This has been requested a few times, but the use-case for it was never
entirely clear. The reason for adding it now is that transmission of
error reports from parallel workers fails when NLS is active, because
pq_parse_errornotice() wrongly assumes that the existing severity field
is nonlocalized. There are other ways we could have fixed that, but the
other options were basically kluges, whereas this way provides something
that's at least arguably a useful feature along with the bug fix.
Per report from Jakob Egger. Back-patch into 9.6, because otherwise
parallel query is essentially unusable in non-English locales. The
problem exists in 9.5 as well, but we don't want to risk changing
on-the-wire behavior in 9.5 (even though the possibility of new error
fields is specifically called out in the protocol document). It may
be sufficient to leave the issue unfixed in 9.5, given the very limited
usefulness of pq_parse_errornotice in that version.
Discussion: <A88E0006-13CB-49C6-95CC-1A77D717213C@eggerapps.at>
ExecReScanAgg's check for whether it could re-use a previously calculated
hashtable neglected the possibility that the Agg node might reference
PARAM_EXEC Params that are not referenced by its input plan node. That's
okay if the Params are in upper tlist or qual expressions; but if one
appears in aggregate input expressions, then the hashtable contents need
to be recomputed when the Param's value changes.
To avoid unnecessary performance degradation in the case of a Param that
isn't within an aggregate input, add logic to the planner to determine
which Params are within aggregate inputs. This requires a new field in
struct Agg, but fortunately we never write plans to disk, so this isn't
an initdb-forcing change.
Per report from Jeevan Chalke. This has been broken since forever,
so back-patch to all supported branches.
Andrew Gierth, with minor adjustments by me
Report: <CAM2+6=VY8ykfLT5Q8vb9B6EbeBk-NGuLbT6seaQ+Fq4zXvrDcA@mail.gmail.com>
This seems to offer significantly better search performance than the
existing GiST opclass for inet/cidr, at least on data with a wide mix
of network mask lengths. (That may suggest that the data splitting
heuristics in the GiST opclass could be improved.)
Emre Hasegeli, with mostly-cosmetic adjustments by me
Discussion: <CAE2gYzxtth9qatW_OAqdOjykS0bxq7AYHLuyAQLPgT7H9ZU0Cw@mail.gmail.com>
If you have previously pinned a segment and decide that you don't
actually want to keep it around until shutdown, this new API lets you
remove the pin. This is pretty trivial except on Windows, where it
requires closing the duplicate handle that was used to implement the
pin.
Thomas Munro and Amit Kapila, reviewed by Amit Kapila and by me.
Previously, the spgSplitTuple action could only create a new upper tuple
containing a single labeled node. This made it useless for opclasses
that prefer to work with fixed sets of nodes (labeled or otherwise),
which meant that restrictive prefixes could not be used with such
node definitions. Change the output field set for the choose() method
to allow it to specify any valid node set for the new upper tuple,
and to specify which of these nodes to place the modified lower tuple in.
In addition to its primary use for fixed node sets, this feature could
allow existing opclasses that use variable node sets to skip a separate
spgAddNode action when splitting a tuple, by setting up the node needed
for the incoming value as part of the spgSplitTuple action. However, care
would have to be taken to add the extra node only when it would not make
the tuple bigger than before. (spgAddNode can enlarge the tuple,
spgSplitTuple can't.)
This is a prerequisite for an upcoming SP-GiST inet opclass, but is
being committed separately to increase the visibility of the API change.
In passing, improve the documentation about the traverse-values feature
that was added by commit ccd6eb49a.
Emre Hasegeli, with cosmetic adjustments and documentation rework by me
Discussion: <CAE2gYzxtth9qatW_OAqdOjykS0bxq7AYHLuyAQLPgT7H9ZU0Cw@mail.gmail.com>
Add a variant of txid_current() that returns NULL if no transaction ID
is assigned. This version can be used even on a standby server,
although it will always return NULL since no transaction IDs can be
assigned during recovery.
Craig Ringer, per suggestion from Jim Nasby. Reviewed by Petr Jelinek
and by me.
Merge several copies of "copy an inet value and adjust the mask length"
code to create a single, conveniently C-callable function. This function
is exported for future use by inet SPGiST support, but it's good cleanup
anyway since we had three slightly-different-for-no-good-reason copies.
(Extracted from a larger patch, to separate new code from refactoring
of old code)
Emre Hasegeli
In particular, left join to pg_authid so that rows in pg_stat_activity
don't disappear if the session's owning user has been dropped.
Also convert a few joins to pg_database to left joins, in the same spirit,
though that case might be harder to hit. We were doing this in other
views already, so it was a bit inconsistent that these views didn't.
Oskari Saarenmaa, with some further tweaking by me
Discussion: <56E87CD8.60007@ohmu.fi>
We need to scan the whole parse tree for parallel-unsafe functions.
If there are none, we'll later need to determine whether particular
subtrees contain any parallel-restricted functions. The previous coding
retained no knowledge from the first scan, even though this is very
wasteful in the common case where the query contains only parallel-safe
functions. We can bypass all of the later scans by remembering that fact.
This provides a small but measurable speed improvement when the case
applies, and shouldn't cost anything when it doesn't.
Patch by me, reviewed by Robert Haas
Discussion: <3740.1471538387@sss.pgh.pa.us>
pcolor was used to represent function arguments that are nominally of
type color, but when using a pre-ANSI C compiler would be passed as the
promoted integer type. We really don't need that anymore.
The regex library used to have a notion of a "collating element" that was
distinct from a "character", but Henry Spencer never actually implemented
his planned support for multi-character collating elements, and the Tcl
crew ripped out most of the stubs for that years ago. The only thing left
that distinguished the "celt" typedef from the "chr" typedef was that
"celt" was supposed to also be able to hold the not-a-character "NOCELT"
value. However, NOCELT was not used anywhere after the MCCE stub removal
changes, which means there's no need for celt to be different from chr.
Removing the separate typedef simplifies matters and also removes a trap
for the unwary, in that celt is signed while chr may not be, so comparisons
could mean different things. There's no bug there today because we
restrict CHR_MAX to be less than INT_MAX, but I think there may have been
such bugs before we did that, and there could be again if anyone ever
decides to fool with the range of chr.
This patch also removes assorted unnecessary casts to "chr" of values
that are already chrs. Many of these seem to be leftover from days when
the code was compatible with pre-ANSI C.
These types are storage-compatible with real arrays, but they don't support
toasting, so of course they can't support expansion either.
Per bug #14289 from Michael Overmeyer. Back-patch to 9.5 where expanded
arrays were introduced.
Report: <20160818174414.1529.37913@wrigleys.postgresql.org>
INSERT .. ON CONFLICT runs a pre-check of the possible conflicting
constraints before performing the actual speculative insertion. In case
the inserted tuple included TOASTed columns the ON CONFLICT condition
would be handled correctly in case the conflict was caught by the
pre-check, but if two transactions entered the speculative insertion
phase at the same time, one would have to re-try, and the code for
aborting a speculative insertion did not handle deleting the
speculatively inserted TOAST datums correctly.
TOAST deletion would fail with "ERROR: attempted to delete invisible
tuple" as we attempted to remove the TOAST tuples using
simple_heap_delete which reasoned that the given tuples should not be
visible to the command that wrote them.
This commit updates the heap_abort_speculative() function which aborts
the conflicting tuple to use itself, via toast_delete, for deleting
associated TOAST datums. Like before, the inserted toast rows are not
marked as being speculative.
This commit also adds a isolationtester spec test, exercising the
relevant code path. Unfortunately 9.5 cannot handle two waiting
sessions, and thus cannot execute this test.
Reported-By: Viren Negi, Oskari Saarenmaa
Author: Oskari Saarenmaa, edited a bit by me
Bug: #14150
Discussion: <20160519123338.12513.20271@wrigleys.postgresql.org>
Backpatch: 9.5, where ON CONFLICT was introduced
regexp_match() is like regexp_matches(), but it disallows the 'g' flag
and in consequence does not need to return a set. Instead, it returns
a simple text array value, or NULL if there's no match. Previously people
usually got that behavior with a sub-select, but this way is considerably
more efficient.
Documentation adjusted so that regexp_match() is presented first and then
regexp_matches() is introduced as a more complicated version. This is
a bit historically revisionist but seems pedagogically better.
Still TODO: extend contrib/citext to support this function.
Emre Hasegeli, reviewed by David Johnston
Discussion: <CAE2gYzy42sna2ME_e3y1KLQ-4UBrB-eVF0SWn8QG39sQSeVhEw@mail.gmail.com>
We implement a dozen or so parameterless functions that the SQL standard
defines special syntax for. Up to now, that was done by converting them
into more or less ad-hoc constructs such as "'now'::text::date". That's
messy for multiple reasons: it exposes what should be implementation
details to users, and performance is worse than it needs to be in several
cases. To improve matters, invent a new expression node type
SQLValueFunction that can represent any of these parameterless functions.
Bump catversion because this changes stored parsetrees for rules.
Discussion: <30058.1463091294@sss.pgh.pa.us>
This is somewhat cosmetic, since as long as you know what you are looking
at, "10.0" is a serviceable substitute for "10". But there is a potential
for confusion between version numbers with minor numbers and those without
--- we don't want people asking "why is psql saying 10.0 when my server is
10.2". Therefore, back-patch as far as practical, which turns out to be
9.3. I could have redone the patch to use fprintf(stderr) in place of
psql_error(), but it seems more work than is warranted for branches that
will be EOL or nearly so by the time v10 comes out.
Although only psql seems to contain any code that needs this, I chose
to put the support function into fe_utils, since it seems likely we'll
need it in other client programs in future. (In 9.3-9.5, use dumputils.c,
the predecessor of fe_utils/string_utils.c.)
In HEAD, also fix the backend code that whines about loadable-library
version mismatch. I don't see much need to back-patch that.
Prior to commit 7882c3b0b9, it was
possible to use LWLocks within DSM segments, but that commit broke
this use case by switching from a doubly linked list to a circular
linked list. Switch back, using a new bit of general infrastructure
for maintaining lists of PGPROCs.
Thomas Munro, reviewed by me.
This is a good bit more complicated than the average new-version stamping
commit, because it includes various adjustments in pursuit of changing
from three-part to two-part version numbers. It's likely some further
work will be needed around that change; but this is enough to get through
the regression tests, at least in Unix builds.
Peter Eisentraut and Tom Lane
NUMERIC_MAX_PRECISION is a purely arbitrary constraint on the precision
and scale you can write in a numeric typmod. It might once have had
something to do with the allowed range of a typmod-less numeric value,
but at least since 9.1 we've allowed, and documented that we allowed,
any value that would physically fit in the numeric storage format;
which is something over 100000 decimal digits, not 1000.
Hence, get rid of numeric_in()'s use of NUMERIC_MAX_PRECISION as a limit
on the allowed range of the exponent in scientific-format input. That was
especially silly in view of the fact that you can enter larger numbers as
long as you don't use 'e' to do it. Just constrain the value enough to
avoid localized overflow, and let make_result be the final arbiter of what
is too large. Likewise adjust ecpg's equivalent of this code.
Also get rid of numeric_recv()'s use of NUMERIC_MAX_PRECISION to limit the
number of base-NBASE digits it would accept. That created a dump/restore
hazard for binary COPY without doing anything useful; the wire-format
limit on number of digits (65535) is about as tight as we would want.
In HEAD, also get rid of pg_size_bytes()'s unnecessary intimacy with what
the numeric range limit is. That code doesn't exist in the back branches.
Per gripe from Aravind Kumar. Back-patch to all supported branches,
since they all contain the documentation claim about allowed range of
NUMERIC (cf commit cabf5d84b).
Discussion: <2895.1471195721@sss.pgh.pa.us>
Per discussion, we should provide such functions to replace the lost
ability to discover AM properties by inspecting pg_am (cf commit
65c5fcd35). The added functionality is also meant to displace any code
that was looking directly at pg_index.indoption, since we'd rather not
believe that the bit meanings in that field are part of any client API
contract.
As future-proofing, define the SQL API to not assume that properties that
are currently AM-wide or index-wide will remain so unless they logically
must be; instead, expose them only when inquiring about a specific index
or even specific index column. Also provide the ability for an index
AM to override the behavior.
In passing, document pg_am.amtype, overlooked in commit 473b93287.
Andrew Gierth, with kibitzing by me and others
Discussion: <87mvl5on7n.fsf@news-spur.riddles.org.uk>
Due to simplistic quoting and confusion of database names with conninfo
strings, roles with the CREATEDB or CREATEROLE option could escalate to
superuser privileges when a superuser next ran certain maintenance
commands. The new coding rule for PQconnectdbParams() calls, documented
at conninfo_array_parse(), is to pass expand_dbname=true and wrap
literal database names in a trivial connection string. Escape
zero-length values in appendConnStrVal(). Back-patch to 9.1 (all
supported versions).
Nathan Bossart, Michael Paquier, and Noah Misch. Reviewed by Peter
Eisentraut. Reported by Nathan Bossart.
Security: CVE-2016-5424
Rename these newly-extern functions with terms more typical of their new
neighbors. No functional changes; a subsequent commit will use them in
more places. Back-patch to 9.1 (all supported versions). Back branches
lack src/fe_utils, so instead rename the functions in place; the
subsequent commit will copy them into the other programs using them.
Security: CVE-2016-5424
If ANALYZE found no repeated non-null entries in its sample, it set the
column's stadistinct value to -1.0, intending to indicate that the entries
are all distinct. But what this value actually means is that the number
of distinct values is 100% of the table's rowcount, and thus it was
overestimating the number of distinct values by however many nulls there
are. This could lead to very poor selectivity estimates, as for example
in a recent report from Andreas Joseph Krogh. We should discount the
stadistinct value by whatever we've estimated the nulls fraction to be.
(That is what will happen if we choose to use a negative stadistinct for
a column that does have repeated entries, so this code path was just
inconsistent.)
In addition to fixing the stadistinct entries stored by several different
ANALYZE code paths, adjust the logic where get_variable_numdistinct()
forces an "all distinct" estimate on the basis of finding a relevant unique
index. Unique indexes don't reject nulls, so there's no reason to assume
that the null fraction doesn't apply.
Back-patch to all supported branches. Back-patching is a bit of a judgment
call, but this problem seems to affect only a few users (else we'd have
identified it long ago), and it's bad enough when it does happen that
destabilizing plan choices in a worse direction seems unlikely.
Patch by me, with documentation wording suggested by Dean Rasheed
Report: <VisenaEmail.26.df42f82acae38a58.156463942b8@tc7-visena>
Discussion: <16143.1470350371@sss.pgh.pa.us>
Discussion of commit 3e2f3c2e4 exposed a problem that is of longer
standing: since we don't detoast data while sticking it into a portal's
holdStore for PORTAL_ONE_RETURNING and PORTAL_UTIL_SELECT queries, and we
release the query's snapshot as soon as we're done loading the holdStore,
later readout of the holdStore can do TOAST fetches against data that can
no longer be seen by any of the session's live snapshots. This means that
a concurrent VACUUM could remove the TOAST data before we can fetch it.
Commit 3e2f3c2e4 exposed the problem by showing that sometimes we had *no*
live snapshots while fetching TOAST data, but we'd be at risk anyway.
I believe this code was all right when written, because our management of a
session's exposed xmin was such that the TOAST references were safe until
end of transaction. But that's no longer true now that we can advance or
clear our PGXACT.xmin intra-transaction.
To fix, copy the query's snapshot during FillPortalStore() and save it in
the Portal; release it only when the portal is dropped. This essentially
implements a policy that we must hold a relevant snapshot whenever we
access potentially-toasted data. We had already come to that conclusion
in other places, cf commits 08e261cbc9 and ec543db77b.
I'd have liked to add a regression test case for this, but I didn't see
a way to make one that's not unreasonably bloated; it seems to require
returning a toasted value to the client, and those will be big.
In passing, improve PortalRunUtility() so that it positively verifies
that its ending PopActiveSnapshot() call will pop the expected snapshot,
removing a rather shaky assumption about which utility commands might
do their own PopActiveSnapshot(). There's no known bug here, but now
that we're actively referencing the snapshot it's almost free to make
this code a bit more bulletproof.
We might want to consider back-patching something like this into older
branches, but it would be prudent to let it prove itself more in HEAD
beforehand.
Discussion: <87vazemeda.fsf@credativ.de>
tqual.h is included in some front-end compiles, and a static inline
breaks on buildfarm member castoroides. Since the macro is never
referenced, it should dodge that problem, although this doesn't
seem like the cleanest way of hiding things from front-end compiles.
Report and review by Tom Lane; patch by me.
Previously, we tested for MVCC snapshots to see whether they were too
old, but not TOAST snapshots, which can lead to complaints about missing
TOAST chunks if those chunks are subject to early pruning. Ideally,
the threshold lsn and timestamp for a TOAST snapshot would be that of
the corresponding MVCC snapshot, but since we have no way of deciding
which MVCC snapshot was used to fetch the TOAST pointer, use the oldest
active or registered snapshot instead.
Reported by Andres Freund, who also sketched out what the fix should
look like. Patch by me, reviewed by Amit Kapila.
Previously, if an INSERT with multiple rows of VALUES had indirection
(array subscripting or field selection) in its target-columns list, the
parser handled that by applying transformAssignedExpr() to each element
of each VALUES row independently. This led to having ArrayRef assignment
nodes or FieldStore nodes in each row of the VALUES RTE. That works for
simple cases, but in bug #14265 Nuri Boardman points out that it fails
if there are multiple assignments to elements/fields of the same target
column. For such cases to work, rewriteTargetListIU() has to nest the
ArrayRefs or FieldStores together to produce a single expression to be
assigned to the column. But it failed to find them in the top-level
targetlist and issued an error about "multiple assignments to same column".
We could possibly fix this by teaching the rewriter to apply
rewriteTargetListIU to each VALUES row separately, but that would be messy
(it would change the output rowtype of the VALUES RTE, for example) and
inefficient. Instead, let's fix the parser so that the VALUES RTE outputs
are just the user-specified values, cast to the right type if necessary,
and then the ArrayRefs or FieldStores are applied in the top-level
targetlist to Vars representing the RTE's outputs. This is the same
parsetree representation already used for similar cases with INSERT/SELECT
syntax, so it allows simplifications in ruleutils.c, which no longer needs
to treat INSERT-from-multiple-VALUES as its own special case.
This implementation works by applying transformAssignedExpr to the VALUES
entries as before, and then stripping off any ArrayRefs or FieldStores it
adds. With lots of VALUES rows it would be noticeably more efficient to
not add those nodes in the first place. But that's just an optimization
not a bug fix, and there doesn't seem to be any good way to do it without
significant refactoring. (A non-invasive answer would be to apply
transformAssignedExpr + stripping to just the first VALUES row, and then
just forcibly cast remaining rows to the same data types exposed in the
first row. But this way would lead to different, not-INSERT-specific
errors being reported in casting failure cases, so it doesn't seem very
nice.) So leave that for later; this patch at least isn't making the
per-row parsing work worse, and it does make the finished parsetree
smaller, saving rewriter and planner work.
Catversion bump because stored rules containing such INSERTs would need
to change. Because of that, no back-patch, even though this is a very
long-standing bug.
Report: <20160727005725.7438.26021@wrigleys.postgresql.org>
Discussion: <9578.1469645245@sss.pgh.pa.us>
ParallelMessagePending *must* be marked volatile, because it's set
by a signal handler. On the other hand, it's pointless for
HandleParallelMessageInterrupt to save/restore errno; that must be,
and is, done at the outer level of the SIGUSR1 signal handler.
Calling CHECK_FOR_INTERRUPTS() inside HandleParallelMessages, which itself
is called from CHECK_FOR_INTERRUPTS(), seems both useless and hazardous.
The comment claiming that this is needed to handle the error queue going
away is certainly misguided, in any case.
