windows.h includes a lot of other headers, slowing down compilation
significantly. WIN32_LEAN_AND_MEAN reduces that a bit. It'd be better to
remove the include of windows.h (as well as indirect inclusions of it) from such
a central place, but until then...
Discussion: https://postgr.es/m/20210921193035.pqzay43vpyv7in43@alap3.anarazel.de
Prior to v14, we insisted that the query in RETURN QUERY be of a type
that returns tuples. (For instance, INSERT RETURNING was allowed,
but not plain INSERT.) That happened indirectly because we opened a
cursor for the query, so spi.c checked SPI_is_cursor_plan(). As a
consequence, the error message wasn't terribly on-point, but at least
it was there.
Commit 2f48ede08 lost this detail. Instead, plain RETURN QUERY
insisted that the query be a SELECT (by checking for SPI_OK_SELECT)
while RETURN QUERY EXECUTE failed to check the query type at all.
Neither of these changes was intended.
The only convenient place to check this in the EXECUTE case is inside
_SPI_execute_plan, because we haven't done parse analysis until then.
So we need to pass down a flag saying whether to enforce that the
query returns tuples. Fortunately, we can squeeze another boolean
into struct SPIExecuteOptions without an ABI break, since there's
padding space there. (It's unlikely that any extensions would
already be using this new struct, but preserving ABI in v14 seems
like a smart idea anyway.)
Within spi.c, it seemed like _SPI_execute_plan's parameter list
was already ridiculously long, and I didn't want to make it longer.
So I thought of passing SPIExecuteOptions down as-is, allowing that
parameter list to become much shorter. This makes the patch a bit
more invasive than it might otherwise be, but it's all internal to
spi.c, so that seems fine.
Per report from Marc Bachmann. Back-patch to v14 where the
faulty code came in.
Discussion: https://postgr.es/m/1F2F75F0-27DF-406F-848D-8B50C7EEF06A@gmail.com
Commit 84f5c2908 forgot to consider the possibility that
EnsurePortalSnapshotExists could run inside a subtransaction with
lifespan shorter than the Portal's. In that case, the new active
snapshot would be popped at the end of the subtransaction, leaving
a dangling pointer in the Portal, with mayhem ensuing.
To fix, make sure the ActiveSnapshot stack entry is marked with
the same subtransaction nesting level as the associated Portal.
It's certainly safe to do so since we won't be here at all unless
the stack is empty; hence we can't create an out-of-order stack.
Let's also apply this logic in the case where PortalRunUtility
sets portalSnapshot, just to be sure that path can't cause similar
problems. It's slightly less clear that that path can't create
an out-of-order stack, so add an assertion guarding it.
Report and patch by Bertrand Drouvot (with kibitzing by me).
Back-patch to v11, like the previous commit.
Discussion: https://postgr.es/m/ff82b8c5-77f4-3fe7-6028-fcf3303e82dd@amazon.com
This field was recently added in db632fbca, however that commit missed one
place where it should have initialized the new field to NULL. The missed
location is where the PartitionBoundInfo is created for partition-wise
join relations. Technically there could be interleaved partitions in a
partition-wise join relation, but currently the only optimization we use
this field for only does so for base rels and other member rels. So just
document that we don't populate this field for join rels.
Reported-by: Amit Langote
Author: Amit Langote, David Rowley
Reviewed-by: Amit Langote, David Rowley
Discussion: https://postgr.es/m/CA+HiwqE76Rps24kwHsd2Cr82Ua07tJC9t9reG0c7ScX9n_xrEA@mail.gmail.com
Add ETIMEDOUT to ALL_CONNECTION_FAILURE_ERRNOS' list of "errnos that
identify hard failure of a previously-established network connection".
While one could imagine that this is sometimes recoverable, the same
could be said of other entries such as ENETDOWN.
In support of this, handle ETIMEDOUT on par with other socket errors
in relevant infrastructure, such as TranslateSocketError().
(I made a couple of cosmetic adjustments in TranslateSocketError(),
too.) The code now assumes that ETIMEDOUT is defined everywhere,
which it should be given that POSIX has required it since SUSv2.
Perhaps this should be back-patched, but I'm hesitant to do so given
the lack of previous complaints, and the hazard that there's a small
ABI break on Windows from redefining the symbol. Even if we decide
to do that, it'd be prudent to let this bake awhile in HEAD first.
Jelte Fennema
Discussion: https://postgr.es/m/AM5PR83MB01782BFF2978505F6D6C559AF7AA9@AM5PR83MB0178.EURPRD83.prod.outlook.com
Physical replication always ships WAL segment files to replicas once
they are complete. This is a problem if one WAL record is split across
a segment boundary and the primary server crashes before writing down
the segment with the next portion of the WAL record: WAL writing after
crash recovery would happily resume at the point where the broken record
started, overwriting that record ... but any standby or backup may have
already received a copy of that segment, and they are not rewinding.
This causes standbys to stop following the primary after the latter
crashes:
LOG: invalid contrecord length 7262 at A8/D9FFFBC8
because the standby is still trying to read the continuation record
(contrecord) for the original long WAL record, but it is not there and
it will never be. A workaround is to stop the replica, delete the WAL
file, and restart it -- at which point a fresh copy is brought over from
the primary. But that's pretty labor intensive, and I bet many users
would just give up and re-clone the standby instead.
A fix for this problem was already attempted in commit 515e3d84a0, but
it only addressed the case for the scenario of WAL archiving, so
streaming replication would still be a problem (as well as other things
such as taking a filesystem-level backup while the server is down after
having crashed), and it had performance scalability problems too; so it
had to be reverted.
This commit fixes the problem using an approach suggested by Andres
Freund, whereby the initial portion(s) of the split-up WAL record are
kept, and a special type of WAL record is written where the contrecord
was lost, so that WAL replay in the replica knows to skip the broken
parts. With this approach, we can continue to stream/archive segment
files as soon as they are complete, and replay of the broken records
will proceed across the crash point without a hitch.
Because a new type of WAL record is added, users should be careful to
upgrade standbys first, primaries later. Otherwise they risk the standby
being unable to start if the primary happens to write such a record.
A new TAP test that exercises this is added, but the portability of it
is yet to be seen.
This has been wrong since the introduction of physical replication, so
backpatch all the way back. In stable branches, keep the new
XLogReaderState members at the end of the struct, to avoid an ABI
break.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Nathan Bossart <bossartn@amazon.com>
Discussion: https://postgr.es/m/202108232252.dh7uxf6oxwcy@alvherre.pgsql
That allows to include just visibilitymapdefs.h from file.c, and in turn,
remove include of postgres.h from relcache.h.
Reported-by: Andres Freund
Discussion: https://postgr.es/m/20210913232614.czafiubr435l6egi%40alap3.anarazel.de
Author: Alexander Korotkov
Reviewed-by: Andres Freund, Tom Lane, Alvaro Herrera
Backpatch-through: 13
Updates/Deletes on a partition were allowed even without replica identity
after the parent table was added to a publication. This would later lead
to an error on subscribers. The reason was that we were not invalidating
the partition's relcache and the publication information for partitions
was not getting rebuilt. Similarly, we were not invalidating the
partitions' relcache after dropping a partitioned table from a publication
which will prohibit Updates/Deletes on its partition without replica
identity even without any publication.
Reported-by: Haiying Tang
Author: Hou Zhijie and Vignesh C
Reviewed-by: Vignesh C and Amit Kapila
Backpatch-through: 13
Discussion: https://postgr.es/m/OS0PR01MB6113D77F583C922F1CEAA1C3FBD29@OS0PR01MB6113.jpnprd01.prod.outlook.com
It is not appropriate for deduplication to apply single value strategy
when triggered by a bottom-up index deletion pass. This wastes cycles
because later bottom-up deletion passes will overinterpret older
duplicate tuples that deduplication actually just skipped over "by
design". It also makes bottom-up deletion much less effective for low
cardinality indexes that happen to cross a meaningless "index has single
key value per leaf page" threshold.
To fix, slightly narrow the conditions under which deduplication's
single value strategy is considered. We already avoided the strategy
for a unique index, since our high level goal must just be to buy time
for VACUUM to run (not to buy space). We'll now also avoid it when we
just had a bottom-up pass that reported failure. The two cases share
the same high level goal, and already overlapped significantly, so this
approach is quite natural.
Oversight in commit d168b666, which added bottom-up index deletion.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-WznaOvM+Gyj-JQ0X=JxoMDxctDTYjiEuETdAGbF5EUc3MA@mail.gmail.com
Backpatch: 14-, where bottom-up deletion was introduced.
I noticed that commit 0bead9af48 left this flag undocumented in
XLogSetRecordFlags, which led me to discover that the flag doesn't
actually do what the one comment on it said it does. Improve the
situation by adding some more comments.
Backpatch to 14, where the aforementioned commit appears.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/202109212119.c3nhfp64t2ql@alvherre.pgsql
This runtime-computed GUC shows the number of huge pages required
for the server's main shared memory area, taking advantage of the
work done in 0c39c29 and 0bd305e. This is useful for users to estimate
the amount of huge pages required for a server as it becomes possible to
do an estimation without having to start the server and potentially
allocate a large chunk of shared memory.
The number of huge pages is calculated based on the existing GUC
huge_page_size if set, or by using the system's default by looking at
/proc/meminfo on Linux. There is nothing new here as this commit reuses
the existing calculation methods, and just exposes this information
directly to the user. The routine calculating the huge page size is
refactored to limit the number of files with platform-specific flags.
This new GUC's name was the most popular choice based on the discussion
done. This is only supported on Linux.
I have taken the time to test the change on Linux, Windows and MacOS,
though for the last two ones large pages are not supported. The first
one calculates correctly the number of pages depending on the existing
GUC huge_page_size or the system's default.
Thanks to Andres Freund, Robert Haas, Kyotaro Horiguchi, Tom Lane,
Justin Pryzby (and anybody forgotten here) for the discussion.
Author: Nathan Bossart
Discussion: https://postgr.es/m/F2772387-CE0F-46BF-B5F1-CC55516EB885@amazon.com
The upcoming shared memory stats patch drops stats for dropped objects in a
transactional manner, rather than removing them later as part of vacuum. This
means that stats for DROP inside a transaction needs to handle aborted
(sub-)transactions similar to TRUNCATE: The stats up to the DROP should be
restored.
Rename the existing infrastructure in preparation.
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20210405092914.mmxqe7j56lsjfsej@alap3.anarazel.de
It was harder than necessary to understand PostgresMain() because the code for
a normal backend was interspersed with single-user mode specific code. Split
most of the single-user mode code into its own function
PostgresSingleUserMain(), that does all the necessary setup for single-user
mode, and then hands off after that to PostgresMain().
There still is some single-user mode code in InitPostgres(), and it'd likely
be worth moving at least some of it out. But that's for later.
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20210802164124.ufo5buo4apl6yuvs@alap3.anarazel.de
Session statistics, as introduced by 960869da08, had several shortcomings:
- an additional GetCurrentTimestamp() call that also impaired the accuracy of
the data collected
This can be avoided by passing the current timestamp we already have in
pgstat_report_stat().
- an additional statistics UDP packet sent every 500ms
This is solved by adding the new statistics to PgStat_MsgTabstat.
This is conceptually ugly, because session statistics are not
table statistics. But the struct already contains data unrelated
to tables, so there is not much damage done.
Connection and disconnection are reported in separate messages, which
reduces the number of additional messages to two messages per session and a
slight increase in PgStat_MsgTabstat size (but the same number of table
stats fit).
- Session time computation could overflow on systems where long is 32 bit.
Reported-By: Andres Freund <andres@anarazel.de>
Author: Andres Freund <andres@anarazel.de>
Author: Laurenz Albe <laurenz.albe@cybertec.at>
Discussion: https://postgr.es/m/20210801205501.nyxzxoelqoo4x2qc%40alap3.anarazel.de
Backpatch: 14-, where the feature was introduced.
Until now, the -C option of postgres was handled before a small subset
of GUCs computed at runtime are initialized, leading to incorrect
results as GUC machinery would fall back to default values for such
parameters.
For example, data_checksums could report "off" for a cluster as the
control file is not loaded yet. Or wal_segment_size would show a
segment size at 16MB even if initdb --wal-segsize used something else.
Worse, the command would fail to properly report the recently-introduced
shared_memory, that requires to load shared_preload_libraries as these
could ask for a chunk of shared memory.
Support for runtime GUCs comes with a limitation, as the operation is
now allowed on a running server. One notable reason for this is that
_PG_init() functions of loadable libraries are called before all
runtime-computed GUCs are initialized, and this is not guaranteed to be
safe to do on running servers. For the case of shared_memory_size,
where we want to know how much memory would be used without allocating
it, this limitation is fine. Another case where this will help is for
huge pages, with the introduction of a different GUC to evaluate the
amount of huge pages required for a server before starting it, without
having to allocate large chunks of memory.
This feature is controlled with a new GUC flag, and four parameters are
classified as runtime-computed as of this change:
- data_checksums
- shared_memory_size
- data_directory_mode
- wal_segment_size
Some TAP tests are added to provide some coverage here, using
data_checksums in the tests of pg_checksums.
Per discussion with Andres Freund, Justin Pryzby, Magnus Hagander and
more.
Author: Nathan Bossart
Discussion: https://postgr.es/m/F2772387-CE0F-46BF-B5F1-CC55516EB885@amazon.com
Up to now the size of a query's rangetable has been limited by the
constants INNER_VAR et al, which mustn't be equal to any real
rangetable index. 65000 doubtless seemed like enough for anybody,
and it still is orders of magnitude larger than the number of joins
we can realistically handle. However, we need a rangetable entry
for each child partition that is (or might be) processed by a query.
Queries with a few thousand partitions are getting more realistic,
so that the day when that limit becomes a problem is in sight,
even if it's not here yet. Hence, let's raise the limit.
Rather than just increase the values of INNER_VAR et al, this patch
adopts the approach of making them small negative values, so that
rangetables could theoretically become as long as INT_MAX.
The bulk of the patch is concerned with changing Var.varno and some
related variables from "Index" (unsigned int) to plain "int". This
is basically cosmetic, with little actual effect other than to help
debuggers print their values nicely. As such, I've only bothered
with changing places that could actually see INNER_VAR et al, which
the parser and most of the planner don't. We do have to be careful
in places that are performing less/greater comparisons on varnos,
but there are very few such places, other than the IS_SPECIAL_VARNO
macro itself.
A notable side effect of this patch is that while it used to be
possible to add INNER_VAR et al to a Bitmapset, that will now
draw an error. I don't see any likelihood that it wouldn't be a
bug to include these fake varnos in a bitmapset of real varnos,
so I think this is all to the good.
Although this touches outfuncs/readfuncs, I don't think a catversion
bump is required, since stored rules would never contain Vars
with these fake varnos.
Andrey Lepikhov and Tom Lane, after a suggestion by Peter Eisentraut
Discussion: https://postgr.es/m/43c7f2f5-1e27-27aa-8c65-c91859d15190@postgrespro.ru
Formerly, we sent signals for outgoing NOTIFY messages within
ProcessCompletedNotifies, which was also responsible for sending
relevant ones of those messages to our connected client. It therefore
had to run during the main-loop processing that occurs just before
going idle. This arrangement had two big disadvantages:
* Now that procedures allow intra-command COMMITs, it would be
useful to send NOTIFYs to other sessions immediately at COMMIT
(though, for reasons of wire-protocol stability, we still shouldn't
forward them to our client until end of command).
* Background processes such as replication workers would not send
NOTIFYs at all, since they never execute the client communication
loop. We've had requests to allow triggers running in replication
workers to send NOTIFYs, so that's a problem.
To fix these things, move transmission of outgoing NOTIFY signals
into AtCommit_Notify, where it will happen during CommitTransaction.
Also move the possible call of asyncQueueAdvanceTail there, to
ensure we don't bloat the async SLRU if a background worker sends
many NOTIFYs with no one listening.
We can also drop the call of asyncQueueReadAllNotifications,
allowing ProcessCompletedNotifies to go away entirely. That's
because commit 790026972 added a call of ProcessNotifyInterrupt
adjacent to PostgresMain's call of ProcessCompletedNotifies,
and that does its own call of asyncQueueReadAllNotifications,
meaning that we were uselessly doing two such calls (inside two
separate transactions) whenever inbound notify signals coincided
with an outbound notify. We need only set notifyInterruptPending
to ensure that ProcessNotifyInterrupt runs, and we're done.
The existing documentation suggests that custom background workers
should call ProcessCompletedNotifies if they want to send NOTIFY
messages. To avoid an ABI break in the back branches, reduce it
to an empty routine rather than removing it entirely. Removal
will occur in v15.
Although the problems mentioned above have existed for awhile,
I don't feel comfortable back-patching this any further than v13.
There was quite a bit of churn in adjacent code between 12 and 13.
At minimum we'd have to also backpatch 51004c717, and a good deal
of other adjustment would also be needed, so the benefit-to-risk
ratio doesn't look attractive.
Per bug #15293 from Michael Powers (and similar gripes from others).
Artur Zakirov and Tom Lane
Discussion: https://postgr.es/m/153243441449.1404.2274116228506175596@wrigleys.postgresql.org
It's possible for us to copy an AlternativeSubPlan expression node
into multiple places, for example the scan quals of several
partition children. Then it's possible that we choose a different
one of the alternatives as optimal in each place. Commit 41efb8340
failed to consider this scenario, so its attempt to remove "unused"
subplans could remove subplans that were still used elsewhere.
Fix by delaying the removal logic until we've examined all the
AlternativeSubPlans in a given query level. (This does assume that
AlternativeSubPlans couldn't get copied to other query levels, but
for the foreseeable future that's fine; cf qual_is_pushdown_safe.)
Per report from Rajkumar Raghuwanshi. Back-patch to v14
where the faulty logic came in.
Discussion: https://postgr.es/m/CAKcux6==O3NNZC3bZ2prRYv3cjm3_Zw1GfzmOjEVqYN4jub2+Q@mail.gmail.com
If an allocation failed within LLVM it is not safe to call back into LLVM as
LLVM is not generally safe against exceptions / stack-unwinding. Thus errors
while in LLVM code are promoted to FATAL. However llvm_shutdown() did call
back into LLVM even in such cases, while llvm_release_context() was careful
not to do so.
We cannot generally skip shutting down LLVM, as that can break profiling. But
it's OK to do so if there was an error from within LLVM.
Reported-By: Jelte Fennema <Jelte.Fennema@microsoft.com>
Author: Andres Freund <andres@anarazel.de>
Author: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/AM5PR83MB0178C52CCA0A8DEA0207DC14F7FF9@AM5PR83MB0178.EURPRD83.prod.outlook.com
Backpatch: 11-, where jit was introduced
Two functions, both named check_permissions(), used the same checks to
verify if a user had required privileges to work on replication slots.
This commit removes the duplication, and moves the function doing the
checks to slot.c to be centralized.
Author: Bharath Rupireddy
Reviewed-by: Nathan Bossart, Euler Taveira
Discussion: https://postgr.es/m/CALj2ACUPpVw1u7sQocFVWrSs0n10pt_G_4NPZKSxXK6cW1dErw@mail.gmail.com
The previous protocol expected a set of matching characters to check if
a message sent was the last one or not, that changed depending on the
destination wanted:
- 't' and 'f' tracked the last message of a log sent to stderr.
- 'T' and 'F' tracked the last message of a log sent to csvlog.
This could be extended with more characters when introducing new
destinations, but using a bitmask is much more elegant. This commit
changes the protocol so as a bitmask is used in the header of a log
chunk message sent to the syslogger, with the following options
available for now:
- log_destination as stderr.
- log_destination as csvlog.
- if a message is the last chunk of a message.
Sehrope found this issue in a patch set to introduce JSON as an option
for log_destination, but his patch made the size of the protocol header
larger. This commit keeps the same size as the original, and adapts the
protocol as wanted.
Thanks also to Andrew Dunstan and Greg Stark for the discussion.
Author: Michael Paquier, Sehrope Sarkuni
Discussion: https://postgr.es/m/CAH7T-aqswBM6JWe4pDehi1uOiufqe06DJWaU5=X7dDLyqUExHg@mail.gmail.com
This switches the default ACL to what the documentation has recommended
since CVE-2018-1058. Upgrades will carry forward any old ownership and
ACL. Sites that declined the 2018 recommendation should take a fresh
look. Recipes for commissioning a new database cluster from scratch may
need to create a schema, grant more privileges, etc. Out-of-tree test
suites may require such updates.
Reviewed by Peter Eisentraut.
Discussion: https://postgr.es/m/20201031163518.GB4039133@rfd.leadboat.com
The Value node struct is a weird construct. It is its own node type,
but most of the time, it actually has a node type of Integer, Float,
String, or BitString. As a consequence, the struct name and the node
type don't match most of the time, and so it has to be treated
specially a lot. There doesn't seem to be any value in the special
construct. There is very little code that wants to accept all Value
variants but nothing else (and even if it did, this doesn't provide
any convenient way to check it), and most code wants either just one
particular node type (usually String), or it accepts a broader set of
node types besides just Value.
This change removes the Value struct and node type and replaces them
by separate Integer, Float, String, and BitString node types that are
proper node types and structs of their own and behave mostly like
normal node types.
Also, this removes the T_Null node tag, which was previously also a
possible variant of Value but wasn't actually used outside of the
Value contained in A_Const. Replace that by an isnull field in
A_Const.
Reviewed-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/5ba6bc5b-3f95-04f2-2419-f8ddb4c046fb@enterprisedb.com
Commit 01e658fa74 added hash support for row types. This also added
support for hashing anonymous record types, using the same approach
that the type cache uses for comparison support for record types: It
just reports that it works, but it might fail at run time if a
component type doesn't actually support the operation. We get away
with that for comparison because most types support that. But some
types don't support hashing, so the current state can result in
failures at run time where the planner chooses hashing over sorting,
whereas that previously worked if only sorting was an option.
We do, however, want the record hashing support for path tracking in
recursive unions, and the SEARCH and CYCLE clauses built on that. In
that case, hashing is the only plan option. So enable that, this
commit implements the following approach: The type cache does not
report that hashing is available for the record type. This undoes
that part of 01e658fa74. Instead, callers that require hashing no
matter what can override that result themselves. This patch only
touches the callers to make the aforementioned recursive query cases
work, namely the parse analysis of unions, as well as the hash_array()
function.
