Because this strategy logs changes on a block-by-block basis, it
avoids the need to checkpoint before and after the operation.
However, because it logs each changed block individually, it might
generate a lot of extra write-ahead logging if the template database
is large. Therefore, the older strategy remains available via a new
STRATEGY parameter to CREATE DATABASE, and a corresponding --strategy
option to createdb.
Somewhat controversially, this patch assembles the list of relations
to be copied to the new database by reading the pg_class relation of
the template database. Cross-database access like this isn't normally
possible, but it can be made to work here because there can't be any
connections to the database being copied, nor can it contain any
in-doubt transactions. Even so, we have to use lower-level interfaces
than normal, since the table scan and relcache interfaces will not
work for a database to which we're not connected. The advantage of
this approach is that we do not need to rely on the filesystem to
determine what ought to be copied, but instead on PostgreSQL's own
knowledge of the database structure. This avoids, for example,
copying stray files that happen to be located in the source database
directory.
Dilip Kumar, with a fairly large number of cosmetic changes by me.
Reviewed and tested by Ashutosh Sharma, Andres Freund, John Naylor,
Greg Nancarrow, Neha Sharma. Additional feedback from Bruce Momjian,
Heikki Linnakangas, Julien Rouhaud, Adam Brusselback, Kyotaro
Horiguchi, Tomas Vondra, Andrew Dunstan, Álvaro Herrera, and others.
Discussion: http://postgr.es/m/CA+TgmoYtcdxBjLh31DLxUXHxFVMPGzrU5_T=CYCvRyFHywSBUQ@mail.gmail.com
If TRUNCATE causes some buffers to be invalidated and thus the
checkpoint does not flush them, TRUNCATE must also ensure that the
corresponding files are truncated on disk. Otherwise, a replay
from the checkpoint might find that the buffers exist but have
the wrong contents, which may cause replay to fail.
Report by Teja Mupparti. Patch by Kyotaro Horiguchi, per a design
suggestion from Heikki Linnakangas, with some changes to the
comments by me. Review of this and a prior patch that approached
the issue differently by Heikki Linnakangas, Andres Freund, Álvaro
Herrera, Masahiko Sawada, and Tom Lane.
Discussion: http://postgr.es/m/BYAPR06MB6373BF50B469CA393C614257ABF00@BYAPR06MB6373.namprd06.prod.outlook.com
There's no visible point in casting the result of a comparison to
bool, because it already is that, at least on C99 compilers.
I see no point in these assertions that a pointer we're about to
dereference isn't null, either. If it is, the resulting SIGSEGV
will notify us of the problem just fine.
Noted while reviewing Zhihong Yu's patch. This is basically
cosmetic, so no need for back-patch.
Discussion: https://postgr.es/m/CALNJ-vT9r0DSsAOw9OXVJFxLENoVS_68kJ5x0p44atoYH+H4dg@mail.gmail.com
This macro cast the result to BlockNumber after shifting, not before,
which is the wrong thing. Per the C spec, the uint16 fields would
promote to int not unsigned int, so that (for 32-bit int) the shift
potentially shifts a nonzero bit into the sign position. I doubt
there are any production systems where this would actually end with
the wrong answer, but it is undefined behavior per the C spec, and
clang's -fsanitize=undefined option reputedly warns about it on some
platforms. (I can't reproduce that right now, but the code is
undeniably wrong per spec.) It's easy to fix by casting to
BlockNumber (uint32) in the proper places.
It's been wrong for ages, so back-patch to all supported branches.
Report and patch by Zhihong Yu (cosmetic tweaking by me)
Discussion: https://postgr.es/m/CALNJ-vT9r0DSsAOw9OXVJFxLENoVS_68kJ5x0p44atoYH+H4dg@mail.gmail.com
See also afdeff1052. Failures after that commit provided a few more hints,
but not yet enough to understand what's going on.
In 019_replslot_limit.pl shut down nodes with fast instead of immediate mode
if we observe the failure mode. That should tell us whether the failures we're
observing are just a timing issue under high load. PGCTLTIMEOUT should prevent
buildfarm animals from hanging endlessly.
Also adds a bit more logging to replication slot drop and ShutdownPostgres().
Discussion: https://postgr.es/m/20220225192941.hqnvefgdzaro6gzg@alap3.anarazel.de
Provide a way for WaitEventSet to report that the remote peer has shut
down its socket, independently of whether there is any buffered data
remaining to be read. This works only on systems where the kernel
exposes that information, namely:
* WAIT_USE_POLL builds using POLLRDHUP, if available
* WAIT_USE_EPOLL builds using EPOLLRDHUP
* WAIT_USE_KQUEUE builds using EV_EOF
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Reviewed-by: Maksim Milyutin <milyutinma@gmail.com>
Discussion: https://postgr.es/m/77def86b27e41f0efcba411460e929ae%40postgrespro.ru
Previously, it was possible for DROP DATABASE, DROP TABLESPACE and ALTER
DATABASE SET TABLESPACE to fail because other backends still had file
handles open for dropped tables. Windows won't allow a directory
containing unlinked-but-still-open files to be unlinked. Tackle this
problem by forcing all backends to close all smgr fds. No change for
Unix systems, which don't suffer from the problem, but the new code path
can be tested by Unix-based developers by defining
USE_BARRIER_SMGRRELEASE explicitly.
