Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4d wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Standardize on testing a hash index page's type by doing
(opaque->hasho_flag & LH_PAGE_TYPE) == LH_xxx_PAGE
Various places were taking shortcuts like
opaque->hasho_flag & LH_BUCKET_PAGE
which while not actually wrong, is still bad practice because
it encourages use of
opaque->hasho_flag & LH_UNUSED_PAGE
which *is* wrong (LH_UNUSED_PAGE == 0, so the above is constant false).
hash_xlog.c's hash_mask() contained such an incorrect test.
This also ensures that we mask out the additional flag bits that
hasho_flag has accreted since 9.6. pgstattuple's pgstat_hash_page(),
for one, was failing to do that and was thus actively broken.
Also fix assorted comments that hadn't been updated to reflect the
extended usage of hasho_flag, and fix some macros that were testing
just "(hasho_flag & bit)" to use the less dangerous, project-approved
form "((hasho_flag & bit) != 0)".
Coverity found the bug in hash_mask(); I noted the one in
pgstat_hash_page() through code reading.
Instead of allocating memory in brin_deform_tuple and brin_copy_tuple
over and over during a scan, allow reuse of previously allocated memory.
This is said to make for a measurable performance improvement.
Author: Jinyu Zhang, Álvaro Herrera
Reviewed by: Tomas Vondra
Discussion: https://postgr.es/m/495deb78.4186.1500dacaa63.Coremail.beijing_pg@163.com
Make every page in a hash index which isn't all-zeroes have a valid
special space, so that tools like pageinspect don't error out.
Also, make pageinspect cope with all-zeroes pages, because
_hash_alloc_buckets can leave behind large numbers of those until
they're consumed by splits.
Ashutosh Sharma and Robert Haas, reviewed by Amit Kapila.
Original trouble report from Jeff Janes.
Discussion: http://postgr.es/m/CAMkU=1y6NjKmqbJ8wLMhr=F74WzcMALYWcVFhEpm7i=mV=XsOg@mail.gmail.com
Since hash indexes typically have very few overflow pages, adding a
new splitpoint essentially doubles the on-disk size of the index,
which can lead to large and abrupt increases in disk usage (and
perhaps long delays on occasion). To mitigate this problem to some
degree, divide larger splitpoints into four equal phases. This means
that, for example, instead of growing from 4GB to 8GB all at once, a
hash index will now grow from 4GB to 5GB to 6GB to 7GB to 8GB, which
is perhaps still not as smooth as we'd like but certainly an
improvement.
This changes the on-disk format of the metapage, so bump HASH_VERSION
from 2 to 3. This will force a REINDEX of all existing hash indexes,
but that's probably a good idea anyway. First, hash indexes from
pre-10 versions of PostgreSQL could easily be corrupted, and we don't
want to confuse corruption carried over from an older release with any
corruption caused despite the new write-ahead logging in v10. Second,
it will let us remove some backward-compatibility code added by commit
293e24e507.
Mithun Cy, reviewed by Amit Kapila, Jesper Pedersen and me. Regression
test outputs updated by me.
Discussion: http://postgr.es/m/CAD__OuhG6F1gQLCgMQNnMNgoCvOLQZz9zKYJQNYvYmmJoM42gA@mail.gmail.com
Discussion: http://postgr.es/m/CA+TgmoYty0jCf-pa+m+vYUJ716+AxM7nv_syvyanyf5O-L_i2A@mail.gmail.com
There are no functional changes here; this simply encapsulates knowledge
of the ItemPointerData struct so that a future patch can change things
without more breakage.
All direct users of ip_blkid and ip_posid are changed to use existing
macros ItemPointerGetBlockNumber and ItemPointerGetOffsetNumber
respectively. For callers where that's inappropriate (because they
Assert that the itempointer is is valid-looking), add
ItemPointerGetBlockNumberNoCheck and ItemPointerGetOffsetNumberNoCheck,
which lack the assertion but are otherwise identical.
Author: Pavan Deolasee
Discussion: https://postgr.es/m/CABOikdNnFon4cJiL=h1mZH3bgUeU+sWHuU4Yr8AB=j3A2p1GiA@mail.gmail.com
The warning about hash indexes not being write-ahead logged and their
use being discouraged has been removed. "snapshot too old" is now
supported for tables with hash indexes. Most importantly, barring
bugs, hash indexes will now be crash-safe and usable on standbys.
