The function declaration for select_next_encryption_method use the
variable name have_valid_connection, so fix the prototype in the
header to match that.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/3F577953-A29E-4722-98AD-2DA9EFF2CBB8@yesql.se
Coverity pointed out that the function checks for conn->sslmode !=
NULL, which implies that it might be NULL, but later we access it
without a NULL-check anyway. It doesn't know that it is in fact always
initialized earlier, in conninfo_add_defaults(), and hence the
NULL-check is not necessary. However, there is a lot of distance
between conninfo_add_defaults() and pqConnectOptions2(), so it's not
surprising that it doesn't see that. Put back the initialization code,
as it existed before commit 05fd30c0e7, to silence the warning.
In the long run, I'd like to refactor the libpq options handling and
initalization code. It seems silly to strdup() and copy strings, for
things like sslmode that have a limited set of possible values; it
should be an enum. But that's for another day.
By skipping SSLRequest, you can eliminate one round-trip when
establishing a TLS connection. It is also more friendly to generic TLS
proxies that don't understand the PostgreSQL protocol.
This is disabled by default in libpq, because the direct TLS handshake
will fail with old server versions. It can be enabled with the
sslnegotation=direct option. It will still fall back to the negotiated
TLS handshake if the server rejects the direct attempt, either because
it is an older version or the server doesn't support TLS at all, but
the fallback can be disabled with the sslnegotiation=requiredirect
option.
Author: Greg Stark, Heikki Linnakangas
Reviewed-by: Matthias van de Meent, Jacob Champion
This fixes the few corner cases noted in commit 705843d294, as shown
by the changes in the test.
Author: Heikki Linnakangas, Matthias van de Meent
Reviewed-by: Jacob Champion
Previously, libpq would establish the TCP connection, and then
immediately disconnect if the credentials were not available. The
same thing happened if you tried to use a Unix domain socket with
gssencmode=require. Check those conditions before establishing the TCP
connection.
This is a very minor issue, but my motivation to do this now is that
I'm about to add more detail to the tests for encryption negotiation.
This makes the case of gssencmode=require but no credentials
configured fail at the same stage as with gssencmode=require and
GSSAPI support not compiled at all. That avoids having to deal with
variations in expected output depending on build options.
Discussion: https://www.postgresql.org/message-id/CAEze2Wja8VUoZygCepwUeiCrWa4jP316k0mvJrOW4PFmWP0Tcw@mail.gmail.com
The existing PQcancel API uses blocking IO, which makes PQcancel
impossible to use in an event loop based codebase without blocking the
event loop until the call returns. It also doesn't encrypt the
connection over which the cancel request is sent, even when the original
connection required encryption.
This commit adds a PQcancelConn struct and assorted functions, which
provide a better mechanism of sending cancel requests; in particular all
the encryption used in the original connection are also used in the
cancel connection. The main entry points are:
- PQcancelCreate creates the PQcancelConn based on the original
connection (but does not establish an actual connection).
- PQcancelStart can be used to initiate non-blocking cancel requests,
using encryption if the original connection did so, which must be
pumped using
- PQcancelPoll.
- PQcancelReset puts a PQcancelConn back in state so that it can be
reused to send a new cancel request to the same connection.
- PQcancelBlocking is a simpler-to-use blocking API that still uses
encryption.
Additional functions are
- PQcancelStatus, mimicks PQstatus;
- PQcancelSocket, mimicks PQcancelSocket;
- PQcancelErrorMessage, mimicks PQerrorMessage;
- PQcancelFinish, mimicks PQfinish.
Author: Jelte Fennema-Nio <postgres@jeltef.nl>
Reviewed-by: Denis Laxalde <denis.laxalde@dalibo.com>
Discussion: https://postgr.es/m/AM5PR83MB0178D3B31CA1B6EC4A8ECC42F7529@AM5PR83MB0178.EURPRD83.prod.outlook.com
Fix pthread-win32.h and pthread-win32.c to provide a more complete
emulation of POSIX pthread mutexes: define PTHREAD_MUTEX_INITIALIZER
and make sure that pthread_mutex_lock() can operate on a mutex
object that's been initialized that way. Then we don't need the
duplicative platform-specific logic in default_threadlock() and
pgtls_init(), which we'd otherwise need yet a third copy of for
an upcoming bug fix.
Also, since default_threadlock() supposes that pthread_mutex_lock()
cannot fail, try to ensure that that's actually true, by getting
rid of the malloc call that was formerly involved in initializing
an emulated mutex. We can define an extra state for the spinlock
field instead.
