GetExistingLocalJoinPath() is useful for handling EvalPlanQual rechecks
properly, and GetUserMappingById() is needed to make sure you're using
the right credentials.
Shigeru Hanada, Etsuro Fujita, Ashutosh Bapat, Robert Haas
The previous RequestAddinLWLocks() method had several disadvantages.
First, the locks would be in the main tranche; we've recently decided
that it's useful for LWLocks used for separate purposes to have
separate tranche IDs. Second, there wasn't any correlation between
what code called RequestAddinLWLocks() and what code called
LWLockAssign(); when multiple modules are in use, it could become
quite difficult to troubleshoot problems where LWLockAssign() ran out
of locks. To fix, create a concept of named LWLock tranches which
can be used either by extension or by core code.
Amit Kapila and Robert Haas
Since there currently is only one possible parenthesized option, namely
VERBOSE, it's a bit pointless to show it with "{ } [, ... ]". The curly
braces are useless and therefore confusing, as seen in a recent question
from Karsten Hilbert. Remove the extra decoration for the time being;
we can put it back when and if REINDEX grows some more options.
Have varlena.c expose an interface that allows the char(n), bytea, and
bpchar types to piggyback on a now-generalized SortSupport for text.
This pushes a little more knowledge of the bpchar/char(n) type into
varlena.c than might be preferred, but that seems like the approach
that creates least friction. Also speed things up for index builds
that use text_pattern_ops or varchar_pattern_ops.
This patch does quite a bit of renaming, but it seems likely to be
worth it, so as to avoid future confusion about the fact that this code
is now more generally used than the old names might have suggested.
Peter Geoghegan, reviewed by Álvaro Herrera and Andreas Karlsson,
with small tweaks by me.
This patch doesn't put the new infrastructure to use anywhere, and
indeed it's not clear how it could ever be used for something like
postgres_fdw which has to send an SQL query and wait for a reply,
but there might be FDWs or custom scan providers that are CPU-bound,
so let's give them a way to join club parallel.
KaiGai Kohei, reviewed by me.
You can't really do anything useful with this in the form it currently
exists; among other problems, there's no way to reread whatever
information might be produced when the path is output. Work is
underway to replace this with a more useful and more general system of
extensible nodes, but let's start by getting rid of this bit.
Extracted from a larger patch by KaiGai Kohei.
The default fetch size of 100 rows might not be right in every
environment, so allow users to configure it.
Corey Huinker, reviewed by Kyotaro Horiguchi, Andres Freund, and me.
Insert sd_notify() calls at server start and stop for integration with
systemd. This allows the use of systemd service units of type "notify",
which greatly simplifies the systemd configuration.
Reviewed-by: Pavel Stěhule <pavel.stehule@gmail.com>
Provide per-script statistical info (count of transactions executed
under that script, average latency for the whole script) after a
multi-script run, adding an intermediate level of detail to existing
global stats and per-command stats.
Author: Fabien Coelho
Reviewer: Michaël Paquier, Álvaro Herrera
The documentation mentioned contrib/ but the module was moved to
src/test/modules/ by commit 22dfd116a1 of 9.5 era.
Problem pointed out by Dickson Guedes in bug #13896
Backpatch-to: 9.5.
This function cleans up the pending list of the GIN index by
moving entries in it to the main GIN data structure in bulk.
It returns the number of pages cleaned up from the pending list.
This function is useful, for example, when the pending list
needs to be cleaned up *quickly* to improve the performance of
the search using GIN index. VACUUM can do the same thing, too,
but it may take days to run on a large table.
Jeff Janes,
reviewed by Julien Rouhaud, Jaime Casanova, Alvaro Herrera and me.
Discussion: CAMkU=1x8zFkpfnozXyt40zmR3Ub_kHu58LtRmwHUKRgQss7=iQ@mail.gmail.com
Previously, it was possible to specify one or several custom scripts to
run, or only one of the builtin scripts. With this patch it is also
possible to specify to run the builtin scripts multiple times, using the
new -b option. Also, unify the code for both cases; this eases future
pgbench improvements.
Author: Fabien Coelho
Review: Michaël Paquier, Álvaro Herrera
The implementations go to some lengths to deliver exact results for values
where an exact result can be expected, such as sind(30) = 0.5 exactly.
Dean Rasheed, reviewed by Michael Paquier
Historically, extract() just returned zero for any case involving an
infinite timestamp[tz] input; even cases in which the unit name was
invalid. This is not very sensible. Instead, return infinity or
-infinity as appropriate when the requested field is one that is
monotonically increasing (e.g, year, epoch), or NULL when it is not
(e.g., day, hour). Also, throw the expected errors for bad unit names.
BACKWARDS INCOMPATIBLE CHANGE
Vitaly Burovoy, reviewed by Vik Fearing
Aggregate nodes now have two new modes: a "partial" mode where they
output the unfinalized transition state, and a "finalize" mode where
they accept unfinalized transition states rather than individual
values as input.
These new modes are not used anywhere yet, but they will be necessary
for parallel aggregation. The infrastructure also figures to be
useful for cases where we want to aggregate local data and remote
data via the FDW interface, and want to bring back partial aggregates
from the remote side that can then be combined with locally generated
partial aggregates to produce the final value. It may also be useful
even when neither FDWs nor parallelism are in play, as explained in
the comments in nodeAgg.c.
David Rowley and Simon Riggs, reviewed by KaiGai Kohei, Heikki
Linnakangas, Haribabu Kommi, and me.
GIN had some minor issues too, mostly using "internal" where something
else would be more appropriate. I went with the same approach as in
9ff60273e3, namely preferring the opclass' indexed datatype for
arguments that receive an operator RHS value, even if that's not
necessarily what they really are.
Again, this is with an eye to having a uniform rule for ginvalidate()
to check support function signatures.
The conventions specified by the GiST SGML documentation were widely
ignored. For example, the strategy-number argument for "consistent" and
"distance" functions is specified to be a smallint, but most of the
built-in support functions declared it as an integer, and for that matter
the core code passed it using Int32GetDatum not Int16GetDatum. None of
that makes any real difference at runtime, but it's quite confusing for
newcomers to the code, and it makes it very hard to write an amvalidate()
function that checks support function signatures. So let's try to instill
some consistency here.
Another similar issue is that the "query" argument is not of a single
well-defined type, but could have different types depending on the strategy
(corresponding to search operators with different righthand-side argument
types). Some of the functions threw up their hands and declared the query
argument as being of "internal" type, which surely isn't right ("any" would
have been more appropriate); but the majority position seemed to be to
declare it as being of the indexed data type, corresponding to a search
operator with both input types the same. So I've specified a convention
that that's what to do always.
Also, the result of the "union" support function actually must be of the
index's storage type, but the documentation suggested declaring it to
return "internal", and some of the functions followed that. Standardize
on telling the truth, instead.
Similarly, standardize on declaring the "same" function's inputs as
being of the storage type, not "internal".
Also, somebody had forgotten to add the "recheck" argument to both
the documentation of the "distance" support function and all of their
SQL declarations, even though the C code was happily using that argument.
Clean that up too.
Fix up some other omissions in the docs too, such as documenting that
union's second input argument is vestigial.
So far as the errors in core function declarations go, we can just fix
pg_proc.h and bump catversion. Adjusting the erroneous declarations in
contrib modules is more debatable: in principle any change in those
scripts should involve an extension version bump, which is a pain.
However, since these changes are purely cosmetic and make no functional
difference, I think we can get away without doing that.
This patch reduces pg_am to just two columns, a name and a handler
function. All the data formerly obtained from pg_am is now provided
in a C struct returned by the handler function. This is similar to
the designs we've adopted for FDWs and tablesample methods. There
are multiple advantages. For one, the index AM's support functions
are now simple C functions, making them faster to call and much less
error-prone, since the C compiler can now check function signatures.
