walsender.h should depend on xlog.h, not vice versa. (Actually, the
inclusion was circular until a couple hours ago, which was even sillier;
but Bruce broke it in the expedient rather than logically correct
direction.) Because of that poor decision, plus blind application of
pgrminclude, we had a situation where half the system was depending on
xlog.h to include such unrelated stuff as array.h and guc.h. Clean up
the header inclusion, and manually revert a lot of what pgrminclude had
done so things build again.
This episode reinforces my feeling that pgrminclude should not be run
without adult supervision. Inclusion changes in header files in particular
need to be reviewed with great care. More generally, it'd be good if we
had a clearer notion of module layering to dictate which headers can sanely
include which others ... but that's a big task for another day.
The SSI patch inserted a call of RegisterPredicateLockingXid into
GetNewTransactionId, which was a bad idea on a couple of grounds. First,
it's not necessary to hold XidGenLock while manipulating that shared
memory, and doing so is bad because XidGenLock is a high-contention lock
that should be held for as short a time as possible. (Not to mention that
it adds an entirely unnecessary deadlock hazard, since we must take
SerializableXactHashLock as well.) Second, the specific place where it was
put was between extending CLOG and advancing nextXid, which could result in
unpleasant behavior in case of a failure there. Pull the call out to
AssignTransactionId, which is much safer and arguably better from a
modularity standpoint too.
There is more work to do to clean up the failure-before-advancing-nextXid
issue, but that is a separate change that will need to be back-patched.
So for the moment I just want to make GetNewTransactionId look the same as
it did in prior versions.
Until now, our Serializable mode has in fact been what's called Snapshot
Isolation, which allows some anomalies that could not occur in any
serialized ordering of the transactions. This patch fixes that using a
method called Serializable Snapshot Isolation, based on research papers by
Michael J. Cahill (see README-SSI for full references). In Serializable
Snapshot Isolation, transactions run like they do in Snapshot Isolation,
but a predicate lock manager observes the reads and writes performed and
aborts transactions if it detects that an anomaly might occur. This method
produces some false positives, ie. it sometimes aborts transactions even
though there is no anomaly.
To track reads we implement predicate locking, see storage/lmgr/predicate.c.
Whenever a tuple is read, a predicate lock is acquired on the tuple. Shared
memory is finite, so when a transaction takes many tuple-level locks on a
page, the locks are promoted to a single page-level lock, and further to a
single relation level lock if necessary. To lock key values with no matching
tuple, a sequential scan always takes a relation-level lock, and an index
scan acquires a page-level lock that covers the search key, whether or not
there are any matching keys at the moment.
A predicate lock doesn't conflict with any regular locks or with another
predicate locks in the normal sense. They're only used by the predicate lock
manager to detect the danger of anomalies. Only serializable transactions
participate in predicate locking, so there should be no extra overhead for
for other transactions.
Predicate locks can't be released at commit, but must be remembered until
all the transactions that overlapped with it have completed. That means that
we need to remember an unbounded amount of predicate locks, so we apply a
lossy but conservative method of tracking locks for committed transactions.
If we run short of shared memory, we overflow to a new "pg_serial" SLRU
pool.
We don't currently allow Serializable transactions in Hot Standby mode.
That would be hard, because even read-only transactions can cause anomalies
that wouldn't otherwise occur.
Serializable isolation mode now means the new fully serializable level.
Repeatable Read gives you the old Snapshot Isolation level that we have
always had.
Kevin Grittner and Dan Ports, reviewed by Jeff Davis, Heikki Linnakangas and
Anssi Kääriäinen
outside a transaction.
This repairs brain fade in my patch of 2009-08-30: the reason we had been
storing oldest-database name, not OID, in ShmemVariableCache was of course
to avoid having to do a catalog lookup at times when it might be unsafe.
This error explains why Aleksandr Dushein is having trouble getting out of
an XID wraparound state in bug #5718, though not how he got into that state
in the first place. I suspect pg_upgrade is at fault there.
Add some checks that seem logically necessary, in particular let's make
real sure that HS slave sessions cannot create temp tables. (If they did
they would think that temp tables belonging to the master's session with
the same BackendId were theirs. We *must* not allow myTempNamespace to
become set in a slave session.)
Change setval() and nextval() so that they are only allowed on temp sequences
in a read-only transaction. This seems consistent with what we allow for
table modifications in read-only transactions. Since an HS slave can't have a
temp sequence, this also provides a nicer cure for the setval PANIC reported
by Erik Rijkers.
