Because this strategy logs changes on a block-by-block basis, it
avoids the need to checkpoint before and after the operation.
However, because it logs each changed block individually, it might
generate a lot of extra write-ahead logging if the template database
is large. Therefore, the older strategy remains available via a new
STRATEGY parameter to CREATE DATABASE, and a corresponding --strategy
option to createdb.
Somewhat controversially, this patch assembles the list of relations
to be copied to the new database by reading the pg_class relation of
the template database. Cross-database access like this isn't normally
possible, but it can be made to work here because there can't be any
connections to the database being copied, nor can it contain any
in-doubt transactions. Even so, we have to use lower-level interfaces
than normal, since the table scan and relcache interfaces will not
work for a database to which we're not connected. The advantage of
this approach is that we do not need to rely on the filesystem to
determine what ought to be copied, but instead on PostgreSQL's own
knowledge of the database structure. This avoids, for example,
copying stray files that happen to be located in the source database
directory.
Dilip Kumar, with a fairly large number of cosmetic changes by me.
Reviewed and tested by Ashutosh Sharma, Andres Freund, John Naylor,
Greg Nancarrow, Neha Sharma. Additional feedback from Bruce Momjian,
Heikki Linnakangas, Julien Rouhaud, Adam Brusselback, Kyotaro
Horiguchi, Tomas Vondra, Andrew Dunstan, Álvaro Herrera, and others.
Discussion: http://postgr.es/m/CA+TgmoYtcdxBjLh31DLxUXHxFVMPGzrU5_T=CYCvRyFHywSBUQ@mail.gmail.com
Crash recovery on standby may encounter missing directories when
replaying create database WAL records. Prior to this patch, the standby
would fail to recover in such a case. However, the directories could be
legitimately missing. Consider a sequence of WAL records as follows:
CREATE DATABASE
DROP DATABASE
DROP TABLESPACE
If, after replaying the last WAL record and removing the tablespace
directory, the standby crashes and has to replay the create database
record again, the crash recovery must be able to move on.
This patch adds a mechanism similar to invalid-page tracking, to keep a
tally of missing directories during crash recovery. If all the missing
directory references are matched with corresponding drop records at the
end of crash recovery, the standby can safely continue following the
primary.
Backpatch to 13, at least for now. The bug is older, but fixing it in
older branches requires more careful study of the interactions with
commit e6d8069522, which appeared in 13.
A new TAP test file is added to verify the condition. However, because
it depends on commit d6d317dbf6, it can only be added to branch
master. I (Álvaro) manually verified that the code behaves as expected
in branch 14. It's a bit nervous-making to leave the code uncovered by
tests in older branches, but leaving the bug unfixed is even worse.
Also, the main reason this fix took so long is precisely that we
couldn't agree on a good strategy to approach testing for the bug, so
perhaps this is the best we can do.
Diagnosed-by: Paul Guo <paulguo@gmail.com>
Author: Paul Guo <paulguo@gmail.com>
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Author: Asim R Praveen <apraveen@pivotal.io>
Discussion: https://postgr.es/m/CAEET0ZGx9AvioViLf7nbR_8tH9-=27DN5xWJ2P9-ROH16e4JUA@mail.gmail.com
Teach xlogreader.c to decode the WAL into a circular buffer. This will
support optimizations based on looking ahead, to follow in a later
commit.
* XLogReadRecord() works as before, decoding records one by one, and
allowing them to be examined via the traditional XLogRecGetXXX()
macros and certain traditional members like xlogreader->ReadRecPtr.
* An alternative new interface XLogReadAhead()/XLogNextRecord() is
added that returns pointers to DecodedXLogRecord objects so that it's
now possible to look ahead in the WAL stream while replaying.
* In order to be able to use the new interface effectively while
streaming data, support is added for the page_read() callback to
respond to a new nonblocking mode with XLREAD_WOULDBLOCK instead of
waiting for more data to arrive.
No direct user of the new interface is included in this commit, though
XLogReadRecord() uses it internally. Existing code doesn't need to
change, except in a few places where it was accessing reader internals
directly and now needs to go through accessor macros.
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Reviewed-by: Andres Freund <andres@anarazel.de> (earlier versions)
Discussion: https://postgr.es/m/CA+hUKGJ4VJN8ttxScUFM8dOKX0BrBiboo5uz1cq=AovOddfHpA@mail.gmail.com
This moves the functions related to performing WAL recovery into the new
xlogrecovery.c source file, leaving xlog.c responsible for maintaining
the WAL buffers, coordinating the startup and switch from recovery to
normal operations, and other miscellaneous stuff that have always been in
xlog.c.
