Previously it was impossible to terminate these programs via control-C
while they were prompting for a password. We can fix that trivially
for their initial password prompts, by moving setup of the SIGINT
handler from just before to just after their initial GetConnection()
calls.
This fix doesn't permit escaping out of later re-prompts, but those
should be exceedingly rare, since the user's password or the server's
authentication setup would have to have changed meanwhile. We
considered applying a fix similar to commit 46d665bc2, but that
seemed more complicated than it'd be worth. Moreover, this way is
back-patchable, which that wasn't.
The misbehavior exists in all supported versions, so back-patch to all.
Tom Lane and Nathan Bossart
Discussion: https://postgr.es/m/747443.1635536754@sss.pgh.pa.us
Commit ac9099fc1 rearranged the logic in spgGetCache() that determines
the index's attType (nominal input data type) and leafType (actual
type stored in leaf index tuples). Turns out this broke things for
the case where (a) the actual input data type is different from the
nominal type, (b) the opclass's config function leaves leafType
defaulted, and (c) the opclass has no "compress" function. (b) caused
us to assign the actual input data type as leafType, and then since
that's not attType, we complained that a "compress" function is
required. For non-polymorphic opclasses, condition (a) arises in
binary-compatible cases, such as using SP-GiST text_ops for a varchar
column, or using any opclass on a domain over its nominal input type.
To fix, use attType for leafType when the index's declared column type
is different from but binary-compatible with attType. Do this only in
the defaulted-leafType case, to avoid overriding any explicit
selection made by the opclass.
Per bug #17294 from Ilya Anfimov. Back-patch to v14.
Discussion: https://postgr.es/m/17294-8f6c7962ce877edc@postgresql.org
While determining xid horizons, we skip over backends that are running
Vacuum. We also ignore Create Index Concurrently, or Reindex Concurrently
for the purposes of computing Xmin for Vacuum. But we were not setting the
flags corresponding to these operations when they are performed in
parallel which was preventing Xid horizon from advancing.
The optimization related to skipping Create Index Concurrently, or Reindex
Concurrently operations was implemented in PG-14 but the fix is the same
for the Parallel Vacuum as well so back-patched till PG-13.
Author: Masahiko Sawada
Reviewed-by: Amit Kapila
Backpatch-through: 13
Discussion: https://postgr.es/m/CAD21AoCLQqgM1sXh9BrDFq0uzd3RBFKi=Vfo6cjjKODm0Onr5w@mail.gmail.com
This commit adds to the main regression test suite a table with all
the in-core data types (some exceptions apply). This table is not
dropped, so as pg_upgrade would be able to check the binary
compatibility of the types tracked in the table. If a new type is added
in core, this part of the tests would need a refresh but the tests are
designed to fail if that were to happen.
As this is useful for upgrades and that these rely on the objects
created in the regression test suite of the old version upgraded from,
a backpatch down to 12 is done, which is the last point where a binary
incompatible change has been done (7c15cef). This will hopefully be
enough to find out if something gets broken during the development of a
new version of Postgres, so as it is possible to take actions in
pg_upgrade itself in this case (like 0ccfc28 for sql_identifier).
An area that is not covered yet is related to external modules, which
may create their own types. The testing infrastructure of pg_upgrade is
not integrated yet with the external modules stored in core
(src/test/modules/ or contrib/, all use the same database name for their
tests so there would be an overlap). This could be improved in the
future.
Author: Justin Pryzby
Reviewed-by: Jacob Champion, Peter Eisentraut, Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/20201206180248.GI24052@telsasoft.com
Backpatch-through: 12
The error handling here was a mess, as a result of a fundamentally
bad design (relying on errno to keep its value much longer than is
safe to assume) as well as a lot of just plain sloppiness, both as
to noticing errors at all and as to reporting the correct errno.
Moreover, the recent addition of LZ4 compression broke things
completely, because liblz4 doesn't use errno to report errors.
To improve matters, keep the error state in the DirectoryMethodData or
TarMethodData struct, and add a string field so we can handle cases
that don't set errno. (The tar methods already had a version of this,
but it can be done more efficiently since all these cases use a
constant error string.) Make the dir and tar methods handle errors
in basically identical ways, which they didn't before.
This requires copying errno into the state struct in a lot of places,
which is a bit tedious, but it has the virtue that we can get rid of
ad-hoc code to save and restore errno in a number of places ... not
to mention that it fixes other places that should've saved/restored
errno but neglected to.
In passing, fix some pointlessly static buffers to be ordinary
local variables.
There remains an issue about exactly how to handle errors from
fsync(), but that seems like material for its own patch.
While the LZ4 problems are new, all the rest of this is fixes for
old bugs, so backpatch to v10 where walmethods.c was introduced.
Patch by me; thanks to Michael Paquier for review.
Discussion: https://postgr.es/m/1343113.1636489231@sss.pgh.pa.us
Coverity complained that applying get_gz_error after a failed gzclose,
as we did in one place in pg_basebackup, is unsafe. I think it's
right: it's entirely likely that the call is touching freed memory.
Change that to inspect errno, as we do for other gzclose calls.
Also, be careful to initialize errno to zero immediately before any
gzclose() call where we care about the error status. (There are
some calls where we don't, because we already failed at some previous
step.) This ensures that we don't get a misleadingly irrelevant
error code if gzclose() fails in a way that doesn't set errno.
We could work harder at that, but it looks to me like all such cases
are basically can't-happen if we're not misusing zlib, so it's
not worth the extra notational cruft that would be required.
Also, fix several places that simply failed to check for close-time
errors at all, mostly at some remove from the close or gzclose itself;
and one place that did check but didn't bother to report the errno.
Back-patch to v12. These mistakes are older than that, but between
the frontend logging API changes that happened in v12 and the fact
that frontend code can't rely on %m before that, the patch would need
substantial revision to work in older branches. It doesn't quite
seem worth the trouble given the lack of related field complaints.
Patch by me; thanks to Michael Paquier for review.
Discussion: https://postgr.es/m/1343113.1636489231@sss.pgh.pa.us
If a SQL-standard function body contains an INSERT ... SELECT statement,
any function parameters referenced within the SELECT were always printed
in $N style, rather than using the parameter name if any. While not
strictly incorrect, this wasn't the intention, and it's inconsistent
with the way that such parameters would be printed in any other kind
of statement.
The cause is that the recursion to get_query_def from
get_insert_query_def neglected to pass down the context->namespaces
list, passing constant NIL instead. This is a very ancient oversight,
but AFAICT it had no visible consequences before commit e717a9a18
added an outermost namespace with function parameters. We don't allow
INSERT ... SELECT as a sub-query, except in a top-level WITH clause,
where it couldn't contain any outer references that might need to access
upper namespaces. So although that's arguably a bug, I don't see any
point in changing it before v14.
In passing, harden the code added to get_parameter by e717a9a18 so that
it won't crash if a PARAM_EXTERN Param appears in an unexpected place.
Per report from Erki Eessaar. Code fix by me, regression test case
by Masahiko Sawada.
Discussion: https://postgr.es/m/AM9PR01MB8268347BED344848555167FAFE949@AM9PR01MB8268.eurprd01.prod.exchangelabs.com
When changing REPLICA IDENTITY INDEX to another one, the target table's
relcache was not being invalidated. This leads to skipping update/delete
operations during apply on the subscriber side as the columns required to
search corresponding rows won't get logged.
Author: Tang Haiying, Hou Zhijie
Reviewed-by: Euler Taveira, Amit Kapila
Backpatch-through: 10
Discussion: https://postgr.es/m/OS0PR01MB61133CA11630DAE45BC6AD95FB939@OS0PR01MB6113.jpnprd01.prod.outlook.com
The documentation says plainly that \password acts on "the current user"
by default. What it actually acted on, or tried to, was the username
used to log into the current session. This is not the same thing if
one has since done SET ROLE or SET SESSION AUTHENTICATION. Aside from
the possible surprise factor, it's quite likely that the current role
doesn't have permissions to set the password of the original role.
To fix, use "SELECT CURRENT_USER" to get the role name to act on.
(This syntax works with servers at least back to 7.0.) Also, in
hopes of reducing confusion, include the role name that will be
acted on in the password prompt.
The discrepancy from the documentation makes this a bug, so
back-patch to all supported branches.
Patch by me; thanks to Nathan Bossart for review.
Discussion: https://postgr.es/m/747443.1635536754@sss.pgh.pa.us
pg_stat_get_slru() in pgstatfuncs.c would point to one element after the
end of the array PgStat_SLRUStats when finishing to scan its entries.
This had no direct consequences as no data from the extra memory area
was read, but static analyzers would rightfully complain here. So let's
be clean.
While on it, this adds one regression test in the area reserved for
system views.
Reported-by: Alexander Kozhemyakin, via AddressSanitizer
Author: Kyotaro Horiguchi
Discussion: https://postgr.es/m/17280-37da556e86032070@postgresql.org
Backpatch-through: 13
Buildfarm members kittiwake and tadarida have witnessed errors at this
site. The site discarded key facts. Back-patch to v10 (all supported
versions).
Reviewed by Michael Paquier and Tom Lane.
Discussion: https://postgr.es/m/20211107013157.GB790288@rfd.leadboat.com
PostgreSQL 13 and newer versions are directly impacted by that through
the SQL function normalize(), which would cause a call of this function
to write one byte past its allocation if using in input an empty
string after recomposing the string with NFC and NFKC. Older versions
(v10~v12) are not directly affected by this problem as the only code
path using normalization is SASLprep in SCRAM authentication that
forbids the case of an empty string, but let's make the code more robust
anyway there so as any out-of-core callers of this function are covered.
The solution chosen to fix this issue is simple, with the addition of a
fast-exit path if the decomposed string is found as empty. This would
only happen for an empty string as at its lowest level a codepoint would
be decomposed as itself if it has no entry in the decomposition table or
if it has a decomposition size of 0.
Some tests are added to cover this issue in v13~. Note that an empty
string has always been considered as normalized (grammar "IS NF[K]{C,D}
NORMALIZED", through the SQL function is_normalized()) for all the
operations allowed (NFC, NFD, NFKC and NFKD) since this feature has been
introduced as of 2991ac5. This behavior is unchanged but some tests are
added in v13~ to check after that.
I have also checked "make normalization-check" in src/common/unicode/,
while on it (works in 13~, and breaks in older stable branches
independently of this commit).
The release notes should just mention this commit for v13~.
Reported-by: Matthijs van der Vleuten
Discussion: https://postgr.es/m/17277-0c527a373794e802@postgresql.org
Backpatch-through: 10
protocol.sgml documented the layout for Type messages, but completely
dropped the ball otherwise, failing to explain what they are, when
they are sent, or what they're good for. While at it, do a little
copy-editing on the description of Relation messages.
In passing, adjust the comment for apply_handle_type() to make it
clearer that we choose not to do anything when receiving a Type
message, not that we think it has no use whatsoever.
Per question from Stefen Hillman.
Discussion: https://postgr.es/m/CAPgW8pMknK5pup6=T4a_UG=Cz80Rgp=KONqJmTdHfaZb0RvnFg@mail.gmail.com
We've seen intermittent failures in this test on slower buildfarm
machines, which I think can be explained by assuming that autovacuum
emitted some additional WAL. Disable autovacuum to stabilize it.
In passing, use stringwise not numeric comparison to compare
WAL file names. Doesn't matter at present, but they are
hex strings not decimal ...
Discussion: https://postgr.es/m/1372189.1636499287@sss.pgh.pa.us
libpq collects up to a bufferload of data whenever it reads data from
the socket. When SSL or GSS encryption is requested during startup,
any additional data received with the server's yes-or-no reply
remained in the buffer, and would be treated as already-decrypted data
once the encryption handshake completed. Thus, a man-in-the-middle
with the ability to inject data into the TCP connection could stuff
some cleartext data into the start of a supposedly encryption-protected
database session.
This could probably be abused to inject faked responses to the
client's first few queries, although other details of libpq's behavior
make that harder than it sounds. A different line of attack is to
exfiltrate the client's password, or other sensitive data that might
be sent early in the session. That has been shown to be possible with
a server vulnerable to CVE-2021-23214.
To fix, throw a protocol-violation error if the internal buffer
is not empty after the encryption handshake.
Our thanks to Jacob Champion for reporting this problem.
Security: CVE-2021-23222
The server collects up to a bufferload of data whenever it reads data
from the client socket. When SSL or GSS encryption is requested
during startup, any additional data received with the initial
request message remained in the buffer, and would be treated as
already-decrypted data once the encryption handshake completed.
Thus, a man-in-the-middle with the ability to inject data into the
TCP connection could stuff some cleartext data into the start of
a supposedly encryption-protected database session.
This could be abused to send faked SQL commands to the server,
although that would only work if the server did not demand any
authentication data. (However, a server relying on SSL certificate
authentication might well not do so.)
To fix, throw a protocol-violation error if the internal buffer
is not empty after the encryption handshake.
Our thanks to Jacob Champion for reporting this problem.
Security: CVE-2021-23214
In v14, because we don't have a field in RestrictInfo to cache both the
left and right type's hash equality operator, we just restrict the scope
of Memoize to only when the left and right types of a RestrictInfo are the
same.
In master we add another field to RestrictInfo and cache both hash
equality operators.
Reported-by: Jaime Casanova
Author: David Rowley
Discussion: https://postgr.es/m/20210929185544.GB24346%40ahch-to
Backpatch-through: 14
Currently, lastOverflowedXid is never reset. It's just adjusted on new
transactions known to be overflowed. But if there are no overflowed
transactions for a long time, snapshots could be mistakenly marked as
suboverflowed due to wraparound.
This commit fixes this issue by resetting lastOverflowedXid when needed
altogether with KnownAssignedXids.
Backpatch to all supported versions.
Reported-by: Stan Hu
Discussion: https://postgr.es/m/CAMBWrQ%3DFp5UAsU_nATY7EMY7NHczG4-DTDU%3DmCvBQZAQ6wa2xQ%40mail.gmail.com
Author: Kyotaro Horiguchi, Alexander Korotkov
Reviewed-by: Stan Hu, Simon Riggs, Nikolay Samokhvalov, Andrey Borodin, Dmitry Dolgov
When calculating distance between float4/float8 values, we need to be a
bit more careful about NaN values in order not to trigger assert. We
consider NaN values to be equal (distace 0.0) and in infinite distance
from all other values.
On builds without asserts, this issue is mostly harmless - the ranges
may be merged in less efficient order, but the index is still correct.
Per report from Andreas Seltenreich. Backpatch to 14, where this new
BRIN opclass was introduced.
Reported-by: Andreas Seltenreich
Discussion: https://postgr.es/m/87r1bw9ukm.fsf@credativ.de
When a role being dropped contains is referenced by catalog objects that
are concurrently also being dropped, a crash can result while trying to
construct the string that describes the objects. Suppress that by
ignoring objects whose descriptions are returned as NULL.
The majority of relevant codesites were already cautious about this
already; we had just missed a couple.
This is an old bug, so backpatch all the way back.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/17126-21887f04508cb5c8@postgresql.org
If lo_export() fails to open the target file or to write to it, it leaks
the created LargeObjectDesc and its snapshot in the top-transaction
context and resource owner. That's pretty harmless, it's a small leak
after all, but it gives the user a "Snapshot reference leak" warning.
Fix by using a short-lived memory context and no resource owner for
transient LargeObjectDescs that are opened and closed within one function
call. The leak is easiest to reproduce with lo_export() on a directory
that doesn't exist, but in principle the other lo_* functions could also
fail.
Backpatch to all supported versions.
Reported-by: Andrew B
Reviewed-by: Alvaro Herrera
Discussion: https://www.postgresql.org/message-id/32bf767a-2d65-71c4-f170-122f416bab7e@iki.fi
Commit b4af70cb inverted the return value of the function
parallel_processing_is_safe(), but missed the amvacuumcleanup test.
Index AMs that don't support parallel cleanup at all were affected.
The practical consequences of this bug were not very serious. Hash
indexes are affected, but since they just return the number of blocks
during hashvacuumcleanup anyway, it can't have had much impact.
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAD21AoA-Em+aeVPmBbL_s1V-ghsJQSxYL-i3JP8nTfPiD1wjKw@mail.gmail.com
Backpatch: 14-, where commit b4af70cb appears.
Commit b4af70cb, which simplified state managed by VACUUM, performed
refactoring of parallel VACUUM in passing. Confusion about the exact
details of the tasks that the leader process is responsible for led to
code that made it possible for parallel VACUUM to miss a subset of the
table's indexes entirely. Specifically, indexes that fell under the
min_parallel_index_scan_size size cutoff were missed. These indexes are
supposed to be vacuumed by the leader (alongside any parallel unsafe
indexes), but weren't vacuumed at all. Affected indexes could easily
end up with duplicate heap TIDs, once heap TIDs were recycled for new
heap tuples. This had generic symptoms that might be seen with almost
any index corruption involving structural inconsistencies between an
index and its table.
To fix, make sure that the parallel VACUUM leader process performs any
required index vacuuming for indexes that happen to be below the size
cutoff. Also document the design of parallel VACUUM with these
below-size-cutoff indexes.
It's unclear how many users might be affected by this bug. There had to
be at least three indexes on the table to hit the bug: a smaller index,
plus at least two additional indexes that themselves exceed the size
cutoff. Cases with just one additional index would not run into
trouble, since the parallel VACUUM cost model requires two
larger-than-cutoff indexes on the table to apply any parallel
processing. Note also that autovacuum was not affected, since it never
uses parallel processing.
Test case based on tests from a larger patch to test parallel VACUUM by
Masahiko Sawada.
Many thanks to Kamigishi Rei for her invaluable help with tracking this
problem down.
Author: Peter Geoghegan <pg@bowt.ie>
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Reported-By: Kamigishi Rei <iijima.yun@koumakan.jp>
Reported-By: Andrew Gierth <andrew@tao11.riddles.org.uk>
Diagnosed-By: Andres Freund <andres@anarazel.de>
Bug: #17245
Discussion: https://postgr.es/m/17245-ddf06aaf85735f36@postgresql.org
Discussion: https://postgr.es/m/20211030023740.qbnsl2xaoh2grq3d@alap3.anarazel.de
Backpatch: 14-, where the refactoring commit appears.
This undoes a mistake in 1ec7679f1: domainval and domainnull were
meant to live across loop iterations, but they were incorrectly
moved inside the loop. The effect was only to emit useless extra
EEOP_MAKE_READONLY steps, so it's not a big deal; nonetheless,
back-patch to v13 where the mistake was introduced.