Reported-by: Sait Talha Nisanci <sait.nisanci@microsoft.com>
Bug: #17158
Discussion: https://www.postgresql.org/message-id/flat/17158-8a2ba823982537a4%40postgresql.org
Updates/Deletes on a relation were allowed even without replica identity
after we define the publication for all tables. This would later lead to
an error on subscribers. The reason was that for such publications we were
not invalidating the relcache and the publication information for
relations was not getting rebuilt. Similarly, we were not invalidating the
relcache after dropping of such publications which will prohibit
Updates/Deletes without replica identity even without any publication.
Author: Vignesh C and Hou Zhijie
Reviewed-by: Hou Zhijie, Kyotaro Horiguchi, Amit Kapila
Backpatch-through: 10, where it was introduced
Discussion: https://postgr.es/m/CALDaNm0pF6zeWqCA8TCe2sDuwFAy8fCqba=nHampCKag-qLixg@mail.gmail.com
This runtime-computed GUC shows the size of the server's main shared
memory area, taking into account the amount of shared memory allocated
by extensions as this is calculated after processing
shared_preload_libraries.
Author: Nathan Bossart
Discussion: https://postgr.es/m/F2772387-CE0F-46BF-B5F1-CC55516EB885@amazon.com
These encapsulate a relation when referred from replication DDL.
Currently they don't do anything useful (they're just wrappers around
RangeVar and Relation respectively) but in the future they'll be used to
carry column lists.
Extracted from a larger patch by Rahila Syed.
Author: Rahila Syed <rahilasyed90@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/CAH2L28vddB_NFdRVpuyRBJEBWjz4BSyTB=_ektNRH8NJ1jf95g@mail.gmail.com
pgtime.h documented the PG interpretation of tm_mon right alongside
the POSIX interpretation of tm_year, with no hint that neither
comment was correct throughout our code.
Perhaps someday we ought to switch to using two separate struct
definitions to provide a clearer indication of which semantics are
in use where. But I fear the tedium-versus-safety-gain tradeoff
would not be very good.
Discussion: https://postgr.es/m/CAJ7c6TOMG8zSNEZtCn5SPe+cCk3Lfxb71ZaQwT2F4T7PJ_t=KA@mail.gmail.com
Historically, timetz_zone() has used time(NULL) as the reference point
for deciding whether DST is active. That means its result can change
intra-statement, requiring it to be marked VOLATILE (cf. 35979e6c3).
But that definition is pretty inconsistent with the way we deal with
timestamps elsewhere. Let's make it use the transaction start time
("now()") as the reference point instead. That lets it be marked
STABLE, and also saves a kernel call per invocation.
While at it, remove the function's use of pg_time_t and pg_localtime.
Those are inconsistent with the other code in this area, which indeed
created a bug: timetz_zone() delivered completely wrong answers if
the zone was specified by a dynamic TZ abbreviation. (We need to do
something about that in the back branches, but the fix will look
different from this.)
Aleksander Alekseev and Tom Lane
Discussion: https://postgr.es/m/CAJ7c6TOMG8zSNEZtCn5SPe+cCk3Lfxb71ZaQwT2F4T7PJ_t=KA@mail.gmail.com
This change refactors the shared memory size calculation in
CreateSharedMemoryAndSemaphores() to its own function. This is intended
for use in a future change related to the setup of huge pages and shared
memory with some GUCs, while useful on its own for extensions.
Author: Nathan Bossart
Discussion: https://postgr.es/m/F2772387-CE0F-46BF-B5F1-CC55516EB885@amazon.com
543f36b43d was too hasty in thinking that the volatility of date_bin()
had to match date_trunc(), since only the latter references
session_timezone.
Bump catversion
Per feedback from Aleksander Alekseev
Backpatch to v14, as the former commit was
This commit allows pg_stat_reset_single_table_counters() to reset statistics
for a single relation shared across all databases in the cluster to zero.
Bump catalog version.
Author: B Sadhu Prasad Patro
Reviewed-by: Mahendra Singh Thalor, Himanshu Upadhyaya, Dilip Kumar, Fujii Masao
Discussion: https://postgr.es/m/CAFF0-CGy7EHeF=AqqkGMF85cySPQBgDcvNk73G2O0vL94O5U5A@mail.gmail.com
Use one fileset for the entire worker lifetime instead of using
separate filesets for each streaming transaction. Now, the
changes/subxacts files for every streaming transaction will be
created under the same fileset and the files will be deleted
after the transaction is completed.
This patch extends the BufFileOpenFileSet and BufFileDeleteFileSet
APIs to allow users to specify whether to give an error on missing
files.
Author: Dilip Kumar, based on suggestion by Thomas Munro
Reviewed-by: Hou Zhijie, Masahiko Sawada, Amit Kapila
Discussion: https://postgr.es/m/E1mCC6U-0004Ik-Fs@gemulon.postgresql.org
Move fileset related implementation out of sharedfileset.c to allow its
usage by backends that don't want to share filesets among different
processes. After this split, fileset infrastructure is used by both
sharedfileset.c and worker.c for the named temporary files that survive
across transactions.
Author: Dilip Kumar, based on suggestion by Andres Freund
Reviewed-by: Hou Zhijie, Masahiko Sawada, Amit Kapila
Discussion: https://postgr.es/m/E1mCC6U-0004Ik-Fs@gemulon.postgresql.org
Previously, on the subscriber, we set the error context callback for the
tuple data conversion failures. This commit replaces the existing error
context callback with a comprehensive one so that it shows not only the
details of data conversion failures but also the details of logical change
being applied by the apply worker or table sync worker. The additional
information displayed will be the command, transaction id, and timestamp.
The error context is added to an error only when applying a change but not
while doing other work like receiving data etc.
This will help users in diagnosing the problems that occur during logical
replication. It also can be used for future work that allows skipping a
particular transaction on the subscriber.
Author: Masahiko Sawada
Reviewed-by: Hou Zhijie, Greg Nancarrow, Haiying Tang, Amit Kapila
Tested-by: Haiying Tang
Discussion: https://postgr.es/m/CAD21AoDeScrsHhLyEPYqN3sydg6PxAPVBboK=30xJfUVihNZDA@mail.gmail.com
The hardcoded "wide character" set in ucs_wcwidth() was last updated
around the Unicode 5.0 era. This led to misalignment when printing
emojis and other codepoints that have since been designated
wide or full-width.
To fix and keep up to date, extend update-unicode to download the list
of wide and full-width codepoints from the offical sources.
In passing, remove some comments about non-spacing characters that
haven't been accurate since we removed the former hardcoded logic.
Jacob Champion
Reported and reviewed by Pavel Stehule
Discussion: https://www.postgresql.org/message-id/flat/CAFj8pRCeX21O69YHxmykYySYyprZAqrKWWg0KoGKdjgqcGyygg@mail.gmail.com
Commit 325f2ec555 introduced pg_class.relwrite to skip operations on
tables created as part of a heap rewrite during DDL. It links such
transient heaps to the original relation OID via this new field in
pg_class but forgot to do anything about toast tables. So, logical
decoding was not able to skip operations on internally created toast
tables. This leads to an error when we tried to decode the WAL for the
next operation for which it appeared that there is a toast data where
actually it didn't have any toast data.
To fix this, we set pg_class.relwrite for internally created toast tables
as well which allowed skipping operations on them during logical decoding.
Author: Bertrand Drouvot
Reviewed-by: David Zhang, Amit Kapila
Backpatch-through: 11, where it was introduced
Discussion: https://postgr.es/m/b5146fb1-ad9e-7d6e-f980-98ed68744a7c@amazon.com
WAL records may span multiple segments, but XLogWrite() does not
wait for the entire record to be written out to disk before
creating archive status files. Instead, as soon as the last WAL page of
the segment is written, the archive status file is created, and the
archiver may process it. If PostgreSQL crashes before it is able to
write and flush the rest of the record (in the next WAL segment), the
wrong version of the first segment file lingers in the archive, which
causes operations such as point-in-time restores to fail.
To fix this, keep track of records that span across segments and ensure
that segments are only marked ready-for-archival once such records have
been completely written to disk.
This has always been wrong, so backpatch all the way back.
Author: Nathan Bossart <bossartn@amazon.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Ryo Matsumura <matsumura.ryo@fujitsu.com>
Reviewed-by: Andrey Borodin <x4mmm@yandex-team.ru>
Discussion: https://postgr.es/m/CBDDFA01-6E40-46BB-9F98-9340F4379505@amazon.com
We've supported parallel aggregation since e06a38965. At the time, we
didn't quite get around to also adding parallel DISTINCT. So, let's do
that now.
This is implemented by introducing a two-phase DISTINCT. Phase 1 is
performed on parallel workers, rows are made distinct there either by
hashing or by sort/unique. The results from the parallel workers are
combined and the final distinct phase is performed serially to get rid of
any duplicate rows that appear due to combining rows for each of the
parallel workers.
Author: David Rowley
Reviewed-by: Zhihong Yu
Discussion: https://postgr.es/m/CAApHDvrjRxVKwQN0he79xS+9wyotFXL=RmoWqGGO2N45Farpgw@mail.gmail.com
transformLockingClause neglected to exclude the pseudo-RTEs for
OLD/NEW when processing a rule's query. This led to odd errors
or even crashes later on. This bug is very ancient, but it's
not terribly surprising that nobody noticed, since the use-case
for SELECT FOR UPDATE in a non-view rule is somewhere between
thin and non-existent. Still, crashing is not OK.
Per bug #17151 from Zhiyong Wu. Thanks to Masahiko Sawada
for analysis of the problem.
Discussion: https://postgr.es/m/17151-c03a3e6e4ec9aadb@postgresql.org
In the code, most places used the term "Stream Stop" for the logical
stream message. This commit improves consistency by renaming LogicalRepMsgType
"LOGICAL_REP_MSG_STREAM_END" to "LOGICAL_REP_MSG_STREAM_STOP".
Author: Masahiko Sawada
Reviewed-by: Hou Zhijie, Amit Kapila
Discussion: https://postgr.es/m/CAD21AoDeScrsHhLyEPYqN3sydg6PxAPVBboK=30xJfUVihNZDA@mail.gmail.com
This is a combined revert of the following commits:
- c3826f8, a refactoring piece that moved the hex decoding code to
src/common/. This code was cleaned up by aef8948, as it originally
included no overflow checks in the same way as the base64 routines in
src/common/ used by SCRAM, making it unsafe for its purpose.
- aef8948, a more advanced refactoring of the hex encoding/decoding code
to src/common/ that added sanity checks on the result buffer for hex
decoding and encoding. As reported by Hans Buschmann, those overflow
checks are expensive, and it is possible to see a performance drop in
the decoding/encoding of bytea or LOs the longer they are. Simple SQLs
working on large bytea values show a clear difference in perf profile.
- ccf4e27, a cleanup made possible by aef8948.
The reverts of all those commits bring back the performance of hex
decoding and encoding back to what it was in ~13. Fow now and
post-beta3, this is the simplest option.
Reported-by: Hans Buschmann
Discussion: https://postgr.es/m/1629039545467.80333@nidsa.net
Backpatch-through: 14
If recordDependencyOnCurrentExtension is invoked on a pre-existing,
free-standing object during an extension update script, that object
will become owned by the extension. In our current code this is
possible in three cases:
* Replacing a "shell" type or operator.
* CREATE OR REPLACE overwriting an existing object.
* ALTER TYPE SET, ALTER DOMAIN SET, and ALTER OPERATOR SET.
The first of these cases is intentional behavior, as noted by the
existing comments for GenerateTypeDependencies. It seems like
appropriate behavior for CREATE OR REPLACE too; at least, the obvious
alternatives are not better. However, the fact that it happens during
ALTER is an artifact of trying to share code (GenerateTypeDependencies
and makeOperatorDependencies) between the CREATE and ALTER cases.
Since an extension script would be unlikely to ALTER an object that
didn't already belong to the extension, this behavior is not very
troubling for the direct target object ... but ALTER TYPE SET will
recurse to dependent domains, and it is very uncool for those to
become owned by the extension if they were not already.
Let's fix this by redefining the ALTER cases to never change extension
membership, full stop. We could minimize the behavioral change by
only changing the behavior when ALTER TYPE SET is recursing to a
domain, but that would complicate the code and it does not seem like
a better definition.
Per bug #17144 from Alex Kozhemyakin. Back-patch to v13 where ALTER
TYPE SET was added. (The other cases are older, but since they only
affect the directly-named object, there's not enough of a problem to
justify changing the behavior further back.)
Discussion: https://postgr.es/m/17144-e67d7a8f049de9af@postgresql.org
This reverts the following commits:
1b5617eb84 Describe (auto-)analyze behavior for partitioned tables
0e69f705cc Set pg_class.reltuples for partitioned tables
41badeaba8 Document ANALYZE storage parameters for partitioned tables
0827e8af70 autovacuum: handle analyze for partitioned tables
There are efficiency issues in this code when handling databases with
large numbers of partitions, and it doesn't look like there isn't any
trivial way to handle those. There are some other issues as well. It's
now too late in the cycle for nontrivial fixes, so we'll have to let
Postgres 14 users continue to manually deal with ANALYZE their
partitioned tables, and hopefully we can fix the issues for Postgres 15.
I kept [most of] be280cdad2 ("Don't reset relhasindex for partitioned
tables on ANALYZE") because while we added it due to 0827e8af70, it is
a good bugfix in its own right, since it affects manual analyze as well
as autovacuum-induced analyze, and there's no reason to revert it.
I retained the addition of relkind 'p' to tables included by
pg_stat_user_tables, because reverting that would require a catversion
bump.
Also, in pg14 only, I keep a struct member that was added to
PgStat_TabStatEntry to avoid breaking compatibility with existing stat
files.
Backpatch to 14.
Discussion: https://postgr.es/m/20210722205458.f2bug3z6qzxzpx2s@alap3.anarazel.de
Like the ARM case, just use gcc's __sync_lock_test_and_set();
that will compile into AMOSWAP.W.AQ which does what we need.
At some point it might be worth doing some work on atomic ops
for RISC-V, but this should be enough for a creditable port.
Back-patch to all supported branches, just in case somebody
wants to try them on RISC-V.
Marek Szuba
Discussion: https://postgr.es/m/dea97b6d-f55f-1f6d-9109-504aa7dfa421@gentoo.org
Background workers without shared memory access have been broken on
EXEC_BACKEND / windows builds since shortly after background workers have been
introduced, without that being reported. Clearly they are not commonly used.
The problem is that bgworker startup requires to be attached to shared memory
in EXEC_BACKEND child processes. StartBackgroundWorker() detaches from shared
memory for unconnected workers, but at that point we already have initialized
subsystems referencing shared memory.
Fixing this problem is not entirely trivial, so removing the option to not be
connected to shared memory seems the best way forward. In most use cases the
advantages of being connected to shared memory far outweigh the disadvantages.
As there have been no reports about this issue so far, we have decided that it
is not worth trying to address the problem in the back branches.
Per discussion with Alvaro Herrera, Robert Haas and Tom Lane.
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20210802065116.j763tz3vz4egqy3w@alap3.anarazel.de
This fixes a bug in simplehash.h which caused an incorrect size mask to be
used when the hash table grew to SH_MAX_SIZE (2^32). The code was
incorrectly setting the size mask to 0 when the hash tables reached the
maximum possible number of buckets. This would result always trying to
use the 0th bucket causing an infinite loop of trying to grow the hash
table due to there being too many collisions.
Seemingly it's not that common for simplehash tables to ever grow this big
as this bug dates back to v10 and nobody seems to have noticed it before.
However, probably the most likely place that people would notice it would
be doing a large in-memory Hash Aggregate with something close to at least
2^31 groups.
After this fix, the code now works correctly with up to within 98% of 2^32
groups and will fail with the following error when trying to insert any
more items into the hash table:
ERROR: hash table size exceeded
However, the work_mem (or hash_mem_multiplier in newer versions) settings
will generally cause Hash Aggregates to spill to disk long before reaching
that many groups. The minimal test case I did took a work_mem setting of
over 192GB to hit the bug.
simplehash hash tables are used in a few other places such as Bitmap Index
Scans, however, again the size that the hash table can become there is
also limited to work_mem and it would take a relation of around 16TB
(2^31) pages and a very large work_mem setting to hit this. With smaller
work_mem values the table would become lossy and never grow large enough
to hit the problem.
Author: Yura Sokolov
Reviewed-by: David Rowley, Ranier Vilela
Discussion: https://postgr.es/m/b1f7f32737c3438136f64b26f4852b96@postgrespro.ru
Backpatch-through: 10, where simplehash.h was added
If the replacement string doesn't contain \1...\9, then we don't
need sub-match locations, so we can use the REG_NOSUB optimization
here too. There's already a pre-scan of the replacement string
to look for backslashes, so extend that to check for digits, and
refactor to allow that to happen before we compile the regexp.
While at it, try to speed up the pre-scan by using memchr() instead
of a handwritten loop. It's likely that this is lost in the noise
compared to the regexp processing proper, but maybe not. In any
case, this coding is shorter.
Also, add some test cases to improve the poor coverage of
appendStringInfoRegexpSubstr().
Discussion: https://postgr.es/m/3534632.1628536485@sss.pgh.pa.us
Identifying the precise match locations for parenthesized subexpressions
is a fairly expensive task given the way our regexp engine works, both
at regexp compile time (where we must create an optimized NFA for each
parenthesized subexpression) and at runtime (where determining exact
match locations requires laborious search).
Up to now we've made little attempt to optimize this situation. This
patch identifies cases where we know at compile time that we won't
need to know subexpression match locations, and teaches the regexp
compiler to not bother creating per-subexpression regexps for
parenthesis pairs that are not referenced by backrefs elsewhere in
the regexp. (To preserve semantics, we obviously still have to
pin down the match locations of backref references.) Users could
have obtained the same results before this by being careful to
write "non capturing" parentheses wherever possible, but few people
bother with that.
Discussion: https://postgr.es/m/2219936.1628115334@sss.pgh.pa.us
It appears that check_track_commit_timestamp was declared but has never
been defined in our code base. Likely this is just leftover cruft from
a development version of the original patch to add commit timestamps.
Let's just remove the useless declaration. The inclusion of guc.h also
seems surplus to requirements.
Author: Andrey Lepikhov
Discussion: https://postgr.es/m/f49aefb5-edbb-633a-af07-3e777023a94d@postgrespro.ru
As reported by a few OSX buildfarm animals there exist at least one path where
temporary files exist during AtProcExit_Files() processing. As temporary file
cleanup causes pgstat reporting, the assertions added in ee3f8d3d3a caused
failures.
This is not an OSX specific issue, we were just lucky that timing on OSX
reliably triggered the problem. The known way to cause this is a FATAL error
during perform_base_backup() with a MANIFEST used - adding an elog(FATAL)
after InitializeBackupManifest() reliably reproduces the problem in isolation.
The problem is that the temporary file created in InitializeBackupManifest()
is not cleaned up via resource owner cleanup as WalSndResourceCleanup()
currently is only used for non-FATAL errors. That then allows to reach
AtProcExit_Files() with existing temporary files, causing the assertion
failure.
To fix this problem, move temporary file cleanup to a before_shmem_exit() hook
and add assertions ensuring that no temporary files are created before / after
temporary file management has been initialized / shut down. The cleanest way
to do so seems to be to split fd.c initialization into two, one for plain file
access and one for temporary file access.
Right now there's no need to perform further fd.c cleanup during process exit,
so I just renamed AtProcExit_Files() to BeforeShmemExit_Files(). Alternatively
we could perform another pass through the files to check that no temporary
files exist, but the added assertions seem to provide enough protection
against that.
It might turn out that the assertions added in ee3f8d3d3a will cause too much
noise - in that case we'll have to downgrade them to a WARNING, at least
temporarily.
This commit is not necessarily the best approach to address this issue, but it
should resolve the buildfarm failures. We can revise later.
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20210807190131.2bm24acbebl4wl6i@alap3.anarazel.de
For EXEC_BACKEND InitProcess()/InitAuxiliaryProcess() needs to have been
called well before we call BaseInit(), as SubPostmasterMain() needs LWLocks to
work. Having the order of initialization differ between platforms makes it
unnecessarily hard to understand the system and to add initialization points
for new subsystems without a lot of duplication.
To be able to change the order, BaseInit() cannot trigger
CreateSharedMemoryAndSemaphores() anymore - obviously that needs to have
happened before we can call InitProcess(). It seems cleaner to create shared
memory explicitly in single user/bootstrap mode anyway.
After this change the separation of bufmgr initialization into
InitBufferPoolAccess() / InitBufferPoolBackend() is not meaningful anymore so
the latter is removed.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20210802164124.ufo5buo4apl6yuvs@alap3.anarazel.de
Neither is actually initialized as an auxiliary process, so it does not really
make sense to reserve a PGPROC etc for them.
This keeps checker mode implemented by exiting partway through bootstrap
mode. That might be worth changing at some point, perhaps if we ever extend
checker mode to be a more general tool.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/20210802164124.ufo5buo4apl6yuvs@alap3.anarazel.de
After the preceding commits the auxprocess code is independent from
bootstrap.c - so a dedicated file seems less confusing.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/20210802164124.ufo5buo4apl6yuvs@alap3.anarazel.de
There practically was no shared code between the two, once all the ifs are
removed. And it was quite confusing that aux processes weren't actually
started by the call to AuxiliaryProcessMain() in main().
There's more to do, AuxiliaryProcessMain() should move out of bootstrap.c, and
BootstrapModeMain() shouldn't use/be part of AuxProcType.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/20210802164124.ufo5buo4apl6yuvs@alap3.anarazel.de
These have been unrelated since bgwriter and checkpointer were split into two
processes in 806a2aee37. As there several pending patches (shared memory
stats, extending the set of tracked IO / buffer statistics) that are made a
bit more awkward by the grouping, split them. Done separately to make
reviewing easier.
This does *not* change the contents of pg_stat_bgwriter or move fields out of
bgwriter/checkpointer stats that arguably do not belong in either. However
pgstat_fetch_global() was renamed and split into
pgstat_fetch_stat_checkpointer() and pgstat_fetch_stat_bgwriter().
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20210405092914.mmxqe7j56lsjfsej@alap3.anarazel.de
Commit a8fd13cab0 added support for prepared transactions to built-in
logical replication via a new option "two_phase" for a subscription. The
"two_phase" option was not allowed with the existing streaming option.
This commit permits the combination of "streaming" and "two_phase"
subscription options. It extends the pgoutput plugin and the subscriber
side code to add the prepare API for streaming transactions which will
apply the changes accumulated in the spool-file at prepare time.
