be lurking in the install target directory. But don't zap up-to-date
headers (so install-all-headers before regular install will work).
Per suggestion from Larry Rosenman.
use the ANSI varargs style (<stdarg.h>) not the old style. Tatsuo had
reported this change was necessary back in the 7.0 beta cycle (4/13/00)
but for some reason, making the edit never got done.
waste of cycles on single-CPU machines, and of dubious utility on multi-CPU
machines too.
Tweak s_lock_stuck so that caller can specify timeout interval, and
increase interval before declaring stuck spinlock for buffer locks and XLOG
locks.
On systems that have fdatasync(), use that rather than fsync() to sync WAL
log writes. Ensure that WAL file is entirely allocated during XLogFileInit.
1. If there is exactly one pg_operator entry of the right name and oprkind,
oper() and related routines would return that entry whether its input type
had anything to do with the request or not. This is just premature
optimization: we shouldn't return the single candidate until after we verify
that it really is a valid candidate, ie, is at least coercion-compatible
with the given types.
2. oper() and related routines only promise a coercion-compatible result.
Unfortunately, there were quite a few callers that assumed the returned
operator is binary-compatible with the given datatype; they would proceed
to call it without making any datatype coercions. These callers include
sorting, grouping, aggregation, and VACUUM ANALYZE. In general I think
it is appropriate for these callers to require an exact or binary-compatible
match, so I've added a new routine compatible_oper() that only succeeds if
it can find an operator that doesn't require any run-time conversions.
Callers now call oper() or compatible_oper() depending on whether they are
prepared to deal with type conversion or not.
The upshot of these bugs is revealed by the following silliness in PL/Tcl's
selftest: it creates an operator @< on int4, and then tries to use it to
sort a char(N) column. The system would let it do that :-( (and evidently
has done so since 6.3 :-( :-(). The result in this case was just a silly
sort order, but the reverse combination would've provoked coredump from
trying to dereference integers. With this fix you get more reasonable
behavior:
pltcl_test=# select * from T_pkey1 order by key1, key2 using @<;
ERROR: Unable to identify an operator '@<' for types 'bpchar' and 'bpchar'
You will have to retype this query using an explicit cast
compressed storage works perfectly well. Might as well have a coherent
strategy for applying it, rather than the haphazard store-what-you-get
approach that was in the code before. The strategy I've set up here is
to attempt compression of any compressible index value exceeding
BLCKSZ/16, or about 500 bytes by default.
clause with an alias is a <subquery> and therefore hides table references
appearing within it, according to the spec. This is the same as the
preliminary patch I posted to pgsql-patches yesterday, plus some really
grotty code in ruleutils.c to reverse-list a query tree with the correct
alias name depending on context. I'd rather not have done that, but unless
we want to force another initdb for 7.1, there's no other way for now.
as previously discussed.
It makes AIX and IRIX not use DST for dates before 1970.
The following expected files need to be removed from the regression tests,
they contain wrong results and are not needed any more.
src/test/regress/expected/horology-1947-PDT.out
src/test/regress/expected/tinterval-1947-PDT.out
src/test/regress/expected/abstime-1947-PDT.out
Zeugswetter Andreas
definitions from K&R to ANSI C style, and fix broken assumption that
int and long are the same datatype. This repairs problems observed
on Alpha with regexps having between 32 and 63 states.
two transactions create the same table name concurrently, the one that
fails will complain about unique index pg_class_relname_index, rather than
about pg_type_typname_index which'll confuse most people. Free side
benefit: pg_class.reltype is correctly linked to the pg_type entry now.
It's been zero in all but the preloaded pg_class entries since who knows
when.
are now separate files "postgres.h" and "postgres_fe.h", which are meant
to be the primary include files for backend .c files and frontend .c files
respectively. By default, only include files meant for frontend use are
installed into the installation include directory. There is a new make
target 'make install-all-headers' that adds the whole content of the
src/include tree to the installed fileset, for use by people who want to
develop server-side code without keeping the complete source tree on hand.
Cleaned up a whole lot of crufty and inconsistent header inclusions.
elog(ERROR) not an Assert trap, since we've downgraded out-of-memory to
elog(ERROR) not a fatal error. Also, change the hard boundary from 256Mb
to 1Gb, just so that anyone who's actually got that much memory to spare
can play with TOAST objects approaching a gigabyte.
allocated by plan nodes are not leaked at end of query. This doesn't
really matter for normal queries, but it sure does for queries invoked
repetitively inside SQL functions. Clean up some other grotty code
associated with tupdescs, and fix a few other memory leaks exposed by
tests with simple SQL functions.
and two 'win32.mak'. Addresses the following:
1) Oops. Spelled fcntl.h wrong in the last one. D'uh.
2) PG_VERSION changed to be defined with " around it. psql/command.c failed
to compile without that.
3) Changed makefiles to use "/MD" and link both psql and libpq.dll against
MSVCRT.DLL instead of a static library. This takes care of the
crash-upon-free in psql.
I *think* this is what is on the "Open 7.1 Items" list as "Magnus Hagander
ODBC Issues?". It has nothing to do with ODBC, but it's the only issue I've
been involved with...
Magnus Hagander
actually) to ensure that its file access time doesn't get old enough to
tempt a /tmp directory cleaner to remove it. Still another reason we
should never have put the sockets in /tmp in the first place ...
and psql) again. Changes are:
1) psql requires the includes of "io.h" and "fcntl.h" in command.c in order
to make a call to open() work (io.h for _open(), fcntl.h for the O_xxx)
2) PG_VERSION is no longer defined in version.h[.in], but in configure.in.