Ranier Vilela
Discussion: https://postgr.es/m/CAEudQAqXuhbkaAp-sGH6dR6Nsq7v28_0TPexHOm6FiDYqwQD-w@mail.gmail.com
As in commits 6301c3ada and e9d9ba2a4, avoid doing repetitive
list_delete_first() operations, since that would be expensive when
there are many files waiting to be unlinked. This is a slightly
larger change than in those cases. We have to keep the list state
valid for calls to AbsorbSyncRequests(), so it's necessary to invent a
"canceled" field instead of immediately deleting PendingUnlinkEntry
entries. Also, because we might not be able to process all the
entries, we need a new list primitive list_delete_first_n().
list_delete_first_n() is almost list_copy_tail(), but it modifies the
input List instead of making a new copy. I found a couple of existing
uses of the latter that could profitably use the new function. (There
might be more, but the other callers look like they probably shouldn't
overwrite the input List.)
As before, back-patch to v13.
Discussion: https://postgr.es/m/CD2F0E7F-9822-45EC-A411-AE56F14DEA9F@amazon.com
In the same spirit as 6301c3ada, fix some more places where we were
using list_delete_first() in a loop and thereby risking O(N^2)
behavior. It's not clear that the lists manipulated in these spots
can get long enough to be really problematic ... but it's not clear
that they can't, either, and the fixes are simple enough.
As before, back-patch to v13.
Discussion: https://postgr.es/m/CD2F0E7F-9822-45EC-A411-AE56F14DEA9F@amazon.com
Failing to do so results in inability of logical decoding to process the
WAL stream. Handle it by doing nothing.
Backpatch all the way back.
Reported-by: Petr Jelínek <petr.jelinek@enterprisedb.com>
The opclass parameter Datums from the old index are fetched in the same
way as for predicates and expressions, by grabbing them directly from
the system catalogs. They are then copied into the new IndexInfo that
will be used for the creation of the new copy.
This caused the new index to be rebuilt with default parameters rather
than the ones pre-defined by a user. The only way to get back a new
index with correct opclass parameters would be to recreate a new index
from scratch.
The issue has been introduced by 911e702.
Author: Michael Paquier
Reviewed-by: Zhihong Yu
Discussion: https://postgr.es/m/YX0CG/QpLXcPr8HJ@paquier.xyz
Backpatch-through: 13
When replaying a transaction that held many exclusive locks on the
primary, a standby server's startup process would expend O(N^2)
effort on manipulating the list of locks. This code was fine when
written, but commit 1cff1b95a made repetitive list_delete_first()
calls inefficient, as explained in its commit message. Fix by just
iterating the list normally, and releasing storage only when done.
(This'd be inadequate if we needed to recover from an error occurring
partway through; but we don't.)
Back-patch to v13 where 1cff1b95a came in.
Nathan Bossart
Discussion: https://postgr.es/m/CD2F0E7F-9822-45EC-A411-AE56F14DEA9F@amazon.com
Commit d168b66682, which overhauled index deletion, added a
pg_unreachable() to the end of a sort comparator used when sorting heap
TIDs from an index page. This allows the compiler to apply
optimizations that assume that the heap TIDs from the index AM must
always be unique.
That doesn't seem like a good idea now, given recent reports of
corruption involving duplicate TIDs in indexes on Postgres 14. Demote
to an assertion, just in case.
Backpatch: 14-, where index deletion was overhauled.
DST law changes in Fiji, Jordan, Palestine, and Samoa. Historical
corrections for Barbados, Cook Islands, Guyana, Niue, Portugal, and
Tonga.
Also, the Pacific/Enderbury zone has been renamed to Pacific/Kanton.
The following zones have been merged into nearby, more-populous zones
whose clocks have agreed since 1970: Africa/Accra, America/Atikokan,
America/Blanc-Sablon, America/Creston, America/Curacao,
America/Nassau, America/Port_of_Spain, Antarctica/DumontDUrville,
and Antarctica/Syowa.
Commits fdd965d07 and 3cd9c3b92 tested CREATE INDEX CONCURRENTLY by
launching two separate pgbench runs concurrently. This was needed so
that only a single client thread would run CREATE INDEX CONCURRENTLY,
avoiding deadlock between two CICs. However, there's a better way,
which is to use an advisory lock to prevent concurrent CICs. That's
better in part because the test code is shorter and more readable, but
mostly because it automatically scales things to launch an appropriate
number of CICs relative to the number of INSERT transactions.
As committed, typically half to three-quarters of the CIC transactions
were pointless because the INSERT transactions had already stopped.
In passing, remove background_pgbench, which was added to support
these tests and isn't needed anymore. We can always put it back
if we find a use for it later.
Back-patch to v12; older pgbench versions lack the
conditional-execution features needed for this method.
Tom Lane and Andrey Borodin
Discussion: https://postgr.es/m/139687.1635277318@sss.pgh.pa.us
The previous coding relied on the memory for the slots being zeroed
elsewhere, which while it was true in this case is not an contract
which is guaranteed to hold. Explicitly clear the tts_isnull array
to ensure that the slots are filled from a known state.
Backpatch to v14 where the catalog multi-inserts were introduced.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CAJ7c6TP0AowkUgNL6zcAK-s5HYsVHVBRWfu69FRubPpfwZGM9A@mail.gmail.com
Backpatch-through: 14
The purpose of commit 8a54e12a38 was to
fix this, and it sufficed when the PREPARE TRANSACTION completed before
the CIC looked for lock conflicts. Otherwise, things still broke. As
before, in a cluster having used CIC while having enabled prepared
transactions, queries that use the resulting index can silently fail to
find rows. It may be necessary to reindex to recover from past
occurrences; REINDEX CONCURRENTLY suffices. Fix this for future index
builds by making CIC wait for arbitrarily-recent prepared transactions
and for ordinary transactions that may yet PREPARE TRANSACTION. As part
of that, have PREPARE TRANSACTION transfer locks to its dummy PGPROC
before it calls ProcArrayClearTransaction(). Back-patch to 9.6 (all
supported versions).
Andrey Borodin, reviewed (in earlier versions) by Andres Freund.
Discussion: https://postgr.es/m/01824242-AA92-4FE9-9BA7-AEBAFFEA3D0C@yandex-team.ru
CIC and REINDEX CONCURRENTLY assume backends see their catalog changes
no later than each backend's next transaction start. That failed to
hold when a backend absorbed a relevant invalidation in the middle of
running RelationBuildDesc() on the CIC index. Queries that use the
resulting index can silently fail to find rows. Fix this for future
index builds by making RelationBuildDesc() loop until it finishes
without accepting a relevant invalidation. It may be necessary to
reindex to recover from past occurrences; REINDEX CONCURRENTLY suffices.
Back-patch to 9.6 (all supported versions).
Noah Misch and Andrey Borodin, reviewed (in earlier versions) by Andres
Freund.
Discussion: https://postgr.es/m/20210730022548.GA1940096@gust.leadboat.com
The code does not expect sh_error() to return, but the patch
that made this header usable in frontend didn't get that memo.
While here, plaster unlikely() on the tests that decide whether
to invoke sh_error(), and add our standard copyright notice.
Noted by Andres Freund. Back-patch to v13 where this frontend
support came in.
Discussion: https://postgr.es/m/0D54435C-1199-4361-9D74-2FBDCF8EA164@anarazel.de
Non-global default privilege entries should be dumped as-is,
not made relative to the default ACL for their object type.
This would typically only matter if one had revoked some
on-by-default privileges in a global entry, and then wanted
to grant them again in a non-global entry.
Per report from Boris Korzun. This is an old bug, so back-patch
to all supported branches.
Neil Chen, test case by Masahiko Sawada
Discussion: https://postgr.es/m/111621616618184@mail.yandex.ru
Discussion: https://postgr.es/m/CAA3qoJnr2+1dVJObNtfec=qW4Z0nz=A9+r5bZKoTSy5RDjskMw@mail.gmail.com
For non-MSVC builds this is make's $(CURDIR), while for MSVC builds it
is $topdir/$Config/$module. The directory is added as the second element
in the PATH, so that the install location takes precedence, but the
added PATH element takes precedence over the rest of the PATH.
The reason for this is to allow tests to find built products that are
not installed, such as the libpq_pipeline test driver.
The libpq_pipeline test is adjusted to take advantage of this.
Based on a suggestion from Andres Freund.
Backpatch to release 14.
Discussion: https://postgr.es/m/4941f5a5-2d50-1a0e-6701-14c5fefe92d6@dunslane.net
Using for a new database a template database with shared dependencies
that need to be copied over was causing a corruption of pg_shdepend
because of an off-by-one computation error of the index number used for
the values inserted with a slot.
Issue introduced by e3931d0. Monitoring the rest of the code, there are
no similar mistakes.
Reported-by: Sven Klemm
Author: Aleksander Alekseev
Reviewed-by: Daniel Gustafsson, Michael Paquier
Discussion: https://postgr.es/m/CAJ7c6TP0AowkUgNL6zcAK-s5HYsVHVBRWfu69FRubPpfwZGM9A@mail.gmail.com
Backpatch-through: 14
The build scripts of Visual Studio would fail to detect properly a 3.0.0
build as the check on the second digit was failing. This is adjusted
where needed, allowing the builds to complete. Note that the MSIs of
OpenSSL mentioned in the documentation have not changed any library
names for Win32 and Win64, making this change straight-forward.
Reported-by: htalaco, via github
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/YW5XKYkq6k7OtrFq@paquier.xyz
Backpatch-through: 9.6
Commit 1b5d797cd4 intended to relax the lock level used to rename
indexes, but inadvertently allowed *any* relation to be renamed with a
lowered lock level, as long as the command is spelled ALTER INDEX.
That's undesirable for other relation types, so retry the operation with
the higher lock if the relation turns out not to be an index.
After this fix, ALTER INDEX <sometable> RENAME will require access
exclusive lock, which it didn't before.
Author: Nathan Bossart <bossartn@amazon.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reported-by: Onder Kalaci <onderk@microsoft.com>
Discussion: https://postgr.es/m/PH0PR21MB1328189E2821CDEC646F8178D8AE9@PH0PR21MB1328.namprd21.prod.outlook.com
ldapsearch's deprecated -h/-p arguments were removed, need to use -H now -
which has been around for over 20 years.
As perltidy insists on reflowing the parameters anyway, change order and
"phrasing" to yield a less confusing layout (per suggestion from Tom Lane).
Discussion: https://postgr.es/m/20211009233850.wvr6apcrw2ai6cnj@alap3.anarazel.de
Backpatch: 11-, where the tests were added.
An update such as "UPDATE ... SET fld[n].subfld = whatever"
failed if the array elements were domains rather than plain
composites. That's because isAssignmentIndirectionExpr()
failed to cope with the CoerceToDomain node that would appear
in the expression tree in this case. The result would typically
be a crash, and even if we accidentally didn't crash, we'd not
correctly preserve other fields of the same array element.
Per report from Onder Kalaci. Back-patch to v11 where arrays of
domains came in.
Discussion: https://postgr.es/m/PH0PR21MB132823A46AA36F0685B7A29AD8BD9@PH0PR21MB1328.namprd21.prod.outlook.com
I think when I added this assertion (in commit 8f889b108), I was only
thinking of the use of transformExpressionList at top level of INSERT
and VALUES. But it's also called by transformRowExpr(), which can
certainly occur in an UPDATE targetlist, so it's inappropriate to
suppose that p_multiassign_exprs must be empty. Besides, since the
input is not expected to contain ResTargets, there's no reason it
should contain MultiAssignRefs either. Hence this code need not
be concerned about the state of p_multiassign_exprs, and we should
just drop the assertion.
Per bug #17236 from ocean_li_996. It's been wrong for years,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/17236-3210de9bcba1d7ca@postgresql.org
If the blob TOC file cannot be parsed, the error message was failing
to print the filename as the variable holding it was shadowed by the
destination buffer for parsing. When the filename fails to parse,
the error will print an empty string:
./pg_restore -d foo -F d dump
pg_restore: error: invalid line in large object TOC file "": ..
..instead of the intended error message:
./pg_restore -d foo -F d dump
pg_restore: error: invalid line in large object TOC file "dump/blobs.toc": ..
Fix by renaming both variables as the shared name was too generic to
store either and still convey what the variable held.
Backpatch all the way down to 9.6.
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/A2B151F5-B32B-4F2C-BA4A-6870856D9BDE@yesql.se
Backpatch-through: 9.6
Make sure that the string parsing is limited by the size of the
destination buffer.
In pg_basebackup the available values sent from the server
is limited to two characters so there was no risk of overflow.
In pg_dump the buffer is bounded by MAXPGPATH, and thus the limit
must be inserted via preprocessor expansion and the buffer increased
by one to account for the terminator. There is no risk of overflow
here, since in this case, the buffer scanned is smaller than the
destination buffer.
Backpatch the pg_basebackup fix to 11 where it was introduced, and
the pg_dump fix all the way down to 9.6.
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/B14D3D7B-F98C-4E20-9459-C122C67647FB@yesql.se
Backpatch-through: 11 and 9.6
The grammar of this command run on indexes with column names has always
been authorized by the parser, and it has never been documented.
Since 911e702, it is possible to define opclass parameters as of CREATE
INDEX, which actually broke the old case of ALTER INDEX/TABLE where
relation-level parameters n_distinct and n_distinct_inherited could be
defined for an index (see 76a47c0 and its thread where this point has
been touched, still remained unused). Attempting to do that in v13~
would cause the index to become unusable, as there is a new dedicated
code path to load opclass parameters instead of the relation-level ones
previously available. Note that it is possible to fix things with a
manual catalog update to bring the relation back online.
This commit disables this command for now as the use of column names for
indexes does not make sense anyway, particularly when it comes to index
expressions where names are automatically computed. One way to properly
support this case properly in the future would be to use column numbers
when it comes to indexes, in the same way as ALTER INDEX .. ALTER COLUMN
.. SET STATISTICS.
Partitioned indexes were already blocked, but not indexes. Some tests
are added for both cases.
There was some code in ANALYZE to enforce n_distinct to be used for an
index expression if the parameter was defined, but just remove it for
now until/if there is support for this (note that index-level parameters
never had support in pg_dump either, previously), so this was just dead
code.
Reported-by: Matthijs van der Vleuten
Author: Nathan Bossart, Michael Paquier
Reviewed-by: Vik Fearing, Dilip Kumar
Discussion: https://postgr.es/m/17220-15d684c6c2171a83@postgresql.org
Backpatch-through: 13
Failing to do that, any direct inserts/updates of those partitions
would fail to enforce the correct constraint, that is, one that
considers the new partition constraint of their parent table.
Backpatch to 10.
Reported by: Hou Zhijie <houzj.fnst@fujitsu.com>
Author: Amit Langote <amitlangote09@gmail.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Nitin Jadhav <nitinjadhavpostgres@gmail.com>
Reviewed-by: Pavel Borisov <pashkin.elfe@gmail.com>
Discussion: https://postgr.es/m/OS3PR01MB5718DA1C4609A25186D1FBF194089%40OS3PR01MB5718.jpnprd01.prod.outlook.com
During a replication slot creation, an ERROR generated in the same
transaction as the one creating a to-be-exported snapshot would have
left the backend in an inconsistent state, as the associated static
export snapshot state was not being reset on transaction abort, but only
on the follow-up command received by the WAL sender that created this
snapshot on replication slot creation. This would trigger inconsistency
failures if this session tried to export again a snapshot, like during
the creation of a replication slot.
Note that a snapshot export cannot happen in a transaction block, so
there is no need to worry resetting this state for subtransaction
aborts. Also, this inconsistent state would very unlikely show up to
users. For example, one case where this could happen is an
out-of-memory error when building the initial snapshot to-be-exported.
Dilip found this problem while poking at a different patch, that caused
an error in this code path for reasons unrelated to HEAD.
Author: Dilip Kumar
Reviewed-by: Michael Paquier, Zhihong Yu
Discussion: https://postgr.es/m/CAFiTN-s0zA1Kj0ozGHwkYkHwa5U0zUE94RSc_g81WrpcETB5=w@mail.gmail.com
Backpatch-through: 9.6
It was clearly the intent to do so all along, but the original coding
fat-fingered this by checking the wrong array element. We fixed it
in passing in 403a3d91c, but that later got reverted, and we forgot
to keep this bug fix.
Most of the time this'd be relatively harmless, since once we lock
any of the partitioned table's leaf partitions, that would suffice
to prevent major DDL on the partitioned table itself. However, a
childless partitioned table would get dumped with no relevant lock
whatsoever, possibly allowing dump failure or inconsistent output.
Unlike 403a3d91c, there are no versioning concerns, since every server
version that has partitioned tables will allow you to lock one.
Back-patch to v10 where partitioned tables were introduced.
Discussion: https://postgr.es/m/1018205.1634346327@sss.pgh.pa.us
An extension may want to call GetSecurityLabel() on a shared object
before the shared relcaches are fully initialized. For instance, a
ClientAuthentication_hook might want to retrieve the security label on
a role.
Discussion: https://postgr.es/m/ecb7af0b26e3be1d96d291c8453a86f1f82d9061.camel@j-davis.com
Backpatch-through: 9.6
If a function-in-FROM laterally references the output of some sub-SELECT
earlier in the FROM clause, and we are able to flatten that sub-SELECT
into the outer query, the expression(s) copied into the function RTE
missed being processed by eval_const_expressions. This'd lead to trouble
and probable crashes at execution if such expressions contained
named-argument function call syntax or functions with defaulted arguments.
The bug is masked if the query contains any explicit JOIN syntax, which
may help explain why we'd not noticed.
Per bug #17227 from Bernd Dorn. This is an oversight in commit 7266d0997,
so back-patch to v13 where that came in.
Discussion: https://postgr.es/m/17227-5a28ed1512189fa4@postgresql.org
The test code added with ff9f111bce fails under valgrind, and probably
other slow cases too, because if (say) autovacuum runs in between and
produces WAL of its own, the large INSERT fails to account for that in
the LSN calculations. Rewrite to use a DO loop.
Per complaint from Andres Freund
Backpatch to all branches.
Discussion: https://postgr.es/m/20211013180338.5guyqzpkcisqugrl@alap3.anarazel.de
Avoid calling contrib/amcheck functions with relations that are
unsuitable for checking. Specifically, don't attempt verification of
temporary relations, or indexes whose pg_index entry indicates that the
index is invalid, or not ready.
