Per extensive discussion on pgsql-hackers. We are deliberately not
back-patching this even though the behavior of 8.3 and 8.4 is
unquestionably broken, for fear of breaking existing users of this
parameter. This incompatibility should be release-noted.
linking both executables and shared libraries, and we add on LDFLAGS_EX when
linking executables or LDFLAGS_SL when linking shared libraries. This
provides a significantly cleaner way of dealing with link-time switches than
the former behavior. Also, make sure that the various platform-specific
%.so: %.o rules incorporate LDFLAGS and LDFLAGS_SL; most of them missed that
before. (I did not add these variables for the platforms that invoke $(LD)
directly, however. It's not clear if we can do that safely, since for the
most part we assume these variables use CC command-line syntax.)
Per gripe from Aaron Swenson and subsequent investigation.
to have different values in different processes of the primary server.
Also put it into the "Streaming Replication" GUC category; it doesn't belong
in "Standby Servers" because you use it on the master not the standby.
In passing also correct guc.c's idea of wal_keep_segments' category.
max_standby_streaming_delay, and revise the implementation to avoid assuming
that timestamps found in WAL records can meaningfully be compared to clock
time on the standby server. Instead, the delay limits are compared to the
elapsed time since we last obtained a new WAL segment from archive or since
we were last "caught up" to WAL data arriving via streaming replication.
This avoids problems with clock skew between primary and standby, as well
as other corner cases that the original coding would misbehave in, such
as the primary server having significant idle time between transactions.
Per my complaint some time ago and considerable ensuing discussion.
Do some desultory editing on the hot standby documentation, too.
formats for geometric types. Per bug #5536 from Jon Strait, and my own
testing.
Back-patch to all supported branches, since this doco has been wrong right
along -- we certainly haven't changed the I/O behavior of these types in
many years.
The revised documentation makes it more clear that these are client-side
parameters, rather than server side parameters. It also puts the main
point of each parameter first, and consolidates the conditions under which
it might be ignored in a single list at the end.
This adds four additional connection parameters to libpq: keepalives,
keepalives_idle, keepalives_count, and keepalives_interval.
keepalives default to on, per discussion, but can be turned off by
specifying keepalives=0. The remaining parameters, where supported,
can be used to adjust how often keepalives are sent and how many
can be lost before the connection is broken.
The immediate motivation for this patch is to make sure that
walreceiver will eventually notice if the master reboots without
closing the connection cleanly, but it should be helpful in other
cases as well.
Tollef Fog Heen, Fujii Masao, and me.
In HEAD, emit a warning when an operator named => is defined.
In both HEAD and the backbranches (except in 8.2, where contrib
modules do not have documentation), document that hstore's text =>
text operator may be removed in a future release, and encourage the
use of the hstore(text, text) function instead. This function only
exists in HEAD (previously, it was called tconvert), so backpatch
it back to 8.2, when hstore was added. Per discussion.
dblink_build_sql_insert() and related functions. Now the column numbers
are treated as logical not physical column numbers. This will provide saner
behavior in the presence of dropped columns; furthermore, if we ever get
around to allowing rearrangement of logical column ordering, the original
definition would become nearly untenable from a usability standpoint.
Per recent discussion of dblink's handling of dropped columns.
Not back-patched for fear of breaking existing applications.
In particular, note that autovacuum does not yet understand that it might
need to vacuum inheritance parents as a result of changes to the child
tables.
description for vacuum_defer_cleanup_age to the correct category.
Sections in postgresql.conf are also sorted in the same order with docs.
Per gripe by Fujii Masao, suggestion by Heikki Linnakangas, and patch by me.
string for a streaming replication connection. It's ignored by the
server, but allows libpq to pick up the password from .pgpass where
"replication" is specified as the database name.
Patch by Fujii Masao per Tom's suggestion, with some wording changes by me.
pg_last_xlog_replay_location(). Per Robert Haas's suggestion, after
Itagaki Takahiro pointed out an issue in the docs. Also, some wording
changes in the docs by me.
to be initialized with proper values. Affected parameters are
fillfactor, analyze_threshold, and analyze_scale_factor.