Since we don't do configure on native win32, we need to put it in
config.h.win32 :-(
3) Added define of SYSCONFDIR to config.h.win32 - libpq won't compile
without it. This functionality is *NOT* tested - it's just defined as "" for
now. May work, may not.
4) DEF_PGPORT renamed to DEF_PGPORT_STR
I have done the "basic tests" on it - it connects to a database, and I can
run queries. Haven't tested any of the fancier functions (yet).
However, I stepped on a much bigger problem when fixing psql to work. It no
longer works when linked against the .DLL version of libpq (which the
Makefile does for it). I have left it linked against this version anyway,
pending the comments I get on this mail :-)
The problem is that there are strings being allocated from libpq.dll using
PQExpBuffers (for example, initPQExpBuffer() on line 92 of input.c). These
are being allocated using the malloc function used by libpq.dll. This
function *may* be different from the malloc function used by psql.exe - only
the resulting pointer must be valid. And with the default linking methods,
it *WILL* be different. Later, psql.exe tries to free() this string, at
which point it crashes because the free() function can't find the allocated
block (it's on the allocated blocks list used by the runtime lib of
libpq.dll).
Shouldn't the right thing to do be to have psql call termPQExpBuffer() on
the data instead? As it is now, gets_fromFile() will just return the pointer
received from the PQExpBuffer.data (this may well be present at several
places - this is the one I was bitten by so far). Isn't that kind of
"accessing the internals of the PQExpBuffer structure" wrong? Instead,
perhaps it shuold make a copy of the string, adn then termPQExpBuffer() it?
In that case, the string will have been allocated from within the same
library as the free() is called.
I can get it to work just fine by doing this - changing from (around line
100 of input.c):
and the same a bit further down in the same function.
But, as I said above, this may be at more places in the code? Perhaps
someone more familiar to it could comment on that?
What do you think shuld be done about this? Personally, I go by the "If you
allocate a piece of memory using an interface, use the same interface to
free it", but the question is how to make it work :-)
Also, AFAIK this only affects psql.exe, so the changes made to the libpq
this patch are required no matter how the other issue is handled.
Regards,
Magnus
bothering to check the return value --- which meant that in case the
update or delete failed because of a concurrent update, you'd not find
out about it, except by observing later that the transaction produced
the wrong outcome. There are now subroutines simple_heap_update and
simple_heap_delete that should be used anyplace that you're not prepared
to do the full nine yards of coping with concurrent updates. In
practice, that seems to mean absolutely everywhere but the executor,
because *noplace* else was checking.
eliminates a raft of portability issues, including whether sys_nerr
exists, whether the platform has any valid negative errnos, etc. The
downside is minimal: errno shouldn't ever contain an invalid value anyway,
and if it does, reasonably modern versions of strerror will not choke.
This rangecheck idea seemed good at the time, but it's clearly a net loss,
and I apologize to all concerned for having ever put it in.
rewrite of deadlock checking. Lock holder objects are now reachable from
the associated LOCK as well as from the owning PROC. This makes it
practical to find all the processes holding a lock, as well as all those
waiting on the lock. Also, clean up some of the grottier aspects of the
SHMQueue API, and cause the waitProcs list to be stored in the intuitive
direction instead of the nonintuitive one. (Bet you didn't know that
the code followed the 'prev' link to get to the next waiting process,
instead of the 'next' link. It doesn't do that anymore.)
of c.h altogether, and putting it into the only places that use it
(elog.c and exc.c), instead. Modify these routines to check for a
NULL or empty-string return from strerror, too, since some platforms
define strerror to return empty string for unknown errors (what a useless
definition that is ...). Clean up some cruft in ExcPrint while at it.
whitespace is unimportant in assembly code. Also, move VAX definition
of typedef slock_t to port header files to be like all the other ports.
Note that netbsd.h and openbsd.h are now identical, and I rather think
that freebsd.h is broken in the places where it doesn't agree --- but
I'll leave it to the freebsders to look at that.
* doc/FAQ_MSWIN: Update to be consistent with software -- mainly change
comment from lack of Cygwin UNIX domain socket support and to list of
current Cygwin UNIX domain socket issues.
* src/include/config.h.in: Enable UNIX domain sockets for Cygwin.
* src/include/port/win.h: Disable UNIX domain sockets for Cygwin b20.1.
* src/test/regress/pg_regress.sh: Use UNIX domain sockets for Cygwin
instead of TCP/IP.
mixed-signs. Previous effort left way too many minus signs, and was at
least as broken as the one before that :(
Clean up "ISO-style" time interval representation to omit zero fields if
there is at least one non-zero field. Supress some leading plus signs
when not necessary for clarity.
Replace every #ifdef __CYGWIN__ block with a cleaner TIMEZONE_GLOBAL macro
defined in datetime.h.
GetRawDatabaseInfo() won't cope with a compressed path spec (much less
a moved-off one). I'm not going to force an initdb for this change,
because it's noncritical --- we're not actually using datpath at all
right now. But it seems a good idea to apply the fix while I'm thinking
about it.
are treated more like 'cancel' interrupts: the signal handler sets a
flag that is examined at well-defined spots, rather than trying to cope
with an interrupt that might happen anywhere. See pghackers discussion
of 1/12/01.
are now critical sections, so as to ensure die() won't interrupt us while
we are munging shared-memory data structures. Avoid insecure intermediate
states in some code that proc_exit will call, like palloc/pfree. Rename
START/END_CRIT_CODE to START/END_CRIT_SECTION, since that seems to be
what people tend to call them anyway, and make them be called with () like
a function call, in hopes of not confusing pg_indent.
