CREATE TABLE / LIKE with a bigint identity column would fail on
platforms where long is 32 bits. Copying the sequence values used
makeInteger(), which would truncate the 64-bit sequence data to 32 bits.
To fix, use makeFloat() instead, like the parser. (This does not
actually make use of floats, but stores the values as strings.)
Bug: #15096
Reviewed-by: Michael Paquier <michael@paquier.xyz>
resowner/README contained advice to use a PG_TRY block to restore the
old CurrentResourceOwner value anywhere that that variable is transiently
changed. That advice was only inconsistently followed, however, and
on reflection it seems like unnecessary overhead. We don't bother
with such a convention for transient CurrentMemoryContext changes,
on the grounds that any (sub)transaction abort will start out by
resetting CurrentMemoryContext to what it wants. But the same is
true of CurrentResourceOwner, so there seems no need to treat it
differently.
Hence, remove PG_TRY blocks that exist only to restore CurrentResourceOwner
before re-throwing the error. There are a couple of places that restore
it along with some other actions, and I left those alone; the restore is
probably unnecessary but no noticeable gain will result from removing it.
Discussion: https://postgr.es/m/5236.1507583529@sss.pgh.pa.us
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4d wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
It's not necessary for it to do that, since OWNED BY requires only ordinary
catalog updates and doesn't affect future sequence values. And pg_upgrade
needs to use OWNED BY without having it change the sequence's relfilenode.
Commit 3d79013b9 broke this by making all forms of ALTER SEQUENCE change
the relfilenode; that seems to be the explanation for the hard-to-reproduce
buildfarm failures we've been seeing since then.
Discussion: https://postgr.es/m/19785.1497215827@sss.pgh.pa.us
Previously the changes to the "data" part of the sequence, i.e. the
one containing the current value, were not transactional, whereas the
definition, including minimum and maximum value were. That leads to
odd behaviour if a schema change is rolled back, with the potential
that out-of-bound sequence values can be returned.
To avoid the issue create a new relfilenode fork whenever ALTER
SEQUENCE is executed, similar to how TRUNCATE ... RESTART IDENTITY
already is already handled.
This commit also makes ALTER SEQUENCE RESTART transactional, as it
seems to be too confusing to have some forms of ALTER SEQUENCE behave
transactionally, some forms not. This way setval() and nextval() are
not transactional, but DDL is, which seems to make sense.
This commit also rolls back parts of the changes made in 3d092fe540
and f8dc1985f as they're now not needed anymore.
Author: Andres Freund
Discussion: https://postgr.es/m/20170522154227.nvafbsm62sjpbxvd@alap3.anarazel.de
Backpatch: Bug is in master/v10 only
In 1753b1b027, the pg_sequence system
catalog was introduced. This made sequence metadata changes
transactional, while the actual sequence values are still behaving
nontransactionally. This requires some refinement in how ALTER
SEQUENCE, which operates on both, locks the sequence and the catalog.
The main problems were:
- Concurrent ALTER SEQUENCE causes "tuple concurrently updated" error,
caused by updates to pg_sequence catalog.
- Sequence WAL writes and catalog updates are not protected by same
lock, which could lead to inconsistent recovery order.
- nextval() disregarding uncommitted ALTER SEQUENCE changes.
To fix, nextval() and friends now lock the sequence using
RowExclusiveLock instead of AccessShareLock. ALTER SEQUENCE locks the
sequence using ShareRowExclusiveLock. This means that nextval() and
ALTER SEQUENCE block each other, and ALTER SEQUENCE on the same sequence
blocks itself. (This was already the case previously for the OWNER TO,
RENAME, and SET SCHEMA variants.) Also, rearrange some code so that the
entire AlterSequence is protected by the lock on the sequence.
As an exception, use reduced locking for ALTER SEQUENCE ... RESTART.