For another, this will make it far more practical to define index access
methods in installable extensions.
A disadvantage is that SQL-level code can no longer see attributes
of index AMs; in particular, some of the crosschecks in the opr_sanity
regression test are no longer possible from SQL. We've addressed that
by adding a facility for the index AM to perform such checks instead.
(Much more could be done in that line, but for now we're content if the
amvalidate functions more or less replace what opr_sanity used to do.)
We might also want to expose some sort of reporting functionality, but
this patch doesn't do that.
Alexander Korotkov, reviewed by Petr Jelínek, and rather heavily
editorialized on by me.
This new view provides insight into the state of a running WAL receiver
in a HOT standby node.
The information returned includes the PID of the WAL receiver process,
its status (stopped, starting, streaming, etc), start LSN and TLI, last
received LSN and TLI, timestamp of last message send and receipt, latest
end-of-WAL LSN and time, and the name of the slot (if any).
Access to the detailed data is only granted to superusers; others only
get the PID.
Author: Michael Paquier
Reviewer: Haribabu Kommi
Using cstring as the input type was a poor decision, because that's not
really a full-fledged type. In particular, it lacks implicit coercions
from text or varchar, meaning that usages like to_regproc('foo'||'bar')
wouldn't work; basically the only case that did work without explicit
casting was a simple literal constant argument.
The lack of field complaints about this suggests that hardly anyone
is using these functions, so hopefully fixing it won't cause much of
a compatibility problem. They've only been there since 9.4, anyway.
Petr Korobeinikov
Commit 43cd468cf0 added some wording to create_policy.sgml purporting
to warn users against a race condition of the sort that had been noted some
time ago by Peter Geoghegan. However, that warning was far too vague to be
useful (or at least, I completely failed to grasp what it was on about).
Since the problem case occurs with a security design pattern that lots of
people are likely to try to use, we need to be as clear as possible about
it. Provide a concrete example in the main-line docs in place of the
original warning.
Some time back we agreed that row_security=off should not be a way to
bypass RLS entirely, but only a way to get an error if it was being
applied. However, the code failed to act that way for table owners.
Per discussion, this is a must-fix bug for 9.5.0.
Adjust the logic in rls.c to behave as expected; also, modify the
error message to be more consistent with the new interpretation.
The regression tests need minor corrections as well. Also update
the comments about row_security in ddl.sgml to be correct. (The
official description of the GUC in config.sgml is already correct.)
I failed to resist the temptation to do some other very minor
cleanup as well, such as getting rid of a duplicate extern declaration.
As pointed out by Michael Paquier, recovery_min_apply_delay didn't exist
in 9.0-9.3, making the release note text not very useful. Instead make it
talk about recovery_target_xid, which did exist then.
9.0 is already out of support, but we can fix the text in the newer
branches' copies of its release notes.
Empty ulink elements default to displaying the URL, so there is no need
to specify the URL again. This was already done for most occurrences,
but some cases didn't follow this convention.
Improve markup, particularly of the table of functions; add or improve
examples for some of the functions; wordsmith some of the function
descriptions.
Commit 33bd250f6c could have done with
some more review:
Adjust coding so that compilers unfamiliar with elog/ereport don't complain
about uninitialized values.
Fix misuse of PG_GETARG_INT16 to retrieve arguments declared as "integer"
at the SQL level. (This was evidently copied from cube_ll_coord and
cube_ur_coord, but those were wrong too.)
Fix non-style-guide-conforming error messages.
Fix underparenthesized if statements, which pgindent would have made a
hash of, and remove some unnecessary parens elsewhere.
Run pgindent over new code.
Revise documentation: repeated accretion of more operators without any
rethinking of the text already there had left things in a bit of a mess.
Merge all the cube operators into one table and adjust surrounding text
appropriately.
David Rowley and Tom Lane
Common mathematical convention is that exponentiation associates right to
left. We aren't going to change the parser for this, but we could note
it in the operator's description. (It's already noted in the operator
precedence/associativity table, but users might not look there.)
Per bug #13829 from Henrik Pauli.
Tone down an overly strong statement about which pseudo-types PLs are
likely to allow. Add "event_trigger" to the list, as well as
"pg_ddl_command" in 9.5/HEAD. Back-patch to 9.3 where event_trigger
was added.
Omitted boundaries represent the upper or lower limit of the corresponding
array subscript. This allows simpler specification of many common
use-cases.
(Revised version of commit 9246af6799)
YUriy Zhuravlev
Per a recommendation from Tomas Vondra, it's more helpful to refer to
the value that determines how skewed a Gaussian or exponential
distribution is as a parameter rather than a threshold.
Since it's not quite too late to get this right in 9.5, where it was
introduced, back-patch this. Most of the patch changes only comments
and documentation, but a few pgbench messages are altered to match.
Fabien Coelho, reviewed by Michael Paquier and by me.
Introduce distance operators over cubes:
<#> taxicab distance
<-> euclidean distance
<=> chebyshev distance
Also add kNN support of those distances in GiST opclass.
Author: Stas Kelvich
Previously, -j caused the entire input file to be read in and executed as
a single command string. That's undesirable, not least because any error
causes the entire file to be regurgitated as the "failing query". Some
experimentation suggests a better rule: end the command string when we see
a semicolon immediately followed by two newlines, ie, an empty line after
a query. This serves nicely to break up the existing examples such as
information_schema.sql and system_views.sql. A limitation is that it's
no longer possible to write such a sequence within a string literal or
multiline comment in a file meant to be read with -j; but there are no
instances of such a problem within the data currently used by initdb.
(If someone does make such a mistake in future, it'll be obvious because
they'll get an unterminated-literal or unterminated-comment syntax error.)
Other than that, there shouldn't be any negative consequences; you're not
forced to end statements that way, it's just a better idea in most cases.
In passing, remove src/include/tcop/tcopdebug.h, which is dead code
because it's not included anywhere, and hasn't been for more than
ten years. One of the debug-support symbols it purported to describe
has been unreferenced for at least the same amount of time, and the
other is removed by this commit on the grounds that it was useless:
forcing -j mode all the time would have broken initdb. The lack of
complaints about that, or about the missing inclusion, shows that
no one has tried to use TCOP_DONTUSENEWLINE in many years.
Clarify that SELECT policies are now applied when SELECT rights
are required for a given query, even if the query is an UPDATE or
DELETE query. Pointed out by Noah.
Additionally, note the risk regarding concurrently open transactions
where a relation which controls access to the rows of another relation
are updated and the rows of the primary relation are also being
modified. Pointed out by Peter Geoghegan.
Back-patch to 9.5.
This has worked that way for a long time, maybe always, but you would
not have known it from the documentation. Also back-patch the notes
I added to HEAD earlier today about behavior of the "-f -" switch,
which likewise have been valid for many releases.
Commit d5563d7df9 drew complaints from Coverity, which quite
correctly complained that one copy of each -c or -f string was being
leaked. What's more, simple_action_list_append was allocating enough space
for still a third copy of each string as part of the SimpleActionListCell,
even though that coding method had been superseded by a separate strdup
operation. There were some other minor coding infelicities too. The
documentation needed more work as well, eg it forgot to explain that -c
causes psql not to accept any interactive input.
To support this, we must reconcile some historical anomalies in the
behavior of -c. In particular, as a backward-incompatibility, -c no
longer implies --no-psqlrc.
Pavel Stehule (code) and Catalin Iacob (documentation). Review by
Michael Paquier and myself. Proposed behavior per Tom Lane.
Commit e7cb7ee145 provided basic
infrastructure for allowing a foreign data wrapper or custom scan
provider to replace a join of one or more tables with a scan.