It's possible that PROCSIGNAL_BARRIER_SMGRRELEASE will have more
bug-fixing applications soon (under discussion). Note that this is the
first user of the ProcSignalBarrier mechanism from commit 16a4e4aec. It
could in principle be back-patched as far as 14, but since field
complaints are rare and ProcSignalBarrier hasn't been battle-tested,
that seems like a bad idea. Fix in master only, where these failures
have started to show up in automated testing due to new tests.
Suggested-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/CA+hUKGLdemy2gBm80kz20GTe6hNVwoErE8KwcJk6-U56oStjtg@mail.gmail.com
Instead of referring to target backends by pid, use pgprocno. This
means that we don't have to scan the ProcArray and we can drop some
special case code for dealing with the startup process.
Discussion: https://postgr.es/m/CA%2BhUKGLYRyDaneEwz5Uya_OgFLMx5BgJfkQSD%3Dq9HmwsfRRb-w%40mail.gmail.com
Reviewed-by: Soumyadeep Chakraborty <soumyadeep2007@gmail.com>
Reviewed-by: Ashwin Agrawal <ashwinstar@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
While determining xid horizons, we skip over backends that are running
Vacuum. We also ignore Create Index Concurrently, or Reindex Concurrently
for the purposes of computing Xmin for Vacuum. But we were not setting the
flags corresponding to these operations when they are performed in
parallel which was preventing Xid horizon from advancing.
The optimization related to skipping Create Index Concurrently, or Reindex
Concurrently operations was implemented in PG-14 but the fix is the same
for the Parallel Vacuum as well so back-patched till PG-13.
Author: Masahiko Sawada
Reviewed-by: Amit Kapila
Backpatch-through: 13
Discussion: https://postgr.es/m/CAD21AoCLQqgM1sXh9BrDFq0uzd3RBFKi=Vfo6cjjKODm0Onr5w@mail.gmail.com
The purpose of commit 8a54e12a38 was to
fix this, and it sufficed when the PREPARE TRANSACTION completed before
the CIC looked for lock conflicts. Otherwise, things still broke. As
before, in a cluster having used CIC while having enabled prepared
transactions, queries that use the resulting index can silently fail to
find rows. It may be necessary to reindex to recover from past
occurrences; REINDEX CONCURRENTLY suffices. Fix this for future index
builds by making CIC wait for arbitrarily-recent prepared transactions
and for ordinary transactions that may yet PREPARE TRANSACTION. As part
of that, have PREPARE TRANSACTION transfer locks to its dummy PGPROC
before it calls ProcArrayClearTransaction(). Back-patch to 9.6 (all
supported versions).
Andrey Borodin, reviewed (in earlier versions) by Andres Freund.
Discussion: https://postgr.es/m/01824242-AA92-4FE9-9BA7-AEBAFFEA3D0C@yandex-team.ru
Do not update shm_mq's mq_bytes_written until we have written
an amount of data greater than 1/4th of the ring size, unless
the caller of shm_mq_send(v) requests a flush at the end of
the message. This reduces the number of calls to SetLatch(),
and also the number of CPU cache misses, considerably, and thus
makes shm_mq significantly faster.
Dilip Kumar, reviewed by Zhihong Yu and Tomas Vondra. Some
minor cosmetic changes by me.
Discussion: http://postgr.es/m/CAFiTN-tVXqn_OG7tHNeSkBbN+iiCZTiQ83uakax43y1sQb2OBA@mail.gmail.com
This runtime-computed GUC shows the number of huge pages required
for the server's main shared memory area, taking advantage of the
work done in 0c39c29 and 0bd305e. This is useful for users to estimate
the amount of huge pages required for a server as it becomes possible to
do an estimation without having to start the server and potentially
allocate a large chunk of shared memory.
The number of huge pages is calculated based on the existing GUC
huge_page_size if set, or by using the system's default by looking at
/proc/meminfo on Linux. There is nothing new here as this commit reuses
the existing calculation methods, and just exposes this information
directly to the user. The routine calculating the huge page size is
refactored to limit the number of files with platform-specific flags.
This new GUC's name was the most popular choice based on the discussion
done. This is only supported on Linux.
I have taken the time to test the change on Linux, Windows and MacOS,
though for the last two ones large pages are not supported. The first
one calculates correctly the number of pages depending on the existing
GUC huge_page_size or the system's default.