These relations are not supported by any of the contrib/amcheck
functions, for reasons that are pretty fundamental. For example, the
implementation of REINDEX CONCURRENTLY can add its own "transient"
pg_index entries, which has rather unclear implications for the B-Tree
verification functions, at least in the general case -- so they just
treat it as an error. It falls to the amcheck caller (in this case
pg_amcheck) to deal with the situation at a higher level.
pg_amcheck now simply treats these conditions as additional "visibility
concerns" when it queries system catalogs. This is a little arbitrary.
It seems to have the least problems among any of the available
alternatives.
Author: Mark Dilger <mark.dilger@enterprisedb.com>
Reported-By: Alexander Lakhin <exclusion@gmail.com>
Reviewed-By: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Bug: #17212
Discussion: https://postgr.es/m/17212-34dd4a1d6bba98bf@postgresql.org
Backpatch: 14-, where pg_amcheck was introduced.
The code was freeing the name of the multirange type function stored in
the parse tree but it should not do that. Event triggers could for
example look at such a corrupted parsed tree with a ddl_command_end
event.
Author: Alex Kozhemyakin, Sergey Shinderuk
Reviewed-by: Peter Eisentraut, Michael Paquier
Discussion: https://postgr.es/m/d5042d46-b9cd-6efb-219a-71ed0cf45bc8@postgrespro.ru
Backpatch-through: 14
This fixes a set of issues that cause different breakages or annoyances
when using pg_upgrade's test.sh to do upgrades across different major
versions:
- test.sh is completely broken when using v14 as new version because of
the removal of testtablespace/ as Makefile rule. Older versions of
pg_regress don't support --make-tablespacedir, blocking the creation of
the tablespace. In order to fix that, it is simple enough to create
those directories in the script itself, but only do that when an old
version is involved. This fix is needed on HEAD and REL_14_STABLE.
- The script would fail when using PG <= v11 as old version because of
WITH OIDS relations not supported in v12. In order to fix this, this
steals a method from the buildfarm that uses a DO block to change all
the relations marked as WITH OIDS, allowing pg_upgrade to pass. This is
more portable than using ALTER TABLE queries on the relations causing
issues. This is fixed down to v12, and authored originally by Andrew
Dunstan.
- Not using --extra-float-digits=0 with v11 as old version causes
a lot of diffs in the dumps, making the whole unreadable. This gets
only done when using v11 as old version. This is fixed down to v12.
The buildfarm code uses that already.
Note that the addition of --wal-segsize and --allow-group-access breaks
the script when using v10 or older at initdb time as these got added in
11. 10 would be EOL'd next year and nobody has complained about those
problems yet, so nothing is done about that. This means that this
commit fixes upgrade tests using test.sh with v11 as minimum older
version, up to HEAD, and that it is enough to apply this change down to
12. The old and new dumps still generate diffs, still require manual
checks, and more could be done to reduce the noise, but this allows the
tests to run with a rather minimal amount of them.
I have tested this commit and test.sh with v11 as minimum across all the
branches where this is applied. Note that this commit has no impact on
the normal pg_upgrade test run with a simple "make check".
Author: Justin Pryzby, Andrew Dunstan, Michael Paquier
Discussion: https://postgr.es/m/20201206180248.GI24052@telsasoft.com
Backpatch-through: 12
Incrementing the level of the call stack reported is useful for
debugging purposes as it allows to control which part of the test is
exactly failing, especially if a test is structured with subroutines
that call routines from Test::More.
This adds more incrementations of $Test::Builder::Level where debugging
gets improved (for example it does not make sense for some paths like
pg_rewind where long subroutines are used).
A note is added to src/test/perl/README about that, based on a
suggestion from Andrew Dunstan and a wording coming from both of us.
Usage of Test::Builder::Level has spread in 12, so a backpatch down to
this version is done.
Reviewed-by: Andrew Dunstan, Peter Eisentraut, Daniel Gustafsson
Discussion: https://postgr.es/m/YV1CCFwgM1RV1LeS@paquier.xyz
Backpatch-through: 12
Previously when pg_log_backend_memory_contexts() sent the request to
the autovacuum launcher, it could take more than several seconds to
log its memory contexts. Because the function (HandleAutoVacLauncherInterrupts)
to process any new interrupts that autovacuum launcher received
didn't handle the request for logging of memory contexts. This commit changes
the function so that it handles the request, to make autovacuum launcher
more responsitve to pg_log_backend_memory_contexts().
Back-patch to v14 where pg_log_backend_memory_contexts() was added.
Author: Koyu Tanigawa
Reviewed-by: Bharath Rupireddy, Atsushi Torikoshi
Discussion: https://postgr.es/m/0aae3e074face409b35153451be5cc11@oss.nttdata.com
Commit 3f50b8263 had an oversight: formerly, to deparse expressions
attached to a plan node, it was only necessary to update the
deparse_namespace ancestors list alongside calling set_deparse_plan.
Now it's necessary to update the ancestors list *first*, because
set_deparse_plan consults it, and one call site got that wrong.
This error was masked in most cases because explain.c uses just one
List object for the ancestors list, updating it in-place as the plan
is scanned, so that we accidentally had the right List assigned to
dpns->ancestors before it was needed. It would fail only if a
WorkTableScan node were the first one that we tried to deparse a
subexpression of.
Per report from Markus Winand. Like the previous patch,
back-patch to v14.
Discussion: https://postgr.es/m/648B0505-AA57-42C2-A2DA-E551DE46FA15@winand.at
This fixes a loss of precision that occurs when the first input is
very close to 1, so that its logarithm is very small.
Formerly, during the initial low-precision calculation to estimate the
result weight, the logarithm was computed to a local rscale that was
capped to NUMERIC_MAX_DISPLAY_SCALE (1000). However, the base may be
as close as 1e-16383 to 1, hence its logarithm may be as small as
1e-16383, and so the local rscale needs to be allowed to exceed 16383,
otherwise all precision is lost, leading to a poor choice of rscale
for the full-precision calculation.
Fix this by removing the cap on the local rscale during the initial
low-precision calculation, as we already do in the full-precision
calculation. This doesn't change the fact that the initial calculation
is a low-precision approximation, computing the logarithm to around 8
significant digits, which is very fast, especially when the base is
very close to 1.
Patch by me, reviewed by Alvaro Herrera.
Discussion: https://postgr.es/m/CAEZATCV-Ceu%2BHpRMf416yUe4KKFv%3DtdgXQAe5-7S9tD%3D5E-T1g%40mail.gmail.com
3c5b0685b9 used setFilePointer() to set the position of the filehandle, but
passed the wrong filehandle, always leaving the position at 0. Instead of just
fixing that, remove use of setFilePointer(), we have a perl fd at this point,
so we can just use perl's seek().
Additionally, the perl filehandle wasn't closed, just the windows filehandle.
Reviewed-By: Andrew Dunstan <andrew@dunslane.net>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20211003173038.64mmhgxctfqn7wl6@alap3.anarazel.de
Backpatch: 9.6-, like 3c5b0685b9
Per discussion, let's just follow CLDR's default zone mappings
faithfully. There are two changes here that are clear improvements:
* Mapping "Greenwich Standard Time" to Atlantic/Reykjavik is actually
a better fit than using London, because Iceland hasn't observed DST
since 1968, so this is more nearly what people might expect.
* Since the "Samoa" zone is specified to be UTC+13:00, we must map
it to Pacific/Apia not Pacific/Samoa; the latter refers to American
Samoa which is now on the other side of the date line.
The rest of these changes look like they're choosing the most populous
IANA zone as representative. Whatever the details, we're just going
to say "if you don't like this mapping, complain to CLDR".
Discussion: https://postgr.es/m/3266414.1633045628@sss.pgh.pa.us
Some specific logic is done at the end of recovery when involving 2PC
transactions:
1) Call RecoverPreparedTransactions(), to recover the state of 2PC
transactions into memory (re-acquire locks, etc.).
2) ShutdownRecoveryTransactionEnvironment(), to move back to normal
operations, mainly cleaning up recovery locks and KnownAssignedXids
(including any 2PC transaction tracked previously).
3) Switch XLogCtl->SharedRecoveryState to RECOVERY_STATE_DONE, which is
the tipping point for any process calling RecoveryInProgress() to check
if the cluster is still in recovery or not.
Any snapshot taken between steps 2) and 3) would be empty, causing any
transaction relying on a snapshot at this point to potentially corrupt
data as there could still be some 2PC transactions to track, with
RecentXmin moving backwards on successive calls to GetSnapshotData() in
the same transaction.
As SharedRecoveryState is the point to take into account to know if it
is safe to discard KnownAssignedXids, this commit moves step 2) after
step 3), so as we can never finish with empty snapshots.
This exists since the introduction of hot standby, so backpatch all the
way down. The window with incorrect snapshots is extremely small, but I
have seen it when running 023_pitr_prepared_xact.pl, as did buildfarm
member fairywren. Thomas Munro also found it independently. Special
thanks to Andres Freund for taking the time to analyze this issue.
Reported-by: Thomas Munro, Michael Paquier
Analyzed-by: Andres Freund
Discussion: https://postgr.es/m/20210422203603.fdnh3fu2mmfp2iov@alap3.anarazel.de
Backpatch-through: 9.6
Prior to v14, we insisted that the query in RETURN QUERY be of a type
that returns tuples. (For instance, INSERT RETURNING was allowed,
but not plain INSERT.) That happened indirectly because we opened a
cursor for the query, so spi.c checked SPI_is_cursor_plan(). As a
consequence, the error message wasn't terribly on-point, but at least
it was there.
Commit 2f48ede08 lost this detail. Instead, plain RETURN QUERY
insisted that the query be a SELECT (by checking for SPI_OK_SELECT)
while RETURN QUERY EXECUTE failed to check the query type at all.
Neither of these changes was intended.
The only convenient place to check this in the EXECUTE case is inside
_SPI_execute_plan, because we haven't done parse analysis until then.
So we need to pass down a flag saying whether to enforce that the
query returns tuples. Fortunately, we can squeeze another boolean
into struct SPIExecuteOptions without an ABI break, since there's
padding space there. (It's unlikely that any extensions would
already be using this new struct, but preserving ABI in v14 seems
like a smart idea anyway.)
Within spi.c, it seemed like _SPI_execute_plan's parameter list
was already ridiculously long, and I didn't want to make it longer.
So I thought of passing SPIExecuteOptions down as-is, allowing that
parameter list to become much shorter. This makes the patch a bit
more invasive than it might otherwise be, but it's all internal to
spi.c, so that seems fine.
Per report from Marc Bachmann. Back-patch to v14 where the
faulty code came in.
Discussion: https://postgr.es/m/1F2F75F0-27DF-406F-848D-8B50C7EEF06A@gmail.com
This corrects a bunch of entries in win32_tzmap[], and adds a few
new ones, based on the CLDR project's windowsZones.xml file.
Non-cosmetic changes fall into four main categories:
* Flat-out errors:
US/Aleutan doesn't exist
America/Salvador doesn't exist
Asia/Baku is wrong for Yerevan
Asia/Dhaka (Bangladesh) is wrong for Astana (Kazakhstan)
Europe/Bucharest is wrong for Chisinau
America/Mexico_City is wrong for Chetumal
America/Buenos_Aires is wrong for Cayenne
America/Caracas has its own zone, so poor fit for La Paz
US/Eastern is wrong for Haiti
US/Eastern is wrong for Indiana (East)
Asia/Karachi is wrong for Tashkent
Etc/UTC+12 doesn't exist
Signs of Etc/GMT zones were backwards
* Judgment calls:
(These changes follow CLDR's choices, except for the first one)
Use Europe/London for "Greenwich Standard Time", since that seems much
more likely than Africa/Casablanca to be what people will think that
zone name means. CLDR has Atlantic/Reykjavik here, but that's no better.
Asia/Shanghai seems a better fit than Hong Kong for "China Standard
Time".
Europe/Sarajevo is now a link to Belgrade, ie "Central Europe Standard
Time"; so use Warsaw for "Central European Standard Time".
America/Sao_Paulo seems more representative than Araguaina for
"E. South America Standard Time".
Africa/Johannesburg seems more representative than Harare for
"South Africa Standard Time".
* New Windows zone names:
"Israel Standard Time"
"Kaliningrad Standard Time"
"Russia Time Zone N" for various N
"Singapore Standard Time"
"South Sudan Standard Time"
"W. Central Africa Standard Time"
"West Bank Standard Time"
"Yukon Standard Time"
Some of these replace older spellings, but I kept the older spellings
too in case our code runs on a machine with the older data.
* Replace aliases (tzdb Links) with underlying city-named zones:
(This tracks tzdb's longstanding practice, and reduces inconsistency
with the rest of the entries, as well as with CLDR.)
US/Alaska
Asia/Kuwait
Asia/Muscat
Canada/Atlantic
Australia/Canberra
Canada/Saskatchewan
US/Central
US/Eastern
US/Hawaii
US/Mountain
Canada/Newfoundland
US/Pacific
Back-patch to all supported branches, as is our usual practice for
time zone data updates.
Discussion: https://postgr.es/m/3266414.1633045628@sss.pgh.pa.us
The original intent seems to have been to sort case-insensitively
by the Windows zone name, but various changes over the years did
not get that memo. This commit just moves a few entries to
restore exact alphabetic order, to ease comparison to the outputs
of processing scripts.
Back-patch to all supported branches, as is our usual practice for
time zone data updates.
Discussion: https://postgr.es/m/3266414.1633045628@sss.pgh.pa.us
The previous approach didn't really work on windows, due to the PATH separator
being ';' not ':'. Instead of making the PATH change more complicated,
reference the binary using the TESTDIR environment.
Reported-By: Andres Freund <andres@anarazel.de>
Suggested-By: Andrew Dunstan <andrew@dunslane.net>
Discussion: https://postgr.es/m/20210930214040.odkdd42vknvzifm6@alap3.anarazel.de
Backpatch: 14-, where the test was introduced.
Commit ff9f111bce added some test code that's unportable and doesn't
add meaningful coverage. Remove it rather than try and get it to work
everywhere.
While at it, fix a typo in a log message added by the aforementioned
commit.
Backpatch to 14.
Discussion: https://postgr.es/m/3000074.1632947632@sss.pgh.pa.us
The intermittent h buffer was not freed, causing it to leak. Backpatch
through 14 where HMAC was refactored to the current API.
Author: Sergey Shinderuk <s.shinderuk@postgrespro.ru>
Discussion: https://postgr.es/m/af07e620-7e28-a742-4637-2bc44aa7c2be@postgrespro.ru
Backpatch-through: 14
get_variable_range() would incautiously believe that statistics
containing only an MCV list are sufficient to derive a range estimate.
That's okay for an enum-like column that contains only MCVs, but
otherwise the estimate could be pretty bad. Make it report that the
range is indeterminate unless the MCVs plus nullfrac account for
the whole table.
I don't think this needs a dedicated test case, since a quick code
coverage check verifies that the existing regression tests traverse
all the alternatives. There is room to doubt that a future-proof
test case could be built anyway, given that the submitted example
accidentally doesn't fail before v11.
Per bug #17207 from Simon Perepelitsa. Back-patch to v10.
In principle this has been broken all along, but I'm hesitant to
make such changes in 9.6, since if anyone is unhappy with 9.6.24's
behavior there will be no second chance to fix it.
Discussion: https://postgr.es/m/17207-5265aefa79e333b4@postgresql.org
Commit 84f5c2908 forgot to consider the possibility that
EnsurePortalSnapshotExists could run inside a subtransaction with
lifespan shorter than the Portal's. In that case, the new active
snapshot would be popped at the end of the subtransaction, leaving
a dangling pointer in the Portal, with mayhem ensuing.
To fix, make sure the ActiveSnapshot stack entry is marked with
the same subtransaction nesting level as the associated Portal.
It's certainly safe to do so since we won't be here at all unless
the stack is empty; hence we can't create an out-of-order stack.
Let's also apply this logic in the case where PortalRunUtility
sets portalSnapshot, just to be sure that path can't cause similar
problems. It's slightly less clear that that path can't create
an out-of-order stack, so add an assertion guarding it.
Report and patch by Bertrand Drouvot (with kibitzing by me).
Back-patch to v11, like the previous commit.
Discussion: https://postgr.es/m/ff82b8c5-77f4-3fe7-6028-fcf3303e82dd@amazon.com
Computing related timestamps by subtracting "N days" is sensitive
to the prevailing timezone, since we interpret that as "same local
time on the N'th prior day". Even though the intervals in question
are only two to four days, through remarkable bad luck they managed
to cross the end of Ramadan in 2014, causing the test's output to
change if timezone is set to Africa/Casablanca. (Maybe in other
Muslim areas as well; I didn't check.) There's absolutely no reason
for this test to exercise interval subtraction, so just get rid of
that and use plain timestamptz constants representing the intended
values.
Per report from Andres Freund. Back-patch to v10 where this test
script came in.
Discussion: https://postgr.es/m/20210930183641.7lh4jhvpipvromca@alap3.anarazel.de
First, as pointed out by Tom Lane and Michael Paquier, I failed to
realize that Windows' PostgresNode needs an extra pg_hba.conf line
(added by PostgresNode->set_replication_conf, called internally by
->init() when 'allows_streaming=>1' is given -- but I purposefully
omitted that). I think a good fix should be to have nodes with only
'has_archiving=>1' set up for replication too, but that's a bigger
discussion. Fix it by calling ->set_replication_conf, which is not
unprecedented, as pointed out by Andrew Dunstan.
I also forgot to uncomment a ->finish() call for a pumpable IPC::Run
file descriptor. Apparently this is innocuous in almost all platforms.
Backpatch to 14. The older branches were added this file too, but not
this particular part of the test.
Discussion: https://postgr.es/m/3000074.1632947632@sss.pgh.pa.us
Discussion: https://postgr.es/m/YVT7qwhR8JmC2kfz@paquier.xyz
Physical replication always ships WAL segment files to replicas once
they are complete. This is a problem if one WAL record is split across
a segment boundary and the primary server crashes before writing down
the segment with the next portion of the WAL record: WAL writing after
crash recovery would happily resume at the point where the broken record
started, overwriting that record ... but any standby or backup may have
already received a copy of that segment, and they are not rewinding.
This causes standbys to stop following the primary after the latter
crashes:
LOG: invalid contrecord length 7262 at A8/D9FFFBC8
because the standby is still trying to read the continuation record
(contrecord) for the original long WAL record, but it is not there and
it will never be. A workaround is to stop the replica, delete the WAL
file, and restart it -- at which point a fresh copy is brought over from
the primary. But that's pretty labor intensive, and I bet many users
would just give up and re-clone the standby instead.