I doubt that this is sufficient to make SIGTERM safe anywhere; there's
just too much code that could get invoked during proc_exit().
entry:
----------------------------
revision 1.2
date: 2000/12/04 01:20:38; author: tgl; state: Exp; lines:
+18 -18
Eliminate some of the more blatant platform-dependencies ... it
builds here now, anyway ...
----------------------------
Which basically changes u_int*_t -> uint*_t, so now it does not
compile neither under Debian 2.2 nor under NetBSD 1.5 which
is platform independent<B8> all right. Also it replaces $KAME$
with $Id$ which is Bad Thing. PostgreSQL Id should be added as a
separate line so the file history could be seen.
So here is patch:
* changes uint*_t -> uint*. I guess that was the original
intention
* adds uint64 type to include/c.h because its needed
[somebody should check if I did it right]
* adds back KAME Id, because KAME is the master repository
* removes stupid c++ comments in pgcrypto.c
* removes <sys/types.h> from the code, its not needed
--
marko
Marko Kreen
as both a GROUP BY item and an output expression, the top-level Group
node should just copy up the evaluated expression value from its input,
rather than re-evaluating the expression. Aside from any performance
benefit this might offer, this avoids a crash when there is a sub-SELECT
in said expression.
and burn. Just for added luck, change reading of CONST nodes so that
we do not need to consult pg_type rows while reading them; this means
that no database access occurs during stringToNode. This requires
changing the order in which const-node fields are written, which means
an initdb is forced.
and revert documentation to describe the existing INHERITS clause
instead, per recent discussion in pghackers. Also fix implementation
of SQL_inheritance SET variable: it is not cool to look at this var
during the initial parsing phase, only during parse_analyze(). See
recent bug report concerning misinterpretation of date constants just
after a SET TIMEZONE command. gram.y really has to be an invariant
transformation of the query string to a raw parsetree; anything that
can vary with time must be done during parse analysis.
starting a new hashtable search no longer clobbers any other search
active anywhere in the system. Fix RelationCacheInvalidate() so that
it will not crash or go into an infinite loop if invoked recursively,
as for example by a second SI Reset message arriving while we are still
processing a prior one.
for Alpha gcc case. For Alpha non-gcc case, replace use of
__INTERLOCKED_TESTBITSS_QUAD builtin with __LOCK_LONG_RETRY and
__UNLOCK_LONG. The former does not execute an MB instruction and
therefore was guaranteed not to work on multiprocessor machines.
The LOCK_LONG builtins produce code that is the same in all essential
details as the gcc assembler code.
assume that TAS() will always succeed the first time, even if the lock
is known to be free. Also, make sure that code will eventually time out
and report a stuck spinlock, rather than looping forever. Small cleanups
in s_lock.h, too.
1. Distinguish cases where a Datum representing a tuple datatype is an OID
from cases where it is a pointer to TupleTableSlot, and make sure we use
the right typlen in each case.
2. Make fetchatt() and related code support 8-byte by-value datatypes on
machines where Datum is 8 bytes. Centralize knowledge of the available
by-value datatype sizes in two macros in tupmacs.h, so that this will be
easier if we ever have to do it again.
table that inherits from a temp table. Make sure the right things happen
if one creates a temp table, creates another temp that inherits from it,
then renames the first one. (Previously, system would end up trying to
delete the temp tables in the wrong order.)
recommendation from Paul Vixie. Add a new abbrev() function to produce
abbreviated format as text. No forced initdb, but new function is not
available unless you do an initdb or add the pg_proc row manually.
level" locks. A session lock is not released at transaction commit (but it
is released on transaction abort, to ensure recovery after an elog(ERROR)).
In VACUUM, use a session lock to protect the master table while vacuuming a
TOAST table, so that the TOAST table can be done in an independent
transaction.
I also took this opportunity to do some cleanup and renaming in the lock
code. The previously noted bug in ProcLockWakeup, that it couldn't wake up
any waiters beyond the first non-wakeable waiter, is now fixed. Also found
a previously unknown bug of the same kind (failure to scan all members of
a lock queue in some cases) in DeadLockCheck. This might have led to failure
to detect a deadlock condition, resulting in indefinite waits, but it's
difficult to characterize the conditions required to trigger a failure.
>> xlog.c : special case for beos to avoid 'link' which does not work yet
>> beos/sem.c : implementation of new sem_ctl call (GETPID) and a new
>sem_op
>> flag (IPCNOWAIT)
>> dynloader/beos.c : add a verification of symbol validity (seem that
the
>> loader sometime return OK with an invalid symbol)
>> postmaster.c : add beos forking support for the new checkpoint
process
>> postgres.c : remove beos special case for getrusage
>> beos.h : Correction of a bas definition of AF_UNIX, misc defnitions
>>
>>
>> thanks
>>
>>
>> cyril
Cyril VELTER
to ensure that we have released buffer refcounts and so forth, rather than
putting ad-hoc operations before (some of the calls to) proc_exit. Add
commentary to discourage future hackers from repeating that mistake.
comparison does not consider paths different when they differ only in
uninteresting aspects of sort order. (We had a special case of this
consideration for indexscans already, but generalize it to apply to
ordered join paths too.) Be stricter about what is a canonical pathkey
to allow faster pathkey comparison. Cache canonical pathkeys and
dispersion stats for left and right sides of a RestrictInfo's clause,
to avoid repeated computation. Total speedup will depend on number of
tables in a query, but I see about 4x speedup of planning phase for
a sample seven-table query.
avoid repeated evaluations in cost_qual_eval(). This turns out to save
a useful fraction of planning time. No change to external representation
of RestrictInfo --- although that node type doesn't appear in stored
rules anyway.
varlena type. (I did not force initdb, but you won't see the fix
unless you do one.) Also, make sure all index support operators and
functions are careful not to leak memory for toasted inputs; I had
missed some hash and rtree support ops on this point before.