Improve a couple of error message texts, and use
ERRCODE_OBJECT_NOT_IN_PREREQUISITE_STATE to report loss of parallel worker
connection, since that's what's used in e.g. tqueue.c. (Maybe it would be
worth inventing a dedicated ERRCODE for this type of failure? But I do not
think ERRCODE_INTERNAL_ERROR is appropriate.)
Minor stylistic cleanups.
This coding pattern creates a race condition, because if an interesting
interrupt happens after we've checked InterruptPending but before we reset
our latch, the latch-setting done by the signal handler would get lost,
and then we might block at WaitLatch in the next iteration without ever
noticing the interrupt condition. You can put the CHECK_FOR_INTERRUPTS
before WaitLatch or after ResetLatch, but not between them.
Aside from fixing the bugs, add some explanatory comments to latch.h
to perhaps forestall the next person from making the same mistake.
In HEAD, also replace gather_readnext's direct call of
HandleParallelMessages with CHECK_FOR_INTERRUPTS. It does not seem clean
or useful for this one caller to bypass ProcessInterrupts and go straight
to HandleParallelMessages; not least because that fails to consider the
InterruptPending flag, resulting in useless work both here
(if InterruptPending isn't set) and in the next CHECK_FOR_INTERRUPTS call
(if it is).
This thinko seems to have been introduced in the initial coding of
storage/ipc/shm_mq.c (commit ec9037df2), and then blindly copied into all
the subsequent parallel-query support logic. Back-patch relevant hunks
to 9.4 to extirpate the error everywhere.
Discussion: <1661.1469996911@sss.pgh.pa.us>
The document specifies that pg_replication_origin_xact_reset function
doesn't have any argument variables. But previously it was actually
defined so as to have two argument variables, though they were not
used at all. That is, the pg_proc entry for that function was incorrect.
This patch fixes the pg_proc entry and removes those two arguments
from the function definition.
No back-patch because this change needs a catalog version bump
although the issue exists in 9.5 as well. Instead, a note about those
unused argument variables will be added to 9.5 document later.
Catalog version bumped due to the change of pg_proc.
TupleQueueReaderNext() leaks like a sieve if it has to do any tuple
disassembly/reconstruction. While we could try to clean up its allocations
piecemeal, it seems like a better idea just to insist that it should be run
in a short-lived memory context, so that any transient space goes away
automatically. I chose to have nodeGather.c switch into its existing
per-tuple context before the call, rather than inventing a separate
context inside tqueue.c.
This is sufficient to stop all leakage in the simple case I exhibited
earlier today (see link below), but it does not deal with leaks induced
in more complex cases by tqueue.c's insistence on using TopMemoryContext
for data that it's not actually trying hard to keep track of. That issue
is intertwined with another major source of inefficiency, namely failure
to cache lookup results across calls, so it seems best to deal with it
separately.
In passing, improve some comments, and modify gather_readnext's method for
deciding when it's visited all the readers so that it's more obviously
correct. (I'm not actually convinced that the previous code *is*
correct in the case of a reader deletion; it certainly seems fragile.)
Discussion: <32763.1469821037@sss.pgh.pa.us>
An evident copy-and-pasteo in commit 2bd9e412f broke the non-blocking
aspect of pq_putmessage_noblock(), causing it to behave identically to
pq_putmessage(). That function is nowadays used only in walsender.c,
so that the net effect was to cause walsenders to hang up waiting for
the receiver in situations where they should not.
Kyotaro Horiguchi
Patch: <20160728.185228.58375982.horiguchi.kyotaro@lab.ntt.co.jp>
Now that we've nailed down the principle that NullTest with !argisrow
is fully equivalent to SQL's IS [NOT] DISTINCT FROM NULL, let's teach
the parser about it. This produces a slightly more compact parse tree
and is much more amenable to optimization than a DistinctExpr, since
the planner knows a good deal about NullTest and next to nothing about
DistinctExpr.
I'm not sure that there are all that many queries in the wild that could
be improved by this, but at least one source of such cases is the patch
just made to postgres_fdw to emit IS [NOT] DISTINCT FROM NULL when
IS [NOT] NULL isn't semantically correct.
No back-patch, since to the extent that this does affect planning results,
it might be considered undesirable plan destabilization.
Commits 4452000f3 et al established semantics for NullTest.argisrow that
are a bit different from its initial conception: rather than being merely
a cache of whether we've determined the input to have composite type,
the flag now has the further meaning that we should apply field-by-field
testing as per the standard's definition of IS [NOT] NULL. If argisrow
is false and yet the input has composite type, the construct instead has
the semantics of IS [NOT] DISTINCT FROM NULL. Update the comments in
primnodes.h to clarify this, and fix ruleutils.c and deparse.c to print
such cases correctly. In the case of ruleutils.c, this merely results in
cosmetic changes in EXPLAIN output, since the case can't currently arise
in stored rules. However, it represents a live bug for deparse.c, which
would formerly have sent a remote query that had semantics different
from the local behavior. (From the user's standpoint, this means that
testing a remote nested-composite column for null-ness could have had
unexpected recursive behavior much like that fixed in 4452000f3.)
In a related but somewhat independent fix, make plancat.c set argisrow
to false in all NullTest expressions constructed to represent "attnotnull"
constructs. Since attnotnull is actually enforced as a simple null-value
check, this is a more accurate representation of the semantics; we were
previously overpromising what it meant for composite columns, which might
possibly lead to incorrect planner optimizations. (It seems that what the
SQL spec expects a NOT NULL constraint to mean is an IS NOT NULL test, so
arguably we are violating the spec and should fix attnotnull to do the
other thing. If we ever do, this part should get reverted.)
Back-patch, same as the previous commit.
Discussion: <10682.1469566308@sss.pgh.pa.us>
These functions were added in commits fbe5a3fb7 and a104a017f,
but commit 45639a052 removed their only callers. Put the related
code in foreign.c back to the way it was in 9.5, to avoid pointless
cross-version diffs.
Etsuro Fujita
Patch: <d674a3f1-6b63-519c-ef3f-f3188ed6a178@lab.ntt.co.jp>
Since a892234 & fd31cd265 the visibilitymap's freeze bit is used to
avoid vacuuming the whole relation in anti-wraparound vacuums. Doing so
correctly relies on not adding xids to the heap without also unsetting
the visibilitymap flag. Tuple locking related code has not done so.
To allow selectively resetting all-frozen - to avoid pessimizing
heap_lock_tuple - allow to selectively reset the all-frozen with
visibilitymap_clear(). To avoid having to use
visibilitymap_get_status (e.g. via VM_ALL_FROZEN) inside a critical
section, have visibilitymap_clear() return whether any bits have been
reset.
There's a remaining issue (denoted by XXX): After the PageIsAllVisible()
check in heap_lock_tuple() and heap_lock_updated_tuple_rec() the page
status could theoretically change. Practically that currently seems
impossible, because updaters will hold a page level pin already. Due to
the next beta coming up, it seems better to get the required WAL magic
bump done before resolving this issue.
The added flags field fields to xl_heap_lock and xl_heap_lock_updated
require bumping the WAL magic. Since there's already been a catversion
bump since the last beta, that's not an issue.
Reviewed-By: Robert Haas, Amit Kapila and Andres Freund
Author: Masahiko Sawada, heavily revised by Andres Freund
Discussion: CAEepm=3fWAbWryVW9swHyLTY4sXVf0xbLvXqOwUoDiNCx9mBjQ@mail.gmail.com
Backpatch: -
This should have been done in commit 73c986adde which added several
new fields to pg_control, and again in commit 5028f22f6e which
changed the CRC algorithm, but it wasn't. It's far too late to fix it in
the 9.5 branch, but let's do so in 9.6, so that if a 9.6 postmaster is
started against a 9.4-era pg_control it will complain about a versioning
problem rather than a CRC failure. We already forced initdb/pg_upgrade
for beta3, so there's no downside to doing this now.
Discussion: <7615.1468598094@sss.pgh.pa.us>
We must not push down a foreign join when the foreign tables involved
should be accessed under different user mappings. Previously we tried
to enforce that rule literally during planning, but that meant that the
resulting plans were dependent on the current contents of the
pg_user_mapping catalog, and we had to blow away all cached plans
containing any remote join when anything at all changed in pg_user_mapping.
This could have been improved somewhat, but the fact that a syscache inval
callback has very limited info about what changed made it hard to do better
within that design. Instead, let's change the planner to not consider user
mappings per se, but to allow a foreign join if both RTEs have the same
checkAsUser value. If they do, then they necessarily will use the same
user mapping at runtime, and we don't need to know specifically which one
that is. Post-plan-time changes in pg_user_mapping no longer require any
plan invalidation.
This rule does give up some optimization ability, to wit where two foreign
table references come from views with different owners or one's from a view
and one's directly in the query, but nonetheless the same user mapping
would have applied. We'll sacrifice the first case, but to not regress
more than we have to in the second case, allow a foreign join involving
both zero and nonzero checkAsUser values if the nonzero one is the same as
the prevailing effective userID. In that case, mark the plan as only
runnable by that userID.
The plancache code already had a notion of plans being userID-specific,
in order to support RLS. It was a little confused though, in particular
lacking clarity of thought as to whether it was the rewritten query or just
the finished plan that's dependent on the userID. Rearrange that code so
that it's clearer what depends on which, and so that the same logic applies
to both RLS-injected role dependency and foreign-join-injected role
dependency.
Note that this patch doesn't remove the other issue mentioned in the
original complaint, which is that while we'll reliably stop using a foreign
join if it's disallowed in a new context, we might fail to start using a
foreign join if it's now allowed, but we previously created a generic
cached plan that didn't use one. It was agreed that the chance of winning
that way was not high enough to justify the much larger number of plan
invalidations that would have to occur if we tried to cause it to happen.
In passing, clean up randomly-varying spelling of EXPLAIN commands in
postgres_fdw.sql, and fix a COSTS ON example that had been allowed to
leak into the committed tests.
This reverts most of commits fbe5a3fb7 and 5d4171d1c, which were the
previous attempt at ensuring we wouldn't push down foreign joins that
span permissions contexts.
Etsuro Fujita and Tom Lane
Discussion: <d49c1e5b-f059-20f4-c132-e9752ee0113e@lab.ntt.co.jp>
GiST index build could go into an infinite loop when presented with boxes
(or points, circles or polygons) containing NaN component values. This
happened essentially because the code assumed that x == x is true for any
"double" value x; but it's not true for NaNs. The looping behavior was not
the only problem though: we also attempted to sort the items using simple
double comparisons. Since NaNs violate the trichotomy law, qsort could
(in principle at least) get arbitrarily confused and mess up the sorting of
ordinary values as well as NaNs. And we based splitting choices on box size
calculations that could produce NaNs, again resulting in undesirable
behavior.
To fix, replace all comparisons of doubles in this logic with
float8_cmp_internal, which is NaN-aware and is careful to sort NaNs
consistently, higher than any non-NaN. Also rearrange the box size
calculation to not produce NaNs; instead it should produce an infinity
for a box with NaN on one side and not-NaN on the other.
I don't by any means claim that this solves all problems with NaNs in
geometric values, but it should at least make GiST index insertion work
reliably with such data. It's likely that the index search side of things
still needs some work, and probably regular geometric operations too.
But with this patch we're laying down a convention for how such cases
ought to behave.
Per bug #14238 from Guang-Dih Lei. Back-patch to 9.2; the code used before
commit 7f3bd86843 is quite different and doesn't lock up on my simple
test case, nor on the submitter's dataset.
Report: <20160708151747.1426.60150@wrigleys.postgresql.org>
Discussion: <28685.1468246504@sss.pgh.pa.us>
We have, for a very long time, allowed the same subplan (same member of the
PlannedStmt.subplans list) to be referenced by more than one SubPlan node;
this avoids problems for cases such as subplans within an IndexScan's
indxqual and indxqualorig fields. However, EXPLAIN had not gotten the memo
and would print each reference as though it were an independent identical
subplan. To fix, track plan_ids of subplans we've printed and don't print
the same plan_id twice. Per report from Pavel Stehule.
BTW: the particular case of IndexScan didn't cause visible duplication
in a plain EXPLAIN, only EXPLAIN ANALYZE, because in the former case we
short-circuit executor startup before the indxqual field is processed by
ExecInitExpr. That seems like it could easily lead to other EXPLAIN
problems in future, but it's not clear how to avoid it without breaking
the "EXPLAIN a plan using hypothetical indexes" use-case. For now I've
left that issue alone.
Although this is a longstanding bug, it's purely cosmetic (no great harm
is done by the repeat printout) and we haven't had field complaints before.
So I'm hesitant to back-patch it, especially since there is some small risk
of ABI problems due to the need to add a new field to ExplainState.
In passing, rearrange order of fields in ExplainState to be less random,
and update some obsolete comments about when/where to initialize them.
Report: <CAFj8pRAimq+NK-menjt+3J4-LFoodDD8Or6=Lc_stcFD+eD4DA@mail.gmail.com>
Per discussion on pgsql-hackers, conninfo is better as the column name
because it's more commonly used in PostgreSQL.
Catalog version bumped due to the change of pg_proc.
Author: Michael Paquier
In the previous design, the GetForeignUpperPaths FDW callback hook was
called before we got around to labeling upper relations with the proper
consider_parallel flag; this meant that any upper paths created by an FDW
would be marked not-parallel-safe. While that's probably just as well
right now, we aren't going to want it to be true forever. Hence, abandon
the idea that FDWs should be allowed to inject upper paths before the core
code has gotten around to creating the relevant upper relation. (Well,
actually they still can, but it's on their own heads how well it works.)
Instead, adopt the same API already designed for create_upper_paths_hook:
we call GetForeignUpperPaths after each upperrel has been created and
populated with the paths the core planner knows how to make.
Commit 3fc6e2d7f5 introduced new "upper"
RelOptInfo structures but didn't set consider_parallel for them
correctly, a point I completely missed when reviewing it. Later,
commit e06a38965b made the situation
worse by doing it incorrectly for the grouping relation. Try to
straighten all of that out. Along the way, get rid of the annoying
wholePlanParallelSafe flag, which was only necessarily because of
the fact that upper planning stages didn't use paths at the time
that code was written.
The most important immediate impact of these changes is that
force_parallel_mode will provide useful test coverage in quite a few
more scenarios than it did previously, but it's also necessary
preparation for fixing some problems related to subqueries.
Patch by me, reviewed by Tom Lane.
Previously, workers sent data to the leader using the client encoding.
That mostly worked, but the leader the converted the data back to the
server encoding. Since not all encoding conversions are reversible,
that could provoke failures. Fix by using the database encoding for
all communication between worker and leader.
Also, while temporary changes to GUC settings, as from the SET clause
of a function, are in general OK for parallel query, changing
client_encoding this way inside of a parallel worker is not OK.
Previously, that would have confused the leader; with these changes,
it would not confuse the leader, but it wouldn't do anything either.
So refuse such changes in parallel workers.
Also, the previous code naively assumed that when it received a
NotifyResonse from the worker, it could pass that directly back to the
user. But now that worker-to-leader communication always uses the
database encoding, that's clearly no longer correct - though,
actually, the old way was always broken for V2 clients. So
disassemble and reconstitute the message instead.
Issues reported by Peter Eisentraut. Patch by me, reviewed by
Peter Eisentraut.
In non-text output formats, parallelized aggregates were reporting
"Partial" or "Finalize" as a field named "Operation", which might be all
right in the absence of any context --- but other plan node types use that
field to report SQL-visible semantics, such as Select/Insert/Update/Delete.
So that naming choice didn't seem good to me. I changed it to "Partial
Mode".
Also, the field did not appear at all for a non-parallelized Agg plan node,
which is contrary to expectation in non-text formats. We're notionally
producing objects that conform to a schema, so the set of fields for a
given node type and EXPLAIN mode should be well-defined. I set it up to
fill in "Simple" in such cases.
Other fields that were added for parallel query, namely "Parallel Aware"
and Gather's "Single Copy", had not gotten the word on that point either.
Make them appear always in non-text output.
Also, the latter two fields were nominally producing boolean output, but
were getting it wrong, because bool values shouldn't be quoted in JSON or
YAML. Somehow we'd not needed an ExplainPropertyBool formatting subroutine
before 9.6; but now we do, so invent it.
Discussion: <16002.1466972724@sss.pgh.pa.us>
Commit b1a9bad9e7 introduced a stats view to provide insight into the
running WAL receiver, but neglected to include the connection string in
it, as reported by Michaël Paquier. This commit fixes that omission.
(Any security-sensitive information is not disclosed).
While at it, close the mild security hole that we were exposing the
password in the connection string in shared memory. This isn't
user-accessible, but it still looks like a good idea to avoid having the
cleartext password in memory.
Author: Michaël Paquier, Álvaro Herrera
Review by: Vik Fearing
Discussion: https://www.postgresql.org/message-id/CAB7nPqStg4M561obo7ryZ5G+fUydG4v1Ajs1xZT1ujtu+woRag@mail.gmail.com
Previously, these commands always planned the given query and went through
executor startup before deciding not to actually run the query if WITH NO
DATA is specified. This behavior is problematic for pg_dump because it
may cause errors to be raised that we would rather not see before a
REFRESH MATERIALIZED VIEW command is issued. See for example bug #13907
from Marian Krucina. This change is not sufficient to fix that particular
bug, because we also need to tweak pg_dump to issue the REFRESH later,
but it's a necessary step on the way.
A user-visible side effect of doing things this way is that the returned
command tag for WITH NO DATA cases will now be "CREATE MATERIALIZED VIEW"
or "CREATE TABLE AS", not "SELECT 0". We could preserve the old behavior
but it would take more code, and arguably that was just an implementation
artifact not intended behavior anyhow.
In 9.5 and HEAD, also get rid of the static variable CreateAsReladdr, which
was trouble waiting to happen; there is not any prohibition on nested
CREATE commands.
Back-patch to 9.3 where CREATE MATERIALIZED VIEW was introduced.
Michael Paquier and Tom Lane
Report: <20160202161407.2778.24659@wrigleys.postgresql.org>
<-> operator now have higher predecence than & (AND) operator. This change
was motivated by unexpected difference of similar queries:
'a & b <-> c'::tsquery and 'b <-> c & a'. Before first query means
(a & b) <-> c and second one - '(b <-> c) & a', now phrase operator evaluates
first.
Per suggestion from Tom Lane 32260.1465402409@sss.pgh.pa.us
If there is no positional information of lexemes then phrase operator will not
fallback to AND operator. This change makes needing to modify TS_execute()
interface, because somewhere (in indexes, for example) positional information
is unaccesible and in this cases we need to force fallback to AND.
Per discussion c19fcfec308e6ccd952cdde9e648b505@mail.gmail.com
It's rather silly to make a separate pass over the tlist + HAVING qual,
and a separate set of visits to the syscache, when get_agg_clause_costs
already has all the required information in hand. This nets out as less
code as well as fewer cycles.
The original coding had three separate booleans representing partial
aggregation behavior, which was confusing, unreadable, and error-prone,
not least because the booleans weren't always listed in the same order.
It was also inadequate for the allegedly-desirable future extension to
support intermediate partial aggregation, because we'd need separate
markers for serialization and deserialization in such a case.
Merge these bools into an enum "AggSplit" to provide symbolic names for
the supported operating modes (and document what those are). By assigning
the values of the enum constants carefully, we can treat AggSplit values
as options bitmasks so that tests of what to do aren't noticeably more
expensive than before.
While at it, get rid of Aggref.aggoutputtype. That's not needed since
commit 59a3795c2 got rid of setrefs.c's special-purpose Aggref comparison
code, and it likewise seemed more confusing than helpful.
Assorted comment cleanup as well (there's still more that I want to do
in that line).
catversion bump for change in Aggref node contents. Should be the last
one for partial-aggregation changes.
