Subject: [HACKERS] backend/utils/adt/timestamp.c
Back to this timezone stuff. The struct tm has a field (tm_gmtoff) which
is the offset from UTC (GMT is archaic BTW) in seconds. Is this the
value you are looking for when you use timezone? Note that this applies
to NetBSD but it does not appear to be in either ANSI C or POSIX. This
looks like one of those things that is just going to have to be hand
coded for each platform.
Why not just store the values in UTC and use localtime instead of
gmtime when retrieving the value?
Also, you assume the time is returned as a 4 byte integer. In fact,
there is not even any requirement that time be an integral value. You
should use time_t here.
The input function seems unduly restrictive. Somewhere in the sources
there is an input function that allows words for months. Can't we do
the same here?
There is a standard function, difftime, for subtracting two times. It
deals with cases where time_t is not integral. There is, however, a
small performance hit since it returns a double and I don't believe
there is any system currently which uses anything but an integral for
time_t. Still, this is technically the correct and portable thing to do.
The returns from the various comparisons should probably be a bool.
of endian.h. I figure that if it exists it's pretty sure that it has
the byte order information and we may catch some other ports without
any further testing.
From: "D'Arcy J.M. Cain" <darcy@druid.net>
Subject: [HACKERS] More patches for date/time
I have accumulated several patches to add functionality to the datetime
and timespan data types as well as to fix reported porting bugs on non-BSD
machines. These patches are:
dt.c.patch - add datetime_part(), fix bugs
dt.h.patch - add quarter and timezone support, add prototypes
globals.c.patch - add time and timezone variables
miscadmin.h.patch - add time and timezone variables
nabstime.c.patch - add datetime conversion routine
nabstime.h.patch - add prototypes
pg_operator.h.patch - add datetime operators, clean up formatting
pg_proc.h.patch - add datetime functions, reassign conflicting date OIDs
pg_type.h.patch - add datetime and timespan data types
The dt.c and pg_proc.h patches are fairly large; the latter mostly because I tried
to get some columns for existing entries to line up.
nicer. Also, I grabbed my copy of the Informix manual, and
added a couple of variables that make sense (formats for
money, time, a language setting, a timezone).
- New functions SetPGVariable() and GetPGVariable() in tcop/*.
These don't actually do anything for the moment, but should
be enough to implement the SET var_name TO var_val in the
parser?
SetPGVariable() expects just two strings, the var_name and
the var_value from above, and is expected to do the right thing.
Returns TRUE if everything okay.
From: "Martin J. Laubach" <mjl@wwx.vip.at>
Actually required by multi-column indices support.
We still don't use btree for 'A is (not) null', but
now btree keep items with NULL attrs using single rule
for placing/finding items on pages:
NULLs greater NOT_NULLs and NULL = NULL.
+ Bulkload code (nbtsort.c) support for multi-column indices
building and NULLs.
+ Fix for btendscan()->pfree(scanopaque) from Chris Dunlop.
Subject: [HACKERS] backend/utils/adt/nabstime.c
There is a problem with some of the calls to strftime. The second arg is
missing. In all cases the buffer is CTZName which, according to the
file init/globals.c, is char CTZName[8] so I have added this value.
I know there should be a #define set up for this but I wasn't sure
which header to put it in.
Subject: [HACKERS] libpq/pqcomm stuff and Solaris byte order
I decided to go ahead with the required changes since no one else seems
to. I don't guarantee that it is perfect but with these changes the
package actually compiles. While I was at it I added to the Sparc
Solaris header to define the byte order. Note that NetBSD sets this
in the system headers so it wasn't required there.
In particular, someone may want to check whether I removed the correct
84 lines from backend/libpq/pqcomprim.c.
Subject: [HACKERS] auth.c for kerberos.
I made pgsql with eBones(international version of Kerberos4). The
following modification was needed. And I added read permition for
group to srvtab instead of running postmaster as root.
According to man page under FreeBSD for sys_errlist[], strerror() should be
used instead...not sure if this will break other systems, so only changing
two files for now, and we'll see what "errors" it turns up
of common routines in pqcomprim.c (pq communication primitives).
Not all adapted to it yet, but it's a start.
- Rewritten some of those routines, to write/read bigger chunks of
data, precomputing stuff in buffers instead of sending out byte
by byte.
- As a consequence, I need to know the endianness of the machine.
Currently I rely on getting it from machine/endian.h, but this
may not be available everywhere? (Who the hell thought it was
a good idea to pass integers to the backend the other way around
than the normal network byte order? *argl*)
- Libpq looks in the environment for magic variables, and upon
establishing a connection to the backend, sends it queries
of the form "SET var_name TO 'var_value'". This needs a change
in the backend parser (Mr. Parser, are you there? :)
- Currently it looks for two Env-Vars, namely PG_DATEFORMAT
and PG_FLOATFORMAT. What else makes sense? PG_TIMEFORMAT?