Since that is basically a setval(), it does not require the full locking
of other ALTER SEQUENCE actions. So check whether we are only running a
RESTART and run with less locking if so.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Reported-by: Jason Petersen <jason@citusdata.com>
Reported-by: Andres Freund <andres@anarazel.de>
ALTER SEQUENCE can do nontransactional changes to the sequence (RESTART
clause) and transactional updates to the pg_sequence catalog (most other
clauses). When just calling RESTART, the code would still needlessly do
a catalog update without any changes. This would entangle that
operation in the concurrency issues of a catalog update (causing either
locking or concurrency errors, depending on how that issue is to be
resolved).
Fix by keeping track during options parsing whether a catalog update is
needed, and skip it if not.
Reported-by: Jason Petersen <jason@citusdata.com>
This is the SQL standard-conforming variant of PostgreSQL's serial
columns. It fixes a few usability issues that serial columns have:
- CREATE TABLE / LIKE copies default but refers to same sequence
- cannot add/drop serialness with ALTER TABLE
- dropping default does not drop sequence
- need to grant separate privileges to sequence
- other slight weirdnesses because serial is some kind of special macro
Reviewed-by: Vitaly Burovoy <vitaly.burovoy@gmail.com>
When changing the type of a sequence, adjust the min/max values of the
sequence if it looks like the previous values were the default values.
Previously, it would leave the old values in place, requiring manual
adjustments even in the usual/default cases.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Reviewed-by: Vitaly Burovoy <vitaly.burovoy@gmail.com>
This makes almost all core code follow the policy introduced in the
previous commit. Specific decisions:
- Text search support functions with char* and length arguments, such as
prsstart and lexize, may receive unaligned strings. I doubt
maintainers of non-core text search code will notice.
- Use plain VARDATA() on values detoasted or synthesized earlier in the
same function. Use VARDATA_ANY() on varlenas sourced outside the
function, even if they happen to always have four-byte headers. As an
exception, retain the universal practice of using VARDATA() on return
values of SendFunctionCall().
- Retain PG_GETARG_BYTEA_P() in pageinspect. (Page images are too large
for a one-byte header, so this misses no optimization.) Sites that do
not call get_page_from_raw() typically need the four-byte alignment.
- For now, do not change btree_gist. Its use of four-byte headers in
memory is partly entangled with storage of 4-byte headers inside
GBT_VARKEY, on disk.
- For now, do not change gtrgm_consistent() or gtrgm_distance(). They
incorporate the varlena header into a cache, and there are multiple
credible implementation strategies to consider.
This stores a data type, required to be an integer type, with the
sequence. The sequences min and max values default to the range
supported by the type, and they cannot be set to values exceeding that
range. The internal implementation of the sequence is not affected.
Change the serial types to create sequences of the appropriate type.
This makes sure that the min and max values of the sequence for a serial
column match the range of values supported by the table column. So the
sequence can no longer overflow the table column.
This also makes monitoring for sequence exhaustion/wraparound easier,
which currently requires various contortions to cross-reference the
sequences with the table columns they are used with.
This commit also effectively reverts the pg_sequence column reordering
in f3b421da5f, because the new seqtypid
column allows us to fill the hole in the struct and create a more
natural overall column ordering.
Reviewed-by: Steve Singer <steve@ssinger.info>
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
When the new GUC wal_consistency_checking is set to a non-empty value,
it triggers recording of additional full-page images, which are
compared on the standby against the results of applying the WAL record
(without regard to those full-page images). Allowable differences
such as hints are masked out, and the resulting pages are compared;
any difference results in a FATAL error on the standby.
Kuntal Ghosh, based on earlier patches by Michael Paquier and Heikki
Linnakangas. Extensively reviewed and revised by Michael Paquier and
by me, with additional reviews and comments from Amit Kapila, Álvaro
Herrera, Simon Riggs, and Peter Eisentraut.
This extends the work done in commit 2f5c9d9c9 to provide a more nearly
complete abstraction layer hiding the details of index updating for catalog
changes. That commit only invented abstractions for catalog inserts and
updates, leaving nearby code for catalog deletes still calling the
heap-level routines directly. That seems rather ugly from here, and it
does little to help if we ever want to shift to a storage system in which
indexing work is needed at delete time.