As I read it, the spec requires a non-null result in some cases where
one of the inputs is NULL: specifically, if the other endpoint of that
interval is between the endpoints of the other interval, then the result
is known TRUE despite the missing endpoint. The spec could've been a
lot simpler if they did not intend this behavior.
I did not force an initdb for this change, but if you don't do one you'll
still see the old strict-function behavior.
work where we can (given that the executor only handles it at top level)
and generate an error where we can't. Note that while the parser has
been allowing views to say SELECT FOR UPDATE for a few weeks now, that
hasn't actually worked until just now.
report from Joel Burton. Turns out that my simple idea of turning the
SELECT into a subquery does not interact well *at all* with the way the
rule rewriter works. Really what we need to make INSERT ... SELECT work
cleanly is to decouple targetlists from rangetables: an INSERT ... SELECT
wants to have two levels of targetlist but only one rangetable. No time
for that for 7.1, however, so I've inserted some ugly hacks to make the
rewriter know explicitly about the structure of INSERT ... SELECT queries.
Ugh :-(
Allow some operator-like tokens to be used as function names.
Flesh out support for time, timetz, and interval operators
and interactions.
Regression tests pass, but non-reference-platform horology test results
will need to be updated.
anymore. That won't teach us anything new for the rest of this release
cycle, so it seems better to keep the --assert environment more like the
non-assert environment for beta.
I'm going to leave CLOBBER_FREED_MEMORY and MEMORY_CONTEXT_CHECKING
turned on by --enable-cassert for now, however.
not-very-good handling of mid-size allocation requests. Do everything via
either the "small" case (chunk size rounded up to power of 2) or the "large"
case (pass it straight off to malloc()). Increase the number of freelists
a little to set the breakpoint between these behaviors at 8K.
by without them.
Don't check for preprocessor symbols from system header files in port
include files, since those header files aren't included at this point.
both MULTIBYTE and TOAST prevent char(n) from being truly fixed-size.
Simplify and speed up fastgetattr() and index_getattr() macros by
eliminating special cases for attnum=1. It's just as fast to handle
the first attribute by presetting its attcacheoff to zero; so do that
instead when loading the tupledesc in relcache.c.
included by everything that includes bufmgr.h --- it's supposed to be
internals, after all, not part of the API! This fixes the conflict
against FreeBSD headers reported by Rosenman, by making it unnecessary
for s_lock.h to be included by plperl.c.
socket file, in favor of having an ordinary lockfile beside the socket file.
Clean up a few robustness problems in the lockfile code. If postmaster is
going to reject a connection request based on database state, it will now
tell you so before authentication exchange not after. (Of course, a failure
after is still possible if conditions change meanwhile, but this makes life
easier for a yet-to-be-written pg_ping utility.)
IPC key assignment will now work correctly even when multiple postmasters
are using same logical port number (which is possible given -k switch).
There is only one shared-mem segment per postmaster now, not 3.
Rip out broken code for non-TAS case in bufmgr and xlog, substitute a
complete S_LOCK emulation using semaphores in spin.c. TAS and non-TAS
logic is now exactly the same.
When deadlock is detected, "Deadlock detected" is now the elog(ERROR)
message, rather than a NOTICE that comes out before an unhelpful ERROR.
for any other purpose than PGLC_localeconv()'s internal save/restore of
locale settings. Fix cash.c to call PGLC_localeconv() rather than
making a direct call to localeconv() --- the old way, if PGLC_localeconv()
had already cached a locale result, it would be overwritten by the first
cash_in or cash_out operation, leading to wrong-locale results later.
Probably no demonstrable bug today, since we only appear to be looking
at the LC_MONETARY results which should be the same anyway, but definitely
a gotcha waiting to strike.
re-adopt these settings at every postmaster or standalone-backend startup.
This should fix problems with indexes becoming corrupt due to failure to
provide consistent locale environment for postmaster at all times. Also,
refuse to start up a non-locale-enabled compilation in a database originally
initdb'd with a non-C locale. Suppress LIKE index optimization if locale
is not "C" or "POSIX" (are there any other locales where it's safe?).
Issue NOTICE during initdb if selected locale disables LIKE optimization.
it fixing Y,YY,YYY,YYYY conversion, the docs and regress tests update
are included too.
During the patch testing I found small bug in miscadmin.h in
convertstr() declaration. Here it's fixed too.