However, this infrastructure failed to take into account the need
for possible EvalPlanQual rechecks, and ExecScanFetch would fail
an assertion (or just overwrite memory) if such a check was attempted
for a plan containing a pushed-down join. To fix, adjust the EPQ
machinery to skip some processing steps when scanrelid == 0, making
those the responsibility of scan's recheck method, which also has
the responsibility in this case of correctly populating the relevant
slot.
To allow foreign scans to gain control in the right place to make
use of this new facility, add a new, optional RecheckForeignScan
method. Also, allow a foreign scan to have a child plan, which can
be used to correctly populate the slot (or perhaps for something
else, but this is the only use currently envisioned).
KaiGai Kohei, reviewed by Robert Haas, Etsuro Fujita, and Kyotaro
Horiguchi.
Commit d04c8ed904 added another support function to the GIST API,
but overlooked mentioning it in xindex.sgml's summary of index support
functions.
Anastasia Lubennikova
In commit 1ea0c73c2 I added a section to user-manag.sgml about how to drop
roles that own objects; but as pointed out by Stephen Frost, I neglected
that shared objects (databases or tablespaces) may need special treatment.
Fix that. Back-patch to supported versions, like the previous patch.
Allow pg_rewind to work when target timeline was switched. Now
user can return promoted standby to old master.
Target timeline history becomes a global variable. Index
in target timeline history is used in function interfaces instead of
specifying TLI directly. Thus, SimpleXLogPageRead() can easily start
reading XLOGs from next timeline when current timeline ends.
Author: Alexander Korotkov
Review: Michael Paquier
Previously, if no host information had been specified at connection time,
PQhost() would return NULL (unless you are on Windows, in which case you
got "localhost"). This is an unhelpful definition for a couple of reasons:
it can cause corner-case crashes in applications (cf commit c5ef8ce53d),
and there's no well-defined way for applications to find out the socket
directory path that's actually in use. As an example of the latter
problem, psql substituted DEFAULT_PGSOCKET_DIR for NULL in a couple of
places, but this is subtly wrong because it's conceivable that psql is
using a libpq shared library that was built with a different setting.
Hence, change PQhost() to return DEFAULT_PGSOCKET_DIR when appropriate,
and strip out the now-dead substitutions in psql. (There is still one
remaining reference to DEFAULT_PGSOCKET_DIR in psql, in prompt.c, which
I don't see a nice way to get rid of. But it only controls a prompt
abbreviation decision, so it seems noncritical.)
Also update the docs for PQhost, which had never previously mentioned
the possibility of a socket directory path being returned. In passing
fix the outright-incorrect code comment about PGconn.pgunixsocket.
The POSIX standard for tar headers requires archive member sizes to be
printed in octal with at most 11 digits, limiting the representable file
size to 8GB. However, GNU tar and apparently most other modern tars
support a convention in which oversized values can be stored in base-256,
allowing any practical file to be a tar member. Adopt this convention
to remove two limitations:
* pg_dump with -Ft output format failed if the contents of any one table
exceeded 8GB.
* pg_basebackup failed if the data directory contained any file exceeding
8GB. (This would be a fatal problem for installations configured with a
table segment size of 8GB or more, and it has also been seen to fail when
large core dump files exist in the data directory.)
File sizes under 8GB are still printed in octal, so that no compatibility
issues are created except in cases that would have failed entirely before.
In addition, this patch fixes several bugs in the same area:
* In 9.3 and later, we'd defined tarCreateHeader's file-size argument as
size_t, which meant that on 32-bit machines it would write a corrupt tar
header for file sizes between 4GB and 8GB, even though no error was raised.
This broke both "pg_dump -Ft" and pg_basebackup for such cases.
* pg_restore from a tar archive would fail on tables of size between 4GB
and 8GB, on machines where either "size_t" or "unsigned long" is 32 bits.
This happened even with an archive file not affected by the previous bug.
* pg_basebackup would fail if there were files of size between 4GB and 8GB,
even on 64-bit machines.
* In 9.3 and later, "pg_basebackup -Ft" failed entirely, for any file size,
on 64-bit big-endian machines.
In view of these potential data-loss bugs, back-patch to all supported
branches, even though removal of the documented 8GB limit might otherwise
be considered a new feature rather than a bug fix.
The sepgsql docs included a comment that PG doesn't support RLS. That
is only true for versions prior to 9.5.
Update the docs for 9.5 and master to say that PG supports RLS but that
sepgsql does not yet.
Pointed out by Heikki.
Back-patch to 9.5
Commit a0d9f6e434 added this support for
all other plan node types; this fills in the gap.
Since TextOutCustomScan complicates this and is pretty well useless,
remove it.
KaiGai Kohei, with some modifications by me.
Also fill in the previously empty "major enhancements" list. YMMV as to
which items should make the cut, but it's past time we had something more
than a placeholder here.
(I meant to get this done before beta2 was wrapped, but got distracted by
PDF build problems. Better late than never.)
These were discussed in three different sections of the manual, which
unsurprisingly had diverged over time; and the descriptions of individual
variables lacked stylistic consistency even within each section (and
frequently weren't in very good English anyway). Clean up the mess, and
remove some of the redundant information in hopes that future additions
will be less likely to re-introduce inconsistency. For instance I see
no need for maintenance.sgml to include its very own list of all the
autovacuum storage parameters, especially since that list was already
incomplete.
Commit 8457d0beca introduced an example which, while not incorrect,
failed to exhibit the behavior it meant to describe, as a result of omitting
an E'' prefix that needed to be there. Noticed and fixed by Peter Geoghegan.
I (tgl) failed to resist the temptation to wordsmith nearby text a bit
while at it.
In commit a5ec86a7c7 I wrote a quick hack
that reduced the number of TeX string pool entries created while converting
our documentation to PDF form. That held the fort for awhile, but as of
HEAD we're back up against the same limitation. It turns out that the
original coding of \FlowObjectSetup actually results in *three* string pool
entries being generated for every "flow object" (that is, potential
cross-reference target) in the documentation, and my previous hack only got
rid of one of them. With a little more care, we can reduce the string
count to one per flow object plus one per actually-cross-referenced flow
object (about 115000 + 5000 as of current HEAD); that should work until
the documentation volume roughly doubles from where it is today.
As a not-incidental side benefit, this change also causes pdfjadetex to
stop emitting unreferenced hyperlink anchors (bookmarks) into the PDF file.
It had been making one willy-nilly for every flow object; now it's just one
per actually-cross-referenced object. This results in close to a 2X
savings in PDF file size. We will still want to run the output through
"jpdftweak" to get it to be compressed; but we no longer need removal of
unreferenced bookmarks, so we might be able to find a quicker tool for
that step.
Although the failure only affects HEAD and US-format output at the moment,
9.5 cannot be more than a few pages short of failing likewise, so it
will inevitably fail after a few rounds of minor-version release notes.
I don't have a lot of faith that we'll never hit the limit in the older
branches; and anyway it would be nice to get rid of jpdftweak across the
board. Therefore, back-patch to all supported branches.
Per discussion, the original name was a bit misleading, and
PQsslAttributeNames() seems more apropos. It's not quite too late to
change this in 9.5, so let's change it while we can.
Also, make sure that the pointer array is const, not only the pointed-to
strings.
Minor documentation wordsmithing while at it.
Lars Kanis, slight adjustments by me
Up until now, the total amount of data that could be passed to a
background worker at startup was one datum, which can be a small as
4 bytes on some systems. That's enough to pass a dsm_handle or an
array index, but not much else. Add a bgw_extra flag to the
BackgroundWorker struct, allowing up to 128 bytes to be passed to
a new worker on any platform.