Hence, create a wrapper function CatalogTupleDelete(), and replace calls
of simple_heap_delete() on catalog tuples with it. There are now very
few direct calls of [simple_]heap_delete remaining in the tree.
Discussion: https://postgr.es/m/462.1485902736@sss.pgh.pa.us
Split the existing CatalogUpdateIndexes into two different routines,
CatalogTupleInsert and CatalogTupleUpdate, which do both the heap
insert/update plus the index update. This removes over 300 lines of
boilerplate code all over src/backend/catalog/ and src/backend/commands.
The resulting code is much more pleasing to the eye.
Also, by encapsulating what happens in detail during an UPDATE, this
facilitates the upcoming WARM patch, which is going to add a few more
lines to the update case making the boilerplate even more boring.
The original CatalogUpdateIndexes is removed; there was only one use
left, and since it's just three lines, we can as well expand it in place
there. We could keep it, but WARM is going to break all the UPDATE
out-of-core callsites anyway, so there seems to be no benefit in doing
so.
Author: Pavan Deolasee
Discussion: https://www.postgr.es/m/CABOikdOcFYSZ4vA2gYfs=M2cdXzXX4qGHeEiW3fu9PCfkHLa2A@mail.gmail.com
For some reason that is lost in history, a descending sequence would
default its minimum value to -2^63+1 (-PG_INT64_MAX) instead of
-2^63 (PG_INT64_MIN), even though explicitly specifying a minimum value
of -2^63 would work. Fix this inconsistency by using the full range by
default.
Reported-by: Daniel Verite <daniel@manitou-mail.org>
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
On AIX, doubles are aligned at 4 bytes, but int64 is aligned at 8 bytes.
Our code assumes that doubles have alignment that can also be applied to
int64, but that fails in this case. One effect is that
heap_form_tuple() writes tuples in a different layout than
Form_pg_sequence expects.
Rather than rewrite the whole alignment code, work around the issue by
reordering the columns in pg_sequence so that the first int64 column
naturally comes out at an 8-byte boundary.
Move sequence metadata (start, increment, etc.) into a proper system
catalog instead of storing it in the sequence heap object. This
separates the metadata from the sequence data. Sequence metadata is now
operated on transactionally by DDL commands, whereas previously
rollbacks of sequence-related DDL commands would be ignored.
Reviewed-by: Andreas Karlsson <andreas@proxel.se>
Table partitioning is like table inheritance and reuses much of the
existing infrastructure, but there are some important differences.
The parent is called a partitioned table and is always empty; it may
not have indexes or non-inherited constraints, since those make no
sense for a relation with no data of its own. The children are called
partitions and contain all of the actual data. Each partition has an
implicit partitioning constraint. Multiple inheritance is not
allowed, and partitioning and inheritance can't be mixed. Partitions
can't have extra columns and may not allow nulls unless the parent
does. Tuples inserted into the parent are automatically routed to the
correct partition, so tuple-routing ON INSERT triggers are not needed.
Tuple routing isn't yet supported for partitions which are foreign
tables, and it doesn't handle updates that cross partition boundaries.
Currently, tables can be range-partitioned or list-partitioned. List
partitioning is limited to a single column, but range partitioning can
involve multiple columns. A partitioning "column" can be an
expression.
Because table partitioning is less general than table inheritance, it
is hoped that it will be easier to reason about properties of
partitions, and therefore that this will serve as a better foundation
for a variety of possible optimizations, including query planner
optimizations. The tuple routing based which this patch does based on
the implicit partitioning constraints is an example of this, but it
seems likely that many other useful optimizations are also possible.
Amit Langote, reviewed and tested by Robert Haas, Ashutosh Bapat,
Amit Kapila, Rajkumar Raghuwanshi, Corey Huinker, Jaime Casanova,
Rushabh Lathia, Erik Rijkers, among others. Minor revisions by me.