Thanks to Andres Freund, Robert Haas, Kyotaro Horiguchi, Tom Lane,
Justin Pryzby (and anybody forgotten here) for the discussion.
Author: Nathan Bossart
Discussion: https://postgr.es/m/F2772387-CE0F-46BF-B5F1-CC55516EB885@amazon.com
This runtime-computed GUC shows the size of the server's main shared
memory area, taking into account the amount of shared memory allocated
by extensions as this is calculated after processing
shared_preload_libraries.
Author: Nathan Bossart
Discussion: https://postgr.es/m/F2772387-CE0F-46BF-B5F1-CC55516EB885@amazon.com
This change refactors the shared memory size calculation in
CreateSharedMemoryAndSemaphores() to its own function. This is intended
for use in a future change related to the setup of huge pages and shared
memory with some GUCs, while useful on its own for extensions.
Author: Nathan Bossart
Discussion: https://postgr.es/m/F2772387-CE0F-46BF-B5F1-CC55516EB885@amazon.com
Use one fileset for the entire worker lifetime instead of using
separate filesets for each streaming transaction. Now, the
changes/subxacts files for every streaming transaction will be
created under the same fileset and the files will be deleted
after the transaction is completed.
This patch extends the BufFileOpenFileSet and BufFileDeleteFileSet
APIs to allow users to specify whether to give an error on missing
files.
Author: Dilip Kumar, based on suggestion by Thomas Munro
Reviewed-by: Hou Zhijie, Masahiko Sawada, Amit Kapila
Discussion: https://postgr.es/m/E1mCC6U-0004Ik-Fs@gemulon.postgresql.org
Move fileset related implementation out of sharedfileset.c to allow its
usage by backends that don't want to share filesets among different
processes. After this split, fileset infrastructure is used by both
sharedfileset.c and worker.c for the named temporary files that survive
across transactions.
Author: Dilip Kumar, based on suggestion by Andres Freund
Reviewed-by: Hou Zhijie, Masahiko Sawada, Amit Kapila
Discussion: https://postgr.es/m/E1mCC6U-0004Ik-Fs@gemulon.postgresql.org
Like the ARM case, just use gcc's __sync_lock_test_and_set();
that will compile into AMOSWAP.W.AQ which does what we need.
At some point it might be worth doing some work on atomic ops
for RISC-V, but this should be enough for a creditable port.
Back-patch to all supported branches, just in case somebody
wants to try them on RISC-V.
Marek Szuba
Discussion: https://postgr.es/m/dea97b6d-f55f-1f6d-9109-504aa7dfa421@gentoo.org
As reported by a few OSX buildfarm animals there exist at least one path where
temporary files exist during AtProcExit_Files() processing. As temporary file
cleanup causes pgstat reporting, the assertions added in ee3f8d3d3a caused
failures.
This is not an OSX specific issue, we were just lucky that timing on OSX
reliably triggered the problem. The known way to cause this is a FATAL error
during perform_base_backup() with a MANIFEST used - adding an elog(FATAL)
after InitializeBackupManifest() reliably reproduces the problem in isolation.
The problem is that the temporary file created in InitializeBackupManifest()
is not cleaned up via resource owner cleanup as WalSndResourceCleanup()
currently is only used for non-FATAL errors. That then allows to reach
AtProcExit_Files() with existing temporary files, causing the assertion
failure.
To fix this problem, move temporary file cleanup to a before_shmem_exit() hook
and add assertions ensuring that no temporary files are created before / after
temporary file management has been initialized / shut down. The cleanest way
to do so seems to be to split fd.c initialization into two, one for plain file
access and one for temporary file access.
Right now there's no need to perform further fd.c cleanup during process exit,
so I just renamed AtProcExit_Files() to BeforeShmemExit_Files(). Alternatively
we could perform another pass through the files to check that no temporary
files exist, but the added assertions seem to provide enough protection
against that.
It might turn out that the assertions added in ee3f8d3d3a will cause too much
noise - in that case we'll have to downgrade them to a WARNING, at least
temporarily.
This commit is not necessarily the best approach to address this issue, but it
should resolve the buildfarm failures. We can revise later.
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20210807190131.2bm24acbebl4wl6i@alap3.anarazel.de
For EXEC_BACKEND InitProcess()/InitAuxiliaryProcess() needs to have been
called well before we call BaseInit(), as SubPostmasterMain() needs LWLocks to
work. Having the order of initialization differ between platforms makes it
unnecessarily hard to understand the system and to add initialization points
for new subsystems without a lot of duplication.
To be able to change the order, BaseInit() cannot trigger
CreateSharedMemoryAndSemaphores() anymore - obviously that needs to have
happened before we can call InitProcess(). It seems cleaner to create shared
memory explicitly in single user/bootstrap mode anyway.
