supposing that they should set SHLIB_LINK rather than LDFLAGS_SL. Since these
don't go through Makefile.shlib that was a no-op on most platforms. Also
regularize the few platform-specific Makefiles that did pay attention to
SHLIB_LINK: it seems that the real value of that is to pull in BE_DLLLIBS,
so do that instead. Per buildfarm failures on cygwin.
linking both executables and shared libraries, and we add on LDFLAGS_EX when
linking executables or LDFLAGS_SL when linking shared libraries. This
provides a significantly cleaner way of dealing with link-time switches than
the former behavior. Also, make sure that the various platform-specific
%.so: %.o rules incorporate LDFLAGS and LDFLAGS_SL; most of them missed that
before. (I did not add these variables for the platforms that invoke $(LD)
directly, however. It's not clear if we can do that safely, since for the
most part we assume these variables use CC command-line syntax.)
Per gripe from Aaron Swenson and subsequent investigation.
where to install DATA and DOCS files. This is mainly intended to allow
versioned installation, eg, install into contrib/fooM.N/ rather than
directly into contrib/.
Mark Cave-Ayland
Update install-sh to that from Autoconf 2.63, plus our Darwin-specific
changes (which I simplified a bit). install-sh is now able to install
multiple files in one run, so we could simplify our makefiles sometime.
install-sh also now has a -d option to create directories, so we don't need
mkinstalldirs anymore.
Use AC_PROG_MKDIR_P in configure.in, so we can use mkdir -p when available
instead of install-sh -d. For consistency with the rest of the world,
the corresponding make variable has been renamed from $(mkinstalldirs) to
$(MKDIR_P).
another section if required by the platform (instead of the old way of
building them in section "l" and always transforming them to the
platform-specific section).
This speeds up the installation on common platforms, and it avoids some
funny business with the man page tools and build process.
modules are built. Foremost, it creates a solid distinction between these two
types of targets based on what had already been implemented and duplicated in
ad hoc ways before. Specifically,
- Dynamically loadable modules no longer get a soname. The numbers previously
set in the makefiles were dummy numbers anyway, and the presence of a soname
upset a few packaging tools, so it is nicer not to have one.
- The cumbersome detour taken on installation (build a libfoo.so.0.0.0 and
then override the rule to install foo.so instead) is removed.
- Lots of duplicated code simplified.
has been reinvented about four different times throughout history (aix,
cygwin, win32, darwin/linux) and a lot of the concepts are actually shared,
which the code now shows better.
Oleg Bartunov and Teodor Sigaev, but I did a lot of editorializing,
so anything that's broken is probably my fault.
Documentation is nonexistent as yet, but let's land the patch so we can
get some portability testing done.
installations whose pg_config program does not appear first in the PATH.
Per gripe from Eddie Stanley and subsequent discussions with Fabien Coelho
and others.
pg_regress: there's no other way to cope with testing a relocated
installation. Seems better to call it --psqldir though, since the
only thing we need to find in that case is psql. It'd be better if
we could use find_other_exec, but that's not happening unless we are
willing to install pg_regress alongside psql, which seems unlikely
to happen.
This allows it to be used on Windows without installing mingw
(though you do still need 'diff'), and opens the door to future
improvements such as message localization.
Magnus Hagander and Tom Lane.
no evidence that any currently-supported platform needs this, and good
reason to think that any platform that did need it couldn't use the static
libraries anyway --- libpq, at least, has circular references. Removing
the code shuts up tsort warnings about the circular references on some
platforms.
of postgres.imp file into BE_DLLLIBS macro. This makes the AIX build
work more like the Windows and Darwin builds, which have similar requirements
to mention a backend library when linking shared libraries that will be
dynamically loaded into the backend.
for testing PLs and contrib_regression for testing contrib, instead of
overwriting the core system's regression database as formerly done.
Andrew Dunstan
in terms of macro 'rpathdir', as I proposed a few weeks ago. In itself
this commit shouldn't change the behavior at all, but it opens the door
to using special rpaths for the PL shared libraries, as seems to be
needed for plperl in particular.
$(LD) -x -Bshareable to $(CC) -shared on OpenBSD (I suspect this
should be carried over to the other two as well, but will refrain
pending suggestions from people who actually use those platforms).
Per Stefan Kaltenbrunner.
"make pgxs install by default". It is up to the committers to chose.
(1) there is only one "install" target. no more "install-all-headers".
it simplifies/changes several makefiles.
(2) the documentation reflects the change.
(3) a minor fix on pgxs to use a nicer patch without a double slash.
Fabien Coelho
method. Fix a number of places where shared libraries were linked without
mentioning all the libraries they depend on; the Darwin and AIX ports
are known to require this, and it doesn't seem to hurt any other supported
platforms. (Hence, remove code in pl/tcl makefile that tried to avoid
mentioning other libs if not needed.)