Make the error messages more uniform, and have them mention the specific
command being complained of. This seems worth the trifling amount of extra
code, since people are likely to see such messages a lot more than before.
all the values derived from oldestXid, not just that field. Brain fade in
one of my patches associated with flat file removal, exposed by a report
from Fujii Masao.
With this change, xidVacLimit should always be valid, so remove a couple of
bits of complexity associated with the previous assumption that sometimes
it wouldn't get set right away.
The purpose of this change is to eliminate the need for every caller
of SearchSysCache, SearchSysCacheCopy, SearchSysCacheExists,
GetSysCacheOid, and SearchSysCacheList to know the maximum number
of allowable keys for a syscache entry (currently 4). This will
make it far easier to increase the maximum number of keys in a
future release should we choose to do so, and it makes the code
shorter, too.
Design and review by Tom Lane.
own database's datfrozenxid, if the current value is old enough to be
forcing autovacuums or warning messages. This ensures that a bogus
value is replaced as soon as possible. Per a comment from Heikki.
XID) in checkpoint records. This eliminates the need to recompute the value
from scratch during database startup, which is one of the two remaining
reasons for the flatfile code to exist. It should also simplify life for
hot-standby operation.
To avoid bloating the checkpoint records unreasonably, I switched from
tracking the oldest database by name to tracking it by OID. This turns
out to save cycles in general (everywhere but the warning-generating
paths, which we hardly care about) and also helps us deal with the case
that the oldest database got dropped instead of being vacuumed. The prior
coding might go for a long time without updating the wrap limit in that case,
which is bad because it might result in a lot of useless autovacuum activity.
documentation warnings against setting it nonzero unless active use of
prepared transactions is intended and a suitable transaction manager has been
installed. This should help to prevent the type of scenario we've seen
several times now where a prepared transaction is forgotten and eventually
causes severe maintenance problems (or even anti-wraparound shutdown).
The only real reason we had the default be nonzero in the first place was to
support regression testing of the feature. To still be able to do that,
tweak pg_regress to force a nonzero value during "make check". Since we
cannot force a nonzero value in "make installcheck", add a variant regression
test "expected" file that shows the results that will be obtained when
max_prepared_transactions is zero.
Also, extend the HINT messages for transaction wraparound warnings to mention
the possibility that old prepared transactions are causing the problem.
All per today's discussion.
vacuuming (it's not), say "database-wide VACUUM" instead of "full-database
VACUUM" in the relevant hint messages. Also, document the permissions needed
to do this. Per today's discussion.
ReadNewTransactionId from GetSnapshotData --- with a "latestCompletedXid"
variable that is updated during transaction commit or abort. Since
latestCompletedXid is written only in places that had to lock ProcArrayLock
exclusively anyway, and is read only in places that had to lock ProcArrayLock
shared anyway, it adds no new locking requirements to the system despite being
cluster-wide. Moreover, removing ReadNewTransactionId from snapshot
acquisition eliminates the need to take both XidGenLock and ProcArrayLock at
the same time. Since XidGenLock is sometimes held across I/O this can be a
significant win. Some preliminary benchmarking suggested that this patch has
no effect on average throughput but can significantly improve the worst-case
transaction times seen in pgbench. Concept by Florian Pflug, implementation
by Tom Lane.
continuously, and requests vacuum runs of "autovacuum workers" to postmaster.
The workers do the actual vacuum work. This allows for future improvements,
like allowing multiple autovacuum jobs running in parallel.
For now, the code keeps the original behavior of having a single autovac
process at any time by sleeping until the previous worker has finished.
in PITR scenarios. We now WAL-log the replacement of old XIDs with
FrozenTransactionId, so that such replacement is guaranteed to propagate to
PITR slave databases. Also, rather than relying on hint-bit updates to be
preserved, pg_clog is not truncated until all instances of an XID are known to
have been replaced by FrozenTransactionId. Add new GUC variables and
pg_autovacuum columns to allow management of the freezing policy, so that
users can trade off the size of pg_clog against the amount of freezing work
done. Revise the already-existing code that forces autovacuum of tables
approaching the wraparound point to make it more bulletproof; also, revise the
autovacuum logic so that anti-wraparound vacuuming is done per-table rather
than per-database. initdb forced because of changes in pg_class, pg_database,
and pg_autovacuum catalogs. Heikki Linnakangas, Simon Riggs, and Tom Lane.
PGPROC array into snapshots, and use this information to avoid visits
to pg_subtrans in HeapTupleSatisfiesSnapshot. This appears to solve
the pg_subtrans-related context swap storm problem that's been reported
by several people for 8.1. While at it, modify GetSnapshotData to not
take an exclusive lock on ProcArrayLock, as closer analysis shows that
shared lock is always sufficient.