After this change the separation of bufmgr initialization into
InitBufferPoolAccess() / InitBufferPoolBackend() is not meaningful anymore so
the latter is removed.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20210802164124.ufo5buo4apl6yuvs@alap3.anarazel.de
Start up the checkpointer and bgwriter during crash recovery (except in
--single mode), as we do for replication. This wasn't done back in
commit cdd46c76 out of caution. Now it seems like a better idea to make
the environment as similar as possible in both cases. There may also be
some performance advantages.
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Aleksander Alekseev <aleksander@timescale.com>
Tested-by: Jakub Wartak <Jakub.Wartak@tomtom.com>
Discussion: https://postgr.es/m/CA%2BhUKGJ8NRsqgkZEnsnRc2MFROBV-jCnacbYvtpptK2A9YYp9Q%40mail.gmail.com
Macs don't understand O_DIRECT, but they can disable caching with a
separate fcntl() call. Extend the file opening functions in fd.c to
handle this for us if the caller passes in PG_O_DIRECT.
For now, this affects only WAL data and even then only if you set:
max_wal_senders=0
wal_level=minimal
This is not expected to be very useful on its own, but later proposed
patches will make greater use of direct I/O, and it'll be useful for
testing if developers on Macs can see the effects.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA%2BhUKG%2BADiyyHe0cun2wfT%2BSVnFVqNYPxoO6J9zcZkVO7%2BNGig%40mail.gmail.com
Also "make reformat-dat-files".
The only change worthy of note is that pgindent messed up the formatting
of launcher.c's struct LogicalRepWorkerId, which led me to notice that
that struct wasn't used at all anymore, so I just took it out.
If you know the ID of a buffer that recently held a block that you would
like to pin, this function can be used check if it's still there. It
can be used to avoid a second lookup in the buffer mapping table after
PrefetchBuffer() reports a cache hit.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA+hUKGJ4VJN8ttxScUFM8dOKX0BrBiboo5uz1cq=AovOddfHpA@mail.gmail.com
Teach VACUUM to truncate the line pointer array of each heap page when a
contiguous group of LP_UNUSED line pointers appear at the end of the
array -- these unused and unreferenced items are excluded. This process
occurs during VACUUM's second pass over the heap, right after LP_DEAD
line pointers on the page (those encountered/pruned during the first
pass) are marked LP_UNUSED.
Truncation avoids line pointer bloat with certain workloads,
particularly those involving continual range DELETEs and bulk INSERTs
against the same table.
Also harden heapam code to check for an out-of-range page offset number
in places where we weren't already doing so.
Author: Matthias van de Meent <boekewurm+postgres@gmail.com>
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-By: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAEze2WjgaQc55Y5f5CQd3L=eS5CZcff2Obxp=O6pto8-f0hC4w@mail.gmail.com
Discussion: https://postgr.es/m/CAH2-Wzn6a64PJM1Ggzm=uvx2otsopJMhFQj_g1rAj4GWr3ZSzw@mail.gmail.com
Commit 3e98c0bafb added pg_backend_memory_contexts view to display
the memory contexts of the backend process. However its target process
is limited to the backend that is accessing to the view. So this is
not so convenient when investigating the local memory bloat of other
backend process. To improve this situation, this commit adds
pg_log_backend_memory_contexts() function that requests to log
the memory contexts of the specified backend process.
This information can be also collected by calling
MemoryContextStats(TopMemoryContext) via a debugger. But
this technique cannot be used in some environments because no debugger
is available there. So, pg_log_backend_memory_contexts() allows us to
see the memory contexts of specified backend more easily.
Only superusers are allowed to request to log the memory contexts
because allowing any users to issue this request at an unbounded rate
would cause lots of log messages and which can lead to denial of service.
On receipt of the request, at the next CHECK_FOR_INTERRUPTS(),
the target backend logs its memory contexts at LOG_SERVER_ONLY level,
so that these memory contexts will appear in the server log but not
be sent to the client. It logs one message per memory context.
Because if it buffers all memory contexts into StringInfo to log them
as one message, which may require the buffer to be enlarged very much
and lead to OOM error since there can be a large number of memory
contexts in a backend.
When a backend process is consuming huge memory, logging all its
memory contexts might overrun available disk space. To prevent this,
now this patch limits the number of child contexts to log per parent
to 100. As with MemoryContextStats(), it supposes that practical cases
where the log gets long will typically be huge numbers of siblings
under the same parent context; while the additional debugging value
from seeing details about individual siblings beyond 100 will not be large.
There was another proposed patch to add the function to return
the memory contexts of specified backend as the result sets,
instead of logging them, in the discussion. However that patch is
not included in this commit because it had several issues to address.
Thanks to Tatsuhito Kasahara, Andres Freund, Tom Lane, Tomas Vondra,
Michael Paquier, Kyotaro Horiguchi and Zhihong Yu for the discussion.