Reviewed-by: Andres Freund, Kyotaro Horiguchi, Robert Haas
Discussion: https://www.postgresql.org/message-id/a31f27b4-a31d-f976-6217-2b03be646ffa%40iki.fi
All such code deals with this global variable in one of three ways.
Sometimes the same functions use it in more than one of these ways
at the same time.
First, sometimes it's an implicit argument to one or more functions
being called in xlog.c or elsewhere, and must be set to the
appropriate value before calling those functions lest they
misbehave. In those cases, it is now passed as an explicit argument
instead.
Second, sometimes it's used to obtain the current timeline after
the end of recovery, i.e. the timeline to which WAL is being
written and flushed. Such code now calls GetWALInsertionTimeLine()
or relies on the new out parameter added to GetFlushRecPtr().
Third, sometimes it's used during recovery to store the current
replay timeline. That can change, so such code must generally
update the value before each use. It can still do that, but must
now use a local variable instead.
The net effect of these changes is to reduce by a fair amount the
amount of code that is directly accessing this global variable.
That's good, because history has shown that we don't always think
clearly about which timeline ID it's supposed to contain at any
given point in time, or indeed, whether it has been or needs to
be initialized at any given point in the code.
Patch by me, reviewed and tested by Michael Paquier, Amul Sul, and
Álvaro Herrera.
Discussion: https://postgr.es/m/CA+TgmobfAAqhfWa1kaFBBFvX+5CjM=7TE=n4r4Q1o2bjbGYBpA@mail.gmail.com
They are used in code that runs both during normal operation and during
WAL replay, and needs to behave differently during replay. Move them to
xlogutils.c, because that's where we have other helper functions used by
redo routines.
Reviewed-by: Andres Freund
Discussion: https://www.postgresql.org/message-id/b3b71061-4919-e882-4857-27e370ab134a%40iki.fi
This set of commits has some bugs with known fixes, but at this late
stage in the release cycle it seems best to revert and resubmit next
time, along with some new automated test coverage for this whole area.
Commits reverted:
dc88460c: Doc: Review for "Optionally prefetch referenced data in recovery."
1d257577: Optionally prefetch referenced data in recovery.
f003d9f8: Add circular WAL decoding buffer.
323cbe7c: Remove read_page callback from XLogReader.
Remove the new GUC group WAL_RECOVERY recently added by a55a9847, as the
corresponding section of config.sgml is now reverted.
Discussion: https://postgr.es/m/CAOuzzgrn7iKnFRsB4MHp3UisEQAGgZMbk_ViTN4HV4-Ksq8zCg%40mail.gmail.com
Introduce a new GUC recovery_prefetch, disabled by default. When
enabled, look ahead in the WAL and try to initiate asynchronous reading
of referenced data blocks that are not yet cached in our buffer pool.
For now, this is done with posix_fadvise(), which has several caveats.
Better mechanisms will follow in later work on the I/O subsystem.
The GUC maintenance_io_concurrency is used to limit the number of
concurrent I/Os we allow ourselves to initiate, based on pessimistic
heuristics used to infer that I/Os have begun and completed.
The GUC wal_decode_buffer_size is used to limit the maximum distance we
are prepared to read ahead in the WAL to find uncached blocks.
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com> (parts)
Reviewed-by: Andres Freund <andres@anarazel.de> (parts)
Reviewed-by: Tomas Vondra <tomas.vondra@2ndquadrant.com> (parts)
Tested-by: Tomas Vondra <tomas.vondra@2ndquadrant.com>
Tested-by: Jakub Wartak <Jakub.Wartak@tomtom.com>
Tested-by: Dmitry Dolgov <9erthalion6@gmail.com>
Tested-by: Sait Talha Nisanci <Sait.Nisanci@microsoft.com>
Discussion: https://postgr.es/m/CA%2BhUKGJ4VJN8ttxScUFM8dOKX0BrBiboo5uz1cq%3DAovOddfHpA%40mail.gmail.com
Teach xlogreader.c to decode its output into a circular buffer, to
support optimizations based on looking ahead.
* XLogReadRecord() works as before, consuming records one by one, and
allowing them to be examined via the traditional XLogRecGetXXX()
macros.
* An alternative new interface XLogNextRecord() is added that returns
pointers to DecodedXLogRecord structs that can be examined directly.