PG_TIMEZONE?
From: "Martin J. Laubach" <mjl@wwx.vip.at>
Subject: [HACKERS] Patches for 970316 compilation
I made a small pre-emptive change in the new datetime code to eliminate
calls to infnan(). Hopefully this will make Solaris (and probably other
non-GNUlib) systems happier. Didn't find fe-connect.h in the 970316
distribution, so made one up. Also, one of the test routines needs an
update for the geo-decls.h -> geo_decls.h name change.
Patches appear below...
Subject: [HACKERS] lock debug trace
This is an update to my previous patches for lock debugging, already applied
to the current sources. It adds some improvements in the output messages and
some more output in WaitOnLock(). I have used with success to trace a nasty
deadlock condition on pg_listener.
> Please apply them to the direcory "backend/optimizer/geqo".
> Two new files with different crossover techniques are included.
> Standard procedure is optimization by means of "geqo_erx.c"
> (Edge Recombination Crossover).
From: "Martin S. Utesch" <utesch@aut.tu-freiberg.de>
Subject: [HACKERS] password authentication
This patch adds support for plaintext password authentication. To use
it, you add a line like
host all 0.0.0.0 0.0.0.0 password pg_pwd.conf
to your pg_hba.conf, where 'pg_pwd.conf' is the name of a file containing
the usernames and password hashes in the format of the first two fields
of a Unix /etc/passwd file. (Of course, you can use a specific database
name or IP instead.)
Then, to connect with a password through libpq, you use the PQconnectdb()
function, specifying the "password=" tag in the connect string and also
adding the tag "authtype=password".
I also added a command-line switch '-u' to psql that tells it to prompt
for a username and password and use password authentication.
Subject: [HACKERS] linux/alpha patches
These patches lay the groundwork for a Linux/Alpha port. The port doesn't
actually work unless you tweak the linker to put all the pointers in the
first 32 bits of the address space, but it's at least a start. It
implements the test-and-set instruction in Alpha assembly, and also fixes
a lot of pointer-to-integer conversions, which is probably good anyway.
Subject: [HACKERS] linux/alpha patches
These patches lay the groundwork for a Linux/Alpha port. The port doesn't
actually work unless you tweak the linker to put all the pointers in the
first 32 bits of the address space, but it's at least a start. It
implements the test-and-set instruction in Alpha assembly, and also fixes
a lot of pointer-to-integer conversions, which is probably good anyway.
Subject: [HACKERS] equal column and table name patch
This fixes a bug where selects fail when there is a column with the same
name as the table it's a part of.
Subject: [HACKERS] better access control error messages
This patch replaces the 'no such class or insufficient privilege' with
distinct error messages that tell you whether the table really doesn't
exist or whether access was denied.
Subject: [HACKERS] backend Makefile patch
This patch cleans up backend/Makefile a little bit, and prevents it from
relinking the backend binary when no changes have been made.
Subject: [HACKERS] abort failed transaction patch
This patch allows you to end a transaction that has failed on an error
using the 'ABORT' statement without generating another error message.
(By default you get an error unless you use 'END' to terminate the
transaction, which has already been aborted anyway.)
The following patch to src/backend/libpq/pqpacket.c provides additional
checking for bad packet length data. It was tested with the Linux telnet
client, with netcat using the numbers.txt and by dumping random numbers
into the port.
Patch by: Alvaro Martinez Echevarria <alvaro@lander.es>
The following patches add to the backend a new debugging flag -K which prints
a debug trace of all locking operations on user relations (those with oid
greater than 20000). The code is compiled only if LOCK_MGR_DEBUG is defined,
so the patch should be harmless if not explicitly enabled.
I'm using the code to trace deadlock conditions caused by application queries
using the command "$POSTMASTER -D $PGDATA -o '-d 1 -K 1'.
The patches are for version 6.0 dated 970126.
Patches from: aoki@CS.Berkeley.EDU (Paul M. Aoki)
i gave jolly my btree bulkload code a long, long time ago but never
gave him a bunch of my bugfixes. here's a diff against the 6.0
baseline.
for some reason, this code has slowed down somewhat relative to the
insertion-build code on very small tables. don't know why -- it used
to be within about 10%. anyway, here are some (highly unscientific!)
timings on a dec 3000/300 for synthetic tables with 10k, 100k and
1000k tuples (basically, 1mb, 10mb and 100mb heaps). 'c' means
clustered (pre-sorted) inputs and 'u' means unclustered (randomly
ordered) inputs. the 10k table basically fits in the buffer pool, but
the 100k and 1000k tables don't. as you can see, insertion build is
fine if you've sorted your heaps on your index key or if your heap
fits in core, but is absolutely horrible on unordered data (yes,
that's 7.5 hours to index 100mb of data...) because of the zillions of
random i/os.