Use this to fix a problem I recently discovered with the parallel
context machinery added in 9.5: the master assigns each worker an
array index, and each worker subsequently assigns itself an array
index, and there's nothing to guarantee that the two sets of indexes
match, leading to chaos.
Normally, I would not back-patch the change to add bgw_extra, since it
is basically a feature addition. However, since 9.5 is still in beta
and there seems to be no other sensible way to repair the broken
parallel context machinery, back-patch to 9.5. Existing background
worker code can ignore the bgw_extra field without a problem, but
might need to be recompiled since the structure size has changed.
Report and patch by me. Review by Amit Kapila.
The user can whitelist specified extension(s) in the foreign server's
options, whereupon we will treat immutable functions and operators of those
extensions as candidates to be sent for remote execution.
Whitelisting an extension in this way basically promises that the extension
exists on the remote server and behaves compatibly with the local instance.
We have no way to prove that formally, so we have to rely on the user to
get it right. But this seems like something that people can usually get
right in practice.
We might in future allow functions and operators to be whitelisted
individually, but extension granularity is a very convenient special case,
so it got done first.
The patch as-committed lacks any regression tests, which is unfortunate,
but introducing dependencies on other extensions for testing purposes
would break "make installcheck" scenarios, which is worse. I have some
ideas about klugy ways around that, but it seems like material for a
separate patch. For the moment, leave the problem open.
Paul Ramsey, hacked up a bit more by me
Standard-conforming literals have been the default for long enough that
it no longer seems necessary to go out of our way to tell people to write
regex escapes illegibly.
Fix some brain fade in commit a2dabf0e1d: erroneous variable names
in docs, rearrangements that made sentences less clear not more so,
undocumented and poorly-chosen-anyway API behaviors of subroutines,
bad grammar in error messages, copy-and-paste faults.
Albe Laurenz and Tom Lane
A lookbehind constraint is like a lookahead constraint in that it consumes
no text; but it checks for existence (or nonexistence) of a match *ending*
at the current point in the string, rather than one *starting* at the
current point. This is a long-requested feature since it exists in many
other regex libraries, but Henry Spencer had never got around to
implementing it in the code we use.
Just making it work is actually pretty trivial; but naive copying of the
logic for lookahead constraints leads to code that often spends O(N^2) time
to scan an N-character string, because we have to run the match engine
from string start to the current probe point each time the constraint is
checked. In typical use-cases a lookbehind constraint will be written at
the start of the regex and hence will need to be checked at every character
--- so O(N^2) work overall. To fix that, I introduced a third copy of the
core DFA matching loop, paralleling the existing longest() and shortest()
loops. This version, matchuntil(), can suspend and resume matching given
a couple of pointers' worth of storage space. So we need only run it
across the string once, stopping at each interesting probe point and then
resuming to advance to the next one.
I also put in an optimization that simplifies one-character lookahead and
lookbehind constraints, such as "(?=x)" or "(?<!\w)", into AHEAD and BEHIND
constraints, which already existed in the engine. This avoids the overhead
of the LACON machinery entirely for these rather common cases.
The net result is that lookbehind constraints run a factor of three or so
slower than Perl's for multi-character constraints, but faster than Perl's
for one-character constraints ... and they work fine for variable-length
constraints, which Perl gives up on entirely. So that's not bad from a
competitive perspective, and there's room for further optimization if
anyone cares. (In reality, raw scan rate across a large input string is
probably not that big a deal for Postgres usage anyway; so I'm happy if
it's linear.)
Show how this can be used in practice to make queries simpler and more
flexible. Also, draw an explicit contrast to the existence operator,
which doesn't work that way.
Peter Geoghegan and Tom Lane
Once upon a time we did not have a separate CREATEROLE privilege, and
CREATEUSER effectively meant SUPERUSER. When we invented CREATEROLE
(in 8.1) we also added SUPERUSER so as to have a less confusing keyword
for this role property. However, we left CREATEUSER in place as a
deprecated synonym for SUPERUSER, because of backwards-compatibility
concerns. It's still there and is still confusing people, as for example
in bug #13694 from Justin Catterson. 9.6 will be ten years or so later,
which surely ought to be long enough to end the deprecation and just
remove these old keywords. Hence, do so.
This fixes a long-standing bug which was discovered while investigating
the interaction between the new join pushdown code and the EvalPlanQual
machinery: if a ForeignScan appears on the inner side of a paramaterized
nestloop, an EPQ recheck would re-return the original tuple even if
it no longer satisfied the pushed-down quals due to changed parameter
values.
This fix adds a new member to ForeignScan and ForeignScanState and a
new argument to make_foreignscan, and requires changes to FDWs which
push down quals to populate that new argument with a list of quals they
have chosen to push down. Therefore, I'm only back-patching to 9.5,
even though the bug is not new in 9.5.
Etsuro Fujita, reviewed by me and by Kyotaro Horiguchi.
We hyphenate "fixed-length" earlier in the same sentence, and overall we
more often use "variable-length" rather than "variable length".
Nikolay Shaplov
In general one may have to run both REASSIGN OWNED and DROP OWNED to get
rid of all the dependencies of a role to be dropped. This was alluded to
in the REASSIGN OWNED man page, but not really spelled out in full; and in
any case the procedure ought to be documented in a more prominent place
than that. Add a section to the "Database Roles" chapter explaining this,
and do a bit of wordsmithing in the relevant commands' man pages.
Failure to perform garbage collection now has a user-visible effect, so
explain that and explain that reducing pgss_max is the way to prevent it.
Per gripe from Andrew Dunstan.
The documentation for the autovacuum_multixact_freeze_max_age and
autovacuum_freeze_max_age relation level parameters contained:
"Note that while you can set autovacuum_multixact_freeze_max_age very
small, or even zero, this is usually unwise since it will force frequent
vacuuming."
which hasn't been true since these options were made relation options,
instead of residing in the pg_autovacuum table (834a6da4f7).
Remove the outdated sentence. Even the lowered limits from 2596d70 are
high enough that this doesn't warrant calling out the risk in the CREATE
TABLE docs.
Per discussion with Tom Lane and Alvaro Herrera
Discussion: 26377.1443105453@sss.pgh.pa.us
Backpatch: 9.0- (in parts)
To allow users to force RLS to always be applied, even for table owners,
add ALTER TABLE .. FORCE ROW LEVEL SECURITY.
row_security=off overrides FORCE ROW LEVEL SECURITY, to ensure pg_dump
output is complete (by default).
Also add SECURITY_NOFORCE_RLS context to avoid data corruption when
ALTER TABLE .. FORCE ROW SECURITY is being used. The
SECURITY_NOFORCE_RLS security context is used only during referential
integrity checks and is only considered in check_enable_rls() after we
have already checked that the current user is the owner of the relation
(which should always be the case during referential integrity checks).
Back-patch to 9.5 where RLS was added.
Specifically, make its effect independent from the row_security GUC, and
make it affect permission checks pertinent to views the BYPASSRLS role
owns. The row_security GUC thereby ceases to change successful-query
behavior; it can only make a query fail with an error. Back-patch to
9.5, where BYPASSRLS was introduced.
Without CASCADE, if an extension has an unfullfilled dependency on
another extension, CREATE EXTENSION ERRORs out with "required extension
... is not installed". That is annoying, especially when that dependency
is an implementation detail of the extension, rather than something the
extension's user can make sense of.
In addition to CASCADE this also includes a small set of regression
tests around CREATE EXTENSION.