Thanks
Karel
rather than just being aliases for int4in/int4out. Give type Oid a
full set of comparison operators that do proper unsigned comparison,
instead of reusing the int4 comparators. Since pg_dump is now doing
unsigned comparisons of OIDs, it is now *necessary* that we play by
the rules here. In fact, given that btoidcmp() has been doing unsigned
comparison for quite some time, it seems likely that we have index-
corruption problems in 7.0 and before once the Oid counter goes past
2G. Fixing these operators is a necessary step before we can think
about 8-byte Oid, too.
in pghackers list. Support for oldstyle internal functions is gone
(no longer needed, since conversion is complete) and pg_language entry
'internal' now implies newstyle call convention. pg_language entry
'newC' is gone; both old and newstyle dynamically loaded C functions
are now called language 'C'. A newstyle function must be identified
by an associated info routine. See src/backend/utils/fmgr/README.
maintained for each cache entry. A cache entry will not be freed until
the matching ReleaseSysCache call has been executed. This eliminates
worries about cache entries getting dropped while still in use. See
my posting to pg-hackers of even date for more info.
Context diff this time.
Remove -m486 compile args for FreeBSD-i386, compile -O2 on i386.
Compile with only -O on alpha for codegen safety.
Make the port use the TEST_AND_SET for alpha and i386 on FreeBSD.
Fix a lot of bogus string formats for outputting pointers (cast to int
and %u/%x replaced with no cast and %p), and 'Size'(size_t) are now
cast to 'unsigned long' and output with %lu/
Remove an unused variable.
Alfred Perlstein
cloned, rather than always cloning template1. Modify initdb to generate
two identical databases rather than one, template0 and template1.
Connections to template0 are disallowed, so that it will always remain
in its virgin as-initdb'd state. pg_dumpall now dumps databases with
restore commands that say CREATE DATABASE foo WITH TEMPLATE = template0.
This allows proper behavior when there is user-added data in template1.
initdb forced!
hosting product, on both shared and dedicated machines. We currently
offer Oracle and MySQL, and it would be a nice middle-ground.
However, as shipped, PostgreSQL lacks the following features we need
that MySQL has:
1. The ability to listen only on a particular IP address. Each
hosting customer has their own IP address, on which all of their
servers (http, ftp, real media, etc.) run.
2. The ability to place the Unix-domain socket in a mode 700 directory.
This allows us to automatically create an empty database, with an
empty DBA password, for new or upgrading customers without having
to interactively set a DBA password and communicate it to (or from)
the customer. This in turn cuts down our install and upgrade times.
3. The ability to connect to the Unix-domain socket from within a
change-rooted environment. We run CGI programs chrooted to the
user's home directory, which is another reason why we need to be
able to specify where the Unix-domain socket is, instead of /tmp.
4. The ability to, if run as root, open a pid file in /var/run as
root, and then setuid to the desired user. (mysqld -u can almost
do this; I had to patch it, too).
The patch below fixes problem 1-3. I plan to address #4, also, but
haven't done so yet. These diffs are big enough that they should give
the PG development team something to think about in the meantime :-)
Also, I'm about to leave for 2 weeks' vacation, so I thought I'd get
out what I have, which works (for the problems it tackles), now.
With these changes, we can set up and run PostgreSQL with scripts the
same way we can with apache or proftpd or mysql.
In summary, this patch makes the following enhancements:
1. Adds an environment variable PGUNIXSOCKET, analogous to MYSQL_UNIX_PORT,
and command line options -k --unix-socket to the relevant programs.
2. Adds a -h option to postmaster to set the hostname or IP address to
listen on instead of the default INADDR_ANY.
3. Extends some library interfaces to support the above.
4. Fixes a few memory leaks in PQconnectdb().
The default behavior is unchanged from stock 7.0.2; if you don't use
any of these new features, they don't change the operation.
David J. MacKenzie
that search loops only have to scan that far and not through all maxBackends
entries. This eliminates a performance penalty for setting maxBackends
much higher than the average number of active backends. Also, eliminate
no-longer-used 'backend tag' concept. Remove setting of environment
variables at backend start (except for CYR_RECODE), since none of them
are being examined by the backend any longer.
joins, and clean things up a good deal at the same time. Append plan node
no longer hacks on rangetable at runtime --- instead, all child tables are
given their own RT entries during planning. Concept of multiple target
tables pushed up into execMain, replacing bug-prone implementation within
nodeAppend. Planner now supports generating Append plans for inheritance
sets either at the top of the plan (the old way) or at the bottom. Expanding
at the bottom is appropriate for tables used as sources, since they may
appear inside an outer join; but we must still expand at the top when the
target of an UPDATE or DELETE is an inheritance set, because we actually need
a different targetlist and junkfilter for each target table in that case.
Fortunately a target table can't be inside an outer join... Bizarre mutual
recursion between union_planner and prepunion.c is gone --- in fact,
union_planner doesn't really have much to do with union queries anymore,
so I renamed it grouping_planner.
functions, per recent discussions on pghackers. For now, I have called
the verbose-display formatting function text(), but will reconsider if
enough people object.
initdb forced.
message about recursive use of a syscache. Also remove most of the
specialized indexscan routines in indexing.c --- it turns out that
catcache.c is perfectly able to perform the indexscan for itself,
in fact has already looked up all the information needed to do so!
This should be faster as well as needing far less boilerplate code.
(WAL logging for this is not done yet, however.) Clean up a number of really
crufty things that are no longer needed now that DROP behaves nicely. Make
temp table mapper do the right things when drop or rename affecting a temp
table is rolled back. Also, remove "relation modified while in use" error
check, in favor of locking tables at first reference and holding that lock
throughout the statement.
included, and then include <strings.h> if so. Several systems already
needed <strings.h> anyway. Some new systems that claim to conform to the
Unix 9x "standard" do not declare str[n]casemp() in string.h, and C99
compilers will not like that.
