Upcoming changes introduce further types of tuple table slots, in
preparation of making table storage pluggable. New storage methods
will have different representation of tuples, therefore the slot
accessor should refer explicitly to heap tuples.
Instead of just renaming the functions, split it into one function
that accepts heap tuples not residing in buffers, and one accepting
ones in buffers. Previously one function was used for both, but that
was a bit awkward already, and splitting will allow us to represent
slot types for tuples in buffers and normal memory separately.
This is split out from the patch introducing abstract slots, as this
largely consists out of mechanical changes.
Author: Ashutosh Bapat
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/20180220224318.gw4oe5jadhpmcdnm@alap3.anarazel.de
The impact of VARIADIC on the combine/serialize/deserialize support
functions of an aggregate wasn't thought through carefully. There is
actually no impact, because variadicity isn't passed through to these
functions (and it doesn't seem like it would need to be). However,
lookup_agg_function was mistakenly told to check things as though it were
passed through. The net result was that it was impossible to declare an
aggregate that had both VARIADIC input and parallelism support functions.
In passing, fix a runtime check in nodeAgg.c for the combine function's
strictness to make its error message agree with the creation-time check.
The previous message was actually backwards, and it doesn't seem like
there's a good reason to have two versions of this message text anyway.
Back-patch to 9.6 where parallel aggregation was introduced.
Alexey Bashtanov; message fix by me
Discussion: https://postgr.es/m/f86dde87-fef4-71eb-0480-62754aaca01b@imap.cc
The reason for doing so is that it will allow expression evaluation to
optimize based on the underlying tupledesc. In particular it will
allow to JIT tuple deforming together with the expression itself.
For that expression initialization needs to be moved after the
relevant slots are initialized - mostly unproblematic, except in the
case of nodeWorktablescan.c.
After doing so there's no need for ExecAssignResultType() and
ExecAssignResultTypeFromTL() anymore, as all former callers have been
converted to create a slot with a fixed descriptor.
When creating a slot with a fixed descriptor, tts_values/isnull can be
allocated together with the main slot, reducing allocation overhead
and increasing cache density a bit.
Author: Andres Freund
Discussion: https://postgr.es/m/20171206093717.vqdxe5icqttpxs3p@alap3.anarazel.de
This has a performance benefit on own, although not hugely so. The
primary benefit is that it will allow for to JIT tuple deforming and
comparator invocations.
Large parts of this were previously committed (773aec7aa), but the
commit contained an omission around cross-type comparisons and was
thus reverted.
Author: Andres Freund
Discussion: https://postgr.es/m/20171129080934.amqqkke2zjtekd4t@alap3.anarazel.de
This reverts commit 773aec7aa9.
There's an unresolved issue in the reverted commit: It only creates
one comparator function, but in for the nodeSubplan.c case we need
more (c.f. FindTupleHashEntry vs LookupTupleHashEntry calls in
nodeSubplan.c).
This isn't too difficult to fix, but it's not entirely trivial
either. The fact that the issue only causes breakage on 32bit systems
shows that the current test coverage isn't that great. To avoid
turning half the buildfarm red till those two issues are addressed,
revert.
To make this work, tuplesort.c and logtape.c must also support
parallelism, so this patch adds that infrastructure and then applies
it to the particular case of parallel btree index builds. Testing
to date shows that this can often be 2-3x faster than a serial
index build.
The model for deciding how many workers to use is fairly primitive
at present, but it's better than not having the feature. We can
refine it as we get more experience.
Peter Geoghegan with some help from Rushabh Lathia. While Heikki
Linnakangas is not an author of this patch, he wrote other patches
without which this feature would not have been possible, and
therefore the release notes should possibly credit him as an author
of this feature. Reviewed by Claudio Freire, Heikki Linnakangas,
Thomas Munro, Tels, Amit Kapila, me.
Discussion: http://postgr.es/m/CAM3SWZQKM=Pzc=CAHzRixKjp2eO5Q0Jg1SoFQqeXFQ647JiwqQ@mail.gmail.com
Discussion: http://postgr.es/m/CAH2-Wz=AxWqDoVvGU7dq856S4r6sJAj6DBn7VMtigkB33N5eyg@mail.gmail.com
AclObjectKind was basically just another enumeration for object types,
and we already have a preferred one for that. It's only used in
aclcheck_error. By using ObjectType instead, we can also give some more
precise error messages, for example "index" instead of "relation".