Win32 port is now called 'win32' rather than 'win'
add -lwsock32 on Win32
make gethostname() be only used when kerberos4 is enabled
use /port/getopt.c
new /port/opendir.c routines
disable GUC unix_socket_group on Win32
convert some keywords.c symbols to KEYWORD_P to prevent conflict
create new FCNTL_NONBLOCK macro to turn off socket blocking
create new /include/port.h file that has /port prototypes, move
out of c.h
new /include/port/win32_include dir to hold missing include files
work around ERROR being defined in Win32 includes
contains the patches to Makefile.global.in and Makefile.unixware. The
Makefile.unixware patch has been updated to include the contents of
LD_LIBRARY_PATH, if present, to the -rpath (-R) option. This change
will simplify configuring and building PostgreSQL on systems that
support LD_LIBRARY_PATH. You can set LD_LIBRARY_PATH to include all
the directorys you want to have searched for additional libraries, run
configure, then run make. The paths in LD_LIBRARY_PATH will then be
embedded in the executables via the -rpath (-R) option to the linker,
and so will not require LD_LIBRARY_PATH in order to run.
Billy G. Allie
> > > > found in the postmaster and not included from elsewhere)
> >
> > shared libs on AIX need to be able to resolve all symbols at linkage time.
> > Those two symbols are in backend/utils/SUBSYS.o but not in the postgres
> > executable.
>
> They are defined in backend/utils/mb/conv.c and declared in
> include/mb/pg_wchar.h. They're also linked into the
> postmaster. I don't see anything unusual.
Attached is a patch to fix the mb linking problems on AIX. As a nice side effect
it reduces the duplicate symbol warnings to linking libpq.so and libecpg.so
(all shlibs that are not postmaster loadable modules).
Please apply to current (only affects AIX).
The _LARGE_FILES problem is unfortunately still open, unless Peter
has fixed it per his recent idea.
Zeugswetter Andreas SB SD
Eliminate the mysterious games that the Cygwin build plays with the linker
flag variables. DLLLIBS is gone, use SHLIB_LINK like everyone else.
Detect cygipc in configure, after the linker flags are set up, otherwise
configure might not work at all.
Make sure everything is covered by make clean.
Fix the build of the new conversion procedure modules.
Add new DLLIMPORT markers where required.
Finally, the compiler complains if we use an explicit
-I/usr/local/include, so don't do that. Curiously, -L/usr/local/lib is
still necessary.
patch is low risc, thus could be applied now, but can also wait for 7.3
Old Makefile shows, that -bnoentry is available since 4.1 .
Andreas Zeugswetter
> > -patches as well.
>
> The -Bdynamic probably ought to disappear.
That was there already, but I have no objections. I was trying to
make minimal changes.
Larry Rosenman
> Can someone research this and figure out what the proper solution for
> this is? Seems we are going around in circles if we keep
> adding/removing DLLIMPORT.
I believe that the attached patch is the correct solution -- I apologize
for the gyrations. With the attached patch, Cygwin libpq++ builds
cleanly again. The root cause was that DLLIMPORT was defaulting to
__declspec(dllimport) since BUILDING_DLL was *not* defined when building
the libpq++ DLL.
Unfortunately, to test my patch requires changing the following makefile:
src/interfaces/libpq++/examples/Makefile
and the #includes in all of the *.cc to build against the source tree
instead of the following hardcoded installation directory structure:
/usr/local/pgsql
I was able to manually build
src/interfaces/libpq++/examples/testlibpq0.exe
against my Cygwin libpq++ without errors. However, I have not tried to
actually test testlibpq0.exe.
Is this sufficient? Or, do you want me to clean up libpq++/examples too?
(Or, is it silly to even ask? :,)) Let me know how you want to proceed and
I will submit a patch to pgsql-patches.
Jason Tishler
system. Some systems did not understand the 'l' section, and in general
it wasn't entirely appropriate.
On SCO OpenServer, the man pages won't be installed at all until someone
figures out their man system.
in interfaces/perl5 a brief while ago.
Also, since building PL/Perl without a shared libperl actually works on
some platforms we can enable it there to get some development happening.
I've only checked off linux right now, but others should be added in the
future.
under Cygwin. The root cause of this problem is that (Sun) java is a
native Win32 app and hence does not understand Cygwin Posix style paths.
The solution is to use Cygwin's cygpath utility to convert the Posix style
JDBC installation directory path into a Win32 one before invoking ant.
I'm not sure if my patch is the best way to correct this issue but
my goal was to confine the Cygwin specific constructs to
Jason Tishler
it does not support 64bit integers. AFAIK that's the default data type for
OIDs, so I am not surprised that this does not work. Use gcc instead.
BTW., 7.1 does not compile as is with gcc either, I believed the
required patches made it into the 7.1.1 release but obviously I missed
the deadline.
Since the ports mailing list does not seem to be archived I have attached
a copy of the patch (for 7.1 and 7.1.1).
I've just performed a build of a Watcom compiled version and found a couple
of bugs in the watcom specific part of that patch. Please use the attached
version instead.
Tegge, Bernd