Bruce Hartzler <bruceh@mail.utexas.edu>. It contains shared library
support, regression test map, and the usual template files. The dynamic
loader is missing, the spin lock code apparently doesn't assemble due to
syntax problems, and semaphores are to be hoped for from Apple.
position() and substring() functions, so that it works transparently for
bit types as well. Alias the text functions appropriately.
Add position() for bit types.
Add new constant node T_BitString that represents literals of the form
B'1001 and pass those to zpbit type.
code conversion between Unicode and other encodings. Note that
this option requires --enable-multibyte also.
The reason why this is optional is that the feature requires huge
mapping tables and I don't think every user need the feature.
equivalent.
In linux.h there were some #undef HAVE_INT_TIMEZONE, which are useless
because HAVE_TM_ZONE overrides it anyway, and messing with configure
results isn't cool.
ExecutorRun. This allows LIMIT to work in a view. Also, LIMIT in a
cursor declaration will behave in a reasonable fashion, whereas before
it was overridden by the FETCH count.
MULTIBYTE support is not compiled (you just can't set them to anything
but SQL_ASCII). This should reduce interoperability problems between
MB-enabled clients and non-MB-enabled servers.
as full as possible, seems better to use a tuple size around BLCKSZ/4
so that less space is wasted when a LO tuple is updated. Also, this
lets us use a logical page size that's an exact power of two, avoiding
partial-page writes when client is sending us stuff in power-of-2
buffer chunks.
kibitzing from Tom Lane. Large objects are now all stored in a single
system relation "pg_largeobject" --- no more xinv or xinx files, no more
relkind 'l'. This should offer substantial performance improvement for
large numbers of LOs, since there won't be directory bloat anymore.
It'll also fix problems like running out of locktable space when you
access thousands of LOs in one transaction.
Also clean up cruft in read/write routines. LOs with "holes" in them
(never-written byte ranges) now work just like Unix files with holes do:
a hole reads as zeroes but doesn't occupy storage space.
INITDB forced!
from bufmgr - it would be nice to have separate hash in smgr
for node <--> fd mappings, but for the moment it's easy to
add new hash to relcache.
Fixed small bug in xlog.c:ReadRecord.
as well allow DROP multiple INDEX, RULE, TYPE as well. Add missing
CommandCounterIncrement to DROP loop, which could cause trouble otherwise
with multiple DROP of items affecting same catalog entries. Try to
bring a little consistency to various error messages using 'does not exist',
'nonexistent', etc --- I standardized on 'does not exist' since that's
what the vast majority of the existing uses seem to be.
* Makefile: Add more standard targets. Improve shell redirection in GNU
make detection.
* src/backend/access/transam/rmgr.c: Fix incorrect(?) C.
* src/backend/libpq/pqcomm.c (StreamConnection): Work around accept() bug.
* src/include/port/unixware.h: ...with help from here.
* src/backend/nodes/print.c (plannode_type): Remove some "break"s after
"return"s.
* src/backend/tcop/dest.c (DestToFunction): ditto.
* src/backend/nodes/readfuncs.c: Add proper prototypes.
* src/backend/utils/adt/numutils.c (pg_atoi): Cope specially with strtol()
setting EINVAL. This saves us from creating an extra set of regression test
output for the affected systems.
* src/include/storage/s_lock.h (tas): Correct prototype.
* src/interfaces/libpq/fe-connect.c (parseServiceInfo): Don't use variable
as dimension in array definition.
* src/makefiles/Makefile.unixware: Add support for GCC.
* src/template/unixware: same here
* src/test/regress/expected/abstime-solaris-1947.out: Adjust whitespace.
* src/test/regress/expected/horology-solaris-1947.out: Part of this file
was evidently missing.
* src/test/regress/pg_regress.sh: Fix shell. mkdir -p returns non-zero if
the directory exists.
* src/test/regress/resultmap: Add entries for Unixware.
> Regression tests opr_sanity and sanity_check are now failing.
Um, Bruce, I've said several times that I didn't think Perchine's large
object changes should be applied until someone had actually reviewed
them.
Makefile.port, since they are of no use to configure and much of the
library magic happens in Makefile.port anyway.
Use __alpha, not __alpha__, since the former is universally available.
Remove -DNOFIXADE from the compile command line and put it in the port
include file.
I tested it restoring my database with > 100000 BLOBS, and dumping it out.
But unfortunatly I can not restore it back due to problems in pg_dump.
--
Sincerely Yours,
Denis Perchine
source directory. This involves mostly makefiles using $(srcdir) when they
might have used ".". (Regression tests don't work with this, yet.)
Sort out usage of CPPFLAGS, CFLAGS (and CXXFLAGS). Add "override" keyword
in most places, to preserve necessary flags even when the user overrode the
flags.
This patch forces the use of 'DROP VIEW' to destroy views.
It also changes the syntax of DROP VIEW to
DROP VIEW v1, v2, ...
to match the syntax of DROP TABLE.
Some error messages were changed so this patch also includes changes to the
appropriate expected/*.out files.
Doc changes for 'DROP TABLE" and 'DROP VIEW' are included.
--
Mark Hollomon
As a result, backend/libpq/pqcomm.c and interfaces/libpq/fe-connect.c
fail to compile.
The <netinet/tcp.h> header needs to be preceded by <netinet/in.h>, at
least on IRIX, Solaris and AIX. The simple configure test fails.