This commit doesn't yet add WAL consistency checking for hash
indexes, as we now have for other index types; a separate patch has
been submitted to cure that lack.
Amit Kapila, reviewed and slightly modified by me. The larger patch
series of which this is a part has been reviewed and tested by Álvaro
Herrera, Ashutosh Sharma, Mark Kirkwood, Jeff Janes, and Jesper
Pedersen.
Discussion: http://postgr.es/m/CAA4eK1JOBX=YU33631Qh-XivYXtPSALh514+jR8XeD7v+K3r_Q@mail.gmail.com
This makes almost all core code follow the policy introduced in the
previous commit. Specific decisions:
- Text search support functions with char* and length arguments, such as
prsstart and lexize, may receive unaligned strings. I doubt
maintainers of non-core text search code will notice.
- Use plain VARDATA() on values detoasted or synthesized earlier in the
same function. Use VARDATA_ANY() on varlenas sourced outside the
function, even if they happen to always have four-byte headers. As an
exception, retain the universal practice of using VARDATA() on return
values of SendFunctionCall().
- Retain PG_GETARG_BYTEA_P() in pageinspect. (Page images are too large
for a one-byte header, so this misses no optimization.) Sites that do
not call get_page_from_raw() typically need the four-byte alignment.
- For now, do not change btree_gist. Its use of four-byte headers in
memory is partly entangled with storage of 4-byte headers inside
GBT_VARKEY, on disk.
- For now, do not change gtrgm_consistent() or gtrgm_distance(). They
incorporate the varlena header into a cache, and there are multiple
credible implementation strategies to consider.
The contrib extensions pageinspect, pg_visibility and pgstattuple only
work against regular relations which have storage. They don't work
against foreign tables, partitioned (parent) tables, views, et al.
Add checks to the user-callable functions to return a useful error
message to the user if they mistakenly pass an invalid relation to a
function which doesn't accept that kind of relation.
In passing, improve some of the existing checks to use ereport() instead
of elog(), add a function to consolidate common checks where
appropriate, and add some regression tests.
Author: Amit Langote, with various changes by me
Reviewed by: Michael Paquier and Corey Huinker
Discussion: https://postgr.es/m/ab91fd9d-4751-ee77-c87b-4dd704c1e59c@lab.ntt.co.jp
It did that to verify that the page was an overflow page rather than
anything else, but that means that checking the status of all the
overflow bits requires reading the entire index. So don't do that.
The new code validates that the page is not a primary bucket page
or bitmap page by looking at the metapage, so that using this on
large numbers of pages can be reasonably efficient.
Ashutosh Sharma, per a complaint from me, and with further
modifications by me.
This avoids a very significant amount of buffer manager traffic and
contention when scanning hash indexes, because it's no longer
necessary to lock and pin the metapage for every scan. We do need
some way of figuring out when the cache is too stale to use any more,
so that when we lock the primary bucket page to which the cached
metapage points us, we can tell whether a split has occurred since we
cached the metapage data. To do that, we use the hash_prevblkno field
in the primary bucket page, which would otherwise always be set to
InvalidBuffer.
This patch contains code so that it will continue working (although
less efficiently) with hash indexes built before this change, but
perhaps we should consider bumping the hash version and ripping out
the compatibility code. That decision can be made later, though.
Mithun Cy, reviewed by Jesper Pedersen, Amit Kapila, and by me.
Before committing, I made a number of cosmetic changes to the last
posted version of the patch, adjusted _hash_getcachedmetap to be more
careful about order of operation, and made some necessary updates to
the pageinspect documentation and regression tests.
Uniformly expose unsigned quantities using the next-wider signed
integer type (since we have no unsigned types at the SQL level).
At the SQL level, this results a change to report itemoffset as
int4 rather than int2. Also at the SQL level, report one value
that is an OID as type oid. Under the hood, uniformly use macros
that match the SQL output type as to both width and signedness.
On machines with MAXALIGN = 8, the payload of a bytea is not maxaligned,
since it will start 4 bytes into a palloc'd value. On alignment-picky
hardware, this will cause failures in accesses to 8-byte-wide values
within the page. We already encountered this problem when we introduced
GIN index inspection functions, and fixed it in commit 84ad68d64. Make
use of the same function for hash indexes.