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Previously aggregate transition and combination functions were invoked
by special case code in nodeAgg.c, evaluating input and filters
separately using the expression evaluation machinery. That turns out
to not be great for performance for several reasons:
- repeated expression evaluations have some cost
- the transition functions invocations are poorly predicted, as
commonly there are multiple aggregates in a query, resulting in the
same call-stack invoking different functions.
- filter and input computation had to be done separately
- the special case code made it hard to implement JITing of the whole
transition function invocation
Address this by building one large expression that computes input,
evaluates filters, and invokes transition functions.
This leads to moderate speedups in queries bottlenecked by aggregate
computations, and enables large speedups for similar cases once JITing
is done.
There's potential for further improvement:
- It'd be nice if we could simplify the somewhat expensive
aggstate->all_pergroups lookups.
- right now there's still an advance_transition_function invocation in
nodeAgg.c, leading to some code duplication.
Author: Andres Freund
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
Previously aggregate transition values for hash and other forms of
aggregation (i.e. sort and no group by) were represented
differently. Hash based aggregation used a grouping set indexed array
pointing to an array of transition values, whereas other forms of
aggregation used one flattened array with the index being computed out
of grouping set and transition offsets.
That made upcoming changes hard, so represent both as grouping set
indexed array of per-group data.
As a nice side-effect this also makes aggregation slightly faster,
because computing offsets with `transno + (setno * numTrans)` turns
out not to be that cheap (too big for x86 lea for example).
Author: Andres Freund
Discussion: https://postgr.es/m/20171128003121.nmxbm2ounxzb6n2t@alap3.anarazel.de
When strict aggregate combine functions, used in multi-stage/parallel
aggregation, returned NULL, we didn't check for that, invoking the
combine function with NULL the next round, despite it being strict.
The equivalent code invoking normal transition functions has a check
for that situation, which did not get copied in a7de3dc5c3. Fix the
bug by adding the equivalent check.
Based on a quick look I could not find any strict combine functions in
core actually returning NULL, and it doesn't seem very likely external
users have done so. So this isn't likely to have caused issues in
practice.
Add tests verifying transition / combine functions returning NULL is
tested.
Reported-By: Andres Freund
Author: Andres Freund
Discussion: https://postgr.es/m/20171121033642.7xvmjqrl4jdaaat3@alap3.anarazel.de
Backpatch: 9.6, where parallel aggregation was introduced
The lower case spellings are C and C++ standard and are used in most
parts of the PostgreSQL sources. The upper case spellings are only used
in some files/modules. So standardize on the standard spellings.
The APIs for ICU, Perl, and Windows define their own TRUE and FALSE, so
those are left as is when using those APIs.
In code comments, we use the lower-case spelling for the C concepts and
keep the upper-case spelling for the SQL concepts.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
There is no reason to insist that direct arguments must match before
we can merge transition states of two aggregate calls. They're only
used during the finalfn call, so we can treat them as like the finalfn
itself. This allows, eg, merging of
select
percentile_cont(0.25) within group (order by a),
percentile_disc(0.5) within group (order by a)
from ...
This didn't matter (and could not have been tested) before we allowed
state merging of OSAs otherwise.
Discussion: https://postgr.es/m/CAB4ELO5RZhOamuT9Xsf72ozbenDLLXZKSk07FiSVsuJNZB861A@mail.gmail.com
The built-in OSAs all share the same transition function, so they can
share transition state as long as the final functions cooperate to not
do the sort step more than once. To avoid running the tuplesort object
in randomAccess mode unnecessarily, add a bit of infrastructure to
nodeAgg.c to let the aggregate functions find out whether the transition
state is actually being shared or not.
This doesn't work for the hypothetical aggregates, since those inject
a hypothetical row that isn't traceable to the shared input state.
So they remain marked aggfinalmodify = 'w'.
Discussion: https://postgr.es/m/CAB4ELO5RZhOamuT9Xsf72ozbenDLLXZKSk07FiSVsuJNZB861A@mail.gmail.com
An aggregate's input expression(s) are not supposed to be evaluated
at all for a row where its FILTER test fails ... but commit 8ed3f11bb
overlooked that requirement. Reshuffle so that aggregates having a
filter clause evaluate their arguments separately from those without.