A fix for this problem was already attempted in commit 515e3d84a0, but
it only addressed the case for the scenario of WAL archiving, so
streaming replication would still be a problem (as well as other things
such as taking a filesystem-level backup while the server is down after
having crashed), and it had performance scalability problems too; so it
had to be reverted.
This commit fixes the problem using an approach suggested by Andres
Freund, whereby the initial portion(s) of the split-up WAL record are
kept, and a special type of WAL record is written where the contrecord
was lost, so that WAL replay in the replica knows to skip the broken
parts. With this approach, we can continue to stream/archive segment
files as soon as they are complete, and replay of the broken records
will proceed across the crash point without a hitch.
Because a new type of WAL record is added, users should be careful to
upgrade standbys first, primaries later. Otherwise they risk the standby
being unable to start if the primary happens to write such a record.
A new TAP test that exercises this is added, but the portability of it
is yet to be seen.
This has been wrong since the introduction of physical replication, so
backpatch all the way back. In stable branches, keep the new
XLogReaderState members at the end of the struct, to avoid an ABI
break.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Nathan Bossart <bossartn@amazon.com>
Discussion: https://postgr.es/m/202108232252.dh7uxf6oxwcy@alvherre.pgsql
Previously socket errors such as invalid socket or socket wait method failures
during benchmark caused pgbench to exit with status 0. Instead, errors during
the run should result in exit status 2.
Back-patch to v12 where pgbench started reporting exit status.
Original complaint and patch by Hayato Kuroda.
Author: Yugo Nagata, Fabien COELHO
Reviewed-by: Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/TYCPR01MB5870057375ACA8A73099C649F5349@TYCPR01MB5870.jpnprd01.prod.outlook.com
The failure of socket wait method like "select()" doesn't terminate pgbench.
So the log level of error message when that failure happens should be ERROR.
But previously FATAL was used in that case.
Back-patch to v13 where pgbench started using common logging API.
Author: Yugo Nagata, Fabien COELHO
Reviewed-by: Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/20210617005934.8bd37bf72efd5f1b38e6f482@sraoss.co.jp
The code inconsistently used "statistic object" or "statistics" where
the correct term, as discussed, is actually "statistics object". This
improves the state of the code to be more consistent.
While on it, fix an incorrect error message introduced in a4d75c8. This
error should never happen, as the code states, but it would be
misleading.
Author: Justin Pryzby
Reviewed-by: Álvaro Herrera, Michael Paquier
Discussion: https://postgr.es/m/20210924215827.GS831@telsasoft.com
Backpatch-through: 14
That allows to include just visibilitymapdefs.h from file.c, and in turn,
remove include of postgres.h from relcache.h.
Reported-by: Andres Freund
Discussion: https://postgr.es/m/20210913232614.czafiubr435l6egi%40alap3.anarazel.de
Author: Alexander Korotkov
Reviewed-by: Andres Freund, Tom Lane, Alvaro Herrera
Backpatch-through: 13
Calculating degree of a functional dependency may allocate a lot of
memory - we have released mot of the explicitly allocated memory, but
e.g. detoasted varlena values were left behind. That may be an issue,
because we consider a lot of dependencies (all combinations), and the
detoasting may happen for each one again.
Fixed by calling dependency_degree() in a dedicated context, and
resetting it after each call. We only need the calculated dependency
degree, so we don't need to copy anything.
Backpatch to PostgreSQL 10, where extended statistics were introduced.
Backpatch-through: 10
Discussion: https://www.postgresql.org/message-id/20210915200928.GP831%40telsasoft.com
Until now, all extended statistics on a given relation were built in the
same memory context, without resetting. Some of the memory was released
explicitly, but not all of it - for example memory allocated while
detoasting values is hard to free. This is how it worked since extended
statistics were introduced in PostgreSQL 10, but adding support for
extended stats on expressions made the issue somewhat worse as it
increases the number of statistics to build.
Fixed by adding a memory context which gets reset after building each
statistics object (all the statistics kinds included in it). Resetting
it after building each statistics kind would be even better, but it
would require more invasive changes and copying of results, making it
harder to backpatch.
Backpatch to PostgreSQL 10, where extended statistics were introduced.
Author: Justin Pryzby
Reported-by: Justin Pryzby
Reviewed-by: Tomas Vondra
Backpatch-through: 10
Discussion: https://www.postgresql.org/message-id/20210915200928.GP831%40telsasoft.com
Updates/Deletes on a partition were allowed even without replica identity
after the parent table was added to a publication. This would later lead
to an error on subscribers. The reason was that we were not invalidating
the partition's relcache and the publication information for partitions
was not getting rebuilt. Similarly, we were not invalidating the
partitions' relcache after dropping a partitioned table from a publication
which will prohibit Updates/Deletes on its partition without replica
identity even without any publication.
Reported-by: Haiying Tang
Author: Hou Zhijie and Vignesh C
Reviewed-by: Vignesh C and Amit Kapila
Backpatch-through: 13
Discussion: https://postgr.es/m/OS0PR01MB6113D77F583C922F1CEAA1C3FBD29@OS0PR01MB6113.jpnprd01.prod.outlook.com
It is not appropriate for deduplication to apply single value strategy
when triggered by a bottom-up index deletion pass. This wastes cycles
because later bottom-up deletion passes will overinterpret older
duplicate tuples that deduplication actually just skipped over "by
design". It also makes bottom-up deletion much less effective for low
cardinality indexes that happen to cross a meaningless "index has single
key value per leaf page" threshold.
To fix, slightly narrow the conditions under which deduplication's
single value strategy is considered. We already avoided the strategy
for a unique index, since our high level goal must just be to buy time
for VACUUM to run (not to buy space). We'll now also avoid it when we
just had a bottom-up pass that reported failure. The two cases share
the same high level goal, and already overlapped significantly, so this
approach is quite natural.
Oversight in commit d168b666, which added bottom-up index deletion.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-WznaOvM+Gyj-JQ0X=JxoMDxctDTYjiEuETdAGbF5EUc3MA@mail.gmail.com
Backpatch: 14-, where bottom-up deletion was introduced.
Contrary to the output of native perl, Msys perl generates outputs with
CRLFs characters. There are already places in the TAP code where CRLFs
(\r\n) are automatically converted to LF (\n) on Msys, but we missed a
couple of places when running commands and using their output for
comparison, that would lead to failures.
This problem has been found thanks to the test added in 5adb067 using
TestLib::command_checks_all(), but after a closer look more code paths
were missing a filter.
This is backpatched all the way down to prevent any surprises if a new
test is introduced in stable branches.
Reviewed-by: Andrew Dunstan, Álvaro Herrera
Discussion: https://postgr.es/m/1252480.1631829409@sss.pgh.pa.us
Backpatch-through: 9.6
Before commit 84f5c2908, a STABLE function in a plpgsql CALL
statement's argument list would see an up-to-date snapshot,
because exec_stmt_call would push a new snapshot. I got rid of
that because the possibility of the snapshot disappearing within
COMMIT made it too hard to manage a snapshot across the CALL
statement. That's fine so far as the procedure itself goes,
but I forgot to think about the possibility of STABLE functions
within the CALL argument list. As things now stand, those'll
be executed with the Portal's snapshot as ActiveSnapshot,
keeping them from seeing updates more recent than Portal startup.
(VOLATILE functions don't have a problem because they take their
own snapshots; which indeed is also why the procedure itself
doesn't have a problem. There are no STABLE procedures.)
We can fix this by pushing a new snapshot transiently within
ExecuteCallStmt itself. Popping the snapshot before we get
into the procedure proper eliminates the management problem.
The possibly-useless extra snapshot-grab is slightly annoying,
but it's no worse than what happened before 84f5c2908.
Per bug #17199 from Alexander Nawratil. Back-patch to v11,
like the previous patch.
Discussion: https://postgr.es/m/17199-1ab2561f0d94af92@postgresql.org
I noticed that commit 0bead9af48 left this flag undocumented in
XLogSetRecordFlags, which led me to discover that the flag doesn't
actually do what the one comment on it said it does. Improve the
situation by adding some more comments.
Backpatch to 14, where the aforementioned commit appears.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/202109212119.c3nhfp64t2ql@alvherre.pgsql
A broken HOT chain is not an unexpected condition, even when the offset
number points past the end of the page's line pointer array.
heap_prune_chain() does not (and never has) treated this condition as
unexpected, so derivative code in heap_index_delete_tuples() shouldn't
do so either.
Oversight in commit 4228817449.
The assertion can probably only fail on Postgres 14 and master. Earlier
releases don't have commit 3c3b8a4b, which taught VACUUM to truncate the
line pointer array of heap pages. Backpatch all the same, just to be
consistent.
Author: Peter Geoghegan <pg@bowt.ie>
Reported-By: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/17197-9438f31f46705182@postgresql.org
Backpatch: 12-, just like commit 4228817449.
Since introduction of extended statistics, we've disallowed references
to system columns. So for example
CREATE STATISTICS s ON ctid FROM t;
would fail. But with extended statistics on expressions, it was possible
to work around this limitation quite easily
CREATE STATISTICS s ON (ctid::text) FROM t;
This is an oversight in a4d75c86bf, fixed by adding a simple check.
Backpatch to PostgreSQL 14, where support for extended statistics on
expressions was introduced.
Backpatch-through: 14
Discussion: https://postgr.es/m/20210816013255.GS10479%40telsasoft.com
Commit 55dc86eca changed pull_varnos to use (if possible) the associated
ph_eval_at for a PlaceHolderVar. I missed a fine point though: we might
be looking at a PHV in the quals or tlist of a child appendrel, in which
case we need to compute a ph_eval_at value that's been translated in the
same way that the PHV itself has been (cf. adjust_appendrel_attrs).
Fortunately, enough info is available in the PlaceHolderInfo to make
such translation possible without additional outside data, so we don't
need another round of uglification of planner APIs. This is a little
bit complicated, but since it's a hard-to-hit corner case, I'm not much
worried about adding cycles here.
Per report from Jaime Casanova. Back-patch to v12, like the previous
commit.
Discussion: https://postgr.es/m/20210915230959.GB17635@ahch-to
The rewriter transformation for SEARCH BREADTH FIRST produces a
FieldSelect on a Var of type RECORD, where the Var references the
recursive union's worktable output. EXPLAIN VERBOSE failed to handle
this case, because it only expected such Vars to appear in CteScans
not WorkTableScans. Fix that, and add some test cases exercising
EXPLAIN on SEARCH and CYCLE queries.
In principle this oversight is an old bug, but it seems that the
case is unreachable without SEARCH BREADTH FIRST, because the
parser fails when attempting to create such a reference manually.
So for today I'll just patch HEAD/v14. Someday we might find that
the code portion of this patch needs to be back-patched further.
Per report from Atsushi Torikoshi.
Discussion: https://postgr.es/m/5bafa66ad529e11860339565c9e7c166@oss.nttdata.com
Session statistics, as introduced by 960869da08, had several shortcomings:
- an additional GetCurrentTimestamp() call that also impaired the accuracy of
the data collected
This can be avoided by passing the current timestamp we already have in
pgstat_report_stat().
- an additional statistics UDP packet sent every 500ms
This is solved by adding the new statistics to PgStat_MsgTabstat.
This is conceptually ugly, because session statistics are not
table statistics. But the struct already contains data unrelated
to tables, so there is not much damage done.
Connection and disconnection are reported in separate messages, which
reduces the number of additional messages to two messages per session and a
slight increase in PgStat_MsgTabstat size (but the same number of table
stats fit).
- Session time computation could overflow on systems where long is 32 bit.
Reported-By: Andres Freund <andres@anarazel.de>
Author: Andres Freund <andres@anarazel.de>
Author: Laurenz Albe <laurenz.albe@cybertec.at>
Discussion: https://postgr.es/m/20210801205501.nyxzxoelqoo4x2qc%40alap3.anarazel.de
Backpatch: 14-, where the feature was introduced.
ProcArrayGroupClearXid function has a parameter named "proc",
but the same name was used for its local variables. This commit fixes
this variable shadowing, to improve code readability.
Back-patch to all supported versions, to make future back-patching
easy though this patch is classified as refactoring only.
Reported-by: Ranier Vilela
Author: Ranier Vilela, Aleksander Alekseev
https://postgr.es/m/CAEudQAqyoTZC670xWi6w-Oe2_Bk1bfu2JzXz6xRfiOUzm7xbyQ@mail.gmail.com
All size_t variables declared in procarray.c are actually int ones.
Let's use int instead of size_t for those variables. Which would
reduce Wsign-compare compiler warnings.
Back-patch to v14 where commit 941697c3c1 added size_t variables
in procarray.c, to make future back-patching easy though
this patch is classified as refactoring only.
Reported-by: Ranier Vilela
Author: Ranier Vilela, Aleksander Alekseev
https://postgr.es/m/CAEudQAqyoTZC670xWi6w-Oe2_Bk1bfu2JzXz6xRfiOUzm7xbyQ@mail.gmail.com
It's possible to execute user-defined SQL in some background processes;
for example, logical replication workers can fire triggers. This opens
the possibility that someone would try to execute LISTEN in such a
context. But since only regular backends ever call
ProcessNotifyInterrupt, no messages would actually be received, and
thus the registered listener would simply prevent the message queue
from being cleaned. Eventually NOTIFY would stop working, which is bad.
Perhaps someday somebody will invent infrastructure to make listening
in a background worker actually useful. In the meantime, forbid it.
Back-patch to v13, which is where we introduced the MyBackendType
variable. It'd be a lot harder to implement the check without that,
and it doesn't seem worth the trouble.
Discussion: https://postgr.es/m/153243441449.1404.2274116228506175596@wrigleys.postgresql.org
Formerly, we sent signals for outgoing NOTIFY messages within
ProcessCompletedNotifies, which was also responsible for sending
relevant ones of those messages to our connected client. It therefore
had to run during the main-loop processing that occurs just before
going idle. This arrangement had two big disadvantages:
* Now that procedures allow intra-command COMMITs, it would be
useful to send NOTIFYs to other sessions immediately at COMMIT
(though, for reasons of wire-protocol stability, we still shouldn't
forward them to our client until end of command).
* Background processes such as replication workers would not send
NOTIFYs at all, since they never execute the client communication
loop. We've had requests to allow triggers running in replication
workers to send NOTIFYs, so that's a problem.
To fix these things, move transmission of outgoing NOTIFY signals
into AtCommit_Notify, where it will happen during CommitTransaction.
Also move the possible call of asyncQueueAdvanceTail there, to
ensure we don't bloat the async SLRU if a background worker sends
many NOTIFYs with no one listening.
We can also drop the call of asyncQueueReadAllNotifications,
allowing ProcessCompletedNotifies to go away entirely. That's
because commit 790026972 added a call of ProcessNotifyInterrupt
adjacent to PostgresMain's call of ProcessCompletedNotifies,
and that does its own call of asyncQueueReadAllNotifications,
meaning that we were uselessly doing two such calls (inside two
separate transactions) whenever inbound notify signals coincided
with an outbound notify. We need only set notifyInterruptPending
to ensure that ProcessNotifyInterrupt runs, and we're done.
The existing documentation suggests that custom background workers
should call ProcessCompletedNotifies if they want to send NOTIFY
messages. To avoid an ABI break in the back branches, reduce it
to an empty routine rather than removing it entirely. Removal
will occur in v15.
Although the problems mentioned above have existed for awhile,
I don't feel comfortable back-patching this any further than v13.
There was quite a bit of churn in adjacent code between 12 and 13.
At minimum we'd have to also backpatch 51004c717, and a good deal
of other adjustment would also be needed, so the benefit-to-risk
ratio doesn't look attractive.
Per bug #15293 from Michael Powers (and similar gripes from others).
Artur Zakirov and Tom Lane
Discussion: https://postgr.es/m/153243441449.1404.2274116228506175596@wrigleys.postgresql.org
It's possible for us to copy an AlternativeSubPlan expression node
into multiple places, for example the scan quals of several
partition children. Then it's possible that we choose a different
one of the alternatives as optimal in each place. Commit 41efb8340
failed to consider this scenario, so its attempt to remove "unused"
subplans could remove subplans that were still used elsewhere.
Fix by delaying the removal logic until we've examined all the
AlternativeSubPlans in a given query level. (This does assume that
AlternativeSubPlans couldn't get copied to other query levels, but
for the foreseeable future that's fine; cf qual_is_pushdown_safe.)
Per report from Rajkumar Raghuwanshi. Back-patch to v14
where the faulty logic came in.
Discussion: https://postgr.es/m/CAKcux6==O3NNZC3bZ2prRYv3cjm3_Zw1GfzmOjEVqYN4jub2+Q@mail.gmail.com
If an allocation failed within LLVM it is not safe to call back into LLVM as
LLVM is not generally safe against exceptions / stack-unwinding. Thus errors
while in LLVM code are promoted to FATAL. However llvm_shutdown() did call
back into LLVM even in such cases, while llvm_release_context() was careful
not to do so.
We cannot generally skip shutting down LLVM, as that can break profiling. But
it's OK to do so if there was an error from within LLVM.
Reported-By: Jelte Fennema <Jelte.Fennema@microsoft.com>
Author: Andres Freund <andres@anarazel.de>
Author: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/AM5PR83MB0178C52CCA0A8DEA0207DC14F7FF9@AM5PR83MB0178.EURPRD83.prod.outlook.com
Backpatch: 11-, where jit was introduced
In d9d8aa9bb9 I added a defensive NULL assignment to protect against a
not-too-smart compiler warning about unitialized variable use after the
switch. Unfortunately I only did so on master and forgot to adjust that for
14.
Stephen noticed that there actually is a compiler warning :(.
Reported-By: Stephen Frost <sfrost@snowman.net>
Discussion: https://postgr.es/m/20210827224639.GX17906@tamriel.snowman.net
Commits ffa2e4670 and 52a10224e caused libpq's connection-establishment
functions to usually leave a nonempty string in the connection's
errorMessage buffer, even after a successful connection. While that
was intentional on my part, more sober reflection says that it wasn't
a great idea: the string would be a bit confusing. Also this broke at
least one application that checked for connection success by examining
the errorMessage, instead of using PQstatus() as documented. Let's
clear the buffer at success exit, restoring the pre-v14 behavior.