Discussion: <29309.1466699160@sss.pgh.pa.us>
Commit e06a38965's original coding for constructing the execution-time
expression tree for a combining aggregate was rather messy, involving
duplicating quite a lot of code in setrefs.c so that it could inject
a nonstandard matching rule for Aggrefs. Get rid of that in favor of
explicitly constructing a combining Aggref with a partial Aggref as input,
then allowing setref's normal matching logic to match the partial Aggref
to the output of the lower plan node and hence replace it with a Var.
In passing, rename and redocument make_partialgroup_input_target to have
some connection to what it actually does.
After pg_upgrade, it is possible that some tuples' Xmax have multixacts
corresponding to the old installation; such multixacts cannot have
running members anymore. In many code sites we already know not to read
them and clobber them silently, but at least when VACUUM tries to freeze
a multixact or determine whether one needs freezing, there's an attempt
to resolve it to its member transactions by calling GetMultiXactIdMembers,
and if the multixact value is "in the future" with regards to the
current valid multixact range, an error like this is raised:
ERROR: MultiXactId 123 has not been created yet -- apparent wraparound
and vacuuming fails. Per discussion with Andrew Gierth, it is completely
bogus to try to resolve multixacts coming from before a pg_upgrade,
regardless of where they stand with regards to the current valid
multixact range.
It's possible to get from under this problem by doing SELECT FOR UPDATE
of the problem tuples, but if tables are large, this is slow and
tedious, so a more thorough solution is desirable.
To fix, we realize that multixacts in xmax created in 9.2 and previous
have a specific bit pattern that is never used in 9.3 and later (we
already knew this, per comments and infomask tests sprinkled in various
places, but we weren't leveraging this knowledge appropriately).
Whenever the infomask of the tuple matches that bit pattern, we just
ignore the multixact completely as if Xmax wasn't set; or, in the case
of tuple freezing, we act as if an unwanted value is set and clobber it
without decoding. This guarantees that no errors will be raised, and
that the values will be progressively removed until all tables are
clean. Most callers of GetMultiXactIdMembers are patched to recognize
directly that the value is a removable "empty" multixact and avoid
calling GetMultiXactIdMembers altogether.
To avoid changing the signature of GetMultiXactIdMembers() in back
branches, we keep the "allow_old" boolean flag but rename it to
"from_pgupgrade"; if the flag is true, we always return an empty set
instead of looking up the multixact. (I suppose we could remove the
argument in the master branch, but I chose not to do so in this commit).
This was broken all along, but the error-facing message appeared first
because of commit 8e9a16ab8f and was partially fixed in a25c2b7c4d.
This fix, backpatched all the way back to 9.3, goes approximately in the
same direction as a25c2b7c4d but should cover all cases.
Bug analysis by Andrew Gierth and Álvaro Herrera.
A number of public reports match this bug:
https://www.postgresql.org/message-id/20140330040029.GY4582@tamriel.snowman.nethttps://www.postgresql.org/message-id/538F3D70.6080902@publicrelay.comhttps://www.postgresql.org/message-id/556439CF.7070109@pscs.co.ukhttps://www.postgresql.org/message-id/SG2PR06MB0760098A111C88E31BD4D96FB3540@SG2PR06MB0760.apcprd06.prod.outlook.comhttps://www.postgresql.org/message-id/20160615203829.5798.4594@wrigleys.postgresql.org
When the index is predicted to need more than NBuffers buckets,
CREATE INDEX attempts to sort the index entries by hash key before
insertion, so as to reduce thrashing. This code path got broken by
commit 9f03ca9151, which overlooked that _hash_form_tuple() is not
just an alias for index_form_tuple(). The index got built anyway, but
with garbage data, so that searches for pre-existing tuples always
failed. Fix by refactoring to separate construction of the indexable
data from calling index_form_tuple().
Per bug #14210 from Daniel Newman. Back-patch to 9.5 where the
bug was introduced.
Report: <20160623162507.17237.39471@wrigleys.postgresql.org>
The original specification for this called for the deserialization function
to have signature "deserialize(serialtype) returns transtype", which is a
security violation if transtype is INTERNAL (which it always would be in
practice) and serialtype is not (which ditto). The patch blithely overrode
the opr_sanity check for that, which was sloppy-enough work in itself,
but the indisputable reason this cannot be allowed to stand is that CREATE
FUNCTION will reject such a signature and thus it'd be impossible for
extensions to create parallelizable aggregates.
The minimum fix to make the signature type-safe is to add a second, dummy
argument of type INTERNAL. But to lock it down a bit more and make misuse
of INTERNAL-accepting functions less likely, let's get rid of the ability
to specify a "serialtype" for an aggregate and just say that the only
useful serialtype is BYTEA --- which, in practice, is the only interesting
value anyway, due to the usefulness of the send/recv infrastructure for
this purpose. That means we only have to allow "serialize(internal)
returns bytea" and "deserialize(bytea, internal) returns internal" as
the signatures for these support functions.
In passing fix bogus signature of int4_avg_combine, which I found thanks
to adding an opr_sanity check on combinefunc signatures.
catversion bump due to removing pg_aggregate.aggserialtype and adjusting
signatures of assorted built-in functions.
David Rowley and Tom Lane
Discussion: <27247.1466185504@sss.pgh.pa.us>
The original upper-planner-pathification design (commit 3fc6e2d7f5)
assumed that we could always determine during Path formation whether or not
we would need a Result plan node to perform projection of a targetlist.
That turns out not to work very well, though, because createplan.c still
has some responsibilities for choosing the specific target list associated
with sorting/grouping nodes (in particular it might choose to add resjunk
columns for sorting). We might not ever refactor that --- doing so would
push more work into Path formation, which isn't attractive --- and we
certainly won't do so for 9.6. So, while create_projection_path and
apply_projection_to_path can tell for sure what will happen if the subpath
is projection-capable, they can't tell for sure when it isn't. This is at
least a latent bug in apply_projection_to_path, which might think it can
apply a target to a non-projecting node when the node will end up computing
something different.
Also, I'd tied the creation of a ProjectionPath node to whether or not a
Result is needed, but it turns out that we sometimes need a ProjectionPath
node anyway to avoid modifying a possibly-shared subpath node. Callers had
to use create_projection_path for such cases, and we added code to them
that knew about the potential omission of a Result node and attempted to
adjust the cost estimates for that. That was uncertainly correct and
definitely ugly/unmaintainable.
To fix, have create_projection_path explicitly check whether a Result
is needed and adjust its cost estimate accordingly, though it creates
a ProjectionPath in either case. apply_projection_to_path is now mostly
just an optimized version that can avoid creating an extra Path node when
the input is known to not be shared with any other live path. (There
is one case that create_projection_path doesn't handle, which is pushing
parallel-safe expressions below a Gather node. We could make it do that
by duplicating the GatherPath, but there seems no need as yet.)
create_projection_plan still has to recheck the tlist-match condition,
which means that if the matching situation does get changed by createplan.c
then we'll have made a slightly incorrect cost estimate. But there seems
no help for that in the near term, and I doubt it occurs often enough,
let alone would change planning decisions often enough, to be worth
stressing about.
I added a "dummypp" field to ProjectionPath to track whether
create_projection_path thinks a Result is needed. This is not really
necessary as-committed because create_projection_plan doesn't look at the
flag; but it seems like a good idea to remember what we thought when
forming the cost estimate, if only for debugging purposes.
In passing, get rid of the target_parallel parameter added to
apply_projection_to_path by commit 54f5c5150. I don't think that's a good
idea because it involves callers in what should be an internal decision,
and opens us up to missing optimization opportunities if callers think they
don't need to provide a valid flag, as most don't. For the moment, this
just costs us an extra has_parallel_hazard call when planning a Gather.
If that starts to look expensive, I think a better solution would be to
teach PathTarget to carry/cache knowledge of parallel-safety of its
contents.
This patch provides a new implementation of the logic added by commit
137805f89 and later removed by 77ba61080. It differs from the original
primarily in expending much less effort per joinrel in large queries,
which it accomplishes by doing most of the matching work once per query not
once per joinrel. Hopefully, it's also less buggy and better commented.
The never-documented enable_fkey_estimates GUC remains gone.
There remains work to be done to make the selectivity estimates account
for nulls in FK referencing columns; but that was true of the original
patch as well. We may be able to address this point later in beta.
In the meantime, any error should be in the direction of overestimating
rather than underestimating joinrel sizes, which seems like the direction
we want to err in.
Tomas Vondra and Tom Lane
Discussion: <31041.1465069446@sss.pgh.pa.us>
When doing partial aggregation, the args list of the upper (combining)
Aggref node is replaced by a Var representing the output of the partial
aggregation steps, which has either the aggregate's transition data type
or a serialized representation of that. However, nodeAgg.c blindly
continued to use the args list as an indication of the user-level argument
types. This broke resolution of polymorphic transition datatypes at
executor startup (though it accidentally failed to fail for the ANYARRAY
case, which is likely the only one anyone had tested). Moreover, the
constructed FuncExpr passed to the finalfunc contained completely wrong
information, which would have led to bogus answers or crashes for any case
where the finalfunc examined that information (which is only likely to be
with polymorphic aggregates using a non-polymorphic transition type).
As an independent bug, apply_partialaggref_adjustment neglected to resolve
a polymorphic transition datatype before assigning it as the output type
of the lower-level Aggref node. This again accidentally failed to fail
for ANYARRAY but would be unlikely to work in other cases.
To fix the first problem, record the user-level argument types in a
separate OID-list field of Aggref, and look to that rather than the args
list when asking what the argument types were. (It turns out to be
convenient to include any "direct" arguments in this list too, although
those are not currently subject to being overwritten.)
Rather than adding yet another resolve_aggregate_transtype() call to fix
the second problem, add an aggtranstype field to Aggref, and store the
resolved transition type OID there when the planner first computes it.
(By doing this in the planner and not the parser, we can allow the
aggregate's transition type to change from time to time, although no DDL
support yet exists for that.) This saves nothing of consequence for
simple non-polymorphic aggregates, but for polymorphic transition types
we save a catalog lookup during executor startup as well as several
planner lookups that are new in 9.6 due to parallel query planning.
In passing, fix an error that was introduced into count_agg_clauses_walker
some time ago: it was applying exprTypmod() to something that wasn't an
expression node at all, but a TargetEntry. exprTypmod silently returned
-1 so that there was not an obvious failure, but this broke the intended
sensitivity of aggregate space consumption estimates to the typmod of
varchar and similar data types. This part needs to be back-patched.
Catversion bump due to change of stored Aggref nodes.
Discussion: <8229.1466109074@sss.pgh.pa.us>
This requires some core changes as well so that we can properly
WAL-log the truncation. Specifically, it changes the format of the
XLOG_SMGR_TRUNCATE WAL record, so bump XLOG_PAGE_MAGIC.
Patch by me, reviewed but not fully endorsed by Andres Freund.
Commit 04ae11f62e removed some broken
code to apply the scan/join target to partial paths, but its theory
that this processing step is totally unnecessary turns out to be wrong.
Put similar code back again, but this time, check for parallel-safety
and avoid in-place modifications to paths that may already have been
used as part of some other path.
(This is not an entirely elegant solution to this problem; it might
be better, for example, to postpone generate_gather_paths for the
topmost scan/join rel until after the scan/join target has been
applied. But this is not the time for such redesign work.)
Amit Kapila and Robert Haas
If you really want to vacuum every single page in the relation,
regardless of apparent visibility status or anything else, you can use
this option. In previous releases, this behavior could be achieved
using VACUUM (FREEZE), but because we can now recognize all-frozen
pages as not needing to be frozen again, that no longer works. There
should be no need for routine use of this option, but maybe bugs or
disaster recovery will necessitate its use.
Patch by me, reviewed by Andres Freund.
The main point of doing this is to allow the cutoff to be set very small,
even zero, to allow parallel-query behavior to be tested on relatively
small tables such as we typically use in the regression tests. But it
might be of use to users too. The number-of-workers scaling behavior in
create_plain_partial_paths() is pretty ad-hoc and subject to change, so
we won't expose anything about that, but the notion of not considering
parallel query at all for tables below size X seems reasonably stable.
Amit Kapila, per a suggestion from me
Discussion: <17170.1465830165@sss.pgh.pa.us>
Commit a892234f83 added a new bit per
page to the visibility map fork indicating whether the page is
all-frozen, but incorrectly assumed that if lazy_scan_heap chose to
freeze a tuple then that tuple would not need to later be frozen
again. This turns out to be false, because xmin and xmax (and
conceivably xvac, if dealing with tuples from very old releases) could
be frozen at separate times.
Thanks to Andres Freund for help in uncovering and tracking down this
issue.
currtid() and currtid2() call GetLatestSnapshot(), which fails in
parallel mode. pg_export_snapshot() calls ExportSnapshot() which
attempts to assign an XID for the current transaction if it does not
already have one; that, too, will fail in parallel mode.
Andreas Seltenreich
The struct definition for PathTarget specifies that a NULL sortgrouprefs
pointer means no sortgroupref labels. While it's likely that there
should always be at least one labeled column in the places that were
unconditionally fetching through the pointer, it seems wiser to adhere to
the data structure specification and test first. Add a macro to make this
convenient. Per experimentation with running the regression tests with a
very small parallelization threshold --- the crash I observed may well
represent a bug elsewhere, but still this coding was not very robust.
Report: <20756.1465834072@sss.pgh.pa.us>
While beneficial, both for throughput and average/worst case latency, in
a significant number of workloads, there are other workloads in which
backend_flush_after can cause significant performance regressions in
comparison to < 9.6 releases. The regression is most likely when the hot
data set is bigger than shared buffers, but significantly smaller than
the operating system's page cache.
I personally think that the benefit of enabling backend flush control is
considerably bigger than the potential downsides, but a fair argument
can be made that not regressing is more important than improving
performance/latency. As the latter is the consensus, change the default
to 0.
The other settings introduced in 428b1d6b2 do not have the same
potential for regressions, so leave them enabled.
Benchmarks leading up to changing the default have been performed by
Mithun Cy, Ashutosh Sharma and Robert Haas.
Discussion: CAD__OuhPmc6XH=wYRm_+Q657yQE88DakN4=Ybh2oveFasHkoeA@mail.gmail.com
Commit b12fd41c6 added a "reltarget_has_non_vars" field to RelOptInfo,
but failed to maintain it accurately. Since its only purpose was to skip
calls to has_parallel_hazard() in the simple case where a rel's targetlist
is all Vars, and that call is really pretty cheap in that case anyway, it
seems like this is just a case of premature optimization. Let's drop the
flag and do the calls unconditionally until it's proven that we need more
smarts here.
As noted by Andres Freund, we'd accumulated quite a few similar functions
in clauses.c that examine all functions in an expression tree to see if
they satisfy some boolean test. Reduce the duplication by inventing a
function check_functions_in_node() that applies a simple callback function
to each SQL function OID appearing in a given expression node. This also
fixes some arguable oversights; for example, contain_mutable_functions()
did not check aggregate or window functions for mutability. I doubt that
that represents a live bug at the moment, because we don't really consider
mutability for aggregates; but it might someday be one.
I chose to put check_functions_in_node() in nodeFuncs.c because it seemed
like other modules might wish to use it in future. That in turn forced
moving set_opfuncid() et al into nodeFuncs.c, as the alternative was for
nodeFuncs.c to depend on optimizer/setrefs.c which didn't seem very clean.
In passing, teach contain_leaked_vars_walker() about a few more expression
node types it can safely look through, and improve the rather messy and
undercommented code in has_parallel_hazard_walker().
Discussion: <20160527185853.ziol2os2zskahl7v@alap3.anarazel.de>
Since indexes are created without valid LSNs, an index created
while a snapshot older than old_snapshot_threshold existed could
cause queries to return incorrect results when those old snapshots
were used, if any relevant rows had been subject to early pruning
before the index was built. Prevent usage of a newly created index
until all such snapshots are released, for relations where this can
happen.
Questions about the interaction of "snapshot too old" with index
creation were initially raised by Andres Freund.
Reviewed by Robert Haas.
Transmit the leader's temp-namespace state to workers. This is important
because without it, the workers do not really have the same search path
as the leader. For example, there is no good reason (and no extant code
either) to prevent a worker from executing a temp function that the
leader created previously; but as things stood it would fail to find the
temp function, and then either fail or execute the wrong function entirely.
We still prohibit a worker from creating a temp namespace on its own.
In effect, a worker can only see the session's temp namespace if the leader
had created it before starting the worker, which seems like the right
semantics.
Also, transmit the leader's BackendId to workers, and arrange for workers
to use that when determining the physical file path of a temp relation
belonging to their session. While the original intent was to prevent such
accesses entirely, there were a number of holes in that, notably in places
like dbsize.c which assume they can safely access temp rels of other
sessions anyway. We might as well get this right, as a small down payment
on someday allowing workers to access the leader's temp tables. (With
this change, directly using "MyBackendId" as a relation or buffer backend
ID is deprecated; you should use BackendIdForTempRelations() instead.
I left a couple of such uses alone though, as they're not going to be
reachable in parallel workers until we do something about localbuf.c.)
Move the thou-shalt-not-access-thy-leader's-temp-tables prohibition down
into localbuf.c, which is where it actually matters, instead of having it
in relation_open(). This amounts to recognizing that access to temp
tables' catalog entries is perfectly safe in a worker, it's only the data
in local buffers that is problematic.
Having done all that, we can get rid of the test in has_parallel_hazard()
that says that use of a temp table's rowtype is unsafe in parallel workers.
That test was unduly expensive, and if we really did need such a
prohibition, that was not even close to being a bulletproof guard for it.
(For example, any user-defined function executed in a parallel worker
might have attempted such access.)
Such paths are unsafe. To make it cheaper to detect when this case
applies, track whether a relation's default PathTarget contains any
non-Vars. In most cases, the answer will be no, which enables us to
determine cheaply that the target list for a proposed path is
parallel-safe. However, subquery pull-up can create cases that
require us to inspect the target list more carefully.
Amit Kapila, reviewed by me.
Document these as "nearest integer >= argument" and "nearest integer <=
argument", which will hopefully be less confusing than the old formulation.
New wording is from Matlab via Dean Rasheed.
I changed the pg_description entries as well as the SGML docs. In the
back branches, this will only affect installations initdb'd in the future,
but it should be harmless otherwise.
Discussion: <CAEZATCW3yzJo-NMSiQs5jXNFbTsCEftZS-Og8=FvFdiU+kYuSA@mail.gmail.com>
Fix a couple of overlooked uses of "degree" terminology. Make the parallel
worker count selection logic in create_plain_partial_paths more robust (in
particular, it failed with max_parallel_workers_per_gather set to zero).
This terminology provoked widespread complaints. So, instead, rename
the GUC max_parallel_degree to max_parallel_workers_per_gather
(leaving room for a possible future GUC max_parallel_workers that acts
as a system-wide limit), and rename the parallel_degree reloption to
parallel_workers. Rename structure members to match.
These changes create a dump/restore hazard for users of PostgreSQL
9.6beta1 who have set the reloption (or applied the GUC using ALTER
USER or ALTER DATABASE).
This commit reverts 137805f89 as well as the associated commits 015e88942,
5306df283, and 68d704edb. We found multiple bugs in this feature, and
there was concern about possible planner slowdown (though to be fair,
exhibiting a very large slowdown proved difficult). The way forward
requires a considerable rewrite, which may or may not be possible to
accomplish in time for beta2. In my judgment reviewing the rewrite will
be easier to accomplish starting from a clean slate, so let's temporarily
revert what's there now. This also leaves us in a safe state if it turns
out to be necessary to postpone the rewrite to the next development cycle.
Discussion: <20160429102531.GA13701@huehner.biz>
If we ANALYZE only selected columns of a table, we should not postpone
auto-analyze because of that; other columns may well still need stats
updates. As committed, the counter is left alone if a column list is
given, whether or not it includes all analyzable columns of the table.
Per complaint from Tomasz Ostrowski.
