewed-By: Robert Haas, Tom Lane
Discussion: https://postgr.es/m/20170912071948.pa7igbpkkkviecpz@alap3.anarazel.de
The bug was caused by not re-reading the control file during crash
recovery restarts, which lead to an attempt to pfree() shared memory
contents. The fix is to re-read the control file, which seems good
anyway.
It's unclear as of this moment, whether we want to keep the
refactoring introduced in the commit referenced above, or come up with
an alternative approach. But fixing the bug in the mean time seems
like a good idea regardless.
A followup commit will introduce regression test coverage for crash
restarts.
Reported-By: Tom Lane
Discussion: https://postgr.es/m/14134.1505572349@sss.pgh.pa.us
Previously we read the control file in multiple places. But soon the
segment size will be configurable and stored in the control file, and
that needs to be available earlier than it currently is needed.
Instead of adding yet another place where it's read, refactor things
so there's a single processing of the control file during startup (in
EXEC_BACKEND that's every individual backend's startup).
Author: Andres Freund
Discussion: http://postgr.es/m/20170913092828.aozd3gvvmw67gmyc@alap3.anarazel.de
Commit 0e141c0fbb introduced a mechanism
to reduce contention on ProcArrayLock by having a single process clear
XIDs in the procArray on behalf of multiple processes, reducing the
need to hand the lock around. A previous attempt to introduce a similar
mechanism for CLogControlLock in ccce90b398
crashed and burned, but the design problem which resulted in those
failures is believed to have been corrected in this version.
Amit Kapila, with some cosmetic changes by me. See the previous commit
message for additional credits.
Discussion: http://postgr.es/m/CAA4eK1KudxzgWhuywY_X=yeSAhJMT4DwCjroV5Ay60xaeB2Eew@mail.gmail.com
The initial implementation of autovacuum work-items used a dynamic
shared memory area (DSA). However, it's argued that dynamic shared
memory is not portable enough, so we cannot rely on it being supported
everywhere; at the same time, autovacuum work-items are now a critical
part of the server, so it's not acceptable that they don't work in the
cases where dynamic shared memory is disabled. Therefore, let's fall
back to a simpler implementation of work-items that just uses
autovacuum's main shared memory segment for storage.
Discussion: https://postgr.es/m/CA+TgmobQVbz4K_+RSmiM9HeRKpy3vS5xnbkL95gSEnWijzprKQ@mail.gmail.com
The original code (since 00e6a16d01) was assuming aborting the
transaction in autovacuum launcher was sufficient to release all
resources, but in reality the launcher runs quite a lot of code out of
any transactions. Re-introduce individual cleanup calls to make abort
more robust.
Reported-by: Robert Haas
Discussion: https://postgr.es/m/CA+TgmobQVbz4K_+RSmiM9HeRKpy3vS5xnbkL95gSEnWijzprKQ@mail.gmail.com
Similar to what was fixed in commit 9915de6c1c for replication slots,
but this time it's related to replication origins: DROP SUBSCRIPTION
attempts to drop the replication origin, but that fails if the
replication worker process hasn't yet marked it unused. This causes
failures in the buildfarm:
ERROR: could not drop replication origin with OID 1, in use by PID 34069
Like the aforementioned commit, fix by having the process running DROP
SUBSCRIPTION sleep until the worker marks the the replication origin
struct as free. This uses a condition variable on each replication
origin shmem state struct, so that the session trying to drop can sleep
and expect to be awakened by the process keeping the origin open.
Also fix a SGML markup in the previous commit.
Discussion: https://postgr.es/m/20170808001433.rozlseaf4m2wkw3n@alvherre.pgsql
In commit 9915de6c1c, we introduced a new wait point for replication
slots and incorrectly labelled it as wait event PG_WAIT_LOCK. That's
wrong, so invent an appropriate new wait event instead, and document it
properly.
While at it, fix numerous other problems in the vicinity:
- two different walreceiver wait events were being mixed up in a single
wait event (which wasn't documented either); split it out so that they
can be distinguished, and document the new events properly.