Author: Peter Smith and Ajin Cherian
Reviewed-by: Vignesh C, Amit Kapila, Greg Nancarrow
Tested-By: Haiying Tang
Discussion: https://postgr.es/m/02DA5F5E-CECE-4D9C-8B4B-418077E2C010@postgrespro.ru
Discussion: https://postgr.es/m/CAMGcDxeqEpWj3fTXwqhSwBdXd2RS9jzwWscO-XbeCfso6ts3+Q@mail.gmail.com
This patch adds new functions regexp_count(), regexp_instr(),
regexp_like(), and regexp_substr(), and extends regexp_replace()
with some new optional arguments. All these functions follow
the definitions used in Oracle, although there are small differences
in the regexp language due to using our own regexp engine -- most
notably, that the default newline-matching behavior is different.
Similar functions appear in DB2 and elsewhere, too. Aside from
easing portability, these functions are easier to use for certain
tasks than our existing regexp_match[es] functions.
Gilles Darold, heavily revised by me
Discussion: https://postgr.es/m/fc160ee0-c843-b024-29bb-97b5da61971f@darold.net
959d00e9d added the ability to make use of an Append node instead of a
MergeAppend when we wanted to perform a scan of a partitioned table and
the required sort order was the same as the partitioned keys and the
partitioned table was defined in such a way that earlier partitions were
guaranteed to only contain lower-order values than later partitions.
However, previously we didn't allow these ordered partition scans for
LIST partitioned table when there were any partitions that allowed
multiple Datums. This was a very cheap check to make and we could likely
have done a little better by checking if there were interleaved
partitions, but at the time we didn't have visibility about which
partitions were pruned, so we still may have disallowed cases where all
interleaved partitions were pruned.
Since 475dbd0b7, we now have knowledge of pruned partitions, we can do a
much better job inside partitions_are_ordered().
Here we pass which partitions survived partition pruning into
partitions_are_ordered() and, for LIST partitioning, have it check to see
if any live partitions exist that are also in the new "interleaved_parts"
field defined in PartitionBoundInfo.
For RANGE partitioning we can relax the code which caused the partitions
to be unordered if a DEFAULT partition existed. Since we now know which
partitions were pruned, partitions_are_ordered() now returns true when the
DEFAULT partition was pruned.
Reviewed-by: Amit Langote, Zhihong Yu
Discussion: https://postgr.es/m/CAApHDvrdoN_sXU52i=QDXe2k3WAo=EVry29r2+Tq2WYcn2xhEA@mail.gmail.com
For partitioned tables with large numbers of partitions where queries are
able to prune all but a very small number of partitions, the time spent in
the planner looping over RelOptInfo.part_rels checking for non-NULL
RelOptInfos could become a large portion of the overall planning time.
Here we add a Bitmapset that records the non-pruned partitions. This
allows us to more efficiently skip the pruned partitions by looping over
the Bitmapset.
This will cause a very slight slow down in cases where no or not many
partitions could be pruned, however, those cases are already slow to plan
anyway and the overhead of looping over the Bitmapset would be
unmeasurable when compared with the other tasks such as path creation for
a large number of partitions.
Reviewed-by: Amit Langote, Zhihong Yu
Discussion: https://postgr.es/m/CAApHDvqnPx6JnUuPwaf5ao38zczrAb9mxt9gj4U1EKFfd4AqLA@mail.gmail.com
Start up the checkpointer and bgwriter during crash recovery (except in
--single mode), as we do for replication. This wasn't done back in
commit cdd46c76 out of caution. Now it seems like a better idea to make
the environment as similar as possible in both cases. There may also be
some performance advantages.
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Aleksander Alekseev <aleksander@timescale.com>
Tested-by: Jakub Wartak <Jakub.Wartak@tomtom.com>
Discussion: https://postgr.es/m/CA%2BhUKGJ8NRsqgkZEnsnRc2MFROBV-jCnacbYvtpptK2A9YYp9Q%40mail.gmail.com
They are used in code that runs both during normal operation and during
WAL replay, and needs to behave differently during replay. Move them to
xlogutils.c, because that's where we have other helper functions used by
redo routines.
Reviewed-by: Andres Freund
Discussion: https://www.postgresql.org/message-id/b3b71061-4919-e882-4857-27e370ab134a%40iki.fi
The logic used to support a change of access method for a table is
similar to changes for tablespace or relation persistence, requiring a
table rewrite with an exclusive lock of the relation changed. Table
rewrites done in ALTER TABLE already go through the table AM layer when
scanning tuples from the old relation and inserting them into the new
one, making this implementation straight-forward.
Note that partitioned tables are not supported as these have no access
methods defined.
Author: Justin Pryzby, Jeff Davis
Reviewed-by: Michael Paquier, Vignesh C
Discussion: https://postgr.es/m/20210228222530.GD20769@telsasoft.com
Formerly, when specifying NUMERIC(precision, scale), the scale had to
be in the range [0, precision], which was per SQL spec. This commit
extends the range of allowed scales to [-1000, 1000], independent of
the precision (whose valid range remains [1, 1000]).
A negative scale implies rounding before the decimal point. For
example, a column might be declared with a scale of -3 to round values
to the nearest thousand. Note that the display scale remains
non-negative, so in this case the display scale will be zero, and all
digits before the decimal point will be displayed.
A scale greater than the precision supports fractional values with
zeros immediately after the decimal point.
Take the opportunity to tidy up the code that packs, unpacks and
validates the contents of a typmod integer, encapsulating it in a
small set of new inline functions.
Bump the catversion because the allowed contents of atttypmod have
changed for numeric columns. This isn't a change that requires a
re-initdb, but negative scale values in the typmod would confuse old
backends.
Dean Rasheed, with additional improvements by Tom Lane. Reviewed by
Tom Lane.
Discussion: https://postgr.es/m/CAEZATCWdNLgpKihmURF8nfofP0RFtAKJ7ktY6GcZOPnMfUoRqA@mail.gmail.com
The point of introducing the hash_mem_multiplier GUC was to let users
reproduce the old behavior of hash aggregation, i.e. that it could use
more than work_mem at need. However, the implementation failed to get
the job done on Win64, where work_mem is clamped to 2GB to protect
various places that calculate memory sizes using "long int". As
written, the same clamp was applied to hash_mem. This resulted in
severe performance regressions for queries requiring a bit more than
2GB for hash aggregation, as they now spill to disk and there's no
way to stop that.
Getting rid of the work_mem restriction seems like a good idea, but
it's a big job and could not conceivably be back-patched. However,
there's only a fairly small number of places that are concerned with
the hash_mem value, and it turns out to be possible to remove the
restriction there without too much code churn or any ABI breaks.
So, let's do that for now to fix the regression, and leave the
larger task for another day.
This patch does introduce a bit more infrastructure that should help
with the larger task, namely pg_bitutils.h support for working with
size_t values.
Per gripe from Laurent Hasson. Back-patch to v13 where the
behavior change came in.
Discussion: https://postgr.es/m/997817.1627074924@sss.pgh.pa.us
Discussion: https://postgr.es/m/MN2PR15MB25601E80A9B6D1BA6F592B1985E39@MN2PR15MB2560.namprd15.prod.outlook.com
Recently-added references to ParseState weren't covered by #include
references, creating unwanted ordering dependencies for users of
these headers.
Oversight in commit 2bfb50b3d. Per headerscheck/cpluspluscheck.
Most of the integer options for command-line binaries now make use of a
single routine able to do the job, fixing issues with the detection of
sloppy values caused for example by the use of atoi(), that fails on
strings beginning with numerical characters with junk trailing
characters.
This commit cuts down the number of strings requiring translation by 26
per my count, switching the code to have two error types for invalid and
out-of-range values instead.
Much more could be done here, with float or even int64 options, but
int32 was the most appealing case as it is possible to rely on strtol()
to do the job reliably. Note that there are some exceptions for now,
like pg_ctl or pg_upgrade that use their own logging logic. A couple of
negative TAP tests required some adjustments for the new errors
generated.
pg_dump and pg_restore tracked the maximum number of parallel jobs
within the option parsing. The code is refactored a bit to track that
in the code dedicated to parallelism instead.
Author: Kyotaro Horiguchi, Michael Paquier
Reviewed-by: David Rowley, Álvaro Herrera
Discussion: https://postgr.es/m/CALj2ACXqdG9WhqVoJ9zYf-iZt7sgK7Szv5USs=he6NnWQ2ofTA@mail.gmail.com
Datum sorts can be significantly faster than tuple sorts, especially when
the data type being sorted is a pass-by-value type. Something in the
region of 50-70% performance improvements appear to be possible.
Just in case there's any confusion; the Datum sort is only used when the
targetlist of the Sort node contains a single column, not when there's a
single column in the sort key and multiple items in the target list.
Author: Ronan Dunklau
Reviewed-by: James Coleman, David Rowley, Ranier Vilela, Hou Zhijie
Tested-by: John Naylor
Discussion: https://postgr.es/m/3177670.itZtoPt7T5@aivenronan
Macs don't understand O_DIRECT, but they can disable caching with a
separate fcntl() call. Extend the file opening functions in fd.c to
handle this for us if the caller passes in PG_O_DIRECT.
For now, this affects only WAL data and even then only if you set:
max_wal_senders=0
wal_level=minimal
This is not expected to be very useful on its own, but later proposed
patches will make greater use of direct I/O, and it'll be useful for
testing if developers on Macs can see the effects.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA%2BhUKG%2BADiyyHe0cun2wfT%2BSVnFVqNYPxoO6J9zcZkVO7%2BNGig%40mail.gmail.com
It has been spotted that multiranges lack of ability to decompose them into
individual ranges. Subscription and proper expanded object representation
require substantial work, and it's too late for v14. This commit
provides the implementation of unnest(multirange), which is quite trivial.
unnest(multirange) is defined as a polymorphic procedure.
Catversion is bumped.
Reported-by: Jonathan S. Katz
Discussion: https://postgr.es/m/flat/60258efe-bd7e-4886-82e1-196e0cac5433%40postgresql.org
Author: Alexander Korotkov
Reviewed-by: Justin Pryzby, Jonathan S. Katz, Zhihong Yu, Tom Lane
Reviewed-by: Alvaro Herrera
When triggers are cloned from partitioned tables to their partitions,
the 'tgenabled' flag (origin/replica/always/disable) was not propagated.
Make it so that the flag on the trigger on partition is initially set to
the same value as on the partitioned table.
Add a test case to verify the behavior.
Backpatch to 11, where this appeared in commit 86f575948c.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reported-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/20200930223450.GA14848@telsasoft.com
When some slots are invalidated due to the max_slot_wal_keep_size limit,
the old segment horizon should move forward to stay within the limit.
However, in commit c655077639 we forgot to call KeepLogSeg again to
recompute the horizon after invalidating replication slots. In cases
where other slots remained, the limits would be recomputed eventually
for other reasons, but if all slots were invalidated, the limits would
not move at all afterwards. Repair.
Backpatch to 13 where the feature was introduced.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reported-by: Marcin Krupowicz <mk@071.ovh>
Discussion: https://postgr.es/m/17103-004130e8f27782c9@postgresql.org
As of v14, pg_depend contains almost 7000 "pin" entries recording
the OIDs of built-in objects. This is a fair amount of bloat for
every database, and it adds time to pg_depend lookups as well as
initdb. We can get rid of all of those entries in favor of an OID
range check, i.e. "OIDs below FirstUnpinnedObjectId are pinned".
(template1 and the public schema are exceptions. Those exceptions
are now wired into IsPinnedObject() instead of initdb's code for
filling pg_depend, but it's the same amount of cruft either way.)
The contents of pg_shdepend are modified likewise.
Discussion: https://postgr.es/m/3737988.1618451008@sss.pgh.pa.us
This commit fixes the description of a couple of multirange operators and
oprjoin for another multirange operator. The change of oprjoin is more
cosmetic since both old and new functions return the same constant.
These cosmetic changes don't worth catalog incompatibility between 14beta2
and 14beta3. So, catversion isn't bumped.
Discussion: https://postgr.es/m/CAPpHfdv9OZEuZDqOQoUKpXhq%3Dmc-qa4gKCPmcgG5Vvesu7%3Ds1w%40mail.gmail.com
Backpatch-throgh: 14
When reporting "conflicting or redundant options" errors, try to
ensure that errposition() is used, to help the user identify the
offending option.
Formerly, errposition() was invoked in less than 60% of cases. This
patch raises that to over 90%, but there remain a few places where the
ParseState is not readily available. Using errdetail() might improve
the error in such cases, but that is left as a task for the future.
Additionally, since this error is thrown from over 100 places in the
codebase, introduce a dedicated function to throw it, reducing code
duplication.
Extracted from a slightly larger patch by Vignesh C. Reviewed by
Bharath Rupireddy, Alvaro Herrera, Dilip Kumar, Hou Zhijie, Peter
Smith, Daniel Gustafsson, Julien Rouhaud and me.
Discussion: https://postgr.es/m/CALDaNm33FFSS5tVyvmkoK2cCMuDVxcui=gFrjti9ROfynqSAGA@mail.gmail.com
Build farm animals running ancient HPUX and Solaris have a non-standard
sigwait() from draft versions of POSIX, so they didn't like commit
7c09d279. To avoid the problem in general, only try to use sigwait() if
it's declared by <signal.h> and matches the expected declaration. To
select the modern declaration on Solaris (even in non-threaded
programs), move -D_POSIX_PTHREAD_SEMANTICS into the right place to
affect all translation units.
Also fix the error checking. Modern sigwait() doesn't set errno.
Thanks to Tom Lane for help with this.
Discussion: https://postgr.es/m/3187588.1626136248%40sss.pgh.pa.us
Commit 0563a3a8b changed how partition constraints were generated such
that this function no longer computes the mapping of parent attnos to
child attnos.
This is an external function that extensions could use, so this is
potentially a breaking change. No external callers are known, however,
and this will make it simpler to write such callers in the future.
Author: Hou Zhijie
Reviewed-by: David Rowley, Michael Paquier, Soumyadeep Chakraborty
Discussion: https://www.postgresql.org/message-id/flat/OS0PR01MB5716A75A45BE46101A1B489894379@OS0PR01MB5716.jpnprd01.prod.outlook.com
To add support for streaming transactions at prepare time into the
built-in logical replication, we need to do the following things:
* Modify the output plugin (pgoutput) to implement the new two-phase API
callbacks, by leveraging the extended replication protocol.
* Modify the replication apply worker, to properly handle two-phase
transactions by replaying them on prepare.
* Add a new SUBSCRIPTION option "two_phase" to allow users to enable
two-phase transactions. We enable the two_phase once the initial data sync
is over.
We however must explicitly disable replication of two-phase transactions
during replication slot creation, even if the plugin supports it. We
don't need to replicate the changes accumulated during this phase,
and moreover, we don't have a replication connection open so we don't know
where to send the data anyway.
The streaming option is not allowed with this new two_phase option. This
can be done as a separate patch.
We don't allow to toggle two_phase option of a subscription because it can
lead to an inconsistent replica. For the same reason, we don't allow to
refresh the publication once the two_phase is enabled for a subscription
unless copy_data option is false.
Author: Peter Smith, Ajin Cherian and Amit Kapila based on previous work by Nikhil Sontakke and Stas Kelvich
Reviewed-by: Amit Kapila, Sawada Masahiko, Vignesh C, Dilip Kumar, Takamichi Osumi, Greg Nancarrow
Tested-By: Haiying Tang
Discussion: https://postgr.es/m/02DA5F5E-CECE-4D9C-8B4B-418077E2C010@postgrespro.ru
Discussion: https://postgr.es/m/CAA4eK1+opiV4aFTmWWUF9h_32=HfPOW9vZASHarT0UA5oBrtGw@mail.gmail.com
"Result Cache" was never a great name for this node, but nobody managed
to come up with another name that anyone liked enough. That was until
David Johnston mentioned "Node Memoization", which Tom Lane revised to
just "Memoize". People seem to like "Memoize", so let's do the rename.
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/20210708165145.GG1176@momjian.us
Backpatch-through: 14, where Result Cache was introduced
Apple's mechanism for dealing with functions that are available
in only some OS versions confuses AC_CHECK_FUNCS, and therefore
AC_REPLACE_FUNCS. We can use AC_CHECK_DECLS instead, so long as
we enable -Werror=unguarded-availability-new. This allows people
compiling for macOS to control whether or not preadv/pwritev are
used by setting MACOSX_DEPLOYMENT_TARGET, rather than supplying
a back-rev SDK. (Of course, the latter still works, too.)
James Hilliard
Discussion: https://postgr.es/m/20210122193230.25295-1-james.hilliard1@gmail.com
The idea behind this patch is to design out bugs like the one fixed
by commit 9d523119f. Previously, once one did RelationOpenSmgr(rel),
it was considered okay to access rel->rd_smgr directly for some
not-very-clear interval. But since that pointer will be cleared by
relcache flushes, we had bugs arising from overreliance on a previous
RelationOpenSmgr call still being effective.
Now, very little code except that in rel.h and relcache.c should ever
touch the rd_smgr field directly. The normal coding rule is to use
RelationGetSmgr(rel) and not expect the result to be valid for longer
than one smgr function call. There are a couple of places where using
the function every single time seemed like overkill, but they are now
annotated with large warning comments.
Amul Sul, after an idea of mine.
Discussion: https://postgr.es/m/CANiYTQsU7yMFpQYnv=BrcRVqK_3U3mtAzAsJCaqtzsDHfsUbdQ@mail.gmail.com
The separate libldap_r is gone and libldap itself is now always
thread-safe. Unfortunately there seems no easy way to tell by
inspection whether libldap is thread-safe, so we have to take
it on faith that libldap is thread-safe if there's no libldap_r.
That should be okay, as it appears that libldap_r was a standard
part of the installation going back at least 20 years.
Report and patch by Adrian Ho. Back-patch to all supported
branches, since people might try to build any of them with
a newer OpenLDAP.
Discussion: https://postgr.es/m/17083-a19190d9591946a7@postgresql.org
Most error messages about a relkind that was not supported or
appropriate for the command was of the pattern
"relation \"%s\" is not a table, foreign table, or materialized view"
This style can become verbose and tedious to maintain. Moreover, it's
not very helpful: If I'm trying to create a comment on a TOAST table,
which is not supported, then the information that I could have created
a comment on a materialized view is pointless.
Instead, write the primary error message shorter and saying more
directly that what was attempted is not possible. Then, in the detail
message, explain that the operation is not supported for the relkind
the object was. To simplify that, add a new function
errdetail_relkind_not_supported() that does this.
In passing, make use of RELKIND_HAS_STORAGE() where appropriate,
instead of listing out the relkinds individually.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://www.postgresql.org/message-id/flat/dc35a398-37d0-75ce-07ea-1dd71d98f8ec@2ndquadrant.com
Similar to 50e17ad28, which allowed hash tables to be used for IN clauses
with a set of constants, here we add the same feature for NOT IN clauses.
NOT IN evaluates the same as: WHERE a <> v1 AND a <> v2 AND a <> v3.
Obviously, if we're using a hash table we must be exactly equivalent to
that and return the same result taking into account that either side of
the condition could contain a NULL. This requires a little bit of
special handling to make work with the hash table version.
When processing NOT IN, the ScalarArrayOpExpr's operator will be the <>
operator. To be able to build and lookup a hash table we must use the
<>'s negator operator. The planner checks if that exists and is hashable
and sets the relevant fields in ScalarArrayOpExpr to instruct the executor
to use hashing.
Author: David Rowley, James Coleman
Reviewed-by: James Coleman, Zhihong Yu
Discussion: https://postgr.es/m/CAApHDvoF1mum_FRk6D621edcB6KSHBi2+GAgWmioj5AhOu2vwQ@mail.gmail.com
The code of SCRAM and SASL have been tightly linked together since SCRAM
exists in the core code, making hard to apprehend the addition of new
SASL mechanisms, but these are by design different facilities, with
SCRAM being an option for SASL. This refactors the code related to both
so as the backend and the frontend use a set of callbacks for SASL
mechanisms, documenting while on it what is expected by anybody adding a
new SASL mechanism.
The separation between both layers is neat, using two sets of callbacks
for the frontend and the backend to mark the frontier between both
facilities. The shape of the callbacks is now directly inspired from
the routines used by SCRAM, so the code change is straight-forward, and
the SASL code is moved into its own set of files. These will likely
change depending on how and if new SASL mechanisms get added in the
future.
Author: Jacob Champion
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/3d2a6f5d50e741117d6baf83eb67ebf1a8a35a11.camel@vmware.com
Previously, all CustomScan providers had to support projections,
but there may be cases where this is inconvenient. Add a flag
bit to say if it's supported.
Important item for the release notes: this is non-backwards-compatible
since the default is now to assume that CustomScan providers can't
project, instead of assuming that they can. It's fail-soft, but could
result in visible performance penalties due to adding unnecessary
Result nodes.
Sven Klemm, reviewed by Aleksander Alekseev; some cosmetic fiddling
by me.
Discussion: https://postgr.es/m/CAMCrgp1kyakOz6c8aKhNDJXjhQ1dEjEnp+6KNT3KxPrjNtsrDg@mail.gmail.com
Here we alter the code that calls build_pertrans_for_aggref() so that the
function no longer needs to special-case whether it's dealing with an
aggtransfn or an aggcombinefn. This allows us to reuse the
build_aggregate_transfn_expr() function and just get rid of the
build_aggregate_combinefn_expr() completely.
All of the special case code that was in build_pertrans_for_aggref() has
been moved up to the calling functions.
This saves about a dozen lines of code in nodeAgg.c and a few dozen more
in parse_agg.c
Also, rename a few variables in nodeAgg.c to try to make it more clear
that we're working with either a aggtransfn or an aggcombinefn. Some of
the old names would have you believe that we were always working with an
aggtransfn.
Discussion: https://postgr.es/m/CAApHDvptMQ9FmF0D67zC_w88yVnoNVR2+kkOQGUrCmdxWxLULQ@mail.gmail.com
The existing code tried to do syscache lookups in an already-failed
transaction, which is problematic to say the least. After some
consideration of alternatives, the best fix seems to be to just drop
type names from the error message altogether. The table and column
names seem like sufficient localization. If the user is unsure what
types are involved, she can check the local and remote table
definitions.
Having done that, we can also discard the LogicalRepTypMap hash
table, which had no other use. Arguably, LOGICAL_REP_MSG_TYPE
replication messages are now obsolete as well; but we should
probably keep them in case some other use emerges. (The complexity
of removing something from the replication protocol would likely
outweigh any savings anyhow.)
Masahiko Sawada and Bharath Rupireddy, per complaint from Andres
Freund. Back-patch to v10 where this code originated.