It's been like this a long time, so back-patch to all supported branches.
Report: <ef99c1bd-ff60-5f32-2733-c7b504eb960c@ato.waw.pl>
If a Gather node has read as many tuples as it needs (for example, due
to Limit) it may detach the queue connecting it to the worker before
reading all of the worker's tuples. Rather than let the worker
continue to generate and send all of the results, have it stop after
sending the next tuple.
More could be done here to stop the worker even quicker, but this is
about as well as we can hope to do for 9.6.
This is in response to a problem report from Andreas Seltenreich.
Commit 44339b892a should be actually be
sufficient to fix that example even without this change, but it seems
better to do this, too, since we might otherwise waste quite a large
amount of effort in one or more workers.
Discussion: CAA4eK1KOKGqmz9bGu+Z42qhRwMbm4R5rfnqsLCNqFs9j14jzEA@mail.gmail.com
Amit Kapila
This attempts to buy back some of whatever performance we lost from fixing
bug #14174 by inlining the initial checks in MakeExpandedObjectReadOnly()
into the callers. We can do that in a macro without creating multiple-
evaluation hazards, so it's pretty much free notationally; and the amount
of code added to callers should be minimal as well. (Testing a value can't
take many more instructions than passing it to a subroutine.)
Might as well inline DatumIsReadWriteExpandedObject() while we're at it.
This is an ABI break for callers, so it doesn't seem safe to put into 9.5,
but I see no reason not to do it in HEAD.
If a plan node output expression returns an "expanded" datum, and that
output column is referenced in more than one place in upper-level plan
nodes, we need to ensure that what is returned is a read-only reference
not a read/write reference. Otherwise one of the referencing sites could
scribble on or even delete the expanded datum before we have evaluated the
others. Commit 1dc5ebc907, which introduced this feature, supposed
that it'd be sufficient to make SubqueryScan nodes force their output
columns to read-only state. The folly of that was revealed by bug #14174
from Andrew Gierth, and really should have been immediately obvious
considering that the planner will happily optimize SubqueryScan nodes
out of the plan without any regard for this issue.
The safest fix seems to be to make ExecProject() force its results into
read-only state; that will cover every case where a plan node returns
expression results. Actually we can delegate this to ExecTargetList()
since we can recursively assume that plain Vars will not reference
read-write datums. That should keep the extra overhead down to something
minimal. We no longer need ExecMakeSlotContentsReadOnly(), which was
introduced only in support of the idea that just a few plan node types
would need to do this.
In the future it would be nice to have the planner account for this problem
and inject force-to-read-only expression evaluation nodes into only the
places where there's a risk of multiple evaluation. That's not a suitable
solution for 9.5 or even 9.6 at this point, though.
Report: <20160603124628.9932.41279@wrigleys.postgresql.org>
Mostly these are just comments but there are a few in documentation
and a handful in code and tests. Hopefully this doesn't cause too much
unnecessary pain for backpatching. I relented from some of the most
common like "thru" for that reason. The rest don't seem numerous
enough to cause problems.
Thanks to Kevin Lyda's tool https://pypi.python.org/pypi/misspellings
Per post-commit review comments from Andres Freund, improve variable
names, comments, and in one place, slightly improve the code structure.
Masahiko Sawada
The original intent in the stats collector was that we should not write out
stats data oftener than every PGSTAT_STAT_INTERVAL msec. Backends will not
make requests at all if they see the existing data is newer than that, and
the stats collector is supposed to disregard requests having a cutoff_time
older than its most recently written data, so that close-together requests
don't result in multiple writes. But the latter part of that got broken
in commit 187492b6c2, so that if two backends concurrently decide
the existing stats are too old, the collector would write the data twice.
(In principle the collector's logic would still merge requests as long as
the second one arrives before we've actually written data ... but since
the message collection loop would write data immediately after processing
a single inquiry message, that never happened in practice, and in any case
the window in which it might work would be much shorter than
PGSTAT_STAT_INTERVAL.)
To fix, improve pgstat_recv_inquiry so that it checks whether the cutoff
time is too old, and doesn't add a request to the queue if so. This means
that we do not need DBWriteRequest.request_time, because the decision is
taken before making a queue entry. And that means that we don't really
need the DBWriteRequest data structure at all; an OID list of database
OIDs will serve and allow removal of some rather verbose and crufty code.
In passing, improve the comments in this area, which have been rather
neglected. Also change backend_read_statsfile so that it's not silently
relying on MyDatabaseId to have some particular value in the autovacuum
launcher process. It accidentally worked as desired because MyDatabaseId
is zero in that process; but that does not seem like a dependency we want,
especially with no documentation about it.
Although this patch is mine, it turns out I'd rediscovered a known bug,
for which Tomas Vondra had already submitted a patch that's functionally
equivalent to the non-cosmetic aspects of this patch. Thanks to Tomas
for reviewing this version.
Back-patch to 9.3 where the bug was introduced.
Prior-Discussion: <1718942738eb65c8407fcd864883f4c8@fuzzy.cz>
Patch: <4625.1464202586@sss.pgh.pa.us>
This bug appears to have been introduced late in the development of
48354581a4 ("Allow Pin/UnpinBuffer to operate in a lockfree
manner.").
Found while debugging a bug which turned out to be independent of the
commit mentioned above.
Backpatch: -
BRIN was relying on the ability to remove a tuple from an index page,
then putting another tuple in the same line pointer. But PageAddItem
refuses to add a tuple beyond the first free item past the last used
item, and in particular, it rejects an attempt to add an item to an
empty page anywhere other than the first line pointer. PageAddItem
issues a WARNING and indicates to the caller that it failed, which in
turn causes the BRIN calling code to issue a PANIC, so the whole
sequence looks like this:
WARNING: specified item offset is too large
PANIC: failed to add BRIN tuple
To fix, create a new function PageAddItemExtended which is like
PageAddItem except that the two boolean arguments become a flags bitmap;
the "overwrite" and "is_heap" boolean flags in PageAddItem become
PAI_OVERWITE and PAI_IS_HEAP flags in the new function, and a new flag
PAI_ALLOW_FAR_OFFSET enables the behavior required by BRIN.
PageAddItem() retains its original signature, for compatibility with
third-party modules (other callers in core code are not modified,
either).
Also, in the belt-and-suspenders spirit, I added a new sanity check in
brinGetTupleForHeapBlock to raise an error if an TID found in the revmap
is not marked as live by the page header. This causes it to react with
"ERROR: corrupted BRIN index" to the bug at hand, rather than a hard
crash.
Backpatch to 9.5.
Bug reported by Andreas Seltenreich as detected by his handy sqlsmith
fuzzer.
Discussion: https://www.postgresql.org/message-id/87mvni77jh.fsf@elite.ansel.ydns.eu
If both timeout indicators are set when we arrive at ProcessInterrupts,
we've historically just reported "lock timeout". However, some buildfarm
members have been observed to fail isolationtester's timeouts test by
reporting "lock timeout" when the statement timeout was expected to fire
first. The cause seems to be that the process is allowed to sleep longer
than expected (probably due to heavy machine load) so that the lock
timeout happens before we reach the point of reporting the error, and
then this arbitrary tiebreak rule does the wrong thing. We can improve
matters by comparing the scheduled timeout times to decide which error
to report.
I had originally proposed greatly reducing the 1-second window between
the two timeouts in the test cases. On reflection that is a bad idea,
at least for the case where the lock timeout is expected to fire first,
because that would assume that it takes negligible time to get from
statement start to the beginning of the lock wait. Thus, this patch
doesn't completely remove the risk of test failures on slow machines.
Empirically, however, the case this handles is the one we are seeing
in the buildfarm. The explanation may be that the other case requires
the scheduler to take the CPU away from a busy process, whereas the
case fixed here only requires the scheduler to not give the CPU back
right away to a process that has been woken from a multi-second sleep
(and, perhaps, has been swapped out meanwhile).
Back-patch to 9.3 where the isolationtester timeouts test was added.
Discussion: <8693.1464314819@sss.pgh.pa.us>
If RAW_EXPRESSION_COVERAGE_TEST is defined, do a no-op tree walk over
every basic DML statement submitted to parse analysis. If we'd had this
in place earlier, bug #14153 would have been caught by buildfarm testing.
The difficulty is that raw_expression_tree_walker() is only used in
limited cases involving CTEs (particularly recursive ones), so it's
very easy for an oversight in it to not be noticed during testing of a
seemingly-unrelated feature.
The type of error we can expect to catch with this is complete omission
of a node type from raw_expression_tree_walker(), and perhaps also
recursion into a field that doesn't contain a node tree, though that
would be an unlikely mistake. It won't catch failure to add new fields
that need to be recursed into, unfortunately.
I'll go enable this on one or two of my own buildfarm animals once
bug #14153 is dealt with.
Discussion: <27861.1464040417@sss.pgh.pa.us>
do_text_output_multiline() would fail (typically with a null pointer
dereference crash) if its input string did not end with a newline. Such
cases do not arise in our current sources; but it certainly could happen
in future, or in extension code's usage of the function, so we should fix
it. To fix, replace "eol += len" with "eol = text + len".
While at it, make two cosmetic improvements: mark the input string const,
and rename the argument from "text" to "txt" to dodge pgindent strangeness
(since "text" is a typedef name).
Even though this problem is only latent at present, it seems like a good
idea to back-patch the fix, since it's a very simple/safe patch and it's
not out of the realm of possibility that we might in future back-patch
something that expects sane behavior from do_text_output_multiline().
Per report from Hao Lee.
Report: <CAGoxFiFPAGyPAJLcFxTB5cGhTW2yOVBDYeqDugYwV4dEd1L_Ag@mail.gmail.com>
This was overlooked in commit 473b93287, which introduced DROP ACCESS
METHOD. Although that command is restricted to superusers, we don't want
even superusers dropping the built-in methods; "DROP ACCESS METHOD btree"
in particular is unrecoverable from. Pin these objects in the same way
that other initdb-created objects are pinned.
I chose to bump catversion for this fix. That's not absolutely necessary
perhaps, but it will ensure that no 9.6 production systems are missing
the pin entries.
This patch essentially reverts commit 4c6780fd17, in favor of a much
simpler solution for the case where the new cluster would choose to create
a TOAST table but the old cluster doesn't have one: just don't create a
TOAST table.
The existing code failed in at least two different ways if the situation
arose: (1) ALTER TABLE RESET didn't grab an exclusive lock, so that the
lock sanity check in create_toast_table failed; (2) pg_upgrade did not
provide a pg_type OID for the new toast table, so that the crosscheck in
TypeCreate failed. While both these problems were introduced by later
patches, they show that the hack being used to cause TOAST table creation
is overwhelmingly fragile (and untested). I also note that before the
TypeCreate crosscheck was added, the code would have resulted in assigning
an indeterminate pg_type OID to the toast table, possibly causing a later
OID conflict in that catalog; so that it didn't really work even when
committed.
If we simply don't create a TOAST table, there will only be a problem if
the code tries to store a tuple that's wider than a page, and field
compression isn't sufficient to get it under a page. Given that the TOAST
creation threshold is intended to be about a quarter of a page, it's very
hard to believe that cross-version differences in the do-we-need-a-toast-
table heuristic could result in an observable problem. So let's just
follow the old version's conclusion about whether a TOAST table is needed.
(If we ever do change needs_toast_table() so much that this conclusion
doesn't apply, we can devise a solution at that time, and hopefully do
it in a less klugy way than 4c6780fd17 did.)
Back-patch to 9.3, like the previous patch.
Discussion: <8110.1462291671@sss.pgh.pa.us>
Hash indexes are not WAL-logged, and so do not maintain the LSN of
index pages. Since the "snapshot too old" feature counts on
detecting error conditions using the LSN of a table and all indexes
on it, this makes it impossible to safely do early vacuuming on any
table with a hash index, so add this to the tests for whether the
xid used to vacuum a table can be adjusted based on
old_snapshot_threshold.
While at it, add a paragraph to the docs for old_snapshot_threshold
which specifically mentions this and other aspects of the feature
which may otherwise surprise users.
Problem reported and patch reviewed by Amit Kapila
Move fmtReloptionsArray() from pg_dump.c to string_utils.c so that it
is available to other frontend code. In particular psql's \ev and \sv
commands need it to handle view reloptions. Also rename the function
to appendReloptionsArray(), which is a more accurate description of
what it does.
Author: Dean Rasheed
Reviewed-by: Peter Eisentraut
Discussion: http://www.postgresql.org/message-id/CAEZATCWZjCgKRyM-agE0p8ax15j9uyQoF=qew7D2xB6cF76T8A@mail.gmail.com
The similarity of the original names to SQL keywords seems like a bad
idea. Rename them before we're stuck with 'em forever.
In passing, minor code and docs cleanup.
Discussion: <4875.1462210058@sss.pgh.pa.us>
This reverts commits f07d18b6e9, 82c83b3372, 3a3b309041, and
24c5f1a103.
This feature has shown enough immaturity that it was deemed better to
rip it out before rushing some more fixes at the last minute. There are
discussions on larger changes in this area for the next release.
Conversion functions were previously marked as parallel-unsafe, since
that is the default, but in fact they are safe. Parallel-safe
functions defined in pg_proc.h and redefined in system_views.sql were
ending up as parallel-unsafe because the redeclarations were not
marked PARALLEL SAFE. While editing system_views.sql, mark ts_debug()
parallel safe also.
Andreas Karlsson
Back in 3b02ea4f07 I added some comments in various places to explain
how logical decoding and other things worked. Not all of the changes
were welcome, because they were misleading or wrong. This changes them
a little bit to make them more accurate.
Some other comments are also changed to be more accurate. Also, fix a
bunch of typos.
Author: Álvaro Herrera, Craig Ringer
Andres Freund reviewed some parts of this.
Commit 7117685461 made pg_start_backup
parallel-restricted rather than parallel-safe, because it now relies
on backend-private state that won't be synchronized with the parallel
worker. However, it didn't update pg_proc.h. Separately, Andreas
Karlsson observed that system_views.sql neglected to reiterate the
parallel-safety markings whe redefining various functions, including
this one; so add a PARALLEL RESTRICTED declaration there to match
the new value in pg_proc.h.
Given a three-or-more-way equivalence class, such as X.Y = Y.Y = Z.Z,
it was possible for the planner to omit one of the quals needed to
enforce that all members of the equivalence class are actually equal.
This only happened in the case of a parameterized join node for two
of the relations, that is a plan tree like
Nested Loop
-> Scan X
-> Nested Loop
-> Scan Y
-> Scan Z
Filter: Z.Z = X.X
The eclass machinery normally expects to apply X.X = Y.Y when those
two relations are joined, but in this shape of plan tree they aren't
joined until the top node --- and, if the lower nested loop is marked
as parameterized by X, the top node will assume that the relevant eclass
condition(s) got pushed down into the lower node. On the other hand,
the scan of Z assumes that it's only responsible for constraining Z.Z
to match any one of the other eclass members. So one or another of
the required quals sometimes fell between the cracks, depending on
whether consideration of the eclass in get_joinrel_parampathinfo()
for the lower nested loop chanced to generate X.X = Y.Y or X.X = Z.Z
as the appropriate constraint there. If it generated the latter,
it'd erroneously suppose that the Z scan would take care of matters.
To fix, force X.X = Y.Y to be generated and applied at that join node
when this case occurs.
This is *extremely* hard to hit in practice, because various planner
behaviors conspire to mask the problem; starting with the fact that the
planner doesn't really like to generate a parameterized plan of the
above shape. (It might have been impossible to hit it before we
tweaked things to allow this plan shape for star-schema cases.) Many
thanks to Alexander Kirkouski for submitting a reproducible test case.
The bug can be demonstrated in all branches back to 9.2 where parameterized
paths were introduced, so back-patch that far.
Without a few entries beyond old_snapshot_threshold, the lookup
would often fail, resulting in the more aggressive pruning or
vacuum being skipped often enough to matter. This was very clearly
shown by a python test script posted by Ants Aasma, and was likely
a factor in an earlier but somewhat less clear-cut test case posted
by Jeff Janes.
This patch makes no change to the logic, per se -- it just makes
the array of mapping entries big enough to make lookup misses based
on timing much less likely. An occasional miss is still possible
if a thread stalls for more than 10 minutes, but that does not
create any problem with correctness of behavior. Besides, if
things are so busy that a thread is stalling for more than 10
minutes, it is probably OK to skip the more aggressive cleanup at
that particular point in time.
Adjust the way we detect the locale. As a result the minumum Windows
version supported by VS2015 and later is Windows Vista. Add some tweaks
to remove new compiler warnings. Remove documentation references to the
now obsolete msysGit.
Michael Paquier, somewhat edited by me, reviewed by Christian Ullrich.
Backpatch to 9.5
Commit 23a41573c attempted to fix the DatumGetBool macro to ignore bits
in a Datum that are to the left of the actual bool value. But it did that
by casting the Datum to bool; and on compilers that use C99 semantics for
bool, that ends up being a whole-word test, not a 1-byte test. This seems
to be the true explanation for contrib/seg failing in VS2015. To fix, use
GET_1_BYTE() explicitly. I think in the previous patch, I'd had some idea
of not having to commit to bool being exactly 1 byte wide, but regardless
of what the compiler's bool is, boolean columns and Datums are certainly
1 byte wide.
The previous fix was (eventually) back-patched into all active versions,
so do likewise with this one.
Previously, ginInsertCleanup could exit early if it detects that someone else
is cleaning up the pending list, without waiting for that someone else to
finish the job. But in this case vacuum could miss tuples to be deleted.
Cleanup process now locks metapage with a help of heavyweight
LockPage(ExclusiveLock), and it guarantees that there is no another cleanup
process at the same time. Lock is taken differently depending on caller of
cleanup process: any vacuums and gin_clean_pending_list() will be blocked
until lock becomes available, ordinary insert uses conditional lock to
prevent indefinite waiting on lock.
Insert into pending list doesn't use this lock, so insertion isn't blocked.
Also, patch adds stopping of cleanup process when at-start-cleanup-tail is
reached in order to prevent infinite cleanup in case of massive insertion. But
it will stop only for automatic maintenance tasks like autovacuum.
Patch introduces choice of limit of memory to use: autovacuum_work_mem,
maintenance_work_mem or work_mem depending on call path.
Patch for previous releases should be reworked due to changes between 9.6 and
previous ones in this area.
Discover and diagnostics by Jeff Janes and Tomas Vondra
Patch by me with some ideas of Jeff Janes
Commit 989be0810d added a flex/bison lexer/parser to interpret
synchronous_standby_names. It was done in a pretty crufty way, though,
making assorted end-use sites responsible for calling the parser at the
right times. That was not only vulnerable to errors of omission, but made
it possible that lexer/parser errors occur at very undesirable times,
and created memory leakages even if there was no error.
Instead, perform the parsing once during check_synchronous_standby_names
and let guc.c manage the resulting data. To do that, we have to flatten
the parsed representation into a single hunk of malloc'd memory, but that
is not very hard.
While at it, work a little harder on making useful error reports for
parsing problems; the previous code felt that "synchronous_standby_names
parser returned 1" was an appropriate user-facing error message. (To
be fair, it did also log a syntax error message, but separately from the
GUC problem report, which is at best confusing.) It had some outright
bugs in the face of invalid input, too.
I (tgl) also concluded that we need to restrict unquoted names in
synchronous_standby_names to be just SQL identifiers. The previous coding
would accept darn near anything, which (1) makes the quoting convention
both nearly-unnecessary and formally ambiguous, (2) makes it very hard to
understand what is a syntax error and what is a creative interpretation of
the input as a standby name, and (3) makes it impossible to further extend
the syntax in future without a compatibility break. I presume that we're
intending future extensions of the syntax, else this parsing infrastructure
is massive overkill, so (3) is an important objection. Since we've taken
a compatibility hit for non-identifier names with this change anyway, we
might as well lock things down now and insist that users use double quotes
for standby names that aren't identifiers.