- ParallelBitmapPopulate was documented but didn't exist.
- ParallelBitmapScan was not documented (I think this should be called
"ParallelBitmapScanInit" instead.)
- Logical replication wait events weren't documented
- various symbols had been added in dartboard order in various places.
Put them in alphabetical order instead, as was originally intended.
Discussion: https://postgr.es/m/20170808181131.mu4fjepuh5m75cyq@alvherre.pgsql
We've heard occasional reports of backend launch failing because
pgwin32_ReserveSharedMemoryRegion() fails, indicating that something
has already used that address space in the child process. It's not
very clear what, given that we disable ASLR in Windows builds, but
suspicion falls on antivirus products. It'd be better if we didn't
have to disable ASLR, anyway. So let's try to ameliorate the problem
by retrying the process launch after such a failure, up to 100 times.
Patch by me, based on previous work by Amit Kapila and others.
This is a longstanding issue, so back-patch to all supported branches.
Discussion: https://postgr.es/m/CAA4eK1+R6hSx6t_yvwtx+NRzneVp+MRqXAdGJZChcau8Uij-8g@mail.gmail.com
Traditionally, "pg_ctl start -w" has waited for the server to become
ready to accept connections by attempting a connection once per second.
That has the major problem that connection issues (for instance, a
kernel packet filter blocking traffic) can't be reliably told apart
from server startup issues, and the minor problem that if server startup
isn't quick, we accumulate "the database system is starting up" spam
in the server log. We've hacked around many of the possible connection
issues, but it resulted in ugly and complicated code in pg_ctl.c.
In commit c61559ec3, I changed the probe rate to every tenth of a second.
That prompted Jeff Janes to complain that the log-spam problem had become
much worse. In the ensuing discussion, Andres Freund pointed out that
we could dispense with connection attempts altogether if the postmaster
were changed to report its status in postmaster.pid, which "pg_ctl start"
already relies on being able to read. This patch implements that, teaching
postmaster.c to report a status string into the pidfile at the same
state-change points already identified as being of interest for systemd
status reporting (cf commit 7d17e683f). pg_ctl no longer needs to link
with libpq at all; all its functions now depend on reading server files.
In support of this, teach AddToDataDirLockFile() to allow addition of
postmaster.pid lines in not-necessarily-sequential order. This is needed
on Windows where the SHMEM_KEY line will never be written at all. We still
have the restriction that we don't want to truncate the pidfile; document
the reasons for that a bit better.
Also, fix the pg_ctl TAP tests so they'll notice if "start -w" mode
is broken --- before, they'd just wait out the sixty seconds until
the loop gives up, and then report success anyway. (Yes, I found that
out the hard way.)
While at it, arrange for pg_ctl to not need to #include miscadmin.h;
as a rather low-level backend header, requiring that to be compilable
client-side is pretty dubious. This requires moving the #define's
associated with the pidfile into a new header file, and moving
PG_BACKEND_VERSIONSTR someplace else. For lack of a clearly better
"someplace else", I put it into port.h, beside the declaration of
find_other_exec(), since most users of that macro are passing the value to
find_other_exec(). (initdb still depends on miscadmin.h, but at least
pg_ctl and pg_upgrade no longer do.)
In passing, fix main.c so that PG_BACKEND_VERSIONSTR actually defines the
output of "postgres -V", which remarkably it had never done before.
Discussion: https://postgr.es/m/CAMkU=1xJW8e+CTotojOMBd-yzUvD0e_JZu2xHo=MnuZ4__m7Pg@mail.gmail.com
When a walreceiver dies, the startup process will notice that and send
a PMSIGNAL_START_WALRECEIVER signal to the postmaster, asking for a new
walreceiver to be launched. There's a race condition, which at least
in HEAD is very easy to hit, whereby the postmaster might see that
signal before it processes the SIGCHLD from the walreceiver process.