Also, replace the similar code in ecpglib/misc.c with this version.
While ecpglib's version at least had a POSIX-compliant API, it
also had the potential of failing during mutex init (but here,
because of CreateMutex failure rather than malloc failure). Since
all of misc.c's callers ignore failures, it seems like a wise idea
to avoid failures here too.
A further improvement in this area could be to unify libpq's and
ecpglib's implementations into a src/port/pthread-win32.c file.
But that doesn't seem like a bug fix, so I'll desist for now.
In preparation for the aforementioned bug fix, back-patch to all
supported branches.
Discussion: https://postgr.es/m/264860.1707163416@sss.pgh.pa.us
In follow up commits we'll add more functions related to query
cancellations. This groups those all together instead of mixing them
with the other functions in fe-connect.c.
The formerly static parse_int_param() function had to be exported to
other libpq users, so it's been renamed pqParseIntParam() and moved to a
more reasonable place within fe-connect.c (rather than randomly between
various keepalive-related routines).
Author: Jelte Fennema-Nio <jelte.fennema@microsoft.com>
Discussion: https://postgr.es/m/AM5PR83MB0178D3B31CA1B6EC4A8ECC42F7529@AM5PR83MB0178.EURPRD83.prod.outlook.com
This commit introduces descriptively-named macros for the
identifiers used in wire protocol messages. These new macros are
placed in a new header file so that they can be easily used by
third-party code.
Author: Dave Cramer
Reviewed-by: Alvaro Herrera, Tatsuo Ishii, Peter Smith, Robert Haas, Tom Lane, Peter Eisentraut, Michael Paquier
Discussion: https://postgr.es/m/CADK3HHKbBmK-PKf1bPNFoMC%2BoBt%2BpD9PH8h5nvmBQskEHm-Ehw%40mail.gmail.com
All supported computers have either POSIX or Windows threads, and we no
longer have any automated testing of --disable-thread-safety. We define
a vestigial ENABLE_THREAD_SAFETY macro to 1 in ecpg_config.h in case it
is useful, but we no longer test it anywhere in PostgreSQL code, and
associated dead code paths are removed.
The Meson and perl-based Windows build scripts never had an equivalent
build option.
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/CA%2BhUKGLtmexrpMtxBRLCVePqV_dtWG-ZsEbyPrYc%2BNBB2TkNsw%40mail.gmail.com
That's how other boolean options are handled, so do likewise.
The previous coding with "enable" and "disable" was seemingly
modeled on gssencmode, but that's a three-way flag.
While at it, add PGGSSDELEGATION to the set of environment
variables cleared by pg_regress and Utils.pm.
Abhijit Menon-Sen, per gripe from Alvaro Herrera
Discussion: https://postgr.es/m/20230522091609.nlyuu4nolhycqs2p@alvherre.pgsql
Complete the task begun in 9c0a0e2ed: we don't want to use the
abbreviation "deleg" for GSS delegation in any user-visible places.
(For consistency, this also changes most internal uses too.)
Abhijit Menon-Sen and Tom Lane
Discussion: https://postgr.es/m/949048.1684639317@sss.pgh.pa.us
Run pgindent, pgperltidy, and reformat-dat-files.
This set of diffs is a bit larger than typical. We've updated to
pg_bsd_indent 2.1.2, which properly indents variable declarations that
have multi-line initialization expressions (the continuation lines are
now indented one tab stop). We've also updated to perltidy version
20230309 and changed some of its settings, which reduces its desire to
add whitespace to lines to make assignments etc. line up. Going
forward, that should make for fewer random-seeming changes to existing
code.
Discussion: https://postgr.es/m/20230428092545.qfb3y5wcu4cm75ur@alvherre.pgsql
The errormessage for an incorrect require_auth method wasn't using the
common "invalid %s value" errormessage which lessens the burden on our
translators. Fix by changing to that format to make use of existing
translations and to make error messages consistent in wording.
Reported and fixed by Gurjeet Singh with some tweaking by myself.