Discussion: https://postgr.es/m/4170264.1620321747@sss.pgh.pa.us
Ordinarily, using EXIT this way would draw "control reached end of
function without RETURN". However, if the function is one where we
don't require an explicit RETURN (such as a DO block), that should
not happen. It did anyway, because add_dummy_return() neglected to
account for the case.
Per report from Herwig Goemans. Back-patch to all supported branches.
Discussion: https://postgr.es/m/868ae948-e3ca-c7ec-95a6-83cfc08ef750@gmail.com
While processing toast changes in logical decoding, we rejigger the
tuple change to point to in-memory toast tuples instead to on-disk toast
tuples. And, to make sure the memory accounting is correct, we were
subtracting the old change size and then after re-computing the new tuple,
re-adding its size at the end. Now, if there is any error before we add
the new size, we will release the changes and that will update the
accounting info (subtracting the size from the counters). And we were
underflowing there which leads to an assertion failure in assert enabled
builds and wrong memory accounting in reorder buffer otherwise.
Author: Bertrand Drouvot
Reviewed-by: Amit Kapila
Backpatch-through: 13, where memory accounting was introduced
Discussion: https://postgr.es/m/92b0ee65-b8bd-e42d-c082-4f3f4bf12d34@amazon.com
An out-of-memory failure happening when allocating the structures to
store the connection parameter keywords and values would mess up with
the set of connections saved, as on failure the pthread mutex would
still be hold with the new connection object listed but free()'d.
Rather than just unlocking the mutex, which would leave the static list
of connections into an inconsistent state, move the allocation for the
structures of the connection parameters before beginning the test
manipulation. This ensures that the list of connections and the
connection mutex remain consistent all the time in this code path.
This error is unlikely going to happen, but this could mess up badly
with ECPG clients in surprising ways, so backpatch all the way down.
Reported-by: ryancaicse
Discussion: https://postgr.es/m/17186-b4cfd8f0eb4d1dee@postgresql.org
Backpatch-through: 9.6
If search_start is greater than the length of the string, we should just
return REG_NOMATCH immediately. (Note that the equality case should
*not* be rejected, since the pattern might be able to match zero
characters.) This guards various internal assumptions that the min of a
range of string positions is not more than the max. Violation of those
assumptions could allow an attempt to fetch string[search_start-1],
possibly causing a crash.
Jaime Casanova pointed out that this situation is reachable with the
new regexp_xxx functions that accept a user-specified start position.
I don't believe it's reachable via any in-core call site in v14 and
below. However, extensions could possibly call pg_regexec with an
out-of-range search_start, so let's back-patch the fix anyway.
Discussion: https://postgr.es/m/20210911180357.GA6870@ahch-to
We have long forbidden fetching backwards from a NO SCROLL cursor,
but the prohibition didn't extend to cases in which we rewind the
query altogether and then re-fetch forwards. I think the reason is
that this logic was mainly meant to protect plan nodes that can't
be run in the reverse direction. However, re-reading the query output
is problematic if the query is volatile (which includes SELECT FOR
UPDATE, not just queries with volatile functions): the re-read can
produce different results, which confuses the cursor navigation logic
completely. Another reason for disliking this approach is that some
code paths will either fetch backwards or rewind-and-fetch-forwards
depending on the distance to the target row; so that seemingly
identical use-cases may or may not draw the "cursor can only scan
forward" error. Hence, let's clean things up by disallowing rewind
as well as fetch-backwards in a NO SCROLL cursor.
Ordinarily we'd only make such a definitional change in HEAD, but
there is a third reason to consider this change now. Commit ba2c6d6ce
created some new user-visible anomalies for non-scrollable cursors
WITH HOLD, in that navigation in the cursor result got confused if the
cursor had been partially read before committing. The only good way
to resolve those anomalies is to forbid rewinding such a cursor, which
allows removal of the incorrect cursor state manipulations that
ba2c6d6ce added to PersistHoldablePortal.
To minimize the behavioral change in the back branches (including
v14), refuse to rewind a NO SCROLL cursor only when it has a holdStore,
ie has been held over from a previous transaction due to WITH HOLD.
This should avoid breaking most applications that have been sloppy
about whether to declare cursors as scrollable. We'll enforce the
prohibition across-the-board beginning in v15.
Back-patch to v11, as ba2c6d6ce was.
Discussion: https://postgr.es/m/3712911.1631207435@sss.pgh.pa.us
Some plan node types don't react well to being called again after
they've already returned NULL. PortalRunSelect() has long dealt
with this by calling the executor with NoMovementScanDirection
if it sees that we've already run the portal to the end. However,
commit ba2c6d6ce overlooked this point, so that persisting an
already-fully-fetched cursor would fail if it had such a plan.
Per report from Tomas Barton. Back-patch to v11, as the faulty
commit was. (I've omitted a test case because the type of plan
that causes a problem isn't all that stable.)
Discussion: https://postgr.es/m/CAPV2KRjd=ErgVGbvO2Ty20tKTEZZr6cYsYLxgN_W3eAo9pf5sw@mail.gmail.com
When throttling is used, transactions that lag behind schedule by
more than the latency limit are counted and reported as skipped.
Previously, there was the case where pgbench counted all skipped
transactions even if the timer specified in -T option was exceeded.
This could take a very long time to do that especially when unrealistically
high rate setting in -R option caused quite a lot of transactions that
lagged behind schedule. This could prevent pgbench from ending
immediately, and so pgbench could look like it got stuck to users.
To fix the issue, this commit changes pgbench so that it stops counting
skipped transactions as soon as the timer is exceeded. The timer can
make pgbench end soon even when there are lots of skipped transactions
that have not been counted yet.
Note that there is no guarantee that all skipped transactions are
counted under -T though there is under -t. This is OK in practice
because it's very unlikely to happen with realistic setting. Also this is
not the issue that this commit newly introdues. There used to be
the case where pgbench ended without counting all skipped
transactions since before.
Back-patch to v14. Per discussion, we decided not to bother
back-patch to the stable branches because it's hard to imagine
the issue happens in practice (with realistic setting).
Author: Yugo Nagata, Fabien COELHO
Reviewed-by: Greg Sabino Mullane, Fujii Masao
Discussion: https://postgr.es/m/20210613040151.265ff59d832f835bbcf8b3ba@sraoss.co.jp
We don't allow relations to exceed 2^32-1 blocks, because block
numbers are 32 bits and the last possible block number is reserved
to mean InvalidBlockNumber. There is a check for this in mdextend,
but that's really way too late, because the smgr API requires us to
create a buffer for the block-to-be-added, and we do not want to
have any buffer with blocknum InvalidBlockNumber. (Such a case
can trigger assertions in bufmgr.c, plus I think it might confuse
ReadBuffer's logic for data-past-EOF later on.) So put the check
into ReadBuffer.
Per report from Christoph Berg. It's been like this forever,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/YTn1iTkUYBZfcODk@msg.credativ.de
Previously, walreceiver always closed the currently-opened WAL segment
and created its archive notification file, after it finished writing
the current segment up and received any WAL data that should be
written into the next segment. If walreceiver exited just before
any WAL data in the next segment arrived at standby, it did not
create the archive notification file of the current segment
even though that's known completed. This behavior could cause
WAL archiving of the segment to be delayed until subsequent
restartpoints or checkpoints created its notification file.
To fix the issue, this commit changes walreceiver so that it creates
an archive notification file of a current WAL segment immediately
if that's known completed before receiving next WAL data.
Back-patch to all supported branches.
Reported-by: Kyotaro Horiguchi
Author: Fujii Masao
Reviewed-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/20200630.165503.1465894182551545886.horikyota.ntt@gmail.com
Coverity complained that one caller of getFormattedTypeName() failed
to free the returned string. Which is true, but rather than fixing
that one, let's get rid of this tedious and error-prone requirement.
Now that getFormattedTypeName() caches its result, strdup'ing that
result and expecting the caller to free it accomplishes little except
to waste cycles. We do create a leak in the case where getTypes didn't
make a TypeInfo for the type, but that basically shouldn't ever happen.
Back-patch, as commit 6c450a861 was. This isn't a particularly
interesting bug fix, but the API change seems like a hazard for
future back-patching activity if we don't back-patch it.
If we copy data-modifying CTEs from the original query to a replacement
query (from a DO INSTEAD rule), we must set hasModifyingCTE properly
in the replacement query. Failure to do this can cause various
unpleasantness, such as unsafe usage of parallel plans. The code also
neglected to propagate hasRecursive, though that's only cosmetic at
the moment.
A difficulty arises if the rule action is an INSERT...SELECT. We
attach the original query's RTEs and CTEs to the sub-SELECT Query, but
data-modifying CTEs are only allowed to appear in the topmost Query.
For the moment, throw an error in such cases. It would probably be
possible to avoid this error by attaching the CTEs to the top INSERT
Query instead; but that would require a bunch of new code to adjust
ctelevelsup references. Given the narrowness of the use-case, and
the need to back-patch this fix, it does not seem worth the trouble
for now. We can revisit this if we get field complaints.
Per report from Greg Nancarrow. Back-patch to all supported branches.
(The test case added here does not fail before v10, but there are
plenty of places checking top-level hasModifyingCTE in 9.6, so I have
no doubt that this code change is necessary there too.)
Greg Nancarrow and Tom Lane
Discussion: https://postgr.es/m/CAJcOf-f68DT=26YAMz_i0+Au3TcLO5oiHY5=fL6Sfuits6r+_w@mail.gmail.com
Discussion: https://postgr.es/m/CAJcOf-fAdj=nDKMsRhQzndm-O13NY4dL6xGcEvdX5Xvbbi0V7g@mail.gmail.com
Commit 01e658fa74 added hash support for row types. This also added
support for hashing anonymous record types, using the same approach
that the type cache uses for comparison support for record types: It
just reports that it works, but it might fail at run time if a
component type doesn't actually support the operation. We get away
with that for comparison because most types support that. But some
types don't support hashing, so the current state can result in
failures at run time where the planner chooses hashing over sorting,
whereas that previously worked if only sorting was an option.
We do, however, want the record hashing support for path tracking in
recursive unions, and the SEARCH and CYCLE clauses built on that. In
that case, hashing is the only plan option. So enable that, this
commit implements the following approach: The type cache does not
report that hashing is available for the record type. This undoes
that part of 01e658fa74. Instead, callers that require hashing no
matter what can override that result themselves. This patch only
touches the callers to make the aforementioned recursive query cases
work, namely the parse analysis of unions, as well as the hash_array()
function.
Reported-by: Sait Talha Nisanci <sait.nisanci@microsoft.com>
Bug: #17158
Discussion: https://www.postgresql.org/message-id/flat/17158-8a2ba823982537a4%40postgresql.org
Updates/Deletes on a relation were allowed even without replica identity
after we define the publication for all tables. This would later lead to
an error on subscribers. The reason was that for such publications we were
not invalidating the relcache and the publication information for
relations was not getting rebuilt. Similarly, we were not invalidating the
relcache after dropping of such publications which will prohibit
Updates/Deletes without replica identity even without any publication.
Author: Vignesh C and Hou Zhijie
Reviewed-by: Hou Zhijie, Kyotaro Horiguchi, Amit Kapila
Backpatch-through: 10, where it was introduced
Discussion: https://postgr.es/m/CALDaNm0pF6zeWqCA8TCe2sDuwFAy8fCqba=nHampCKag-qLixg@mail.gmail.com
We make each AIX shared library export all globals found in .o files
that originate in the library. That doesn't include symbols acquired by
-lpgcommon_shlib. That is good on average, but it became a problem for
libpq when commit e6afa8918c moved five
official libpq API symbols into src/common. Fix this by implementing
the SHLIB_EXPORTS mechanism for AIX, so affected libraries export the
same symbols that they export on Linux. This reintroduces symbols
pg_encoding_to_char, pg_utf_mblen, pg_char_to_encoding,
pg_valid_server_encoding, and pg_valid_server_encoding_id. Back-patch
to v13, where the aforementioned commit first appeared. While a minor
release is usually the wrong time to add or remove symbol exports in
libpq or libecpg, we should expect users to want each documented symbol.
Tony Reix
Discussion: https://postgr.es/m/PR3PR02MB6396742E2FC3E77D37A920BC86C79@PR3PR02MB6396.eurprd02.prod.outlook.com
timetz_zone() delivered completely wrong answers if the zone was
specified by a dynamic TZ abbreviation, because it failed to account
for the difference between the POSIX conventions for field values in
struct pg_tm and the conventions used in PG-specific datetime code.
As a stopgap fix, just adjust the tm_year and tm_mon fields to match
PG conventions. This is fixed in a different way in HEAD (388e71af8)
but I don't want to back-patch the change of reference point.
Discussion: https://postgr.es/m/CAJ7c6TOMG8zSNEZtCn5SPe+cCk3Lfxb71ZaQwT2F4T7PJ_t=KA@mail.gmail.com
Attempting to make hashfloat4() look as much as possible like
hashfloat8(), I'd figured I could replace NaNs with get_float4_nan()
before widening to float8. However, results from protosciurus
and topminnow show that on some platforms that produces a different
bit-pattern from get_float8_nan(), breaking the intent of ce773f230.
Rearrange so that we use the result of get_float8_nan() for all NaN
cases. As before, back-patch.
Replace fixed-length command buffers with psprintf() calls. We didn't
have anything as convenient as psprintf() when this code was written,
but now that we do, there's little reason for the limitation to
stand. Removing it eliminates some corner cases where (for example)
starting the postmaster with a whole lot of options fails.
Most individual file names that pg_ctl deals with are still restricted
to MAXPGPATH, but we've seldom had complaints about that limitation
so long as it only applies to one filename.
Back-patch to all supported branches.
Phil Krylov
Discussion: https://postgr.es/m/567e199c6b97ee19deee600311515b86@krylov.eu
Previously this was allowed, but the collation effectively vanished
into the ether because of the way lookup_collation() works: you could
not use the collation, nor even drop it. Seems better to give an
error up front than to leave the user wondering why it doesn't work.
(Because this test is in DefineCollation not CreateCollation, it does
not prevent pg_import_system_collations from creating ICU collations,
regardless of the initially-chosen encoding.)
Per bug #17170 from Andrew Bille. Back-patch to v10 where ICU support
was added.
Discussion: https://postgr.es/m/17170-95845cf3f0a9c36d@postgresql.org
543f36b43d was too hasty in thinking that the volatility of date_bin()
had to match date_trunc(), since only the latter references
session_timezone.
Bump catversion
Per feedback from Aleksander Alekseev
Backpatch to v14, as the former commit was
Modern POSIX seems to require strtod() to accept "-NaN", but there's
nothing about NaN in SUSv2, and some of our oldest buildfarm members
don't like it. Let's try writing it as -'NaN' instead; that seems
to produce the same result, at least on Intel hardware.
Per buildfarm.
We had a complaint that the postmaster fails to start if the invoking
program closes stdin. That happens because count_usable_fds expects
to be able to dup(0), and if it can't, we conclude there are no free
FDs and go belly-up. So far as I can find, though, there is no other
place in the server that touches stdin, and it's not unreasonable to
expect that a daemon wouldn't use that file.
As a simple improvement, let's dup FD 2 (stderr) instead. Unlike stdin,
it *is* reasonable for us to expect that stderr be open; even if we are
configured not to touch it, common libraries such as libc might try to
write error messages there.
Per gripe from Mario Emmenlauer. Given the lack of previous complaints,
I'm not excited about pushing this into stable branches, but it seems
OK to squeeze it into v14.
Discussion: https://postgr.es/m/48bafc63-c30f-3962-2ded-f2e985d93e86@emmenlauer.de
The IEEE 754 standard allows a wide variety of bit patterns for NaNs,
of which at least two ("NaN" and "-NaN") are pretty easy to produce
from SQL on most machines. This is problematic because our btree
comparison functions deem all NaNs to be equal, but our float hash
functions know nothing about NaNs and will happily produce varying
hash codes for them. That causes unexpected results from queries
that hash a column containing different NaN values. It could also
produce unexpected lookup failures when using a hash index on a
float column, i.e. "WHERE x = 'NaN'" will not find all the rows
it should.
To fix, special-case NaN in the float hash functions, not too much
unlike the existing special case that forces zero and minus zero
to hash the same. I arranged for the most vanilla sort of NaN
(that coming from the C99 NAN constant) to still have the same
hash code as before, to reduce the risk to existing hash indexes.
I dithered about whether to back-patch this into stable branches,
but ultimately decided to do so. It's a clear improvement for
queries that hash internally. If there is anybody who has -NaN
in a hash index, they'd be well advised to re-index after applying
this patch ... but the misbehavior if they don't will not be much
worse than the misbehavior they had before.
Per bug #17172 from Ma Liangzhu.
Discussion: https://postgr.es/m/17172-7505bea9e04e230f@postgresql.org
Until now, when defining extended statistics, everything except a plain
column reference was treated as complex expression. So for example "a"
was a column reference, but "(a)" would be an expression. In most cases
this does not matter much, but there were a couple strange consequences.
For example
CREATE STATISTICS s ON a FROM t;
would fail, because extended stats require at least two columns. But
CREATE STATISTICS s ON (a) FROM t;
would succeed, because that requirement does not apply to expressions.
Moreover, that statistics object is useless - the optimizer will always
use the regular statistics collected for attribute "a".
So do a bit more work to identify those expressions referencing a single
column, and translate them to a simple column reference. Backpatch to
14, where support for extended statistics on expressions was introduced.
Reported-by: Justin Pryzby
Backpatch-through: 14
Discussion: https://postgr.es/m/20210816013255.GS10479%40telsasoft.com
When -C/--connect option is specified, pgbench establishes and closes
the connection for each transaction. In this case pgbench needs to
measure the times taken for all those connections and disconnections,
to include the average connection time in the benchmark result.
But previously pgbench could not measure those disconnection delays.
To fix the bug, this commit makes pgbench measure the disconnection
delays whenever the connection is closed at the end of transaction,
if -C/--connect option is specified.
Back-patch to v14. Per discussion, we concluded not to back-patch to v13
or before because changing that behavior in stable branches would
surprise users rather than providing benefits.
Author: Yugo Nagata
Reviewed-by: Fabien COELHO, Tatsuo Ishii, Asif Rehman, Fujii Masao
Discussion: https://postgr.es/m/20210614151155.a393bc7d8fed183e38c9f52a@sraoss.co.jp
The check to test whether the subscription workers were restarting after a
change in the subscription was failing. The reason was that the test was
assuming the walsender started before it reaches the 'streaming' state and
the walsender was exiting due to an error before that. Now, the walsender
was erroring out before reaching the 'streaming' state because it tries to
acquire the slot before the previous walsender has exited.