In that situation, sigusr1_handler() just dropped the start request
on the floor, reasoning that it must be redundant. Eventually, after
10 seconds (WALRCV_STARTUP_TIMEOUT), the startup process would make a
fresh request --- but that's a long time if the connection could have
been re-established almost immediately.
Fix it by setting a state flag inside the postmaster that we won't
clear until we do launch a walreceiver. In cases where that results
in an extra walreceiver launch, it's up to the walreceiver to realize
it's unwanted and go away --- but we have, and need, that logic anyway
for the opposite race case.
I came across this through investigating unexpected delays in the
src/test/recovery TAP tests: it manifests there in test cases where
a master server is stopped and restarted while leaving streaming
slaves active.
This logic has been broken all along, so back-patch to all supported
branches.
Discussion: https://postgr.es/m/21344.1498494720@sss.pgh.pa.us
The stats collector disregards inquiry messages that bear a cutoff_time
before when it last wrote the relevant stats file. That's fine, but at
startup when it reads the "permanent" stats files, it absorbed their
timestamps as if they were the times at which the corresponding temporary
stats files had been written. In reality, of course, there's no data
out there at all. This led to disregarding inquiry messages soon after
startup if the postmaster had been shut down and restarted within less
than PGSTAT_STAT_INTERVAL; which is a pretty common scenario, both for
testing and in the field. Requesting backends would hang for 10 seconds
and then report failure to read statistics, unless they got bailed out
by some other backend coming along and making a newer request within
that interval.
I came across this through investigating unexpected delays in the
src/test/recovery TAP tests: it manifests there because the autovacuum
launcher hangs for 10 seconds when it can't get statistics at startup,
thus preventing a second shutdown from occurring promptly. We might
want to do some things in the autovac code to make it less prone to
getting stuck that way, but this change is a good bug fix regardless.
In passing, also fix pgstat_read_statsfiles() to ensure that it
re-zeroes its global stats variables if they are corrupted by a
short read from the stats file. (Other reads in that function
go into temp variables, so that the issue doesn't arise.)
This has been broken since we created the separation between permanent
and temporary stats files in 8.4, so back-patch to all supported branches.
Discussion: https://postgr.es/m/16860.1498442626@sss.pgh.pa.us
The autovacuum launcher doesn't actually do anything with its DSA other
than creating it and attaching to it, but it's been observed that after
longjmp'ing to the standard error handling block (for example after
getting SIGINT) the autovacuum enters an infinite loop reporting that it
cannot attach to its DSA anymore (which is correct, because it's already
attached to it.) Fix by only attempting to attach if not already
attached.
I introduced this bug together with BRIN autosummarization in
7526e10224.
Reported-by: Yugo Nagata.
Author: Thomas Munro. I added the comment to go with it.
Discussion: https://postgr.es/m/20170621211538.0c9eae73.nagata@sraoss.co.jp
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4d wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
The new indent version includes numerous fixes thanks to Piotr Stefaniak.
The main changes visible in this commit are:
* Nicer formatting of function-pointer declarations.
* No longer unexpectedly removes spaces in expressions using casts,
sizeof, or offsetof.
* No longer wants to add a space in "struct structname *varname", as
well as some similar cases for const- or volatile-qualified pointers.
* Declarations using PG_USED_FOR_ASSERTS_ONLY are formatted more nicely.
* Fixes bug where comments following declarations were sometimes placed
with no space separating them from the code.
* Fixes some odd decisions for comments following case labels.
* Fixes some cases where comments following code were indented to less
than the expected column 33.
On the less good side, it now tends to put more whitespace around typedef
names that are not listed in typedefs.list. This might encourage us to
put more effort into typedef name collection; it's not really a bug in
indent itself.
There are more changes coming after this round, having to do with comment
indentation and alignment of lines appearing within parentheses. I wanted
to limit the size of the diffs to something that could be reviewed without
one's eyes completely glazing over, so it seemed better to split up the
changes as much as practical.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
The larger part of this patch replaces usages of MyProc->procLatch
with MyLatch. The latter works even early during backend startup,
where MyProc->procLatch doesn't yet. While the affected code
shouldn't run in cases where it's not initialized, it might get copied
into places where it might. Using MyLatch is simpler and a bit faster
to boot, so there's little point to stick with the previous coding.
