Storing passwords in plaintext hasn't been a good idea for a very long
time, if ever. Now seems like a good time to finally forbid it, since we're
messing with this in PostgreSQL 10 anyway.
Remove the CREATE/ALTER USER UNENCRYPTED PASSSWORD 'foo' syntax, since
storing passwords unencrypted is no longer supported. ENCRYPTED PASSWORD
'foo' is still accepted, but ENCRYPTED is now just a noise-word, it does
the same as just PASSWORD 'foo'.
Likewise, remove the --unencrypted option from createuser, but accept
--encrypted as a no-op for backward compatibility. AFAICS, --encrypted was
a no-op even before this patch, because createuser encrypted the password
before sending it to the server even if --encrypted was not specified. It
added the ENCRYPTED keyword to the SQL command, but since the password was
already in encrypted form, it didn't make any difference. The documentation
was not clear on whether that was intended or not, but it's moot now.
Also, while password_encryption='on' is still accepted as an alias for
'md5', it is now marked as hidden, so that it is not listed as an accepted
value in error hints, for example. That's not directly related to removing
'plain', but it seems better this way.
Reviewed by Michael Paquier
Discussion: https://www.postgresql.org/message-id/16e9b768-fd78-0b12-cfc1-7b6b7f238fde@iki.fi
Add updates for recent commits.
In passing, credit Etsuro Fujita for his work on the postgres_fdw
query cancel feature in 9.6; I seem to have missed that in the
original drafting of the 9.6 notes.
Improve description of logical decoding snapshot issues, per suggestion
from Petr Jelinek. Mention possible need to re-sync logical replicas
as a post-upgrade task. Minor copy-editing for some other items.
As usual, the release notes for other branches will be made by cutting
these down, but put them up for community review first. Note there
are some entries that really only apply to pre-9.6 branches.
When the checkpointer writes the shutdown checkpoint, it checks
afterwards whether any WAL has been written since it started and throws
a PANIC if so. At that point, only walsenders are still active, so one
might think this could not happen, but walsenders can also generate WAL,
for instance in BASE_BACKUP and certain variants of
CREATE_REPLICATION_SLOT. So they can trigger this panic if such a
command is run while the shutdown checkpoint is being written.
To fix this, divide the walsender shutdown into two phases. First, the
postmaster sends a SIGUSR2 signal to all walsenders. The walsenders
then put themselves into the "stopping" state. In this state, they
reject any new commands. (For simplicity, we reject all new commands,
so that in the future we do not have to track meticulously which
commands might generate WAL.) The checkpointer waits for all walsenders
to reach this state before proceeding with the shutdown checkpoint.
After the shutdown checkpoint is done, the postmaster sends
SIGINT (previously unused) to the walsenders. This triggers the
existing shutdown behavior of sending out the shutdown checkpoint record
and then terminating.
Author: Michael Paquier <michael.paquier@gmail.com>
Reported-by: Fujii Masao <masao.fujii@gmail.com>
password_encryption was a boolean before version 10, so cope with "on" and
"off".
Also, change the behavior with "plain", to treat it the same as "md5".
We're discussing removing the password_encryption='plain' option from the
server altogether, which will make this the only reasonable choice, but
even if we kept it, it seems best to never send the password in cleartext.
Move the OWNER and RENAME clauses to the end, so the interesting
functionality is listed first. This is more typical on nearby reference
pages, whereas the previous order was the order in which the clauses
were added.
This goes together with the changes made to enable replication on the
sending side by default (wal_level, max_wal_senders etc) by making the
receiving stadby node also enable it by default.
Huong Dangminh
Even though no actual tuples are ever inserted into a partitioned
table (the actual tuples are in the partitions, not the partitioned
table itself), we still need to have a ResultRelInfo for the
partitioned table, or per-statement triggers won't get fired.
Amit Langote, per a report from Rajkumar Raghuwanshi. Reviewed by me.
Discussion: http://postgr.es/m/CAKcux6%3DwYospCRY2J4XEFuVy0L41S%3Dfic7rmkbsU-GXhhSbmBg%40mail.gmail.com
Declarative partitioning duplicated the TypedTableElement productions,
evidently to remove the need to specify WITH OPTIONS when creating
partitions. Instead, simply make WITH OPTIONS optional in the
TypedTableElement production and remove all of the duplicate
PartitionElement-related productions. This change simplifies the
syntax and makes WITH OPTIONS optional when adding defaults, constraints
or storage parameters to columns when creating either typed tables or
partitions.
Also update pg_dump to no longer include WITH OPTIONS, since it's not
necessary, and update the documentation to reflect that WITH OPTIONS is
now optional.