Like pg_tables, pg_views, and others, this view contains information
about sequences in a way that is independent of the system catalog
layout but more comprehensive than the information schema.
To help implement the view, add a new internal function
pg_sequence_last_value() to return the last value of a sequence. This
is kept separate from pg_sequence_parameters() to separate querying
run-time state from catalog-like information.
Reviewed-by: Andreas Karlsson <andreas@proxel.se>
Add a location field to the DefElem struct, used to parse many utility
commands. Update various error messages to supply error position
information.
To propogate the error position information in a more systematic way,
create a ParseState in standard_ProcessUtility() and pass that to
interested functions implementing the utility commands. This seems
better than passing the query string and then reassembling a parse state
ad hoc, which violates the encapsulation of the ParseState type.
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
The reverted changes were intended to force a choice of whether any
newly-added BufferGetPage() calls needed to be accompanied by a
test of the snapshot age, to support the "snapshot too old"
feature. Such an accompanying test is needed in about 7% of the
cases, where the page is being used as part of a scan rather than
positioning for other purposes (such as DML or vacuuming). The
additional effort required for back-patching, and the doubt whether
the intended benefit would really be there, have indicated it is
best just to rely on developers to do the right thing based on
comments and existing usage, as we do with many other conventions.
This change should have little or no effect on generated executable
code.
Motivated by the back-patching pain of Tom Lane and Robert Haas
This patch is a no-op patch which is intended to reduce the chances
of failures of omission once the functional part of the "snapshot
too old" patch goes in. It adds parameters for snapshot, relation,
and an enum to specify whether the snapshot age check needs to be
done for the page at this point. This initial patch passes NULL
for the first two new parameters and BGP_NO_SNAPSHOT_TEST for the
third. The follow-on patch will change the places where the test
needs to be made.
Use "a" and "an" correctly, mostly in comments. Two error messages were
also fixed (they were just elogs, so no translation work required). Two
function comments in pg_proc.h were also fixed. Etsuro Fujita reported one
of these, but I found a lot more with grep.
Also fix a few other typos spotted while grepping for the a/an typos.
For example, "consists out of ..." -> "consists of ...". Plus a "though"/
"through" mixup reported by Euler Taveira.
Many of these typos were in old code, which would be nice to backpatch to
make future backpatching easier. But much of the code was new, and I didn't
feel like crafting separate patches for each branch. So no backpatching.
This does four basic things. First, it provides convenience routines
to coordinate the startup and shutdown of parallel workers. Second,
it synchronizes various pieces of state (e.g. GUCs, combo CID
mappings, transaction snapshot) from the parallel group leader to the
worker processes. Third, it prohibits various operations that would
result in unsafe changes to that state while parallelism is active.
Finally, it propagates events that would result in an ErrorResponse,
NoticeResponse, or NotifyResponse message being sent to the client
from the parallel workers back to the master, from which they can then
be sent on to the client.
Robert Haas, Amit Kapila, Noah Misch, Rushabh Lathia, Jeevan Chalke.
Suggestions and review from Andres Freund, Heikki Linnakangas, Noah
Misch, Simon Riggs, Euler Taveira, and Jim Nasby.
The changed routines are mostly those that can be directly called by
ProcessUtilitySlow; the intention is to make the affected object
information more precise, in support for future event trigger changes.
Originally it was envisioned that the OID of the affected object would
be enough, and in most cases that is correct, but upon actually
implementing the event trigger changes it turned out that ObjectAddress
is more widely useful.
Additionally, some command execution routines grew an output argument
that's an object address which provides further info about the executed
command. To wit:
* for ALTER DOMAIN / ADD CONSTRAINT, it corresponds to the address of
the new constraint
* for ALTER OBJECT / SET SCHEMA, it corresponds to the address of the
schema that originally contained the object.
* for ALTER EXTENSION {ADD, DROP} OBJECT, it corresponds to the address
of the object added to or dropped from the extension.
There's no user-visible change in this commit, and no functional change
either.