While doing so I noticed some weaknesses around newly introduced uses
of latches that could lead to missed events, and an omitted
CHECK_FOR_INTERRUPTS() call in worker_spi.
As all the actual bugs are in v10 code, there doesn't seem to be
sufficient reason to backpatch this.
Author: Andres Freund
Discussion:
https://postgr.es/m/20170606195321.sjmenrfgl2nu6j63@alap3.anarazel.dehttps://postgr.es/m/20170606210405.sim3yl6vpudhmufo@alap3.anarazel.de
Backpatch: -
This reverts commit 086221cf6b, which
was made to master only.
The approach implemented in the above commit has some issues. While
those could easily be fixed incrementally, doing so would make
backpatching considerably harder, so instead first revert this patch.
Discussion: https://postgr.es/m/20170602002912.tqlwn4gymzlxpvs2@alap3.anarazel.de
Since commit 4e37b3e15, buildfarm member frogmouth has been failing
occasionally with symptoms indicating that some expected stats data is
getting dropped. The reason that that commit changed the behavior seems
probably to be that more data is getting shoved at the collector in a short
span of time. In current sources, the stats test's first session sends
about 9KB of data while exiting, which is probably the same as what was
sent just before wait_for_stats() in the previous test design. But now,
the test's second session is starting up concurrently, and it sends another
2KB (presumably reflecting its initial catalog accesses). Since frogmouth
is running on Windows XP, which reputedly has a default socket receive
buffer size of only 8KB, it is not very surprising if this has put us over
the threshold where the receive buffer can overflow and drop messages.
The same mechanism could very easily explain the intermittent stats test
failures we've been seeing for years, since background processes such
as the bgwriter will sometimes send data concurrently with all this, and
could thus cause occasional buffer overflows.
Hence, insert some code into pgstat_init() to increase the stats socket's
receive buffer size to 100KB if it's less than that. (On failure, emit a
LOG message, but keep going.) Modern systems seem to have default sizes
in the range of 100KB-250KB, but older platforms don't. I couldn't find
any platforms that wouldn't accept 100KB, so in theory this won't cause
any portability problems.
If this is successful at reducing the buildfarm failure rate in HEAD,
we should back-patch it, because it's certain that similar buffer overflows
happen in the field on platforms with small buffer sizes. Going forward,
there might be an argument for trying to increase the buffer size even
more, but let's take a baby step first.
Discussion: https://postgr.es/m/22173.1494788088@sss.pgh.pa.us
Code review for commit 090010f2e.
Fix cases where an elog(ERROR) partway through a function would leave the
persistent data structures in a corrupt state. pgstat_report_stat got this
wrong by invalidating PgStat_TableEntry structs before removing hashtable
entries pointing to them, and get_tabstat_entry got it wrong by ignoring
the possibility of palloc failure after it had already created a hashtable
entry.
Also, avoid leaking a memory context per transaction, which the previous
code did through misunderstanding hash_create's API. We do not need to
create a context to hold the hash table; hash_create will do that.
(The leak wasn't that large, amounting to only a memory context header
per iteration, but it's still surprising that nobody noticed it yet.)
Since 6ef2eba3f5 ("Skip checkpoints, archiving on idle systems."),
GetLastImportantRecPtr() is used to avoid performing superfluous
checkpoints, xlog switches, running-xact records when the system is
idle. Unfortunately the check concerning running-xact records had a
off-by-one error, leading to such records being potentially skipped
when only a single record has been inserted since the last
running-xact record.
An alternative approach would have been to change
GetLastImportantRecPtr()'s definition to point to the end of records,
but that would make the checkpoint code more complicated.