if it doesn't work for you for whatever reason, you can always turn it
back off by flipping the FastBuild flag in nbtree.c. i don't have
time to maintain it.
good luck!
baseline code:
time psql -c 'create index c10 on k10 using btree (c int4_ops)' bttest
real 8.6
time psql -c 'create index u10 on k10 using btree (b int4_ops)' bttest
real 9.1
time psql -c 'create index c100 on k100 using btree (c int4_ops)' bttest
real 59.2
time psql -c 'create index u100 on k100 using btree (b int4_ops)' bttest
real 652.4
time psql -c 'create index c1000 on k1000 using btree (c int4_ops)' bttest
real 636.1
time psql -c 'create index u1000 on k1000 using btree (b int4_ops)' bttest
real 26772.9
bulkloading code:
time psql -c 'create index c10 on k10 using btree (c int4_ops)' bttest
real 11.3
time psql -c 'create index u10 on k10 using btree (b int4_ops)' bttest
real 10.4
time psql -c 'create index c100 on k100 using btree (c int4_ops)' bttest
real 59.5
time psql -c 'create index u100 on k100 using btree (b int4_ops)' bttest
real 63.5
time psql -c 'create index c1000 on k1000 using btree (c int4_ops)' bttest
real 636.9
time psql -c 'create index u1000 on k1000 using btree (b int4_ops)' bttest
real 701.0
|Subject: [PATCH] adding SYS_TIME just for fun.
|
|Hi,
|
|Whilst I was playing round with the European dates patch I noticed the sysfunc()
|that allows you to do :-
|
|create table test ( da date);
|insert into test values (SYS_DATE);
|
|and have the current system date inserted.
|
|So I thought it would be nice to have the SYS_TIME facility too.
|
|I've cloned the function and changed a few things and there you have it,
|you can now do:
|
|create table test2 ( ti time);
|insert into test2 values (SYS_TIME);
The first patch changes the behavior of aclcheck for groups. Currently an user
can access a table only if he has the required permission for ALL the groups
defined for that table. With my patch he can access a table if he has the
permission for ONE of the groups, which seems to me a more useful thing.
If you think this should be the correct behavior of the acl group check feel
free to remove the #ifdef, if not please add a commented line to config.h.
2. IndexScanableOperand now uses match_indexkey_operand
instead of equal_indexkey_var (if we have some index on attribute X
then we shouldn't use it for 'where some_func(X) OP CONST').
/usr/include/limits.h (which quiets the costsize.c warnings)...under
FreeBSD, /usr/include/limits.h *includes* machine/limits.h, while under
Solaris, there is no such things as /usr/include/machine...
Problem with Solaris pointed out by Mark Wahl
1. New flag - BM_JUST_DIRTIED - added for BufferDesc;
2. All data "dirtiers" (WriteBuffer and WriteNoReleaseBuffer)
set this flag (and BM_DIRTY too);
3. All data "flushers" (FlushBuffer, BufferSync and BufferReplace)
turn this flag off just before calling smgr[blind]write/smgrflush
and check this flag after flushing buffer: if it turned ON then
BM_DIRTY will stay ON.
another one in Solaris' port-protos.h.
The following patch will bring inet_aton's prototype into scope for
Ultrix to silence a compilation warning.
If the intention is to have inet_aton's prototype in its own header
filer, the declaration in Solaris' port-protos.h should be removed.
If the declaration in port-protos.h is deemed to be the correct
place, a declaration should be added in Ultrix' port-protos.h
regards
Erik Bertelsen
included after storage/ipc.h like other similar cases that were changed
recently.
This one has popped up during the last few days.
My sources are sup'ed today, 13. jan 1996.
regards
Erik Bertelsen.
At least the first two should be fixed before the final release of 6.0.
1) There is a mismatch between the type declared in the catalog for
the input/output attributes of pg_type and the actual type of
values stored in the table. The type of typinput, typoutput,
typsend and typreceive are declared oid (26) while the values are
regproc (24). The error was there also in previous versions but
nobody noticed it until an Assert has been added in ExecEvalVar.
The effect is that it is now impossible to replace the typoutput
of existing data types with new procs.
2) The identd hba fails after the first time because the data read
from the identd socket is not zero-terminated and strlen reports
an incorrect length if the stack contains garbage, which usually
happens after the first connection has been made.
3) The new initdb wants to create itself the data directory. This
implies that the parent directory must be writable by postgres and
this may not always be desirable. A better solution would be to
allow the directory to be created by root and then filled by initdb.
It would also nice to have some reasonable default for PGLIB and
PGDATA like the previous version did. This applies also to the
postmaster executable.
gmake of the code without interruption.
There's also some tidy-up of the MAXPATHLEN stuff based on the assumption that
all supported platforms have MAXPATHLEN defined in <sys/param.h>.