This still gets the benefit of doing only one ExecProject in the
common case of multiple Aggrefs, none of which have filters.
While at it, arrange for filter clauses to be included in the common
ExecProject evaluation, thus perhaps buying a little bit even when
there are filters.
Back-patch to v10 where the bug was introduced.
Discussion: https://postgr.es/m/30065.1508161354@sss.pgh.pa.us
While poking around in the aggregate logic, I noticed that commit
8ed3f11bb broke the logic in nodeAgg.c that purports to detect nested
aggregates, by moving initialization of regular aggregate argument
expressions out of the code segment that checks for that.
You could argue that this check is unnecessary, but it's not much code
so I'm inclined to keep it as a backstop against parser and planner
bugs. However, there's certainly zero value in checking only some of
the subexpressions.
We can make the check complete again, and as a bonus make it a good
deal more bulletproof against future mistakes of the same ilk, by
moving it out to the outermost level of ExecInitAgg. This means we
need to check only once per Agg node not once per aggregate, which
also seems like a good thing --- if the check does find something
wrong, it's not urgent that we report it before the plan node
initialization finishes.
Since this requires remembering the original length of the aggs list,
I deleted a long-obsolete stanza that changed numaggs from 0 to 1.
That's so old it predates our decision that palloc(0) is a valid
operation, in (digs...) 2004, see commit 24a1e20f1.
In passing improve a few comments.
Back-patch to v10, just in case.
Up to now, there's been hard-wired assumptions that normal aggregates'
final functions never modify their transition states, while ordered-set
aggregates' final functions always do. This has always been a bit
limiting, and in particular it's getting in the way of improving the
built-in ordered-set aggregates to allow merging of transition states.
Therefore, let's introduce catalog and CREATE AGGREGATE infrastructure
that lets the finalfn's behavior be declared explicitly.
There are now three possibilities for the finalfn behavior: it's purely
read-only, it trashes the transition state irrecoverably, or it changes
the state in such a way that no more transfn calls are possible but the
state can still be passed to other, compatible finalfns. There are no
examples of this third case today, but we'll shortly make the built-in
OSAs act like that.
This change allows user-defined aggregates to explicitly disclaim support
for use as window functions, and/or to prevent transition state merging,
if their implementations cannot handle that. While it was previously
possible to handle the window case with a run-time error check, there was
not any way to prevent transition state merging, which in retrospect is
something commit 804163bc2 should have provided for. But better late
than never.
In passing, split out pg_aggregate.c's extern function declarations into
a new header file pg_aggregate_fn.h, similarly to what we've done for
some other catalog headers, so that pg_aggregate.h itself can be safe
for frontend files to include. This lets pg_dump use the symbolic
names for relevant constants.
Discussion: https://postgr.es/m/4834.1507849699@sss.pgh.pa.us
If we merge the transition calculations for two different aggregates,
it's reasonable to assume that the transition function should not care
which of those Aggref structs it gets from AggGetAggref(). It is not
reasonable to make the same assumption about an aggregate final function,
however. Commit 804163bc2 broke this, as it will pass whichever Aggref
was first associated with the transition state in both cases.
This doesn't create an observable bug so far as the core system is
concerned, because the only existing uses of AggGetAggref() are in
ordered-set aggregates that happen to not pay attention to anything
but the input properties of the Aggref; and besides that, we disabled
sharing of transition calculations for OSAs yesterday. Nonetheless,
if some third-party code were using AggGetAggref() in a normal aggregate,
they would be entitled to call this a bug. Hence, back-patch the fix
to 9.6 where the problem was introduced.
In passing, improve some of the comments about transition state sharing.
Discussion: https://postgr.es/m/CAB4ELO5RZhOamuT9Xsf72ozbenDLLXZKSk07FiSVsuJNZB861A@mail.gmail.com
This ought to work, but the built-in OSAs are not capable of coping,
because their final-functions destructively modify their transition
state (specifically, the contained tuplesort object). That was fine
when those functions were written, but commit 804163bc2 moved the
goalposts without telling orderedsetaggs.c.
We should fix the built-in OSAs to support this, but it will take
a little work, especially if we don't want to sacrifice performance
in the normal non-shared-state case. Given that it took a year after
9.6 release for anyone to notice this bug, we should not prioritize
sharable-state over nonsharable-state performance. And a proper fix
is likely to be more complicated than we'd want to back-patch, too.