Bump catalog version.
Author: Atsushi Torikoshi
Reviewed-by: Kyotaro Horiguchi, Zhihong Yu, Fujii Masao
Discussion: https://postgr.es/m/0271f440ac77f2a4180e0e56ebd944d1@oss.nttdata.com
This implements asynchronous execution, which runs multiple parts of a
non-parallel-aware Append concurrently rather than serially to improve
performance when possible. Currently, the only node type that can be
run concurrently is a ForeignScan that is an immediate child of such an
Append. In the case where such ForeignScans access data on different
remote servers, this would run those ForeignScans concurrently, and
overlap the remote operations to be performed simultaneously, so it'll
improve the performance especially when the operations involve
time-consuming ones such as remote join and remote aggregation.
We may extend this to other node types such as joins or aggregates over
ForeignScans in the future.
This also adds the support for postgres_fdw, which is enabled by the
table-level/server-level option "async_capable". The default is false.
Robert Haas, Kyotaro Horiguchi, Thomas Munro, and myself. This commit
is mostly based on the patch proposed by Robert Haas, but also uses
stuff from the patch proposed by Kyotaro Horiguchi and from the patch
proposed by Thomas Munro. Reviewed by Kyotaro Horiguchi, Konstantin
Knizhnik, Andrey Lepikhov, Movead Li, Thomas Munro, Justin Pryzby, and
others.
Discussion: https://postgr.es/m/CA%2BTgmoaXQEt4tZ03FtQhnzeDEMzBck%2BLrni0UWHVVgOTnA6C1w%40mail.gmail.com
Discussion: https://postgr.es/m/CA%2BhUKGLBRyu0rHrDCMC4%3DRn3252gogyp1SjOgG8SEKKZv%3DFwfQ%40mail.gmail.com
Discussion: https://postgr.es/m/20200228.170650.667613673625155850.horikyota.ntt%40gmail.com
Since commit 2ce439f3 we have opened every file in the data directory
and called fsync() at the start of crash recovery. This can be very
slow if there are many files, leading to field complaints of systems
taking minutes or even hours to begin crash recovery.
Provide an alternative method, for Linux only, where we call syncfs() on
every possibly different filesystem under the data directory. This is
equivalent, but avoids faulting in potentially many inodes from
potentially slow storage.
The new mode comes with some caveats, described in the documentation, so
the default value for the new setting is "fsync", preserving the older
behavior.
Reported-by: Michael Brown <michael.brown@discourse.org>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Paul Guo <guopa@vmware.com>
Reviewed-by: Bruce Momjian <bruce@momjian.us>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: David Steele <david@pgmasters.net>
Discussion: https://postgr.es/m/11bc2bb7-ecb5-3ad0-b39f-df632734cd81%40discourse.org
Discussion: https://postgr.es/m/CAEET0ZHGnbXmi8yF3ywsDZvb3m9CbdsGZgfTXscQ6agcbzcZAw%40mail.gmail.com
This commit changes WAL archiver process so that it's treated as
an auxiliary process and can use shared memory. This is an infrastructure
patch required for upcoming shared-memory based stats collector patch
series. These patch series basically need any processes including archiver
that can report the statistics to access to shared memory. Since this patch
itself is useful to simplify the code and when users monitor the status of
archiver, it's committed separately in advance.
This commit simplifies the code for WAL archiving. For example, previously
backends need to signal to archiver via postmaster when they notify
archiver that there are some WAL files to archive. On the other hand,
this commit removes that signal to postmaster and enables backends to
notify archier directly using shared latch.
Also, as the side of this change, the information about archiver process
becomes viewable at pg_stat_activity view.
Author: Kyotaro Horiguchi
Reviewed-by: Andres Freund, Álvaro Herrera, Julien Rouhaud, Tomas Vondra, Arthur Zakirov, Fujii Masao
Discussion: https://postgr.es/m/20180629.173418.190173462.horiguchi.kyotaro@lab.ntt.co.jp
1. Backends waiting for buffer I/O are now interruptible.
2. If something goes wrong in a backend that is currently performing
I/O, waiting backends no longer wake up until that backend reaches
AbortBufferIO() and broadcasts on the CV. Previously, any waiters would
wake up (because the I/O lock was automatically released) and then
busy-loop until AbortBufferIO() cleared BM_IO_IN_PROGRESS.
3. LWLockMinimallyPadded is removed, as it would now be unused.
Author: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us> (earlier version, 2016)
Discussion: https://postgr.es/m/CA%2BhUKGJ8nBFrjLuCTuqKN0pd2PQOwj9b_jnsiGFFMDvUxahj_A%40mail.gmail.com
Discussion: https://postgr.es/m/CA+Tgmoaj2aPti0yho7FeEf2qt-JgQPRWb0gci_o1Hfr=C56Xng@mail.gmail.com
Traditionally, SIGUSR1 has been overloaded for ad-hoc signals,
procsignal.c signals and latch.c wakeups. Move that last use over to a
new dedicated signal. SIGURG is normally used to report out-of-band
socket data, but PostgreSQL doesn't use that facility.