Discussion: 20150218213255.GC6717@tamriel.snowman.net
Reviewed-By: Stephen Frost, Andres Freund
Up to now RecordTransactionCommit() waited for WAL to be flushed (if
synchronous_commit != off) and to be synchronously replicated (if
enabled), even if a transaction did not have a xid assigned. The primary
reason for that is that sequence's nextval() did not assign a xid, but
are worthwhile to wait for on commit.
This can be problematic because sometimes read only transactions do
write WAL, e.g. HOT page prune records. That then could lead to read only
transactions having to wait during commit. Not something people expect
in a read only transaction.
This lead to such strange symptoms as backends being seemingly stuck
during connection establishment when all synchronous replicas are
down. Especially annoying when said stuck connection is the standby
trying to reconnect to allow syncrep again...
This behavior also is involved in a rather complicated <= 9.4 bug where
the transaction started by catchup interrupt processing waited for
syncrep using latches, but didn't get the wakeup because it was already
running inside the same overloaded signal handler. Fix the issue here
doesn't properly solve that issue, merely papers over the problems. In
9.5 catchup interrupts aren't processed out of signal handlers anymore.
To fix all this, make nextval() acquire a top level xid, and only wait for
transaction commit if a transaction both acquired a xid and emitted WAL
records. If only a xid has been assigned we don't uselessly want to
wait just because of writes to temporary/unlogged tables; if only WAL
has been written we don't want to wait just because of HOT prunes.
The xid assignment in nextval() is unlikely to cause overhead in
real-world workloads. For one it only happens SEQ_LOG_VALS/32 values
anyway, for another only usage of nextval() without using the result in
an insert or similar is affected.
Discussion: 20150223165359.GF30784@awork2.anarazel.de,
369698E947874884A77849D8FE3680C2@maumau,
5CF4ABBA67674088B3941894E22A0D25@maumau
Per complaint from maumau and Thom Brown
Backpatch all the way back; 9.0 doesn't have syncrep, but it seems
better to be consistent behavior across all maintained branches.
Previously, if you wanted anything besides C-string hash keys, you had to
specify a custom hashing function to hash_create(). Nearly all such
callers were specifying tag_hash or oid_hash; which is tedious, and rather
error-prone, since a caller could easily miss the opportunity to optimize
by using hash_uint32 when appropriate. Replace this with a design whereby
callers using simple binary-data keys just specify HASH_BLOBS and don't
need to mess with specific support functions. hash_create() itself will
take care of optimizing when the key size is four bytes.
This nets out saving a few hundred bytes of code space, and offers
a measurable performance improvement in tidbitmap.c (which was not
exploiting the opportunity to use hash_uint32 for its 4-byte keys).
There might be some wins elsewhere too, I didn't analyze closely.
In future we could look into offering a similar optimized hashing function
for 8-byte keys. Under this design that could be done in a centralized
and machine-independent fashion, whereas getting it right for keys of
platform-dependent sizes would've been notationally painful before.
For the moment, the old way still works fine, so as not to break source
code compatibility for loadable modules. Eventually we might want to
remove tag_hash and friends from the exported API altogether, since there's
no real need for them to be explicitly referenced from outside dynahash.c.
Teodor Sigaev and Tom Lane
Each WAL record now carries information about the modified relation and
block(s) in a standardized format. That makes it easier to write tools that
need that information, like pg_rewind, prefetching the blocks to speed up
recovery, etc.
There's a whole new API for building WAL records, replacing the XLogRecData
chains used previously. The new API consists of XLogRegister* functions,
which are called for each buffer and chunk of data that is added to the
record. The new API also gives more control over when a full-page image is
written, by passing flags to the XLogRegisterBuffer function.
This also simplifies the XLogReadBufferForRedo() calls. The function can dig
the relation and block number from the WAL record, so they no longer need to
be passed as arguments.