Therefore, let's just put in this stop-gap patch to prevent nodeAgg.c
from choosing to use shared state for OSAs. We can revert it in HEAD
when we get a better fix.
Report from Lukas Eder, diagnosis by me, patch by David Rowley.
Back-patch to 9.6 where the problem was introduced.
Discussion: https://postgr.es/m/CAB4ELO5RZhOamuT9Xsf72ozbenDLLXZKSk07FiSVsuJNZB861A@mail.gmail.com
This is a mechanical change in preparation for a later commit that
will change the layout of TupleDesc. Introducing a macro to abstract
the details of where attributes are stored will allow us to change
that in separate step and revise it in future.
Author: Thomas Munro, editorialized by Andres Freund
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/CAEepm=0ZtQ-SpsgCyzzYpsXS6e=kZWqk3g5Ygn3MDV7A8dabUA@mail.gmail.com
This allows us to add stack-depth checks the first time an executor
node is called, and skip that overhead on following
calls. Additionally it yields a nice speedup.
While it'd probably have been a good idea to have that check all
along, it has become more important after the new expression
evaluation framework in b8d7f053c5 - there's no stack depth
check in common paths anymore now. We previously relied on
ExecEvalExpr() being executed somewhere.
We should move towards that model for further routines, but as this is
required for v10, it seems better to only do the necessary (which
already is quite large).
Author: Andres Freund, Tom Lane
Reported-By: Julien Rouhaud
Discussion:
https://postgr.es/m/22833.1490390175@sss.pgh.pa.ushttps://postgr.es/m/b0af9eaa-130c-60d0-9e4e-7a135b1e0c76@dalibo.com
In a followup commit ExecProcNode(), and especially the large switch
it contains, will largely be replaced by a function pointer directly
to the correct node. The node functions will then get invoked by a
thin inline function wrapper. To avoid having to include miscadmin.h
in headers - CHECK_FOR_INTERRUPTS() - move the interrupt checks into
the individual executor routines.
While looking through all executor nodes, I noticed a number of
arguably missing interrupt checks, add these too.
Author: Andres Freund, Tom Lane
Reviewed-By: Tom Lane
Discussion:
https://postgr.es/m/22833.1490390175@sss.pgh.pa.us
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4d wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
The new indent version includes numerous fixes thanks to Piotr Stefaniak.
The main changes visible in this commit are:
* Nicer formatting of function-pointer declarations.
* No longer unexpectedly removes spaces in expressions using casts,
sizeof, or offsetof.
* No longer wants to add a space in "struct structname *varname", as
well as some similar cases for const- or volatile-qualified pointers.
* Declarations using PG_USED_FOR_ASSERTS_ONLY are formatted more nicely.
* Fixes bug where comments following declarations were sometimes placed
with no space separating them from the code.
* Fixes some odd decisions for comments following case labels.
* Fixes some cases where comments following code were indented to less
than the expected column 33.
On the less good side, it now tends to put more whitespace around typedef
names that are not listed in typedefs.list. This might encourage us to
put more effort into typedef name collection; it's not really a bug in
indent itself.
There are more changes coming after this round, having to do with comment
indentation and alignment of lines appearing within parentheses. I wanted
to limit the size of the diffs to something that could be reviewed without
one's eyes completely glazing over, so it seemed better to split up the
changes as much as practical.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
This extends the castNode() notation introduced by commit 5bcab1114 to
provide, in one step, extraction of a list cell's pointer and coercion to
a concrete node type. For example, "lfirst_node(Foo, lc)" is the same
as "castNode(Foo, lfirst(lc))". Almost half of the uses of castNode
that have appeared so far include a list extraction call, so this is
pretty widely useful, and it saves a few more keystrokes compared to the
old way.
As with the previous patch, back-patch the addition of these macros to
pg_list.h, so that the notation will be available when back-patching.
Patch by me, after an idea of Andrew Gierth's.
Discussion: https://postgr.es/m/14197.1491841216@sss.pgh.pa.us
Add a "copy" argument to make it optional to receive a copy of caller
tuple that is safe to use following a subsequent manipulating of
tuplesort's state. This is a performance optimization. Most existing
tuplesort_gettupleslot() callers are made to opt out of copying.