In passing, improve the die messages so that it is easier to investigate
the failures in the future if any.
Reported-by: Michael Paquier, as per buildfarm
Author: Ajin Cherian
Reviewed-by: Masahiko Sawada, Amit Kapila
Backpatch-through: 10, where this test was introduced
Discussion: https://postgr.es/m/YRnhFxa9bo73wfpV@paquier.xyz
It doesn't make any sense to report this information, since VACUUM
VERBOSE reports on heap relation truncation directly. This was an
oversight in commit 7ab96cf6, which made VACUUM VERBOSE output a little
more consistent with nearby autovacuum-specific log output. Adjust
comments that describe how this is supposed to work in passing.
Also bring truncation-related VACUUM VERBOSE output in line with the
convention established for VACUUM VERBOSE output by commit f4f4a649.
Author: Peter Geoghegan <pg@bowt.ie>
Backpatch: 14-, where VACUUM VERBOSE's output changed.
The code printing expressions for extended statistics doubled the
parens, producing results like ((a+1)), which is unnecessary and not
consistent with how we print expressions elsewhere.
Fixed by tweaking the code to produce just a single set of parens.
Reported by Mark Dilger, fix by me. Backpatch to 14, where support for
extended statistics on expressions was added.
Reported-by: Mark Dilger
Discussion: https://postgr.es/m/20210122040101.GF27167%40telsasoft.com
For no particularly good reason, getPolicies() queried pg_policy
separately for each table. We can collect all the policies in
a single query instead, and attach them to the correct TableInfo
objects using findTableByOid() lookups. On the regression
database, this reduces the number of queries substantially, and
provides a visible savings even when running against a local
server.
Per complaint from Hubert Depesz Lubaczewski. Since this is such
a simple fix and can have a visible performance benefit, back-patch
to all supported branches.
Discussion: https://postgr.es/m/20210826084430.GA26282@depesz.com
There's long been a "TODO: there might be some value in caching
the results" annotation on pg_dump's getFormattedTypeName function;
but we hadn't gotten around to checking what it was costing us to
repetitively look up type names. It turns out that when dumping the
current regression database, about 10% of the total number of queries
issued are duplicative format_type() queries. However, Hubert Depesz
Lubaczewski reported a not-unusual case where these account for over
half of the queries issued by pg_dump. Individually these queries
aren't expensive, but when network lag is a factor, they add up to a
problem. We can very easily add some caching to getFormattedTypeName
to solve it.
Since this is such a simple fix and can have a visible performance
benefit, back-patch to all supported branches.
Discussion: https://postgr.es/m/20210826084430.GA26282@depesz.com
Commit 5be8ce82e8 added a new role to the stats_ext regression suite,
but the role name did not start with regress_ causing failures when
running with ENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS. Fixed by
renaming the role to start with the expected regress_ prefix.
Backpatch-through: 10, same as the new regression test
Discussion: https://postgr.es/m/1F238937-7CC2-4703-A1B1-6DC225B8978A%40enterprisedb.com
When an ownership check on extended statistics object failed, the code
was calling aclcheck_error_type to report the failure, which is clearly
wrong, resulting in cache lookup errors. Fix by calling aclcheck_error.
This issue exists since the introduction of extended statistics, so
backpatch all the way back to PostgreSQL 10. It went unnoticed because
there were no tests triggering the error, so add one.
Reported-by: Mark Dilger
Backpatch-through: 10, where extended stats were introduced
Discussion: https://postgr.es/m/1F238937-7CC2-4703-A1B1-6DC225B8978A%40enterprisedb.com
When starting to use a query parsetree loaded from the catalogs,
we must begin by applying AcquireRewriteLocks(), to obtain the same
relation locks that the parser would have gotten if the query were
entered interactively, and to do some other cleanup such as dealing
with later-dropped columns. New-style SQL functions are just as
subject to this rule as other stored parsetrees; however, of the
places dealing with such functions, only init_sql_fcache had gotten
the memo. In particular, if we successfully inlined a new-style
set-returning SQL function that contained any relation references,
we'd either get an assertion failure or attempt to use those
relation(s) sans locks.
I also added AcquireRewriteLocks calls to fmgr_sql_validator and
print_function_sqlbody. Desultory experiments didn't demonstrate any
failures in those, but I suspect that I just didn't try hard enough.
Certainly we don't expect nearby code paths to operate without locks.
On the same logic of it-ought-to-have-the-same-effects-as-the-old-code,
call pg_rewrite_query() in fmgr_sql_validator, too. It's possible
that neither code path there needs to bother with rewriting, but
doing the analysis to prove that is beyond my goals for today.
Per bug #17161 from Alexander Lakhin.
Discussion: https://postgr.es/m/17161-048a1cdff8422800@postgresql.org
Most data-corruption reports mention the location of the problem, but
this one failed to. Add it.
Backpatch all the way back. In 12 and older, also assign the
ERRCODE_DATA_CORRUPTED error code as was done in commit fd6ec93bf8 for
13 and later.
Discussion: https://postgr.es/m/202108191637.oqyzrdtnheir@alvherre.pgsql
Per our message style guidelines, for human consumption we quote
qualified names as a whole rather than each part separately; but commits
bc085205c8 introduced a deviation for extended statistics and
a4d75c86bf copied it. I don't agree with this policy applying to
names shown by psql, but that's a poor reason to deviate from the
practice only in two obscure corners, so make said corners use the same
style as everywhere else.
Backpatch to 14. The first of these is older, but I'm not sure we want
to destabilize the psql output in the older branches for such a small
thing.
Discussion: https://postgr.es/m/20210828181618.GS26465@telsasoft.com
Commit 547f04e734 changed pgbench so that it used the measurement result
of connection delays in its benchmark report only when -C/--connect option
is specified. But previously those delays were unnecessarily measured
even when that option is not specified. Which was a waste of cycles.
This commit improves pgbench so that it avoids such unnecessary measurement.
Back-patch to v14 where commit 547f04e734 first appeared.
Author: Yugo Nagata
Reviewed-by: Fabien COELHO, Asif Rehman, Fujii Masao
Discussion: https://postgr.es/m/20210614151155.a393bc7d8fed183e38c9f52a@sraoss.co.jp
In the long-going saga for analyze on partitioned tables, one thing I
missed while reverting 0827e8af70 is the maintenance of analyze count
and last analyze time for partitioned tables. This is a mostly trivial
change that enables users assess the need for invoking manual ANALYZE on
partitioned tables.
This patch, posted by Justin and modified a bit by me (Álvaro), can be
mostly traced back to Hosoya-san, though any problems introduced with
the scissors are mine.
Backpatch to 14, in line with 6f8127b739.
Co-authored-by: Yuzuko Hosoya <yuzukohosoya@gmail.com>
Co-authored-by: Justin Pryzby <pryzby@telsasoft.com>
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reported-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/20210816222810.GE10479@telsasoft.com
Déjà vu of commit fc40ba1296, for another backslash command.
Strictly speaking this isn't a bug, but since all references to catalog
objects are schema-qualified, we might as well be consistent. The
omission first appeared in commit ad600bba04 and replicated in
a4d75c86bf15; backpatch to 14.
Author: Justin Pryzby <pryzbyj@telsasoft.com>
Discussion: https://postgr.es/m/20210827193151.GN26465@telsasoft.com
Strictly speaking this isn't a bug, but since all references to catalog
objects are schema-qualified, we might as well be consistent. The
omission first appeared in commit 1c5d9270e3, so backpatch to 12.
Author: Justin Pryzby <pryzbyj@telsasoft.com>
Discussion: https://postgr.es/m/20210827193151.GN26465@telsasoft.com
If the system crashed between CREATE TABLESPACE and the next checkpoint,
the result could be some files in the tablespace unexpectedly containing
no rows. Affected files would be those for which the system did not
write WAL; see the wal_skip_threshold documentation. Before v13, a
different set of conditions governed the writing of WAL; see v12's
<sect2 id="populate-pitr">. (The v12 conditions were broader in some
ways and narrower in others.) Users may want to audit non-default
tablespaces for unexpected short files. The bug could have truncated an
index without affecting the associated table, and reindexing the index
would fix that particular problem.
This fixes the bug by making create_tablespace_directories() more like
TablespaceCreateDbspace(). create_tablespace_directories() was
recursively removing tablespace contents, reasoning that WAL redo would
recreate everything removed that way. That assumption holds for other
wal_level values. Under wal_level=minimal, the old approach could
delete files for which no other copy existed. Back-patch to 9.6 (all
supported versions).
Reviewed by Robert Haas and Prabhat Sahu. Reported by Robert Haas.
Discussion: https://postgr.es/m/CA+TgmoaLO9ncuwvr2nN-J4VEP5XyAcy=zKiHxQzBbFRxxGxm0w@mail.gmail.com
Somehow, spgist overlooked the need to call pgstat_count_index_scan().
Hence, pg_stat_all_indexes.idx_scan and equivalent columns never
became nonzero for an SP-GiST index, although the related per-tuple
counters worked fine.
This fix works a bit differently from other index AMs, in that the
counter increment occurs in spgrescan not spggettuple/spggetbitmap.
It looks like this won't make the user-visible semantics noticeably
different, so I won't go to the trouble of introducing an is-this-
the-first-call flag just to make the counter bumps happen in the
same places.
Per bug #17163 from Christian Quest. Back-patch to all supported
versions.
Discussion: https://postgr.es/m/17163-b8c5cc88322a5e92@postgresql.org
When prefetching pages for ANALYZE, we should be using
maintenance_io_concurrenty (by calling
get_tablespace_maintenance_io_concurrency(), not
get_tablespace_io_concurrency()).
ANALYZE prefetching was introduced in c6fc50c, so back-patch to 14.
Backpatch-through: 14
Reported-By: Egor Rogov
Discussion: https://postgr.es/m/9beada99-34ce-8c95-fadb-451768d08c64%40postgrespro.ru
Adjust track_io_timing related logging code added by commit 94d13d474d.
Make it consistent with other nearby autovacuum and autoanalyze logging
code by removing logic that suppressed zero millisecond outputs.
log_autovacuum_min_duration log output now reliably shows "read:" and
"write:" millisecond-based values in its report (when track_io_timing is
enabled).
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Stephen Frost <sfrost@snowman.net>
Discussion: https://postgr.es/m/CAH2-WznW0FNxSVQMSRazAMYNfZ6DR_gr5WE78hc6E1CBkkJpzw@mail.gmail.com
Backpatch: 14-, where the track_io_timing logging was introduced.
This order seems more natural. It starts with details that are
particular to heap and index data structures, and ends with system-level
costs incurred during the autovacuum worker's VACUUM/ANALYZE operation.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-WzkzxK6ahA9xxsOftRtBX_R0swuHZsvo4QUbak1Bz7hb7Q@mail.gmail.com
Backpatch: 14-, which enhanced the log output in various ways.
Second thoughts about commit 824bf7190: we apply makesearch() to
an NFA after having determined whether it is a MATCHALL pattern.
Prepending ".*" doesn't make it non-MATCHALL, but it does change the
maximum possible match length, and makesearch() failed to update that.
This has no ill effects given the stylized usage of search NFAs, but
it seems like it's better to keep the data structure consistent. In
particular, fixing this allows more honest handling of the MATCHALL
check in matchuntil(): we can now assert that maxmatchall is infinity,
instead of lamely assuming that it should act that way.
In passing, improve the code in dump[c]nfa so that infinite maxmatchall
is printed as "inf" not a magic number.
Pengchengliu reported an assertion failure in a parallel woker while
performing a parallel scan using an overflowed snapshot. The proximate
cause is that TransactionXmin was set to an incorrect value. The
underlying cause is incorrect snapshot handling in parallel.c.
In particular, InitializeParallelDSM() was unconditionally calling
GetTransactionSnapshot(), because I (rhaas) mistakenly thought that
was always retrieving an existing snapshot whereas, at isolation
levels less than REPEATABLE READ, it's actually taking a new one. So
instead do this only at higher isolation levels where there actually
is a single snapshot for the whole transaction.
By itself, this is not a sufficient fix, because we still need to
guarantee that TransactionXmin gets set properly in the workers. The
easiest way to do that seems to be to install the leader's active
snapshot as the transaction snapshot if the leader did not serialize a
transaction snapshot. This doesn't affect the results of future
GetTrasnactionSnapshot() calls since those have to take a new snapshot
anyway; what we care about is the side effect of setting TransactionXmin.
Report by Pengchengliu. Patch by Greg Nancarrow, except for some comment
text which I supplied.
Discussion: https://postgr.es/m/002f01d748ac$eaa781a0$bff684e0$@tju.edu.cn
Commit 325f2ec555 introduced pg_class.relwrite to skip operations on
tables created as part of a heap rewrite during DDL. It links such
transient heaps to the original relation OID via this new field in
pg_class but forgot to do anything about toast tables. So, logical
decoding was not able to skip operations on internally created toast
tables. This leads to an error when we tried to decode the WAL for the
next operation for which it appeared that there is a toast data where
actually it didn't have any toast data.
To fix this, we set pg_class.relwrite for internally created toast tables
as well which allowed skipping operations on them during logical decoding.
Author: Bertrand Drouvot
Reviewed-by: David Zhang, Amit Kapila
Backpatch-through: 11, where it was introduced
Discussion: https://postgr.es/m/b5146fb1-ad9e-7d6e-f980-98ed68744a7c@amazon.com
This commit improves the ecpg's error message that commit f576de1db1 updated,
so that it gets rid of trailing period and uppercases the command name
in the error message.
Back-patch to v14 where the error message exists.
Author: Kyotaro Horiguchi
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/20210819.170315.1413060634876301811.horikyota.ntt@gmail.com
There are two identical error messages about valid value of modulus for
hash partition, in PostgreSQL source code. Commit 0e1275fb07 improved
only one of them so that ambiguous word "positive" was avoided there,
and forgot to improve the other. This commit improves the other.
Which would reduce translator burden.
Back-pach to v11 where the error message exists.
Author: Kyotaro Horiguchi
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/20210819.170315.1413060634876301811.horikyota.ntt@gmail.com
The distance in phrase operator must be an integer value between zero
and MAXENTRYPOS inclusive. But previously the error message about
its valid value included the information about its upper limit
but not lower limit (i.e., zero). This commit improves the error message
so that it also includes the information about its lower limit.
Back-patch to v9.6 where full-text phrase search was supported.
Author: Kyotaro Horiguchi
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/20210819.170315.1413060634876301811.horikyota.ntt@gmail.com
Regexps like "(.){0}...\1" drew an "invalid backreference number".
That's not unreasonable on its face, since the capture group will
never be matched if it's iterated zero times. However, other engines
such as Perl's don't complain about this, nor do we throw an error for
related cases such as "(.)|\1", even though that backref can never
succeed either. Also, if the zero-iterations case happens at runtime
rather than compile time --- say, "(x)*...\1" when there's no "x" to
be found --- that's not an error, we just deem the backref to not
match. Making this even less defensible, no error was thrown for
nested cases such as "((.)){0}...\2"; and to add insult to injury,
those cases could result in assertion failures instead. (It seems
that nothing especially bad happened in non-assert builds, though.)
Let's just fix it so that no error is thrown and instead the backref
is deemed to never match, so that compile-time detection of no
iterations behaves the same as run-time detection.
Per report from Mark Dilger. This appears to be an aboriginal error
in Spencer's library, so back-patch to all supported versions.
Pre-v14, it turns out to also be necessary to back-patch one aspect of
commits cb76fbd7e/00116dee5, namely to create capture-node subREs with
the begin/end states of their subexpressions, not the current lp/rp
of the outer parseqatom invocation. Otherwise delsub complains that
we're trying to disconnect a state from itself. This is a bit scary
but code examination shows that it's safe: in the pre-v14 code, if we
want to wrap iteration around the subexpression, the first thing we do
is overwrite the atom's begin/end fields with new states. So the
bogus values didn't survive long enough to be used for anything, except
if no iteration is required, in which case it doesn't matter.
Discussion: https://postgr.es/m/A099E4A8-4377-4C64-A98C-3DEDDC075502@enterprisedb.com
The current refresh behavior tries to just refresh added/dropped
publications but that leads to removing wrong tables from subscription. We
can't refresh just the dropped publication because it is quite possible
that some of the tables are removed from publication by that time and now
those will remain as part of the subscription. Also, there is a chance
that the tables that were part of the publication being dropped are also
part of another publication, so we can't remove those.
So, we decided that by default, add/drop commands will also act like
REFRESH PUBLICATION which means they will refresh all the publications. We
can keep the old behavior for "add publication" but it is better to be
consistent with "drop publication".
Author: Hou Zhijie
Reviewed-by: Masahiko Sawada, Amit Kapila
Backpatch-through: 14, where it was introduced
Discussion: https://postgr.es/m/OS0PR01MB5716935D4C2CC85A6143073F94EF9@OS0PR01MB5716.jpnprd01.prod.outlook.com
The recursion in cdissect() was careless about clearing match data
for capturing parentheses after rejecting a partial match. This
could allow a later back-reference to succeed when by rights it
should fail for lack of a defined referent.
To fix, think a little more rigorously about what the contract
between different levels of cdissect's recursion needs to be.
With the right spec, we can fix this using fewer rather than more
resets of the match data; the key decision being that a failed
sub-match is now explicitly responsible for clearing any matches
it may have set.
There are enough other cross-checks and optimizations in the code
that it's not especially easy to exhibit this problem; usually, the
match will fail as-expected. Plus, regexps that are even potentially
vulnerable are most likely user errors, since there's just not much
point in writing a back-ref that doesn't always have a referent.
These facts perhaps explain why the issue hasn't been detected,
even though it's almost certainly a couple of decades old.
Discussion: https://postgr.es/m/151435.1629733387@sss.pgh.pa.us
WAL records may span multiple segments, but XLogWrite() does not
wait for the entire record to be written out to disk before
creating archive status files. Instead, as soon as the last WAL page of
the segment is written, the archive status file is created, and the
archiver may process it. If PostgreSQL crashes before it is able to
write and flush the rest of the record (in the next WAL segment), the
wrong version of the first segment file lingers in the archive, which
causes operations such as point-in-time restores to fail.
To fix this, keep track of records that span across segments and ensure
that segments are only marked ready-for-archival once such records have
been completely written to disk.
This has always been wrong, so backpatch all the way back.