(The only unknowns for the above are AIX and IRIX5.)
And now - JMP_BUF again. Is it enough, folks ?
Fixed again:
cc1: warnings being treated as errors
exc.c: In function 'ExcRaise':
exc.c:187: warning: passing arg 1 of 'Longjmp' from incompatible pointer type
gmake[3]: *** [exc.o] Error 1
%ud in a printf format strings instead of just %u.
There were three occurances of this in catalog_utils.c,
two in parser.c and one in rewriteSupport.c in the oid
patch that I submitted and was applied. They won't crash
anything, but the error messages will have a 'd' after the
Oid. Annoying, but none are db-threatening.
Sorry about that folks...I'll be more careful in the future...
Darren King
As an example I sent a bug-report on 26 Nov to tell that the fix included
below is necessary to compile pg95-current on Ultrix with Digital's
standard C compiler c89. In fact I think that this fix is needed
for any C compiler sticking very close the standard, see my discussion
in the original bug report.
Erik Bertelsen
cc1: warnings being treated as errors
datum.c: In function `DatumGetSize':
datum.c:57: warning: unsigned value >= 0 is always 1
gmake[3]: *** [datum.o] Error 1
There was:
if (byVal) {
if (len >= 0 && len <= sizeof(Datum)) {
but len has type Size (unsigned int) and so now there is:
if (byVal) {
if (len <= sizeof(Datum)) {
cc1: warnings being treated as errors
exc.c: In function 'ExcRaise':
exc.c:186: warning: passing arg 1 of 'Longjmp' from incompatible pointer type
gmake[3]: *** [exc.o] Error 1
Now we have:
#if defined (JMP_BUF)
longjmp(efp->context, 1);
#else
siglongjmp(efp->context, 1);
#endif
cc1: warnings being treated as errors
transsup.c: In function `TransBlockGetLastTransactionIdStatus':
transsup.c:122: warning: unsigned value >= 0 is always 1
gmake[3]: *** [transsup.o] Error 1
...
(old _bt_compare always returned >= 0 while comparing with P_HIKEY
on root page - it breaks root page when _bt_insertonpg tries insert
new minimal key into root page).
2. Fixed bug concerns "empty" pages: non-rightmost pages with only P_HIKEY
present on it. Such pages appear after vacuum.
as ints and longs. Touches on quite a few function args as
well. Most other files look ok as far as Oids go...still checking
though...
Since Oids are type'd as unsigned ints, they should prolly be used
with the %ud format string in elog and sprintf messages. Not sure
what kind of strangeness that could produce.
Darren King
When an acl item is added or updated the new entry is deleted if it has no
permissions and the acl array is shrinked. This is is done by decrementing
the number of items without updating the corresponding array size.
The array with the incorrect size is later read by pg_aclcheck and the entry
count is used to allocate a new array while the array size is used to copy
the old one. This causes a memory corruption and a backend crash.
This happens only to normal user as the administrator bypasses acl checks.
Massimo Dal Zotto
* Wrote max(date) and min(date) aggregates
* Wrote operator "-" for date; date - date yields number of days
difference
* Wrote operator+(date,int) and operator-(date,int); the int is the
number of days. Each operator returns a new date.
By: Tom Tromey <tromey@creche.cygnus.com>
In particular, no more compiled-in default for PGDATA or LIBDIR. Commands
that need them need either invocation options or environment variables.
PGPORT default is hardcoded as 5432, but overrideable with options or
environment variables.
Changes:
* Unique index capability works using the syntax 'create unique
index'.
* Duplicate OID's in the system tables are removed. I put
little scripts called 'duplicate_oids' and 'find_oid' in
include/catalog that help to find and remove duplicate OID's.
I also moved 'unused_oids' from backend/catalog to
include/catalog, since it has to be in the same directory
as the include files in order to work.
* The backend tries converting the name of a function or aggregate
to all lowercase if the original name given doesn't work (mostly
for compatibility with ODBC).
* You can 'SELECT NULL' to your heart's content.
* I put my _bt_updateitem fix in instead, which uses
_bt_insertonpg so that even if the new key is so big that
the page has to be split, everything still works.
* All literal references to system catalog OID's have been
replaced with references to define'd constants from the catalog
header files.
* I added a couple of node copy functions. I think this was a
preliminary attempt to get rules to work.
I found another bug in btree index. Looking at the code it seems that NULL
keys are never used to build or scan a btree index (see the explain commands
in the example). However this is not the case when a null key is retrieved
in an outer loop of a join select and used in an index scan of an inner loop.
This bug causes at least three kinds of problems:
1) the backend crashes when it tries to compare a text string with a null.
2) it is not possible to find tuples with null keys in a join.
3) null is considered equal to 0 when the datum is passed by value, see
the last query.