Author: Petr Jelinek, editorialized by Michael Paquier, Andres Freund
Reviewed-By: Michael Paquier, Andres Freund, Jeff Janes
Discussion: 557E0520.3040800@2ndquadrant.com
It's not terribly hard to devise regular expressions that take large
amounts of time and/or memory to process. Recent testing by Greg Stark has
also shown that machines with small stack limits can be driven to stack
overflow by suitably crafted regexps. While we intend to fix these things
as much as possible, it's probably impossible to eliminate slow-execution
cases altogether. In any case we don't want to treat such things as
security issues. The history of that code should already discourage
prudent DBAs from allowing execution of regexp patterns coming from
possibly-hostile sources, but it seems like a good idea to warn about the
hazard explicitly.
Currently, similar_escape() allows access to enough of the underlying
regexp behavior that the warning has to apply to SIMILAR TO as well.
We might be able to make it safer if we tightened things up to allow only
SQL-mandated capabilities in SIMILAR TO; but that would be a subtly
non-backwards-compatible change, so it requires discussion and probably
could not be back-patched.
Per discussion among pgsql-security list.
The "floatrange" example is a bit too simple because float8mi can be
used without any additional type conversion. Add an example that does
have to account for that, and do some minor other wordsmithing.
Previously it was documented that the details on HeapTupleHeaderData
struct could be found in htup.h. This is not correct because it's now
defined in htup_details.h.
Back-patch to 9.3 where the definition of HeapTupleHeaderData struct
was moved from htup.h to htup_details.h.
Michael Paquier
A Gather executor node runs any number of copies of a plan in an equal
number of workers and merges all of the results into a single tuple
stream. It can also run the plan itself, if the workers are
unavailable or haven't started up yet. It is intended to work with
the Partial Seq Scan node which will be added in future commits.
It could also be used to implement parallel query of a different sort
by itself, without help from Partial Seq Scan, if the single_copy mode
is used. In that mode, a worker executes the plan, and the parallel
leader does not, merely collecting the worker's results. So, a Gather
node could be inserted into a plan to split the execution of that plan
across two processes. Nested Gather nodes aren't currently supported,
but we might want to add support for that in the future.
There's nothing in the planner to actually generate Gather nodes yet,
so it's not quite time to break out the champagne. But we're getting
close.
Amit Kapila. Some designs suggestions were provided by me, and I also
reviewed the patch. Single-copy mode, documentation, and other minor
changes also by me.
With the arrival of the CUBE key word/feature, the index entries for the
cube extension and the CUBE feature were collapsed into one. Tweak the
entry for the cube extension so they are separate entries.
Every query of a single ENABLE ROW SECURITY table has two meanings, with
the row_security GUC selecting between them. With row_security=force
available, every function author would have been advised to either set
the GUC locally or test both meanings. Non-compliance would have
threatened reliability and, for SECURITY DEFINER functions, security.
Authors already face an obligation to account for search_path, and we
should not mimic that example. With this change, only BYPASSRLS roles
need exercise the aforementioned care. Back-patch to 9.5, where the
row_security GUC was introduced.
Since this narrows the domain of pg_db_role_setting.setconfig and
pg_proc.proconfig, one might bump catversion. A row_security=force
setting in one of those columns will elicit a clear message, so don't.
Commit 924bcf4f16 introduced a framework
for parallel computation in PostgreSQL that makes most but not all
built-in functions safe to execute in parallel mode. In order to have
parallel query, we'll need to be able to determine whether that query
contains functions (either built-in or user-defined) that cannot be
safely executed in parallel mode. This requires those functions to be
labeled, so this patch introduces an infrastructure for that. Some
functions currently labeled as safe may need to be revised depending on
how pending issues related to heavyweight locking under paralllelism
are resolved.
Parallel plans can't be used except for the case where the query will
run to completion. If portal execution were suspended, the parallel
mode restrictions would need to remain in effect during that time, but
that might make other queries fail. Therefore, this patch introduces
a framework that enables consideration of parallel plans only when it
is known that the plan will be run to completion. This probably needs
some refinement; for example, at bind time, we do not know whether a
query run via the extended protocol will be execution to completion or
run with a limited fetch count. Having the client indicate its
intentions at bind time would constitute a wire protocol break. Some
contexts in which parallel mode would be safe are not adjusted by this
patch; the default is not to try parallel plans except from call sites
that have been updated to say that such plans are OK.
This commit doesn't introduce any parallel paths or plans; it just
provides a way to determine whether they could potentially be used.
I'm committing it on the theory that the remaining parallel sequential
scan patches will also get committed to this release, hopefully in the
not-too-distant future.
Robert Haas and Amit Kapila. Reviewed (in earlier versions) by Noah
Misch.
The docs claimed that \uhhhh would be interpreted as a Unicode value
regardless of the database encoding, but it's never been implemented
that way: \uhhhh and \xhhhh actually mean exactly the same thing, namely
the character that pg_mb2wchar translates to 0xhhhh. Moreover we were
falsely dismissive of the usefulness of Unicode code points above FFFF.
Fix that.
It's been like this for ages, so back-patch to all supported branches.
This patch adds an option to replace the "time since pgbench run
started" with a Unix epoch timestamp in the progress report so that,
for instance, it is easier to compare timelines with pgsql log
Fabien COELHO <coelho@cri.ensmp.fr>
COMMENT supports POLICY but the documentation hadn't caught up with
that fact.
Patch by Charles Clavadetscher
Back-patch to 9.5 where POLICY was added.
Patch provides command line option --strict-names which requires that at
least one table/schema should present for each -t/-n option.
Pavel Stehule <pavel.stehule@gmail.com>
Per discussion, nowadays it is possible to have tablespaces that have
wildly different I/O characteristics from others. Setting different
effective_io_concurrency parameters for those has been measured to
improve performance.
Author: Julien Rouhaud
Reviewed by: Andres Freund
This new function provides information about SSL extensions present in
the X509 certificate used for the current connection.
Extension version updated to version 1.1.
Author: Дмитрий Воронин (Dmitry Voronin)
Reviewed by: Michael Paquier, Heikki Linnakangas, Álvaro Herrera
Since 6fcd885 it is possible to immediately reserve WAL when creating a
slot via pg_create_physical_replication_slot(). Extend the replication
protocol to allow that as well.
Although, in contrast to the SQL interface, it is possible to update the
reserved location via the replication interface, it is still useful
being able to reserve upon creation there. Otherwise the logic in
ReplicationSlotReserveWal() has to be repeated in slot employing
clients.
Author: Michael Paquier
Discussion: CAB7nPqT0Wc1W5mdYGeJ_wbutbwNN+3qgrFR64avXaQCiJMGaYA@mail.gmail.com
Remove the code in plpgsql that suppressed the innermost line of CONTEXT
for messages emitted by RAISE commands. That was never more than a quick
backwards-compatibility hack, and it's pretty silly in cases where the
RAISE is nested in several levels of function. What's more, it violated
our design theory that verbosity of error reports should be controlled
on the client side not the server side.
To alleviate the resulting noise increase, introduce a feature in libpq
and psql whereby the CONTEXT field of messages can be suppressed, either
always or only for non-error messages. Printing CONTEXT for errors only
is now their default behavior.
The actual code changes here are pretty small, but the effects on the
regression test outputs are widespread. I had to edit some of the
alternative expected outputs by hand; hopefully the buildfarm will soon
find anything I fat-fingered.
In passing, fix up (again) the output line counts in psql's various
help displays. Add some commentary about how to verify them.
Pavel Stehule, reviewed by Petr Jelínek, Jeevan Chalke, and others
The setting values of some parameters including max_worker_processes
must be equal to or higher than the values on the master. However,
previously max_worker_processes was not listed as such parameter
in the document. So this commit adds it to that list.
Back-patch to 9.4 where max_worker_processes was added.
The default argument, if given, has to be of exactly the same datatype
as the first argument; but this was not stated in so many words, and
the error message you get about it might not lead your thought in the
right direction. Per bug #13587 from Robert McGehee.