A small difficulty is that up to now contrib/pageinspect has not shared
any functions at all across files. To support that, introduce a common
header file "pageinspect.h" for the module.
Also, move get_page_from_raw() out of ginfuncs.c, where it didn't
especially belong, and put it in rawpage.c which seems a more natural home.
Per buildfarm.
Discussion: https://postgr.es/m/17311.1486134714@sss.pgh.pa.us
Per a report from Tom Lane, the ffactor reported by hash_metapage_info
and the free_size reported by hash_page_stats vary by platform.
Ashutosh Sharma and Robert Haas
It seems like somebody used a dartboard while choosing integer widths
for the various values taken and returned by these functions ... and
then threw a fresh set of darts while writing the SQL declarations.
This patch brings the C code into line with what the SQL declarations
say, which is enough to make it not dump core on the particular 32-bit
machine I'm testing on. But I think we could do with another round
of looking at what the datum widths *should* be. For instance, it's
not all that sensible that hash_bitmap_info decided to use int64 to
represent a BlockNumber input when get_raw_page doesn't do it that way.
There's also a remaining problem that the expected outputs from the
test script are platform-dependent, but I'll leave that issue for
somebody else.
Per buildfarm.
Commit 08bf6e5295 seems not to have
used the correct *GetDatum and PG_GETARG_* macros for the SQL types
in some cases, and some of the SQL types seem to have been poorly
chosen, too. Try to fix it. I'm not sure if this is the reason
why the buildfarm is currently unhappy with this code, but it
seems like a good place to start.
Buildfarm unhappiness reported by Tom Lane.
Patch by Jesper Pedersen and Ashutosh Sharma, with some error handling
improvements by me. Tests from Peter Eisentraut. Reviewed by Álvaro
Herrera, Michael Paquier, Jesper Pedersen, Jeff Janes, Peter
Eisentraut, Amit Kapila, Mithun Cy, and me.
Discussion: http://postgr.es/m/e2ac6c58-b93f-9dd9-f4e6-d6d30add7fdf@redhat.com
On closer inspection, commit 84ad68d64 broke gin_leafpage_items(),
because the aligned copy of the page got palloc'd in a short-lived
context whereas it needs to be in the SRF's multi_call_memory_ctx.
This was not exposed by the regression test, because the regression
test doesn't actually exercise the function in a meaningful way.
Fix the code bug, and extend the test in what I hope is a portable
fashion.
The raw page data that is passed into the functions will not be aligned
at 8-byte boundaries. Casting that to a struct and accessing int64
fields will result in unaligned access. On most platforms, you get away
with it, but it will result on a crash on pickier platforms such as ia64
and sparc64.
Somebody apparently thought that "if Int32GetDatum is good,
Int64GetDatum must be better". Per buildfarm failures now
that Peter has added some regression tests here.
These adjustments adjust code and comments in minor ways to prevent
pgindent from mangling them. Among other things, I tried to avoid
situations where pgindent would emit "a +b" instead of "a + b", and I
tried to avoid having it break up inline comments across multiple
lines.
CHECK_PAGE_OFFSET_RANGE() has been unused forever.
CHECK_RELATION_BLOCK_RANGE() has been unused in pgstatindex.c ever since
bt_page_stats() and bt_page_items() functions were moved from pgstattuple
to pageinspect module. It still exists in pageinspect/btreefuncs.c.
Daniel Gustafsson
The reverted changes were intended to force a choice of whether any
newly-added BufferGetPage() calls needed to be accompanied by a
test of the snapshot age, to support the "snapshot too old"
feature. Such an accompanying test is needed in about 7% of the
cases, where the page is being used as part of a scan rather than
positioning for other purposes (such as DML or vacuuming). The
additional effort required for back-patching, and the doubt whether
the intended benefit would really be there, have indicated it is
best just to rely on developers to do the right thing based on
comments and existing usage, as we do with many other conventions.
This change should have little or no effect on generated executable
code.
Motivated by the back-patching pain of Tom Lane and Robert Haas
This patch is a no-op patch which is intended to reduce the chances
of failures of omission once the functional part of the "snapshot
too old" patch goes in. It adds parameters for snapshot, relation,
and an enum to specify whether the snapshot age check needs to be
done for the page at this point. This initial patch passes NULL
for the first two new parameters and BGP_NO_SNAPSHOT_TEST for the
third. The follow-on patch will change the places where the test
needs to be made.
brin_page_type() and brin_metapage_info() did not enforce being called
by superuser, like other pageinspect functions that take bytea do.