Submitted by: Massimo Dal Zotto <dz@cs.unitn.it>
It's bug in nodeAgg.c on lines 241, 242:
null_array = malloc(nagg);
for (i=0;i<nagg;i++)
null_array[i] = 'n';
oneTuple = heap_formtuple(tupType, tupValue, null_array);
- your query has not only aggregates but also 'group by-ed' fields and so
null_array should contain tupType->natts elements (tupType->natts > nagg in
your case).
Patch follows and it's very simple.
VAdim
My guess is that the thing had bugs, and the pfree was commented out.
The thing is probabally free'ed anyway at the end, so it was not a bad
thing.
If it does cause a bug, it will generate an error when hit, so I say
unless someone else knows, let's remove it and run the regression test.
-Bruce
2. Reap unused tuples too
3. Reap empty pages
4. Check if a page is initialized, initialize it if not
and reap it
5. Binary search in list of reapped pages/tids to check
is the heap' tid pointed by a index' tuple on this list
(it's mu-u-uch faster)
cache. I found if I manually added a line to flush the whole relation
cache, the assert error disappeared. Looking through the code, I found
that the relation cache is flushed at the end of each query if the
reference count is zero for the relation. However, printf's showed that
the rd_relcnt(reference count) for the accessed query was not returning
to zero after each query.
It turns out the parser was doing a heap_ropen in parser/analyze.c to
get information about the table's columns, but was not doing a
heap_close.
This was causing the query after the ALTER TABLE ADD to see the old
table structure, and the executor's assert was reporting the problem.
correct way to do this. Theoretically you could have a NULL
pointer that isn't represented internally as all 0 bits. This
guarantees that it convert correctly.
Submitted by: darcy@druid.com (D'Arcy J.M. Cain)
my postmaster 1.07.
It's really simple, the loop dealing with all sockets
can't handle more than one ready socket :-)
A simple logic error dealing with lists.
OR IS THERE ANY REASON FOR SETTING curr TO 0?
Submitted by: Carsten Heyl <Heyl@nads.de>
To: Postgres95-development <pg95-dev@ki.net>
Subject: [PG95-DEV] postgres.h patch
This removes the parameters from the func_ptr prototype in postgres.h in
2.0.
way one creates a database system. Parts that were in "make install"
are not either in "make all" or initdb. Nothing goes in the PGDATA
directory besides user data. Creating multiple database systems is
easier.
In addition to applying the patch, it is necessary to move the file
libpq/pg_hba to backend/libpq/pg_hba.sample.
Submitted by: Bryan Henderson <bryanh@giraffe.netgate.net>
--- src/backend/storage/file/fd.c Thu Sep 12 17:23:38 1996
***************
*** 262,268 ****
Delete(file);
/* save the seek position */
! fileP->seekPos = lseek(fileP->fd, 0L, SEEK_CUR);
Assert( fileP->seekPos != -1);
/* if we have written to the file, sync it */
--- 262,268 ----
Delete(file);
/* save the seek position */
! fileP->seekPos = (long) lseek(fileP->fd, 0L, SEEK_CUR);
Assert( fileP->seekPos != -1);
/* if we have written to the file, sync it */
Submitted by: Randy Terbush <randy@zyzzyva.com>
- Added the header access/heapam.h.
- Changed all instances of "length" to "data_length" to quiet
the compiler.
- initialized a few variables. The compiler couldn't see that
the code guaranteed that these would be initialized before
being dereferenced. If anyone wants to check my work follow
the usage of these variables and make sure that this true
and wasn't actually a bug in the original code.
- added a missing break statement to a default case. This
was a benign error but bad style.
- layed out heap_sysattrlen differently. I think this way
makes the structure of the code crystal clear. There should
be no actual difference in the actual behaviour of the code.
Submitted by: darcy@druid.druid.com (D'Arcy J.M. Cain)
current state of development...namely, we are on 2.0
NOTE:
BTW, the is also a check in postmaster which won't let you use an older
version of the database by checking the version number. The version number
of a database is in data/PG_VERSION (a plain ASCII file).
- Andrew
execute an sql function containing an utility command (create, notify, ...).
The bug is part in the planner, which returns a number of plans different
than the number of commands if there are utility commands in the query, and
in part in the function executor which assumes that all commands are normal
query commands and causes a SIGSEGV trying to execute commands without plan.
Submitted by: Massimo Dal Zotto <dz@cs.unitn.it>
|
|Here's a patch for Version 2 only. It just adds an Assert to catch some
|inconsistencies in the catalog classes.
|
|--
|Bryan Henderson Phone 408-227-6803
|San Jose, California
|
The problem is that the function arguments are not considered as possible key
candidates for index scan and so only a sequential scan is possible inside
the body of a function. I have therefore made some patches to the optimizer
so that indices are now used also by functions. I have also moved the plan
debug message from pg_eval to pg_plan so that it is printed also for plans
genereated for function execution. I had also to add an index rescan to the
executor because it ignored the parameters set in the execution state, they
were flagged as runtime variables in ExecInitIndexScan but then never used
by the executor so that the scan were always done with any key=1. Very odd.