There is no need to forbid ALTER TABLE ONLY on partitioned tables,
when no partitions exist yet. This can be handy for users who are
building up their partitioned table independently and will create actual
partitions later.
In addition, this is how pg_dump likes to operate in certain instances.
Author: Amit Langote, with some error message word-smithing by me
The reference "That is the topic of the next section." has been
incorrect since the materialized views documentation got inserted
between the section "rules-views" and "rules-update".
Author: Zertrin <postgres_wiki@zertrin.org>
It doesn't make any immediate difference to PostgreSQL, but might as well
follow the standard, since one exists. (I looked at RFC 5803 earlier, but
didn't fully understand it back then.)
The new format uses Base64 instead of hex to encode StoredKey and
ServerKey, which makes the verifiers slightly smaller. Using the same
encoding for the salt and the keys also means that you only need one
encoder/decoder instead of two. Although we have code in the backend to
do both, we are talking about teaching libpq how to create SCRAM verifiers
for PQencodePassword(), and libpq doesn't currently have any code for hex
encoding.
Bump catversion, because this renders any existing SCRAM verifiers in
pg_authid invalid.
Discussion: https://www.postgresql.org/message-id/351ba574-85ea-d9b8-9689-8c928dd0955d@iki.fi
Extended statistics commit 7b504eb282 did not include appropriate
documentation next to where we document regular planner statistics (I
ripped what was submitted before commit and then forgot to put it back),
and while later commit 2686ee1b7c added some material, it structurally
depended on what I had ripped out, so the end result wasn't proper.
Fix those problems by shuffling what was added by 2686ee1b7c and
including some additional material, so that now chapter 14 "Performance
Tips" now describes the types of multivariate statistics we currently
have, and chapter 68 "How the Planner Uses Statistics" shows some
examples. The new text should be more in line with previous material,
in (hopefully) the appropriate depth.
While at it, fix a small bug in pg_statistic_ext docs: one column was
listed in the wrong spot.
Commit 05cd12ed5 ("pg_ctl: Change default to wait for all actions")
was a tad sloppy about updating the documentation to match. The
documentation was also sorely in need of a copy-editing pass, having
been adjusted at different times by different people who took little
care to maintain consistency of style.
Give a more specific error message than "xyz is not a table".
Also document in CREATE PUBLICATION which kinds of relations are not
supported.
based on patch by Amit Langote <Langote_Amit_f8@lab.ntt.co.jp>
Per discussion, plain "scram" is confusing because we actually implement
SCRAM-SHA-256 rather than the original SCRAM that uses SHA-1 as the hash
algorithm. If we add support for SCRAM-SHA-512 or some other mechanism in
the SCRAM family in the future, that would become even more confusing.
Most of the internal files and functions still use just "scram" as a
shorthand for SCRMA-SHA-256, but I did change PASSWORD_TYPE_SCRAM to
PASSWORD_TYPE_SCRAM_SHA_256, as that could potentially be used by 3rd
party extensions that hook into the password-check hook.
Michael Paquier did this in an earlier version of the SCRAM patch set
already, but I didn't include that in the version that was committed.
Discussion: https://www.postgresql.org/message-id/fde71ff1-5858-90c8-99a9-1c2427e7bafb@iki.fi
We were accepting creation of extended statistics only for regular
tables, but they can usefully be created for foreign tables, partitioned
tables, and materialized views, too. Allow those cases.
While at it, make sure all the rejected cases throw a consistent error
message, and add regression tests for the whole thing.
Author: David Rowley, Álvaro Herrera
Discussion: https://postgr.es/m/CAKJS1f-BmGo410bh5RSPZUvOO0LhmHL2NYmdrC_Jm8pk_FfyCA@mail.gmail.com
This contains some protocol changes to SASL authentiation (which is new
in v10):
* For future-proofing, in the AuthenticationSASL message that begins SASL
authentication, provide a list of SASL mechanisms that the server
supports, for the client to choose from. Currently, it's always just
SCRAM-SHA-256.
* Add a separate authentication message type for the final server->client
SASL message, which the client doesn't need to respond to. This makes
it unambiguous whether the client is supposed to send a response or not.
The SASL mechanism should know that anyway, but better to be explicit.
Also, in the server, support clients that don't send an Initial Client
response in the first SASLInitialResponse message. The server is supposed
to first send an empty request in that case, to which the client will
respond with the data that usually comes in the Initial Client Response.
libpq uses the Initial Client Response field and doesn't need this, and I
would assume any other sensible implementation to use Initial Client
Response, too, but let's follow the SASL spec.
Improve the documentation on SASL authentication in protocol. Add a
section describing the SASL message flow, and some details on our
SCRAM-SHA-256 implementation.