* XLogReadAhead() provides a second cursor that lets you see
further ahead, as long as data is available and there is enough space
in the decoding buffer. This returns DecodedXLogRecord pointers to the
caller, but also adds them to a queue of records that will later be
consumed by XLogNextRecord()/XLogReadRecord().
The buffer's size is controlled with wal_decode_buffer_size. The buffer
could potentially be placed into shared memory, for future projects.
Large records that don't fit in the circular buffer are called
"oversized" and allocated separately with palloc().
Discussion: https://postgr.es/m/CA+hUKGJ4VJN8ttxScUFM8dOKX0BrBiboo5uz1cq=AovOddfHpA@mail.gmail.com
Previously, the XLogReader module would fetch new input data using a
callback function. Redesign the interface so that it tells the caller
to insert more data with a special return value instead. This API suits
later patches for prefetching, encryption and maybe other future
projects that would otherwise require continually extending the callback
interface.
As incidental cleanup work, move global variables readOff, readLen and
readSegNo inside XlogReaderState.
Author: Kyotaro HORIGUCHI <horiguchi.kyotaro@lab.ntt.co.jp>
Author: Heikki Linnakangas <hlinnaka@iki.fi> (parts of earlier version)
Reviewed-by: Antonin Houska <ah@cybertec.at>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Reviewed-by: Takashi Menjo <takashi.menjo@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/20190418.210257.43726183.horiguchi.kyotaro%40lab.ntt.co.jp
Invent a new flag bit HASH_STRINGS to specify C-string hashing, which
was formerly the default; and add assertions insisting that exactly
one of the bits HASH_STRINGS, HASH_BLOBS, and HASH_FUNCTION be set.
This is in hopes of preventing recurrences of the type of oversight
fixed in commit a1b8aa1e4 (i.e., mistakenly omitting HASH_BLOBS).
Also, when HASH_STRINGS is specified, insist that the keysize be
more than 8 bytes. This is a heuristic, but it should catch
accidental use of HASH_STRINGS for integer or pointer keys.
(Nearly all existing use-cases set the keysize to NAMEDATALEN or
more, so there's little reason to think this restriction should
be problematic.)
Tweak hash_create() to insist that the HASH_ELEM flag be set, and
remove the defaults it had for keysize and entrysize. Since those
defaults were undocumented and basically useless, no callers
omitted HASH_ELEM anyway.
Also, remove memset's zeroing the HASHCTL parameter struct from
those callers that had one. This has never been really necessary,
and while it wasn't a bad coding convention it was confusing that
some callers did it and some did not. We might as well save a few
cycles by standardizing on "not".
Also improve the documentation for hash_create().
In passing, improve reinit.c's usage of a hash table by storing
the key as a binary Oid rather than a string; and, since that's
a temporary hash table, allocate it in CurrentMemoryContext for
neatness.
Discussion: https://postgr.es/m/590625.1607878171@sss.pgh.pa.us
While ereport() and elog() themselves are quite cheap when the
error message level is too low to be printed, some places need to do
substantial work before they can call those macros at all. To allow
optimizing away such setup work when nothing is to be printed, make
elog.c export a new function message_level_is_interesting(elevel)
that reports whether ereport/elog will do anything. Make use of that
in various places that had ad-hoc direct tests of log_min_messages etc.
Also teach ProcSleep to use it to avoid some work. (There may well
be other places that could usefully use this; I didn't search hard.)
Within elog.c, refactor a little bit to avoid having duplicate copies
of the policy-setting logic. When that code was written, we weren't
relying on the availability of inline functions; so it had some
duplications in the name of efficiency, which I got rid of.
Alvaro Herrera and Tom Lane
Discussion: https://postgr.es/m/129515.1606166429@sss.pgh.pa.us
* Have both physical and logical walsender share a 'xlogreader' state
struct for tracking state. This replaces the existing globals sendSeg
and sendCxt.
* Change WALRead not to receive XLogReaderState->seg and ->segcxt as
separate arguments anymore; just use the ones from 'state'. This is
made possible by the above change.
* have the XLogReader segment_open contract require the callbacks to
install the file descriptor in the state struct themselves instead of
returning it. xlogreader was already ignoring any possible failed
return from the callbacks, relying solely on them never returning.
(This point is not altogether excellent, as it means the callbacks
have to know more of XLogReaderState; but to really improve on that
we would have to pass back error info from the callbacks to
xlogreader. And the complexity would not be saved but instead just
transferred to the callers of WALRead, which would have to learn how
to throw errors from the open_segment callback in addition of, as
currently, from pg_pread.)