(That header on Linux is idempotent.)
The basic problem is that <netinet/tcp.h> is a BSD header. The
correct header for TCP internals such as TCP_NODELAY on a UNIX system
is <xti.h>. By UNIX I mean UNIX95 (aka XPG4v2 or SUSv1) or later.
The current UNIX standard (UNIX98 aka SUSv2) is available online at
<http://www.opengroup.org/onlinepubs/7908799/>.
The fix is to add header support for <xti.h> into configure.in and
config.h.in.
The 2 files which conditionally include <netinet/tcp.h> need also to
conditionally include <xti.h>.
Pete Forman
> > For a while I though it might be because we are using an alpha TAS in
> > the spinlock rather than the old semaphore. I replaced our spinlock
> > with the standard one and it made no difference. We have been running
> > with our spinlock implementation for nearly 2 months on a production
> > database now without a hitch, so I think it is ok. Did I ever submit
> > any patches for the Alpha spinlock?
>
> Not that I recall. We did get some advice from some Alpha gurus at DEC
> who seemed to think the existing TAS code is OK. What was it that you
> felt needed to be improved?
The current code uses semaphores, which has the advantage that it works
well even on multi-processor machines, but the disadvantage that it is not
the fastest way possible. Writing a spinlock on Alpha for SMP machines is
very difficult, as you need to deal with memory barriers. A real mess. But
then one of the people at Compaq pointed out to us that there is a
ready-made routine on Alpha. We implemented it with the two patches below.
I ran tests with lots of parallel back-ends and got around a 10% speed
increase. I include the two patches. Perhaps some of the other people
running Tru64 can have a look at these as well.
Cheers,
Adriaan Joubert
> this is patch v 0.4 to support transactions with BLOBs.
> All BLOBs are in one table. You need to make initdb.
>
> --
> Sincerely Yours,
> Denis Perchine
after that dynamic loading isn't working and shared memory handling is
broken.
Attached with this message, there is a Zip file which contain :
* beos.diff = patch file generated with difforig
* beos = folder with beos support files which need to be moved in /
src/backend/port
* expected = foler with three file for message and precision
difference in regression test
* regression.diff = rule problem (need to kill the backend manualy)
* dynloader = dynloader files (they are also in the pacth files,
but there is so much modification that I have join full files)
Everything works except a problem in 'rules' Is there some problems
with rules in the current tree ? It used to works with last week tree.
Cyril VELTER
took some rejiggering of typename and ACL parsing, as well as moving
parse_analyze call out of parser(). Restructure postgres.c processing
so that parse analysis and rewrite are skipped when in abort-transaction
state. Only COMMIT and ABORT statements will be processed beyond the raw
parser() phase. This addresses problem of parser failing with database access
errors while in aborted state (see pghackers discussions around 7/28/00).
Also fix some bugs with COMMIT/ABORT statements appearing in the middle of
a single query input string.
Function, operator, and aggregate arguments/results can now use full
TypeName production, in particular foo[] for array types.
DROP OPERATOR and COMMENT ON OPERATOR were broken for unary operators.
Allow CREATE AGGREGATE to accept unquoted numeric constants for initcond.
SQL92 semantics, including support for ALL option. All three can be used
in subqueries and views. DISTINCT and ORDER BY work now in views, too.
This rewrite fixes many problems with cross-datatype UNIONs and INSERT/SELECT
where the SELECT yields different datatypes than the INSERT needs. I did
that by making UNION subqueries and SELECT in INSERT be treated like
subselects-in-FROM, thereby allowing an extra level of targetlist where the
datatype conversions can be inserted safely.
INITDB NEEDED!
working on the VERY latest version of BeOS. I'm sure there will be
alot of comments, but then if there weren't I'd be disappointed!
Thanks for your continuing efforts to get this into your tree.
Haven't bothered with the new files as they haven't changed.
BTW Peter, the compiler is "broken" about the bool define and so on.
I'm filing a bug report to try and get it addressed. Hopefully then we
can tidy up the code a bit.
I await the replies with interest :)
David Reid
problems with some bits of it, but when all the patches are in it'll build
and we can fix it from there :) I've got a version that builds and runs and
that is the basis for these patches.
The first file has the new additional files that are required,
template/beos
backend/port/dynloader/beos.c
backend/port/dynloader/beos.h
include/port/beos.h
makefiles/Makefile.beos
The second is a tarball of diffs against a few files. I've added sys/ipc.h
to configure and config.h via configure.in and config.h.in and then started
adding the check as this file isn't needed on BeOS and having loads of
#ifdef BEOS isn't as obvious as #ifdef HAVE_SYS_IPC_H and isn't as
autconf'ish :)
Files touched are
include/c.h
configure.in
include/config.h.in
include/storage/ipc.h
include/utils/int8.h
Let me know how these go. I'll await a response before submitting any more.
Any problems just get in touch.
David Reid
and the fmgr redesign.
It makes the homebrewn dl*() functions for more recent Versions of AIX
obsolete
by using the system dl*() functions instead.
It also fixes the expected file for the horology regression test.
Please regenerate configure from configure.in, I don't have the
environment/time.
Andreas
(Don't forget that an alias is required.) Views reimplemented as expanding
to subselect-in-FROM. Grouping, aggregates, DISTINCT in views actually
work now (he says optimistically). No UNION support in subselects/views
yet, but I have some ideas about that. Rule-related permissions checking
moved out of rewriter and into executor.