Existing callers that happen to rely on the validity of tuple memory
beyond subsequent manipulations of the tuplesort request their own
copy.
This brings tuplesort_gettupleslot() in line with
tuplestore_gettupleslot(). In the future, a "copy"
tuplesort_getdatum() argument may be added, that similarly allows
callers to opt out of receiving their own copy of tuple.
In passing, clarify assumptions that callers of other tuplesort fetch
routines may make about tuple memory validity, per gripe from Tom
Lane.
Author: Peter Geoghegan
Discussion: CAM3SWZQWZZ_N=DmmL7tKy_OUjGH_5mN=N=A6h7kHyyDvEhg2DA@mail.gmail.com
This extends the Aggregate node with two new features: HashAggregate
can now run multiple hashtables concurrently, and a new strategy
MixedAggregate populates hashtables while doing sorted grouping.
The planner will now attempt to save as many sorts as possible when
planning grouping sets queries, while not exceeding work_mem for the
estimated combined sizes of all hashtables used. No SQL-level changes
are required. There should be no user-visible impact other than the
new EXPLAIN output and possible changes to result ordering when ORDER
BY was not used (which affected a few regression tests). The
enable_hashagg option is respected.
Author: Andrew Gierth
Reviewers: Mark Dilger, Andres Freund
Discussion: https://postgr.es/m/87vatszyhj.fsf@news-spur.riddles.org.uk
This replaces the old, recursive tree-walk based evaluation, with
non-recursive, opcode dispatch based, expression evaluation.
Projection is now implemented as part of expression evaluation.
This both leads to significant performance improvements, and makes
future just-in-time compilation of expressions easier.
The speed gains primarily come from:
- non-recursive implementation reduces stack usage / overhead
- simple sub-expressions are implemented with a single jump, without
function calls
- sharing some state between different sub-expressions
- reduced amount of indirect/hard to predict memory accesses by laying
out operation metadata sequentially; including the avoidance of
nearly all of the previously used linked lists
- more code has been moved to expression initialization, avoiding
constant re-checks at evaluation time
Future just-in-time compilation (JIT) has become easier, as
demonstrated by released patches intended to be merged in a later
release, for primarily two reasons: Firstly, due to a stricter split
between expression initialization and evaluation, less code has to be
handled by the JIT. Secondly, due to the non-recursive nature of the
generated "instructions", less performance-critical code-paths can
easily be shared between interpreted and compiled evaluation.
The new framework allows for significant future optimizations. E.g.:
- basic infrastructure for to later reduce the per executor-startup
overhead of expression evaluation, by caching state in prepared
statements. That'd be helpful in OLTPish scenarios where
initialization overhead is measurable.
- optimizing the generated "code". A number of proposals for potential
work has already been made.
- optimizing the interpreter. Similarly a number of proposals have
been made here too.
The move of logic into the expression initialization step leads to some
backward-incompatible changes:
- Function permission checks are now done during expression
initialization, whereas previously they were done during
execution. In edge cases this can lead to errors being raised that
previously wouldn't have been, e.g. a NULL array being coerced to a
different array type previously didn't perform checks.
- The set of domain constraints to be checked, is now evaluated once
during expression initialization, previously it was re-built
every time a domain check was evaluated. For normal queries this
doesn't change much, but e.g. for plpgsql functions, which caches
ExprStates, the old set could stick around longer. The behavior
around might still change.
Author: Andres Freund, with significant changes by Tom Lane,
changes by Heikki Linnakangas
Reviewed-By: Tom Lane, Heikki Linnakangas
Discussion: https://postgr.es/m/20161206034955.bh33paeralxbtluv@alap3.anarazel.de
Since 69f4b9c plain expression evaluation (and thus normal projection)
can't return sets of tuples anymore. Thus remove code dealing with
that possibility.
This will require adjustments in external code using
ExecEvalExpr()/ExecProject() - that should neither be hard nor very
common.
Author: Andres Freund and Tom Lane
Discussion: https://postgr.es/m/20160822214023.aaxz5l4igypowyri@alap3.anarazel.de
This commit purported to use a variable hash seed for Partial
HashAggregate, but actually did the opposite - it made us use a
variable seed for any HashAggregate that is NOT partial. Woops.
aggstate->evalproj is always set up by ExecInitAgg, so there's no
need to test. Doing so led Coverity to think that we might be
intending "slot" to be possibly NULL here, and it quite properly
complained that the rest of combine_aggregates() wasn't prepared
for that.