* segment_open no longer receives the 'segcxt' as a separate argument,
since it's part of the XLogReaderState argument.
Per comments from Kyotaro Horiguchi.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20200511203336.GA9913@alvherre.pgsql
The existing callers of XLogReadDetermineTimeline() performing recovery
need to check a replay LSN position when determining on which timeline
to read a WAL page. A portion of the comment describing this function
said exactly that, while referring to a routine for fetching a write
LSN, something not available in recovery.
Author: Kyotaro Horiguchi
Discussion: https://postgr.es/m/20200511.101619.2043820539323292957.horikyota.ntt@gmail.com
Code review for 0dc8ead463, prompted by a bug closed by 91c40548d5.
XLogReader's system for opening and closing segments had gotten too
complicated, with callbacks being passed at both the XLogReaderAllocate
level (read_page) as well as at the WALRead level (segment_open). This
was confusing and hard to follow, so restructure things so that these
callbacks are passed together at XLogReaderAllocate time, and add
another callback to the set (segment_close) to make it a coherent whole.
Also, ensure XLogReaderState is an argument to all the callbacks, so
that they can grab at the ->private data if necessary.
Document the whole arrangement more clearly.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20200422175754.GA19858@alvherre.pgsql
Until now, only selected bulk operations (e.g. COPY) did this. If a
given relfilenode received both a WAL-skipping COPY and a WAL-logged
operation (e.g. INSERT), recovery could lose tuples from the COPY. See
src/backend/access/transam/README section "Skipping WAL for New
RelFileNode" for the new coding rules. Maintainers of table access
methods should examine that section.
To maintain data durability, just before commit, we choose between an
fsync of the relfilenode and copying its contents to WAL. A new GUC,
wal_skip_threshold, guides that choice. If this change slows a workload
that creates small, permanent relfilenodes under wal_level=minimal, try
adjusting wal_skip_threshold. Users setting a timeout on COMMIT may
need to adjust that timeout, and log_min_duration_statement analysis
will reflect time consumption moving to COMMIT from commands like COPY.
Internally, this requires a reliable determination of whether
RollbackAndReleaseCurrentSubTransaction() would unlink a relation's
current relfilenode. Introduce rd_firstRelfilenodeSubid. Amend the
specification of rd_createSubid such that the field is zero when a new
rel has an old rd_node. Make relcache.c retain entries for certain
dropped relations until end of transaction.
Bump XLOG_PAGE_MAGIC, since this introduces XLOG_GIST_ASSIGN_LSN.
Future servers accept older WAL, so this bump is discretionary.
Kyotaro Horiguchi, reviewed (in earlier, similar versions) by Robert
Haas. Heikki Linnakangas and Michael Paquier implemented earlier
designs that materially clarified the problem. Reviewed, in earlier
designs, by Andrew Dunstan, Andres Freund, Alvaro Herrera, Tom Lane,
Fujii Masao, and Simon Riggs. Reported by Martijn van Oosterhout.
Discussion: https://postgr.es/m/20150702220524.GA9392@svana.org
Until now, only selected bulk operations (e.g. COPY) did this. If a
given relfilenode received both a WAL-skipping COPY and a WAL-logged
operation (e.g. INSERT), recovery could lose tuples from the COPY. See
src/backend/access/transam/README section "Skipping WAL for New
RelFileNode" for the new coding rules. Maintainers of table access
methods should examine that section.
To maintain data durability, just before commit, we choose between an
fsync of the relfilenode and copying its contents to WAL. A new GUC,
wal_skip_threshold, guides that choice. If this change slows a workload
that creates small, permanent relfilenodes under wal_level=minimal, try
adjusting wal_skip_threshold. Users setting a timeout on COMMIT may
need to adjust that timeout, and log_min_duration_statement analysis
will reflect time consumption moving to COMMIT from commands like COPY.
Internally, this requires a reliable determination of whether
RollbackAndReleaseCurrentSubTransaction() would unlink a relation's
current relfilenode. Introduce rd_firstRelfilenodeSubid. Amend the
specification of rd_createSubid such that the field is zero when a new
rel has an old rd_node. Make relcache.c retain entries for certain
dropped relations until end of transaction.