Author: Gurjeet Singh <gurjeet@singh.im>
Discussion: https://postgr.es/m/CABwTF4Xu3g9zohJ9obu8m7MKbf8g63NgpRDjwqPHQgAtB+Gb8Q@mail.gmail.com
This reverts commit 3d03b24c3 (Revert Add support for Kerberos
credential delegation) which was committed on the grounds of concern
about portability, but on further review and discussion, it's clear that
we are better off explicitly requiring MIT Kerberos as that appears to
be the only GSSAPI library currently that's under proper maintenance
and ongoing development. The API used for storing credentials was added
to MIT Kerberos over a decade ago while for the other libraries which
appear to be mainly based on Heimdal, which exists explicitly to be a
re-implementation of MIT Kerberos, the API never made it to a released
version (even though it was added to the Heimdal git repo over 5 years
ago..).
This post-feature-freeze change was approved by the RMT.
Discussion: https://postgr.es/m/ZDDO6jaESKaBgej0%40tamriel.snowman.net
This reverts commit 3d4fa227bc.
Per discussion and buildfarm, this depends on APIs that seem to not
be available on at least one platform (NetBSD). Should be certainly
possible to rework to be optional on that platform if necessary but bit
late for that at this point.
Discussion: https://postgr.es/m/3286097.1680922218@sss.pgh.pa.us
Support GSSAPI/Kerberos credentials being delegated to the server by a
client. With this, a user authenticating to PostgreSQL using Kerberos
(GSSAPI) credentials can choose to delegate their credentials to the
PostgreSQL server (which can choose to accept them, or not), allowing
the server to then use those delegated credentials to connect to
another service, such as with postgres_fdw or dblink or theoretically
any other service which is able to be authenticated using Kerberos.
Both postgres_fdw and dblink are changed to allow non-superuser
password-less connections but only when GSSAPI credentials have been
delegated to the server by the client and GSSAPI is used to
authenticate to the remote system.
Authors: Stephen Frost, Peifeng Qiu
Reviewed-By: David Christensen
Discussion: https://postgr.es/m/CO1PR05MB8023CC2CB575E0FAAD7DF4F8A8E29@CO1PR05MB8023.namprd05.prod.outlook.com
This adds a new option to libpq's sslrootcert, "system", which will load
the system trusted CA roots for certificate verification. This is a more
convenient way to achieve this than pointing to the system CA roots
manually since the location can differ by installation and be locally
adjusted by env vars in OpenSSL.
When sslrootcert is set to system, sslmode is forced to be verify-full
as weaker modes aren't providing much security for public CAs.
Changing the location of the system roots by setting environment vars is
not supported by LibreSSL so the tests will use a heuristic to determine
if the system being tested is LibreSSL or OpenSSL.
The workaround in .cirrus.yml is required to handle a strange interaction
between homebrew and the openssl@3 formula; hopefully this can be removed
in the near future.
The original patch was written by Thomas Habets, which was later revived
by Jacob Champion.
Author: Jacob Champion <jchampion@timescale.com>
Author: Thomas Habets <thomas@habets.se>
Reviewed-by: Jelte Fennema <postgres@jeltef.nl>
Reviewed-by: Andrew Dunstan <andrew@dunslane.net>
Reviewed-by: Magnus Hagander <magnus@hagander.net>
Discussion: https://www.postgresql.org/message-id/flat/CA%2BkHd%2BcJwCUxVb-Gj_0ptr3_KZPwi3%2B67vK6HnLFBK9MzuYrLA%40mail.gmail.com
The fallback seed for when pg_strong_random cannot generate a high
quality seed mixes in the address of the conn object, but the cast
failed to take the word size into consideration. Fix by casting to
a uintptr_t instead. The seed calculation was added in 7f5b19817e.
The code as it stood generated the following warning on mamba and
lapwing in the buildfarm:
fe-connect.c: In function 'libpq_prng_init':
fe-connect.c:1048:11: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
1048 | rseed = ((uint64) conn) ^
| ^
Author: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Discussion: https://postgr.es/m/TYAPR01MB58665250EDCD551CCA9AD117F58E9@TYAPR01MB5866.jpnprd01.prod.outlook.com
This adds support for load balancing connections with libpq using a
connection parameter: load_balance_hosts=<string>. When setting the
param to random, hosts and addresses will be connected to in random
order. This then results in load balancing across these addresses and
hosts when multiple clients or frequent connection setups are used.
The randomization employed performs two levels of shuffling:
1. The given hosts are randomly shuffled, before resolving them
one-by-one.
2. Once a host its addresses get resolved, the returned addresses
are shuffled, before trying to connect to them one-by-one.