This means that an index rescan is now done twice for each function execution
which uses an index, the first time when the index scan is initialized and
the second when the actual function arguments are finally available for the
execution. I don't know what is the cost of an double index scan but I
suppose it is anyway less than the cost of a full sequential scan, at leat
for large tables. This is my patch, you must also add -DINDEXSCAN_PATCH in
Makefile.global to enable the changes.
Submitted by: Massimo Dal Zotto <dz@cs.unitn.it>
The comparison routines for text and char data type give incorrect results
if the input data contains characters greater than 127. As these routines
perform the comparison using signed char variables all character codes
greater than 127 are interpreted as less than 0. These codes are used to
encode the iso8859 char sets.
The other text-like data types seem to work as expected as they use unsigned
chars in comparisons.
Submitted by: Massimo Dal Zotto <dz@cs.unitn.it>
tree, instead of having include files all over the place...
Immediate goal...a 'config.h' file so that we can make #ifdef's
being used throughout the code more a rarity as far as porting
is concerned
conditions are always met. The patch can be applied to any version
of Postgres95 from 1.02 to 1.05. After applying the patch, queries
using indices on bpchar and varchar fields should (hopefully ;-) )
always return the same tuple set regardless to the fact whether
indices are used or not.
Submitted by: Gerhard Reithofer <tbr_laa@AON.AT>
In a catalog class that has a "name" type attribute, UPDATEing of an
instance of that class may destroy all of the attributes of that
instance that are stored as or after the "name" attribute.
This is caused by the alignment value of the "name" type being set to
"double" in Class pg_type, but "integer" in Class pg_attribute.
Postgres constructs a tuple using double alignment, but interprets it
using integer alignment.
The fix is to change the alignment to integer in pg_type.
Note that this corrects the problem for new Postgres systems. Existing
databases already contain the error and it can't easily be repaired because
this very bug prevents updating the class that contains it.
--
Bryan Henderson Phone 408-227-6803
San Jose, California
It adds a WITH OIDS option to the copy command, which allows
dumping and loading of oids.
If a copy command tried to load in an oid that is greater than
its current system max oid, the system max oid is incremented. No
checking is done to see if other backends are running and have cached
oids.
pg_dump as its first step when using the -o (oid) option, will
copy in a dummy row to set the system max oid value so as rows are
loaded in, they are certain to be lower than the system oid.
pg_dump now creates indexes at the end to speed loading
Submitted by: Bruce Momjian <maillist@candle.pha.pa.us>
This presumably corrects a problem of initdb failing on systems that have
an awk that is sensitive to this.
--
Bryan Henderson Phone 408-227-6803
San Jose, California
When you try to do any UPDATE of the catalog class pg_class, such as
to change ownership of a class, the backend crashes.
This is really two serial bugs: 1) there is a hardcoded copy of the
schema of pg_class in the postgres program, and it doesn't match the
actual class that initdb creates in the database; 2) Parts of postgres
determine whether to pass an attribute value by value or by reference
based on the attbyval attribute of the attribute in class
pg_attribute. Other parts of postgres have it hardcoded. For the
relacl[] attribute in class pg_class, attbyval does not match the
hardcoded expectation.
The fix is to correct the hardcoded schema for pg_attribute and to
change the fetchatt macro so it ignores attbyval for all variable
length attributes. The fix also adds a bunch of logic documentation and
extends genbki.sh so it allows source files to contain such documentation.
--
Bryan Henderson Phone 408-227-6803
San Jose, California
---
below my signature, there are a coupls of diffs and files in a shell
archive, which were needed to build postgres95 1.02 on Siemens Nixdorfs
MIPS based SINIX systems. Except for the compiler switches "-W0" and
"-LD-Blargedynsym" these diffs should also apply for other SVR4 based
systems. The changes in "Makefile.global" and "genbki.sh" can probably
be ignored (I needed gawk, to make the script run).
There is one bugfix thou. In "src/backend/parser/sysfunc.c" the
function in this file didn't honor the EUROPEAN_DATES ifdef.
---
Submitted by: Frank Ridderbusch <ridderbusch.pad@sni.de>
Here's a couple more small fixes that I've made to make my runtime
checker happy with the code. More along the lines of those that
I sent in the past, ie, a pointer to an array != the name of
an array. The last patch is that I mailed about yesterday -- I got
two replies of "do it", so it's done. As far as I can tell, however,
the function in question is never called by pg95, so either way
it can't hurt...