The signal handler is now installed in all postmaster children by
InitializeLatchSupport(). Those wishing to disconnect from it should
call ShutdownLatchSupport().
Future patches will use this separation of signals to avoid the need for
a signal handler on some operating systems.
Discussion: https://postgr.es/m/CA+hUKGJjxPDpzBE0a3hyUywBvaZuC89yx3jK9RFZgfv_KHU7gg@mail.gmail.com
This adds a new executor node named TID Range Scan. The query planner
will generate paths for TID Range scans when quals are discovered on base
relations which search for ranges on the table's ctid column. These
ranges may be open at either end. For example, WHERE ctid >= '(10,0)';
will return all tuples on page 10 and over.
To support this, two new optional callback functions have been added to
table AM. scan_set_tidrange is used to set the scan range to just the
given range of TIDs. scan_getnextslot_tidrange fetches the next tuple
in the given range.
For AMs were scanning ranges of TIDs would not make sense, these functions
can be set to NULL in the TableAmRoutine. The query planner won't
generate TID Range Scan Paths in that case.
Author: Edmund Horner, David Rowley
Reviewed-by: David Rowley, Tomas Vondra, Tom Lane, Andres Freund, Zhihong Yu
Discussion: https://postgr.es/m/CAMyN-kB-nFTkF=VA_JPwFNo08S0d-Yk0F741S2B7LDmYAi8eyA@mail.gmail.com
Otherwise we risk "leaking" deleted pages by making them non-recyclable
indefinitely. Commit 6655a729 did the same thing for deleted pages in
GiST indexes. That work was used as a starting point here.
Stop storing an XID indicating the oldest bpto.xact across all deleted
though unrecycled pages in nbtree metapages. There is no longer any
reason to care about that condition/the oldest XID. It only ever made
sense when wraparound was something _bt_vacuum_needs_cleanup() had to
consider.
The btm_oldest_btpo_xact metapage field has been repurposed and renamed.
It is now btm_last_cleanup_num_delpages, which is used to remember how
many non-recycled deleted pages remain from the last VACUUM (in practice
its value is usually the precise number of pages that were _newly
deleted_ during the specific VACUUM operation that last set the field).
The general idea behind storing btm_last_cleanup_num_delpages is to use
it to give _some_ consideration to non-recycled deleted pages inside
_bt_vacuum_needs_cleanup() -- though never too much. We only really
need to avoid leaving a truly excessive number of deleted pages in an
unrecycled state forever. We only do this to cover certain narrow cases
where no other factor makes VACUUM do a full scan, and yet the index
continues to grow (and so actually misses out on recycling existing
deleted pages).
These metapage changes result in a clear user-visible benefit: We no
longer trigger full index scans during VACUUM operations solely due to
the presence of only 1 or 2 known deleted (though unrecycled) blocks
from a very large index. All that matters now is keeping the costs and
benefits in balance over time.
Fix an issue that has been around since commit 857f9c36, which added the
"skip full scan of index" mechanism (i.e. the _bt_vacuum_needs_cleanup()
logic). The accuracy of btm_last_cleanup_num_heap_tuples accidentally
hinged upon _when_ the source value gets stored. We now always store
btm_last_cleanup_num_heap_tuples in btvacuumcleanup(). This fixes the
issue because IndexVacuumInfo.num_heap_tuples (the source field) is
expected to accurately indicate the state of the table _after_ the
VACUUM completes inside btvacuumcleanup().
A backpatchable fix cannot easily be extracted from this commit. A
targeted fix for the issue will follow in a later commit, though that
won't happen today.
I (pgeoghegan) have chosen to remove any mention of deleted pages in the
documentation of the vacuum_cleanup_index_scale_factor GUC/param, since
the presence of deleted (though unrecycled) pages is no longer of much
concern to users. The vacuum_cleanup_index_scale_factor description in
the docs now seems rather unclear in any case, and it should probably be
rewritten in the near future. Perhaps some passing mention of page
deletion will be added back at the same time.
Bump XLOG_PAGE_MAGIC due to nbtree WAL records using full XIDs now.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznpdHvujGUwYZ8sihX=d5u-tRYhi-F4wnV2uN2zHpMUXw@mail.gmail.com
This commit adds new column "waitstart" into pg_locks view. This column
reports the time when the server process started waiting for the lock
if the lock is not held. This information is useful, for example, when
examining the amount of time to wait on a lock by subtracting
"waitstart" in pg_locks from the current time, and identify the lock
that the processes are waiting for very long.