Author: Jelte Fennema <postgres@jeltef.nl>
Reviewed-by: Aleksander Alekseev <aleksander@timescale.com>
Reviewed-by: Michael Banck <mbanck@gmx.net>
Reviewed-by: Andrey Borodin <amborodin86@gmail.com>
Discussion: https://postgr.es/m/PR3PR83MB04768E2FF04818EEB2179949F7A69@PR3PR83MB0476.EURPRD83.prod.outlook.
This refactors libpq to copy addrinfos returned by getaddrinfo to
memory owned by libpq such that future improvements can alter for
example the order of entries.
As a nice side effect of this refactor the mechanism for iteration
over addresses in PQconnectPoll is now identical to its iteration
over hosts.
Author: Jelte Fennema <postgres@jeltef.nl>
Reviewed-by: Aleksander Alekseev <aleksander@timescale.com>
Reviewed-by: Michael Banck <mbanck@gmx.net>
Reviewed-by: Andrey Borodin <amborodin86@gmail.com>
Discussion: https://postgr.es/m/PR3PR83MB04768E2FF04818EEB2179949F7A69@PR3PR83MB0476.EURPRD83.prod.outlook.com
Replace the hardcoded value with a GUC such that the iteration
count can be raised in order to increase protection against
brute-force attacks. The hardcoded value for SCRAM iteration
count was defined to be 4096, which is taken from RFC 7677, so
set the default for the GUC to 4096 to match. In RFC 7677 the
recommendation is at least 15000 iterations but 4096 is listed
as a SHOULD requirement given that it's estimated to yield a
0.5s processing time on a mobile handset of the time of RFC
writing (late 2015).
Raising the iteration count of SCRAM will make stored passwords
more resilient to brute-force attacks at a higher computational
cost during connection establishment. Lowering the count will
reduce computational overhead during connections at the tradeoff
of reducing strength against brute-force attacks.
There are however platforms where even a modest iteration count
yields a too high computational overhead, with weaker password
encryption schemes chosen as a result. In these situations,
SCRAM with a very low iteration count still gives benefits over
weaker schemes like md5, so we allow the iteration count to be
set to one at the low end.
The new GUC is intentionally generically named such that it can
be made to support future SCRAM standards should they emerge.
At that point the value can be made into key:value pairs with
an undefined key as a default which will be backwards compatible
with this.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Jonathan S. Katz <jkatz@postgresql.org>
Discussion: https://postgr.es/m/F72E7BC7-189F-4B17-BF47-9735EB72C364@yesql.se
The sslcertmode option controls whether the server is allowed and/or
required to request a certificate from the client. There are three
modes:
- "allow" is the default and follows the current behavior, where a
configured client certificate is sent if the server requests one
(via one of its default locations or sslcert). With the current
implementation, will happen whenever TLS is negotiated.
- "disable" causes the client to refuse to send a client certificate
even if sslcert is configured or if a client certificate is available in
one of its default locations.
- "require" causes the client to fail if a client certificate is never
sent and the server opens a connection anyway. This doesn't add any
additional security, since there is no guarantee that the server is
validating the certificate correctly, but it may helpful to troubleshoot
more complicated TLS setups.
sslcertmode=require requires SSL_CTX_set_cert_cb(), available since
OpenSSL 1.0.2. Note that LibreSSL does not include it.
Using a connection parameter different than require_auth has come up as
the simplest design because certificate authentication does not rely
directly on any of the AUTH_REQ_* codes, and one may want to require a
certificate to be sent in combination of a given authentication method,
like SCRAM-SHA-256.
TAP tests are added in src/test/ssl/, some of them relying on sslinfo to
check if a certificate has been set. These are compatible across all
the versions of OpenSSL supported on HEAD (currently down to 1.0.1).
Author: Jacob Champion
Reviewed-by: Aleksander Alekseev, Peter Eisentraut, David G. Johnston,
Michael Paquier
Discussion: https://postgr.es/m/9e5a8ccddb8355ea9fa4b75a1e3a9edc88a70cd3.camel@vmware.com
The same error message will be used for a different option, to be
introduced in a separate patch. Reshaping the error message as done
here saves in translation.
Extracted from a larger patch by the same author.
Author: Jacob Champion
Discussion: https://postgr.es/m/9e5a8ccddb8355ea9fa4b75a1e3a9edc88a70cd3.camel@vmware.com
Since commit 7627b91cd5, libpq has used FD_CLOEXEC so that sockets
wouldn't be leaked to subprograms. With enough bad luck, a
multi-threaded program might fork in between the socket() and fcntl()
calls. We can close that tiny gap by using SOCK_CLOEXEC instead of a
separate call. While here, we might as well do the same for
SOCK_NONBLOCK, to save another syscall.