From: "Kurt J. Lidl" <lidl@va.pubnix.com>
|
|This patch fixes a backend crash that happens sometimes when you try to
|join on a field that contains NULL in some rows. Postgres tries to
|compute a hash value of the field you're joining on, but when the field
|is NULL, the pointer it thinks is pointing to the data is really just
|pointing to random memory. This forces the hash value of NULL to be 0.
|
|It seems that nothing matches NULL on joins, even other NULL's (with or
|without this patch). Is that what's supposed to happen?
|
CLUSTER command couldn't rename correctly the new created heap relation.
The table base name resulted in some "temp_XXXX" instead of the correct
base name.
Submitted by: Dirk Koeser <koeser@informatik.uni-rostock.de>
Postgres is not able to cluster a relation on which an rtree index is
defined. Postmaster gives the following error message:
Too Large Allocation Request("!(0 < (size) && (size) <= (0xfffffff)):size=0
[0x0]", File:"/export/home/postgres/src/backend/utils/mmgr/mcxt.c", Line: 220)
!(0 <(size) && (size) <= (0xfffffff)) (0) [No such file or directory]
Submitted by: Dirk Koeser <koeser@informatik.uni-rostock.de>
pg_dump and load to 2.0. I haven't gotten any feedback on whether
people want it, so I am submitting it for others to decide. I would
recommend an install in 1.02.1.
I had said that the 2.0 pg_dump could dump a 1.02.1 database, but I was
wrong. The copy is actually performed by the backend, and the 2.0
database will not be able to read 1.02.1 databases because of the new
system columns.
This patch does several things. It copies nulls out as \N, so they can
be distinguished from '' strings. It fixes a problem where backslashes
in the input stream were not output as double-backslashes. Without this
patch, backslashes copied out were deleted upon input, or interpreted as
special characters. Third, input is now terminated by backslash-period.
This can not be part of a normal input stream.
I tested this by creating a database with all sorts of nulls, backslash,
and period fields and dumped the database and reloaded into a new
database and compared them.
Submitted by: Bruce
and found out that one of the patches is a show stopper for
compiling under a strict ansi package.
Please make sure the following fix makes it into the 1.02.1
release...
Thanks.
-Kurt
directory. The code that looks for the pg_hba file doesn't use it, though,
so the postmaster uses the wrong pg_hba file. Also, when the postmaster
looks in one directory and the user thinks it is looking in another
directory, the error messages don't give enough information to solve the
problem. I extended the error message for this.
Submitted by: Bryan Henderson <bryanh@giraffe.netgate.net>
Here's a small patch that my run-time checker whines about
incessantly. The justification for the patch is along the
lines of passing a NULL is allowed if you have an
arguement that is a *POINTER* to something, but if
the arguement is an array reference, it's not really
a "pointer", so it can't be NULL.
If you question this, I refer you to
<URL:http://www.va.pubnix.com/staff/djm/lore/arrays-are-not-pointers>
Anyways, here's the patch:
-Kurt
Submitted by: "Kurt J. Lidl" <lidl@va.pubnix.com>
This patch forces postgres95 to assume any floating-point value is a
float8. It removes the requirement that you cast all floating-point
constants to float8.
We can remove alot of casts in the regression test after we are sure
this works.
If I have missed anything, would someone let me know. I have tested
inserts of floating-point values into float8 fields, and it worked well.
Casting the number to float4 showed the same precision loss as previous
uncast values showed.
Submitted by: Bruce Momjian <maillist@candle.pha.pa.us>
There is a support routine in the standard 4.4BSD C library
called "err()". There is also a utility routine in
.../src/backend/bootstrap/bootstrap.c
with the same name.
Here's a patch that renames the pg95 routine to something a little
more sane. As a bonus, one more bit of system-specific code leaves
the system...
Submitted by: "Kurt J. Lidl" <lidl@va.pubnix.com>
I've enclosed two patches. The first affects Solaris compilability. The
bug stems from netdb.h (where MAXHOSTNAMELEN is defined on a stock
system). If the user has installed the header files from BIND 4.9.x,
there will be no definition of MAXHOSTNAMELEN. The patch will, if all
else fails, try to include <arpa/nameser.h> and set MAXHOSTNAMELEN to
MAXDNAME, which is 256 (just like MAXHOSTNAMELEN on a stock system).
The second patch adds aliases for "ISNULL" to "IS NULL" and likewise for
"NOTNULL" to "IS NOT NULL". I have not removed the postgres specific
ISNULL and NOTNULL. I noticed this on the TODO list, and figured it would
be easy to remove.
The full semantics are:
[ expression IS NULL ]
[ expression IS NOT NULL ]
--Jason
Submitted by: Jason Wright <jason@oozoo.vnet.net>
Previously Postgres95 wouldn't accept 'order by' clauses with fields
referred to as '<table>.<field>', e.g.:
select t1.field1, t2.field2 from table1 t1, table2 t2
order by t2.field2;
This syntax is required by the ODBC SQL spec.