Since they don't verify the passed page thoroughly, it is possible to
use them to read the server memory with a carefully crafted bytea value,
up to a file kilobytes from where the input bytea is located.
Have them throw errors if called by a non-superuser.
Report and initial patch: Andreas Seltenreich
Security: CVE-2016-3065
This patch reduces pg_am to just two columns, a name and a handler
function. All the data formerly obtained from pg_am is now provided
in a C struct returned by the handler function. This is similar to
the designs we've adopted for FDWs and tablesample methods. There
are multiple advantages. For one, the index AM's support functions
are now simple C functions, making them faster to call and much less
error-prone, since the C compiler can now check function signatures.
For another, this will make it far more practical to define index access
methods in installable extensions.
A disadvantage is that SQL-level code can no longer see attributes
of index AMs; in particular, some of the crosschecks in the opr_sanity
regression test are no longer possible from SQL. We've addressed that
by adding a facility for the index AM to perform such checks instead.
(Much more could be done in that line, but for now we're content if the
amvalidate functions more or less replace what opr_sanity used to do.)
We might also want to expose some sort of reporting functionality, but
this patch doesn't do that.
Alexander Korotkov, reviewed by Petr Jelínek, and rather heavily
editorialized on by me.
This function was using the single-value-per-call mechanism, but the
code relied on a relcache entry that wasn't kept open across calls.
This manifested as weird errors in buildfarm during the short time that
the "brin-1" isolation test lived.
Backpatch to 9.5, where it was introduced.
The minmax opclass was using the wrong support functions when
cross-datatypes queries were run. Instead of trying to fix the
pg_amproc definitions (which apparently is not possible), use the
already correct pg_amop entries instead. This requires jumping through
more hoops (read: extra syscache lookups) to obtain the underlying
functions to execute, but it is necessary for correctness.
Author: Emre Hasegeli, tweaked by Álvaro
Review: Andreas Karlsson
Also change BrinOpcInfo to record each stored type's typecache entry
instead of just the OID. Turns out that the full type cache is
necessary in brin_deform_tuple: the original code used the indexed
type's byval and typlen properties to extract the stored tuple, which is
correct in Minmax; but in other implementations that want to store
something different, that's wrong. The realization that this is a bug
comes from Emre also, but I did not use his patch.
I also adopted Emre's regression test code (with smallish changes),
which is more complete.
... which is the usual convention among AMs, so that pg_filedump and
similar utilities can tell apart pages of different AMs. It was also
the intent of the original code, but I failed to realize that alignment
considerations would move the whole thing to the previous-to-last word
in the page.
The new definition of the associated macro makes surrounding code a bit
leaner, too.
Per note from Heikki at
http://www.postgresql.org/message-id/546A16EF.9070005@vmware.com
This requires changing quite a few places that were depending on
sizeof(HeapTupleHeaderData), but it seems for the best.
Michael Paquier, some adjustments by me
Replace some bogus "x[1]" declarations with "x[FLEXIBLE_ARRAY_MEMBER]".
Aside from being more self-documenting, this should help prevent bogus
warnings from static code analyzers and perhaps compiler misoptimizations.
This patch is just a down payment on eliminating the whole problem, but
it gets rid of a lot of easy-to-fix cases.
Note that the main problem with doing this is that one must no longer rely
on computing sizeof(the containing struct), since the result would be
compiler-dependent. Instead use offsetof(struct, lastfield). Autoconf
also warns against spelling that offsetof(struct, lastfield[0]).
Michael Paquier, review and additional fixes by me.
BRIN is a new index access method intended to accelerate scans of very
large tables, without the maintenance overhead of btrees or other
traditional indexes. They work by maintaining "summary" data about
block ranges. Bitmap index scans work by reading each summary tuple and
comparing them with the query quals; all pages in the range are returned
in a lossy TID bitmap if the quals are consistent with the values in the
summary tuple, otherwise not. Normal index scans are not supported
because these indexes do not store TIDs.
As new tuples are added into the index, the summary information is
updated (if the block range in which the tuple is added is already
summarized) or not; in the latter case, a subsequent pass of VACUUM or
the brin_summarize_new_values() function will create the summary
information.