Itagaki Takahiro and Tom Lane
To this end, add a couple of columns to pg_class, relminxid and relvacuumxid,
based on which we calculate the pg_database columns after each vacuum.
We now force all databases to be vacuumed, even template ones. A backend
noticing too old a database (meaning pg_database.datminxid is in danger of
falling behind Xid wraparound) will signal the postmaster, which in turn will
start an autovacuum iteration to process the offending database. In principle
this is only there to cope with frozen (non-connectable) databases without
forcing users to set them to connectable, but it could force regular user
database to go through a database-wide vacuum at any time. Maybe we should
warn users about this somehow. Of course the real solution will be to use
autovacuum all the time ;-)
There are some additional improvements we could have in this area: for example
the vacuum code could be smarter about not updating pg_database for each table
when called by autovacuum, and do it only once the whole autovacuum iteration
is done.
I updated the system catalogs documentation, but I didn't modify the
maintenance section. Also having some regression tests for this would be nice
but it's not really a very straightforward thing to do.
Catalog version bumped due to system catalog changes.
comment line where output as too long, and update typedefs for /lib
directory. Also fix case where identifiers were used as variable names
in the backend, but as typedefs in ecpg (favor the backend for
indenting).
Backpatch to 8.1.X.
not accepting queries).
errmsg("database is not accepting queries to avoid
wraparound data loss in database \"%s\"",
errhint("Stop the postmaster and use a standalone
backend to VACUUM database \"%s\".",
whenever we generate a new OID. This prevents occasional duplicate-OID
errors that can otherwise occur once the OID counter has wrapped around.
Duplicate relfilenode values are also checked for when creating new
physical files. Per my recent proposal.
communication structure, and make it its own module with its own lock.
This should reduce contention at least a little, and it definitely makes
the code seem cleaner. Per my recent proposal.
avoid encroaching on the 'user' range of OIDs by allowing automatic
OID assignment to use values below 16k until we reach normal operation.
initdb not forced since this doesn't make any incompatible change;
however a lot of stuff will have different OIDs after your next initdb.
the AMI_OVERRIDE flag. The fact that TransactionLogFetch treats
BootstrapTransactionId as always committed is sufficient to make
bootstrap work, and getting rid of extra tests in heavily used code
paths seems like a win. The files produced by initdb are demonstrably
the same after this change.
in GetNewTransactionId(). Since the limit value has to be computed
before we run any real transactions, this requires adding code to database
startup to scan pg_database and determine the oldest datfrozenxid.
This can conveniently be combined with the first stage of an attack on
the problem that the 'flat file' copies of pg_shadow and pg_group are
not properly updated during WAL recovery. The code I've added to
startup resides in a new file src/backend/utils/init/flatfiles.c, and
it is responsible for rewriting the flat files as well as initializing
the XID wraparound limit value. This will eventually allow us to get
rid of GetRawDatabaseInfo too, but we'll need an initdb so we can add
a trigger to pg_database.
number of active subtransaction XIDs in each backend's PGPROC entry,
and use this to avoid expensive probes into pg_subtrans during
TransactionIdIsInProgress. Extend EOXactCallback API to allow add-on
modules to get control at subxact start/end. (This is deliberately
not compatible with the former API, since any uses of that API probably
need manual review anyway.) Add basic reference documentation for
SAVEPOINT and related commands. Minor other cleanups to check off some
of the open issues for subtransactions.
Alvaro Herrera and Tom Lane.
performance front, but with feature freeze upon us I think it's time to
drive a stake in the ground and say that this will be in 7.5.
Alvaro Herrera, with some help from Tom Lane.
complete ExtendCLOG() before advancing nextXid, so that if that routine
fails, the next incoming transaction will try it again. Per trouble
report from Christopher Kings-Lynne.
pointer type when it is not necessary to do so.
For future reference, casting NULL to a pointer type is only necessary
when (a) invoking a function AND either (b) the function has no prototype
OR (c) the function is a varargs function.
> Changes to avoid collisions with WIN32 & MFC names...
> 1. Renamed:
> a. PROC => PGPROC
> b. GetUserName() => GetUserNameFromId()
> c. GetCurrentTime() => GetCurrentDateTime()
> d. IGNORE => IGNORE_DTF in include/utils/datetime.h & utils/adt/datetim
>
> 2. Added _P to some lex/yacc tokens:
> CONST, CHAR, DELETE, FLOAT, GROUP, IN, OUT
Jan