Document the different kinds of PasswordMessages that the frontend sends
in different phases of SASL authentication, as well as GSS/SSPI
authentication as separate message formats. Even though they're all 'p'
messages, and the exact format depends on the context, describing them as
separate message formats makes the documentation more clear.
Reviewed by Michael Paquier and Álvaro Hernández Tortosa.
Discussion: https://www.postgresql.org/message-id/CAB7nPqS-aFg0iM3AQOJwKDv_0WkAedRjs1W2X8EixSz+sKBXCQ@mail.gmail.com
Add a missing comma in the synopsis after the XMLNAMESPACES clause.
Also, add an example illustrating the use of that clause.
Author: Arjen Nienhuis and Pavel Stěhule
Previously the description about pg_stat_progress_vacuum was in the table
of "Collected Statistics Views" in the doc. But since it repors dynamic
information, i.e., the current progress of VACUUM, its description should be
in the table of "Dynamic Statistics Views".
Back-patch to 9.6 where pg_stat_progress_vacuum was added.
Author: Amit Langote
Discussion: http://postgr.es/m/7ab51b59-8d4d-6193-c60a-b75f222efb12@lab.ntt.co.jp
Tweak CSS a bit to match latest similar changes to web site style. Also
move some CSS out of the HTML to the stylesheet so that the web site
stylesheet can override it. This should ensure that notes and such are
back to being centered.
Hash indexes can contain both pages which are all-zeroes (i.e.
PageIsNew()) and pages which have been initialized but currently
aren't used. The latter category can happen either when a page
has been reserved but not yet used or when it is used for a time
and then freed. pgstattuple was only prepared to deal with the
pages that are actually-zeroes, which it called zero_pages.
Rename the column to unused_pages (extension version 1.5 is
as-yet-unreleased) and make it count both kinds of unused pages.
Along the way, slightly tidy up the way we test for pages of
various types.
Robert Haas and Ashutosh Sharma, reviewed by Amit Kapila
Discussion: http://postgr.es/m/CAE9k0PkTtKFB3YndOyQMjwuHx+-FtUP1ynK8E-nHtetoow3NtQ@mail.gmail.com
Specifically, the behavior of general-purpose and statistical aggregates
as window functions was not clearly documented, and terms were
inconsistently used. Also add docs about the difference between
cume_dist and percent_rank, rather than just the formulas.
Discussion: 20170406214918.GA5757@momjian.us
This removes the support for building just libpq using Borland C++ or
Visual C++. This has not worked properly for years, and given the number
of complaints it's clearly not worth the maintenance burden.
Building libpq using the standard MSVC build system is of course still
supported, along with mingw.
Commit 4deb41381 modified isolationtester's query to see whether a
session is blocked to also check for waits occurring in GetSafeSnapshot.
However, it did that in a way that enormously increased the query's
runtime under CLOBBER_CACHE_ALWAYS, causing the buildfarm members
that use that to run about four times slower than before, and in some
cases fail entirely. To fix, push the entire logic into a dedicated
backend function. This should actually reduce the CLOBBER_CACHE_ALWAYS
runtime from what it was previously, though I've not checked that.
In passing, expose a SQL function to check for safe-snapshot blockage,
comparable to pg_blocking_pids. This is more or less free given the
infrastructure built to solve the other problem, so we might as well.
Thomas Munro
Discussion: https://postgr.es/m/20170407165749.pstcakbc637opkax@alap3.anarazel.de
Defaults match the fixed behavior of prior releases, but now DBAs
have better options to tune serializable workloads.
It might be nice to be able to set this per relation, but that part
will need to wait for another release.
Author: Dagfinn Ilmari Mannsåker
This enables the same OpenSP warnings on osx calls that we get from
onsgmls (make check) and formerly from openjade.
Older tool chains apparently have some of these warnings on by
default (see comment at SPFLAGS assignment). So users of such tool
chains would complain about warnings or errors that users of newer tool
chains would not see, unless they used "make check".
With this change array fields are populated from json(b) arrays, and
composite fields are populated from json(b) objects.
Along the way, some significant code refactoring is done to remove
redundancy in the way to populate_record[_set] and to_record[_set]
functions operate, and some significant efficiency gains are made by
caching tuple descriptors.
Nikita Glukhov, edited some by me.
Reviewed by Aleksander Alekseev and Tom Lane.
All documentation is now built using XSLT. Remove all references to
Jade, DSSSL, also JadeTex and some other outdated tooling.
For chunked HTML builds, this changes nothing, but removes the
transitional "oldhtml" target. The single-page HTML build is ported
over to XSLT. For PDF builds, this removes the JadeTex builds and moves
the FOP builds in their place.