Kyotaro Horiguchi and Tom Lane
The way that PartialAggregate and FinalizeAggregate plan nodes were
displaying output columns before was bogus. Now, FinalizeAggregate
produces the same outputs as an Aggregate would have produced, while
PartialAggregate produces each of those outputs prefixed by the word
PARTIAL.
Discussion: 12585.1460737650@sss.pgh.pa.us
Patch by me, reviewed by David Rowley.
So far, when a transaction with pending invalidations, but without an
assigned xid, committed, we simply ignored those invalidation
messages. That's problematic, because those are actually sent for a
reason.
Known symptoms of this include that existing sessions on a hot-standby
replica sometimes fail to notice new concurrently built indexes and
visibility map updates.
The solution is to WAL log such invalidations in transactions without an
xid. We considered to alternatively force-assign an xid, but that'd be
problematic for vacuum, which might be run in systems with few xids.
Important: This adds a new WAL record, but as the patch has to be
back-patched, we can't bump the WAL page magic. This means that standbys
have to be updated before primaries; otherwise
"PANIC: standby_redo: unknown op code 32" errors can be encountered.
XXX:
Reported-By: Васильев Дмитрий, Masahiko Sawada
Discussion:
CAB-SwXY6oH=9twBkXJtgR4UC1NqT-vpYAtxCseME62ADwyK5OA@mail.gmail.comCAD21AoDpZ6Xjg=gFrGPnSn4oTRRcwK1EBrWCq9OqOHuAcMMC=w@mail.gmail.com
pg_atomic_compare_exchange_*_impl() were providing only the semantics of
an acquire barrier. Buildfarm members hornet and mandrill revealed this
deficit beginning with commit 008608b9d5.
While we have no report of symptoms in 9.5, we can't rule out the
possibility of certain compilers, hardware, or extension code relying on
these functions' specified barrier semantics. Back-patch to 9.5, where
commit b64d92f1a5 introduced atomics.
Reviewed by Andres Freund.
The coverage was rather lean for cases that bind() or listen() might
return. Add entries for everything that there's a direct equivalent
for in the set of Unix errnos that elog.c has heard of.
There's no longer a need for the MSVC-version-specific code stanza that
forcibly redefines errno code symbols, because since commit 73838b52 we're
unconditionally redefining them in the stanza before this one anyway.
Now it's merely confusing and ugly, so get rid of it; and improve the
comment that explains what's going on here.
Although this is just cosmetic, back-patch anyway since I'm intending
to back-patch some less-cosmetic changes in this same hunk of code.
Revert commit 7cb1db1d95, which represented
a misunderstanding of the problem (if snapmgr.h weren't already included
in bufmgr.h, things wouldn't compile anywhere). Instead install what
I think is the real fix.
Even with old_snapshot_threshold = -1 (which disables the "snapshot
too old" feature), performance regressions were seen at moderate to
high concurrency. For example, a one-socket, four-core system
running 200 connections at saturation could see up to a 2.3%
regression, with larger regressions possible on NUMA machines.
By inlining the early (smaller, faster) tests in the
TestForOldSnapshot() function, the i7 case dropped to a 0.2%
regression, which could easily just be noise, and is clearly an
improvement. Further testing will show whether more is needed.
Commit 36a35c550a turned the interface between ginPlaceToPage and
its subroutines in gindatapage.c and ginentrypage.c into a royal mess:
page-update critical sections were started in one place and finished in
another place not even in the same file, and the very same subroutine
might return having started a critical section or not. Subsequent patches
band-aided over some of the problems with this design by making things
even messier.
One user-visible resulting problem is memory leaks caused by the need for
the subroutines to allocate storage that would survive until ginPlaceToPage
calls XLogInsert (as reported by Julien Rouhaud). This would not typically
be noticeable during retail index updates. It could be visible in a GIN
index build, in the form of memory consumption swelling to several times
the commanded maintenance_work_mem.
Another rather nasty problem is that in the internal-page-splitting code
path, we would clear the child page's GIN_INCOMPLETE_SPLIT flag well before
entering the critical section that it's supposed to be cleared in; a
failure in between would leave the index in a corrupt state. There were
also assorted coding-rule violations with little immediate consequence but
possible long-term hazards, such as beginning an XLogInsert sequence before
entering a critical section, or calling elog(DEBUG) inside a critical
section.
To fix, redefine the API between ginPlaceToPage() and its subroutines
by splitting the subroutines into two parts. The "beginPlaceToPage"
subroutine does what can be done outside a critical section, including
full computation of the result pages into temporary storage when we're
going to split the target page. The "execPlaceToPage" subroutine is called
within a critical section established by ginPlaceToPage(), and it handles
the actual page update in the non-split code path. The critical section,
as well as the XLOG insertion call sequence, are both now always started
and finished in ginPlaceToPage(). Also, make ginPlaceToPage() create and
work in a short-lived memory context to eliminate the leakage problem.
(Since a short-lived memory context had been getting created in the most
common code path in the subroutines, this shouldn't cause any noticeable
performance penalty; we're just moving the overhead up one call level.)
In passing, fix a bunch of comments that had gone unmaintained throughout
all this klugery.
Report: <571276DD.5050303@dalibo.com>
The reverted changes were intended to force a choice of whether any
newly-added BufferGetPage() calls needed to be accompanied by a
test of the snapshot age, to support the "snapshot too old"
feature. Such an accompanying test is needed in about 7% of the
cases, where the page is being used as part of a scan rather than
positioning for other purposes (such as DML or vacuuming). The
additional effort required for back-patching, and the doubt whether
the intended benefit would really be there, have indicated it is
best just to rely on developers to do the right thing based on
comments and existing usage, as we do with many other conventions.
This change should have little or no effect on generated executable
code.
Motivated by the back-patching pain of Tom Lane and Robert Haas
Per discussion, there doesn't seem to be much value in having
NUM_SPINLOCK_SEMAPHORES set to 1024: under any scenario where you are
running more than a few backends concurrently, you really had better have a
real spinlock implementation if you want tolerable performance. And 1024
semaphores is a sizable fraction of the system-wide SysV semaphore limit
on many platforms. Therefore, reduce this setting's default value to 128
to make it less likely to cause out-of-semaphores problems.
The previous display was sort of confusing, because it didn't
distinguish between the number of workers that we planned to launch
and the number that actually got launched. This has already confused
several people, so display both numbers and label them clearly.
Julien Rouhaud, reviewed by me.
pg_xlogdump includes bufmgr.h. With a compiler that emits code for
static inline functions even when they're unreferenced, that leads
to unresolved external references in the new static-inline version
of BufferGetPage(). So hide it with #ifndef FRONTEND, as we've done
for similar issues elsewhere. Per buildfarm member pademelon.
My previous attempt at doing so, in 80abbeba23, was not sufficient. While that
fixed the problem for bufmgr.c and lwlock.c , s_lock.c still has non-constant
expressions in the struct initializer, because the file/line/function
information comes from the caller of s_lock().
Give up on using a macro, and use a static inline instead.
Discussion: 4369.1460435533@sss.pgh.pa.us
Commit 314cbfc5da redefined the signature of this hook as
typedef int (*walrcv_receive_type) (char **buffer, int *wait_fd);
But in fact the type of the "wait_fd" variable ought to be pgsocket,
which is what WaitLatchOrSocket expects, and which is necessary if
we want to be able to assign PGINVALID_SOCKET to it on Windows.
So fix that.
Logical messages, added in 3fe3511d05, during decoding failed to filter
messages emitted in other databases and messages emitted "under" a
replication origin the output plugin isn't interested in.
Add tests to verify that both types of filtering actually work. While
touching message.sql remove hunk obsoleted by d25379e.
Bump XLOG_PAGE_MAGIC because xl_logical_message changed and because
3fe3511d05 had omitted doing so. 3fe3511d05 additionally didn't bump
catversion, but 7a542700d has done so since.
Author: Petr Jelinek
Reported-By: Andres Freund
Discussion: 20160406142513.wotqy3ba3kanr423@alap3.anarazel.de
The current definition of init_spin_delay (introduced recently in
48354581a) wasn't C89 compliant. It's not legal to refer to refer to
non-constant expressions, and the ptr argument was one. This, as
reported by Tom, lead to a failure on buildfarm animal pademelon.
The pointer, especially on system systems with ASLR, isn't super helpful
anyway, though. So instead of making init_spin_delay into an inline
function, make s_lock_stuck() report the function name in addition to
file:line and change init_spin_delay() accordingly. While not a direct
replacement, the function name is likely more useful anyway (line
numbers are often hard to interpret in third party reports).
This also fixes what file/line number is reported for waits via
s_lock().
As PG_FUNCNAME_MACRO is now used outside of elog.h, move it to c.h.
Reported-By: Tom Lane
Discussion: 4369.1460435533@sss.pgh.pa.us
The recent patch to make Pin/UnpinBuffer lockfree in the hot
path (48354581a), accidentally used pg_atomic_fetch_or_u32() in
MarkLocalBufferDirty(). Other code operating on local buffers was
careful to only use pg_atomic_read/write_u32 which just read/write from
memory; to avoid unnecessary overhead.
On its own that'd just make MarkLocalBufferDirty() slightly less
efficient, but in addition InitLocalBuffers() doesn't call
pg_atomic_init_u32() - thus the spinlock fallback for the atomic
operations isn't initialized. That in turn caused, as reported by Tom,
buildfarm animal gaur to fail. As those errors are actually useful
against this type of error, continue to omit - intentionally this time -
initialization of the atomic variable.
In addition, add an explicit note about only using pg_atomic_read/write
on local buffers's state to BufferDesc's description.
Reported-By: Tom Lane
Discussion: 1881.1460431476@sss.pgh.pa.us
It's silly to define these counts as narrower than they might someday
need to be. Also, I believe that the BLCKSZ * nflush calculation in
mdwriteback was capable of overflowing an int.
I've seen one too many "could not bind IPv4 socket: No error" log entries
from the Windows buildfarm members. Per previous discussion, this is
likely caused by the fact that we're doing nothing to translate
WSAGetLastError() to errno. Put in a wrapper layer to do that.
If this works as expected, it should get back-patched, but let's see what
happens in the buildfarm first.
Discussion: <4065.1452450340@sss.pgh.pa.us>
The original patch kind of ignored the fact that we were doing something
different from a costing point of view, but nobody noticed. This patch
fixes that oversight.
David Rowley
Per discussion, this gives potential users of the hook more flexibility,
because they can build custom Paths that implement only one stage of
upper processing atop core-provided Paths for earlier stages.
Rename this function to GenericXLogRegisterBuffer() to make it clearer
what it does, and leave room for other sorts of "register" actions in
future. Also, replace its "bool isNew" argument with an integer flags
argument, so as to allow adding more flags in future without an API
break.
Alexander Korotkov, adjusted slightly by me
I was initially concerned that the some of the hundreds of
references to BufferGetPage() where the literal
BGP_NO_SNAPSHOT_TEST were passed might not optimize as well as a
macro, leading to some hard-to-find performance regressions in
corner cases. Inspection of disassembled code has shown identical
code at all inspected locations, and the size difference doesn't
amount to even one byte per such call. So make it readable.
Per gripes from Álvaro Herrera and Tom Lane
Previously we used a spinlock, in adition to the atomically manipulated
->state field, to protect the wait queue. But it's pretty simple to
instead perform the locking using a flag in state.
Due to 6150a1b0 BufferDescs, on platforms (like PPC) with > 1 byte
spinlocks, increased their size above 64byte. As 64 bytes are the size
we pad allocated BufferDescs to, this can increase false sharing;
causing performance problems in turn. Together with the previous commit
this reduces the size to <= 64 bytes on all common platforms.
Author: Andres Freund
Discussion: CAA4eK1+ZeB8PMwwktf+3bRS0Pt4Ux6Rs6Aom0uip8c6shJWmyg@mail.gmail.com20160327121858.zrmrjegmji2ymnvr@alap3.anarazel.de
Pinning/Unpinning a buffer is a very frequent operation; especially in
read-mostly cache resident workloads. Benchmarking shows that in various
scenarios the spinlock protecting a buffer header's state becomes a
significant bottleneck. The problem can be reproduced with pgbench -S on
larger machines, but can be considerably worse for queries which touch
the same buffers over and over at a high frequency (e.g. nested loops
over a small inner table).
To allow atomic operations to be used, cram BufferDesc's flags,
usage_count, buf_hdr_lock, refcount into a single 32bit atomic variable;
that allows to manipulate them together using 32bit compare-and-swap
operations. This requires reducing MAX_BACKENDS to 2^18-1 (which could
be lifted by using a 64bit field, but it's not a realistic configuration
atm).
As not all operations can easily implemented in a lockfree manner,
implement the previous buf_hdr_lock via a flag bit in the atomic
variable. That way we can continue to lock the header in places where
it's needed, but can get away without acquiring it in the more frequent
hot-paths. There's some additional operations which can be done without
the lock, but aren't in this patch; but the most important places are
covered.
As bufmgr.c now essentially re-implements spinlocks, abstract the delay
logic from s_lock.c into something more generic. It now has already two
users, and more are coming up; there's a follupw patch for lwlock.c at
least.
This patch is based on a proof-of-concept written by me, which Alexander
Korotkov made into a fully working patch; the committed version is again
revised by me. Benchmarking and testing has, amongst others, been
provided by Dilip Kumar, Alexander Korotkov, Robert Haas.
On a large x86 system improvements for readonly pgbench, with a high
client count, of a factor of 8 have been observed.
Author: Alexander Korotkov and Andres Freund
Discussion: 2400449.GjM57CE0Yg@dinodell
This routine is unsafe as implemented, because it invalidates the page
image pointers returned by previous GenericXLogRegister() calls.
Rather than complicate the API or the implementation to avoid that,
let's just get rid of it; the use-case for having it seems much
too thin to justify a lot of work here.
While at it, do some wordsmithing on the SGML docs for generic WAL.
\crosstabview is a completely different way to display results from a
query: instead of a vertical display of rows, the data values are placed
in a grid where the column and row headers come from the data itself,
similar to a spreadsheet.
The sort order of the horizontal header can be specified by using
another column in the query, and the vertical header determines its
ordering from the order in which they appear in the query.
This only allows displaying a single value in each cell. If more than
one value correspond to the same cell, an error is thrown. Merging of
values can be done in the query itself, if necessary. This may be
revisited in the future.
Author: Daniel Verité
Reviewed-by: Pavel Stehule, Dean Rasheed
Previously bcac23d exposed a subset of support functions, namely the
ones Kaigai found useful. In
20160304193704.elq773pyg5fyl3mi@alap3.anarazel.de I mentioned that
there's some functions missing to use the facility in an external
project.
To avoid having to add functions piecemeal, add all the functions which
are used to define READ_* and WRITE_* macros; users of the extensible
node functionality are likely to need these. Additionally expose
outDatum(), which doesn't have it's own WRITE_ macro, as it needs
information from the embedding struct.
Discussion: 20160304193704.elq773pyg5fyl3mi@alap3.anarazel.de
This creates an initial set of default roles which administrators may
use to grant access to, historically, superuser-only functions. Using
these roles instead of granting superuser access reduces the number of
superuser roles required for a system. Documention for each of the
default roles has been added to user-manag.sgml.
Bump catversion to 201604082, as we had a commit that bumped it to
201604081 and another that set it back to 201604071...
Reviews by José Luis Tallón and Robert Haas
This will prevent users from creating roles which begin with "pg_" and
will check for those roles before allowing an upgrade using pg_upgrade.
This will allow for default roles to be provided at initdb time.
Reviews by José Luis Tallón and Robert Haas
This feature is controlled by a new old_snapshot_threshold GUC. A
value of -1 disables the feature, and that is the default. The
value of 0 is just intended for testing. Above that it is the
number of minutes a snapshot can reach before pruning and vacuum
are allowed to remove dead tuples which the snapshot would
otherwise protect. The xmin associated with a transaction ID does
still protect dead tuples. A connection which is using an "old"
snapshot does not get an error unless it accesses a page modified
recently enough that it might not be able to produce accurate
results.
This is similar to the Oracle feature, and we use the same SQLSTATE
and error message for compatibility.
This patch is a no-op patch which is intended to reduce the chances
of failures of omission once the functional part of the "snapshot
too old" patch goes in. It adds parameters for snapshot, relation,
and an enum to specify whether the snapshot age check needs to be
done for the page at this point. This initial patch passes NULL
for the first two new parameters and BGP_NO_SNAPSHOT_TEST for the
third. The follow-on patch will change the places where the test
needs to be made.
These parameters are available for SSPI authentication only, to make
it possible to make it behave more like "normal gssapi", while
making it possible to maintain compatibility.
compat_realm is on by default, but can be turned off to make the
authentication use the full Kerberos realm instead of the NetBIOS name.
upn_username is off by default, and can be turned on to return the users
Kerberos UPN rather than the SAM-compatible name (a user in Active
Directory can have both a legacy SAM-compatible username and a new
Kerberos one. Normally they are the same, but not always)
Author: Christian Ullrich
Reviewed by: Robbie Harwood, Alvaro Herrera, me
Create a "bsd" auth method that works the same as "password" so far as
clients are concerned, but calls the BSD Authentication service to
check the password. This is currently only available on OpenBSD.
Marisa Emerson, reviewed by Thomas Munro
This allows parallel aggregation to use them. It may seem surprising
that we use float8_combine for both float4_accum and float8_accum
transition functions, but that's because those functions differ only
in the type of the non-transition-state argument.
Haribabu Kommi, reviewed by David Rowley and Tomas Vondra
As noticed by Tom Lane changing operation's number in commit
bb140506df causes on-disk format incompatibility.
Revert to previous numbering, that is reason to add special array to store
priorities of operation. Also it reverts order of tsquery to previous.
Author: Dmitry Ivanov
Now indexes (but only B-tree for now) can contain "extra" column(s) which
doesn't participate in index structure, they are just stored in leaf
tuples. It allows to use index only scan by using single index instead
of two or more indexes.
Author: Anastasia Lubennikova with minor editorializing by me
Reviewers: David Rowley, Peter Geoghegan, Jeff Janes
The code that estimates what parallel degree should be uesd for the
scan of a relation is currently rather stupid, so add a parallel_degree
reloption that can be used to override the planner's rather limited
judgement.
Julien Rouhaud, reviewed by David Rowley, James Sewell, Amit Kapila,
and me. Some further hacking by me.
The PAM_RHOST item is set to the remote IP address or host name and can
be used by PAM modules. A pg_hba.conf option is provided to choose
between IP address and resolved host name.
From: Grzegorz Sampolski <grzsmp@gmail.com>
Reviewed-by: Haribabu Kommi <kommi.haribabu@gmail.com>
We still use replacement selection for the first run of the sort only
and only when the number of tuples is relatively small. Otherwise,
the first run, and subsequent runs in all cases, are produced using
quicksort. This tends to be faster except perhaps for very small
amounts of working memory.
Peter Geoghegan, reviewed by Tomas Vondra, Jeff Janes, Mithun Cy,
Greg Stark, and me.
Contention on the relation extension lock can become quite fierce when
multiple processes are inserting data into the same relation at the same
time at a high rate. Experimentation shows the extending the relation
multiple blocks at a time improves scalability.
Dilip Kumar, reviewed by Petr Jelinek, Amit Kapila, and me.
In cases where joins use multiple columns we currently assess each join
separately causing gross mis-estimates for join cardinality.
This patch adds use of FK information for the first time into the
planner. When FKs are present and we have multi-column join information,
plan estimates will be drastically improved. Cases with multiple FKs
are handled, though partial matches are ignored currently.
Net effect is substantial performance improvements for joins in many
common cases. Additional planning time is isolated to cases that are
currently performing poorly, measured at 0.08 - 0.15 ms.
Please watch for planner performance regressions; circumstances seem
unlikely but the law of unintended consequences may apply somewhen.