Especially uninitialized fillfactor caused inefficient page usage
because we built a StdRdOptions struct in which fillfactor is zero
if any reloption is set for the toast table.
In addition, we disallow toast.autovacuum_analyze_threshold and
toast.autovacuum_analyze_scale_factor because we didn't actually
support them; they are always ignored.
Report by Rumko on pgsql-bugs on 12 May 2010.
Analysis by Tom Lane and Alvaro Herrera. Patch by me.
Backpatch to 8.4.
and current server clock time to SR data messages. These are not currently
used on the slave side but seem likely to be useful in future, and it'd be
better not to change the SR protocol after release. Per discussion.
Also do some minor code review and cleanup on walsender.c, and improve the
protocol documentation.
"val AS name" to "name := val", as per recent discussion.
This patch catches everything in the original named-parameters patch,
but I'm not certain that no other dependencies snuck in later (grepping
the source tree for all uses of AS soon proved unworkable).
In passing I note that we've dropped the ball at least once on keeping
ecpg's lexer (as opposed to parser) in sync with the backend. It would
be a good idea to go through all of pgc.l and see if it's in sync now.
I didn't attempt that at the moment.
table with foreign key constraints eats memory. Per off-line discussion of
bug #5480 with its reporter. Also do some minor wordsmithing elsewhere in
the same section.
move two paragraphs that apply to log shipping in general from the
"Alternative method for log shipping" section to the earlier sections.
Add varname tags where missing. Some small wording changes.
RELEASE SAVEPOINT to make an older savepoint with the same name
accessible. It's also possible to implicitly release the savepoint by
rolling back to an earlier savepoint, but mentioning that too would make
the note just more verbose and confusing.
This allows the index to reference the pg_notify() subsection specifically,
rather than Notes section of the NOTIFY reference page more generally.
Fujii Masao
This avoids a formatting problem in the PDF output. In the HTML output this
isn't necessary, but we've done similar things elsewhere in the documentation
so I think it's OK to do it here, too. I've refrained from breaking a longish
error message which also causes problems for the PDF output, because that would
make the HTML output look wrong.
Erik Rijkers
that is a regular table or view owned by a superuser. This prevents a
trojan horse attack whereby any unprivileged SQL user could create such a
table and insert code into it that would then get executed in other users'
sessions whenever they call pltcl functions.
Worse yet, because the code was automatically loaded into both the "normal"
and "safe" interpreters at first use, the attacker could execute unrestricted
Tcl code in the "normal" interpreter without there being any pltclu functions
anywhere, or indeed anyone else using pltcl at all: installing pltcl is
sufficient to open the hole. Change the initialization logic so that the
"unknown" code is only loaded into an interpreter when the interpreter is
first really used. (That doesn't add any additional security in this
particular context, but it seems a prudent change, and anyway the former
behavior violated the principle of least astonishment.)
Security: CVE-2010-1170
fundamentally insecure. Instead apply an opmask to the whole interpreter that
imposes restrictions on unsafe operations. These restrictions are much harder
to subvert than is Safe.pm, since there is no container to be broken out of.
Backported to release 7.4.
In releases 7.4, 8.0 and 8.1 this also includes the necessary backporting of
the two interpreters model for plperl and plperlu adopted in release 8.2.
In versions 8.0 and up, the use of Perl's POSIX module to undo its locale
mangling on Windows has become insecure with these changes, so it is
replaced by our own routine, which is also faster.
Nice side effects of the changes include that it is now possible to use perl's
"strict" pragma in a natural way in plperl, and that perl's $a and
$b variables now work as expected in sort routines, and that function
compilation is significantly faster.
Tim Bunce and Andrew Dunstan, with reviews from Alex Hunsaker and
Alexey Klyukin.
Security: CVE-2010-1169
MaxStandbyDelay. Use the GUC units mechanism for the value, and choose more
appropriate timestamp functions for performing tests with it. Make the
ps_activity manipulation in ResolveRecoveryConflictWithVirtualXIDs have
behavior similar to ps_activity code elsewhere, notably not updating the
display when update_process_title is off and not truncating the display
contents at an arbitrarily-chosen length. Improve the docs to be explicit
about what MaxStandbyDelay actually measures, viz the difference between
primary and standby servers' clocks, and the possible hazards if their clocks
aren't in sync.