Discussion: https://postgr.es/m/20210106020229.ne5xnuu6wlondjpe@alap3.anarazel.de
This has the advantage to make a process more responsive when the
postmaster dies, even if the wait time was rather limited as there was
only a 50ms timeout here. Another advantage of this change is for
monitoring, as we gain a new wait event for the end-of-vacuum
truncation.
Author: Bharath Rupireddy
Reviewed-by: Aleksander Alekseev, Thomas Munro, Michael Paquier
Discussion: https://postgr.es/m/CALj2ACU4AdPCq6NLfcA-ZGwX7pPCK5FgEj-CAU0xCKzkASSy_A@mail.gmail.com
The logic is implemented so as there can be a choice in the compression
used when building a WAL record, and an extra per-record bit is used to
track down if a block is compressed with PGLZ, LZ4 or nothing.
wal_compression, the existing parameter, is changed to an enum with
support for the following backward-compatible values:
- "off", the default, to not use compression.
- "pglz" or "on", to compress FPWs with PGLZ.
- "lz4", the new mode, to compress FPWs with LZ4.
Benchmarking has showed that LZ4 outclasses easily PGLZ. ZSTD would be
also an interesting choice, but going just with LZ4 for now makes the
patch minimalistic as toast compression is already able to use LZ4, so
there is no need to worry about any build-related needs for this
implementation.
Author: Andrey Borodin, Justin Pryzby
Reviewed-by: Dilip Kumar, Michael Paquier
Discussion: https://postgr.es/m/3037310D-ECB7-4BF1-AF20-01C10BB33A33@yandex-team.ru
Before a restartpoint finishes PreallocXlogFiles(), a startup process
KeepFileRestoredFromArchive() call can unlink the preallocated segment.
If a CHECKPOINT sql command had elicited the restartpoint experiencing
the race condition, that sql command failed. Moreover, the restartpoint
omitted its log_checkpoints message and some inessential resource
reclamation. Prevent the ERROR by skipping open() of the segment.
Since these consequences are so minor, no back-patch.
Discussion: https://postgr.es/m/20210202151416.GB3304930@rfd.leadboat.com
Only initdb used it. initdb refuses to operate on a non-empty directory
and generally does not cope with pre-existing files of other kinds.
Hence, use the opportunity to simplify.
Discussion: https://postgr.es/m/20210202151416.GB3304930@rfd.leadboat.com
As we do for other attributes of the public schema, omit the COMMENT
command when its payload would match what initdb had installed. For
dumps that do carry this new COMMENT command, non-superusers restoring
them are likely to get an error.
Reviewed by Asif Rehman.
Discussion: https://postgr.es/m/ab48a34c-60f6-e388-502a-3e5fe46a2dae@postgresfriends.org
Generalize the INDEX_CLEANUP VACUUM parameter (and the corresponding
reloption): make it into a ternary style boolean parameter. It now
exposes a third option, "auto". The "auto" option (which is now the
default) enables the "bypass index vacuuming" optimization added by
commit 1e55e7d1.
"VACUUM (INDEX_CLEANUP TRUE)" is redefined to once again make VACUUM
simply do any required index vacuuming, regardless of how few dead
tuples are encountered during the first scan of the target heap relation
(unless there are exactly zero). This gives users a way of opting out
of the "bypass index vacuuming" optimization, if for whatever reason
that proves necessary. It is also expected to be used by PostgreSQL
developers as a testing option from time to time.
"VACUUM (INDEX_CLEANUP FALSE)" does the same thing as it always has: it
forcibly disables both index vacuuming and index cleanup. It's not
expected to be used much in PostgreSQL 14. The failsafe mechanism added
by commit 1e55e7d1 addresses the same problem in a simpler way.
INDEX_CLEANUP can now be thought of as a testing and compatibility
option.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-By: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/CAH2-WznrBoCST4_Gxh_G9hA8NzGUbeBGnOUC8FcXcrhqsv6OHQ@mail.gmail.com
In the "simple Query" code path, it's fine for parse analysis or
execution of a utility statement to scribble on the statement's node
tree, since that'll just be thrown away afterwards. However it's
not fine if the node tree is in the plan cache, as then it'd be
corrupted for subsequent executions. Up to now we've dealt with
that by having individual utility-statement functions apply
copyObject() if they were going to modify the tree. But that's
prone to errors of omission. Bug #17053 from Charles Samborski
shows that CREATE/ALTER DOMAIN didn't get this memo, and can
crash if executed repeatedly from plan cache.
In the back branches, we'll just apply a narrow band-aid for that,
but in HEAD it seems prudent to have a more principled fix that
will close off the possibility of other similar bugs in future.
Hence, let's hoist the responsibility for doing copyObject up into
ProcessUtility from its children, thus ensuring that it happens for
all utility statement types.
Also, modify ProcessUtility's API so that its callers can tell it
whether a copy step is necessary. It turns out that in all cases,
the immediate caller knows whether the node tree is transient, so
this doesn't involve a huge amount of code thrashing. In this way,
while we lose a little bit in the execute-from-cache code path due
to sometimes copying node trees that wouldn't be mutated anyway,
we gain something in the simple-Query code path by not copying
throwaway node trees. Statements that are complex enough to be
expensive to copy are almost certainly ones that would have to be
copied anyway, so the loss in the cache code path shouldn't be much.
(Note that this whole problem applies only to utility statements.
Optimizable statements don't have the issue because we long ago made
the executor treat Plan trees as read-only. Perhaps someday we will
make utility statement execution act likewise, but I'm not holding
my breath.)
Discussion: https://postgr.es/m/931771.1623893989@sss.pgh.pa.us
Discussion: https://postgr.es/m/17053-3ca3f501bbc212b4@postgresql.org
It has been spotted that multiranges lack of ability to decompose them into
individual ranges. Subscription and proper expanded object representation
require substantial work, and it's too late for v14. This commit
provides the implementation of unnest(multirange) and cast multirange as
an array of ranges, which is quite trivial.
unnest(multirange) is defined as a polymorphic procedure. The catalog
description of the cast underlying procedure is duplicated for each multirange
type because we don't have anyrangearray polymorphic type to use here.
Catversion is bumped.
Reported-by: Jonathan S. Katz
Discussion: https://postgr.es/m/flat/60258efe-bd7e-4886-82e1-196e0cac5433%40postgresql.org
Author: Alexander Korotkov
Reviewed-by: Justin Pryzby, Jonathan S. Katz, Zhihong Yu
During decoding for speculative inserts, we were relying for cleaning
toast hash on confirmation records or next change records. But that
could lead to multiple problems (a) memory leak if there is neither a
confirmation record nor any other record after toast insertion for a
speculative insert in the transaction, (b) error and assertion failures
if the next operation is not an insert/update on the same table.
The fix is to start queuing spec abort change and clean up toast hash
and change record during its processing. Currently, we are queuing the
spec aborts for both toast and main table even though we perform cleanup
while processing the main table's spec abort record. Later, if we have a
way to distinguish between the spec abort record of toast and the main
table, we can avoid queuing the change for spec aborts of toast tables.
Reported-by: Ashutosh Bapat
Author: Dilip Kumar
Reviewed-by: Amit Kapila
Backpatch-through: 9.6, where it was introduced
Discussion: https://postgr.es/m/CAExHW5sPKF-Oovx_qZe4p5oM6Dvof7_P+XgsNAViug15Fm99jA@mail.gmail.com
It was unable to wait on a backend that had already left the procarray.
Users tolerant of that limitation can poll pg_stat_activity. Other
users can employ the "timeout" argument of pg_terminate_backend().
Reviewed by Bharath Rupireddy.
Discussion: https://postgr.es/m/20210605013236.GA208701@rfd.leadboat.com
Revert the pg_description entry to its v13 form, since those messages
usually remain shorter and don't discuss individual parameters. No
catversion bump, since pg_description content does not impair backend
compatibility or application compatibility.
Justin Pryzby
Discussion: https://postgr.es/m/20210612182743.GY16435@telsasoft.com
Commit b663a41363 introduced bulk inserts for FDW, but the handling of
tuple slots turned out to be problematic for two reasons. Firstly, the
slots were re-created for each individual batch. Secondly, all slots
referenced the same tuple descriptor - with reasonably small batches
this is not an issue, but with large batches this triggers O(N^2)
behavior in the resource owner code.
These two issues work against each other - to reduce the number of times
a slot has to be created/dropped, larger batches are needed. However,
the larger the batch, the more expensive the resource owner gets. For
practical batch sizes (100 - 1000) this would not be a big problem, as
the benefits (latency savings) greatly exceed the resource owner costs.
But for extremely large batches it might be much worse, possibly even
losing with non-batching mode.
Fixed by initializing tuple slots only once (and reusing them across
batches) and by using a new tuple descriptor copy for each slot.
Discussion: https://postgr.es/m/ebbbcc7d-4286-8c28-0272-61b4753af761%40enterprisedb.com
Commit 2453ea142 redefined pg_proc.proargtypes to include the types of
OUT parameters, for procedures only. While that had some advantages
for implementing the SQL-spec behavior of DROP PROCEDURE, it was pretty
disastrous from a number of other perspectives. Notably, since the
primary key of pg_proc is name + proargtypes, this made it possible to
have multiple procedures with identical names + input arguments and
differing output argument types. That would make it impossible to call
any one of the procedures by writing just NULL (or "?", or any other
data-type-free notation) for the output argument(s). The change also
seems likely to cause grave confusion for client applications that
examine pg_proc and expect the traditional definition of proargtypes.
Hence, revert the definition of proargtypes to what it was, and
undo a number of complications that had been added to support that.
To support the SQL-spec behavior of DROP PROCEDURE, when there are
no argmode markers in the command's parameter list, we perform the
lookup both ways (that is, matching against both proargtypes and
proallargtypes), succeeding if we get just one unique match.
In principle this could result in ambiguous-function failures
that would not happen when using only one of the two rules.
However, overloading of procedure names is thought to be a pretty
rare usage, so this shouldn't cause many problems in practice.
Postgres-specific code such as pg_dump can defend against any
possibility of such failures by being careful to specify argmodes
for all procedure arguments.
This also fixes a few other bugs in the area of CALL statements
with named parameters, and improves the documentation a little.
catversion bump forced because the representation of procedures
with OUT arguments changes.
Discussion: https://postgr.es/m/3742981.1621533210@sss.pgh.pa.us
An incorrectly-encoded multibyte character near the end of a string
could cause various processing loops to run past the string's
terminating NUL, with results ranging from no detectable issue to
a program crash, depending on what happens to be in the following
memory.
This isn't an issue in the server, because we take care to verify
the encoding of strings before doing any interesting processing
on them. However, that lack of care leaked into client-side code
which shouldn't assume that anyone has validated the encoding of
its input.
Although this is certainly a bug worth fixing, the PG security team
elected not to regard it as a security issue, primarily because
any untrusted text should be sanitized by PQescapeLiteral or
the like before being incorporated into a SQL or psql command.
(If an app fails to do so, the same technique can be used to
cause SQL injection, with probably much more dire consequences
than a mere client-program crash.) Those functions were already
made proof against this class of problem, cf CVE-2006-2313.
To fix, invent PQmblenBounded() which is like PQmblen() except it
won't return more than the number of bytes remaining in the string.
In HEAD we can make this a new libpq function, as PQmblen() is.
It seems imprudent to change libpq's API in stable branches though,
so in the back branches define PQmblenBounded as a macro in the files
that need it. (Note that just changing PQmblen's behavior would not
be a good idea; notably, it would completely break the escaping
functions' defense against this exact problem. So we just want a
version for those callers that don't have any better way of handling
this issue.)
Per private report from houjingyi. Back-patch to all supported branches.
Commit 19890a064e added the option to enable two_phase commits via
pg_create_logical_replication_slot but didn't extend the support of same
in replication protocol. However, by mistake, it added the two_phase
variable in CreateReplicationSlotCmd which is required only when we extend
the replication protocol.
Reported-by: Jeff Davis
Author: Ajin Cherian
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/64b9f783c6e125f18f88fbc0c0234e34e71d8639.camel@j-davis.com
The documented intent is for all columns except subconninfo to be
publicly readable. However, this has been overlooked twice.
subsynccommit has never been readable since it was introduced,
nor has the oid column (which is important for joining).
Given the lack of previous complaints, it's not clear that it's
worth doing anything about this in the back branches. But there's
still time to fix it inexpensively for v14.
Per report from Israel Barth (via Euler Taveira).
Patch by Euler Taveira, possibly-vain comment updates by me.
Discussion: https://postgr.es/m/b8f7c17c-0041-46b6-acfe-2d1f5a985ab4@www.fastmail.com
The reference here to different physical column numbers in inherited
UPDATE/DELETE plans is obsolete as of 86dc90056; remove it. Also
rework the text about inheritance cases to make it clearer.
Commit ab596105b increased FirstBootstrapObjectId from 12000 to 13000,
but we've had some push-back about that. It's worrisome to reduce the
daylight between there and FirstNormalObjectId, because the number of
OIDs consumed during initdb for collation objects is hard to predict.
We can improve the situation by abandoning the assumption that these
OIDs must be globally unique. It should be sufficient for them to be
unique per-catalog. (Any code that's unhappy about that is broken
anyway, since no more than per-catalog uniqueness can be guaranteed
once the OID counter wraps around.) With that change, the largest OID
assigned during genbki.pl (starting from a base of 10000) is a bit
under 11000. This allows reverting FirstBootstrapObjectId to 12000
with reasonable confidence that that will be sufficient for many years
to come.
We are not, at this time, abandoning the expectation that
hand-assigned OIDs (below 10000) are globally unique. Someday that'll
likely be necessary, but the need seems years away still.
This is late for v14, but it seems worth doing it now so that
downstream software doesn't have to deal with the consequences of
a change in FirstBootstrapObjectId. In any case, we already
bought into forcing an initdb for beta2, so another catversion
bump won't hurt.
Discussion: https://postgr.es/m/1665197.1622065382@sss.pgh.pa.us
Redefine '\0' (InvalidCompressionMethod) as meaning "if we need to
compress, use the current setting of default_toast_compression".
This allows '\0' to be a suitable default choice regardless of
datatype, greatly simplifying code paths that initialize tupledescs
and the like. It seems like a more user-friendly approach as well,
because now the default compression choice doesn't migrate into table
definitions, meaning that changing default_toast_compression is
usually sufficient to flip an installation's behavior; one needn't
tediously issue per-column ALTER SET COMPRESSION commands.
Along the way, fix a few minor bugs and documentation issues
with the per-column-compression feature. Adopt more robust
APIs for SetIndexStorageProperties and GetAttributeCompression.
Bump catversion because typical contents of attcompression will now
be different. We could get away without doing that, but it seems
better to ensure v14 installations all agree on this. (We already
forced initdb for beta2, anyway.)
Discussion: https://postgr.es/m/626613.1621787110@sss.pgh.pa.us
While decoding the multi-insert WAL we can't clean the toast untill we get
the last insert of that WAL record. Now if we stream the changes before we
get the last change, the memory for toast chunks won't be released and we
expect the txn to have streamed all changes after streaming. This
restriction is mainly to ensure the correctness of streamed transactions
and it doesn't seem worth uplifting such a restriction just to allow this
case because anyway we will stream the transaction once such an insert is
complete.
Previously we were using two different flags (one for toast tuples and
another for speculative inserts) to indicate partial changes. Now instead
we replaced both of them with a single flag to indicate partial changes.
Reported-by: Pavan Deolasee
Author: Dilip Kumar
Reviewed-by: Pavan Deolasee, Amit Kapila
Discussion: https://postgr.es/m/CABOikdN-_858zojYN-2tNcHiVTw-nhxPwoQS4quExeweQfG1Ug@mail.gmail.com
Now that attcompression is just a char, there's a lot of wasted
padding space after it. Move it into the group of char-wide
columns to save a net of 4 bytes per pg_attribute entry. While
we're at it, swap the order of attstorage and attalign to make for
a more logical grouping of these columns.
Also re-order actions in related code to match the new field ordering.
This patch also fixes one outright bug: equalTupleDescs() failed to
compare attcompression. That could, for example, cause relcache
reload to fail to adopt a new value following a change.
Michael Paquier and Tom Lane, per a gripe from Andres Freund.
Discussion: https://postgr.es/m/20210517204803.iyk5wwvwgtjcmc5w@alap3.anarazel.de
COMMIT/ROLLBACK necessarily destroys all snapshots within the session.
The original implementation of intra-procedure transactions just
cavalierly did that, ignoring the fact that this left us executing in
a rather different environment than normal. In particular, it turns
out that handling of toasted datums depends rather critically on there
being an outer ActiveSnapshot: otherwise, when SPI or the core
executor pop whatever snapshot they used and return, it's unsafe to
dereference any toasted datums that may appear in the query result.
It's possible to demonstrate "no known snapshots" and "missing chunk
number N for toast value" errors as a result of this oversight.
Historically this outer snapshot has been held by the Portal code,
and that seems like a good plan to preserve. So add infrastructure
to pquery.c to allow re-establishing the Portal-owned snapshot if it's
not there anymore, and add enough bookkeeping support that we can tell
whether it is or not.
We can't, however, just re-establish the Portal snapshot as part of
COMMIT/ROLLBACK. As in normal transaction start, acquiring the first
snapshot should wait until after SET and LOCK commands. Hence, teach
spi.c about doing this at the right time. (Note that this patch
doesn't fix the problem for any PLs that try to run intra-procedure
transactions without using SPI to execute SQL commands.)
This makes SPI's no_snapshots parameter rather a misnomer, so in HEAD,
rename that to allow_nonatomic.
replication/logical/worker.c also needs some fixes, because it wasn't
careful to hold a snapshot open around AFTER trigger execution.
That code doesn't use a Portal, which I suspect someday we're gonna
have to fix. But for now, just rearrange the order of operations.
This includes back-patching the recent addition of finish_estate()
to centralize the cleanup logic there.
This also back-patches commit 2ecfeda3e into v13, to improve the
test coverage for worker.c (it was that test that exposed that
worker.c's snapshot management is wrong).
Per bug #15990 from Andreas Wicht. Back-patch to v11 where
intra-procedure COMMIT was added.
Discussion: https://postgr.es/m/15990-eee2ac466b11293d@postgresql.org
1) Previously there were both pgstat_send_wal() and pgstat_report_wal()
in order to send WAL activity to the stats collector. With the former being
used by wal writer, the latter by most other processes. They were a bit
redundant and so this commit merges them into pgstat_send_wal() to
simplify the code.
2) Previously WAL global statistics counters were calculated and then
compared with zero-filled buffer in order to determine whether any WAL
activity has happened since the last submission. These calculation and
comparison were not cheap. This was regularly exercised even in read-only
workloads. This commit fixes the issue by making some WAL activity
counters directly be checked to determine if there's WAL activity stats
to send.
3) Previously pgstat_report_stat() did not check if there's WAL activity
stats to send as part of the "Don't expend a clock check if nothing to do"
check at the top. It's probably rare to have pending WAL stats without
also passing one of the other conditions, but for safely this commit
changes pgstat_report_stats() so that it checks also some WAL activity
counters at the top.
This commit also adds the comments about the design of WAL stats.
Reported-by: Andres Freund
Author: Masahiro Ikeda
Reviewed-by: Kyotaro Horiguchi, Atsushi Torikoshi, Andres Freund, Fujii Masao
Discussion: https://postgr.es/m/20210324232224.vrfiij2rxxwqqjjb@alap3.anarazel.de
Allowing only on/off meant that all either all existing configuration
guides would become obsolete if we disabled it by default, or that we
would have to accept a performance loss in the default config if we
enabled it by default. By allowing 'auto' as a middle ground, the
performance cost is only paid by those who enable pg_stat_statements and
similar modules.
I only edited the release notes to comment-out a paragraph that is now
factually wrong; further edits are probably needed to describe the
related change in more detail.
Author: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/20210513002623.eugftm4nk2lvvks3@nol
Split up CHECK_FOR_INTERRUPTS() to provide an additional macro
INTERRUPTS_PENDING_CONDITION(), which just tests whether an
interrupt is pending without attempting to service it. This is
useful in situations where the caller knows that interrupts are
blocked, and would like to find out if it's worth the trouble
to unblock them.
Also add INTERRUPTS_CAN_BE_PROCESSED(), which indicates whether
CHECK_FOR_INTERRUPTS() can be relied on to clear the pending interrupt.
This commit doesn't actually add any uses of the new macros,
but a follow-on bug fix will do so. Back-patch to all supported
branches to provide infrastructure for that fix.
Alvaro Herrera and Tom Lane
Discussion: https://postgr.es/m/20210513155351.GA7848@alvherre.pgsql
The worker.c global wrconn is only meant to be used by logical apply/
tablesync workers, but there are other variables with the same name. To
reduce future confusion rename the global from "wrconn" to
"LogRepWorkerWalRcvConn".
While this is just cosmetic, it seems better to backpatch it all the way
back to 10 where this code appeared, to avoid future backpatching
issues.
Author: Peter Smith <smithpb2250@gmail.com>
Discussion: https://postgr.es/m/CAHut+Pu7Jv9L2BOEx_Z0UtJxfDevQSAUW2mJqWU+CtmDrEZVAg@mail.gmail.com
Run renumber_oids.pl to move high-numbered OIDs down, as per pre-beta
tasks specified by RELEASE_CHANGES. For reference, the command was
./renumber_oids.pl --first-mapped-oid 8000 --target-oid 6150
Also "make reformat-dat-files".
The only change worthy of note is that pgindent messed up the formatting
of launcher.c's struct LogicalRepWorkerId, which led me to notice that
that struct wasn't used at all anymore, so I just took it out.
EXPLAIN ANALYZE for an async-capable ForeignScan node associated with
postgres_fdw is done just by using instrumentation for ExecProcNode()
called from the node's callbacks, causing the following problems:
1) If the remote table to scan is empty, the node is incorrectly
considered as "never executed" by the command even if the node is
executed, as ExecProcNode() isn't called from the node's callbacks at
all in that case.
2) The command fails to collect timings for things other than
ExecProcNode() done in the node, such as creating a cursor for the
node's remote query.
To fix these problems, add instrumentation for async-capable nodes, and
modify postgres_fdw accordingly.
My oversight in commit 27e1f1456.
While at it, update a comment for the AsyncRequest struct in execnodes.h
and the documentation for the ForeignAsyncRequest API in fdwhandler.sgml
to match the code in ExecAsyncAppendResponse() in nodeAppend.c, and fix
typos in comments in nodeAppend.c.