A quick scan says that these are the only two built-in functions with two
anyelement arguments and no other polymorphic arguments. There are plenty
of cases of, eg, anyarray and anyelement, but those seem less likely to
confuse. For instance this doesn't seem terribly hard to figure out:
"function array_remove(integer[], numeric) does not exist". So I've
contented myself with fixing these two cases.
Although commit 79af9a1d2 was initially applied to HEAD only, we later
back-patched the change into all branches (commits 6bbf75192 et al).
So it's not a new behavior in 9.5 and should not be release-noted here.
This behavior wasn't documented, but it should be because it's user-visible
in triggers and other functions executed on the remote server.
Per question from Adam Fuchs.
Back-patch to 9.3 where postgres_fdw was added.
The table-rewriting forms of ALTER TABLE are MVCC-unsafe, in much the same
way as TRUNCATE, because they replace all rows of the table with newly-made
rows with a new xmin. (Ideally, concurrent transactions with old snapshots
would continue to see the old table contents, but the data is not there
anymore --- and if it were there, it would be inconsistent with the table's
updated rowtype, so there would be serious implementation problems to fix.)
This was nowhere documented though, and the problem was only documented for
TRUNCATE in a note in the TRUNCATE reference page. Create a new "Caveats"
section in the MVCC chapter that can be home to this and other limitations
on serializable consistency.
In passing, fix a mistaken statement that VACUUM and CLUSTER would reclaim
space occupied by a dropped column. They don't reconstruct existing tuples
so they couldn't do that.
Back-patch to all supported branches.
Reduce lock levels down to ShareUpdateExclusiveLock for all autovacuum-related
relation options when setting them using ALTER TABLE.
Add infrastructure to allow varying lock levels for relation options in later
patches. Setting multiple options together uses the highest lock level required
for any option. Works for both main and toast tables.
Fabrízio Mello, reviewed by Michael Paquier, mild edit and additional regression
tests from myself
Fix docs build failure introduced by commit 6fcd88511f.
I failed to resist the temptation to rearrange the description of
pg_create_physical_replication_slot(), too.
When creating a physical slot it's often useful to immediately reserve
the current WAL position instead of only doing after the first feedback
message arrives. That e.g. allows slots to guarantee that all the WAL
for a base backup will be available afterwards.
Logical slots already have to reserve WAL during creation, so generalize
that logic into being usable for both physical and logical slots.
Catversion bump because of the new parameter.
Author: Gurjeet Singh
Reviewed-By: Andres Freund
Discussion: CABwTF4Wh_dBCzTU=49pFXR6coR4NW1ynb+vBqT+Po=7fuq5iCw@mail.gmail.com
There's no reason not to expose both restart_lsn and confirmed_flush
since they have rather distinct meanings. The former is the oldest WAL
still required and valid for both physical and logical slots, whereas
the latter is the location up to which a logical slot's consumer has
confirmed receiving data. Most of the time a slot will require older
WAL (i.e. restart_lsn) than the confirmed
position (i.e. confirmed_flush_lsn).
Author: Marko Tiikkaja, editorialized by me
Discussion: 559D110B.1020109@joh.to
Immediately starting to stream after --create-slot is inconvenient in a
number of situations (e.g. when configuring a slot for use in
recovery.conf) and it's easy to just call pg_receivexlog twice in the
rest of the cases.
Author: Michael Paquier
Discussion: CAB7nPqQ9qEtuDiKY3OpNzHcz5iUA+DUX9FcN9K8GUkCZvG7+Ew@mail.gmail.com
Backpatch: 9.5, where the option was introduced
The allowed syntax for OVERLAPS, viz "row OVERLAPS row", is sufficiently
constrained that we don't actually need a precedence declaration for
OVERLAPS; indeed removing this declaration does not change the generated
gram.c file at all. Let's remove it to avoid confusion about whether
OVERLAPS has precedence or not. If we ever generalize what we allow for
OVERLAPS, we might need to put back a precedence declaration for it,
but we might want some other level than what it has today --- and leaving
the declaration there would just risk confusion about whether that would
be an incompatible change.
Likewise, remove OVERLAPS from the documentation's precedence table.
Per discussion with Noah Misch. Back-patch to 9.5 where we hacked up some
nearby precedence decisions.
Amit reviewed the replication origins patch and made some good
points. Address them. This fixes typos in error messages, docs and
comments and adds a missing error check (although in a
should-never-happen scenario).
Discussion: CAA4eK1JqUBVeWWKwUmBPryFaje4190ug0y-OAUHWQ6tD83V4xg@mail.gmail.com
Backpatch: 9.5, where replication origins were introduced.
Make it more clear that bgw_main is usually not what you want. Put the
background worker flags in a variablelist rather than having them as
part of a paragraph. Explain important limits on how bgw_main_arg can
be used.
Craig Ringer, substantially revised by me.
On Windows, use listen_address=127.0.0.1 to allow TCP connections. We were
already using "pg_regress --config-auth" to set up HBA appropriately. The
standard_initdb helper function now sets up the server's
unix_socket_directories or listen_addresses in the config file, so that
they don't need to be specified in the pg_ctl command line anymore. That
way, the pg_ctl invocations in test programs don't need to differ between
Windows and Unix.
Add another helper function to configure the server's pg_hba.conf to allow
replication connections. The configuration is done similarly to "pg_regress
--config-auth": trust on domain sockets on Unix, and SSPI authentication on
Windows.
Replace calls to "cat" and "touch" programs with built-in perl code, as
those programs don't normally exist on Windows.
Add instructions in the docs on how to install IPC::Run on Windows. Adjust
vcregress.pl to not replace PERL5LIB completely in vcregress.pl, because
otherwise cannot install IPC::Run in a non-standard location easily.
Michael Paquier, reviewed by Noah Misch, some additional tweaking by me.
This option specifies a replication slot for WAL streaming (-X stream),
so that there can be continuous replication slot use between WAL
streaming during the base backup and the start of regular streaming
replication.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
CreatePolicy() and AlterPolicy() omit to create a pg_shdepend entry for
each role in the TO clause. Fix this by creating a new shared dependency
type called SHARED_DEPENDENCY_POLICY and assigning it to each role.
Reported by Noah Misch. Patch by me, reviewed by Alvaro Herrera.
Back-patch to 9.5 where RLS was introduced.
Although initdb has long discouraged use of a filesystem mount-point
directory as a PG data directory, this point was covered nowhere in the
user-facing documentation. Also, with the popularity of pg_upgrade,
we really need to recommend that the PG user own not only the data
directory but its parent directory too. (Without a writable parent
directory, operations such as "mv data data.old" fail immediately.
pg_upgrade itself doesn't do that, but wrapper scripts for it often do.)
Hence, adjust the "Creating a Database Cluster" section to address
these points. I also took the liberty of wordsmithing the discussion
of NFS a bit.
These considerations aren't by any means new, so back-patch to all
supported branches.
The pg_stats view is supposed to be restricted to only show rows
about tables the user can read. However, it sometimes can leak
information which could not otherwise be seen when row level security
is enabled. Fix that by not showing pg_stats rows to users that would
be subject to RLS on the table the row is related to. This is done
by creating/using the newly introduced SQL visible function,
row_security_active().
Along the way, clean up three call sites of check_enable_rls(). The second
argument of that function should only be specified as other than
InvalidOid when we are checking as a different user than the current one,
as in when querying through a view. These sites were passing GetUserId()
instead of InvalidOid, which can cause the function to return incorrect
results if the current user has the BYPASSRLS privilege and row_security
has been set to OFF.
Additionally fix a bug causing RI Trigger error messages to unintentionally
leak information when RLS is enabled, and other minor cleanup and
improvements. Also add WITH (security_barrier) to the definition of pg_stats.