When sending a tuple attribute, the previous coding erroneously sent the
length byte before encoding conversion, which would lead to protocol
failures on the receiving side if the length did not match the following
string.
To fix that, use pq_sendcountedtext() for sending tuple attributes,
which takes care of all of that internally. To match the API of
pq_sendcountedtext(), send even text values without a trailing zero byte
and have the receiving end put it in place instead. This matches how
the standard FE/BE protocol behaves.
Reported-by: Kyotaro HORIGUCHI <horiguchi.kyotaro@lab.ntt.co.jp>
This is the SQL standard-conforming variant of PostgreSQL's serial
columns. It fixes a few usability issues that serial columns have:
- CREATE TABLE / LIKE copies default but refers to same sequence
- cannot add/drop serialness with ALTER TABLE
- dropping default does not drop sequence
- need to grant separate privileges to sequence
- other slight weirdnesses because serial is some kind of special macro
Reviewed-by: Vitaly Burovoy <vitaly.burovoy@gmail.com>
Follow on patch in the multi-variate statistics patch series.
CREATE STATISTICS s1 WITH (dependencies) ON (a, b) FROM t;
ANALYZE;
will collect dependency stats on (a, b) and then use the measured
dependency in subsequent query planning.
Commit 7b504eb282 added
CREATE STATISTICS with n-distinct coefficients. These are now
specified using the mutually exclusive option WITH (ndistinct).
Author: Tomas Vondra, David Rowley
Reviewed-by: Kyotaro HORIGUCHI, Álvaro Herrera, Dean Rasheed, Robert Haas
and many other comments and contributions
Discussion: https://postgr.es/m/56f40b20-c464-fad2-ff39-06b668fac47c@2ndquadrant.com
Commit 59702716 added transition table support to PL/pgsql so that
SQL queries in trigger functions could access those transient
tables. In order to provide the same level of support for PL/perl,
PL/python and PL/tcl, refactor the relevant code into a new
function SPI_register_trigger_data. Call the new function in the
trigger handler of all four PLs, and document it as a public SPI
function so that authors of out-of-tree PLs can do the same.
Also get rid of a second QueryEnvironment object that was
maintained by PL/pgsql. That was previously used to deal with
cursors, but the same approach wasn't appropriate for PLs that are
less tangled up with core code. Instead, have SPI_cursor_open
install the connection's current QueryEnvironment, as already
happens for SPI_execute_plan.
While in the docs, remove the note that transition tables were only
supported in C and PL/pgSQL triggers, and correct some ommissions.
Thomas Munro with some work by Kevin Grittner (mostly docs)
When changing the type of a sequence, adjust the min/max values of the
sequence if it looks like the previous values were the default values.
Previously, it would leave the old values in place, requiring manual
adjustments even in the usual/default cases.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Reviewed-by: Vitaly Burovoy <vitaly.burovoy@gmail.com>
Since hash indexes typically have very few overflow pages, adding a
new splitpoint essentially doubles the on-disk size of the index,
which can lead to large and abrupt increases in disk usage (and
perhaps long delays on occasion). To mitigate this problem to some
degree, divide larger splitpoints into four equal phases. This means
that, for example, instead of growing from 4GB to 8GB all at once, a
hash index will now grow from 4GB to 5GB to 6GB to 7GB to 8GB, which
is perhaps still not as smooth as we'd like but certainly an
improvement.
This changes the on-disk format of the metapage, so bump HASH_VERSION
from 2 to 3. This will force a REINDEX of all existing hash indexes,
but that's probably a good idea anyway. First, hash indexes from
pre-10 versions of PostgreSQL could easily be corrupted, and we don't
want to confuse corruption carried over from an older release with any
corruption caused despite the new write-ahead logging in v10. Second,
it will let us remove some backward-compatibility code added by commit
293e24e507.
Mithun Cy, reviewed by Amit Kapila, Jesper Pedersen and me. Regression
test outputs updated by me.
Discussion: http://postgr.es/m/CAD__OuhG6F1gQLCgMQNnMNgoCvOLQZz9zKYJQNYvYmmJoM42gA@mail.gmail.com
Discussion: http://postgr.es/m/CA+TgmoYty0jCf-pa+m+vYUJ716+AxM7nv_syvyanyf5O-L_i2A@mail.gmail.com
Heikki Linnakangas
Tom Lane
Bruce Momjian
Peter Eisentraut
Alvaro Herrera
Magnus Hagander
Robert Haas
Stephen Frost
Fujii Masao
Andrew Dunstan
Michael Meskes
Kevin Grittner
Simon Riggs