Author: Andres Freund
Discussion: https://postgr.es/m/20170505012447.wsrympaxnfis6ojt@alap3.anarazel.de
Backpatch: no, code only present in master
When the checkpointer writes the shutdown checkpoint, it checks
afterwards whether any WAL has been written since it started and throws
a PANIC if so. At that point, only walsenders are still active, so one
might think this could not happen, but walsenders can also generate WAL,
for instance in BASE_BACKUP and certain variants of
CREATE_REPLICATION_SLOT. So they can trigger this panic if such a
command is run while the shutdown checkpoint is being written.
To fix this, divide the walsender shutdown into two phases. First, the
postmaster sends a SIGUSR2 signal to all walsenders. The walsenders
then put themselves into the "stopping" state. In this state, they
reject any new commands. (For simplicity, we reject all new commands,
so that in the future we do not have to track meticulously which
commands might generate WAL.) The checkpointer waits for all walsenders
to reach this state before proceeding with the shutdown checkpoint.
After the shutdown checkpoint is done, the postmaster sends
SIGINT (previously unused) to the walsenders. This triggers the
existing shutdown behavior of sending out the shutdown checkpoint record
and then terminating.
Author: Michael Paquier <michael.paquier@gmail.com>
Reported-by: Fujii Masao <masao.fujii@gmail.com>
Previously, maybe_start_bgworker() would launch at most one bgworker
process per call, on the grounds that the postmaster might otherwise
neglect its other duties for too long. However, that seems overly
conservative, especially since bad effects only become obvious when
many hundreds of bgworkers need to be launched at once. On the other
side of the coin is that the existing logic could result in substantial
delay of bgworker launches, because ServerLoop isn't guaranteed to
iterate immediately after a signal arrives. (My attempt to fix that
by using pselect(2) encountered too many portability question marks,
and in any case could not help on platforms without pselect().)
One could also question the wisdom of using an O(N^2) processing
method if the system is intended to support so many bgworkers.
As a compromise, allow that function to launch up to 100 bgworkers
per call (and in consequence, rename it to maybe_start_bgworkers).
This will allow any normal parallel-query request for workers
to be satisfied immediately during sigusr1_handler, avoiding the
question of whether ServerLoop will be able to launch more promptly.
There is talk of rewriting the postmaster to use a WaitEventSet to
avoid the signal-response-delay problem, but I'd argue that this change
should be kept even after that happens (if it ever does).
Backpatch to 9.6 where parallel query was added. The issue exists
before that, but previous uses of bgworkers typically aren't as
sensitive to how quickly they get launched.
Discussion: https://postgr.es/m/4707.1493221358@sss.pgh.pa.us
This reverts commit 81069a9efc.
Buildfarm results suggest that some platforms have versions of pselect(2)
that are not merely non-atomic, but flat out non-functional. Revert the
use-pselect patch to confirm this diagnosis (and exclude the no-SA_RESTART
patch as the source of trouble). If it's so, we should probably look into
blacklisting specific platforms that have broken pselect.
Discussion: https://postgr.es/m/9696.1493072081@sss.pgh.pa.us
Traditionally we've unblocked signals, called select(2), and then blocked
signals again. The code expects that the select() will be cancelled with
EINTR if an interrupt occurs; but there's a race condition, which is that
an already-pending signal will be delivered as soon as we unblock, and then
when we reach select() there will be nothing preventing it from waiting.
This can result in a long delay before we perform any action that
ServerLoop was supposed to have taken in response to the signal. As with
the somewhat-similar symptoms fixed by commit 893902085, the main practical
problem is slow launching of parallel workers. The window for trouble is
usually pretty short, corresponding to one iteration of ServerLoop; but
it's not negligible.
To fix, use pselect(2) in place of select(2) where available, as that's
designed to solve exactly this problem. Where not available, we continue
to use the old way, and are no worse off than before.
pselect(2) has been required by POSIX since about 2001, so most modern
platforms should have it. A bigger portability issue is that some
implementations are said to be non-atomic, ie pselect() isn't really
any different from unblock/select/reblock. Still, we're no worse off
than before on such a platform.