For data types with natural 1-D sort orders, the summary info consists
of the maximum and the minimum values of each indexed column within each
page range. This type of operator class we call "Minmax", and we
supply a bunch of them for most data types with B-tree opclasses.
Since the BRIN code is generalized, other approaches are possible for
things such as arrays, geometric types, ranges, etc; even for things
such as enum types we could do something different than minmax with
better results. In this commit I only include minmax.
Catalog version bumped due to new builtin catalog entries.
There's more that could be done here, but this is a good step forwards.
Loosely based on ideas from Simon Riggs; code mostly by Álvaro Herrera,
with contribution by Heikki Linnakangas.
Patch reviewed by: Amit Kapila, Heikki Linnakangas, Robert Haas.
Testing help from Jeff Janes, Erik Rijkers, Emanuel Calvo.
PS:
The research leading to these results has received funding from the
European Union's Seventh Framework Programme (FP7/2007-2013) under
grant agreement n° 318633.
Some of the many error messages introduced in 458857cc missed 'FROM
unpackaged'. Also e016b724 and 45ffeb7e forgot to quote extension
version numbers.
Backpatch to 9.1, just like 458857cc which introduced the messages. Do
so because the error messages thrown when the wrong command is copy &
pasted aren't easy to understand.
get_raw_page tried to validate the supplied block number against
RelationGetNumberOfBlocks(), which of course is only right when
accessing the main fork. In most cases, the main fork is longer
than the others, so that the check was too weak (allowing a
lower-level error to be reported, but no real harm to be done).
However, very small tables could have an FSM larger than their heap,
in which case the mistake prevented access to some FSM pages.
Per report from Torsten Foertsch.
In passing, make the bad-block-number error into an ereport not elog
(since it's certainly not an internal error); and fix sloppily
maintained comment for RelationGetNumberOfBlocksInFork.
This has been wrong since we invented relation forks, so back-patch
to all supported branches.
Prominent binaries already had this metadata. A handful of minor
binaries, such as pg_regress.exe, still lack it; efforts to eliminate
such exceptions are welcome.
Michael Paquier, reviewed by MauMau.
Because of gcc -Wmissing-prototypes, all functions in dynamically
loadable modules must have a separate prototype declaration. This is
meant to detect global functions that are not declared in header files,
but in cases where the function is called via dfmgr, this is redundant.
Besides filling up space with boilerplate, this is a frequent source of
compiler warnings in extension modules.
We can fix that by creating the function prototype as part of the
PG_FUNCTION_INFO_V1 macro, which such modules have to use anyway. That
makes the code of modules cleaner, because there is one less place where
the entry points have to be listed, and creates an additional check that
functions have the right prototype.
Remove now redundant prototypes from contrib and other modules.
Instead of changing the tuple xmin to FrozenTransactionId, the combination
of HEAP_XMIN_COMMITTED and HEAP_XMIN_INVALID, which were previously never
set together, is now defined as HEAP_XMIN_FROZEN. A variety of previous
proposals to freeze tuples opportunistically before vacuum_freeze_min_age
is reached have foundered on the objection that replacing xmin by
FrozenTransactionId might hinder debugging efforts when things in this
area go awry; this patch is intended to solve that problem by keeping
the XID around (but largely ignoring the value to which it is set).
Third-party code that checks for HEAP_XMIN_INVALID on tuples where
HEAP_XMIN_COMMITTED might be set will be broken by this change. To fix,
use the new accessor macros in htup_details.h rather than consulting the
bits directly. HeapTupleHeaderGetXmin has been modified to return
FrozenTransactionId when the infomask bits indicate that the tuple is
frozen; use HeapTupleHeaderGetRawXmin when you already know that the
tuple isn't marked commited or frozen, or want the raw value anyway.
We currently do this in routines that display the xmin for user consumption,
in tqual.c where it's known to be safe and important for the avoidance of
extra cycles, and in the function-caching code for various procedural
languages, which shouldn't invalidate the cache just because the tuple
gets frozen.
Robert Haas and Andres Freund
Remove use of PageSetTLI() from all page manipulation functions
and adjust README to indicate change in the way we make changes
to pages. Repurpose those bytes into the pd_checksum field and
explain how that works in comments about page header.
Refactoring ahead of actual feature patch which would make use
of the checksum field, arriving later.