Bumped CATVERSION due to new SQL functions and pg_stats view definition.
Back-patch to 9.5 where RLS was introduced. Reported by Yaroslav.
Patch by Joe Conway and Dean Rasheed with review and input by
Michael Paquier and Stephen Frost.
While postgres' use of SSL renegotiation is a good idea in theory, it
turned out to not work well in practice. The specification and openssl's
implementation of it have lead to several security issues. Postgres' use
of renegotiation also had its share of bugs.
Additionally OpenSSL has a bunch of bugs around renegotiation, reported
and open for years, that regularly lead to connections breaking with
obscure error messages. We tried increasingly complex workarounds to get
around these bugs, but we didn't find anything complete.
Since these connection breakages often lead to hard to debug problems,
e.g. spuriously failing base backups and significant latency spikes when
synchronous replication is used, we have decided to change the default
setting for ssl renegotiation to 0 (disabled) in the released
backbranches and remove it entirely in 9.5 and master.
Author: Andres Freund
Discussion: 20150624144148.GQ4797@alap3.anarazel.de
Backpatch: 9.5 and master, 9.0-9.4 get a different patch
The original implementation of TABLESAMPLE modeled the tablesample method
API on index access methods, which wasn't a good choice because, without
specialized DDL commands, there's no way to build an extension that can
implement a TSM. (Raw inserts into system catalogs are not an acceptable
thing to do, because we can't undo them during DROP EXTENSION, nor will
pg_upgrade behave sanely.) Instead adopt an API more like procedural
language handlers or foreign data wrappers, wherein the only SQL-level
support object needed is a single handler function identified by having
a special return type. This lets us get rid of the supporting catalog
altogether, so that no custom DDL support is needed for the feature.
Adjust the API so that it can support non-constant tablesample arguments
(the original coding assumed we could evaluate the argument expressions at
ExecInitSampleScan time, which is undesirable even if it weren't outright
unsafe), and discourage sampling methods from looking at invisible tuples.
Make sure that the BERNOULLI and SYSTEM methods are genuinely repeatable
within and across queries, as required by the SQL standard, and deal more
honestly with methods that can't support that requirement.
Make a full code-review pass over the tablesample additions, and fix
assorted bugs, omissions, infelicities, and cosmetic issues (such as
failure to put the added code stanzas in a consistent ordering).
Improve EXPLAIN's output of tablesample plans, too.
Back-patch to 9.5 so that we don't have to support the original API
in production.
This removes some info about support procedures being used, which was
obsoleted by commit db5f98ab4f, as well as add some more documentation
on how to create new opclasses using the Minmax infrastructure.
(Hopefully we can get something similar for Inclusion as well.)
In passing, fix some obsolete mentions of "mmtuples" in source code
comments.
Backpatch to 9.5, where BRIN was introduced.
Previously, there was an inconsistency across json/jsonb operators that
operate on datums containing JSON arrays -- only some operators
supported negative array count-from-the-end subscripting. Specifically,
only a new-to-9.5 jsonb deletion operator had support (the new "jsonb -
integer" operator). This inconsistency seemed likely to be
counter-intuitive to users. To fix, allow all places where the user can
supply an integer subscript to accept a negative subscript value,
including path-orientated operators and functions, as well as other
extraction operators. This will need to be called out as an
incompatibility in the 9.5 release notes, since it's possible that users
are relying on certain established extraction operators changed here
yielding NULL in the event of a negative subscript.
For the json type, this requires adding a way of cheaply getting the
total JSON array element count ahead of time when parsing arrays with a
negative subscript involved, necessitating an ad-hoc lex and parse.
This is followed by a "conversion" from a negative subscript to its
equivalent positive-wise value using the count. From there on, it's as
if a positive-wise value was originally provided.
Note that there is still a minor inconsistency here across jsonb
deletion operators. Unlike the aforementioned new "-" deletion operator
that accepts an integer on its right hand side, the new "#-" path
orientated deletion variant does not throw an error when it appears like
an array subscript (input that could be recognized by as an integer
literal) is being used on an object, which is wrong-headed. The reason
for not being stricter is that it could be the case that an object pair
happens to have a key value that looks like an integer; in general,
these two possibilities are impossible to differentiate with rhs path
text[] argument elements. However, we still don't allow the "#-"
path-orientated deletion operator to perform array-style subscripting.
Rather, we just return the original left operand value in the event of a
negative subscript (which seems analogous to how the established
"jsonb/json #> text[]" path-orientated operator may yield NULL in the
event of an invalid subscript).
In passing, make SetArrayPath() stricter about not accepting cases where
there is trailing non-numeric garbage bytes rather than a clean NUL
byte. This means, for example, that strings like "10e10" are now not
accepted as an array subscript of 10 by some new-to-9.5 path-orientated
jsonb operators (e.g. the new #- operator). Finally, remove dead code
for jsonb subscript deletion; arguably, this should have been done in
commit b81c7b409.
Peter Geoghegan and Andrew Dunstan
This tells you what fraction of NOTIFY's queue is currently filled.
Brendan Jurd, reviewed by Merlin Moncure and Gurjeet Singh. A few
further tweaks by me.
Other options cannot be changed, as it's not totally clear if cached plans
would need to be invalidated if one of the other options change. Selectivity
estimator functions only change plan costs, not correctness of plans, so
those should be safe.
Original patch by Uriy Zhuravlev, heavily edited by me.
pg_receivexlog and pg_recvlogical error out when --create-slot is
specified and a slot with the same name already exists. In some cases,
especially with pg_receivexlog, that's rather annoying and requires
additional scripting.
Backpatch to 9.5 as slot control functions have newly been added to
pg_receivexlog, and there doesn't seem much point leaving it in a less
useful state.
Discussion: 20150619144755.GG29350@alap3.anarazel.de
Commit 31eae602 added new syntax to many DDL commands to use CURRENT_USER
or SESSION_USER instead of role name in ALTER ... OWNER TO, but because
of a misplaced '{', the syntax in the docs implied that the syntax was
"ALTER ... CURRENT_USER", instead of "ALTER ... OWNER TO CURRENT_USER".
Fix that, and also the funny indentation in some of the modified syntax
blurps.
The documentation implied that there was seldom any reason to use the
array_append, array_prepend, and array_cat functions directly. But that's
not really true, because they can help make it clear which case is meant,
which the || operator can't do since it's overloaded to represent all three
cases. Add some discussion and examples illustrating the potentially
confusing behavior that can ensue if the parser misinterprets what was
meant.
Per a complaint from Michael Herold. Back-patch to 9.2, which is where ||
started to behave this way.
When enabling wal_compression, there is a risk to leak data similarly to
the BREACH and CRIME attacks on SSL where the compression ratio of
a full page image gives a hint of what is the existing data of this page.
This vulnerability is quite cumbersome to exploit in practice, but doable.
So this patch makes wal_compression PGC_SUSET in order to prevent
non-superusers from enabling it and exploiting the vulnerability while
DBA thinks the risk very seriously and disables it in postgresql.conf.
Back-patch to 9.5 where wal_compression was introduced.
Tom fixed another one of these in commit 7f32dbcd, but there was another
almost identical one in libpq docs. Per his comment:
HP's web server has apparently become case-sensitive sometime recently.
Per bug #13479 from Daniel Abraham. Corrected link identified by Alvaro.
The .backup file name can be passed to pg_archivecleanup even if
it includes the extension which is specified in -x option.
However, previously the document incorrectly warned a user
not to do that.
Back-patch to 9.2 where pg_archivecleanup's -x option and
the warning were added.
Commit de76884 changed an archive recovery so that the last WAL
segment with old timeline was renamed with suffix .partial. It should
have updated WAL-related utilities so that they can handle such
.paritial WAL files, but we forgot that.