Also fix a couple of obvious thinkos in Asserts checking that
"inputoff" isn't past the end of the slot.
Errors introduced in commit 8ed3f11bb, so no need for back-patch.
If a query contained two aggregates that could share the transition value,
we would correctly collect the input into a tuplesort only once, but
incorrectly run the transition function over the accumulated input twice,
in finalize_aggregates(). That caused a crash, when we tried to call
tuplesort_performsort() on an already-freed NULL tuplestore.
Backport to 9.6, where sharing of transition state and this bug were
introduced.
Analysis by Tom Lane.
Discussion: https://www.postgresql.org/message-id/ac5b0b69-744c-9114-6218-8300ac920e61@iki.fi
Commit 5dfc198146 introduced the use
of a new type of hash table with linear reprobing for hash aggregates.
Such a hash table behaves very poorly if keys are inserted in hash
order, which does in fact happen in the case where a query use a
Finalize HashAggregate node fed (via Gather) by a Partial
HashAggregate node. In fact, queries with this type of plan tend
to run effectively forever.
Fix that by seeding the hash value differently in each worker
(and in the leader, if it participates).
Andres Freund and Robert Haas
So far the hashtable stored representative tuples in the form of its
input slot, with all columns in the hashtable that are not
needed (i.e. not grouped upon or functionally dependent) set to NULL.
Thats good for saving memory, but it turns out that having tuples full
of NULL isn't free. slot_deform_tuple is faster if there's no NULL
bitmap even if no NULLs are encountered, and skipping over leading NULLs
isn't free.
So compute a separate tuple descriptor that only contains the needed
columns. As columns have already been moved in/out the slot for the
hashtable that does not imply additional per-row overhead.
Author: Andres Freund
Reviewed-By: Heikki Linnakangas
Discussion: https://postgr.es/m/20161103110721.h5i5t5saxfk5eeik@alap3.anarazel.de
Previously we did a ExecProject() for each individual aggregate
argument. That turned out to be a performance bottleneck in queries with
multiple aggregates.
Doing all the argument computations in one ExecProject() is quite a bit
cheaper because ExecProject's fastpath can do the work at once in a
relatively tight loop, and because it can get all the required columns
with a single slot_getsomeattr and save some other redundant setup
costs.
Author: Andres Freund
Reviewed-By: Heikki Linnakangas
Discussion: https://postgr.es/m/20161103110721.h5i5t5saxfk5eeik@alap3.anarazel.de
In the previous coding, if an aggregate's transition function returned an
expanded array, nodeAgg.c and nodeWindowAgg.c would always copy it and thus
force it into the flat representation. This led to ping-ponging between
flat and expanded formats, which costs a lot. For an aggregate using
array_append as transition function, I measured about a 15X slowdown
compared to the pre-9.5 code, when working on simple int[] arrays.
Of course, the old code was already O(N^2) in this usage due to copying
flat arrays all the time, but it wasn't quite this inefficient.
To fix, teach nodeAgg.c and nodeWindowAgg.c to allow expanded transition
values without copying, so long as the transition function takes care to
return the transition value already properly parented under the aggcontext.
That puts a bit of extra responsibility on the transition function, but
doing it this way allows us to not need any extra logic in the fast path
of advance_transition_function (ie, with a pass-by-value transition value,
or with a modified-in-place pass-by-reference value). We already know
that that's a hot spot so I'm loath to add any cycles at all there. Also,
while only array_append currently knows how to follow this convention,
this solution allows other transition functions to opt-in without needing
to have a whitelist in the core aggregation code.
(The reason we would need a whitelist is that currently, if you pass a
R/W expanded-object pointer to an arbitrary function, it's allowed to do
anything with it including deleting it; that breaks the core agg code's
assumption that it should free discarded values. Returning a value under
aggcontext is the transition function's signal that it knows it is an
aggregate transition function and will play nice. Possibly the API rules
for expanded objects should be refined, but that would not be a
back-patchable change.)
With this fix, an aggregate using array_append is no longer O(N^2), so it's
much faster than pre-9.5 code rather than much slower. It's still a bit
slower than the bespoke infrastructure for array_agg, but the differential
seems to be only about 10%-20% rather than orders of magnitude.