It appears that gmake gets confused if postgres.sgml is not present in
the working directory, and instantiates some default rule or other that
would let postgres.sgml be built from postgres.xml. I haven't been able
to track down exactly where that's coming from, but the problem can be
dodged by specifying srcdir explicitly in the rule for postgres.xml.
Per report from Vladimir Kokovic.
The previous coding had it in a pipe, which on most shells won't report
the error. Per experimentation with a bug report from Vladimir Kokovic.
This doesn't actually fix his problem, but it does explain why make
didn't report that there was a problem.
possible to set most of the SHM kernel parameters without a reboot.
Also, reorder the paragraph to explain the modern configuration method first.
There are probably not too many people who still care about how to do it on
OS X 10.3 or older.
to perform a backup without archive_mode being enabled. This gives up some
user-error protection in order to improve usefulness for streaming-replication
scenarios. Per discussion.
confusion with streaming-replication settings. Also, change its default
value to "off", because of concern about executing new and poorly-tested
code during ordinary non-replicating operation. Per discussion.
In passing do some minor editing of related documentation.
when building PDF output for recent versions of the documentation.
There is probably a better answer out there somewhere, but
we need something now so we can build beta releases.
rather than returning NULL for some-but-not-all failures as they used to.
Remove now-redundant tests for NULL from call sites.
We had to do something about this because many call sites were failing to
check for NULL; and changing it like this seems a lot more useful and
mistake-proof than adding checks to the call sites without them.
archival or hot standby should be WAL-logged, instead of deducing that from
other options like archive_mode. This replaces recovery_connections GUC in
the primary, where it now has no effect, but it's still used in the standby
to enable/disable hot standby.
Remove the WAL-logging of "unlogged operations", like creating an index
without WAL-logging and fsyncing it at the end. Instead, we keep a copy of
the wal_mode setting and the settings that affect how much shared memory a
hot standby server needs to track master transactions (max_connections,
max_prepared_xacts, max_locks_per_xact) in pg_control. Whenever the settings
change, at server restart, write a WAL record noting the new settings and
update pg_control. This allows us to notice the change in those settings in
the standby at the right moment, they used to be included in checkpoint
records, but that meant that a changed value was not reflected in the
standby until the first checkpoint after the change.
Bump PG_CONTROL_VERSION and XLOG_PAGE_MAGIC. Whack XLOG_PAGE_MAGIC back to
the sequence it used to follow, before hot standby and subsequent patches
changed it to 0x9003.
Normal superuser processes are allowed to connect even when the database
system is shutting down, or when fewer than superuser_reserved_connection
slots remain. This is intended to make sure an administrator can log in
and troubleshoot, so don't extend these same courtesies to users connecting
for replication.
than during define_custom_variable(). This entails rejecting an ALTER
command if the target variable doesn't have a known (non-placeholder)
definition, unless the calling user is superuser. When the variable *is*
known, we can correctly apply the rule that only superusers can issue ALTER
for SUSET parameters. This allows define_custom_variable to apply ALTER's
values for SUSET parameters at module load time, secure in the knowledge
that only a superuser could have set the ALTER value. This change fixes a
longstanding gotcha in the usage of SUSET-level custom parameters; which
is a good thing to fix now that plpgsql defines such a parameter.
with database = replication. The previous coding would allow them to match
ordinary records too, but that seems like a recipe for security breaches.
Improve the messages associated with no-such-pg_hba.conf entry to report
replication connections as such, since that's now a critical aspect of
whether the connection matches. Make some cursory improvements in the related
documentation, too.
Also, make the name of the GUC and the name of the backing variable match.
Alnong the way, clean up a couple of slight typographical errors in the
related docs.
In 8.4 and prior, WAL-logging could potentially be skipped whenever
archive_mode=off. With streaming replication, this is now true only
if max_wal_senders=0.