This patch changes pg_archivecleanup so that it can clean up even
archived WAL files with .partial suffix. Also it allows us to specify
.partial WAL file name as the command-line argument "oldestkeptwalfile".
This patch also changes pg_resetxlog so that it can remove .partial
WAL files in pg_xlog directory.
pg_xlogdump cannot handle .partial WAL files. Per discussion,
we decided only to document that limitation instead of adding the fix.
Because a user can easily work around the limitation (i.e., just remove
.partial suffix from the file name) and the fix seems complicated for
very narrow use case.
Back-patch to 9.5 where the problem existed.
Review by Michael Paquier.
Discussion: http://www.postgresql.org/message-id/CAHGQGwGxMKnVHGgTfiig2Bt_2djec0in3-DLJmtg7+nEiidFdQ@mail.gmail.com
-t will now match views, foreign tables, materialized views, and sequences,
not only plain tables. This is more useful, and also more consistent with
the behavior of pg_dump's -t switch, which has always matched all relation
types.
We're still not there on matching pg_dump's behavior entirely, so mention
that in the docs.
Craig Ringer, reviewed by Pavel Stehule
This allows convenient checking for existence of a GUC from SQL, which is
particularly useful when dealing with custom variables.
David Christensen, reviewed by Jeevan Chalke
1) Add sgml comments referencing commits. This is useful to search for
missing items etc.
The comments containing the commit notes are an excerpt from:
git log --date=short \
--pretty='format:%cd [%h] %<(8,trunc)%cN: %<(48,trunc)%s%n%n%w(,4,4)%b%n' \
$(git merge-base origin/master upstream/REL9_4_STABLE)..origin/master
2) Improve a handful of existing notes
3) Add missing entries about a couple features.
4) Add a bunch of straight-forward FIXMEs
Minor corrections and clarifications. Notably, for stuff that got moved
out of contrib, make sure it's documented somewhere other than "Additional
Modules".
I'm sure these need more work, but that's all I have time for today.
Avoid memory leak from incorrect choice of how to free a StringInfo
(resetStringInfo doesn't do it). Now that pg_split_opts doesn't scribble
on the optstr, mark that as "const" for clarity. Attach the commentary in
protocol.sgml to the right place, and add documentation about the
user-visible effects of this change on postgres' -o option and libpq's
PGOPTIONS option.
As first committed, this view reported on the file contents as they were
at the last SIGHUP event. That's not as useful as reporting on the current
contents, and what's more, it didn't work right on Windows unless the
current session had serviced at least one SIGHUP. Therefore, arrange to
re-read the files when pg_show_all_settings() is called. This requires
only minor refactoring so that we can pass changeVal = false to
set_config_option() so that it won't actually apply any changes locally.
In addition, add error reporting so that errors that would prevent the
configuration files from being loaded, or would prevent individual settings
from being applied, are visible directly in the view. This makes the view
usable for pre-testing whether edits made in the config files will have the
desired effect, before one actually issues a SIGHUP.
I also added an "applied" column so that it's easy to identify entries that
are superseded by later entries; this was the main use-case for the original
design, but it seemed unnecessarily hard to use for that.
Also fix a 9.4.1 regression that allowed multiple entries for a
PGC_POSTMASTER variable to cause bogus complaints in the postmaster log.
(The issue here was that commit bf007a27ac unintentionally reverted
3e3f65973a, which suppressed any duplicate entries within
ParseConfigFp. However, since the original coding of the pg_file_settings
view depended on such suppression *not* happening, we couldn't have fixed
this issue now without first doing something with pg_file_settings.
Now we suppress duplicates by marking them "ignored" within
ProcessConfigFileInternal, which doesn't hide them in the view.)
Lesser changes include:
Drive the view directly off the ConfigVariable list, instead of making a
basically-equivalent second copy of the data. There's no longer any need
to hang onto the data permanently, anyway.
Convert show_all_file_settings() to do its work in one call and return a
tuplestore; this avoids risks associated with assuming that the GUC state
will hold still over the course of query execution. (I think there were
probably latent bugs here, though you might need something like a cursor
on the view to expose them.)
Arrange to run SIGHUP processing in a short-lived memory context, to
forestall process-lifespan memory leaks. (There is one known leak in this
code, in ProcessConfigDirectory; it seems minor enough to not be worth
back-patching a specific fix for.)
Remove mistaken assignment to ConfigFileLineno that caused line counting
after an include_dir directive to be completely wrong.
Add missed failure check in AlterSystemSetConfigFile(). We don't really
expect ParseConfigFp() to fail, but that's not an excuse for not checking.
When archive recovery and restartpoints were initially introduced,
checkpoint_segments was ignored on the grounds that the files restored from
archive don't consume any space in the recovery server. That was changed in
later releases, but even then it was arguably a feature rather than a bug,
as performing restartpoints as often as checkpoints during normal operation
might be excessive, but you might nevertheless not want to waste a lot of
space for pre-allocated WAL by setting checkpoint_segments to a high value.
But now that we have separate min_wal_size and max_wal_size settings, you
can bound WAL usage with max_wal_size, and still avoid consuming excessive
space usage by setting min_wal_size to a lower value, so that argument is
moot.
There are still some issues with actually limiting the space usage to
max_wal_size: restartpoints in recovery can only start after seeing the
checkpoint record, while a checkpoint starts flushing buffers as soon as
the redo-pointer is set. Restartpoint is paced to happen at the same
leisurily speed, determined by checkpoint_completion_target, as checkpoints,
but because they are started later, max_wal_size can be exceeded by upto
one checkpoint cycle's worth of WAL, depending on
checkpoint_completion_target. But that seems better than not trying at all,
and max_wal_size is a soft limit anyway.
The documentation already claimed that max_wal_size is obeyed in recovery,
so this just fixes the behaviour to match the docs. However, add some
weasel-words there to mention that max_wal_size may well be exceeded by
some amount in recovery.
This makes it possible to use the functions without getting errors, if there
is a chance that the file might be removed or renamed concurrently.
pg_rewind needs to do just that, although this could be useful for other
purposes too. (The changes to pg_rewind to use these functions will come in
a separate commit.)
The read_binary_file() function isn't very well-suited for extensions.c's
purposes anymore, if it ever was. So bite the bullet and make a copy of it
in extension.c, tailored for that use case. This seems better than the
accidental code reuse, even if it's a some more lines of code.
Michael Paquier, with plenty of kibitzing by me.
Allow CustomPath to have a list of paths, CustomPlan a list of plans,
and CustomPlanState a list of planstates known to the core system, so
that custom path/plan providers can more reasonably use this
infrastructure for nodes with multiple children.
KaiGai Kohei, per a design suggestion from Tom Lane, with some
further kibitzing by me.
Some of the entries in the inclusion opclasses where missing operators,
and we had an entry for inet_inclusion_ops instead of
network_inclusion_ops. Sort the operators within each opclass by
strategy number, just to make it easier to spot mistakes.
Also sort the rows by data type name, rather than OID.
This adjusts commit 82233ce7ea so that the
postmaster does not exit until all its child processes have exited, even
if the 5-second timeout elapses and we have to send SIGKILL. There is no
great value in having the postmaster process quit sooner, and doing so can
mislead onlookers into thinking that the cluster is fully terminated when
actually some child processes still survive.
This effect might explain recent test failures on buildfarm member hamster,
wherein we failed to restart a cluster just after shutting it down with
"pg_ctl stop -m immediate".
I also did a bit of code review/beautification, including fixing a faulty
use of the Max() macro on a volatile expression.
Back-patch to 9.4. In older branches, the postmaster never waited for
children to exit during immediate shutdowns, and changing that would be
too much of a behavioral change.