Additional complex tests welcome to prove this before release.
Tests can be performed using SET enable_fkey_estimates = on | off
using scripts provided during Hackers discussions, message id:
552335D9.3090707@2ndquadrant.com
Authors: Tomas Vondra and David Rowley
Reviewed and tested by Simon Riggs, adding comments only
Patch introduces new text search operator (<-> or <DISTANCE>) into tsquery.
On-disk and binary in/out format of tsquery are backward compatible.
It has two side effect:
- change order for tsquery, so, users, who has a btree index over tsquery,
should reindex it
- less number of parenthesis in tsquery output, and tsquery becomes more
readable
Authors: Teodor Sigaev, Oleg Bartunov, Dmitry Ivanov
Reviewers: Alexander Korotkov, Artur Zakirov
Now that all of the infrastructure exists, add in the ability to
dump out the ACLs of the objects inside of pg_catalog or the ACLs
for objects which are members of extensions, but only if they have
been changed from their original values.
The original values are tracked in pg_init_privs. When pg_dump'ing
9.6-and-above databases, we will dump out the ACLs for all objects
in pg_catalog and the ACLs for all extension members, where the ACL
has been changed from the original value which was set during either
initdb or CREATE EXTENSION.
This should not change dumps against pre-9.6 databases.
Reviews by Alexander Korotkov, Jose Luis Tallon
This new catalog holds the privileges which the system was
initialized with at initdb time, along with any permissions set
by extensions at CREATE EXTENSION time. This allows pg_dump
(and any other similar use-cases) to detect when the privileges
set on initdb-created or extension-created objects have been
changed from what they were set to at initdb/extension-creation
time and handle those changes appropriately.
Reviews by Alexander Korotkov, Jose Luis Tallon
It inserts a new value into an jsonb array at arbitrary position or
a new key to jsonb object.
Author: Dmitry Dolgov
Reviewers: Petr Jelinek, Vitaly Burovoy, Andrew Dunstan
API and mechanism to allow generic messages to be inserted into WAL that are
intended to be read by logical decoding plugins. This commit adds an optional
new callback to the logical decoding API.
Messages are either text or bytea. Messages can be transactional, or not, and
are identified by a prefix to allow multiple concurrent decoding plugins.
(Not to be confused with Generic WAL records, which are intended to allow crash
recovery of extensible objects.)
Author: Petr Jelinek and Andres Freund
Reviewers: Artur Zakirov, Tomas Vondra, Simon Riggs
Discussion: 5685F999.6010202@2ndquadrant.com
Previously synchronous replication offered only the ability to confirm
that all changes made by a transaction had been transferred to at most
one synchronous standby server.
This commit extends synchronous replication so that it supports multiple
synchronous standby servers. It enables users to consider one or more
standby servers as synchronous, and increase the level of transaction
durability by ensuring that transaction commits wait for replies from
all of those synchronous standbys.
Multiple synchronous standby servers are configured in
synchronous_standby_names which is extended to support new syntax of
'num_sync ( standby_name [ , ... ] )', where num_sync specifies
the number of synchronous standbys that transaction commits need to
wait for replies from and standby_name is the name of a standby
server.
The syntax of 'standby_name [ , ... ]' which was used in 9.5 or before
is also still supported. It's the same as new syntax with num_sync=1.
This commit doesn't include "quorum commit" feature which was discussed
in pgsql-hackers. Synchronous standbys are chosen based on their priorities.
synchronous_standby_names determines the priority of each standby for
being chosen as a synchronous standby. The standbys whose names appear
earlier in the list are given higher priority and will be considered as
synchronous. Other standby servers appearing later in this list
represent potential synchronous standbys.
The regression test for multiple synchronous standbys is not included
in this commit. It should come later.
Authors: Sawada Masahiko, Beena Emerson, Michael Paquier, Fujii Masao
Reviewed-By: Kyotaro Horiguchi, Amit Kapila, Robert Haas, Simon Riggs,
Amit Langote, Thomas Munro, Sameer Thakur, Suraj Kharage, Abhijit Menon-Sen,
Rajeev Rastogi
Many thanks to the various individuals who were involved in
discussing and developing this feature.
This introduces a new dependency type which marks an object as depending
on an extension, such that if the extension is dropped, the object
automatically goes away; and also, if the database is dumped, the object
is included in the dump output. Currently the grammar supports this for
indexes, triggers, materialized views and functions only, although the
utility code is generic so adding support for more object types is a
matter of touching the parser rules only.
Author: Abhijit Menon-Sen
Reviewed-by: Alexander Korotkov, Álvaro Herrera
Discussion: http://www.postgresql.org/message-id/20160115062649.GA5068@toroid.org
has_parallel_hazard() was ignoring the proparallel markings for
aggregates, which is no good. Fix that. There was no way to mark
an aggregate as actually being parallel-safe, either, so add a
PARALLEL option to CREATE AGGREGATE.
Patch by me, reviewed by David Rowley.
This lets us use parallel aggregate for a variety of useful cases
that didn't work before, like sum(int8), sum(numeric), several
versions of avg(), and various other functions.
Add some regression tests, as well, testing the general sanity of
these and future catalog entries.
David Rowley, reviewed by Tomas Vondra, with a few further changes
by me.
Previously non-exclusive backups had to be done using the replication protocol
and pg_basebackup. With this commit it's now possible to make them using
pg_start_backup/pg_stop_backup as well, as long as the backup program can
maintain a persistent connection to the database.
Doing this, backup_label and tablespace_map are returned as results from
pg_stop_backup() instead of being written to the data directory. This makes
the server safe from a crash during an ongoing backup, which can be a problem
with exclusive backups.
The old syntax of the functions remain and work exactly as before, but since the
new syntax is safer this should eventually be deprecated and removed.
Only reference documentation is included. The main section on backup still needs
to be rewritten to cover this, but since that is already scheduled for a separate
large rewrite, it's not included in this patch.
Reviewed by David Steele and Amit Kapila
This elevel is useful for logging audit messages and similar information
that should not be passed to the client. It's equivalent to LOG in terms
of decisions about logging priority in the postmaster log, but messages
with this elevel will never be sent to the client.
In the current implementation, it's just an alias for the longstanding
COMMERROR elevel (or more accurately, we've made COMMERROR an alias for
this). At some point it might be interesting to allow a LOG_ONLY flag to
be attached to any elevel, but that would be considerably more complicated,
and it's not clear there's enough use-cases to justify the extra work.
For now, let's just take the easy 90% solution.
David Steele, reviewed by Fabien Coelho, Petr Jelínek, and myself
This interface is designed to give an access to WAL for extensions which
could implement new access method, for example. Previously it was
impossible because restoring from custom WAL would need to access system
catalog to find a redo custom function. This patch suggests generic way
to describe changes on page with standart layout.
Bump XLOG_PAGE_MAGIC because of new record type.
Author: Alexander Korotkov with a help of Petr Jelinek, Markus Nullmeier and
minor editorization by my
Reviewers: Petr Jelinek, Alvaro Herrera, Teodor Sigaev, Jim Nasby,
Michael Paquier
Previously, the planner would reject an index-only scan if any restriction
clause for its table used a column not available from the index, even
if that restriction clause would later be dropped from the plan entirely
because it's implied by the index's predicate. This is a fairly common
situation for partial indexes because predicates using columns not included
in the index are often the most useful kind of predicate, and we have to
duplicate (or at least imply) the predicate in the WHERE clause in order
to get the index to be considered at all. So index-only scans were
essentially unavailable with such partial indexes.
To fix, we have to do detection of implied-by-predicate clauses much
earlier in the planner. This patch puts it in check_index_predicates
(nee check_partial_indexes), meaning it gets done for every partial index,
whereas we previously only considered this issue at createplan time,
so that the work was only done for an index actually selected for use.
That could result in a noticeable planning slowdown for queries against
tables with many partial indexes. However, testing suggested that there
isn't really a significant cost, especially not with reasonable numbers
of partial indexes. We do get a small additional benefit, which is that
cost_index is more accurate since it correctly discounts the evaluation
cost of clauses that will be removed. We can also avoid considering such
clauses as potential indexquals, which saves useless matching cycles in
the case where the predicate columns aren't in the index, and prevents
generating bogus plans that double-count the clause's selectivity when
the columns are in the index.
Tomas Vondra and Kyotaro Horiguchi, reviewed by Kevin Grittner and
Konstantin Knizhnik, and whacked around a little by me
When decoding from a logical slot, it's necessary for xlog reading to be
able to read xlog from historical (i.e. not current) timelines;
otherwise, decoding fails after failover, because the archives are in
the historical timeline. This is required to make "failover logical
slots" possible; it currently has no other use, although theoretically
it could be used by an extension that creates a slot on a standby and
continues to replay from the slot when the standby is promoted.
This commit includes a module in src/test/modules with functions to
manipulate the slots (which is not otherwise possible in SQL code) in
order to enable testing, and a new test in src/test/recovery to ensure
that the behavior is as expected.
Author: Craig Ringer
Reviewed-By: Oleksii Kliukin, Andres Freund, Petr Jelínek
Some minor tweaks and comment additions, for cleanliness sake and to
avoid having the upcoming timeline-following patch be polluted with
unrelated cleanup.
Extracted from a larger patch by Craig Ringer, reviewed by Andres
Freund, with some additions by myself.
Formerly, the geometric I/O routines such as box_in and point_out relied
directly on strtod() and sprintf() for conversion of the float8 component
values of their data types. However, the behavior of those functions is
pretty platform-dependent, especially for edge-case values such as
infinities and NaNs. This was exposed by commit acdf2a8b37, which
added test cases involving boxes with infinity endpoints, and immediately
failed on Windows and AIX buildfarm members. We solved these problems
years ago in the main float8in and float8out functions, so let's fix it
by making the geometric types use that code instead of depending directly
on the platform-supplied functions.
To do this, refactor the float8in code so that it can be used to parse
just part of a string, and as a convenience make the guts of float8out
usable without going through DirectFunctionCall.
While at it, get rid of geo_ops.c's fairly shaky assumptions about the
maximum output string length for a double, by having it build results in
StringInfo buffers instead of fixed-length strings.
In passing, convert all the "invalid input syntax for type foo" messages
in this area of the code into "invalid input syntax for type %s" to reduce
the number of distinct translatable strings, per recent discussion.
We would have needed a fair number of the latter anyway for code-sharing
reasons, so we might as well just go whole hog.
Note: this patch is by no means intended to guarantee that the geometric
types uniformly behave sanely for infinity or NaN component values.
But any bugs we have in that line were there all along, they were just
harder to reach in a platform-independent way.
Patch implements quad-tree over boxes, naive approach of 2D quad tree will not
work for any non-point objects because splitting space on node is not
efficient. The idea of pathc is treating 2D boxes as 4D points, so,
object will not overlap (in 4D space).
The performance tests reveal that this technique especially beneficial
with too much overlapping objects, so called "spaghetti data".
Author: Alexander Lebedev with editorization by Emre Hasegeli and me
During scan sometimes it would be very helpful to know some information about
parent node or all ancestor nodes. Right now reconstructedValue could be used
but it's not a right usage of it (range opclass uses that).
traversalValue is arbitrary piece of memory in separate MemoryContext while
reconstructedVale should have the same type as indexed column.
Subsequent patches for range opclass and quad4d tree will use it.
Author: Alexander Lebedev, Teodor Sigaev
In this mode, the master waits for the transaction to be applied on
the remote side, not just written to disk. That means that you can
count on a transaction started on the standby to see all commits
previously acknowledged by the master.
To make this work, the standby sends a reply after replaying each
commit record generated with synchronous_commit >= 'remote_apply'.
This introduces a small inefficiency: the extra replies will be sent
even by standbys that aren't the current synchronous standby. But
previously-existing synchronous_commit levels make no attempt at all
to optimize which replies are sent based on what the primary cares
about, so this is no worse, and at least avoids any extra replies for
people not using the feature at all.
Thomas Munro, reviewed by Michael Paquier and by me. Some additional
tweaks by me.
With the original SQL-function implementation, such cases failed because
we don't support infinite intervals. Converting the function to C lets
us bypass the interval representation, which should be a bit faster as
well as more flexible.
Vitaly Burovoy, reviewed by Anastasia Lubennikova
This is necessary infrastructure for supporting parallel aggregation
for aggregates whose transition type is "internal". Such values
can't be passed between cooperating processes, because they are
just pointers.
David Rowley, reviewed by Tomas Vondra and by me.
Per discussion, the new extensible node framework is thought to be
better designed than the custom path/scan/scanstate stuff we added
in PostgreSQL 9.5. Rework the latter to be more like the former.
This is not backward-compatible, but we generally don't promise that
for C APIs, and there probably aren't many people using this yet
anyway.
KaiGai Kohei, reviewed by Petr Jelinek and me. Some further
cosmetic changes by me.
Commit fbe5a3fb73 accidentally changed
this behavior; put things back the way they were, and add some
regression tests.
Report by Andres Freund; patch by Ashutosh Bapat, with a bit of
kibitzing by me.
Up until now, we've been using timezone and tzname, but Visual Studio
2015 (for which we wish to add support) no longer declares those
symbols. All versions since Visual Studio 2003 apparently support the
underscore-equipped names, and we don't support anything older than
Visual Studio 2005, so this should work OK everywhere. But let's see
what the buildfarm thinks.
Michael Paquier, reviewed by Petr Jelinek
Returning the direct result of bit arithmetic, in a macro intended to be
used in a boolean manner, can be problematic if the return value is
stored in a variable of type 'bool'. If bool is implemented using C99's
_Bool, that can lead to comparison failures if the variable is then
compared again with the expression (see ginStepRight() for an example
that fails), as _Bool forces the result to be 0/1. That happens in some
configurations of newer MSVC compilers. It's also problematic when
storing the result of such an expression in a narrower type.
Several gin macros have been declared in that style since gin's initial
commit in 8a3631f8d8.
There's a lot more macros like this, but this is the only one causing
regression test failures; and I don't want to commit and backpatch a
larger patch with lots of conflicts just before the next set of minor
releases.
Discussion: 20150811154237.GD17575@awork2.anarazel.de
Backpatch: All supported branches
This avoids leaving dangling links in pg_operator; which while fairly
harmless are also unsightly.
While we're at it, simplify OperatorUpd, which went through
heap_modify_tuple for no very good reason considering it had already made
a tuple copy it could just scribble on.
Roma Sokolov, reviewed by Tomas Vondra, additional hacking by Robert Haas
and myself.
This completes (at least for now) the project of getting rid of ad-hoc
linkages among the src/bin/ subdirectories. Everything they share is now
in src/fe_utils/ and is included from a static library at link time.
A side benefit is that we can restore the FLEX_NO_BACKUP check for
psqlscanslash.l. We might need to think of another way to do that check
if we ever need to build two lexers with that property in the same source
directory, but there's no foreseeable reason to need that.
Per discussion, we want to create a static library and put the stuff into
it that until now has been shared across src/bin/ directories by ad-hoc
methods like symlinking a source file. This commit creates the library and
populates it with a couple of files that contain the widely-useful portions
of pg_dump's dumputils.c file. dumputils.c survives, because it has some
stuff that didn't seem appropriate for fe_utils, but it's significantly
smaller and is no longer referenced from any other directory.
Follow-on patches will move more stuff into fe_utils.
The Mkvcbuild.pm hacking here is just a best guess; we'll see how the
buildfarm likes it.
This enables external code to create access methods. This is useful so
that extensions can add their own access methods which can be formally
tracked for dependencies, so that DROP operates correctly. Also, having
explicit support makes pg_dump work correctly.
Currently only index AMs are supported, but we expect different types to
be added in the future.
Authors: Alexander Korotkov, Petr Jelínek
Reviewed-By: Teodor Sigaev, Petr Jelínek, Jim Nasby
Commitfest-URL: https://commitfest.postgresql.org/9/353/
Discussion: https://www.postgresql.org/message-id/CAPpHfdsXwZmojm6Dx+TJnpYk27kT4o7Ri6X_4OSWcByu1Rm+VA@mail.gmail.com
Now that we have src/common/ for code shared between frontend and backend,
we can get rid of (most of) the klugy ways that the keyword table and
keyword lookup code were formerly shared between different uses.
This is a first step towards a more general plan of getting rid of
special-purpose kluges for sharing code in src/bin/.
I chose to merge kwlookup.c back into keywords.c, as it once was, and
always has been so far as keywords.h is concerned. We could have
kept them separate, but there is noplace that uses ScanKeywordLookup
without also wanting access to the backend's keyword list, so there
seems little point.
ecpg is still a bit weird, but at least now the trickiness is documented.
I think that the MSVC build script should require no adjustments beyond
what's done here ... but we'll soon find out.
Parallel workers can now partially aggregate the data and pass the
transition values back to the leader, which can combine the partial
results to produce the final answer.
David Rowley, based on earlier work by Haribabu Kommi. Reviewed by
Álvaro Herrera, Tomas Vondra, Amit Kapila, James Sewell, and me.
Commit ac1d794 ("Make idle backends exit if the postmaster dies.")
introduced a regression on, at least, large linux systems. Constantly
adding the same postmaster_alive_fds to the OSs internal datastructures
for implementing poll/select can cause significant contention; leading
to a performance regression of nearly 3x in one example.
This can be avoided by using e.g. linux' epoll, which avoids having to
add/remove file descriptors to the wait datastructures at a high rate.
Unfortunately the current latch interface makes it hard to allocate any
persistent per-backend resources.
Replace, with a backward compatibility layer, WaitLatchOrSocket with a
new WaitEventSet API. Users can allocate such a Set across multiple
calls, and add more than one file-descriptor to wait on. The latter has
been added because there's upcoming postgres features where that will be
helpful.
In addition to the previously existing poll(2), select(2),
WaitForMultipleObjects() implementations also provide an epoll_wait(2)
based implementation to address the aforementioned performance
problem. Epoll is only available on linux, but that is the most likely
OS for machines large enough (four sockets) to reproduce the problem.
To actually address the aforementioned regression, create and use a
long-lived WaitEventSet for FE/BE communication. There are additional
places that would benefit from a long-lived set, but that's a task for
another day.
Thanks to Amit Kapila, who helped make the windows code I blindly wrote
actually work.
Reported-By: Dmitry Vasilyev Discussion:
CAB-SwXZh44_2ybvS5Z67p_CDz=XFn4hNAD=CnMEF+QqkXwFrGg@mail.gmail.com20160114143931.GG10941@awork2.anarazel.de
Previously latches for windows and unix had been implemented in
different files. A later patch introduce an expanded wait
infrastructure, keeping the implementation separate would introduce too
much duplication.
This basically just moves the functions, without too much change. The
reason to keep this separate is that it allows blame to continue working
a little less badly; and to make review a tiny bit easier.
Discussion: 20160114143931.GG10941@awork2.anarazel.de
The distinction between "archive" and "hot_standby" existed only because
at the time "hot_standby" was added, there was some uncertainty about
stability. This is now a long time ago. We would like to move forward
with simplifying the replication configuration, but this distinction is
in the way, because a primary server cannot tell (without asking a
standby or predicting the future) which one of these would be the
appropriate level.
Pick a new name for the combined setting to make it clearer that it
covers all (non-logical) backup and replication uses. The old values
are still accepted but are converted internally.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Reviewed-by: David Steele <david@pgmasters.net>
postgres_fdw can now sent an UPDATE or DELETE statement directly to
the foreign server in simple cases, rather than sending a SELECT FOR
UPDATE statement and then updating or deleting rows one-by-one.
Etsuro Fujita, reviewed by Rushabh Lathia, Shigeru Hanada, Kyotaro
Horiguchi, Albe Laurenz, Thom Brown, and me.
- allow to use non-ascii characters as affix flag. Non-numeric affix flags now
are stored as string instead of numeric value of character.
- allow to use 0 as affix flag in numeric encoded affixes
That adds support for arabian, hungarian, turkish and
brazilian portuguese languages.