Jeff Davis, with comments and doc changes by Simon Riggs
Direction suggested by Robert Haas; many others providing
review comments.
This patch introduces two additional lock modes for tuples: "SELECT FOR
KEY SHARE" and "SELECT FOR NO KEY UPDATE". These don't block each
other, in contrast with already existing "SELECT FOR SHARE" and "SELECT
FOR UPDATE". UPDATE commands that do not modify the values stored in
the columns that are part of the key of the tuple now grab a SELECT FOR
NO KEY UPDATE lock on the tuple, allowing them to proceed concurrently
with tuple locks of the FOR KEY SHARE variety.
Foreign key triggers now use FOR KEY SHARE instead of FOR SHARE; this
means the concurrency improvement applies to them, which is the whole
point of this patch.
The added tuple lock semantics require some rejiggering of the multixact
module, so that the locking level that each transaction is holding can
be stored alongside its Xid. Also, multixacts now need to persist
across server restarts and crashes, because they can now represent not
only tuple locks, but also tuple updates. This means we need more
careful tracking of lifetime of pg_multixact SLRU files; since they now
persist longer, we require more infrastructure to figure out when they
can be removed. pg_upgrade also needs to be careful to copy
pg_multixact files over from the old server to the new, or at least part
of multixact.c state, depending on the versions of the old and new
servers.
Tuple time qualification rules (HeapTupleSatisfies routines) need to be
careful not to consider tuples with the "is multi" infomask bit set as
being only locked; they might need to look up MultiXact values (i.e.
possibly do pg_multixact I/O) to find out the Xid that updated a tuple,
whereas they previously were assured to only use information readily
available from the tuple header. This is considered acceptable, because
the extra I/O would involve cases that would previously cause some
commands to block waiting for concurrent transactions to finish.
Another important change is the fact that locking tuples that have
previously been updated causes the future versions to be marked as
locked, too; this is essential for correctness of foreign key checks.
This causes additional WAL-logging, also (there was previously a single
WAL record for a locked tuple; now there are as many as updated copies
of the tuple there exist.)
With all this in place, contention related to tuples being checked by
foreign key rules should be much reduced.
As a bonus, the old behavior that a subtransaction grabbing a stronger
tuple lock than the parent (sub)transaction held on a given tuple and
later aborting caused the weaker lock to be lost, has been fixed.
Many new spec files were added for isolation tester framework, to ensure
overall behavior is sane. There's probably room for several more tests.
There were several reviewers of this patch; in particular, Noah Misch
and Andres Freund spent considerable time in it. Original idea for the
patch came from Simon Riggs, after a problem report by Joel Jacobson.
Most code is from me, with contributions from Marti Raudsepp, Alexander
Shulgin, Noah Misch and Andres Freund.
This patch was discussed in several pgsql-hackers threads; the most
important start at the following message-ids:
AANLkTimo9XVcEzfiBR-ut3KVNDkjm2Vxh+t8kAmWjPuv@mail.gmail.com1290721684-sup-3951@alvh.no-ip.org1294953201-sup-2099@alvh.no-ip.org1320343602-sup-2290@alvh.no-ip.org1339690386-sup-8927@alvh.no-ip.org4FE5FF020200002500048A3D@gw.wicourts.gov4FEAB90A0200002500048B7D@gw.wicourts.gov
This reduces unnecessary exposure of other headers through htup.h, which
is very widely included by many files.
I have chosen to move the function prototypes to the new file as well,
because that means htup.h no longer needs to include tupdesc.h. In
itself this doesn't have much effect in indirect inclusion of tupdesc.h
throughout the tree, because it's also required by execnodes.h; but it's
something to explore in the future, and it seemed best to do the htup.h
change now while I'm busy with it.
This simplifies code that needs to do arithmetic on XLogRecPtrs.
To avoid changing on-disk format of data pages, the LSN on data pages is
still stored in the old format. That should keep pg_upgrade happy. However,
we have XLogRecPtrs embedded in the control file, and in the structs that
are sent over the replication protocol, so this changes breaks compatibility
of pg_basebackup and server. I didn't do anything about this in this patch,
per discussion on -hackers, the right thing to do would to be to change the
replication protocol to be architecture-independent, so that you could use
a newer version of pg_receivexlog, for example, against an older server
version.