Per report from Andrey Lepikhov, though I didn't use his patch.
Reviewed-by: Andrey Lepikhov
Discussion: https://postgr.es/m/2eb662bb-105d-fc20-7412-2f027cc3ca72%40postgrespro.ru
Previously long was used as the data type for some counters in BufferUsage
and WalUsage. But long is only four byte, e.g., on Windows, and it's entirely
possible to wrap a four byte counter. For example, emitting more than
four billion WAL records in one transaction isn't actually particularly rare.
To avoid the overflows of those counters, this commit changes the data type
of them from long to int64.
Suggested-by: Andres Freund
Author: Masahiro Ikeda
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/20201221211650.k7b53tcnadrciqjo@alap3.anarazel.de
Discussion: https://postgr.es/m/af0964ac-7080-1984-dc23-513754987716@oss.nttdata.com
It's unusual to have any resjunk columns in an ON CONFLICT ... UPDATE
list, but it can happen when MULTIEXPR_SUBLINK SubPlans are present.
If it happens, the ON CONFLICT UPDATE code path would end up storing
tuples that include the values of the extra resjunk columns. That's
fairly harmless in the short run, but if new columns are added to
the table then the values would become accessible, possibly leading
to malfunctions if they don't match the datatypes of the new columns.
This had escaped notice through a confluence of missing sanity checks,
including
* There's no cross-check that a tuple presented to heap_insert or
heap_update matches the table rowtype. While it's difficult to
check that fully at reasonable cost, we can easily add assertions
that there aren't too many columns.
* The output-column-assignment cases in execExprInterp.c lacked
any sanity checks on the output column numbers, which seems like
an oversight considering there are plenty of assertion checks on
input column numbers. Add assertions there too.
* We failed to apply nodeModifyTable's ExecCheckPlanOutput() to
the ON CONFLICT UPDATE tlist. That wouldn't have caught this
specific error, since that function is chartered to ignore resjunk
columns; but it sure seems like a bad omission now that we've seen
this bug.
In HEAD, the right way to fix this is to make the processing of
ON CONFLICT UPDATE tlists work the same as regular UPDATE tlists
now do, that is don't add "SET x = x" entries, and use
ExecBuildUpdateProjection to evaluate the tlist and combine it with
old values of the not-set columns. This adds a little complication
to ExecBuildUpdateProjection, but allows removal of a comparable
amount of now-dead code from the planner.
In the back branches, the most expedient solution seems to be to
(a) use an output slot for the ON CONFLICT UPDATE projection that
actually matches the target table, and then (b) invent a variant of
ExecBuildProjectionInfo that can be told to not store values resulting
from resjunk columns, so it doesn't try to store into nonexistent
columns of the output slot. (We can't simply ignore the resjunk columns
altogether; they have to be evaluated for MULTIEXPR_SUBLINK to work.)
This works back to v10. In 9.6, projections work much differently and
we can't cheaply give them such an option. The 9.6 version of this
patch works by inserting a JunkFilter when it's necessary to get rid
of resjunk columns.
In addition, v11 and up have the reverse problem when trying to
perform ON CONFLICT UPDATE on a partitioned table. Through a
further oversight, adjust_partition_tlist() discarded resjunk columns
when re-ordering the ON CONFLICT UPDATE tlist to match a partition.
This accidentally prevented the storing-bogus-tuples problem, but
at the cost that MULTIEXPR_SUBLINK cases didn't work, typically
crashing if more than one row has to be updated. Fix by preserving
resjunk columns in that routine. (I failed to resist the temptation
to add more assertions there too, and to do some minor code
beautification.)
Per report from Andres Freund. Back-patch to all supported branches.
Security: CVE-2021-32028
While we were (mostly) careful about ensuring that the dimensions of
arrays aren't large enough to cause integer overflow, the lower bound
values were generally not checked. This allows situations where
lower_bound + dimension overflows an integer. It seems that that's
harmless so far as array reading is concerned, except that array
elements with subscripts notionally exceeding INT_MAX are inaccessible.
However, it confuses various array-assignment logic, resulting in a
potential for memory stomps.
Fix by adding checks that array lower bounds aren't large enough to
cause lower_bound + dimension to overflow. (Note: this results in
disallowing cases where the last subscript position would be exactly
INT_MAX. In principle we could probably allow that, but there's a lot
of code that computes lower_bound + dimension and would need adjustment.
It seems doubtful that it's worth the trouble/risk to allow it.)
Somewhat independently of that, array_set_element() was careless
about possible overflow when checking the subscript of a fixed-length
array, creating a different route to memory stomps. Fix that too.
Security: CVE-2021-32027
This set of commits has some bugs with known fixes, but at this late
stage in the release cycle it seems best to revert and resubmit next
time, along with some new automated test coverage for this whole area.
Commits reverted:
dc88460c: Doc: Review for "Optionally prefetch referenced data in recovery."
1d257577: Optionally prefetch referenced data in recovery.
f003d9f8: Add circular WAL decoding buffer.
323cbe7c: Remove read_page callback from XLogReader.
Remove the new GUC group WAL_RECOVERY recently added by a55a9847, as the
corresponding section of config.sgml is now reverted.
Discussion: https://postgr.es/m/CAOuzzgrn7iKnFRsB4MHp3UisEQAGgZMbk_ViTN4HV4-Ksq8zCg%40mail.gmail.com
These comments left the impression that USE_VALGRIND isn't really
essential for valgrind testing. But that's wrong, as I learned
the hard way today.
Discussion: https://postgr.es/m/512778.1620588546@sss.pgh.pa.us
It seems that various people have moved GUCs around in the config.sgml
listing without bothering to make the code agree. Ensure that the
config_group codes assigned to GUCs match where they are listed in
config.sgml. Likewise ensure that postgresql.conf.sample lists GUCs
in the same sub-section and same ordering as they appear in config.sgml.
(I've got some doubts about some of these choices, but for the purposes
of this patch, we'll treat config.sgml as gospel.)
Notably, this requires adding a WAL_RECOVERY config_group value,
because 1d257577e didn't. As long as we're renumbering that enum
anyway, let's take out the values corresponding to major groups
that are divided into sub-groups. No GUC should be assigned to the
major group itself, so those values just create a temptation to
do the wrong thing, while adding work for translators.
In passing, adjust the short_desc strings for PRESET_OPTIONS GUCs
to uniformly use the phrasing "Shows XYZ.", removing the impression
some of these strings left that you can set the value.
While some of these errors are old, no back-patch, as changing the
contents of the pg_settings view in stable branches seems more likely
to be seen as a compatibility break than anything helpful.
Bharath Rupireddy, Justin Pryzby, Tom Lane
Discussion: https://postgr.es/m/16997-ff16127f6e0d1390@postgresql.org
Discussion: https://postgr.es/m/20210413123139.GE6091@telsasoft.com
Design problems were discovered in the handling of composite types and
record types that would cause some relevant versions not to be recorded.
Misgivings were also expressed about the use of the pg_depend catalog
for this purpose. We're out of time for this release so we'll revert
and try again.
Commits reverted:
1bf946bd: Doc: Document known problem with Windows collation versions.
cf002008: Remove no-longer-relevant test case.
ef387bed: Fix bogus collation-version-recording logic.
0fb0a050: Hide internal error for pg_collation_actual_version(<bad OID>).
ff942057: Suppress "warning: variable 'collcollate' set but not used".
d50e3b1f: Fix assertion in collation version lookup.
f24b1569: Rethink extraction of collation dependencies.
257836a7: Track collation versions for indexes.
cd6f479e: Add pg_depend.refobjversion.
7d1297df: Remove pg_collation.collversion.
Discussion: https://postgr.es/m/CA%2BhUKGLhj5t1fcjqAu8iD9B3ixJtsTNqyCCD4V0aTO9kAKAjjA%40mail.gmail.com
In d6b8d29419 I (Álvaro) was sloppy about recording whether a
partition descripor does or does not include detached partitions, when
the snapshot checking does not see the pg_inherits row marked detached.
In that case no partition was omitted, yet in the relcache entry we were
saving the partdesc as omitting partitions. Flip that (so we save it as
a partdesc not omitting partitions, which indeed it doesn't), which
hopefully makes the code easier to reason about.
Author: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/CA+HiwqE7GxGU4VdzwZzfiz+Ont5SsopoFkgtrZGEdPqWRL+biA@mail.gmail.com
Currently, replication slot statistics are updated at prepare, commit, and
rollback. Now, if the transaction is interrupted the stats might not get
updated. Fixed this by updating replication statistics after every
stream/spill.
In passing update the docs to change the description of some of the slot
stats.
Author: Vignesh C, Sawada Masahiko
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/20210319185247.ldebgpdaxsowiflw@alap3.anarazel.de
We had a report of confusing server behavior caused by a client bug
that sent junk to the server: the server thought the junk was a
very long message length and waited patiently for data that would
never come. We can reduce the risk of that by being less trusting
about message lengths.
For a long time, libpq has had a heuristic rule that it wouldn't
believe large message size words, except for a small number of
message types that are expected to be (potentially) long. This
provides some defense against loss of message-boundary sync and
other corrupted-data cases. The server does something similar,
except that up to now it only limited the lengths of messages
received during the connection authentication phase. Let's
do the same as in libpq and put restrictions on the allowed
length of all messages, while distinguishing between message
types that are expected to be long and those that aren't.
I used a limit of 10000 bytes for non-long messages. (libpq's
corresponding limit is 30000 bytes, but given the asymmetry of
the FE/BE protocol, there's no good reason why the numbers should
be the same.) Experimentation suggests that this is at least a
factor of 10, maybe a factor of 100, more than we really need;
but plenty of daylight seems desirable to avoid false positives.
In any case we can adjust the limit based on beta-test results.
For long messages, set a limit of MaxAllocSize - 1, which is the
most that we can absorb into the StringInfo buffer that the message
is collected in. This just serves to make sure that a bogus message
size is reported as such, rather than as a confusing gripe about
not being able to enlarge a string buffer.
While at it, make sure that non-mainline code paths (such as
COPY FROM STDIN) are as paranoid as SocketBackend is, and validate
the message type code before believing the message length.
This provides an additional guard against getting stuck on corrupted
input.
Discussion: https://postgr.es/m/2003757.1619373089@sss.pgh.pa.us
Makes partition descriptor acquisition faster during the transient
period in which a partition is in the process of being detached.
This also adds the restriction that only one partition can be in
pending-detach state for a partitioned table.
While at it, return find_inheritance_children() API to what it was
before 71f4c8c6f7, and create a separate
find_inheritance_children_extended() that returns detailed info about
detached partitions.
(This incidentally fixes a bug in 8aba932251 whereby a memory context
holding a transient partdesc is reparented to a NULL PortalContext,
leading to permanent leak of that memory. The fix is to no longer rely
on reparenting contexts to PortalContext. Reported by Amit Langote.)
Per gripe from Amit Langote
Discussion: https://postgr.es/m/CA+HiwqFgpP1LxJZOBYGt9rpvTjXXkg5qG2+Xch2Z1Q7KrqZR1A@mail.gmail.com
Commit 8ff1c94649 allowed TRUNCATE command to truncate foreign tables.
Previously the information about "ONLY" options specified in TRUNCATE
command were passed to the foreign data wrapper. Then postgres_fdw
constructed the TRUNCATE command to issue the remote server and
included "ONLY" options in it based on the passed information.
On the other hand, "ONLY" options specified in SELECT, UPDATE or DELETE
have no effect when accessing or modifying the remote table, i.e.,
are not passed to the foreign data wrapper. So it's inconsistent to
make only TRUNCATE command pass the "ONLY" options to the foreign data
wrapper. Therefore this commit changes the TRUNCATE command so that
it doesn't pass the "ONLY" options to the foreign data wrapper,
for the consistency with other statements. Also this commit changes
postgres_fdw so that it always doesn't include "ONLY" options in
the TRUNCATE command that it constructs.
Author: Fujii Masao
Reviewed-by: Bharath Rupireddy, Kyotaro Horiguchi, Justin Pryzby, Zhihong Yu
Discussion: https://postgr.es/m/551ed8c1-f531-818b-664a-2cecdab99cd8@oss.nttdata.com
Previously, we used to use the array of size max_replication_slots to
store stats for replication slots. But that had two problems in the cases
where a message for dropping a slot gets lost: 1) the stats for the new
slot are not recorded if the array is full and 2) writing beyond the end
of the array if the user reduces the max_replication_slots.
This commit uses HTAB for replication slot statistics, resolving both
problems. Now, pgstat_vacuum_stat() search for all the dead replication
slots in stats hashtable and tell the collector to remove them. To avoid
showing the stats for the already-dropped slots, pg_stat_replication_slots
view searches slot stats by the slot name taken from pg_replication_slots.
Also, we send a message for creating a slot at slot creation, initializing
the stats. This reduces the possibility that the stats are accumulated
into the old slot stats when a message for dropping a slot gets lost.
Reported-by: Andres Freund
Author: Sawada Masahiko, test case by Vignesh C
Reviewed-by: Amit Kapila, Vignesh C, Dilip Kumar
Discussion: https://postgr.es/m/20210319185247.ldebgpdaxsowiflw@alap3.anarazel.de
The Truncate operation acquires an exclusive lock on the target relation
and indexes. It then waits for logical replication of the operation to
finish at commit. Now because we are acquiring the shared lock on the
target index to get index attributes in pgoutput while sending the
changes for the Truncate operation, it leads to a deadlock.
Actually, we don't need to acquire a lock on the target index as we build
the cache entry using a historic snapshot and all the later changes are
absorbed while decoding WAL. So, we wrote a special purpose function for
logical replication to get a bitmap of replica identity attribute numbers
where we get that information without locking the target index.
We decided not to backpatch this as there doesn't seem to be any field
complaint about this issue since it was introduced in commit 5dfd1e5a in
v11.
Reported-by: Haiying Tang
Author: Takamichi Osumi, test case by Li Japin
Reviewed-by: Amit Kapila, Ajin Cherian
Discussion: https://postgr.es/m/OS0PR01MB6113C2499C7DC70EE55ADB82FB759@OS0PR01MB6113.jpnprd01.prod.outlook.com
These functions shouldn't receive null arguments: multirange_constructor0()
doesn't have any arguments while multirange_constructor2() has a single array
argument, which is never null.
But mark them strict anyway for the sake of uniformity.
Also, make checks for null arguments use elog() instead of ereport() as these
errors should normally be never thrown. And adjust corresponding comments.
Catversion is bumped.
Reported-by: Peter Eisentraut
Discussion: https://postgr.es/m/0f783a96-8d67-9e71-996b-f34a7352eeef%40enterprisedb.com
Commit bbe0a81db6 introduced "INCLUDING COMPRESSION" option
in CREATE TABLE command, but previously TableLikeOption in gram.y and
parsenodes.h didn't classify this new option in alphabetical order
with the rest.
Author: Fujii Masao
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/YHerAixOhfR1ryXa@paquier.xyz
During queries coming from ri_triggers.c, we need to omit partitions
that are marked pending detach -- otherwise, the RI query is tricked
into allowing a row into the referencing table whose corresponding row
is in the detached partition. Which is bogus: once the detach operation
completes, the row becomes an orphan.
However, the code was not doing that in repeatable-read transactions,
because relcache kept a copy of the partition descriptor that included
the partition, and used it in the RI query. This commit changes the
partdesc cache code to only keep descriptors that aren't dependent on
a snapshot (namely: those where no detached partition exist, and those
where detached partitions are included). When a partdesc-without-
detached-partitions is requested, we create one afresh each time; also,
those partdescs are stored in PortalContext instead of
CacheMemoryContext.
find_inheritance_children gets a new output *detached_exist boolean,
which indicates whether any partition marked pending-detach is found.
Its "include_detached" input flag is changed to "omit_detached", because
that name captures desired the semantics more naturally.
CreatePartitionDirectory() and RelationGetPartitionDesc() arguments are
identically renamed.
This was noticed because a buildfarm member that runs with relcache
clobbering, which would not keep the improperly cached partdesc, broke
one test, which led us to realize that the expected output of that test
was bogus. This commit also corrects that expected output.
Author: Amit Langote <amitlangote09@gmail.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/3269784.1617215412@sss.pgh.pa.us
Since pg_depend can contain duplicate entries, we need to eliminate
those in information schema views that build on pg_depend, using
DISTINCT. Some of the older views already did that correctly, but
some of the more recently added ones didn't. (In some of these views,
it might not be possible to reproduce the issue because of how the
implementation happens to deduplicate dependencies while recording
them, but it seems better to keep this consistent in all cases.)
Commit f003d9f87 left this macro with inadequate (or, one could say,
too much) parenthesization. Which was catastrophic to the correctness
of calls such as "if (!XLogRecHasBlockRef(record, 1)) ...". There
are only a few of those, which perhaps explains why we didn't notice
immediately (with our general weakness of WAL replay testing being
another factor). I found it by debugging intermittent replay failures
like
2021-04-08 14:33:30.191 EDT [29463] PANIC: failed to locate backup block with ID 1
2021-04-08 14:33:30.191 EDT [29463] CONTEXT: WAL redo at 0/95D3438 for SPGist/ADD_NODE: off 1; blkref #0: rel 1663/16384/25998, blk 1
Previously, it was pg_stat_activity.queryid to match the
pg_stat_statements queryid column. This is an adjustment to patch
4f0b0966c8. This also adjusts some of the internal function calls to
match. Catversion bumped.
Reported-by: Álvaro Herrera, Julien Rouhaud
Discussion: https://postgr.es/m/20210408032704.GA7498@alvherre.pgsql
I didn't particularly like this function name, as it fails to
express what's going on. Also, returning the sort expression
alone isn't too helpful --- typically, a caller would also
need some other fields of the EquivalenceMember. But the
sole caller really only needs a bool result, so let's make
it "bool relation_can_be_sorted_early()".
Discussion: https://postgr.es/m/91f3ec99-85a4-fa55-ea74-33f85a5c651f@swarm64.com
An oversight introduced by the incremental-sort patches caused
"could not find pathkey item to sort" errors in some situations
where a sort key involves an aggregate or window function.
The basic problem here is that find_em_expr_usable_for_sorting_rel
isn't properly modeling what prepare_sort_from_pathkeys will do
later. Rather than hoping we can keep those functions in sync,
let's refactor so that they actually share the code for
identifying a suitable sort expression.
With this refactoring, tlist.c's tlist_member_ignore_relabel
is unused. I removed it in HEAD but left it in place in v13,
in case any extensions are using it.
Per report from Luc Vlaming. Back-patch to v13 where the
problem arose.
James Coleman and Tom Lane
Discussion: https://postgr.es/m/91f3ec99-85a4-fa55-ea74-33f85a5c651f@swarm64.com
In the new test after resetting the stats, we were not waiting for the
stats message to be delivered. Also, we need to decode the results for
the new test, otherwise, it will show the old stats.
In passing,
a. Change docs added by commit f5fc2f5b23 as per suggestion by
Justin Pryzby.
b. Bump the PGSTAT_FILE_FORMAT_ID as commit f5fc2f5b23 changes the file
format of stats.
Reported-by: Tom Lane based on buildfarm reports
Author: Vignesh C, Justin Pryzby
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/20210319185247.ldebgpdaxsowiflw@alap3.anarazel.de
Ooops, forgot to s/system_views.sql/system_functions.sql/g
in this part of 767982e36.
No need for an additional catversion bump, I think, since
these strings are gone by the time initdb finishes.
Discussion: https://postgr.es/m/3956760.1618529139@sss.pgh.pa.us
Adopt the new pre-parsed representation for all built-in and
information_schema SQL-language functions, except for a small
number that can't presently be converted because they have
polymorphic arguments.
This eliminates residual hazards around search-path safety of
these functions, and might provide some small performance benefits
by reducing parsing costs. It seems useful also to provide more
test coverage for the SQL-standard-body feature.
Discussion: https://postgr.es/m/3956760.1618529139@sss.pgh.pa.us
This adds the statistics about total transactions count and total
transaction data logically sent to the decoding output plugin from
ReorderBuffer. Users can query the pg_stat_replication_slots view to check
these stats.
Suggested-by: Andres Freund
Author: Vignesh C and Amit Kapila
Reviewed-by: Sawada Masahiko, Amit Kapila
Discussion: https://postgr.es/m/20210319185247.ldebgpdaxsowiflw@alap3.anarazel.de
Commit e717a9a18 changed the longstanding rule that prosrc is NOT NULL
because when a SQL-language function is written in SQL-standard style,
we don't currently have anything useful to put there. This seems a poor
decision though, as it could easily have negative impacts on external
PLs (opening them to crashes they didn't use to have, for instance).
SQL-function-related code can just as easily test "is prosqlbody not
null" as "is prosrc null", so there's no real gain there either.
Hence, revert the NOT NULL marking removal and adjust related logic.
For now, we just put an empty string into prosrc for SQL-standard
functions. Maybe we'll have a better idea later, although the
history of things like pg_attrdef.adsrc suggests that it's not
easy to maintain a string equivalent of a node tree.
This also adds an assertion that queryDesc->sourceText != NULL
to standard_ExecutorStart. We'd been silently relying on that
for awhile, so let's make it less silent.
Also fix some overlooked documentation and test cases.
Discussion: https://postgr.es/m/2197698.1617984583@sss.pgh.pa.us
This will make it consistent with the other usage of slotname in the code.
In the passing, change pgstat_report_replslot signature to use a structure
rather than multiple parameters.
Reported-by: Andres Freund
Author: Vignesh C
Reviewed-by: Sawada Masahiko, Amit Kapila
Discussion: https://postgr.es/m/20210319185247.ldebgpdaxsowiflw@alap3.anarazel.de
Previously, get_cached_rowtype() cached a pointer to a reference-counted
tuple descriptor from the typcache, relying on the ExprContextCallback
mechanism to release the tupdesc refcount when the expression tree
using the tupdesc was destroyed. This worked fine when it was designed,
but the introduction of within-DO-block COMMITs broke it. The refcount
is logged in a transaction-lifespan resource owner, but plpgsql won't
destroy simple expressions made within the DO block (before its first
commit) until the DO block is exited. That results in a warning about
a leaked tupdesc refcount when the COMMIT destroys the original resource
owner, and then an error about the active resource owner not holding a
matching refcount when the expression is destroyed.
To fix, get rid of the need to have a shutdown callback at all, by
instead caching a pointer to the relevant typcache entry. Those
survive for the life of the backend, so we needn't worry about the
pointer becoming stale. (For registered RECORD types, we can still
cache a pointer to the tupdesc, knowing that it won't change for the
life of the backend.) This mechanism has been in use in plpgsql
and expandedrecord.c since commit 4b93f5799, and seems to work well.