Author: Nathan Bossart <bossartn@amazon.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Ryo Matsumura <matsumura.ryo@fujitsu.com>
Reviewed-by: Andrey Borodin <x4mmm@yandex-team.ru>
Discussion: https://postgr.es/m/CBDDFA01-6E40-46BB-9F98-9340F4379505@amazon.com
In a backup manifest, WAL-Ranges stores the range of WAL that is
required for the backup to be valid. pg_verifybackup would then
internally use pg_waldump for the checks based on this data.
When the timeline where the backup started was more than 1 with a
history file looked at for the manifest data generation, the calculation
of the WAL range for the first timeline to check was incorrect. The
previous logic used as start LSN the start position of the first
timeline, but it needs to use the start LSN of the backup. This would
cause failures with pg_verifybackup, or any tools making use of the
backup manifests.
This commit adds a test based on a logic using a self-promoted node,
making it rather cheap.
Author: Kyotaro Horiguchi
Discussion: https://postgr.es/m/20210818.143031.1867083699202617521.horikyota.ntt@gmail.com
Backpatch-through: 13
Improve two places in plpgsql, and one in spi.c, where an error
message would confusingly tell you that you couldn't use a SELECT
query, when what you had written *was* a SELECT query. The actual
problem is that you can't use SELECT ... INTO in these contexts,
but the messages failed to make that apparent. Special-case
SELECT INTO to make these errors more helpful.
Also, fix the same spots in plpgsql, as well as several messages
in exec_eval_expr(), to not quote the entire complained-of query or
expression in the primary error message. That behavior very easily
led to violating our message style guideline about keeping the primary
error message short and single-line. Also, since the important part
of the message was after the inserted text, it could make the real
problem very hard to see. We can report the query or expression as
the first line of errcontext instead.
Per complaint from Roger Mason. Back-patch to v14, since (a) some
of these messages are new in v14 and (b) v14's translatable strings
are still somewhat in flux. The problem's older than that of
course, but I'm hesitant to change the behavior further back.
Discussion: https://postgr.es/m/1914708.1629474624@sss.pgh.pa.us
After detecting a sub-match "dissect" failure (i.e., a backref match
failure) in the i'th sub-match of an iteration node, we should proceed
by adjusting the attempted length of the i'th submatch. As coded,
though, these functions changed the attempted length of the *last*
sub-match, and only after exhausting all possibilities for that would
they back up to adjust the next-to-last sub-match, and then the
second-from-last, etc; all of which is wasted effort, since only
changing the start or length of the i'th sub-match can possibly make
it succeed. This oversight creates the possibility for exponentially
bad performance. Fortunately the problem is masked in most cases by
optimizations or constraints applied elsewhere; which explains why
we'd not noticed it before. But it is possible to reach the problem
with fairly simple, if contrived, regexps.
Oversight in my commit 173e29aa5. That's pretty ancient now,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/1808998.1629412269@sss.pgh.pa.us
Using --quiet in combination with --no-strict-names didn't work as
documented, a warning message was still emitted. Since the --quiet
flag was working in an unconventional way to other utilities, fix
by removing the functionality instead.
Backpatch through 14 where pg_amcheck was introduced.
Bug: 17148
Reported-by: Chen Jiaoqian <chenjq.jy@fujitsu.com>
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://postgr.es/m/17148-b5087318e2b04fc6@postgresql.org
Backpatch-through: 14
transformLockingClause neglected to exclude the pseudo-RTEs for
OLD/NEW when processing a rule's query. This led to odd errors
or even crashes later on. This bug is very ancient, but it's
not terribly surprising that nobody noticed, since the use-case
for SELECT FOR UPDATE in a non-view rule is somewhere between
thin and non-existent. Still, crashing is not OK.
Per bug #17151 from Zhiyong Wu. Thanks to Masahiko Sawada
for analysis of the problem.
Discussion: https://postgr.es/m/17151-c03a3e6e4ec9aadb@postgresql.org
Previously log messages late during shutdown could end up using either another
backend's PgBackendStatus (multi user) or segfault (single user) because
pgstat_get_my_query_id()'s check for !MyBEEntry didn't filter out use after
pgstat_beshutdown_hook().
This became a bug in 4f0b0966c8, but was a bit fishy before. But given
there's no known problematic cases before 14, it doesn't seem worth
backpatching further.
Also fixes a wrong filename in a comment, introduced in e1025044.
Reported-By: Andres Freund <andres@anarazel.de>
Reviewed-By: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://postgr.es/m/Julien Rouhaud <rjuju123@gmail.com>
Backpatch: 14-
This is a combined revert of the following commits:
- c3826f8, a refactoring piece that moved the hex decoding code to
src/common/. This code was cleaned up by aef8948, as it originally
included no overflow checks in the same way as the base64 routines in
src/common/ used by SCRAM, making it unsafe for its purpose.
- aef8948, a more advanced refactoring of the hex encoding/decoding code
to src/common/ that added sanity checks on the result buffer for hex
decoding and encoding. As reported by Hans Buschmann, those overflow
checks are expensive, and it is possible to see a performance drop in
the decoding/encoding of bytea or LOs the longer they are. Simple SQLs
working on large bytea values show a clear difference in perf profile.
- ccf4e27, a cleanup made possible by aef8948.
The reverts of all those commits bring back the performance of hex
decoding and encoding back to what it was in ~13. Fow now and
post-beta3, this is the simplest option.
Reported-by: Hans Buschmann
Discussion: https://postgr.es/m/1629039545467.80333@nidsa.net
Backpatch-through: 14
Recursion into the FILTER clause was mis-implemented, such that a
relevant Var or Aggref at the very top of the FILTER clause would
be ignored. (Of course, that'd have to be a plain boolean Var or
boolean-returning aggregate.) The consequence would be
mis-identification of the correct semantic level of the aggregate,
which could lead to not-per-spec query behavior. If the FILTER
expression is an aggregate, this could also lead to failure to issue
an expected "aggregate function calls cannot be nested" error, which
would likely result in a core dump later on, since the planner and
executor aren't expecting such cases to appear.
The root cause is that commit b560ec1b0 blindly copied some code
that assumed it's recursing into a List, and thus didn't examine the
top-level node. To forestall questions about why this call doesn't
look like the others, as well as possible future copy-and-paste
mistakes, let's change all three check_agg_arguments_walker calls in
check_agg_arguments, even though only the one for the filter clause
is really broken.
Per bug #17152 from Zhiyong Wu. This has been wrong since we
implemented FILTER, so back-patch to all supported versions.
(Testing suggests that pre-v11 branches manage to avoid crashing
in the bad-Aggref case, thanks to "redundant" checks in ExecInitAgg.
But I'm not sure how thorough that protection is, and anyway the
wrong-behavior issue remains, so fix 9.6 and 10 too.)
Discussion: https://postgr.es/m/17152-c7f906cc1a88e61b@postgresql.org
The skip options set for all-visible and all-frozen were incorrect
as they used space rather than hyphen, causing a syntax error when
invoked. Also, the option for not skipping any pages at all, none,
was documented but not implemented.
Backpatch through 14 where pg_amcheck was introduced.
Bug: #17149
Reported-by: Chen Jiaoqian <chenjq.jy@fujitsu.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/17149-5918ea748da36b15@postgresql.org
Backpatch-through: 14
If recordDependencyOnCurrentExtension is invoked on a pre-existing,
free-standing object during an extension update script, that object
will become owned by the extension. In our current code this is
possible in three cases:
* Replacing a "shell" type or operator.
* CREATE OR REPLACE overwriting an existing object.
* ALTER TYPE SET, ALTER DOMAIN SET, and ALTER OPERATOR SET.
The first of these cases is intentional behavior, as noted by the
existing comments for GenerateTypeDependencies. It seems like
appropriate behavior for CREATE OR REPLACE too; at least, the obvious
alternatives are not better. However, the fact that it happens during
ALTER is an artifact of trying to share code (GenerateTypeDependencies
and makeOperatorDependencies) between the CREATE and ALTER cases.
Since an extension script would be unlikely to ALTER an object that
didn't already belong to the extension, this behavior is not very
troubling for the direct target object ... but ALTER TYPE SET will
recurse to dependent domains, and it is very uncool for those to
become owned by the extension if they were not already.
Let's fix this by redefining the ALTER cases to never change extension
membership, full stop. We could minimize the behavioral change by
only changing the behavior when ALTER TYPE SET is recursing to a
domain, but that would complicate the code and it does not seem like
a better definition.
Per bug #17144 from Alex Kozhemyakin. Back-patch to v13 where ALTER
TYPE SET was added. (The other cases are older, but since they only
affect the directly-named object, there's not enough of a problem to
justify changing the behavior further back.)
Discussion: https://postgr.es/m/17144-e67d7a8f049de9af@postgresql.org
In OpenSSL there are two types of BIO's (I/O abstractions):
source/sink and filters. A source/sink BIO is a source and/or
sink of data, ie one acting on a socket or a file. A filter
BIO takes a stream of input from another BIO and transforms it.
In order for BIO_find_type() to be able to traverse the chain
of BIO's and correctly find all BIO's of a certain type they
shall have the type bit set accordingly, source/sink BIO's
(what PostgreSQL implements) use BIO_TYPE_SOURCE_SINK and
filter BIO's use BIO_TYPE_FILTER. In addition to these, file
descriptor based BIO's should have the descriptor bit set,
BIO_TYPE_DESCRIPTOR.
The PostgreSQL implementation didn't set the type bits, which
went unnoticed for a long time as it's only really relevant
for code auditing the OpenSSL installation, or doing similar
tasks. It is required by the API though, so this fixes it.
Backpatch through 9.6 as this has been wrong for a long time.
Author: Itamar Gafni
Discussion: https://postgr.es/m/SN6PR06MB39665EC10C34BB20956AE4578AF39@SN6PR06MB3966.namprd06.prod.outlook.com
Backpatch-through: 9.6
This reverts the following commits:
1b5617eb84 Describe (auto-)analyze behavior for partitioned tables
0e69f705cc Set pg_class.reltuples for partitioned tables
41badeaba8 Document ANALYZE storage parameters for partitioned tables
0827e8af70 autovacuum: handle analyze for partitioned tables
There are efficiency issues in this code when handling databases with
large numbers of partitions, and it doesn't look like there isn't any
trivial way to handle those. There are some other issues as well. It's
now too late in the cycle for nontrivial fixes, so we'll have to let
Postgres 14 users continue to manually deal with ANALYZE their
partitioned tables, and hopefully we can fix the issues for Postgres 15.
I kept [most of] be280cdad2 ("Don't reset relhasindex for partitioned
tables on ANALYZE") because while we added it due to 0827e8af70, it is
a good bugfix in its own right, since it affects manual analyze as well
as autovacuum-induced analyze, and there's no reason to revert it.
I retained the addition of relkind 'p' to tables included by
pg_stat_user_tables, because reverting that would require a catversion
bump.
Also, in pg14 only, I keep a struct member that was added to
PgStat_TabStatEntry to avoid breaking compatibility with existing stat
files.
Backpatch to 14.
Discussion: https://postgr.es/m/20210722205458.f2bug3z6qzxzpx2s@alap3.anarazel.de
This commit ensures that the wait interval in the replay delay loop
waiting for an amount of time defined by recovery_min_apply_delay is
correctly handled on reload, recalculating the delay if this GUC value
is updated, based on the timestamp of the commit record being replayed.
The previous behavior would be problematic for example with replay
still waiting even if the delay got reduced or just cancelled. If the
apply delay was increased to a larger value, the wait would have just
respected the old value set, finishing earlier.
Author: Soumyadeep Chakraborty, Ashwin Agrawal
Reviewed-by: Kyotaro Horiguchi, Michael Paquier
Discussion: https://postgr.es/m/CAE-ML+93zfr-HLN8OuxF0BjpWJ17O5dv1eMvSE5jsj9jpnAXZA@mail.gmail.com
Backpatch-through: 9.6
Like the ARM case, just use gcc's __sync_lock_test_and_set();
that will compile into AMOSWAP.W.AQ which does what we need.
At some point it might be worth doing some work on atomic ops
for RISC-V, but this should be enough for a creditable port.
Back-patch to all supported branches, just in case somebody
wants to try them on RISC-V.
Marek Szuba
Discussion: https://postgr.es/m/dea97b6d-f55f-1f6d-9109-504aa7dfa421@gentoo.org
The check for sslsni only checked for existence of the parameter
but not for the actual value of the param. This meant that the
SNI extension was always turned on. Fix by inspecting the value
of sslsni and only activate the SNI extension iff sslsni has been
enabled. Also update the docs to be more in line with how other
boolean params are documented.
Backpatch to 14 where sslsni was first implemented.
Reviewed-by: Tom Lane
Backpatch-through: 14, where sslni was added
This fixes a bug in simplehash.h which caused an incorrect size mask to be
used when the hash table grew to SH_MAX_SIZE (2^32). The code was
incorrectly setting the size mask to 0 when the hash tables reached the
maximum possible number of buckets. This would result always trying to
use the 0th bucket causing an infinite loop of trying to grow the hash
table due to there being too many collisions.
Seemingly it's not that common for simplehash tables to ever grow this big
as this bug dates back to v10 and nobody seems to have noticed it before.
However, probably the most likely place that people would notice it would
be doing a large in-memory Hash Aggregate with something close to at least
2^31 groups.
After this fix, the code now works correctly with up to within 98% of 2^32
groups and will fail with the following error when trying to insert any
more items into the hash table:
ERROR: hash table size exceeded
However, the work_mem (or hash_mem_multiplier in newer versions) settings
will generally cause Hash Aggregates to spill to disk long before reaching
that many groups. The minimal test case I did took a work_mem setting of
over 192GB to hit the bug.
simplehash hash tables are used in a few other places such as Bitmap Index
Scans, however, again the size that the hash table can become there is
also limited to work_mem and it would take a relation of around 16TB
(2^31) pages and a very large work_mem setting to hit this. With smaller
work_mem values the table would become lossy and never grow large enough
to hit the problem.
Author: Yura Sokolov
Reviewed-by: David Rowley, Ranier Vilela
Discussion: https://postgr.es/m/b1f7f32737c3438136f64b26f4852b96@postgrespro.ru
Backpatch-through: 10, where simplehash.h was added
It's hard to disable ASLR on current macOS releases, for testing with
-DEXEC_BACKEND. You could already set the environment variable
PG_SHMEM_ADDR to something not likely to collide with mappings created
earlier in process startup. Let's also provide a default value that
works on current releases and architectures, for developer convenience.
As noted in the pre-existing comment, this is a horrible hack, but
-DEXEC_BACKEND is only used by Unix-based PostgreSQL developers for
testing some otherwise Windows-only code paths, so it seems excusable.
Back-patch to all supported branches.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20210806032944.m4tz7j2w47mant26%40alap3.anarazel.de
The FDW batching code was using the same tuple descriptor both for all
slots (regular and plan slots), but that's incorrect - the subplan may
use a different descriptor. Currently this is benign, because batching
is used only for INSERTs, and in that case the descriptors always match.
But that would change if we allow batching UPDATEs.
Fix by copying the appropriate tuple descriptor. Backpatch to 14, where
the FDW batching was implemented.
Author: Amit Langote
Backpatch-through: 14, where FDW batching was added
Discussion: https://postgr.es/m/CA%2BHiwqEWd5B0-e-RvixGGUrNvGkjH2s4m95%3DJcwUnyV%3Df0rAKQ%40mail.gmail.com
It's not sensible to re-evaluate a direct-modify Foreign Update or Delete
during EvalPlanQual. However, ExecInitForeignScan() can still get called
if a table mixes local and foreign partitions. EvalPlanQualStart() left
the es_result_relations array uninitialized in the child EPQ EState, but
ExecInitForeignScan() still expected to find it. That caused a segfault.
Fix by skipping the es_result_relations lookup during EvalPlanQual
processing. To make things a bit more robust, also skip the
BeginDirectModify calls, and add a runtime check that ExecForeignScan()
is not called on direct-modify foreign scans during EvalPlanQual
processing.
This is new in v14, commit 1375422c78. Before that, EvalPlanQualStart()
copied the whole ResultRelInfo array to the EPQ EState. Backpatch to v14.
Report and diagnosis by Andrey Lepikhov.
Discussion: https://www.postgresql.org/message-id/cb2b808d-cbaa-4772-76ee-c8809bafcf3d%40postgrespro.ru
This saves a few lines of code. Also add a comment to mention why we use
ExplainPropertyInteger instead of ExplainPropertyUInteger given that
queryid is a uint64 type.
Author: David Rowley
Reviewed-by: Julien Rouhaud
Discussion: https://postgr.es/m/CAApHDvqhSLYpSU_EqUdN39w9Uvb8ogmHV7_3YhJ0S3aScGBjsg@mail.gmail.com
Backpatch-through: 14, where this code was originally added
I had committer's remorse almost immediately after pushing cb76fbd7e,
upon finding that removing capturing subexpressions' subREs from the
data structure broke my proposed patch for REG_NOSUB optimization.
Revert that data structure change. Instead, address the concern
about not changing capturing subREs' endpoints by not changing the
endpoints. We don't need to, because the point of that bit was just
to ensure that the atom has endpoints distinct from the outer state
pair that we're stringing the branch between. We already made
suitable states in the parenthesized-subexpression case, so the
additional ones were just useless overhead. This seems more
understandable than Spencer's original coding, and it ought to be
a shade faster too by saving a few state creations and arc changes.
(I actually see a couple percent improvement on Jacobson's web
corpus, though that's barely above the noise floor so I wouldn't
put much stock in that result.)
Also, fix the logic added by ea1268f63 to ensure that the subRE
recorded in v->subs[subno] is exactly the one with capno == subno.
Spencer's original coding recorded the child subRE of the capture
node, which is okay so far as having the right endpoint states is
concerned, but as of cb76fbd7e the capturing subRE itself always
has those endpoints too. I think the inconsistency is confusing
for the REG_NOSUB optimization.
As before, backpatch to v14.
Discussion: https://postgr.es/m/0203588E-E609-43AF-9F4F-902854231EE7@enterprisedb.com
Up to now, we remembered the definition of a capturing parenthesis
subexpression by storing a pointer to the associated subRE node.
That was okay before, because that subRE didn't get modified anymore
while parsing the rest of the regexp. However, in the wake of
commit ea1268f63, that's no longer true: the outer invocation of
parseqatom() feels free to scribble on that subRE. This seems to
work anyway, because the states we jam into the child atom in the
"prepare a general-purpose state skeleton" stanza aren't really
semantically different from the original endpoints of the child atom.
But that would be mighty easy to break, and it's definitely not how
things worked before.