These flags are expected to appear in the next revision of the POSIX
standard, specifically to address this problem. Our Unixoid targets
except macOS and AIX have had them for a long time, and macOS would
hopefully use guarded availability to roll them out, so it seems enough
to use a simple ifdef test for availability until we hear otherwise.
Windows doesn't have them, but has non-inheritable sockets by default.
Discussion: https://postgr.es/m/CA%2BhUKGKb6FsAdQWcRL35KJsftv%2B9zXqQbzwkfRf1i0J2e57%2BhQ%40mail.gmail.com
Support for SCM credential authentication has been removed in the
backend in 9.1, and libpq has kept some code to handle it for
compatibility.
Commit be4585b, that did the cleanup of the backend code, has done
so because the code was not really portable originally. And, as there
are likely little chances that this is used these days, this removes the
remaining code from libpq. An error will now be raised by libpq if
attempting to connect to a server that returns AUTH_REQ_SCM_CREDS,
instead.
References to SCM credential authentication are removed from the
protocol documentation. This removes some meson and configure checks.
Author: Michael Paquier
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/ZBLH8a4otfqgd6Kn@paquier.xyz
The new connection parameter require_auth allows a libpq client to
define a list of comma-separated acceptable authentication types for use
with the server. There is no negotiation: if the server does not
present one of the allowed authentication requests, the connection
attempt done by the client fails.
The following keywords can be defined in the list:
- password, for AUTH_REQ_PASSWORD.
- md5, for AUTH_REQ_MD5.
- gss, for AUTH_REQ_GSS[_CONT].
- sspi, for AUTH_REQ_SSPI and AUTH_REQ_GSS_CONT.
- scram-sha-256, for AUTH_REQ_SASL[_CONT|_FIN].
- creds, for AUTH_REQ_SCM_CREDS (perhaps this should be removed entirely
now).
- none, to control unauthenticated connections.
All the methods that can be defined in the list can be negated, like
"!password", in which case the server must NOT use the listed
authentication type. The special method "none" allows/disallows the use
of unauthenticated connections (but it does not govern transport-level
authentication via TLS or GSSAPI).
Internally, the patch logic is tied to check_expected_areq(), that was
used for channel_binding, ensuring that an incoming request is
compatible with conn->require_auth. It also introduces a new flag,
conn->client_finished_auth, which is set by various authentication
routines when the client side of the handshake is finished. This
signals to check_expected_areq() that an AUTH_REQ_OK from the server is
expected, and allows the client to complain if the server bypasses
authentication entirely, with for example the reception of a too-early
AUTH_REQ_OK message.
Regression tests are added in authentication TAP tests for all the
keywords supported (except "creds", because it is around only for
compatibility reasons). A new TAP script has been added for SSPI, as
there was no script dedicated to it yet. It relies on SSPI being the
default authentication method on Windows, as set by pg_regress.
Author: Jacob Champion
Reviewed-by: Peter Eisentraut, David G. Johnston, Michael Paquier
Discussion: https://postgr.es/m/9e5a8ccddb8355ea9fa4b75a1e3a9edc88a70cd3.camel@vmware.com
The error cases for TLS and GSS encryption were inconsistent. After TLS
fails, the connection is marked as dead and follow-up calls of
PQconnectPoll() would return immediately, but GSS encryption was not
doing that, so the connection would still have been allowed to enter the
GSS handling code. This was handled incorrectly when gssencmode was set
to "require". "prefer" was working correctly, and this could not happen
under "disable" as GSS encryption would not be attempted.
This commit makes the error handling of GSS encryption on par with TLS
portion, fixing the case of gssencmode=require.
Reported-by: Jacob Champion
Author: Michael Paquier
Reviewed-by: Jacob Champion, Stephen Frost
Discussion: https://postgr.es/m/23787477-5fe1-a161-6d2a-e459f74c4713@timescale.com
Backpatch-through: 12
A patch sent by Jacob Champion has been touching this area of the code,
and the set of changes done in a9e9a9f has made a run of pgindent on
these files a bit annoying to handle. So let's clean up a bit the area,
first, to ease the work on follow-up patches.