This change requires modifying the ExprEvalStep structs used by the
relevant expression step types, which is slightly worrisome for
back-patching. However, there seems no good reason for extensions
to be familiar with the details of these particular sub-structs.
Per report from Rohit Bhogate. Back-patch to v11 where within-DO-block
COMMITs became a thing.
Discussion: https://postgr.es/m/CAAV6ZkQRCVBh8qAY+SZiHnz+U+FqAGBBDaDTjF2yiKa2nJSLKg@mail.gmail.com
We'd previously noted the need for coping with Windows headers
that provide some other definition of macro "ERROR" than elog.h
does. It turns out that R also wants to define ERROR, and
WARNING too. PL/R has been working around this in a hacky way
that broke when we recently changed the numeric value of ERROR.
To let them have a more future-proof solution, provide an
alternate macro PGWARNING for WARNING, and make PGERROR visible
always, not only when #ifdef WIN32.
Discussion: https://postgr.es/m/CADK3HHK6iMChd1yoOqssxBn5Z14Zar8Ztr3G-N_fuG7F8YTP3w@mail.gmail.com
Commit 438fc4a39c prevented the WAL replay from writing
COMMIT_TS_SETTS record. By this change there is no code that
generates COMMIT_TS_SETTS record in PostgreSQL core.
Also we can think that there are no extensions using the record
because we've not received so far any complaints about the issue
that commit 438fc4a39c fixed. Therefore this commit removes
COMMIT_TS_SETTS record and its related code. Even without
this record, the timestamp required for commit timestamp feature
can be acquired from the COMMIT record.
Bump WAL page magic.
Reported-by: lx zou <zoulx1982@163.com>
Author: Fujii Masao
Reviewed-by: Alvaro Herrera
Discussion: https://postgr.es/m/16931-620d0f2fdc6108f1@postgresql.org
Commit c9c41c7a33 used two different
naming patterns. Standardize on the majority pattern, which was the
only pattern in the last reviewed version of that commit.
Comment fixes are applied on HEAD, and documentation improvements are
applied on back-branches where needed.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20210408164008.GJ6592@telsasoft.com
Backpatch-through: 9.6
This commit introduces new foreign data wrapper API for TRUNCATE.
It extends TRUNCATE command so that it accepts foreign tables as
the targets to truncate and invokes that API. Also it extends postgres_fdw
so that it can issue TRUNCATE command to foreign servers, by adding
new routine for that TRUNCATE API.
The information about options specified in TRUNCATE command, e.g.,
ONLY, CACADE, etc is passed to FDW via API. The list of foreign tables to
truncate is also passed to FDW. FDW truncates the foreign data sources
that the passed foreign tables specify, based on those information.
For example, postgres_fdw constructs TRUNCATE command using them
and issues it to the foreign server.
For performance, TRUNCATE command invokes the FDW routine for
TRUNCATE once per foreign server that foreign tables to truncate belong to.
Author: Kazutaka Onishi, Kohei KaiGai, slightly modified by Fujii Masao
Reviewed-by: Bharath Rupireddy, Michael Paquier, Zhihong Yu, Alvaro Herrera, Stephen Frost, Ashutosh Bapat, Amit Langote, Daniel Gustafsson, Ibrar Ahmed, Fujii Masao
Discussion: https://postgr.es/m/CAOP8fzb_gkReLput7OvOK+8NHgw-RKqNv59vem7=524krQTcWA@mail.gmail.com
Discussion: https://postgr.es/m/CAJuF6cMWDDqU-vn_knZgma+2GMaout68YUgn1uyDnexRhqqM5Q@mail.gmail.com
ScalarArrayOpExprs with "useOr=true" and a set of Consts on the righthand
side have traditionally been evaluated by using a linear search over the
array. When these arrays contain large numbers of elements then this
linear search could become a significant part of execution time.
Here we add a new method of evaluating ScalarArrayOpExpr expressions to
allow them to be evaluated by first building a hash table containing each
element, then on subsequent evaluations, we just probe that hash table to
determine if there is a match.
The planner is in charge of determining when this optimization is possible
and it enables it by setting hashfuncid in the ScalarArrayOpExpr. The
executor will only perform the hash table evaluation when the hashfuncid
is set.
This means that not all cases are optimized. For example CHECK constraints
containing an IN clause won't go through the planner, so won't get the
hashfuncid set. We could maybe do something about that at some later
date. The reason we're not doing it now is from fear that we may slow
down cases where the expression is evaluated only once. Those cases can
be common, for example, a single row INSERT to a table with a CHECK
constraint containing an IN clause.
In the planner, we enable this when there are suitable hash functions for
the ScalarArrayOpExpr's operator and only when there is at least
MIN_ARRAY_SIZE_FOR_HASHED_SAOP elements in the array. The threshold is
currently set to 9.
Author: James Coleman, David Rowley
Reviewed-by: David Rowley, Tomas Vondra, Heikki Linnakangas
Discussion: https://postgr.es/m/CAAaqYe8x62+=wn0zvNKCj55tPpg-JBHzhZFFc6ANovdqFw7-dA@mail.gmail.com
Introduce a new GUC recovery_prefetch, disabled by default. When
enabled, look ahead in the WAL and try to initiate asynchronous reading
of referenced data blocks that are not yet cached in our buffer pool.
For now, this is done with posix_fadvise(), which has several caveats.
Better mechanisms will follow in later work on the I/O subsystem.
The GUC maintenance_io_concurrency is used to limit the number of
concurrent I/Os we allow ourselves to initiate, based on pessimistic
heuristics used to infer that I/Os have begun and completed.
The GUC wal_decode_buffer_size is used to limit the maximum distance we
are prepared to read ahead in the WAL to find uncached blocks.
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com> (parts)
Reviewed-by: Andres Freund <andres@anarazel.de> (parts)
Reviewed-by: Tomas Vondra <tomas.vondra@2ndquadrant.com> (parts)
Tested-by: Tomas Vondra <tomas.vondra@2ndquadrant.com>
Tested-by: Jakub Wartak <Jakub.Wartak@tomtom.com>
Tested-by: Dmitry Dolgov <9erthalion6@gmail.com>
Tested-by: Sait Talha Nisanci <Sait.Nisanci@microsoft.com>
Discussion: https://postgr.es/m/CA%2BhUKGJ4VJN8ttxScUFM8dOKX0BrBiboo5uz1cq%3DAovOddfHpA%40mail.gmail.com
Teach xlogreader.c to decode its output into a circular buffer, to
support optimizations based on looking ahead.
* XLogReadRecord() works as before, consuming records one by one, and
allowing them to be examined via the traditional XLogRecGetXXX()
macros.
* An alternative new interface XLogNextRecord() is added that returns
pointers to DecodedXLogRecord structs that can be examined directly.
* XLogReadAhead() provides a second cursor that lets you see
further ahead, as long as data is available and there is enough space
in the decoding buffer. This returns DecodedXLogRecord pointers to the
caller, but also adds them to a queue of records that will later be
consumed by XLogNextRecord()/XLogReadRecord().
The buffer's size is controlled with wal_decode_buffer_size. The buffer
could potentially be placed into shared memory, for future projects.
Large records that don't fit in the circular buffer are called
"oversized" and allocated separately with palloc().
Discussion: https://postgr.es/m/CA+hUKGJ4VJN8ttxScUFM8dOKX0BrBiboo5uz1cq=AovOddfHpA@mail.gmail.com
Previously, the XLogReader module would fetch new input data using a
callback function. Redesign the interface so that it tells the caller
to insert more data with a special return value instead. This API suits
later patches for prefetching, encryption and maybe other future
projects that would otherwise require continually extending the callback
interface.
As incidental cleanup work, move global variables readOff, readLen and
readSegNo inside XlogReaderState.
Author: Kyotaro HORIGUCHI <horiguchi.kyotaro@lab.ntt.co.jp>
Author: Heikki Linnakangas <hlinnaka@iki.fi> (parts of earlier version)
Reviewed-by: Antonin Houska <ah@cybertec.at>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Reviewed-by: Takashi Menjo <takashi.menjo@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/20190418.210257.43726183.horiguchi.kyotaro%40lab.ntt.co.jp
There was some code in gen_prune_steps_from_opexps that needlessly
checked a list was not empty when it clearly had to contain at least one
item. This prompted a further cleanup operation in partprune.c.
Additionally, the previous code could end up adding additional needless
INTERSECT steps. However, those do not appear to be able to cause any
misbehavior.
gen_prune_steps_from_opexps is now no longer in charge of generating
combine pruning steps. Instead, gen_partprune_steps_internal, which
already does some combine step creation has been given the sole
responsibility of generating all combine steps. This means that when
we recursively call gen_partprune_steps_internal, since it always now adds
a combine step when it produces multiple steps, we can just pay attention
to the final step returned.
In passing, do quite a bit of work on the comments to try to more clearly
explain the role of both gen_partprune_steps_internal and
gen_prune_steps_from_opexps. This is fairly complex code so some extra
effort to give any new readers an overview of how things work seems like
a good idea.
Author: Amit Langote
Reported-by: Andy Fan
Reviewed-by: Kyotaro Horiguchi, Andy Fan, Ryan Lambert, David Rowley
Discussion: https://postgr.es/m/CAKU4AWqWoVii+bRTeBQmeVW+PznkdO8DfbwqNsu9Gj4ubt9A6w@mail.gmail.com
This adds a function, pg_wait_for_backend_termination(), and a new
timeout argument to pg_terminate_backend(), which will wait for the
backend to actually terminate (with or without signaling it to do so
depending on which function is called). The default behaviour of
pg_terminate_backend() remains being timeout=0 which does not waiting.
For pg_wait_for_backend_termination() the default wait is 5 seconds.
Author: Bharath Rupireddy
Reviewed-By: Fujii Masao, David Johnston, Muhammad Usama,
Hou Zhijie, Magnus Hagander
Discussion: https://postgr.es/m/CALj2ACUBpunmyhYZw-kXCYs5NM+h6oG_7Df_Tn4mLmmUQifkqA@mail.gmail.com
If you know the ID of a buffer that recently held a block that you would
like to pin, this function can be used check if it's still there. It
can be used to avoid a second lookup in the buffer mapping table after
PrefetchBuffer() reports a cache hit.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA+hUKGJ4VJN8ttxScUFM8dOKX0BrBiboo5uz1cq=AovOddfHpA@mail.gmail.com
Previously, autovacuum would completely ignore partitioned tables, which
is not good regarding analyze -- failing to analyze those tables means
poor plans may be chosen. Make autovacuum aware of those tables by
propagating "changes since analyze" counts from the leaf partitions up
the partitioning hierarchy.
This also introduces necessary reloptions support for partitioned tables
(autovacuum_enabled, autovacuum_analyze_scale_factor,
autovacuum_analyze_threshold). It's unclear how best to document this
aspect.
Author: Yuzuko Hosoya <yuzukohosoya@gmail.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/CAKkQ508_PwVgwJyBY=0Lmkz90j8CmWNPUxgHvCUwGhMrouz6UA@mail.gmail.com
This adds support for writing CREATE FUNCTION and CREATE PROCEDURE
statements for language SQL with a function body that conforms to the
SQL standard and is portable to other implementations.
Instead of the PostgreSQL-specific AS $$ string literal $$ syntax,
this allows writing out the SQL statements making up the body
unquoted, either as a single statement:
CREATE FUNCTION add(a integer, b integer) RETURNS integer
LANGUAGE SQL
RETURN a + b;
or as a block
CREATE PROCEDURE insert_data(a integer, b integer)
LANGUAGE SQL
BEGIN ATOMIC
INSERT INTO tbl VALUES (a);
INSERT INTO tbl VALUES (b);
END;
The function body is parsed at function definition time and stored as
expression nodes in a new pg_proc column prosqlbody. So at run time,
no further parsing is required.
However, this form does not support polymorphic arguments, because
there is no more parse analysis done at call time.
Dependencies between the function and the objects it uses are fully
tracked.
A new RETURN statement is introduced. This can only be used inside
function bodies. Internally, it is treated much like a SELECT
statement.
psql needs some new intelligence to keep track of function body
boundaries so that it doesn't send off statements when it sees
semicolons that are inside a function body.
Tested-by: Jaime Casanova <jcasanov@systemguards.com.ec>
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/1c11f1eb-f00c-43b7-799d-2d44132c02d7@2ndquadrant.com
Add a failsafe mechanism that is triggered by VACUUM when it notices
that the table's relfrozenxid and/or relminmxid are dangerously far in
the past. VACUUM checks the age of the table dynamically, at regular
intervals.
When the failsafe triggers, VACUUM takes extraordinary measures to
finish as quickly as possible so that relfrozenxid and/or relminmxid can
be advanced. VACUUM will stop applying any cost-based delay that may be
in effect. VACUUM will also bypass any further index vacuuming and heap
vacuuming -- it only completes whatever remaining pruning and freezing
is required. Bypassing index/heap vacuuming is enabled by commit
8523492d, which made it possible to dynamically trigger the mechanism
already used within VACUUM when it is run with INDEX_CLEANUP off.
It is expected that the failsafe will almost always trigger within an
autovacuum to prevent wraparound, long after the autovacuum began.
However, the failsafe mechanism can trigger in any VACUUM operation.
Even in a non-aggressive VACUUM, where we're likely to not advance
relfrozenxid, it still seems like a good idea to finish off remaining
pruning and freezing. An aggressive/anti-wraparound VACUUM will be
launched immediately afterwards. Note that the anti-wraparound VACUUM
that follows will itself trigger the failsafe, usually before it even
begins its first (and only) pass over the heap.
The failsafe is controlled by two new GUCs: vacuum_failsafe_age, and
vacuum_multixact_failsafe_age. There are no equivalent reloptions,
since that isn't expected to be useful. The GUCs have rather high
defaults (both default to 1.6 billion), and are expected to generally
only be used to make the failsafe trigger sooner/more frequently.
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAD21AoD0SkE11fMw4jD4RENAwBMcw1wasVnwpJVw3tVqPOQgAw@mail.gmail.com
Discussion: https://postgr.es/m/CAH2-WzmgH3ySGYeC-m-eOBsa2=sDwa292-CFghV4rESYo39FsQ@mail.gmail.com
Use the in-core query id computation for pg_stat_activity,
log_line_prefix, and EXPLAIN VERBOSE.
Similar to other fields in pg_stat_activity, only the queryid from the
top level statements are exposed, and if the backends status isn't
active then the queryid from the last executed statements is displayed.
Add a %Q placeholder to include the queryid in log_line_prefix, which
will also only expose top level statements.
For EXPLAIN VERBOSE, if a query identifier has been computed, either by
enabling compute_query_id or using a third-party module, display it.
Bump catalog version.
Discussion: https://postgr.es/m/20210407125726.tkvjdbw76hxnpwfi@nol
Author: Julien Rouhaud
Reviewed-by: Alvaro Herrera, Nitin Jadhav, Zhihong Yu
Add compute_query_id GUC to control whether a query identifier should be
computed by the core (off by default). It's thefore now possible to
disable core queryid computation and use pg_stat_statements with a
different algorithm to compute the query identifier by using a
third-party module.
To ensure that a single source of query identifier can be used and is
well defined, modules that calculate a query identifier should throw an
error if compute_query_id specified to compute a query id and if a query
idenfitier was already calculated.
Discussion: https://postgr.es/m/20210407125726.tkvjdbw76hxnpwfi@nol
Author: Julien Rouhaud
Reviewed-by: Alvaro Herrera, Nitin Jadhav, Zhihong Yu
Teach VACUUM to truncate the line pointer array of each heap page when a
contiguous group of LP_UNUSED line pointers appear at the end of the
array -- these unused and unreferenced items are excluded. This process
occurs during VACUUM's second pass over the heap, right after LP_DEAD
line pointers on the page (those encountered/pruned during the first
pass) are marked LP_UNUSED.
Truncation avoids line pointer bloat with certain workloads,
particularly those involving continual range DELETEs and bulk INSERTs
against the same table.
Also harden heapam code to check for an out-of-range page offset number
in places where we weren't already doing so.
Author: Matthias van de Meent <boekewurm+postgres@gmail.com>
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-By: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAEze2WjgaQc55Y5f5CQd3L=eS5CZcff2Obxp=O6pto8-f0hC4w@mail.gmail.com
Discussion: https://postgr.es/m/CAH2-Wzn6a64PJM1Ggzm=uvx2otsopJMhFQj_g1rAj4GWr3ZSzw@mail.gmail.com
The previous implementation (from 9afffcb833) had an unnecessary check
on the boundaries of the enum which trigtered compile warnings. To clean
it up, move the pre-existing static assert to a central location and
call that.
Reported-By: Erik Rijkers
Reviewed-By: Michael Paquier
Discussion: https://postgr.es/m/1056399262.13159.1617793249020@webmailclassic.xs4all.nl
Documentation and comments in code and tests have been using the terms
sensitive/insensitive cursor incorrectly relative to the SQL standard.
(Cursor sensitivity is only relevant for changes made in the same
transaction as the cursor, not for concurrent changes in other
sessions.) Moreover, some of the behavior of PostgreSQL is incorrect
according to the SQL standard, confusing the issue further. (WHERE
CURRENT OF changes are not visible in insensitive cursors, but they
should be.)
This change corrects the terminology and removes the claim that
sensitive cursors are supported. It also adds a test case that checks
the insensitive behavior in a "correct" way, using a change command
not using WHERE CURRENT OF. Finally, it adds the ASENSITIVE cursor
option to select the default asensitive behavior, per SQL standard.
There are no changes to cursor behavior in this patch.
Discussion: https://www.postgresql.org/message-id/flat/96ee8b30-9889-9e1b-b053-90e10c050e85%40enterprisedb.com
The "authenticated identity" is the string used by an authentication
method to identify a particular user. In many common cases, this is the
same as the PostgreSQL username, but for some third-party authentication
methods, the identifier in use may be shortened or otherwise translated
(e.g. through pg_ident user mappings) before the server stores it.
To help administrators see who has actually interacted with the system,
this commit adds the capability to store the original identity when
authentication succeeds within the backend's Port, and generates a log
entry when log_connections is enabled. The log entries generated look
something like this (where a local user named "foouser" is connecting to
the database as the database user called "admin"):
LOG: connection received: host=[local]
LOG: connection authenticated: identity="foouser" method=peer (/data/pg_hba.conf:88)
LOG: connection authorized: user=admin database=postgres application_name=psql
Port->authn_id is set according to the authentication method:
bsd: the PostgreSQL username (aka the local username)
cert: the client's Subject DN
gss: the user principal
ident: the remote username
ldap: the final bind DN
pam: the PostgreSQL username (aka PAM username)
password (and all pw-challenge methods): the PostgreSQL username
peer: the peer's pw_name
radius: the PostgreSQL username (aka the RADIUS username)
sspi: either the down-level (SAM-compatible) logon name, if
compat_realm=1, or the User Principal Name if compat_realm=0
The trust auth method does not set an authenticated identity. Neither
does clientcert=verify-full.
Port->authn_id could be used for other purposes, like a superuser-only
extra column in pg_stat_activity, but this is left as future work.
PostgresNode::connect_{ok,fails}() have been modified to let tests check
the backend log files for required or prohibited patterns, using the
new log_like and log_unlike parameters. This uses a method based on a
truncation of the existing server log file, like issues_sql_like().
Tests are added to the ldap, kerberos, authentication and SSL test
suites.
Author: Jacob Champion
Reviewed-by: Stephen Frost, Magnus Hagander, Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/c55788dd1773c521c862e8e0dddb367df51222be.camel@vmware.com
Delay creation of the projections for INSERT and UPDATE tuples
until they're needed. This saves a pretty fair amount of work
when only some of the partitions are actually touched.
The logic associated with identifying junk columns in UPDATE/DELETE
is moved to another loop, allowing removal of one loop over the
target relations; but it didn't actually change at all.
Extracted from a larger patch, which seemed to me to be too messy
to push in one commit.
Amit Langote, reviewed at different times by Heikki Linnakangas and
myself
Discussion: https://postgr.es/m/CA+HiwqG7ZruBmmih3wPsBZ4s0H2EhywrnXEduckY5Hr3fWzPWA@mail.gmail.com
Arrange to do some things on-demand, rather than immediately during
executor startup, because there's a fair chance of never having to do
them at all:
* Don't open result relations' indexes until needed.
* Don't initialize partition tuple routing, nor the child-to-root
tuple conversion map, until needed.
This wins in UPDATEs on partitioned tables when only some of the
partitions will actually receive updates; with larger partition
counts the savings is quite noticeable. Also, we can remove some
sketchy heuristics in ExecInitModifyTable about whether to set up
tuple routing.
Also, remove execPartition.c's private hash table tracking which
partitions were already opened by the ModifyTable node. Instead
use the hash added to ModifyTable itself by commit 86dc90056.
To allow lazy computation of the conversion maps, we now set
ri_RootResultRelInfo in all child ResultRelInfos. We formerly set it
only in some, not terribly well-defined, cases. This has user-visible
side effects in that now more error messages refer to the root
relation instead of some partition (and provide error data in the
root's column order, too). It looks to me like this is a strict
improvement in consistency, so I don't have a problem with the
output changes visible in this commit.
Extracted from a larger patch, which seemed to me to be too messy
to push in one commit.
Amit Langote, reviewed at different times by Heikki Linnakangas and
myself
Discussion: https://postgr.es/m/CA+HiwqG7ZruBmmih3wPsBZ4s0H2EhywrnXEduckY5Hr3fWzPWA@mail.gmail.com
Retry the call to heap_prune_page() in rare cases where there is
disagreement between the heap_prune_page() call and the call to
HeapTupleSatisfiesVacuum() that immediately follows. Disagreement is
possible when a concurrently-aborted transaction makes a tuple DEAD
during the tiny window between each step. This was the only case where
a tuple considered DEAD by VACUUM still had storage following pruning.
VACUUM's definition of dead tuples is now uniformly simple and
unambiguous: dead tuples from each page are always LP_DEAD line pointers
that were encountered just after we performed pruning (and just before
we considered freezing remaining items with tuple storage).
Eliminating the tupgone=true special case enables INDEX_CLEANUP=off
style skipping of index vacuuming that takes place based on flexible,
dynamic criteria. The INDEX_CLEANUP=off case had to know about skipping
indexes up-front before now, due to a subtle interaction with the
special case (see commit dd695979) -- this was a special case unto
itself. Now there are no special cases. And so now it won't matter
when or how we decide to skip index vacuuming: it won't affect how
pruning behaves, and it won't be affected by any of the implementation
details of pruning or freezing.