INITDB REQUIRED!
Update the installation instructions (formerly misnamed "FAQ"), add configure
checks for some headers rather than having users copy stubs manually (ugh!).
Use Autoconf check for exe extension. This also avoids inheriting the value
of $(X) from the environment.
complaints about ungrouped variables. This is for consistency with
behavior elsewhere, notably the fact that the relname is reported as
an alias in these same complaints. Also, it'll work with subselect-
in-FROM where old code didn't.
- rename ichar() to chr() (discussed with Tom)
- add docs for oracle compatible routines:
btrim()
ascii()
chr()
repeat()
- fix bug with timezone in to_char()
- all to_char() variants return NULL instead textin("")
if it's needful.
The contrib/odbc is without changes and contains same routines as main
tree ... because I not sure how plans are Thomas with this :-)
Karel
---------------------------------------------------------------------------
This effectively one line patch should fix the fact that
foreign key definitions in create table were erroring if
a primary key was defined. I was using the columns
list to get the columns of the table for comparison, but
it got reused as a temporary list inside the primary key
stuff.
Stephan Szabo
query representation. Note that GEQO_RELS setting is now interpreted
as the number of top-level items in the FROM list, not necessarily the
number of relations in the query. This seems appropriate since we are
only doing join-path searching over the top-level items.
There is still no effective difference but it will kick in once setuid
functions exist (not included here). Make old getpgusername() alias for
current_user.
DESTDIR=/else/where' and prepends the value of DESTDIR to the full
installation paths (e.g., /else/where/usr/local/pgsql/bin). This allows
users to install the package into a location different from the one that
was configured and hard-coded into various scripts, e.g., for creating
binary packages.
DESTDIR is in many cases preferrable over `make install
prefix=/else/where' because
a) `prefix' affects the path that is hard-coded into the files, which can
lead to a `make install prefix=xxx' (as done by the regression test
driver) corrupting the files in the source tree with wrong paths.
b) it doesn't work at all if a directory was overridden to not depend on
`prefix', e.g., --sysconfdir=/etc.
(Updating the regression test driver to use DESTDIR is a separate
undertaking.)
See also autoconf@gnu.org, From: Akim Demaille <akim@epita.fr>, Date: 08
Sep 2000 12:48:59 +0200, Message-ID:
<mv4em2vb1lw.fsf@nostromo.lrde.epita.fr>, Subject: Re: HTML format
documentation.
for views. Views are now have a "relkind" of
RELKIND_VIEW instead of RELKIND_RELATION.
Also, views no longer have actual heap storage
files.
The following changes were made
1. CREATE VIEW sets the new relkind
2. The executor complains if a DELETE or
INSERT references a view.
3. DROP RULE complains if an attempt is made
to delete a view SELECT rule.
4. CREATE RULE "_RETmytable" AS ON SELECT TO mytable DO INSTEAD ...
1. checks to make sure mytable is empty.
2. sets the relkind to RELKIND_VIEW.
3. deletes the heap storage files.
5. LOCK myview is not allowed. :)
6. the regression test type_sanity was changed to
account for the new relkind value.
7. CREATE INDEX ON myview ... is not allowed.
8. VACUUM myview is not allowed.
VACUUM automatically skips views when do the entire
database.
9. TRUNCATE myview is not allowed.
THINGS LEFT TO THINK ABOUT
o pg_views
o pg_dump
o pgsql (\d \dv)
o Do we really want to be able to inherit from views?
o Is 'DROP TABLE myview' OK?
--
Mark Hollomon
user is now defined in terms of the user id, the user name is only computed
upon request (for display purposes). This is kind of the opposite of the
previous state, which would maintain the user name and compute the user id
for permission checks.
Besides perhaps saving a few cycles (integer vs string), this now creates a
single point of attack for changing the user id during a connection, for
purposes of "setuid" functions, etc.
quote_ident(text) returns text
quote_literal(text) returns text
These are handy to build up properly quoted query strings
for the new PL/pgSQL EXECUTE functionality to submit
dynamic DDL statements.
Jan
- full support for IW (ISO week) and vice versa conversion for IW too
(the to_char 'week' support is now complete and I hope correct).
Thomas, I use for IW code from timestamp.c, for this I create separate
function date2isoweek() from original 'case DTK_WEEK:' code in the
timestamp_part(). I mean will better use one code for same feature in
date_part() and in to_char(). The isoweek2date() is added to timestamp.c
too. Right?
IMHO in 7.1 will all to_char's features complete. It is cca 41 templates
for date/time and cca 21 for numbers.
* to_ascii:
- gcc, is it correct now? :-)
In the patch is documentation for to_char's IW and for to_ascii().
Karel
length is < TOAST_TUPLE_THRESHOLD, even with toastable column types
present. For example, CREATE TABLE foo (f1 int, f2 varchar(100))
does not require a toast table, even though varchar is a toastable
type.
pg_mb2wchar(const unsigned char *, pg_wchar *);
pg_mb2wchar_with_len(const unsigned char *, pg_wchar *, int);
from void to int. Now they return the number of
wide chars.
(rather than compile time). For libpq, even when Kerberos support is
compiled in, the default user name should still fall back to geteuid()
if it can't be determined via the Kerberos system.
A couple of fixes for string type configuration parameters, now that there
is one.
for example, an SQL function can be used in a functional index. (I make
no promises about speed, but it'll work ;-).) Clean up and simplify
handling of functions returning sets.