Fujii Masao, with light copyediting by me
The logic for determining whether to materialize has been significantly
overhauled for 9.0. In case there should be any doubt about whether
materialization is a win in any particular case, this should provide a
convenient way of seeing what happens without it; but even with enable_material
turned off, we still materialize in cases where it is required for
correctness.
Thanks to Tom Lane for the review.
doesn't take into account how far the WAL senders are. This way a hung
WAL sender doesn't prevent old WAL segments from being recycled/removed
in the primary, ultimately causing the disk to fill up. Instead add
standby_keep_segments setting to control how many old WAL segments are
kept in the primary. This also makes it more reliable to use streaming
replication without WAL archiving, assuming that you set
standby_keep_segments high enough.
At present, killing the startup process does not release any locks it holds,
so we must wait to stop the startup and walreceiver processes until all
read-only backends have exited. Without this patch, the startup and
walreceiver processes never exit, so the server gets permanently stuck in
a half-shutdown state.
Fujii Masao, with review, docs, and comment adjustments by me.
recovery. We might want to relax this in the future, but ThisTimeLineID
isn't currently correct in backends during recovery, so the filename
returned was wrong.
is changed to match the hard-wired default. This avoids accumulating useless
catalog entries, and also provides a path for dropping the owning role without
using DROP OWNED BY. Per yesterday's complaint from Jaime Casanova, the
need to use DROP OWNED BY for that is less than obvious, so providing this
alternative method might save some user frustration.
The endterm attribute is mainly useful when the toolchain does not support
automatic link target text generation for a particular situation. In the
past, this was required by the man page tools for all reference page links,
but that is no longer the case, and it now actually gets in the way of
proper automatic link text generation. The only remaining use cases are
currently xrefs to refsects.
loop in standby mode, trying to restore from archive, pg_xlog and
streaming.
Move sections around to make the high availability chapter more
coherent: the most prominent part is now a "Log-Shipping Standby Servers"
section that describes what a standby server is (like the old
"Warm Standby Servers for High Availability" section), and how to
set up a warm standby server, including streaming replication, using the
built-in standby mode. The pg_standby method is desribed in another
section called "Alternative method for log shipping", with the added
caveat that it doesn't work with streaming replication.
It is no longer installed by default, but included in "make world"/"make
install-world". Documentation updated accordingly.
Also, fix vpathsearch function to work when calling make install-docs
without previous make docs.
by a superuser -- "ALTER USER f RESET setting" already disallows removing such a
setting.
Apply the same treatment to ALTER DATABASE d RESET ALL when run by a database
owner that's not superuser.
writes. The first worker still uses "pgbench_log.<pid>" for the name, but
additional workers use "pgbench_log.<pid>.<serial-number>" instead.
Reported by Greg Smith.
Docs were unclear on whether or not database=replication was required,
nor did they mention the FATAL error this causes if database parameter is
mentioned explicitly, whatever its value.
in recovery_end_command, it always came out as 0 because InRedo was
cleared before recovery_end_command was executed. Also, always take
ControlFileLock when reading checkpoint location for %r.
The recovery_end_command bug and the missing locking was present in 8.4
as well, that part of this patch will be backported separately.
how often we do SSL session key renegotiation. Can be set to
0 to disable renegotiation completely, which is required if
a broken SSL library is used (broken patches to CVE-2009-3555
a known cause) or when using a client library that can't do
renegotiation.
This operates in the same way as other CREATE OR REPLACE commands, ie,
it replaces everything but the ownership and ACL lists of an existing
entry, and requires the caller to have owner privileges for that entry.
While modifying an existing language has some use in development scenarios,
in typical usage all the "replaced" values come from pg_pltemplate so there
will be no actual change in the language definition. The reason for adding
this is mainly to allow programs to ensure that a language exists without
triggering an error if it already does exist.
This commit just adds and documents the new option. A followon patch
will use it to clean up some unpleasant cases in pg_dump and pg_regress.
Bruce Momjian
Peter Eisentraut
Tom Lane
Magnus Hagander
Robert Haas
Andrew Dunstan
Simon Riggs
Itagaki Takahiro
Heikki Linnakangas
Alvaro Herrera