Also remove XLOG_HEAP2_CLEANUP_INFO records. These are no longer
necessary because we now rely entirely on heap pruning taking care of
recovery conflicts. There is no longer any need to generate recovery
conflicts for DEAD tuples that pruning just missed. This also means
that heap vacuuming now uses exactly the same strategy for recovery
conflicts as index vacuuming always has: REDO routines never need to
process a latestRemovedXid from the WAL record, since earlier REDO of
the WAL record from pruning is sufficient in all cases. The generic
XLOG_HEAP2_CLEAN record type is now split into two new record types to
reflect this new division (these are called XLOG_HEAP2_PRUNE and
XLOG_HEAP2_VACUUM).
Also stop acquiring a super-exclusive lock for heap pages when they're
vacuumed during VACUUM's second heap pass. A regular exclusive lock is
enough. This is correct because heap page vacuuming is now strictly a
matter of setting the LP_DEAD line pointers to LP_UNUSED. No other
backend can have a pointer to a tuple located in a pinned buffer that
can be invalidated by a concurrent heap page vacuum operation.
Heap vacuuming can now be thought of as conceptually similar to index
vacuuming and conceptually dissimilar to heap pruning. Heap pruning now
has sole responsibility for anything involving the logical contents of
the database (e.g., managing transaction status information, recovery
conflicts, considering what to do with HOT chains). Index vacuuming and
heap vacuuming are now only concerned with recycling garbage items from
physical data structures that back the logical database.
Bump XLOG_PAGE_MAGIC due to pruning and heap page vacuum WAL record
changes.
Credit for the idea of retrying pruning a page to avoid the tupgone case
goes to Andres Freund.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Andres Freund <andres@anarazel.de>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznneCXTzuFmcwx_EyRQgfsfJAAsu+CsqRFmFXCAar=nJw@mail.gmail.com
At present, if we want to update publications in a subscription, we
can use SET PUBLICATION. However, it requires supplying all
publications that exists and the new publications. If we want to add
new publications, it's inconvenient. The new syntax only supplies the
new publications. When the refresh is true, it only refreshes the new
publications.
Author: Japin Li <japinli@hotmail.com>
Author: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/MEYP282MB166939D0D6C480B7FBE7EFFBB6BC0@MEYP282MB1669.AUSP282.PROD.OUTLOOK.COM
The previous implementation of EXTRACT mapped internally to
date_part(), which returned type double precision (since it was
implemented long before the numeric type existed). This can lead to
imprecise output in some cases, so returning numeric would be
preferrable. Changing the return type of an existing function is a
bit risky, so instead we do the following: We implement a new set of
functions, which are now called "extract", in parallel to the existing
date_part functions. They work the same way internally but use
numeric instead of float8. The EXTRACT construct is now mapped by the
parser to these new extract functions. That way, dumps of views
etc. from old versions (which would use date_part) continue to work
unchanged, but new uses will map to the new extract functions.
Additionally, the reverse compilation of EXTRACT now reproduces the
original syntax, using the new mechanism introduced in
40c24bfef9.
The following minor changes of behavior result from the new
implementation:
- The column name from an isolated EXTRACT call is now "extract"
instead of "date_part".
- Extract from date now rejects inappropriate field names such as
HOUR. It was previously mapped internally to extract from
timestamp, so it would silently accept everything appropriate for
timestamp.
- Return values when extracting fields with possibly fractional
values, such as second and epoch, now have the full scale that the
value has internally (so, for example, '1.000000' instead of just
'1').
Reported-by: Petr Fedorov <petr.fedorov@phystech.edu>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/42b73d2d-da12-ba9f-570a-420e0cce19d9@phystech.edu
Commit 3e98c0bafb added pg_backend_memory_contexts view to display
the memory contexts of the backend process. However its target process
is limited to the backend that is accessing to the view. So this is
not so convenient when investigating the local memory bloat of other
backend process. To improve this situation, this commit adds
pg_log_backend_memory_contexts() function that requests to log
the memory contexts of the specified backend process.
This information can be also collected by calling
MemoryContextStats(TopMemoryContext) via a debugger. But
this technique cannot be used in some environments because no debugger
is available there. So, pg_log_backend_memory_contexts() allows us to
see the memory contexts of specified backend more easily.
Only superusers are allowed to request to log the memory contexts
because allowing any users to issue this request at an unbounded rate
would cause lots of log messages and which can lead to denial of service.
On receipt of the request, at the next CHECK_FOR_INTERRUPTS(),
the target backend logs its memory contexts at LOG_SERVER_ONLY level,
so that these memory contexts will appear in the server log but not
be sent to the client. It logs one message per memory context.
Because if it buffers all memory contexts into StringInfo to log them
as one message, which may require the buffer to be enlarged very much
and lead to OOM error since there can be a large number of memory
contexts in a backend.
When a backend process is consuming huge memory, logging all its
memory contexts might overrun available disk space. To prevent this,
now this patch limits the number of child contexts to log per parent
to 100. As with MemoryContextStats(), it supposes that practical cases
where the log gets long will typically be huge numbers of siblings
under the same parent context; while the additional debugging value
from seeing details about individual siblings beyond 100 will not be large.
There was another proposed patch to add the function to return
the memory contexts of specified backend as the result sets,
instead of logging them, in the discussion. However that patch is
not included in this commit because it had several issues to address.
Thanks to Tatsuhito Kasahara, Andres Freund, Tom Lane, Tomas Vondra,
Michael Paquier, Kyotaro Horiguchi and Zhihong Yu for the discussion.
Bump catalog version.
Author: Atsushi Torikoshi
Reviewed-by: Kyotaro Horiguchi, Zhihong Yu, Fujii Masao
Discussion: https://postgr.es/m/0271f440ac77f2a4180e0e56ebd944d1@oss.nttdata.com
The output plugin accepts a new parameter (messages) that controls if
logical decoding messages are written into the replication stream. It is
useful for those clients that use pgoutput as an output plugin and needs
to process messages that were written by pg_logical_emit_message().
Although logical streaming replication protocol supports logical
decoding messages now, logical replication does not use this feature yet.
Author: David Pirotte, Euler Taveira
Reviewed-by: Euler Taveira, Andres Freund, Ashutosh Bapat, Amit Kapila
Discussion: https://postgr.es/m/CADK3HHJ-+9SO7KuRLH=9Wa1rAo60Yreq1GFNkH_kd0=CdaWM+A@mail.gmail.com
Instead of using multiple parameters in parse_ouput_parameters function
signature, use the struct PGOutputData that encapsulates all pgoutput
options. It will be useful for future work where we need to add other
options in pgoutput.
Author: Euler Taveira
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/CADK3HHJ-+9SO7KuRLH=9Wa1rAo60Yreq1GFNkH_kd0=CdaWM+A@mail.gmail.com
Not much to say here: does what it says on the tin.
We steal a previously-always-zero bit from the nextOffset
field of leaf index tuples in order to track whether there
is a nulls bitmap. Otherwise it works about like included
columns in other index types.
Pavel Borisov, reviewed by Andrey Borodin and Anastasia Lubennikova,
and rather heavily editorialized on by me
Discussion: https://postgr.es/m/CALT9ZEFi-vMp4faht9f9Junb1nO3NOSjhpxTmbm1UGLMsLqiEQ@mail.gmail.com
Reorganize the state struct used by VACUUM -- group related items
together to make it easier to understand. Also stop relying on stack
variables inside lazy_scan_heap() -- move those into the state struct
instead. Doing things this way simplifies large groups of related
functions whose function signatures had a lot of unnecessary redundancy.
Switch over to using int64 for the struct fields used to count things
that are reported to the user via log_autovacuum and VACUUM VERBOSE
output. We were using double, but that doesn't seem to have any
advantages. Using int64 makes it possible to add assertions that verify
that the first pass over the heap (pruning) encounters precisely the
same number of LP_DEAD items that get deleted from indexes later on, in
the second pass over the heap. These assertions will be added in later
commits.
Finally, adjust the signatures of functions with IndexBulkDeleteResult
pointer arguments in cases where there was ambiguity about whether or
not the argument relates to a single index or all indexes. Functions
now use the idiom that both ambulkdelete() and amvacuumcleanup() have
always used (where appropriate): accept a mutable IndexBulkDeleteResult
pointer argument, and return a result IndexBulkDeleteResult pointer to
caller.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/CAH2-WzkeOSYwC6KNckbhk2b1aNnWum6Yyn0NKP9D-Hq1LGTDPw@mail.gmail.com
A commonly requested use-case is to have a role who can run an
unfettered pg_dump without having to explicitly GRANT that user access
to all tables, schemas, et al, without that role being a superuser.
This address that by adding a "pg_read_all_data" role which implicitly
gives any member of this role SELECT rights on all tables, views and
sequences, and USAGE rights on all schemas.
As there may be cases where it's also useful to have a role who has
write access to all objects, pg_write_all_data is also introduced and
gives users implicit INSERT, UPDATE and DELETE rights on all tables,
views and sequences.
These roles can not be logged into directly but instead should be
GRANT'd to a role which is able to log in. As noted in the
documentation, if RLS is being used then an administrator may (or may
not) wish to set BYPASSRLS on the login role which these predefined
roles are GRANT'd to.
Reviewed-by: Georgios Kokolatos
Discussion: https://postgr.es/m/20200828003023.GU29590@tamriel.snowman.net
Move the planner-control flags up so that there is more room for parse
options. Some pending patches need some room there, so do this
renumbering separately so that there is less potential for conflicts.
According to the documentation, the attType passed to the opclass
config function (and also relied on by the core code) is the type
of the heap column or expression being indexed. But what was
actually being passed was the type stored for the index column.
This made no difference for user-defined SP-GiST opclasses,
because we weren't allowing the STORAGE clause of CREATE OPCLASS
to be used, so the two types would be the same. But it's silly
not to allow that, seeing that the built-in poly_ops opclass
has a different value for opckeytype than opcintype, and that if you
want to do lossy storage then the types must really be different.
(Thus, user-defined opclasses doing lossy storage had to lie about
what type is in the index.) Hence, remove the restriction, and make
sure that we use the input column type not opckeytype where relevant.
For reasons of backwards compatibility with existing user-defined
opclasses, we can't quite insist that the specified leafType match
the STORAGE clause; instead just add an amvalidate() warning if
they don't match.
Also fix some bugs that would only manifest when trying to return
index entries when attType is different from attLeafType. It's not
too surprising that these have not been reported, because the only
usual reason for such a difference is to store the leaf value
lossily, rendering index-only scans impossible.
Add a src/test/modules module to exercise cases where attType is
different from attLeafType and yet index-only scan is supported.
Discussion: https://postgr.es/m/3728741.1617381471@sss.pgh.pa.us
pgstat_report_wait_start() and pgstat_report_wait_end() required two
conditional branches so far. One to check if MyProc is NULL, the other to
check if pgstat_track_activities is set. As wait events are used around
comparatively lightweight operations, and are inlined (reducing branch
predictor effectiveness), that's not great.
The dependency on MyProc has a second disadvantage: Low-level subsystems, like
storage/file/fd.c, report wait events, but architecturally it is preferable
for them to not depend on inter-process subsystems like proc.h (defining
PGPROC). After this change including pgstat.h (nor obviously its
sub-components like backend_status.h, wait_event.h, ...) does not pull in IPC
related headers anymore.
These goals, efficiency and abstraction, are achieved by having
pgstat_report_wait_start/end() not interact with MyProc, but instead a new
my_wait_event_info variable. At backend startup it points to a local variable,
removing the need to check for MyProc being NULL. During process
initialization my_wait_event_info is redirected to MyProc->wait_event_info. At
shutdown this is reversed. Because wait event reporting now does not need to
know about where the wait event is stored, it does not need to know about
PGPROC anymore.
The removal of the branch for checking pgstat_track_activities is simpler:
Don't check anymore. The cost due to the branch are often higher than the
store - and even if not, pgstat_track_activities is rarely disabled.
The main motivator to commit this work now is that removing the (indirect)
pgproc.h include from pgstat.h simplifies a patch to move statistics reporting
to shared memory (which still has a chance to get into 14).
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20210402194458.2vu324hkk2djq6ce@alap3.anarazel.de
Backend status (supporting pg_stat_activity) and command
progress (supporting pg_stat_progress*) related code is largely
independent from the rest of pgstat.[ch] (supporting views like
pg_stat_all_tables that accumulate data over time). See also
a333476b92.
This commit doesn't rename the function names to make the distinction
from the rest of pgstat_ clearer - that'd be more invasive and not
clearly beneficial. If we were to decide to do such a rename at some
point, it's better done separately from moving the code as well.
Robert's review was of an earlier version.
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/20210316195440.twxmlov24rr2nxrg@alap3.anarazel.de
Similarly to the cryptohash implementations, this refactors the existing
HMAC code into a single set of APIs that can be plugged with any crypto
libraries PostgreSQL is built with (only OpenSSL currently). If there
is no such libraries, a fallback implementation is available. Those new
APIs are designed similarly to the existing cryptohash layer, so there
is no real new design here, with the same logic around buffer bound
checks and memory handling.
HMAC has a dependency on cryptohashes, so all the cryptohash types
supported by cryptohash{_openssl}.c can be used with HMAC. This
refactoring is an advantage mainly for SCRAM, that included its own
implementation of HMAC with SHA256 without relying on the existing
crypto libraries even if PostgreSQL was built with their support.
This code has been tested on Windows and Linux, with and without
OpenSSL, across all the versions supported on HEAD from 1.1.1 down to
1.0.1. I have also checked that the implementations are working fine
using some sample results, a custom extension of my own, and doing
cross-checks across different major versions with SCRAM with the client
and the backend.
Author: Michael Paquier
Reviewed-by: Bruce Momjian
Discussion: https://postgr.es/m/X9m0nkEJEzIPXjeZ@paquier.xyz
The wait event related code is independent from the rest of the
pgstat.[ch] code, of nontrivial size and changes on a regular
basis. Put it into its own set of files.
As there doesn't seem to be a good pre-existing directory for code
like this, add src/backend/utils/activity.
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/20210316195440.twxmlov24rr2nxrg@alap3.anarazel.de
Provide a new GUC check_client_connection_interval that can be used to
check whether the client connection has gone away, while running very
long queries. It is disabled by default.
For now this uses a non-standard Linux extension (also adopted by at
least one other OS). POLLRDHUP is not defined by POSIX, and other OSes
don't have a reliable way to know if a connection was closed without
actually trying to read or write.
In future we might consider trying to send a no-op/heartbeat message
instead, but that could require protocol changes.
Author: Sergey Cherkashin <s.cherkashin@postgrespro.ru>
Author: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Tatsuo Ishii <ishii@sraoss.co.jp>
Reviewed-by: Konstantin Knizhnik <k.knizhnik@postgrespro.ru>
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Maksim Milyutin <milyutinma@gmail.com>
Reviewed-by: Tsunakawa, Takayuki/綱川 貴之 <tsunakawa.takay@fujitsu.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us> (much earlier version)
Discussion: https://postgr.es/m/77def86b27e41f0efcba411460e929ae%40postgrespro.ru
The caller of pgstat_report_replslot() passes int64 values to the function.
Also the function stores those values in PgStat_Counter (i.e., int64) fields
of PgStat_MsgReplSlot struct. But previously the function used "int" as
the data types of some arguments for those values, which could lead to
the overflow of values.
To avoid this risk, this commit fixes pgstat_report_replslot() to use
PgStat_Counter type for the arguments. Since they are the statistics counters,
PgStat_Counter, the data type used for counters, is used for them
instead of int64.
Reported-by: Vignesh C
Author: Vignesh C
Reviewed-by: Jeevan Ladhe, Fujii Masao
Discussion: https://postgr.es/m/CALDaNm080OpG=ZwOb0i8EyChH5SyHAMFWJCKaKTXmrfvJLbgaA@mail.gmail.com
Here we add a new executor node type named "Result Cache". The planner
can include this node type in the plan to have the executor cache the
results from the inner side of parameterized nested loop joins. This
allows caching of tuples for sets of parameters so that in the event that
the node sees the same parameter values again, it can just return the
cached tuples instead of rescanning the inner side of the join all over
again. Internally, result cache uses a hash table in order to quickly
find tuples that have been previously cached.
For certain data sets, this can significantly improve the performance of
joins. The best cases for using this new node type are for join problems
where a large portion of the tuples from the inner side of the join have
no join partner on the outer side of the join. In such cases, hash join
would have to hash values that are never looked up, thus bloating the hash
table and possibly causing it to multi-batch. Merge joins would have to
skip over all of the unmatched rows. If we use a nested loop join with a
result cache, then we only cache tuples that have at least one join
partner on the outer side of the join. The benefits of using a
parameterized nested loop with a result cache increase when there are
fewer distinct values being looked up and the number of lookups of each
value is large. Also, hash probes to lookup the cache can be much faster
than the hash probe in a hash join as it's common that the result cache's
hash table is much smaller than the hash join's due to result cache only
caching useful tuples rather than all tuples from the inner side of the
join. This variation in hash probe performance is more significant when
the hash join's hash table no longer fits into the CPU's L3 cache, but the
result cache's hash table does. The apparent "random" access of hash
buckets with each hash probe can cause a poor L3 cache hit ratio for large
hash tables. Smaller hash tables generally perform better.
The hash table used for the cache limits itself to not exceeding work_mem
* hash_mem_multiplier in size. We maintain a dlist of keys for this cache
and when we're adding new tuples and realize we've exceeded the memory
budget, we evict cache entries starting with the least recently used ones
until we have enough memory to add the new tuples to the cache.
For parameterized nested loop joins, we now consider using one of these
result cache nodes in between the nested loop node and its inner node. We
determine when this might be useful based on cost, which is primarily
driven off of what the expected cache hit ratio will be. Estimating the
cache hit ratio relies on having good distinct estimates on the nested
loop's parameters.
For now, the planner will only consider using a result cache for
parameterized nested loop joins. This works for both normal joins and
also for LATERAL type joins to subqueries. It is possible to use this new
node for other uses in the future. For example, to cache results from
correlated subqueries. However, that's not done here due to some
difficulties obtaining a distinct estimation on the outer plan to
calculate the estimated cache hit ratio. Currently we plan the inner plan
before planning the outer plan so there is no good way to know if a result
cache would be useful or not since we can't estimate the number of times
the subplan will be called until the outer plan is generated.
The functionality being added here is newly introducing a dependency on
the return value of estimate_num_groups() during the join search.
Previously, during the join search, we only ever needed to perform
selectivity estimations. With this commit, we need to use
estimate_num_groups() in order to estimate what the hit ratio on the
result cache will be. In simple terms, if we expect 10 distinct values
and we expect 1000 outer rows, then we'll estimate the hit ratio to be
99%. Since cache hits are very cheap compared to scanning the underlying
nodes on the inner side of the nested loop join, then this will
significantly reduce the planner's cost for the join. However, it's
fairly easy to see here that things will go bad when estimate_num_groups()
incorrectly returns a value that's significantly lower than the actual
number of distinct values. If this happens then that may cause us to make
use of a nested loop join with a result cache instead of some other join
type, such as a merge or hash join. Our distinct estimations have been
known to be a source of trouble in the past, so the extra reliance on them
here could cause the planner to choose slower plans than it did previous
to having this feature. Distinct estimations are also fairly hard to
estimate accurately when several tables have been joined already or when a
WHERE clause filters out a set of values that are correlated to the
expressions we're estimating the number of distinct value for.
For now, the costing we perform during query planning for result caches
does put quite a bit of faith in the distinct estimations being accurate.
When these are accurate then we should generally see faster execution
times for plans containing a result cache. However, in the real world, we
may find that we need to either change the costings to put less trust in
the distinct estimations being accurate or perhaps even disable this
feature by default. There's always an element of risk when we teach the
query planner to do new tricks that it decides to use that new trick at
the wrong time and causes a regression. Users may opt to get the old
behavior by turning the feature off using the enable_resultcache GUC.
Currently, this is enabled by default. It remains to be seen if we'll
maintain that setting for the release.
Additionally, the name "Result Cache" is the best name I could think of
for this new node at the time I started writing the patch. Nobody seems
to strongly dislike the name. A few people did suggest other names but no
other name seemed to dominate in the brief discussion that there was about
names. Let's allow the beta period to see if the current name pleases
enough people. If there's some consensus on a better name, then we can
change it before the release. Please see the 2nd discussion link below
for the discussion on the "Result Cache" name.
Author: David Rowley
Reviewed-by: Andy Fan, Justin Pryzby, Zhihong Yu, Hou Zhijie
Tested-By: Konstantin Knizhnik
Discussion: https://postgr.es/m/CAApHDvrPcQyQdWERGYWx8J%2B2DLUNgXu%2BfOSbQ1UscxrunyXyrQ%40mail.gmail.com
Discussion: https://postgr.es/m/CAApHDvq=yQXr5kqhRviT2RhNKwToaWr9JAN5t+5_PzhuRJ3wvg@mail.gmail.com
The existing convention in SP-GiST is that any pass-by-value datatype
is stored in Datum representation, i.e. it's of width sizeof(Datum)
even when typlen is less than that. This is okay, or at least it's
too late to change it, for prefix datums and node-label datums in inner
(upper) tuples. But it's problematic for leaf datums, because we'd
prefer those to be stored in Postgres' standard on-disk representation
so that we can easily extend leaf tuples to carry additional "included"
columns.
I believe, however, that we can get away with just up and changing that.
This would be an unacceptable on-disk-format break, but there are two
big mitigating factors:
1. It seems quite unlikely that there are any SP-GiST opclasses out
there that use pass-by-value leaf datatypes. Certainly none of the
ones in core do, nor has codesearch.debian.net heard of any. Given
what SP-GiST is good for, it's hard to conceive of a use-case where
the leaf-level values would be both small and fixed-width. (As an
example, if you wanted to index text values with the leaf level being
just a byte, then every text string would have to be represented
with one level of inner tuple per preceding byte, which would be
horrendously space-inefficient and slow to access. You always want
to use as few inner-tuple levels as possible, leaving as much as
possible in the leaf values.)
2. Even granting that you have such an index, this change only
breaks things on big-endian machines. On little-endian, the high
order bytes of the Datum format will now just appear to be alignment
padding space.
So, change the code to store pass-by-value leaf datums in their
usual on-disk form. Inner-tuple datums are not touched.
This is extracted from a larger patch that intends to add support for
"included" columns. I'm committing it separately for visibility in
our commit logs.