Back-patch to 9.5 (all supported versions). This introduces a new WAL
record type, XLOG_GIST_ASSIGN_LSN, without bumping XLOG_PAGE_MAGIC. As
always, update standby systems before master systems. This changes
sizeof(RelationData) and sizeof(IndexStmt), breaking binary
compatibility for affected extensions. (The most recent commit to
affect the same class of extensions was
089e4d405d0f3b94c74a2c6a54357a84a681754b.)
Kyotaro Horiguchi, reviewed (in earlier, similar versions) by Robert
Haas. Heikki Linnakangas and Michael Paquier implemented earlier
designs that materially clarified the problem. Reviewed, in earlier
designs, by Andrew Dunstan, Andres Freund, Alvaro Herrera, Tom Lane,
Fujii Masao, and Simon Riggs. Reported by Martijn van Oosterhout.
Discussion: https://postgr.es/m/20150702220524.GA9392@svana.org
Detection of WAL records having references to invalid pages
during recovery causes PostgreSQL to raise a PANIC-level error,
aborting the recovery. Setting ignore_invalid_pages to on causes
the system to ignore those WAL records (but still report a warning),
and continue recovery. This behavior may cause crashes, data loss,
propagate or hide corruption, or other serious problems.
However, it may allow you to get past the PANIC-level error,
to finish the recovery, and to cause the server to start up.
Author: Fujii Masao
Reviewed-by: Michael Paquier
Discussion: https://www.postgresql.org/message-id/CAHGQGwHCK6f77yeZD4MHOnN+PaTf6XiJfEB+Ce7SksSHjeAWtg@mail.gmail.com
XLogFileNameP() is a wrapper routine able to build a palloc'd string for
a WAL segment name, which is used for error string generation. There
were several code paths where it gets called in a critical section,
where memory allocation is not allowed. This results in triggering
an assertion failure instead of generating the wanted error message.
Another, more annoying, problem is that if the allocation to generate
the WAL segment name fails on OOM, then the failure would be escalated
to a PANIC.
This removes the routine and all its callers are replaced with a logic
using a fixed-size buffer. This way, all the existing mistakes are
fixed and future ones are prevented.
Author: Masahiko Sawada
Reviewed-by: Michael Paquier, Álvaro Herrera
Discussion: https://postgr.es/m/CA+fd4k5gC9H4uoWMLg9K_QfNrnkkdEw+-AFveob9YX7z8JnKTA@mail.gmail.com
XLogReader, walsender and pg_waldump all had their own routines to read
data from WAL files to memory, with slightly different approaches
according to the particular conditions of each environment. There's a
lot of commonality, so we can refactor that into a single routine
WALRead in XLogReader, and move the differences to a separate (simpler)
callback that just opens the next WAL-segment. This results in a
clearer (ahem) code flow.
The error reporting needs are covered by filling in a new error-info
struct, WALReadError, and it's the caller's responsibility to act on it.
The backend has WALReadRaiseError() to do so.
We no longer ever need to seek in this interface; switch to using
pg_pread().
Author: Antonin Houska, with contributions from Álvaro Herrera
Reviewed-by: Michaël Paquier, Kyotaro Horiguchi
Discussion: https://postgr.es/m/14984.1554998742@spoje.net
The state-tracking of WAL reading in various places was pretty messy,
mostly because the ancient physical-replication WAL reading code wasn't
using the XLogReader abstraction. This led to some untidy code. Make
it prettier by creating two additional supporting structs,
WALSegmentContext and WALOpenSegment which keep track of WAL-reading
state. This makes code cleaner, as well as supports more future
cleanup.
Author: Antonin Houska
Reviewed-by: Álvaro Herrera and (older versions) Robert Haas
Discussion: https://postgr.es/m/14984.1554998742@spoje.net
System calls mixed up in error code paths are causing two issues which
several code paths have not correctly handled:
1) For write() calls, sometimes the system may return less bytes than
what has been written without errno being set. Some paths were careful
enough to consider that case, and assumed that errno should be set to
ENOSPC, other calls missed that.
2) errno generated by a system call is overwritten by other system calls
which may succeed once an error code path is taken, causing what is
reported to the user to be incorrect.
This patch uses the brute-force approach of correcting all those code
paths. Some refactoring could happen in the future, but this is let as
future work, which is not targeted for back-branches anyway.
Author: Michael Paquier
Reviewed-by: Ashutosh Sharma
Discussion: https://postgr.es/m/20180622061535.GD5215@paquier.xyz
In commit 9c0a0de4c, I'd failed to notice that catalog/catalog.h
should also be considered a frontend-unsafe header, because it includes
(and needs) the full form of pg_class.h, not to mention relcache.h.