This feature uses the current time obtained for the deadlock timeout
timer as "waitstart" (i.e., the time when this process started waiting
for the lock). Since getting the current time newly can cause overhead,
we reuse the already-obtained time to avoid that overhead.
Note that "waitstart" is updated without holding the lock table's
partition lock, to avoid the overhead by additional lock acquisition.
This can cause "waitstart" in pg_locks to become NULL for a very short
period of time after the wait started even though "granted" is false.
This is OK in practice because we can assume that users are likely to
look at "waitstart" when waiting for the lock for a long time.
The first attempt of this patch (commit 3b733fcd04) caused the buildfarm
member "rorqual" (built with --disable-atomics --disable-spinlocks) to report
the failure of the regression test. It was reverted by commit 890d2182a2.
The cause of this failure was that the atomic variable for "waitstart"
in the dummy process entry created at the end of prepare transaction was
not initialized. This second attempt fixes that issue.
Bump catalog version.
Author: Atsushi Torikoshi
Reviewed-by: Ian Lawrence Barwick, Robert Haas, Justin Pryzby, Fujii Masao
Discussion: https://postgr.es/m/a96013dc51cdc56b2a2b84fa8a16a993@oss.nttdata.com
This commit adds new column "waitstart" into pg_locks view. This column
reports the time when the server process started waiting for the lock
if the lock is not held. This information is useful, for example, when
examining the amount of time to wait on a lock by subtracting
"waitstart" in pg_locks from the current time, and identify the lock
that the processes are waiting for very long.
This feature uses the current time obtained for the deadlock timeout
timer as "waitstart" (i.e., the time when this process started waiting
for the lock). Since getting the current time newly can cause overhead,
we reuse the already-obtained time to avoid that overhead.
Note that "waitstart" is updated without holding the lock table's
partition lock, to avoid the overhead by additional lock acquisition.
This can cause "waitstart" in pg_locks to become NULL for a very short
period of time after the wait started even though "granted" is false.
This is OK in practice because we can assume that users are likely to
look at "waitstart" when waiting for the lock for a long time.
Bump catalog version.
Author: Atsushi Torikoshi
Reviewed-by: Ian Lawrence Barwick, Robert Haas, Justin Pryzby, Fujii Masao
Discussion: https://postgr.es/m/a96013dc51cdc56b2a2b84fa8a16a993@oss.nttdata.com
In a cluster having used CREATE INDEX CONCURRENTLY while having enabled
prepared transactions, queries that use the resulting index can silently
fail to find rows. Fix this for future CREATE INDEX CONCURRENTLY by
making it wait for prepared transactions like it waits for ordinary
transactions. This expands the VirtualTransactionId structure domain to
admit prepared transactions. It may be necessary to reindex to recover
from past occurrences. Back-patch to 9.5 (all supported versions).
Andrey Borodin, reviewed (in earlier versions) by Tom Lane and Michael
Paquier.
Discussion: https://postgr.es/m/2E712143-97F7-4890-B470-4A35142ABC82@yandex-team.ru
This file has failed headerscheck/cpluspluscheck verification since
commit 0650ff230, as a result of referencing typedef TimestampTz
without including the appropriate header.
This is like commit c98763bf51, but for REINDEX CONCURRENTLY. To wit:
this flags indicates that the current process is safe to ignore for the
purposes of waiting for other snapshots, when doing CREATE INDEX
CONCURRENTLY and REINDEX CONCURRENTLY. This helps two processes doing
either of those things not deadlock, and also avoids spurious waits.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Dmitry Dolgov <9erthalion6@gmail.com>
Reviewed-by: Hamid Akhtar <hamid.akhtar@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/20201130195439.GA24598@alvherre.pgsql
Remove redundant function declaration and improve header comment in
pg_iovec.h. Move the new declaration in fd.h next to a group of more
similar functions.
macOS's ranlib issued a warning about an empty pread.o file with the
previous arrangement, on systems new enough to require no replacement
functions. Let's go back to using configure's AC_REPLACE_FUNCS system
to build and include each .o in the library only if it's needed, which
requires moving the *v() functions to their own files.
Also move the _with_retry() wrapper to a more permanent home.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/1283127.1610554395%40sss.pgh.pa.us
This is a follow-up of the work done in commit 0650ff2303. This commit
extends log_recovery_conflict_waits so that a log message is produced
also when recovery conflict has already been resolved after deadlock_timeout
passes, i.e., when the startup process finishes waiting for recovery
conflict after deadlock_timeout. This is useful in investigating how long
recovery conflicts prevented the recovery from applying WAL.
Author: Fujii Masao
Reviewed-by: Kyotaro Horiguchi, Bertrand Drouvot
Discussion: https://postgr.es/m/9a60178c-a853-1440-2cdc-c3af916cff59@amazon.com
Similar to commit d6ad34f341, this patch optimizes
DropRelFileNodesAllBuffers() by avoiding the complete buffer pool scan and
instead find the buffers to be invalidated by doing lookups in the
BufMapping table.