Pavel Borisov and Tom Lane, reviewed by Andrey Borodin
Discussion: https://postgr.es/m/CALT9ZEFi-vMp4faht9f9Junb1nO3NOSjhpxTmbm1UGLMsLqiEQ@mail.gmail.com
This gives a small performance gain, by reducing the number of calls
to the conversion/verification function, and letting it work with
larger inputs. Also, reorganizing the input pipeline makes it easier
to parallelize the input parsing: after the input has been converted
to the database encoding, the next stage of finding the newlines can
be done in parallel, because there cannot be any newline chars
"embedded" in multi-byte characters in the encodings that we support
as server encodings.
This changes behavior in one corner case: if client and server
encodings are the same single-byte encoding (e.g. latin1), previously
the input would not be checked for zero bytes ('\0'). Any fields
containing zero bytes would be truncated at the zero. But if encoding
conversion was needed, the conversion routine would throw an error on
the zero. After this commit, the input is always checked for zeros.
Reviewed-by: John Naylor
Discussion: https://www.postgresql.org/message-id/e7861509-3960-538a-9025-b75a61188e01%40iki.fi
With the 'noError' argument, you can try to convert a buffer without
knowing the character boundaries beforehand. The functions now need to
return the number of input bytes successfully converted.
This is is a backwards-incompatible change, if you have created a custom
encoding conversion with CREATE CONVERSION. This adds a check to
pg_upgrade for that, refusing the upgrade if there are any user-defined
encoding conversions. Custom conversions are very rare, there are no
commonly used extensions that I know of that uses that feature. No other
objects can depend on conversions, so if you do have one, you can fairly
easily drop it before upgrading, and recreate it after the upgrade with
an updated version.
Add regression tests for built-in encoding conversions. This doesn't cover
every conversion, but it covers all the internal functions in conv.c that
are used to implement the conversions.
Reviewed-by: John Naylor
Discussion: https://www.postgresql.org/message-id/e7861509-3960-538a-9025-b75a61188e01%40iki.fi
This removes "Add Result Cache executor node". It seems that something
weird is going on with the tracking of cache hits and misses as
highlighted by many buildfarm animals. It's not yet clear what the
problem is as other parts of the plan indicate that the cache did work
correctly, it's just the hits and misses that were being reported as 0.
This is especially a bad time to have the buildfarm so broken, so
reverting before too many more animals go red.
Discussion: https://postgr.es/m/CAApHDvq_hydhfovm4=izgWs+C5HqEeRScjMbOgbpC-jRAeK3Yw@mail.gmail.com
Here we add a new executor node type named "Result Cache". The planner
can include this node type in the plan to have the executor cache the
results from the inner side of parameterized nested loop joins. This
allows caching of tuples for sets of parameters so that in the event that
the node sees the same parameter values again, it can just return the
cached tuples instead of rescanning the inner side of the join all over
again. Internally, result cache uses a hash table in order to quickly
find tuples that have been previously cached.
For certain data sets, this can significantly improve the performance of
joins. The best cases for using this new node type are for join problems
where a large portion of the tuples from the inner side of the join have
no join partner on the outer side of the join. In such cases, hash join
would have to hash values that are never looked up, thus bloating the hash
table and possibly causing it to multi-batch. Merge joins would have to
skip over all of the unmatched rows. If we use a nested loop join with a
result cache, then we only cache tuples that have at least one join
partner on the outer side of the join. The benefits of using a
parameterized nested loop with a result cache increase when there are
fewer distinct values being looked up and the number of lookups of each
value is large. Also, hash probes to lookup the cache can be much faster
than the hash probe in a hash join as it's common that the result cache's
hash table is much smaller than the hash join's due to result cache only
caching useful tuples rather than all tuples from the inner side of the
join. This variation in hash probe performance is more significant when
the hash join's hash table no longer fits into the CPU's L3 cache, but the
result cache's hash table does. The apparent "random" access of hash
buckets with each hash probe can cause a poor L3 cache hit ratio for large
hash tables. Smaller hash tables generally perform better.
The hash table used for the cache limits itself to not exceeding work_mem
* hash_mem_multiplier in size. We maintain a dlist of keys for this cache
and when we're adding new tuples and realize we've exceeded the memory
budget, we evict cache entries starting with the least recently used ones
until we have enough memory to add the new tuples to the cache.
For parameterized nested loop joins, we now consider using one of these
result cache nodes in between the nested loop node and its inner node. We
determine when this might be useful based on cost, which is primarily
driven off of what the expected cache hit ratio will be. Estimating the
cache hit ratio relies on having good distinct estimates on the nested
loop's parameters.
For now, the planner will only consider using a result cache for
parameterized nested loop joins. This works for both normal joins and
also for LATERAL type joins to subqueries. It is possible to use this new
node for other uses in the future. For example, to cache results from
correlated subqueries. However, that's not done here due to some
difficulties obtaining a distinct estimation on the outer plan to
calculate the estimated cache hit ratio. Currently we plan the inner plan
before planning the outer plan so there is no good way to know if a result
cache would be useful or not since we can't estimate the number of times
the subplan will be called until the outer plan is generated.
The functionality being added here is newly introducing a dependency on
the return value of estimate_num_groups() during the join search.
Previously, during the join search, we only ever needed to perform
selectivity estimations. With this commit, we need to use
estimate_num_groups() in order to estimate what the hit ratio on the
result cache will be. In simple terms, if we expect 10 distinct values
and we expect 1000 outer rows, then we'll estimate the hit ratio to be
99%. Since cache hits are very cheap compared to scanning the underlying
nodes on the inner side of the nested loop join, then this will
significantly reduce the planner's cost for the join. However, it's
fairly easy to see here that things will go bad when estimate_num_groups()
incorrectly returns a value that's significantly lower than the actual
number of distinct values. If this happens then that may cause us to make
use of a nested loop join with a result cache instead of some other join
type, such as a merge or hash join. Our distinct estimations have been
known to be a source of trouble in the past, so the extra reliance on them
here could cause the planner to choose slower plans than it did previous
to having this feature. Distinct estimations are also fairly hard to
estimate accurately when several tables have been joined already or when a
WHERE clause filters out a set of values that are correlated to the
expressions we're estimating the number of distinct value for.
For now, the costing we perform during query planning for result caches
does put quite a bit of faith in the distinct estimations being accurate.
When these are accurate then we should generally see faster execution
times for plans containing a result cache. However, in the real world, we
may find that we need to either change the costings to put less trust in
the distinct estimations being accurate or perhaps even disable this
feature by default. There's always an element of risk when we teach the
query planner to do new tricks that it decides to use that new trick at
the wrong time and causes a regression. Users may opt to get the old
behavior by turning the feature off using the enable_resultcache GUC.
Currently, this is enabled by default. It remains to be seen if we'll
maintain that setting for the release.
Additionally, the name "Result Cache" is the best name I could think of
for this new node at the time I started writing the patch. Nobody seems
to strongly dislike the name. A few people did suggest other names but no
other name seemed to dominate in the brief discussion that there was about
names. Let's allow the beta period to see if the current name pleases
enough people. If there's some consensus on a better name, then we can
change it before the release. Please see the 2nd discussion link below
for the discussion on the "Result Cache" name.
Author: David Rowley
Reviewed-by: Andy Fan, Justin Pryzby, Zhihong Yu
Tested-By: Konstantin Knizhnik
Discussion: https://postgr.es/m/CAApHDvrPcQyQdWERGYWx8J%2B2DLUNgXu%2BfOSbQ1UscxrunyXyrQ%40mail.gmail.com
Discussion: https://postgr.es/m/CAApHDvq=yQXr5kqhRviT2RhNKwToaWr9JAN5t+5_PzhuRJ3wvg@mail.gmail.com
According to the comments, when an invalid or dropped column oid is passed
to has_column_privilege(), the intention has always been to return NULL.
However, when the caller had table level privilege the invalid/missing
column was never discovered, because table permissions were checked first.
Fix that by introducing extended versions of pg_attribute_acl(check|mask)
and pg_class_acl(check|mask) which take a new argument, is_missing. When
is_missing is NULL, the old behavior is preserved. But when is_missing is
passed by the caller, no ERROR is thrown for dropped or missing
columns/relations, and is_missing is flipped to true. This in turn allows
has_column_privilege to check for column privileges first, providing the
desired semantics.
Not backpatched since it is a user visible behavioral change with no previous
complaints, and the fix is a bit on the invasive side.
Author: Joe Conway
Reviewed-By: Tom Lane
Reported by: Ian Barwick
Discussion: https://postgr.es/m/flat/9b5f4311-157b-4164-7fe7-077b4fe8ed84%40joeconway.com
This patch makes two closely related sets of changes:
1. For UPDATE, the subplan of the ModifyTable node now only delivers
the new values of the changed columns (i.e., the expressions computed
in the query's SET clause) plus row identity information such as CTID.
ModifyTable must re-fetch the original tuple to merge in the old
values of any unchanged columns. The core advantage of this is that
the changed columns are uniform across all tables of an inherited or
partitioned target relation, whereas the other columns might not be.
A secondary advantage, when the UPDATE involves joins, is that less
data needs to pass through the plan tree. The disadvantage of course
is an extra fetch of each tuple to be updated. However, that seems to
be very nearly free in context; even worst-case tests don't show it to
add more than a couple percent to the total query cost. At some point
it might be interesting to combine the re-fetch with the tuple access
that ModifyTable must do anyway to mark the old tuple dead; but that
would require a good deal of refactoring and it seems it wouldn't buy
all that much, so this patch doesn't attempt it.
2. For inherited UPDATE/DELETE, instead of generating a separate
subplan for each target relation, we now generate a single subplan
that is just exactly like a SELECT's plan, then stick ModifyTable
on top of that. To let ModifyTable know which target relation a
given incoming row refers to, a tableoid junk column is added to
the row identity information. This gets rid of the horrid hack
that was inheritance_planner(), eliminating O(N^2) planning cost
and memory consumption in cases where there were many unprunable
target relations.
Point 2 of course requires point 1, so that there is a uniform
definition of the non-junk columns to be returned by the subplan.
We can't insist on uniform definition of the row identity junk
columns however, if we want to keep the ability to have both
plain and foreign tables in a partitioning hierarchy. Since
it wouldn't scale very far to have every child table have its
own row identity column, this patch includes provisions to merge
similar row identity columns into one column of the subplan result.
In particular, we can merge the whole-row Vars typically used as
row identity by FDWs into one column by pretending they are type
RECORD. (It's still okay for the actual composite Datums to be
labeled with the table's rowtype OID, though.)
There is more that can be done to file down residual inefficiencies
in this patch, but it seems to be committable now.
FDW authors should note several API changes:
* The argument list for AddForeignUpdateTargets() has changed, and so
has the method it must use for adding junk columns to the query. Call
add_row_identity_var() instead of manipulating the parse tree directly.
You might want to reconsider exactly what you're adding, too.
* PlanDirectModify() must now work a little harder to find the
ForeignScan plan node; if the foreign table is part of a partitioning
hierarchy then the ForeignScan might not be the direct child of
ModifyTable. See postgres_fdw for sample code.
* To check whether a relation is a target relation, it's no
longer sufficient to compare its relid to root->parse->resultRelation.
Instead, check it against all_result_relids or leaf_result_relids,
as appropriate.
Amit Langote and Tom Lane
Discussion: https://postgr.es/m/CA+HiwqHpHdqdDn48yCEhynnniahH78rwcrv1rEX65-fsZGBOLQ@mail.gmail.com
This allows something like
SELECT ... FROM t1 JOIN t2 USING (a, b, c) AS x
where x has the columns a, b, c and unlike a regular alias it does not
hide the range variables of the tables being joined t1 and t2.
Per SQL:2016 feature F404 "Range variable for common column names".
Reviewed-by: Vik Fearing <vik.fearing@2ndquadrant.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/454638cf-d563-ab76-a585-2564428062af@2ndquadrant.com
This implements asynchronous execution, which runs multiple parts of a
non-parallel-aware Append concurrently rather than serially to improve
performance when possible. Currently, the only node type that can be
run concurrently is a ForeignScan that is an immediate child of such an
Append. In the case where such ForeignScans access data on different
remote servers, this would run those ForeignScans concurrently, and
overlap the remote operations to be performed simultaneously, so it'll
improve the performance especially when the operations involve
time-consuming ones such as remote join and remote aggregation.
We may extend this to other node types such as joins or aggregates over
ForeignScans in the future.
This also adds the support for postgres_fdw, which is enabled by the
table-level/server-level option "async_capable". The default is false.
Robert Haas, Kyotaro Horiguchi, Thomas Munro, and myself. This commit
is mostly based on the patch proposed by Robert Haas, but also uses
stuff from the patch proposed by Kyotaro Horiguchi and from the patch
proposed by Thomas Munro. Reviewed by Kyotaro Horiguchi, Konstantin
Knizhnik, Andrey Lepikhov, Movead Li, Thomas Munro, Justin Pryzby, and
others.
Discussion: https://postgr.es/m/CA%2BTgmoaXQEt4tZ03FtQhnzeDEMzBck%2BLrni0UWHVVgOTnA6C1w%40mail.gmail.com
Discussion: https://postgr.es/m/CA%2BhUKGLBRyu0rHrDCMC4%3DRn3252gogyp1SjOgG8SEKKZv%3DFwfQ%40mail.gmail.com
Discussion: https://postgr.es/m/20200228.170650.667613673625155850.horikyota.ntt%40gmail.com
ParseNamespaceItem had a wired-in assumption that p_rte->eref
describes the table and column aliases exposed by the nsitem. This
relaxes this by creating a separate p_names field in an nsitem. This
is mainly preparation for a patch for JOIN USING aliases, but it saves
one indirection in common code paths, so it's possibly a win on its
own.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/785329.1616455091@sss.pgh.pa.us
Here we add a new output parameter to estimate_num_groups() to allow it to
inform the caller of additional, possibly useful information about the
estimation.
The new output parameter is a struct that currently contains just a single
field with a set of flags. This was done rather than having the flags as
an output parameter to allow future fields to be added without having to
change the signature of the function at a later date when we want to pass
back further information that might not be suitable to store in the flags
field.
It seems reasonable that one day in the future that the planner would want
to know more about the estimation. For example, how many individual sets
of statistics was the estimation generated from? The planner may want to
take that into account if we ever want to consider risks as well as costs
when generating plans.
For now, there's only 1 flag we set in the flags field. This is to
indicate if the estimation fell back on using the hard-coded constants in
any part of the estimation. Callers may like to change their behavior if
this is set, and this gives them the ability to do so. Callers may pass
the flag pointer as NULL if they have no interest in obtaining any
additional information about the estimate.
We're not adding any actual usages of these flags here. Some follow-up
commits will make use of this feature. Additionally, we're also not
making any changes to add support for clauselist_selectivity() and
clauselist_selectivity_ext(). However, if this is required in the future
then the same struct being added here should be fine to use as a new
output argument for those functions too.
Author: David Rowley
Discussion: https://postgr.es/m/CAApHDvqQqpk=1W-G_ds7A9CsXX3BggWj_7okinzkLVhDubQzjA@mail.gmail.com
Previously simplehash.h only exposed a method to perform a hash table
delete using the hash table key. This meant that the delete function had
to perform a hash lookup in order to find the entry to delete. Here we
add a new function so that users of simplehash.h can perform a hash delete
directly using the entry pointer, thus saving the hash lookup.
An upcoming patch that uses simplehash.h already has performed the hash
lookup so already has the entry pointer. This change will allow the
code in that patch to perform the hash delete without the code in
simplehash.h having to perform an additional hash lookup.
Author: David Rowley
Reviewed-by: Andres Freund
Discussion: https://postgr.es/m/CAApHDvqFLXXge153WmPsjke5VGOSt7Ez0yD0c7eBXLfmWxs3Kw@mail.gmail.com
Along with gid, this provides a different way to identify the transaction.
The users that use xid in some way to prepare the transactions can use it
to filter prepare transactions. The later commands COMMIT PREPARED or
ROLLBACK PREPARED carries both identifiers, providing an output plugin the
choice of what to use.
Author: Markus Wanner
Reviewed-by: Vignesh C, Amit Kapila
Discussion: https://postgr.es/m/ee280000-7355-c4dc-e47b-2436e7be959c@enterprisedb.com
The design of the data structures which allow storage of the per-worker
memory during parallel seq scans were not ideal. The work done in
56788d215 required an additional data structure to allow workers to
remember the range of pages that had been allocated to them for
processing during a parallel seqscan. That commit added a void pointer
field to TableScanDescData to allow heapam to store the per-worker
allocation information. However putting the field there made very little
sense given that we have AM specific structs for that, e.g.
HeapScanDescData.
Here we remove the void pointer field from TableScanDescData and add a
dedicated field for this purpose to HeapScanDescData.
Previously we also allocated memory for this parallel per-worker data for
all scans, regardless if it was a parallel scan or not. This was just a
wasted allocation for non-parallel scans, so here we make the allocation
conditional on the scan being parallel.
Also, add previously missing pfree() to free the per-worker data in
heap_endscan().
Reported-by: Andres Freund
Reviewed-by: Andres Freund
Discussion: https://postgr.es/m/20210317023101.anvejcfotwka6gaa@alap3.anarazel.de
Currently we only recognize the Common Name (CN) of a certificate's
subject to be matched against the user name. Thus certificates with
subjects '/OU=eng/CN=fred' and '/OU=sales/CN=fred' will have the same
connection rights. This patch provides an option to match the whole
Distinguished Name (DN) instead of just the CN. On any hba line using
client certificate identity, there is an option 'clientname' which can
have values of 'DN' or 'CN'. The default is 'CN', the current procedure.
The DN is matched against the RFC2253 formatted DN, which looks like
'CN=fred,OU=eng'.
This facility of probably best used in conjunction with an ident map.
Discussion: https://postgr.es/m/92e70110-9273-d93c-5913-0bccb6562740@dunslane.net
Reviewed-By: Michael Paquier, Daniel Gustafsson, Jacob Champion
Here we aim to reduce duplicate work done by contain_volatile_functions()
by caching whether PathTargets and RestrictInfos contain any volatile
functions the first time contain_volatile_functions() is called for them.
Any future calls for these nodes just use the cached value rather than
going to the trouble of recursively checking the sub-node all over again.
Thanks to Tom Lane for the idea.
Any locations in the code which make changes to a PathTarget or
RestrictInfo which could change the outcome of the volatility check must
change the cached value back to VOLATILITY_UNKNOWN again.
contain_volatile_functions() is the only code in charge of setting the
cache value to either VOLATILITY_VOLATILE or VOLATILITY_NOVOLATILE.
Some existing code does benefit from this additional caching, however,
this change is mainly aimed at an upcoming patch that must check for
volatility during the join search. Repeated volatility checks in that
case can become very expensive when the join search contains more than a
few relations.
Author: David Rowley
Discussion: https://postgr.es/m/3795226.1614059027@sss.pgh.pa.us
Allow defining extended statistics on expressions, not just just on
simple column references. With this commit, expressions are supported
by all existing extended statistics kinds, improving the same types of
estimates. A simple example may look like this:
CREATE TABLE t (a int);
CREATE STATISTICS s ON mod(a,10), mod(a,20) FROM t;
ANALYZE t;
The collected statistics are useful e.g. to estimate queries with those
expressions in WHERE or GROUP BY clauses:
SELECT * FROM t WHERE mod(a,10) = 0 AND mod(a,20) = 0;
SELECT 1 FROM t GROUP BY mod(a,10), mod(a,20);
This introduces new internal statistics kind 'e' (expressions) which is
built automatically when the statistics object definition includes any
expressions. This represents single-expression statistics, as if there
was an expression index (but without the index maintenance overhead).
The statistics is stored in pg_statistics_ext_data as an array of
composite types, which is possible thanks to 79f6a942bd.
CREATE STATISTICS allows building statistics on a single expression, in
which case in which case it's not possible to specify statistics kinds.
A new system view pg_stats_ext_exprs can be used to display expression
statistics, similarly to pg_stats and pg_stats_ext views.
ALTER TABLE ... ALTER COLUMN ... TYPE now treats indexes the same way it
treats indexes, i.e. it drops and recreates the statistics. This means
all statistics are reset, and we no longer try to preserve at least the
functional dependencies. This should not be a major issue in practice,
as the functional dependencies actually rely on per-column statistics,
which were always reset anyway.
Author: Tomas Vondra
Reviewed-by: Justin Pryzby, Dean Rasheed, Zhihong Yu
Discussion: https://postgr.es/m/ad7891d2-e90c-b446-9fe2-7419143847d7%40enterprisedb.com
Membership consists, implicitly, of the current database owner. Expect
use in template databases. Once pg_database_owner has rights within a
template, each owner of a database instantiated from that template will
exercise those rights.
Reviewed by John Naylor.
Discussion: https://postgr.es/m/20201228043148.GA1053024@rfd.leadboat.com
Adds BRIN opclasses similar to the existing minmax, except that instead
of summarizing the page range into a single [min,max] range, the summary
consists of multiple ranges and/or points, allowing gaps. This allows
more efficient handling of data with poor correlation to physical
location within the table and/or outlier values, for which the regular
minmax opclassed tend to work poorly.
It's possible to specify the number of values kept for each page range,
either as a single point or an interval boundary.
CREATE TABLE t (a int);
CREATE INDEX ON t
USING brin (a int4_minmax_multi_ops(values_per_range=16));
When building the summary, the values are combined into intervals with
the goal to minimize the "covering" (sum of interval lengths), using a
support procedure computing distance between two values.
Bump catversion, due to various catalog changes.
Author: Tomas Vondra <tomas.vondra@postgresql.org>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Alexander Korotkov <aekorotkov@gmail.com>
Reviewed-by: Sokolov Yura <y.sokolov@postgrespro.ru>
Reviewed-by: John Naylor <john.naylor@enterprisedb.com>
Discussion: https://postgr.es/m/c1138ead-7668-f0e1-0638-c3be3237e812@2ndquadrant.com
Discussion: https://postgr.es/m/5d78b774-7e9c-c94e-12cf-fef51cc89b1a%402ndquadrant.com
Andres Freund
Daniel Gustafsson
Tom Lane
David Rowley
Alvaro Herrera
Peter Eisentraut
Alexander Korotkov
Amit Kapila
Peter Geoghegan
Michael Paquier
Noah Misch
John Naylor
Fujii Masao
Thomas Munro
Heikki Linnakangas
Dean Rasheed
Andrew Dunstan
Tomas Vondra
Etsuro Fujita
Bruce Momjian
Magnus Hagander
Stephen Frost
Joe Conway