However, various frontend code was depending on it to get
TABLESPACE_VERSION_DIRECTORY, so refactoring of some sort is called for.
The cleanest answer seems to be to move TABLESPACE_VERSION_DIRECTORY,
as well as the OIDCHARS symbol, to common/relpath.h. Do that, and mop up
inclusions as necessary. (I found that quite a few current users of
catalog/catalog.h don't seem to need it at all anymore, apparently as a
result of the refactorings that created common/relpath.[hc]. And
initdb.c needed it only as a route to pg_class_d.h.)
Discussion: https://postgr.es/m/6629.1523294509@sss.pgh.pa.us
The file handling functions from fd.c were called with a diverse mix of
notations for the file permissions when they were opening new files.
Almost all files created by the server should have the same permissions
set. So change the API so that e.g. OpenTransientFile() automatically
uses the standard permissions set, and OpenTransientFilePerm() is a new
function that takes an explicit permissions set for the few cases where
it is needed. This also saves an unnecessary argument for call sites
that are just opening an existing file.
While we're reviewing these APIs, get rid of the FileName typedef and
use the standard const char * for the file name and mode_t for the file
mode. This makes these functions match other file handling functions
and removes an unnecessary layer of mysteriousness. We can also get rid
of a few casts that way.
Author: David Steele <david@pgmasters.net>
For performance reasons a larger segment size than the default 16MB
can be useful. A larger segment size has two main benefits: Firstly,
in setups using archiving, it makes it easier to write scripts that
can keep up with higher amounts of WAL, secondly, the WAL has to be
written and synced to disk less frequently.
But at the same time large segment size are disadvantageous for
smaller databases. So far the segment size had to be configured at
compile time, often making it unrealistic to choose one fitting to a
particularly load. Therefore change it to a initdb time setting.
This includes a breaking changes to the xlogreader.h API, which now
requires the current segment size to be configured. For that and
similar reasons a number of binaries had to be taught how to recognize
the current segment size.
Author: Beena Emerson, editorialized by Andres Freund
Reviewed-By: Andres Freund, David Steele, Kuntal Ghosh, Michael
Paquier, Peter Eisentraut, Robert Hass, Tushar Ahuja
Discussion: https://postgr.es/m/CAOG9ApEAcQ--1ieKbhFzXSQPw_YLmepaa4hNdnY5+ZULpt81Mw@mail.gmail.com
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Uses page-based mechanism to ensure we’re using the correct timeline.
Tests are included to exercise the functionality using a cold disk-level copy
of the master that's started up as a replica with slots intact, but the
intended use of the functionality is with later features.
Craig Ringer, reviewed by Simon Riggs and Andres Freund
Previous commits, notably 53be0b1add and
6f3bd98ebf, made it possible to see from
pg_stat_activity when a backend was stuck waiting for another backend,
but it's also fairly common for a backend to be stuck waiting for an
I/O. Add wait events for those operations, too.
Rushabh Lathia, with further hacking by me. Reviewed and tested by
Michael Paquier, Amit Kapila, Rajkumar Raghuwanshi, and Rahila Syed.
Discussion: http://postgr.es/m/CAGPqQf0LsYHXREPAZqYGVkDqHSyjf=KsD=k0GTVPAuzyThh-VQ@mail.gmail.com
When the new GUC wal_consistency_checking is set to a non-empty value,
it triggers recording of additional full-page images, which are
compared on the standby against the results of applying the WAL record
(without regard to those full-page images). Allowable differences
such as hints are masked out, and the resulting pages are compared;
any difference results in a FATAL error on the standby.
Kuntal Ghosh, based on earlier patches by Michael Paquier and Heikki
Linnakangas. Extensively reviewed and revised by Michael Paquier and
by me, with additional reviews and comments from Amit Kapila, Álvaro
Herrera, Simon Riggs, and Peter Eisentraut.
Some comments mentioned XLogReplayBuffer, but there's no such function:
that was an interim name for a function that got renamed to
XLogReadBufferForRedo, before commit 2c03216d83 was pushed.
Robert Haas
Alvaro Herrera
Thomas Munro
Heikki Linnakangas
Bruce Momjian
Peter Eisentraut
Michael Paquier
Tom Lane
Peter Geoghegan
Andres Freund
Noah Misch
Fujii Masao
Peter Eisentraut
Simon Riggs