We have seen one too many reports of people trying to use 9.1 extension
files in the old-fashioned way of sourcing them in psql. Not only does
that usually not work (due to failure to substitute for MODULE_PATHNAME
and/or @extschema@), but if it did work they'd get a collection of loose
objects not an extension. To prevent this, insert an \echo ... \quit
line that prints a suitable error message into each extension script file,
and teach commands/extension.c to ignore lines starting with \echo.
That should not only prevent any adverse consequences of loading a script
file the wrong way, but make it crystal clear to users that they need to
do it differently now.
Tom Lane, following an idea of Andrew Dunstan's. Back-patch into 9.1
... there is not going to be much value in this if we wait till 9.2.
This warning is new in gcc 4.6 and part of -Wall. This patch cleans
up most of the noise, but there are some still warnings that are
trickier to remove.
HeapTupleHeader's t_infomask and t_infomask2 are defined as 16-bit
unsigned integers, so when the 16th bit was set, heap_page_item was
returning them as negative values, which was ugly.
The change to pageinspect--unpackaged--1.0.sql allows a module upgraded
from 9.0 to be cleanly updated from the previous definition.
It was never terribly consistent to use OR REPLACE (because of the lack of
comparable functionality for data types, operators, etc), and
experimentation shows that it's now positively pernicious in the extension
world. We really want a failure to occur if there are any conflicts, else
it's unclear what the extension-ownership state of the conflicted object
ought to be. Most of the time, CREATE EXTENSION will fail anyway because
of conflicts on other object types, but an extension defining only
functions can succeed, with bad results.
This isn't fully tested as yet, in particular I'm not sure that the
"foo--unpackaged--1.0.sql" scripts are OK. But it's time to get some
buildfarm cycles on it.
sepgsql is not converted to an extension, mainly because it seems to
require a very nonstandard installation process.
Dimitri Fontaine and Tom Lane
Foreign tables are a core component of SQL/MED. This commit does
not provide a working SQL/MED infrastructure, because foreign tables
cannot yet be queried. Support for foreign table scans will need to
be added in a future patch. However, this patch creates the necessary
system catalog structure, syntax support, and support for ancillary
operations such as COMMENT and SECURITY LABEL.
Shigeru Hanada, heavily revised by Robert Haas
The original implementation of the 3-argument form of get_raw_page() risked
core dumps if the 8.3 SQL function definition was mistakenly used with the
8.4 module, which is entirely likely after a dump-and-reload upgrade. To
protect 8.4 beta testers against upgrade problems, add a check on PG_NARGS.
In passing, fix missed additions to the uninstall script, and polish the
docs a trifle.
temporary tables of other sessions; that is unsafe because of the way our
buffer management works. Per report from Stuart Bishop.
This is redundant with the bufmgr.c checks in HEAD, but not at all redundant
in the back branches.
functions into one ReadBufferExtended function, that takes the strategy
and mode as argument. There's three modes, RBM_NORMAL which is the default
used by plain ReadBuffer(), RBM_ZERO, which replaces ZeroOrReadBuffer, and
a new mode RBM_ZERO_ON_ERROR, which allows callers to read corrupt pages
without throwing an error. The FSM needs the new mode to recover from
corrupt pages, which could happend if we crash after extending an FSM file,
and the new page is "torn".
Add fork number to some error messages in bufmgr.c, that still lacked it.
relation forks. While the file names are not visible to users, for those
that do peek into the data directory, it's nice to have more descriptive
names. Per Greg Stark's suggestion.
free space information is stored in a dedicated FSM relation fork, with each
relation (except for hash indexes; they don't use FSM).
This eliminates the max_fsm_relations and max_fsm_pages GUC options; remove any
trace of them from the backend, initdb, and documentation.
Rewrite contrib/pg_freespacemap to match the new FSM implementation. Also
introduce a new variant of the get_raw_page(regclass, int4, int4) function in
contrib/pageinspect that let's you to return pages from any relation fork, and
a new fsm_page_contents() function to inspect the new FSM pages.
unnecessary #include lines in it. Also, move some tuple routine prototypes and
macros to htup.h, which allows removal of heapam.h inclusion from some .c
files.
For this to work, a new header file access/sysattr.h needed to be created,
initially containing attribute numbers of system columns, for pg_dump usage.
While at it, make contrib ltree, intarray and hstore header files more
consistent with our header style.