This optimization helps operations where the relation files need to be
removed like Truncate, Drop, Abort of Create Table, etc.
Author: Kirk Jamison
Reviewed-by: Kyotaro Horiguchi, Takayuki Tsunakawa, and Amit Kapila
Tested-By: Haiying Tang
Discussion: https://postgr.es/m/OSBPR01MB3207DCA7EC725FDD661B3EDAEF660@OSBPR01MB3207.jpnprd01.prod.outlook.com
The recovery path of DropRelFileNodeBuffers() is optimized so that
scanning of the whole buffer pool can be avoided when the number of
blocks to be truncated in a relation is below a certain threshold. For
such cases, we find the buffers by doing lookups in BufMapping table.
This improves the performance by more than 100 times in many cases
when several small tables (tested with 1000 relations) are truncated
and where the server is configured with a large value of shared
buffers (greater than equal to 100GB).
This optimization helps cases (a) when vacuum or autovacuum truncated off
any of the empty pages at the end of a relation, or (b) when the relation is
truncated in the same transaction in which it was created.
This commit introduces a new API smgrnblocks_cached which returns a cached
value for the number of blocks in a relation fork. This helps us to determine
the exact size of relation which is required to apply this optimization. The
exact size is required to ensure that we don't leave any buffer for the
relation being dropped as otherwise the background writer or checkpointer
can lead to a PANIC error while flushing buffers corresponding to files that
don't exist.
Author: Kirk Jamison based on ideas by Amit Kapila
Reviewed-by: Kyotaro Horiguchi, Takayuki Tsunakawa, and Amit Kapila
Tested-By: Haiying Tang
Discussion: https://postgr.es/m/OSBPR01MB3207DCA7EC725FDD661B3EDAEF660@OSBPR01MB3207.jpnprd01.prod.outlook.com
This commit adds GUC log_recovery_conflict_waits that controls whether
a log message is produced when the startup process is waiting longer than
deadlock_timeout for recovery conflicts. This is useful in determining
if recovery conflicts prevent the recovery from applying WAL.
Note that currently a log message is produced only when recovery conflict
has not been resolved yet even after deadlock_timeout passes, i.e.,
only when the startup process is still waiting for recovery conflict
even after deadlock_timeout.
Author: Bertrand Drouvot, Masahiko Sawada
Reviewed-by: Alvaro Herrera, Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/9a60178c-a853-1440-2cdc-c3af916cff59@amazon.com
This GUC variable works much like idle_in_transaction_session_timeout,
in that it kills sessions that have waited too long for a new client
query. But it applies when we're not in a transaction, rather than
when we are.
Li Japin, reviewed by David Johnston and Hayato Kuroda, some
fixes by me
Discussion: https://postgr.es/m/763A0689-F189-459E-946F-F0EC4458980B@hotmail.com
The deadlocks that the recovery conflict on lock is involved in can
happen between hot-standby backends and the startup process.
If a backend takes an access exclusive lock on the table and which
finally triggers the deadlock, that deadlock can be detected
as expected. On the other hand, previously, if the startup process
took an access exclusive lock and which finally triggered the deadlock,
that deadlock could not be detected and could remain even after
deadlock_timeout passed. This is a bug.
The cause of this bug was that the code for handling the recovery
conflict on lock didn't take care of deadlock case at all. It assumed
that deadlocks involving the startup process and backends were able
to be detected by the deadlock detector invoked within backends.
But this assumption was incorrect. The startup process also should
have invoked the deadlock detector if necessary.
To fix this bug, this commit makes the startup process invoke
the deadlock detector if deadlock_timeout is reached while handling
the recovery conflict on lock. Specifically, in that case, the startup
process requests all the backends holding the conflicting locks to
check themselves for deadlocks.
Back-patch to v9.6. v9.5 has also this bug, but per discussion we decided
not to back-patch the fix to v9.5. Because v9.5 doesn't have some
infrastructure codes (e.g., 37c54863cf) that this bug fix patch depends on.
We can apply those codes for the back-patch, but since the next minor
version release is the final one for v9.5, it's risky to do that. If we
unexpectedly introduce new bug to v9.5 by the back-patch, there is no
chance to fix that. We determined that the back-patch to v9.5 would give
more risk than gain.
Author: Fujii Masao
Reviewed-by: Bertrand Drouvot, Masahiko Sawada, Kyotaro Horiguchi
Discussion: https://postgr.es/m/4041d6b6-cf24-a120-36fa-1294220f8243@oss.nttdata.com
Robert Haas
Tom Lane
Andres Freund
Thomas Munro
Bruce Momjian
Amit Kapila
Noah Misch
Michael Paquier
Peter Geoghegan
Fujii Masao
Etsuro Fujita
David Rowley
Alvaro Herrera