For the convenience of redo routines, XLogReader now disects each WAL record
after reading it, copying the main data part and the per-block data into
MAXALIGNed buffers. The data chunks are not aligned within the WAL record,
but the redo routines can assume that the pointers returned by XLogRecGet*
functions are. Redo routines are now passed the XLogReaderState, which
contains the record in the already-disected format, instead of the plain
XLogRecord.
The new record format also makes the fixed size XLogRecord header smaller,
by removing the xl_len field. The length of the "main data" portion is now
stored at the end of the WAL record, and there's a separate header after
XLogRecord for it. The alignment padding at the end of XLogRecord is also
removed. This compansates for the fact that the new format would otherwise
be more bulky than the old format.
Reviewed by Andres Freund, Amit Kapila, Michael Paquier, Alvaro Herrera,
Fujii Masao.
Buildfarm members with CLOBBER_CACHE_ALWAYS advised us that commit
85b506bbfc was mistaken in setting the relpersistence value of the
index directly in the relcache entry, within reindex_index. The reason
for the failure is that an invalidation message that comes after mucking
with the relcache entry directly, but before writing it to the catalogs,
would cause the entry to become rebuilt in place from catalogs with the
old contents, losing the update.
Fix by passing the correct persistence value to
RelationSetNewRelfilenode instead; this routine also writes the updated
tuple to pg_class, avoiding the problem. Suggested by Tom Lane.
xlog.c is huge, this makes it a little bit smaller, which is nice. Functions
related to putting together the WAL record are in xloginsert.c, and the
lower level stuff for managing WAL buffers and such are in xlog.c.
Also move the definition of XLogRecord to a separate header file. This
causes churn in the #includes of all the files that write WAL records, and
redo routines, but it avoids pulling in xlog.h into most places.
Reviewed by Michael Paquier, Alvaro Herrera, Andres Freund and Amit Kapila.
In a couple of code paths, pg_class_aclcheck is called in succession
with multiple different modes set. This patch combines those modes to
have a single call of this function and reduce a bit process overhead
for permission checking.
Author: Michael Paquier <michael@otacoo.com>
Reviewed-by: Fabrízio de Royes Mello <fabriziomello@gmail.com>
Don't use simple_heap_insert to insert the tuple to a sequence relation.
simple_heap_insert creates a heap insertion WAL record, and replaying that
will create a regular heap page without the special area containing the
sequence magic constant, which is wrong for a sequence. That was not a bug
because we always created a sequence WAL record after that, and replaying
that overwrote the bogus heap page, and the transient state could never be
seen by another backend because it was only done when creating a new
sequence relation. But it's simpler and cleaner to avoid that in the first
place.
Instead of changing the tuple xmin to FrozenTransactionId, the combination
of HEAP_XMIN_COMMITTED and HEAP_XMIN_INVALID, which were previously never
set together, is now defined as HEAP_XMIN_FROZEN. A variety of previous
proposals to freeze tuples opportunistically before vacuum_freeze_min_age
is reached have foundered on the objection that replacing xmin by
FrozenTransactionId might hinder debugging efforts when things in this
area go awry; this patch is intended to solve that problem by keeping
the XID around (but largely ignoring the value to which it is set).
Third-party code that checks for HEAP_XMIN_INVALID on tuples where
HEAP_XMIN_COMMITTED might be set will be broken by this change. To fix,
use the new accessor macros in htup_details.h rather than consulting the
bits directly. HeapTupleHeaderGetXmin has been modified to return
FrozenTransactionId when the infomask bits indicate that the tuple is
frozen; use HeapTupleHeaderGetRawXmin when you already know that the
tuple isn't marked commited or frozen, or want the raw value anyway.
We currently do this in routines that display the xmin for user consumption,
in tqual.c where it's known to be safe and important for the avoidance of
extra cycles, and in the function-caching code for various procedural
languages, which shouldn't invalidate the cache just because the tuple
gets frozen.
Robert Haas and Andres Freund
Peter Eisentraut
Bruce Momjian
Tom Lane
Robert Haas
Andres Freund
Noah Misch
Alvaro Herrera
Kevin Grittner
Heikki Linnakangas