Author: Artur Zakirov with heavy editorization by me
Tighten the semantics of boundary-case timestamptz so that we allow
timestamps >= '4714-11-24 00:00+00 BC' and < 'ENDYEAR-01-01 00:00+00 AD'
exactly, no more and no less, but it is allowed to enter timestamps
within that range using non-GMT timezone offsets (which could make the
nominal date 4714-11-23 BC or ENDYEAR-01-01 AD). This eliminates
dump/reload failure conditions for timestamps near the endpoints.
To do this, separate checking of the inputs for date2j() from the
final range check, and allow the Julian date code to handle a range
slightly wider than the nominal range of the datatypes.
Also add a bunch of checks to detect out-of-range dates and timestamps
that formerly could be returned by operations such as date-plus-integer.
All C-level functions that return date, timestamp, or timestamptz should
now be proof against returning a value that doesn't pass IS_VALID_DATE()
or IS_VALID_TIMESTAMP().
Vitaly Burovoy, reviewed by Anastasia Lubennikova, and substantially
whacked around by me
There's a lot more that could be done here yet - in particular, this
reports only very coarse-grained information about the index vacuuming
phase - but even as it stands, the new pg_stat_progress_vacuum can
tell you quite a bit about what a long-running vacuum is actually
doing.
Amit Langote and Robert Haas, based on earlier work by Vinayak Pokale
and Rahila Syed.
Previously, we included <xlocale.h> only if necessary to get the definition
of type locale_t. According to notes in PGAC_TYPE_LOCALE_T, this is
important because on some versions of glibc that file supplies an
incompatible declaration of locale_t. (This info may be obsolete, because
on my RHEL6 box that seems to be the *only* definition of locale_t; but
there may still be glibc's in the wild for which it's a live concern.)
It turns out though that on FreeBSD and maybe other BSDen, you can get
locale_t from stdlib.h or locale.h but mbstowcs_l() and friends only from
<xlocale.h>. This was leaving us compiling calls to mbstowcs_l() and
friends with no visible prototype, which causes a warning and could
possibly cause actual trouble, since it's not declared to return int.
Hence, adjust the configure checks so that we'll include <xlocale.h>
either if it's necessary to get type locale_t or if it's necessary to
get a declaration of mbstowcs_l().
Report and patch by Aleksander Alekseev, somewhat whacked around by me.
Back-patch to all supported branches, since we have been using
mbstowcs_l() since 9.1.
This is basically like the just-added create_upper_paths_hook, but
control is funneled only to the FDW responsible for all the baserels
of the current query; so providing such a callback is much less likely
to add useless overhead than using the hook function is.
The documentation is a bit sketchy. We'll likely want to improve it,
and/or adjust the call conventions, when we get some experience with
actually using this callback. Hopefully somebody will find time to
experiment with it before 9.6 feature freeze.
In the initial revision of the upper-planner pathification work, the only
available way for an FDW or custom-scan provider to inject Paths
representing post-scan-join processing was to insert them during scan-level
GetForeignPaths or similar processing. While that's not impossible, it'd
require quite a lot of duplicative processing to look forward and see if
the extension would be capable of implementing the whole query. To improve
matters for custom-scan providers, provide a hook function at the point
where the core code is about to start filling in upperrel Paths. At this
point Paths are available for the whole scan/join tree, which should reduce
the amount of redundant effort considerably.
(An alternative design that was suggested was to provide a separate hook
for each post-scan-join processing step, but that seems messy and not
clearly more useful.)
Following our time-honored tradition, there's no documentation for this
hook outside the source code.
As-is, this hook is only meant for custom scan providers, which we can't
assume very much about. A followon patch will implement an FDW callback
to let FDWs do the same thing in a somewhat more structured fashion.
Although the default choice of rel->reltarget should typically be
sufficient for scan or join paths, it's not at all sufficient for the
purposes PathTargets were invented for; in particular not for
upper-relation Paths. So break API compatibility by adding a PathTarget
argument to create_foreignscan_path(). To ease updating of existing
code, accept a NULL value of the argument as selecting rel->reltarget.
In commit 19a541143a I did not make PathTarget a subtype of Node,
and embedded a RelOptInfo's reltarget directly into it rather than having
a separately-allocated Node. In hindsight that was misguided
micro-optimization, enabled by the fact that at that point we didn't have
any Paths with custom PathTargets. Now that PathTarget processing has
been fleshed out some more, it's easier to see that it's better to have
PathTarget as an indepedent Node type, even if it does cost us one more
palloc to create a RelOptInfo. So change it while we still can.
This commit just changes the representation, without doing anything more
interesting than that.
This patch widens SPI_processed, EState's es_processed field, PortalData's
portalPos field, FuncCallContext's call_cntr and max_calls fields,
ExecutorRun's count argument, PortalRunFetch's result, and the max number
of rows in a SPITupleTable to uint64, and deals with (I hope) all the
ensuing fallout. Some of these values were declared uint32 before, and
others "long".
I also removed PortalData's posOverflow field, since that logic seems
pretty useless given that portalPos is now always 64 bits.
The user-visible results are that command tags for SELECT etc will
correctly report tuple counts larger than 4G, as will plpgsql's GET
GET DIAGNOSTICS ... ROW_COUNT command. Queries processing more tuples
than that are still not exactly the norm, but they're becoming more
common.
Most values associated with FETCH/MOVE distances, such as PortalRun's count
argument and the count argument of most SPI functions that have one, remain
declared as "long". It's not clear whether it would be worth promoting
those to int64; but it would definitely be a large dollop of additional
API churn on top of this, and it would only help 32-bit platforms which
seem relatively less likely to see any benefit.
Andreas Scherbaum, reviewed by Christian Ullrich, additional hacking by me
CitusDB is using these and don't wish to redesign their code right now.
I am not on board with this being a good idea, or a good precedent,
but I lack the energy to fight about it.
Adds several tsvector editting function: convert tsvector to/from text array,
set weight for given lexemes, delete lexeme(s), unnest, filter lexemes
with given weights
Author: Stas Kelvich with some editorization by me
Reviewers: Tomas Vondram, Teodor Sigaev
Teach make_group_input_target() and make_window_input_target() to work
entirely with the PathTarget representation of tlists, rather than
constructing a tlist and immediately deconstructing it into PathTarget
format. In itself this only saves a few palloc's; the bigger picture is
that it opens the door for sharing cost_qual_eval work across all of
planner.c's constructions of PathTargets. I'll come back to that later.
In support of this, flesh out tlist.c's infrastructure for PathTargets
a bit more.
emit_log_hook could only see the translated text, making it harder to identify
which message was being sent. Pass original text to allow the exact message to
be identified, whichever language is used for logging.
Discussion: 20160216.184755.59721141.horiguchi.kyotaro@lab.ntt.co.jp
Author: Kyotaro Horiguchi
Up to now checkpoints were written in the order they're in the
BufferDescriptors. That's nearly random in a lot of cases, which
performs badly on rotating media, but even on SSDs it causes slowdowns.
To avoid that, sort checkpoints before writing them out. We currently
sort by tablespace, relfilenode, fork and block number.
One of the major reasons that previously wasn't done, was fear of
imbalance between tablespaces. To address that balance writes between
tablespaces.
The other prime concern was that the relatively large allocation to sort
the buffers in might fail, preventing checkpoints from happening. Thus
pre-allocate the required memory in shared memory, at server startup.
This particularly makes it more efficient to have checkpoint flushing
enabled, because that'll often result in a lot of writes that can be
coalesced into one flush.
Discussion: alpine.DEB.2.10.1506011320000.28433@sto
Author: Fabien Coelho and Andres Freund
Currently writes to the main data files of postgres all go through the
OS page cache. This means that some operating systems can end up
collecting a large number of dirty buffers in their respective page
caches. When these dirty buffers are flushed to storage rapidly, be it
because of fsync(), timeouts, or dirty ratios, latency for other reads
and writes can increase massively. This is the primary reason for
regular massive stalls observed in real world scenarios and artificial
benchmarks; on rotating disks stalls on the order of hundreds of seconds
have been observed.
On linux it is possible to control this by reducing the global dirty
limits significantly, reducing the above problem. But global
configuration is rather problematic because it'll affect other
applications; also PostgreSQL itself doesn't always generally want this
behavior, e.g. for temporary files it's undesirable.
Several operating systems allow some control over the kernel page
cache. Linux has sync_file_range(2), several posix systems have msync(2)
and posix_fadvise(2). sync_file_range(2) is preferable because it
requires no special setup, whereas msync() requires the to-be-flushed
range to be mmap'ed. For the purpose of flushing dirty data
posix_fadvise(2) is the worst alternative, as flushing dirty data is
just a side-effect of POSIX_FADV_DONTNEED, which also removes the pages
from the page cache. Thus the feature is enabled by default only on
linux, but can be enabled on all systems that have any of the above
APIs.
While desirable and likely possible this patch does not contain an
implementation for windows.
With the infrastructure added, writes made via checkpointer, bgwriter
and normal user backends can be flushed after a configurable number of
writes. Each of these sources of writes controlled by a separate GUC,
checkpointer_flush_after, bgwriter_flush_after and backend_flush_after
respectively; they're separate because the number of flushes that are
good are separate, and because the performance considerations of
controlled flushing for each of these are different.
A later patch will add checkpoint sorting - after that flushes from the
ckeckpoint will almost always be desirable. Bgwriter flushes are most of
the time going to be random, which are slow on lots of storage hardware.
Flushing in backends works well if the storage and bgwriter can keep up,
but if not it can have negative consequences. This patch is likely to
have negative performance consequences without checkpoint sorting, but
unfortunately so has sorting without flush control.
Discussion: alpine.DEB.2.10.1506011320000.28433@sto
Author: Fabien Coelho and Andres Freund
All along, this function should have treated WindowFuncs in a manner
similar to Aggrefs, ie with an option whether or not to recurse into them.
By not considering the case, it was always recursing, which is OK for most
callers (although I suspect that the case in prepare_sort_from_pathkeys
might represent a bug). But now we need return-without-recursing behavior
as well. There are also more than a few callers that should never see a
WindowFunc, and now we'll get some error checking on that.
In commit 1d97c19a0f and later c1d9579dd8, we extended
pull_var_clause's API by adding enum-type arguments. That's sort of a pain
to maintain, though, because it means every time we add a new behavior we
must touch every last one of the call sites, even if there's a reasonable
default behavior that most of them could use. Let's switch over to using a
bitmask of flags, instead; that seems more maintainable and might save a
nanosecond or two as well. This commit changes no behavior in itself,
though I'm going to follow it up with one that does add a new behavior.
In passing, remove flatten_tlist(), which has not been used since 9.1
and would otherwise need the same API changes.
Removing these enums means that optimizer/tlist.h no longer needs to
depend on optimizer/var.h. Changing that caused a number of C files to
need addition of #include "optimizer/var.h" (probably we can thank old
runs of pgrminclude for that); but on balance it seems like a good change
anyway.
Earlier version committed in 9.0 caused spurious waits in some cases.
New infrastructure for lock waits in 9.3 used to correct and improve this.
Jeff Janes based upon a proposal by Simon Riggs, who also reviewed
Additional review comments from Amit Kapila
When a process is waiting for a heavyweight lock, we will now indicate
the type of heavyweight lock for which it is waiting. Also, you can
now see when a process is waiting for a lightweight lock - in which
case we will indicate the individual lock name or the tranche, as
appropriate - or for a buffer pin.
Amit Kapila, Ildus Kurbangaliev, reviewed by me. Lots of helpful
discussion and suggestions by many others, including Alexander
Korotkov, Vladimir Borodin, and many others.
Renaming a file using rename(2) is not guaranteed to be durable in face
of crashes; especially on filesystems like xfs and ext4 when mounted
with data=writeback. To be certain that a rename() atomically replaces
the previous file contents in the face of crashes and different
filesystems, one has to fsync the old filename, rename the file, fsync
the new filename, fsync the containing directory. This sequence is not
generally adhered to currently; which exposes us to data loss risks. To
avoid having to repeat this arduous sequence, introduce
durable_rename(), which wraps all that.
Also add durable_link_or_rename(). Several places use link() (with a
fallback to rename()) to rename a file, trying to avoid replacing the
target file out of paranoia. Some of those rename sequences need to be
durable as well. There seems little reason extend several copies of the
same logic, so centralize the link() callers.
This commit does not yet make use of the new functions; they're used in
a followup commit.
Author: Michael Paquier, Andres Freund
Discussion: 56583BDD.9060302@2ndquadrant.com
Backpatch: All supported branches
Using this facility, any utility command can report the target relation
upon which it is operating, if there is one, and up to 10 64-bit
counters; the intent of this is that users should be able to figure out
what a utility command is doing without having to resort to ugly hacks
like attaching strace to a backend.
As a demonstration, this adds very crude reporting to lazy vacuum; we
just report the target relation and nothing else. A forthcoming patch
will make VACUUM report a bunch of additional data that will make this
much more interesting. But this gets the basic framework in place.
Vinayak Pokale, Rahila Syed, Amit Langote, Robert Haas, reviewed by
Kyotaro Horiguchi, Jim Nasby, Thom Brown, Masahiko Sawada, Fujii Masao,
and Masanori Oyama.
Refactor so that the internal APIs in planner.c deal in PathTargets not
targetlists, and establish a more regular structure for deriving the
targets needed for successive steps.
There is more that could be done here; calculating the eval costs of each
successive target independently is both inefficient and wrong in detail,
since we won't actually recompute values available from the input node's
tlist. But it's no worse than what happened before the pathification
rewrite. In any case this seems like a good starting point for considering
how to handle Konstantin Knizhnik's function-evaluation-postponement patch.
Instead of having planner.c compute a groupColIdx array and store it in
GroupingSetsPaths, make create_groupingsets_plan() find the grouping
columns by searching in the child plan node's tlist. Although that's
probably a bit slower for create_groupingsets_plan(), it's more like
the way every other plan node type does this, and it provides positive
confirmation that we know which child output columns we're supposed to be
grouping on. (Indeed, looking at this now, I'm not at all sure that it
wasn't broken before, because create_groupingsets_plan() isn't demanding
an exact tlist match from its child node.) Also, this allows substantial
simplification in planner.c, because it no longer needs to compute the
groupColIdx array at all; no other cases were using it.
I'd intended to put off this refactoring until later (like 9.7), but
in view of the likely bug fix and the need to rationalize planner.c's
tlist handling so we can do something sane with Konstantin Knizhnik's
function-evaluation-postponement patch, I think it can't wait.
This patch removes some redundant cost calculations that I left for later
cleanup in commit 3fc6e2d7f5. There's now a uniform policy that the
make_foo() convenience functions don't do any cost calculations. Most of
their callers copy costs from the source Path node, and for those that
don't, the calculation in the make_foo() function wasn't necessarily right
anyhow. (make_result() was particularly a mess, as it was serving multiple
callers using cost calcs designed for only the first one or two that had
ever existed.) Aside from saving a few cycles, this ensures that what
EXPLAIN prints matches the costs we used for planning purposes. It does
not change any planner decisions, since the decisions are already made.
For example, if you want to perform an ioctl() on a file descriptor
opened through the fd.c routines, there's no way to do that without
being able to get at the underlying fd.
KaiGai Kohei
Commit a892234f83 added a second bit per
page to the visibility map, which still seems like a good idea, but it
also added a second page-level bit alongside PD_ALL_VISIBLE to track
whether the visibility map bit was set. That no longer seems like a
clever plan, because we don't really need that bit for anything. We
always clear both bits when the page is modified anyway.
Patch by me, reviewed by Kyotaro Horiguchi and Masahiko Sawada.
I've been saying we needed to do this for more than five years, and here it
finally is. This patch removes the ever-growing tangle of spaghetti logic
that grouping_planner() used to use to try to identify the best plan for
post-scan/join query steps. Now, there is (nearly) independent
consideration of each execution step, and entirely separate construction of
Paths to represent each of the possible ways to do that step. We choose
the best Path or set of Paths using the same add_path() logic that's been
used inside query_planner() for years.
In addition, this patch removes the old restriction that subquery_planner()
could return only a single Plan. It now returns a RelOptInfo containing a
set of Paths, just as query_planner() does, and the parent query level can
use each of those Paths as the basis of a SubqueryScanPath at its level.
This allows finding some optimizations that we missed before, wherein a
subquery was capable of returning presorted data and thereby avoiding a
sort in the parent level, making the overall cost cheaper even though
delivering sorted output was not the cheapest plan for the subquery in
isolation. (A couple of regression test outputs change in consequence of
that. However, there is very little change in visible planner behavior
overall, because the point of this patch is not to get immediate planning
benefits but to create the infrastructure for future improvements.)
There is a great deal left to do here. This patch unblocks a lot of
planner work that was basically impractical in the old code structure,
such as allowing FDWs to implement remote aggregation, or rewriting
plan_set_operations() to allow consideration of multiple implementation
orders for set operations. (The latter will likely require a full
rewrite of plan_set_operations(); what I've done here is only to fix it
to return Paths not Plans.) I have also left unfinished some localized
refactoring in createplan.c and planner.c, because it was not necessary
to get this patch to a working state.
Thanks to Robert Haas, David Rowley, and Amit Kapila for review.
When decoding the old version of an UPDATE or DELETE change, and if that
tuple was bigger than MaxHeapTupleSize, we either Assert'ed out, or
failed in more subtle ways in non-assert builds. Normally individual
tuples aren't bigger than MaxHeapTupleSize, with big datums toasted.
But that's not the case for the old version of a tuple for logical
decoding; the replica identity is logged as one piece. With the default
replica identity btree limits that to small tuples, but that's not the
case for FULL.
Change the tuple buffer infrastructure to separate allocate over-large
tuples, instead of always going through the slab cache.
This unfortunately requires changing the ReorderBufferTupleBuf
definition, we need to store the allocated size someplace. To avoid
requiring output plugins to recompile, don't store HeapTupleHeaderData
directly after HeapTupleData, but point to it via t_data; that leaves
rooms for the allocated size. As there's no reason for an output plugin
to look at ReorderBufferTupleBuf->t_data.header, remove the field. It
was just a minor convenience having it directly accessible.
Reported-By: Adam Dratwiński
Discussion: CAKg6ypLd7773AOX4DiOGRwQk1TVOQKhNwjYiVjJnpq8Wo+i62Q@mail.gmail.com
Logical decoding's reorderbuffer keeps transactions in an LSN ordered
list for efficiency. To make that's efficiently possible upper-level
xids are forced to be logged before nested subtransaction xids. That
only works though if these records are all looked at: Unfortunately we
didn't do so for e.g. row level locks, which are otherwise uninteresting
for logical decoding.
This could lead to errors like:
"ERROR: subxact logged without previous toplevel record".
It's not sufficient to just look at row locking records, the xid could
appear first due to a lot of other types of records (which will trigger
the transaction to be marked logged with MarkCurrentTransactionIdLoggedIfAny).
So invent infrastructure to tell reorderbuffer about xids seen, when
they'd otherwise not pass through reorderbuffer.c.
Reported-By: Jarred Ward
Bug: #13844
Discussion: 20160105033249.1087.66040@wrigleys.postgresql.org
Backpatch: 9.4, where logical decoding was added
Add four new SQL accessible functions: pg_control_system(),
pg_control_checkpoint(), pg_control_recovery(), and pg_control_init()
which expose a subset of the control file data.
Along the way move the code to read and validate the control file to
src/common, where it can be shared by the new backend functions
and the original pg_controldata frontend program.
Patch by me, significant input, testing, and review by Michael Paquier.
Now it's possible to load recent version of Hunspell for several languages.
To handle these dictionaries Hunspell patch adds support for:
* FLAG long - sets the double extended ASCII character flag type
* FLAG num - sets the decimal number flag type (from 1 to 65535)
* AF parameter - alias for flag's set
Also it moves test dictionaries into separate directory.