Between this and the issue fixed in the prior commit, it seems best
to get rid of this dependence on subRE nodes entirely. We don't need
the whole child subRE for future backrefs, only its starting and ending
NFA states; so let's just store pointers to those.
Also, in the corner case where we make an extra subRE to handle
immediately-nested capturing parentheses, it seems like it'd be smart
to have the extra subRE have the same begin/end states as the original
child subRE does (s/s2 not lp/rp). I think that linking it from lp to
rp might actually be semantically wrong, though since Spencer's original
code did it that way, I'm not totally certain. Using s/s2 is certainly
not wrong, in any case.
Per report from Mark Dilger. Back-patch to v14 where the problematic
patches came in.
Discussion: https://postgr.es/m/0203588E-E609-43AF-9F4F-902854231EE7@enterprisedb.com
Commit cebc1d34e taught parseqatom() to optimize cases where a branch
contains only one, "messy", atom by getting rid of excess subRE nodes.
The way we really should do that is to keep the subRE built for the
"messy" child atom; but to avoid changing parseqatom's nominal API,
I made it delete that node after copying its fields to the outer subRE
made by parsebranch(). It seems that that actually worked at the time;
but it became dangerous after ea1268f63, because that later commit
allowed the lower invocation of parse() to return a subRE that was also
pointed to by some v->subs[] entry. This meant we could wind up with a
dangling pointer in v->subs[], allowing a later backref to misbehave,
but only if that subRE struct had been reused in between. So the damage
seems confined to cases like '((...))...(...\2'.
To fix, do what I should have done before and modify parseqatom's API
to make it possible for it to remove the caller's subRE instead of the
callee's. That's safer because we know that subRE isn't complete yet,
so noplace else will have a pointer to it.
Per report from Mark Dilger. Back-patch to v14 where the problematic
patches came in.
Discussion: https://postgr.es/m/0203588E-E609-43AF-9F4F-902854231EE7@enterprisedb.com
Rather than trying to pick table aliases that won't conflict with
any possible user-defined matview column name, adjust the queries'
syntax so that the aliases are only used in places where they can't be
mistaken for column names. Mostly this consists of writing "alias.*"
not just "alias", which adds clarity for humans as well as machines.
We do have the issue that "SELECT alias.*" acts differently from
"SELECT alias", but we can use the same hack ruleutils.c uses for
whole-row variables in SELECT lists: write "alias.*::compositetype".
We might as well revert to the original aliases after doing this;
they're a bit easier to read.
Like 75d66d10e, back-patch to all supported branches.
Discussion: https://postgr.es/m/2488325.1628261320@sss.pgh.pa.us
Casting a value that's already of a type with a specific typmod
to an unspecified typmod doesn't do anything so far as run-time
behavior is concerned. However, it really ought to change the
exposed type of the expression to match. Up to now,
coerce_type_typmod hasn't bothered with that, which creates gotchas
in contexts such as recursive unions. If for example one side of
the union is numeric(18,3), but it needs to be plain numeric to
match the other side, there's no direct way to express that.
This is easy enough to fix, by inserting a RelabelType to update the
exposed type of the expression. However, it's a bit nervous-making
to change this behavior, because it's stood for a really long time.
(I strongly suspect that it's like this in part because the logic
pre-dates the introduction of RelabelType in 7.0. The commit log
message for 57b30e8e2 is interesting reading here.) As a compromise,
we'll sneak the change into 14beta3, and consider back-patching to
stable branches if no complaints emerge in the next three months.
Discussion: https://postgr.es/m/CABNQVagu3bZGqiTjb31a8D5Od3fUMs7Oh3gmZMQZVHZ=uWWWfQ@mail.gmail.com
Formerly, the numeric code tested whether an integer value of a larger
type would fit in a smaller type by casting it to the smaller type and
then testing if the reverse conversion produced the original value.
That's perfectly fine, except that it caused a test failure on
buildfarm animal castoroides, most likely due to a compiler bug.
Instead, do these tests by comparing against PG_INT16/32_MIN/MAX. That
matches existing code in other places, such as int84(), which is more
widely tested, and so is less likely to go wrong.
While at it, add regression tests covering the numeric-to-int8/4/2
conversions, and adjust the recently added tests to the style of
434ddfb79a (on the v11 branch) to make failures easier to diagnose.
Per buildfarm via Tom Lane, reviewed by Tom Lane.
Discussion: https://postgr.es/m/2394813.1628179479%40sss.pgh.pa.us
This fixes a long-standing bug when using to_char() to format a
numeric value in scientific notation -- if the value's exponent is
less than -NUMERIC_MAX_DISPLAY_SCALE-1 (-1001), it produced a
division-by-zero error.
The reason for this error was that get_str_from_var_sci() divides its
input by 10^exp, which it produced using power_var_int(). However, the
underflow test in power_var_int() causes it to return zero if the
result scale is too small. That's not a problem for power_var_int()'s
only other caller, power_var(), since that limits the rscale to 1000,
but in get_str_from_var_sci() the exponent can be much smaller,
requiring a much larger rscale. Fix by introducing a new function to
compute 10^exp directly, with no rscale limit. This also allows 10^exp
to be computed more efficiently, without any numeric multiplication,
division or rounding.
Discussion: https://postgr.es/m/CAEZATCWhojfH4whaqgUKBe8D5jNHB8ytzemL-PnRx+KCTyMXmg@mail.gmail.com
Up to now we did a PQconsumeInput() for each pipelined query, asking the OS
for more input - which it often won't have, as all results might already have
been sent. That turns out to have a noticeable performance impact.
Alvaro Herrera reviewed the idea to add the PQisBusy() check, but not this
concrete patch.
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20210720180039.23rivhdft3l4mayn@alap3.anarazel.de
Backpatch: 14, where libpq/pgbench pipelining was introduced.
Oversight in commit 3499df0d, which generalized the reloption as a way
of giving users a way to consistently avoid VACUUM's index bypass
optimization.
Per off-list report from Nikolay Shaplov.
Backpatch: 14-, where index cleanup reloption was extended.
I failed to account for the possibility that when
ExecAppendAsyncEventWait() notifies multiple async-capable nodes using
postgres_fdw, a preceding node might invoke process_pending_request() to
process a pending asynchronous request made by a succeeding node. In
that case the succeeding node should produce a tuple to return to the
parent Append node from tuples fetched by process_pending_request() when
notified. Repair.
Per buildfarm via Michael Paquier. Back-patch to v14, like the previous
commit.
Thanks to Tom Lane for testing.
Discussion: https://postgr.es/m/YQP0UPT8KmPiHTMs%40paquier.xyz
As of commit 84f5c2908, executing SQL commands (via SPI or otherwise)
requires having either an active Portal, or a caller-established
active snapshot. We were simply Assert'ing that that's the case.
But we've now had a couple different reports of people testing
extensions that didn't meet this requirement, and were confused by
the resulting crash. Let's convert the Assert to a test-and-elog,
in hopes of making the issue clearer for extension authors.
Per gripes from Liu Huailing and RekGRpth. Back-patch to v11,
like the prior commit.
Discussion: https://postgr.es/m/OSZPR01MB6215671E3C5956A034A080DFBEEC9@OSZPR01MB6215.jpnprd01.prod.outlook.com
Discussion: https://postgr.es/m/17035-14607d308ac8643c@postgresql.org
This fixes a couple of related problems that arise when raising
numbers to very large powers.
Firstly, when raising a negative number to a very large integer power,
the result should be well-defined, but the previous code would only
cope if the exponent was small enough to go through power_var_int().
Otherwise it would throw an internal error, attempting to take the
logarithm of a negative number. Fix this by adding suitable handling
to the general case in power_var() to cope with negative bases,
checking for integer powers there.
Next, when raising a (positive or negative) number whose absolute
value is slightly less than 1 to a very large power, the result should
approach zero as the power is increased. However, in some cases, for
sufficiently large powers, this would lose all precision and return 1
instead of 0. This was due to the way that the local_rscale was being
calculated for the final full-precision calculation:
local_rscale = rscale + (int) val - ln_dweight + 8
The first two terms on the right hand side are meant to give the
number of significant digits required in the result ("val" being the
estimated result weight). However, this failed to account for the fact
that rscale is clipped to a maximum of NUMERIC_MAX_DISPLAY_SCALE
(1000), and the result weight might be less then -1000, causing their
sum to be negative, leading to a loss of precision. Fix this by
forcing the number of significant digits calculated to be nonnegative.
It's OK for it to be zero (when the result weight is less than -1000),
since the local_rscale value then includes a few extra digits to
ensure an accurate result.
Finally, add additional underflow checks to exp_var() and power_var(),
so that they consistently return zero for cases like this where the
result is indistinguishable from zero. Some paths through this code
already returned zero in such cases, but others were throwing overflow
errors.
Dean Rasheed, reviewed by Yugo Nagata.
Discussion: http://postgr.es/m/CAEZATCW6Dvq7+3wN3tt5jLj-FyOcUgT5xNoOqce5=6Su0bCR0w@mail.gmail.com
CheckpointLock was removed in commit d18e75664a, and commit ce197e91d0
updated a leftover comment in CreateCheckPoint, but there was another
copy of it in CreateRestartPoint still.
A pending asynchronous request is handled by process_pending_request(),
which previously not only processed an in-progress remote query but
performed ExecForeignScan() to produce a tuple to return to the local
server asynchronously from the result of the remote query. But that led
to a server crash when executing a query or led to an "InstrStartNode
called twice in a row" or "InstrEndLoop called on running node" failure
when doing EXPLAIN ANALYZE of it, in cases where the plan tree for it
contained multiple async-capable nodes accessing the same
initplan/subplan that contained multiple async-capable nodes scanning
the same foreign tables as for the parent async-capable nodes, as
reported by Andrey Lepikhov. The reason is that the second step in
process_pending_request() invoked when executing the initplan/subplan
for one of the parent async-capable nodes caused recursive execution of
the initplan/subplan for another of the parent async-capable nodes.
To fix, split process_pending_request() into the two steps and postpone
the second step until ForeignAsyncConfigureWait() is called for each of
the pending asynchronous requests. Also, in ExecAppendAsyncEventWait()
we assumed that FDWs would register at least one wait event in a
WaitEventSet created there when they were called from
ForeignAsyncConfigureWait() in that function, but allow FDWs to register
zero wait events in the WaitEventSet; modify ExecAppendAsyncEventWait()
to just return in that case.
Oversight in commit 27e1f1456. Back-patch to v14 where that commit went
in.
Andrey Lepikhov and Etsuro Fujita
Discussion: https://postgr.es/m/fe5eaa19-1704-e4a4-76ee-3b9d37ade399@postgrespro.ru
Buildfarm shows that this test has a further failure mode when a
checkpoint starts earlier than expected, so we detect a "checkpoint
completed" line that's not the one we want. Change the config to try
and prevent this.
Per buildfarm
While at it, update one comment that was forgotten in commit
d18e75664a.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20210729.162038.534808353849568395.horikyota.ntt@gmail.com
Commit ffa2e4670 changed libpq so that multiple error reports
occurring during one operation (a connection attempt or query)
are accumulated in conn->errorMessage, where before new ones
usually replaced any prior error. At least in theory, that makes
us more vulnerable to running out of memory for the errorMessage
buffer. If it did happen, the user would be left with just an
empty-string error report, which is pretty unhelpful.
We can improve this by relying on pqexpbuffer.c's existing "broken
buffer" convention to track whether we've hit OOM for the current
operation's error string, and then substituting a constant "out of
memory" string in the small number of places where the errorMessage
is read out.
While at it, apply the same method to similar OOM cases in
pqInternalNotice and pqGetErrorNotice3.
Back-patch to v14 where ffa2e4670 came in. In principle this could
go back further; but in view of the lack of field reports, the
hazard seems negligible in older branches.
Discussion: https://postgr.es/m/530153.1627425648@sss.pgh.pa.us
Certain versions of msys2/Windows have been observed to resolve symlinks
in perl2host rather than just follow them. This defeats using a
symlinked shorter path to a longer path, and makes certain tests fail.
We therefore call perl2host on the parent directory of the symlink and
thereafter just use that result.
Apply to release 14 where the problem has been observed.
Sometimes cygpath has been observed to return a path with a trailing
slash. That can cause problems, Also, make "cygpath" usage
consistent with "pwd -W" with respect to the use of forward slashes.
Backpatch to release 14 where the current code was introduced.
pg_verifybackup needs by default pg_waldump to check after a range of
WAL segments required for a backup, except if --no-parse-wal is
specified. The code checked for the presence of the binary pg_waldump
in an installation and reported an error, but it forgot to properly
exit(). This could lead to confusing errors reported.
Reviewed-by: Robert Haas, Fabien Coelho
Discussion: https://postgr.es/m/YQDMdB+B68yePFeT@paquier.xyz
Backpatch-through: 13
If a file is truncated, we must update minRecoveryPoint. Once a file is
truncated, there's no going back; it would not be safe to stop recovery
at a point earlier than that anymore.
Commit 7bffc9b7bf changed xact_redo_commit() so that it updates
minRecoveryPoint on truncation, but forgot to change xact_redo_abort().
Back-patch to all supported versions.
Reported-by: mengjuan.cmj@alibaba-inc.com
Author: Fujii Masao
Reviewed-by: Heikki Linnakangas
Discussion: https://postgr.es/m/b029fce3-4fac-4265-968e-16f36ff4d075.mengjuan.cmj@alibaba-inc.com
This changes the behavior of examining the pg_file_settings view after
changing a config option that requires restart. The user needs to know
that any change of such options does not take effect until a restart,
and this worked correctly if the line is edited without removing it.
However, for the case where the line is removed altogether, the flag
doesn't get set, because a flag was only set in set_config_option, but
that's not called for lines removed. Repair.
(Ref.: commits 62d16c7fc5 and a486e35706)
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/202107262302.xsfdfc5sb7sh@alvherre.pgsql
We failed to deal with an UNKNOWN-type input for
anycompatiblemultirange; that should throw an error indicating
that we don't know how to resolve the multirange type.
We also failed to infer the type of an anycompatiblerange output
from an anycompatiblemultirange input or vice versa.
Per bug #17066 from Alexander Lakhin. Back-patch to v14
where multiranges were added.
Discussion: https://postgr.es/m/17066-16a37f6223a8470b@postgresql.org
The error messages using the word "non-negative" are confusing
because it's ambiguous about whether it accepts zero or not.
This commit improves those error messages by replacing it with
less ambiguous word like "greater than zero" or
"greater than or equal to zero".
Also this commit added the note about the word "non-negative" to
the error message style guide, to help writing the new error messages.
When postgres_fdw option fetch_size was set to zero, previously
the error message "fetch_size requires a non-negative integer value"
was reported. This error message was outright buggy. Therefore
back-patch to all supported versions where such buggy error message
could be thrown.
Reported-by: Hou Zhijie
Author: Bharath Rupireddy
Reviewed-by: Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/OS0PR01MB5716415335A06B489F1B3A8194569@OS0PR01MB5716.jpnprd01.prod.outlook.com
Add pg_resetxlog -u option to set the oldest xid in pg_control.
Previously -x set this value be -2 billion less than the -x value.
However, this causes the server to immediately scan all relation's
relfrozenxid so it can advance pg_control's oldest xid to be inside the
autovacuum_freeze_max_age range, which is inefficient and might disrupt
diagnostic recovery. pg_upgrade will use this option to better create
the new cluster to match the old cluster.
Reported-by: Jason Harvey, Floris Van Nee
Discussion: https://postgr.es/m/20190615183759.GB239428@rfd.leadboat.com, 87da83168c644fd9aae38f546cc70295@opammb0562.comp.optiver.com
Author: Bertrand Drouvot
Backpatch-through: 9.6
Commit ad600bba04 added psql command \dX listing extended statistics
objects, but it failed to consider search_path when selecting the
elements so some of the returned elements might be invisible.
The visibility was already considered for tab completion (added by
commit d99d58cdc8), so adding it to the query is fairly simple.
Reported and fix by Justin Pryzby, regression tests by me. Backpatch
to PostgreSQL 14, where \dX was introduced.
Batchpatch-through: 14
Author: Justin Pryzby
Reviewed-by: Tatsuro Yamada
Discussion: https://postgr.es/m/c027a541-5856-75a5-0868-341301e1624b%40nttcom.co.jp_1
Adjust the header comment in get_agg_clause_costs so that it matches what
the function currently does. No recursive searching has been done ever
since 0a2bc5d61. It also does not determine the aggtranstype like the
comment claimed. That's all done in preprocess_aggref().
preprocess_aggref also now determines the numOrderedAggs, so remove the
mention that get_agg_clause_costs also calculates "counts".
Normally, since this is just an adjustment of a comment it might not be
worth back-patching, but since this code is new to PG14 and that version
is still in beta, then it seems worth having the comments match.
Discussion: https://postgr.es/m/CAApHDvrrGrTJFPELrjx0CnDtz9B7Jy2XYW3Z2BKifAWLSaJYwQ@mail.gmail.com
Backpatch-though: 14
These have been introduced by 7fbe0c8, and could happen for
pg_basebackup and pg_receivewal.
Per report from Coverity for the ones in walmethods.c, I have spotted
the ones in receivelog.c after more review.
Backpatch-through: 10
The point of introducing the hash_mem_multiplier GUC was to let users
reproduce the old behavior of hash aggregation, i.e. that it could use
more than work_mem at need. However, the implementation failed to get
the job done on Win64, where work_mem is clamped to 2GB to protect
various places that calculate memory sizes using "long int". As
written, the same clamp was applied to hash_mem. This resulted in
severe performance regressions for queries requiring a bit more than
2GB for hash aggregation, as they now spill to disk and there's no
way to stop that.
Getting rid of the work_mem restriction seems like a good idea, but
it's a big job and could not conceivably be back-patched. However,
there's only a fairly small number of places that are concerned with
the hash_mem value, and it turns out to be possible to remove the
restriction there without too much code churn or any ABI breaks.
So, let's do that for now to fix the regression, and leave the
larger task for another day.
This patch does introduce a bit more infrastructure that should help
with the larger task, namely pg_bitutils.h support for working with
size_t values.
Per gripe from Laurent Hasson. Back-patch to v13 where the
behavior change came in.
Discussion: https://postgr.es/m/997817.1627074924@sss.pgh.pa.us
Discussion: https://postgr.es/m/MN2PR15MB25601E80A9B6D1BA6F592B1985E39@MN2PR15MB2560.namprd15.prod.outlook.com