There is talk of rewriting the postmaster to use a WaitEventSet and
not do signal response work in signal handlers, at which point this
could be reverted, since we'd be using a self-pipe to solve the race
condition. But that's not happening before v11 at the earliest.
Back-patch to 9.6. The problem exists much further back, but the
worst symptom arises only in connection with parallel query, so it
does not seem worth taking any portability risks in older branches.
Discussion: https://postgr.es/m/9205.1492833041@sss.pgh.pa.us
The postmaster keeps signals blocked everywhere except while waiting
for something to happen in ServerLoop(). The code expects that the
select(2) will be cancelled with EINTR if an interrupt occurs; without
that, followup actions that should be performed by ServerLoop() itself
will be delayed. However, some platforms interpret the SA_RESTART
signal flag as meaning that they should restart rather than cancel
the select(2). Worse yet, some of them restart it with the original
timeout delay, meaning that a steady stream of signal interrupts can
prevent ServerLoop() from iterating at all if there are no incoming
connection requests.
Observable symptoms of this, on an affected platform such as HPUX 10,
include extremely slow parallel query startup (possibly as much as
30 seconds) and failure to update timestamps on the postmaster's sockets
and lockfiles when no new connections arrive for a long time.
We can fix this by running the postmaster's signal handlers without
SA_RESTART. That would be quite a scary change if the range of code
where signals are accepted weren't so tiny, but as it is, it seems
safe enough. (Note that postmaster children do, and must, reset all
the handlers before unblocking signals; so this change should not
affect any child process.)
There is talk of rewriting the postmaster to use a WaitEventSet and
not do signal response work in signal handlers, at which point it might
be appropriate to revert this patch. But that's not happening before
v11 at the earliest.
Back-patch to 9.6. The problem exists much further back, but the
worst symptom arises only in connection with parallel query, so it
does not seem worth taking any portability risks in older branches.
Discussion: https://postgr.es/m/9205.1492833041@sss.pgh.pa.us
This corner case didn't behave nicely at all: the postmaster would
(partially) update its state as though the process had started
successfully, and be quite confused thereafter. Fix it to act
like the worker had crashed, instead.
In passing, refactor so that do_start_bgworker contains all the
state-change logic for bgworker launch, rather than just some of it.
Back-patch as far as 9.4. 9.3 contains similar logic, but it's just
enough different that I don't feel comfortable applying the patch
without more study; and the use of bgworkers in 9.3 was so small
that it doesn't seem worth the extra work.
transam/parallel.c is still entirely unprepared for the possibility
of bgworker startup failure, but that seems like material for a
separate patch.
Discussion: https://postgr.es/m/4905.1492813727@sss.pgh.pa.us
The POSIX standard does not say that the success return value for
fcntl(F_SETFD) and fcntl(F_SETFL) is zero; it says only that it's not -1.
We had several calls that were making the stronger assumption. Adjust
them to test specifically for -1 for strict spec compliance.
The standard further leaves open the possibility that the O_NONBLOCK
flag bit is not the only active one in F_SETFL's argument. Formally,
therefore, one ought to get the current flags with F_GETFL and store
them back with only the O_NONBLOCK bit changed when trying to change
the nonblock state. In port/noblock.c, we were doing the full pushup
in pg_set_block but not in pg_set_noblock, which is just weird. Make
both of them do it properly, since they have little business making
any assumptions about the socket they're handed. The other places
where we're issuing F_SETFL are working with FDs we just got from
pipe(2), so it's reasonable to assume the FDs' properties are all
default, so I didn't bother adding F_GETFL steps there.
Also, while pg_set_block deserves some points for trying to do things
right, somebody had decided that it'd be even better to cast fcntl's
third argument to "long". Which is completely loony, because POSIX
clearly says the third argument for an F_SETFL call is "int".
Given the lack of field complaints, these missteps apparently are not
of significance on any common platforms. But they're still wrong,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/30882.1492800880@sss.pgh.pa.us
Peter Eisentraut
Alvaro Herrera
Bruce Momjian
Andres Freund
Robert Haas
Tom Lane