Author: Artur Zakirov with editorization by me
606c0123d6 attempted to reduce cost of index scans using > and <
strategies, though got that completely wrong in a few complex cases.
Revert whole patch until we find a safe optimization.
Commits 9ff60273e3 and dbe2328959 adjusted the declarations
of some core functions referenced by contrib/tsearch2's install script,
forgetting that in a pg_upgrade situation, we'll be trying to restore
operator class definitions that reference the old signatures. We've
hit this problem before; solve it in the same way as before, namely by
installing stub functions that have the expected signature and just
invoke the correct function. Per report from Jeff Janes.
(Someday we ought to stop supporting contrib/tsearch2, but I'm not
sure today is that day.)
The new bit indicates whether every tuple on the page is already frozen.
It is cleared only when the all-visible bit is cleared, and it can be
set only when we vacuum a page and find that every tuple on that page is
both visible to every transaction and in no need of any future
vacuuming.
A future commit will use this new bit to optimize away full-table scans
that would otherwise be triggered by XID wraparound considerations. A
page which is merely all-visible must still be scanned in that case, but
a page which is all-frozen need not be. This commit does not attempt
that optimization, although that optimization is the goal here. It
seems better to get the basic infrastructure in place first.
Per discussion, it's very desirable for pg_upgrade to automatically
migrate existing VM forks from the old format to the new format. That,
too, will be handled in a follow-on patch.
Masahiko Sawada, reviewed by Kyotaro Horiguchi, Fujii Masao, Amit
Kapila, Simon Riggs, Andres Freund, and others, and substantially
revised by me.
This is basically a bug fix; the old code assumes that a ForeignScan
is always parallel-safe, but for postgres_fdw, for example, this is
definitely false. It should be true for file_fdw, though, since a
worker can read a file from the filesystem just as well as any other
backend process.
Original patch by Thomas Munro. Documentation, and changes to the
comments, by me.
This patch introduces "pg_blocking_pids(int) returns int[]", which returns
the PIDs of any sessions that are blocking the session with the given PID.
Historically people have obtained such information using a self-join on
the pg_locks view, but it's unreasonably tedious to do it that way with any
modicum of correctness, and the addition of parallel queries has pretty
much broken that approach altogether. (Given some more columns in the view
than there are today, you could imagine handling parallel-query cases with
a 4-way join; but ugh.)
The new function has the following behaviors that are painful or impossible
to get right via pg_locks:
1. Correctly understands which lock modes block which other ones.
2. In soft-block situations (two processes both waiting for conflicting lock
modes), only the one that's in front in the wait queue is reported to
block the other.
3. In parallel-query cases, reports all sessions blocking any member of
the given PID's lock group, and reports a session by naming its leader
process's PID, which will be the pg_backend_pid() value visible to
clients.
The motivation for doing this right now is mostly to fix the isolation
tests. Commit 38f8bdcac4 lobotomized
isolationtester's is-it-waiting query by removing its ability to recognize
nonconflicting lock modes, as a crude workaround for the inability to
handle soft-block situations properly. But even without the lock mode
tests, the old query was excessively slow, particularly in
CLOBBER_CACHE_ALWAYS builds; some of our buildfarm animals fail the new
deadlock-hard test because the deadlock timeout elapses before they can
probe the waiting status of all eight sessions. Replacing the pg_locks
self-join with use of pg_blocking_pids() is not only much more correct, but
a lot faster: I measure it at about 9X faster in a typical dev build with
Asserts, and 3X faster in CLOBBER_CACHE_ALWAYS builds. That should provide
enough headroom for the slower CLOBBER_CACHE_ALWAYS animals to pass the
test, without having to lengthen deadlock_timeout yet more and thus slow
down the test for everyone else.
We don't really need this field, because it's either zero or redundant with
PGPROC.pid. The use of zero to mark "not a group leader" is not necessary
since we can just as well test whether lockGroupLeader is NULL. This does
not save very much, either as to code or data, but the simplification seems
worthwhile anyway.
Coverity griped about use of unchecked strcpy() into a local variable.
There's unlikely to be any actual bug there, since no caller would be
passing a path longer than MAXPGPATH, but nonetheless use of strlcpy()
seems preferable.
While at it, get rid of unmaintainable separation between list of
field names and list of field values in favor of initializing them
in parallel. And we might as well declare get_configdata()'s path
argument as const char *, even though no current caller needs that.
Reflow text in lock manager README so that it fits within 80 columns.
Correct some mistakes. Expand the README to explain not only why group
locking exists but also the data structures that support it. Improve
comments related to group locking several files. Change the name of a
macro argument for improved clarity.
Most of these problems were reported by Tom Lane, but I found a few
of them myself.
Robert Haas and Tom Lane
This will parse strings in the format produced by pg_size_pretty() and
return sizes in bytes. This allows queries to be written with clauses
like "pg_total_relation_size(oid) > pg_size_bytes('10 GB')".
Author: Pavel Stehule with various improvements by Vitaly Burovoy
Discussion: http://www.postgresql.org/message-id/CAFj8pRD-tGoDKnxdYgECzA4On01_uRqPrwF-8LdkSE-6bDHp0w@mail.gmail.com
Reviewed-by: Vitaly Burovoy, Oleksandr Shulgin, Kyotaro Horiguchi,
Michael Paquier and Robert Haas
Architecture reference material specifies this order, and s_lock.h
inline assembly agrees. The former order failed to provide mutual
exclusion to lwlock.c and perhaps to other clients. The two xlc
buildfarm members, hornet and mandrill, have failed sixteen times with
duplicate key errors involving pg_class_oid_index or pg_type_oid_index.
Back-patch to 9.5, where commit b64d92f1a5
introduced atomics.
Reviewed by Andres Freund and Tom Lane.
Up to now, there's been an assumption that all Paths for a given relation
compute the same output column set (targetlist). However, there are good
reasons to remove that assumption. For example, an indexscan on an
expression index might be able to return the value of an expensive function
"for free". While we have the ability to generate such a plan today in
simple cases, we don't have a way to model that it's cheaper than a plan
that computes the function from scratch, nor a way to create such a plan
in join cases (where the function computation would normally happen at
the topmost join node). Also, we need this so that we can have Paths
representing post-scan/join steps, where the targetlist may well change
from one step to the next. Therefore, invent a "struct PathTarget"
representing the columns we expect a plan step to emit. It's convenient
to include the output tuple width and tlist evaluation cost in this struct,
and there will likely be additional fields in future.
While Path nodes that actually do have custom outputs will need their own
PathTargets, it will still be true that most Paths for a given relation
will compute the same tlist. To reduce the overhead added by this patch,
keep a "default PathTarget" in RelOptInfo, and allow Paths that compute
that column set to just point to their parent RelOptInfo's reltarget.
(In the patch as committed, actually every Path is like that, since we
do not yet have any cases of custom PathTargets.)
I took this opportunity to provide some more-honest costing of
PlaceHolderVar evaluation. Up to now, the assumption that "scan/join
reltargetlists have cost zero" was applied not only to Vars, where it's
reasonable, but also PlaceHolderVars where it isn't. Now, we add the eval
cost of a PlaceHolderVar's expression to the first plan level where it can
be computed, by including it in the PathTarget cost field and adding that
to the cost estimates for Paths. This isn't perfect yet but it's much
better than before, and there is a way forward to improve it more. This
costing change affects the join order chosen for a couple of the regression
tests, changing expected row ordering.
Move and refactor the underlying code for the pg_config client
application to src/common in support of sharing it with a new
system information SRF called pg_config() which makes the same
information available via SQL. Additionally wrap the SRF with a
new system view, as called pg_config.
Patch by me with extensive input and review by Michael Paquier
and additional review by Alvaro Herrera.
When processing ordered aggregates following a sort that could make use
of the abbreviated key optimization, only call the equality operator to
compare successive pairs of tuples when their abbreviated keys were not
equal.
Peter Geoghegan, reviewd by Andreas Karlsson and by me.
In commit 7b4bfc87 the DATA and DESCR entries for the new
row_security_active() function were inadvertantly put after
the PROVOLATILE defines, rather than before as they should
have been placed. Move them up where they belong.
Backpatch to 9.5 where the new entries were introduced.
Commit 4de82f7d7 increased the WAL flush rate, mainly to increase the
likelihood that hint bits can be set quickly. More quickly set hint bits
can reduce contention around the clog et al. But unfortunately the
increased flush rate can have a significant negative performance impact,
I have measured up to a factor of ~4. The reason for this slowdown is
that if there are independent writes to the underlying devices, for
example because shared buffers is a lot smaller than the hot data set,
or because a checkpoint is ongoing, the fdatasync() calls force cache
flushes to be emitted to the storage.
This is achieved by flushing WAL only if the last flush was longer than
wal_writer_delay ago, or if more than wal_writer_flush_after (new GUC)
unflushed blocks are pending. Based on some tests the default for
wal_writer_delay is 1MB, which seems to work well both on SSD and
rotational media.
To avoid negative performance impact due to 4de82f7d7 an earlier
commit (db76b1e) made SetHintBits() more likely to succeed; preventing
performance regressions in the pgbench tests I performed.
Discussion: 20160118163908.GW10941@awork2.anarazel.de
Reportedly, some compilers warn about tests like "c < 0" if c is unsigned,
and hence complain about the character range checks I added in commit
3bb3f42f37. This is a bit of a pain since
the regex library doesn't really want to assume that chr is unsigned.
However, since any such reconfiguration would involve manual edits of
regcustom.h anyway, we can put it on the shoulders of whoever wants to
do that to adjust this new range-checking macro correctly.
Per gripes from Coverity and Andres.
An extensible node is always tagged T_Extensible, but the extnodename
field identifies it more specifically; it may also include arbitrary
private data. Extensible nodes can be copied, tested for equality,
serialized, and deserialized, but the core system doesn't know
anything about them otherwise. Some extensions may find it useful to
include these nodes in fdw_private or custom_private lists in lieu of
arm-wrestling their data into a format that the core code can
understand.
Along the way, so as not to burden the authors of such extensible
node types too much, expose the functions for writing serialized
tokens, and for serializing and deserializing bitmapsets.
KaiGai Kohei, per a design suggested by me. Reviewed by Andres Freund
and by me, and further edited by me.
If a GROUP BY clause includes all columns of a non-deferred primary key,
as well as other columns of the same relation, those other columns are
redundant and can be dropped from the grouping; the pkey is enough to
ensure that each row of the table corresponds to a separate group.
Getting rid of the excess columns will reduce the cost of the sorting or
hashing needed to implement GROUP BY, and can indeed remove the need for
a sort step altogether.
This seems worth testing for since many query authors are not aware of
the GROUP-BY-primary-key exception to the rule about queries not being
allowed to reference non-grouped-by columns in their targetlists or
HAVING clauses. Thus, redundant GROUP BY items are not uncommon. Also,
we can make the test pretty cheap in most queries where it won't help
by not looking up a rel's primary key until we've found that at least
two of its columns are in GROUP BY.
David Rowley, reviewed by Julien Rouhaud
A pending patch requires exporting a function returning Bitmapset from
catalog/pg_constraint.c. As things stand, that would mean including
nodes/bitmapset.h in pg_constraint.h, which might be hazardous for the
client-side includability of that header. It's not entirely clear whether
any client-side code needs to include pg_constraint.h, but it seems prudent
to assume that there is some such code somewhere. Therefore, split off the
function definitions into a new file pg_constraint_fn.h, similarly to what
we've done for some other catalog header files.
This finishes the work - spread across many commits over the last
several months - of putting each type of lock other than the named
individual locks into a separate tranche.
Amit Kapila
Commit 0e141c0fbb introduced a new
facility to reduce ProcArrayLock contention by clearing several XIDs
from the ProcArray under a single lock acquisition. The names
initially chosen were deemed not to be very good choices, so commit
4aec49899e renamed them. But now it
seems like we still didn't get it right. A pending patch wants to
add similar infrastructure for batching CLOG updates, so the names
need to be clear enough to allow a new set of structure members with
a related purpose.
Amit Kapila
As of commit c1772ad922, there's no
longer any way of requesting additional LWLocks in the main tranche,
so we don't need NumLWLocks() or LWLockAssign() any more. Also,
some of the allocation counters that we had previously aren't needed
any more either.
Amit Kapila
This is a quick hack, due to be reverted when its purpose has been served,
to try to gather information about why some of the buildfarm critters
regularly fail with "postmaster does not shut down" complaints. Maybe they
are just really overloaded, but maybe something else is going on. Hence,
instrument pg_ctl to print the current time when it starts waiting for
postmaster shutdown and when it gives up, and add a lot of logging of the
current time in the server's checkpoint and shutdown code paths.
No attempt has been made to make this pretty. I'm not even totally sure
if it will build on Windows, but we'll soon find out.
Previously, our regex code defined CHR_MAX as 0xfffffffe, which is a
bad choice because it is outside the range of type "celt" (int32).
Characters approaching that limit could lead to infinite loops in logic
such as "for (c = a; c <= b; c++)" where c is of type celt but the
range bounds are chr. Such loops will work safely only if CHR_MAX+1
is representable in celt, since c must advance to beyond b before the
loop will exit.
Fortunately, there seems no reason not to restrict CHR_MAX to 0x7ffffffe.
It's highly unlikely that Unicode will ever assign codes that high, and
none of our other backend encodings need characters beyond that either.
In addition to modifying the macro, we have to explicitly enforce character
range restrictions on the values of \u, \U, and \x escape sequences, else
the limit is trivially bypassed.
Also, the code for expanding case-independent character ranges in bracket
expressions had a potential integer overflow in its calculation of the
number of characters it could generate, which could lead to allocating too
small a character vector and then overwriting memory. An attacker with the
ability to supply arbitrary regex patterns could easily cause transient DOS
via server crashes, and the possibility for privilege escalation has not
been ruled out.
Quite aside from the integer-overflow problem, the range expansion code was
unnecessarily inefficient in that it always produced a result consisting of
individual characters, abandoning the knowledge that we had a range to
start with. If the input range is large, this requires excessive memory.
Change it so that the original range is reported as-is, and then we add on
any case-equivalent characters that are outside that range. With this
approach, we can bound the number of individual characters allowed without
sacrificing much. This patch allows at most 100000 individual characters,
which I believe to be more than the number of case pairs existing in
Unicode, so that the restriction will never be hit in practice.
It's still possible for range() to take awhile given a large character code
range, so also add statement-cancel detection to its loop. The downstream
function dovec() also lacked cancel detection, and could take a long time
given a large output from range().
Per fuzz testing by Greg Stark. Back-patch to all supported branches.
Security: CVE-2016-0773
When force_parallel_mode = true, we enable the parallel mode restrictions
for all queries for which this is believed to be safe. For the subset of
those queries believed to be safe to run entirely within a worker, we spin
up a worker and run the query there instead of running it in the
original process. When force_parallel_mode = regress, make additional
changes to allow the regression tests to run cleanly even though parallel
workers have been injected under the hood.
Taken together, this facilitates both better user testing and better
regression testing of the parallelism code.
Robert Haas, with help from Amit Kapila and Rushabh Lathia.
For locking purposes, we now regard heavyweight locks as mutually
non-conflicting between cooperating parallel processes. There are some
possible pitfalls to this approach that are not to be taken lightly,
but it works OK for now and can be changed later if we find a better
approach. Without this, it's very easy for parallel queries to
silently self-deadlock if the user backend holds strong relation locks.
Robert Haas, with help from Amit Kapila. Thanks to Noah Misch and
Andres Freund for extensive discussion of possible issues with this
approach.
It seems that sprintf(), at least in glibc's version, is unreasonably slow
compared to hand-rolled code for printing integers. Replacing most uses of
sprintf() in the datetime.c output functions with special-purpose code
turns out to give more than a 2X speedup in COPY of a table with a single
timestamp column; which is pretty impressive considering all the other
logic in that code path.
David Rowley and Andres Freund, reviewed by Peter Geoghegan and myself
An example use-case is "CHECK(num_nonnulls(a,b,c) = 1)" to assert that
exactly one of a,b,c isn't NULL. The functions are variadic, so they
can also be pressed into service to count the number of null or nonnull
elements in an array.
Marko Tiikkaja, reviewed by Pavel Stehule
GetExistingLocalJoinPath() is useful for handling EvalPlanQual rechecks
properly, and GetUserMappingById() is needed to make sure you're using
the right credentials.
Shigeru Hanada, Etsuro Fujita, Ashutosh Bapat, Robert Haas
The previous RequestAddinLWLocks() method had several disadvantages.
First, the locks would be in the main tranche; we've recently decided
that it's useful for LWLocks used for separate purposes to have
separate tranche IDs. Second, there wasn't any correlation between
what code called RequestAddinLWLocks() and what code called
LWLockAssign(); when multiple modules are in use, it could become
quite difficult to troubleshoot problems where LWLockAssign() ran out
of locks. To fix, create a concept of named LWLock tranches which
can be used either by extension or by core code.
Amit Kapila and Robert Haas
Have varlena.c expose an interface that allows the char(n), bytea, and
bpchar types to piggyback on a now-generalized SortSupport for text.
This pushes a little more knowledge of the bpchar/char(n) type into
varlena.c than might be preferred, but that seems like the approach
that creates least friction. Also speed things up for index builds
that use text_pattern_ops or varchar_pattern_ops.
This patch does quite a bit of renaming, but it seems likely to be
worth it, so as to avoid future confusion about the fact that this code
is now more generally used than the old names might have suggested.
Peter Geoghegan, reviewed by Álvaro Herrera and Andreas Karlsson,
with small tweaks by me.
This patch doesn't put the new infrastructure to use anywhere, and
indeed it's not clear how it could ever be used for something like
postgres_fdw which has to send an SQL query and wait for a reply,
but there might be FDWs or custom scan providers that are CPU-bound,
so let's give them a way to join club parallel.
KaiGai Kohei, reviewed by me.
You can't really do anything useful with this in the form it currently
exists; among other problems, there's no way to reread whatever
information might be produced when the path is output. Work is
underway to replace this with a more useful and more general system of
extensible nodes, but let's start by getting rid of this bit.
Extracted from a larger patch by KaiGai Kohei.
Insert sd_notify() calls at server start and stop for integration with
systemd. This allows the use of systemd service units of type "notify",
which greatly simplifies the systemd configuration.
Reviewed-by: Pavel Stěhule <pavel.stehule@gmail.com>
Apparently at least one committer hasn't gotten the word that these do not
need to be maintained by hand, since initdb will create them automatically.
Noted while fixing bug #13905.
No catversion bump since the post-initdb state is exactly the same either
way. I don't see a need for back-patch, either.
All the other jsonb function descriptions refer to the arguments as being
"jsonb", but these two said "json". Make it consistent. Per bug #13905
from Petru Florin Mihancea.
No catversion bump --- we can't force one in the back branches, and this
isn't very critical anyway.
This is following in a long train of similar changes and for the same
reasons - see b319356f0e and
fe702a7b3f inter alia.
Author: Amit Kapila
Reviewed-by: Alexander Korotkov, Robert Haas
Previously, each PGPROC's backendLock was part of the main tranche,
and the PGPROC just contained a pointer. Now, the actual LWLock is
part of the PGPROC.
As with previous, similar patches, this makes it significantly easier
to identify these lwlocks in LWLOCK_STATS or Trace_lwlocks output
and improves modularity.
Author: Ildus Kurbangaliev
Reviewed-by: Amit Kapila, Robert Haas
Previously, the foreign join pushdown infrastructure left the question
of security entirely up to individual FDWs, but it would be easy for
a foreign data wrapper to inadvertently open up subtle security holes
that way. So, make it the core code's job to determine which user
mapping OID is relevant, and don't attempt join pushdown unless it's
the same for all relevant relations.
Per a suggestion from Tom Lane. Shigeru Hanada and Ashutosh Bapat,
reviewed by Etsuro Fujita and KaiGai Kohei, with some further
changes by me.