Submitted by: Dan McGuirk <mcguirk@indirect.com>
While a normal SELECT statement can contain a GROUP BY clause, a cursor
declaration cannot. This was not the case in PG-1.0. Was there a good
reason why this was changed? Are cursors being phased out? Is there any way
to get data with just a SELECT (and without a DECLARE CURSOR ...)?
The patch below seems to fix things. If anyone can see a problem with it,
please let me know. Thanks.
Submitted by: David Smith <dasmith@perseus.tufts.edu>
Someone asked me if the bpchar type could be extended to do
case-insensitive regular expression searches.
Submitted by: "Alistair G. Crooks" <azcb0@juts.ccc.amdahl.com>
Originally, I thought the problem was caused by a function that gets
called as a normal function where we want to return a value, and as a
signal handler where we need to have it accept a parameter (the signal
number) and it returns nothing, I was going to case the function name in
the signal call as (void (*)(int)).
Looking at all the source, it turns out this function only gets used as
a signal handler, so I set an int parameter and return void.
I have removed the Linux defines because they are not needed. BSD let
this sloppiness slide. Linux gave a compile error.
Submitted by: Bruce Momjian <maillist@candle.pha.pa.us>
In postgres95/src/backend/nodes/readfuncs, lines 1188 and 1189,
local_node->relname is taken to point to a NameType, while its
defined as a pointer to char. Both the casting to Name and the
call of namestrcpy should, IMHO, be changed appropriately (first
patch).
As far as I could see from the Linux signal header file,
a signal handler is declared as
typedef void (*__sighandler_t)(int);
Few changes to postgres95/src/backend/storage/lmgr/proc.c seem
appropriate to comply with this.
Finally, postgres95/src/bin/pg_version/pg_version.c defines
a function GetDataHome (by default, returning an integer)
and returns NULL in the function, which isn't an integer...
Submitted by: ernst.molitor@uni-bonn.de
> INDEXED searches in some cases DO NOT WORK.
> Although simple search expressions (i.e. with a constant value on
> the right side of an operator) work, performing a join (by putting
> a field of some other table on the right side of an operator) produces
> empty output.
> WITHOUT indices, everything works fine.
>
submitted by: "Vadim B. Mikheev" <root@ais.sable.krasnoyarsk.su>
- src/backend/tcop/*
- cosmetic changes to OPENLINK patches
- src/backend/storage/*
- more changes, mostly cosmetic
- src/backend/ports/*
- merge in patches for aix and i386_solaris
The updating of array fields is broken in Postgres95-1.01, An array can
be only replaced with a new array but not have some elements modified.
This is caused by two bugs in the parser and in the array utilities.
Furthermore it is not possible to update array with a base type of
variable length.
- submitted by: Massimo Dal Zotto <dz@cs.unitn.it>
I have written some patches which add support for NULLs to Postgres95.
In fact support for NULLs was already present in postgres, but it had been
disabled because not completely debugged, I believe. My patches simply add
some checks here and there. To enable the new code you must add -DNULL_PATCH
to CFLAGS in Makefile.global. After recompiling you can do things like:
insert into a (x, y) values (1, NULL);
update a set x = NULL where x = 0;
You can't still use a "where x=NULL" clause, you must use ISNULL instead.
This could probably be an easy fix to do.
Submitted by: Massimo Dal Zotto <dz@cs.unitn.it>
Select queries with an isnull or notnull clause, like "select * where
somefield isnull", crash the backend if the table has at least one index.
If the indices are deleted the queries work again. Also the explain
command fail in the same way.
The is caused by a bug in subroutine of the optimizer which doesn't check
null values in the clauses.
Submitted by: Massimo Dal Zotto <dz@cs.unitn.it>
This is a patch to prevent an endless loop occuring in the Postgres backend
when a 'warning' error condition generates another warning error contition
in the handler code.
Submitted by: Chris Dunlop, <chris@onthe.net.au>
It is not possible to define attributes as arrays of date or time, the
type _time and _date are not defined.
Submitted by: Massimo Dal Zotto <dz@cs.unitn.it>
The type _char16 (array of char16) is incorrectly defined as array of name
and values longer than 16 chars are stored as names and not truncated to 16
bytes as they should be.
Submitted by: Massimo Dal Zotto <dz@cs.unitn.it>
varchar.diff
------------
This patch was necessary for the OpenLink Postgres Database Agent.
I think this fixes a bug anyway.
The following query demonstrates this bug:
create table foo (bar varchar);
insert into foo values (''); -- no problem
select * from foo where bar = ''; -- fails
causes segmentation fault.
Thanks to: Salvador Ortiz Garcia, Robert Patrick, Paul 'Shag' Walmsley,
and James Cooper for finding and fixing the problem.