Discussion: <6315.1477677885@sss.pgh.pa.us>
The more efficient hashtable speeds up hash-aggregations with more than
a few hundred groups significantly. Improvements of over 120% have been
measured.
Due to the the different hash table queries that not fully
determined (e.g. GROUP BY without ORDER BY) may change their result
order.
The conversion is largely straight-forward, except that, due to the
static element types of simplehash.h type hashes, the additional data
some users store in elements (e.g. the per-group working data for hash
aggregaters) is now stored in TupleHashEntryData->additional. The
meaning of BuildTupleHashTable's entrysize (renamed to additionalsize)
has been changed to only be about the additionally stored size. That
size is only used for the initial sizing of the hash-table.
Reviewed-By: Tomas Vondra
Discussion: <20160727004333.r3e2k2y6fvk2ntup@alap3.anarazel.de>
ExecReScanAgg's check for whether it could re-use a previously calculated
hashtable neglected the possibility that the Agg node might reference
PARAM_EXEC Params that are not referenced by its input plan node. That's
okay if the Params are in upper tlist or qual expressions; but if one
appears in aggregate input expressions, then the hashtable contents need
to be recomputed when the Param's value changes.
To avoid unnecessary performance degradation in the case of a Param that
isn't within an aggregate input, add logic to the planner to determine
which Params are within aggregate inputs. This requires a new field in
struct Agg, but fortunately we never write plans to disk, so this isn't
an initdb-forcing change.
Per report from Jeevan Chalke. This has been broken since forever,
so back-patch to all supported branches.
Andrew Gierth, with minor adjustments by me
Report: <CAM2+6=VY8ykfLT5Q8vb9B6EbeBk-NGuLbT6seaQ+Fq4zXvrDcA@mail.gmail.com>
The original coding had three separate booleans representing partial
aggregation behavior, which was confusing, unreadable, and error-prone,
not least because the booleans weren't always listed in the same order.
It was also inadequate for the allegedly-desirable future extension to
support intermediate partial aggregation, because we'd need separate
markers for serialization and deserialization in such a case.
Merge these bools into an enum "AggSplit" to provide symbolic names for
the supported operating modes (and document what those are). By assigning
the values of the enum constants carefully, we can treat AggSplit values
as options bitmasks so that tests of what to do aren't noticeably more
expensive than before.
While at it, get rid of Aggref.aggoutputtype. That's not needed since
commit 59a3795c2 got rid of setrefs.c's special-purpose Aggref comparison
code, and it likewise seemed more confusing than helpful.
Assorted comment cleanup as well (there's still more that I want to do
in that line).
catversion bump for change in Aggref node contents. Should be the last
one for partial-aggregation changes.
Discussion: <29309.1466699160@sss.pgh.pa.us>
The original specification for this called for the deserialization function
to have signature "deserialize(serialtype) returns transtype", which is a
security violation if transtype is INTERNAL (which it always would be in
practice) and serialtype is not (which ditto). The patch blithely overrode
the opr_sanity check for that, which was sloppy-enough work in itself,
but the indisputable reason this cannot be allowed to stand is that CREATE
FUNCTION will reject such a signature and thus it'd be impossible for
extensions to create parallelizable aggregates.
The minimum fix to make the signature type-safe is to add a second, dummy
argument of type INTERNAL. But to lock it down a bit more and make misuse
of INTERNAL-accepting functions less likely, let's get rid of the ability
to specify a "serialtype" for an aggregate and just say that the only
useful serialtype is BYTEA --- which, in practice, is the only interesting
value anyway, due to the usefulness of the send/recv infrastructure for
this purpose. That means we only have to allow "serialize(internal)
returns bytea" and "deserialize(bytea, internal) returns internal" as
the signatures for these support functions.
In passing fix bogus signature of int4_avg_combine, which I found thanks
to adding an opr_sanity check on combinefunc signatures.
catversion bump due to removing pg_aggregate.aggserialtype and adjusting
signatures of assorted built-in functions.
David Rowley and Tom Lane
Discussion: <27247.1466185504@sss.pgh.pa.us>
Andres Freund
Tom Lane
Robert Haas
Peter Eisentraut
Bruce Momjian
Andrew Gierth
Heikki Linnakangas