Discussion: https://postgr.es/m/9e5a8ccddb8355ea9fa4b75a1e3a9edc88a70cd3.camel@vmware.com
A couple of code paths in CONNECTION_AWAITING_RESPONSE will eagerly read
bytes off a connection that should be closed. Don't let a misbehaving
server chew up client resources here; a v2 error can't be infinitely
long, and a v3 error should be bounded by its original message length.
For the existing error_return cases, I added some additional error
messages for symmetry with the new ones, and cleaned up some message
rot.
Author: Jacob Champion
Discussion: https://www.postgresql.org/message-id/8e729daf-7d71-6965-9687-8bc0630599b3%40timescale.com
Before, receiving a NegotiateProtocolVersion message would result in a
confusing error message like
expected authentication request from server, but received v
This adds proper handling of this protocol message and produces an
on-topic error message from it.
Reviewed-by: Jacob Champion <jchampion@timescale.com>
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/f9c7862f-b864-8ef7-a861-c4638c83e209%40enterprisedb.com
After sending a startup message, libpq expects either an error
response ('E') or an authentication request ('R'). Before processing
the message, it ensures it has read enough bytes to correspond to the
length specified in the message. However, when processing the 'R'
message, if an EOF status is returned it loops back waiting for more
input, even though we already checked that we have enough input. In
this particular case, this is probably not reachable anyway, because
other code ensures we have enough bytes for an authentication request
message, but the code is wrong and misleading. In the more general
case, processing a faulty message could result in an EOF status, which
would then result in an infinite loop waiting for the end of a message
that will never come. The correction is to make this an error.
Reported-by: Jacob Champion <jchampion@timescale.com>
Discussion: https://www.postgresql.org/message-id/flat/f9c7862f-b864-8ef7-a861-c4638c83e209@enterprisedb.com
Make sure that function declarations use names that exactly match the
corresponding names from function definitions in optimizer, parser,
utility, libpq, and "commands" code, as well as in remaining library
code. Do the same for all code related to frontend programs (with the
exception of pg_dump/pg_dumpall related code).
Like other recent commits that cleaned up function parameter names, this
commit was written with help from clang-tidy. Later commits will handle
ecpg and pg_dump/pg_dumpall.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznJt9CMM9KJTMjJh_zbL5hD9oX44qdJ4aqZtjFi-zA3Tg@mail.gmail.com
SUSv3 <netinet/in.h> defines struct sockaddr_in6, and all targeted Unix
systems have it. Windows has it in <ws2ipdef.h>. Remove the configure
probe, the macro and a small amount of dead code.
Also remove a mention of IPv6-less builds from the documentation, since
there aren't any.
This is similar to commits f5580882 and 077bf2f2 for Unix sockets. Even
though AF_INET6 is an "optional" component of SUSv3, there are no known
modern operating system without it, and it seems even less likely to be
omitted from future systems than AF_UNIX.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA+hUKGKErNfhmvb_H0UprEmp4LPzGN06yR2_0tYikjzB-2ECMw@mail.gmail.com
SUSv3, all targeted Unixes and modern Windows have getaddrinfo() and
related interfaces. Drop the replacement implementation, and adjust
some headers slightly to make sure that the APIs are visible everywhere
using standard POSIX headers and names.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CA%2BhUKG%2BL_3brvh%3D8e0BW_VfX9h7MtwgN%3DnFHP5o7X2oZucY9dg%40mail.gmail.com
Since HAVE_UNIX_SOCKETS is now defined unconditionally, remove the macro
and drop a small amount of dead code.
The last known systems not to have them (as far as I know at least) were
QNX, which we de-supported years ago, and Windows, which now has them.
If a new OS ever shows up with the POSIX sockets API but without working
AF_UNIX, it'll presumably still be able to compile the code, and fail at
runtime with an unsupported address family error. We might want to
consider adding a HINT that you should turn off the option to use it if
your network stack doesn't support it at that point, but it doesn't seem
worth making the relevant code conditional at compile time.
Also adjust a couple of places in the docs and comments that referred to
builds without Unix-domain sockets, since there aren't any. Windows
still gets a special mention in those places, though, because we don't
try to use them by default there yet.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/CA%2BhUKG%2BL_3brvh%3D8e0BW_VfX9h7MtwgN%3DnFHP5o7X2oZucY9dg%40mail.gmail.com
Daniel Gustafsson
Heikki Linnakangas
Alvaro Herrera
Tom Lane
Bruce Momjian
Nathan Bossart
Thomas Munro
Peter Eisentraut
Stephen Frost
Michael Paquier
Peter Geoghegan